mb/google/hatch: Enable audio support

Following changes are done to enable audio support on hatch
1. Enable I2C4 device at 400Khz at 1.8V
2. Configure GPIO for HP INT and SPKR_PA_EN
3. Add ACPI entry for RT5682 and MAX98357A
4. Enable I2S0 and I2S1 lines
5. Enable generic max98357a driver in Kconfig

BUG=b:123738217
BRANCH=none
TEST=Check SSDT table for RT5682 & MAX98357a entry.
     Verify audio using Sound Open firmware (SOF)

Change-Id: I93f3917c19cc3f0f8fd7b5e1b4d9b24a59f45f84
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>

3 files changed, 34 insertions, 4 deletions

diff --git a/src/mainboard/google/hatch/Kconfig b/src/mainboard/google/hatch/Kconfig
index 2290d8c7b8..7902a04cac 100644
--- a/src/mainboard/google/hatch/Kconfig
+++ b/src/mainboard/google/hatch/Kconfig
@@ -2,6 +2,7 @@
 config BOARD_GOOGLE_BASEBOARD_HATCH
 	def_bool n
 	select BOARD_ROMSIZE_KB_32768
+	select DRIVERS_GENERIC_MAX98357A
 	select DRIVERS_I2C_GENERIC
 	select DRIVERS_I2C_HID
 	select DRIVERS_SPI_ACPI
diff --git a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
index e2c3392eef..16a0ef134f 100644
--- a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
@@ -27,6 +27,7 @@ chip soc/intel/cannonlake
 	#|                   | before memory is up       |
 	#| I2C0              | Touchpad                  |
 	#| I2C1              | Touch screen              |
+	#| I2C4              | Audio                     |
 	#+-------------------+---------------------------+
 	register "common_soc_config" = "{
 		.gspi[0] = {
@@ -39,6 +40,9 @@ chip soc/intel/cannonlake
 		.i2c[1] = {
 			.speed = I2C_SPEED_FAST,
 		},
+                .i2c[4] = {
+                        .speed = I2C_SPEED_FAST,
+                },
 	}"
 
 	# FSP configuration
@@ -97,6 +101,12 @@ chip soc/intel/cannonlake
 	register "PcieClkSrcUsage[3]" = "13"
 	register "PcieClkSrcClkReq[3]" = "3"
 
+	#Enable I2S Audio, SSP0, SSP1 and DMIC0
+	register "PchHdaDspEnable" = "1"
+	register "PchHdaAudioLinkSsp0" = "1"
+	register "PchHdaAudioLinkSsp1" = "1"
+	register "PchHdaAudioLinkDmic0" = "1"
+
 	device cpu_cluster 0 on
 		device lapic 0 on end
 	end
@@ -229,7 +239,20 @@ chip soc/intel/cannonlake
 		device pci 16.4 off end # Management Engine Interface 3
 		device pci 16.5 off end # Management Engine Interface 4
 		device pci 17.0 on  end # SATA
-		device pci 19.0 on  end # I2C #4
+		device pci 19.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Realtek RT5682""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_H0_IRQ)"
+				register "property_count" = "1"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
+		end #I2C #4
 		device pci 19.1 off end # I2C #5
 		device pci 19.2 off end # UART #2
 		device pci 1a.0 off end # eMMC
@@ -270,7 +293,13 @@ chip soc/intel/cannonlake
 		end # eSPI Interface
 		device pci 1f.1 on  end # P2SB
 		device pci 1f.2 on  end # Power Management Controller
-		device pci 1f.3 off end # Intel HDA
+		device pci 1f.3 on
+			chip drivers/generic/max98357a
+				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H3)"
+				register "sdmode_delay" = "5"
+				device generic 0 on end
+			end
+		end # Intel HDA
 		device pci 1f.4 on  end # SMBus
 		device pci 1f.5 on  end # PCH SPI
 		device pci 1f.6 off end # GbE
diff --git a/src/mainboard/google/hatch/variants/baseboard/gpio.c b/src/mainboard/google/hatch/variants/baseboard/gpio.c
index 35dd912945..091f6b8b30 100644
--- a/src/mainboard/google/hatch/variants/baseboard/gpio.c
+++ b/src/mainboard/google/hatch/variants/baseboard/gpio.c
@@ -343,7 +343,7 @@ static const struct pad_config gpio_table[] = {
 	PAD_NC(GPP_G7, DN_20K),
 
 	/*
-	 * H0  : AUDIO IRQ
+	 * H0  : HP_INT_L
 	 * TODO Configure it back to invert mode, when
 	 * ITSS IPCx configuration is fixed in FSP.
 	 */
@@ -352,7 +352,7 @@ static const struct pad_config gpio_table[] = {
 	PAD_CFG_NF(GPP_H1, NONE, DEEP, NF3),
 	/* H2  : CNV_CLKREQ0 */
 	PAD_CFG_NF(GPP_H2, NONE, DEEP, NF3),
-	/* H3  : SPEAKER SD MODE ENABLE */
+	/* H3  : SPKR_PA_EN */
 	PAD_CFG_GPO(GPP_H3, 0, DEEP),
 	/* H4  : PCH_I2C_PEN_SDA */
 	PAD_NC(GPP_H4, NONE),