sb/intel/ibexpeak: Use common Intel SMM code

TODO in followup patch: Some not mainboard specific things should be
moved out of mainboard_smi_apmc.

Change-Id: Ifc2d8f7755ace598e66b162d071d472093e4656e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/26296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

7 files changed, 17 insertions, 1033 deletions

diff --git a/src/mainboard/lenovo/x201/smihandler.c b/src/mainboard/lenovo/x201/smihandler.c
index e733b3b5fe..fc6a0e9670 100644
--- a/src/mainboard/lenovo/x201/smihandler.c
+++ b/src/mainboard/lenovo/x201/smihandler.c
@@ -19,7 +19,7 @@
 #include <console/console.h>
 #include <cpu/x86/smm.h>
 #include <southbridge/intel/ibexpeak/nvs.h>
-#include <southbridge/intel/ibexpeak/pch.h>
+#include <southbridge/intel/common/pmutil.h>
 #include <southbridge/intel/ibexpeak/me.h>
 #include <southbridge/intel/common/finalize.h>
 #include <northbridge/intel/nehalem/nehalem.h>
diff --git a/src/mainboard/packardbell/ms2290/smihandler.c b/src/mainboard/packardbell/ms2290/smihandler.c
index ff13543cde..83562be921 100644
--- a/src/mainboard/packardbell/ms2290/smihandler.c
+++ b/src/mainboard/packardbell/ms2290/smihandler.c
@@ -18,9 +18,9 @@
 #include <cpu/x86/smm.h>
 #include <device/pci_ops.h>
 #include <southbridge/intel/ibexpeak/nvs.h>
-#include <southbridge/intel/ibexpeak/pch.h>
 #include <southbridge/intel/ibexpeak/me.h>
 #include <southbridge/intel/common/finalize.h>
+#include <southbridge/intel/common/pmutil.h>
 #include <northbridge/intel/nehalem/nehalem.h>
 #include <cpu/intel/model_2065x/model_2065x.h>
 #include <ec/acpi/ec.h>
diff --git a/src/southbridge/intel/ibexpeak/Kconfig b/src/southbridge/intel/ibexpeak/Kconfig
index 4763133b80..85c89799e0 100644
--- a/src/southbridge/intel/ibexpeak/Kconfig
+++ b/src/southbridge/intel/ibexpeak/Kconfig
@@ -32,6 +32,7 @@ config SOUTH_BRIDGE_OPTIONS # dummy
 	select SOUTHBRIDGE_INTEL_COMMON_RCBA_PIRQ
 	select SOUTHBRIDGE_INTEL_COMMON_SMBUS
 	select SOUTHBRIDGE_INTEL_COMMON_SPI
+	select SOUTHBRIDGE_INTEL_COMMON_SMM
 	select HAVE_USBDEBUG_OPTIONS
 	select COMMON_FADT
 	select ACPI_SATA_GENERATOR
diff --git a/src/southbridge/intel/ibexpeak/Makefile.inc b/src/southbridge/intel/ibexpeak/Makefile.inc
index 2fb371841a..24eac22b9f 100644
--- a/src/southbridge/intel/ibexpeak/Makefile.inc
+++ b/src/southbridge/intel/ibexpeak/Makefile.inc
@@ -35,7 +35,6 @@ ramstage-y += ../bd82x6x/me_status.c
 ramstage-$(CONFIG_ELOG) += ../bd82x6x/elog.c
 ramstage-y += madt.c
 
-ramstage-y += smi.c
 smm-y += smihandler.c me.c ../bd82x6x/me_8.x.c ../bd82x6x/pch.c
 
 romstage-y += ../bd82x6x/early_usb.c early_smbus.c ../bd82x6x/early_me.c ../bd82x6x/me_status.c ../common/gpio.c early_thermal.c
diff --git a/src/southbridge/intel/ibexpeak/pch.h b/src/southbridge/intel/ibexpeak/pch.h
index 9b2dd8ac8e..90e7102ed2 100644
--- a/src/southbridge/intel/ibexpeak/pch.h
+++ b/src/southbridge/intel/ibexpeak/pch.h
@@ -61,7 +61,6 @@ int pch_silicon_revision(void);
 int pch_silicon_type(void);
 int pch_silicon_supported(int type, int rev);
 void pch_iobp_update(u32 address, u32 andvalue, u32 orvalue);
-void gpi_route_interrupt(u8 gpi, u8 mode);
 #if CONFIG(ELOG)
 void pch_log_state(void);
 #endif
diff --git a/src/southbridge/intel/ibexpeak/smi.c b/src/southbridge/intel/ibexpeak/smi.c
deleted file mode 100644
index 4c9f2ac26d..0000000000
--- a/src/southbridge/intel/ibexpeak/smi.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#define __SIMPLE_DEVICE__
-
-#include <device/device.h>
-#include <device/pci.h>
-#include <console/console.h>
-#include <arch/io.h>
-#include <device/pci_ops.h>
-#include <cpu/x86/cache.h>
-#include <cpu/x86/smm.h>
-#include <cpu/intel/smm/gen1/smi.h>
-#include "pch.h"
-
-/* While we read PMBASE dynamically in case it changed, let's
- * initialize it with a sane value
- */
-static u16 pmbase = DEFAULT_PMBASE;
-
-/**
- * @brief read and clear PM1_STS
- * @return PM1_STS register
- */
-static u16 reset_pm1_status(void)
-{
-	u16 reg16;
-
-	reg16 = inw(pmbase + PM1_STS);
-	/* set status bits are cleared by writing 1 to them */
-	outw(reg16, pmbase + PM1_STS);
-
-	return reg16;
-}
-
-static void dump_pm1_status(u16 pm1_sts)
-{
-	printk(BIOS_DEBUG, "PM1_STS: ");
-	if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK ");
-	if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK ");
-	if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR ");
-	if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC ");
-	if (pm1_sts & (1 <<  8)) printk(BIOS_DEBUG, "PWRBTN ");
-	if (pm1_sts & (1 <<  5)) printk(BIOS_DEBUG, "GBL ");
-	if (pm1_sts & (1 <<  4)) printk(BIOS_DEBUG, "BM ");
-	if (pm1_sts & (1 <<  0)) printk(BIOS_DEBUG, "TMROF ");
-	printk(BIOS_DEBUG, "\n");
-}
-
-/**
- * @brief read and clear SMI_STS
- * @return SMI_STS register
- */
-static u32 reset_smi_status(void)
-{
-	u32 reg32;
-
-	reg32 = inl(pmbase + SMI_STS);
-	/* set status bits are cleared by writing 1 to them */
-	outl(reg32, pmbase + SMI_STS);
-
-	return reg32;
-}
-
-static void dump_smi_status(u32 smi_sts)
-{
-	printk(BIOS_DEBUG, "SMI_STS: ");
-	if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
-	if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
-	if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
-	if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
-	if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
-	if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
-	if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
-	if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
-	if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
-	if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
-	if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
-	if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
-	if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
-	if (smi_sts & (1 <<  9)) printk(BIOS_DEBUG, "GPE0 ");
-	if (smi_sts & (1 <<  8)) printk(BIOS_DEBUG, "PM1 ");
-	if (smi_sts & (1 <<  6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
-	if (smi_sts & (1 <<  5)) printk(BIOS_DEBUG, "APM ");
-	if (smi_sts & (1 <<  4)) printk(BIOS_DEBUG, "SLP_SMI ");
-	if (smi_sts & (1 <<  3)) printk(BIOS_DEBUG, "LEGACY_USB ");
-	if (smi_sts & (1 <<  2)) printk(BIOS_DEBUG, "BIOS ");
-	printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear GPE0_STS
- * @return GPE0_STS register
- */
-static u32 reset_gpe0_status(void)
-{
-	u32 reg32;
-
-	reg32 = inl(pmbase + GPE0_STS);
-	/* set status bits are cleared by writing 1 to them */
-	outl(reg32, pmbase + GPE0_STS);
-
-	return reg32;
-}
-
-static void dump_gpe0_status(u32 gpe0_sts)
-{
-	int i;
-	printk(BIOS_DEBUG, "GPE0_STS: ");
-	for (i=31; i>= 16; i--) {
-		if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
-	}
-	if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
-	if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
-	if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
-	if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
-	if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
-	if (gpe0_sts & (1 <<  9)) printk(BIOS_DEBUG, "PCI_EXP ");
-	if (gpe0_sts & (1 <<  8)) printk(BIOS_DEBUG, "RI ");
-	if (gpe0_sts & (1 <<  7)) printk(BIOS_DEBUG, "SMB_WAK ");
-	if (gpe0_sts & (1 <<  6)) printk(BIOS_DEBUG, "TCO_SCI ");
-	if (gpe0_sts & (1 <<  5)) printk(BIOS_DEBUG, "AC97 ");
-	if (gpe0_sts & (1 <<  4)) printk(BIOS_DEBUG, "USB2 ");
-	if (gpe0_sts & (1 <<  3)) printk(BIOS_DEBUG, "USB1 ");
-	if (gpe0_sts & (1 <<  2)) printk(BIOS_DEBUG, "HOT_PLUG ");
-	if (gpe0_sts & (1 <<  0)) printk(BIOS_DEBUG, "THRM ");
-	printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear ALT_GP_SMI_STS
- * @return ALT_GP_SMI_STS register
- */
-static u16 reset_alt_gp_smi_status(void)
-{
-	u16 reg16;
-
-	reg16 = inl(pmbase + ALT_GP_SMI_STS);
-	/* set status bits are cleared by writing 1 to them */
-	outl(reg16, pmbase + ALT_GP_SMI_STS);
-
-	return reg16;
-}
-
-static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts)
-{
-	int i;
-	printk(BIOS_DEBUG, "ALT_GP_SMI_STS: ");
-	for (i=15; i>= 0; i--) {
-		if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", i);
-	}
-	printk(BIOS_DEBUG, "\n");
-}
-
-
-
-/**
- * @brief read and clear TCOx_STS
- * @return TCOx_STS registers
- */
-static u32 reset_tco_status(void)
-{
-	u32 tcobase = pmbase + 0x60;
-	u32 reg32;
-
-	reg32 = inl(tcobase + 0x04);
-	/* set status bits are cleared by writing 1 to them */
-	outl(reg32 & ~(1 << 18), tcobase + 0x04); //  Don't clear BOOT_STS before SECOND_TO_STS
-	if (reg32 & (1 << 18))
-		outl(reg32 & (1 << 18), tcobase + 0x04); // clear BOOT_STS
-
-	return reg32;
-}
-
-
-static void dump_tco_status(u32 tco_sts)
-{
-	printk(BIOS_DEBUG, "TCO_STS: ");
-	if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
-	if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
-	if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
-	if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
-	if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
-	if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
-	if (tco_sts & (1 <<  9)) printk(BIOS_DEBUG, "DMISCI ");
-	if (tco_sts & (1 <<  8)) printk(BIOS_DEBUG, "BIOSWR ");
-	if (tco_sts & (1 <<  7)) printk(BIOS_DEBUG, "NEWCENTURY ");
-	if (tco_sts & (1 <<  3)) printk(BIOS_DEBUG, "TIMEOUT ");
-	if (tco_sts & (1 <<  2)) printk(BIOS_DEBUG, "TCO_INT ");
-	if (tco_sts & (1 <<  1)) printk(BIOS_DEBUG, "SW_TCO ");
-	if (tco_sts & (1 <<  0)) printk(BIOS_DEBUG, "NMI2SMI ");
-	printk(BIOS_DEBUG, "\n");
-}
-
-
-
-/**
- * @brief Set the EOS bit
- */
-static void smi_set_eos(void)
-{
-	u8 reg8;
-
-	reg8 = inb(pmbase + SMI_EN);
-	reg8 |= EOS;
-	outb(reg8, pmbase + SMI_EN);
-}
-
-void southbridge_smm_init(void)
-{
-	u32 smi_en;
-	u16 pm1_en;
-	u32 gpe0_en;
-
-#if CONFIG(ELOG)
-	/* Log events from chipset before clearing */
-	pch_log_state();
-#endif
-
-	printk(BIOS_DEBUG, "Initializing southbridge SMI...");
-
-	pmbase = pci_read_config32(PCI_DEV(0, 0x1f, 0),
-				   PMBASE) & 0xff80;
-
-	printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
-
-	smi_en = inl(pmbase + SMI_EN);
-	if (smi_en & APMC_EN) {
-		printk(BIOS_INFO, "SMI# handler already enabled?\n");
-		return;
-	}
-
-	printk(BIOS_DEBUG, "\n");
-	dump_smi_status(reset_smi_status());
-	dump_pm1_status(reset_pm1_status());
-	dump_gpe0_status(reset_gpe0_status());
-	dump_alt_gp_smi_status(reset_alt_gp_smi_status());
-	dump_tco_status(reset_tco_status());
-
-	/* Disable GPE0 PME_B0 */
-	gpe0_en = inl(pmbase + GPE0_EN);
-	gpe0_en &= ~PME_B0_EN;
-	outl(gpe0_en, pmbase + GPE0_EN);
-
-	pm1_en = 0;
-	pm1_en |= PWRBTN_EN;
-	pm1_en |= GBL_EN;
-	outw(pm1_en, pmbase + PM1_EN);
-
-	/* Enable SMI generation:
-	 *  - on TCO events
-	 *  - on APMC writes (io 0xb2)
-	 *  - on writes to SLP_EN (sleep states)
-	 *  - on writes to GBL_RLS (bios commands)
-	 * No SMIs:
-	 *  - on microcontroller writes (io 0x62/0x66)
-	 */
-
-	smi_en = 0; /* reset SMI enables */
-
-#if 0
-	smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN;
-#endif
-	smi_en |= TCO_EN;
-	smi_en |= APMC_EN;
-#if DEBUG_PERIODIC_SMIS
-	/* Set DEBUG_PERIODIC_SMIS in pch.h to debug using
-	 * periodic SMIs.
-	 */
-	smi_en |= PERIODIC_EN;
-#endif
-	smi_en |= SLP_SMI_EN;
-#if 0
-	smi_en |= BIOS_EN;
-#endif
-
-	/* The following need to be on for SMIs to happen */
-	smi_en |= EOS | GBL_SMI_EN;
-
-	outl(smi_en, pmbase + SMI_EN);
-}
-
-void southbridge_trigger_smi(void)
-{
-	/**
-	 * There are several methods of raising a controlled SMI# via
-	 * software, among them:
-	 *  - Writes to io 0xb2 (APMC)
-	 *  - Writes to the Local Apic ICR with Delivery mode SMI.
-	 *
-	 * Using the local apic is a bit more tricky. According to
-	 * AMD Family 11 Processor BKDG no destination shorthand must be
-	 * used.
-	 * The whole SMM initialization is quite a bit hardware specific, so
-	 * I'm not too worried about the better of the methods at the moment
-	 */
-
-	/* raise an SMI interrupt */
-	printk(BIOS_SPEW, "  ... raise SMI#\n");
-	outb(0x00, 0xb2);
-}
-
-void southbridge_clear_smi_status(void)
-{
-	/* Clear SMI status */
-	reset_smi_status();
-
-	/* Clear PM1 status */
-	reset_pm1_status();
-
-	/* Set EOS bit so other SMIs can occur. */
-	smi_set_eos();
-}
-
-void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
-{
-	/*
-	 * Issue SMI to set the gnvs pointer in SMM.
-	 * tcg and smi1 are unused.
-	 *
-	 * EAX = APM_CNT_GNVS_UPDATE
-	 * EBX = gnvs pointer
-	 * EDX = APM_CNT
-	 */
-	asm volatile (
-		"outb %%al, %%dx\n\t"
-		: /* ignore result */
-		: "a" (APM_CNT_GNVS_UPDATE),
-		  "b" ((u32)gnvs),
-		  "d" (APM_CNT)
-	);
-}
diff --git a/src/southbridge/intel/ibexpeak/smihandler.c b/src/southbridge/intel/ibexpeak/smihandler.c
index fabe1c41ba..dbc412c072 100644
--- a/src/southbridge/intel/ibexpeak/smihandler.c
+++ b/src/southbridge/intel/ibexpeak/smihandler.c
@@ -35,13 +35,7 @@
  */
 #include <northbridge/intel/nehalem/nehalem.h>
 #include <southbridge/intel/common/gpio.h>
-
-/* While we read PMBASE dynamically in case it changed, let's
- * initialize it with a sane value
- */
-static u16 pmbase = DEFAULT_PMBASE;
-
-static u8 smm_initialized = 0;
+#include <southbridge/intel/common/pmutil.h>
 
 /* GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located
  * by coreboot.
@@ -52,193 +46,6 @@ global_nvs_t *smm_get_gnvs(void)
 	return gnvs;
 }
 
-static void alt_gpi_mask(u16 clr, u16 set)
-{
-	u16 alt_gp = inw(pmbase + ALT_GP_SMI_EN);
-	alt_gp &= ~clr;
-	alt_gp |= set;
-	outw(alt_gp, pmbase + ALT_GP_SMI_EN);
-}
-
-static void gpe0_mask(u32 clr, u32 set)
-{
-	u32 gpe0 = inl(pmbase + GPE0_EN);
-	gpe0 &= ~clr;
-	gpe0 |= set;
-	outl(gpe0, pmbase + GPE0_EN);
-}
-
-void gpi_route_interrupt(u8 gpi, u8 mode)
-{
-	u32 gpi_rout;
-	if (gpi >= 16)
-		return;
-
-	alt_gpi_mask(1 << gpi, 0);
-	gpe0_mask(1 << (gpi+16), 0);
-
-	gpi_rout = pci_read_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT);
-	gpi_rout &= ~(3 << (2 * gpi));
-	gpi_rout |= ((mode & 3) << (2 * gpi));
-	pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIO_ROUT, gpi_rout);
-
-	if (mode == GPI_IS_SCI)
-		gpe0_mask(0, 1 << (gpi+16));
-	else if (mode == GPI_IS_SMI)
-		alt_gpi_mask(0, 1 << gpi);
-}
-
-/**
- * @brief read and clear PM1_STS
- * @return PM1_STS register
- */
-static u16 reset_pm1_status(void)
-{
-	u16 reg16;
-
-	reg16 = inw(pmbase + PM1_STS);
-	/* set status bits are cleared by writing 1 to them */
-	outw(reg16, pmbase + PM1_STS);
-
-	return reg16;
-}
-
-static void dump_pm1_status(u16 pm1_sts)
-{
-	printk(BIOS_SPEW, "PM1_STS: ");
-	if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK ");
-	if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK ");
-	if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR ");
-	if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC ");
-	if (pm1_sts & (1 <<  8)) printk(BIOS_SPEW, "PWRBTN ");
-	if (pm1_sts & (1 <<  5)) printk(BIOS_SPEW, "GBL ");
-	if (pm1_sts & (1 <<  4)) printk(BIOS_SPEW, "BM ");
-	if (pm1_sts & (1 <<  0)) printk(BIOS_SPEW, "TMROF ");
-	printk(BIOS_SPEW, "\n");
-	int reg16 = inw(pmbase + PM1_EN);
-	printk(BIOS_SPEW, "PM1_EN: %x\n", reg16);
-}
-
-/**
- * @brief read and clear SMI_STS
- * @return SMI_STS register
- */
-static u32 reset_smi_status(void)
-{
-	u32 reg32;
-
-	reg32 = inl(pmbase + SMI_STS);
-	/* set status bits are cleared by writing 1 to them */
-	outl(reg32, pmbase + SMI_STS);
-
-	return reg32;
-}
-
-static void dump_smi_status(u32 smi_sts)
-{
-	printk(BIOS_DEBUG, "SMI_STS: ");
-	if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
-	if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
-	if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
-	if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
-	if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
-	if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
-	if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
-	if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
-	if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
-	if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
-	if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
-	if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
-	if (smi_sts & (1 <<  9)) printk(BIOS_DEBUG, "GPE0 ");
-	if (smi_sts & (1 <<  8)) printk(BIOS_DEBUG, "PM1 ");
-	if (smi_sts & (1 <<  6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
-	if (smi_sts & (1 <<  5)) printk(BIOS_DEBUG, "APM ");
-	if (smi_sts & (1 <<  4)) printk(BIOS_DEBUG, "SLP_SMI ");
-	if (smi_sts & (1 <<  3)) printk(BIOS_DEBUG, "LEGACY_USB ");
-	if (smi_sts & (1 <<  2)) printk(BIOS_DEBUG, "BIOS ");
-	printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear GPE0_STS
- * @return GPE0_STS register
- */
-static u32 reset_gpe0_status(void)
-{
-	u32 reg32;
-
-	reg32 = inl(pmbase + GPE0_STS);
-	/* set status bits are cleared by writing 1 to them */
-	outl(reg32, pmbase + GPE0_STS);
-
-	return reg32;
-}
-
-static void dump_gpe0_status(u32 gpe0_sts)
-{
-	int i;
-	printk(BIOS_DEBUG, "GPE0_STS: ");
-	for (i=31; i>= 16; i--) {
-		if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
-	}
-	if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
-	if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
-	if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
-	if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
-	if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "BATLOW ");
-	if (gpe0_sts & (1 <<  9)) printk(BIOS_DEBUG, "PCI_EXP ");
-	if (gpe0_sts & (1 <<  8)) printk(BIOS_DEBUG, "RI ");
-	if (gpe0_sts & (1 <<  7)) printk(BIOS_DEBUG, "SMB_WAK ");
-	if (gpe0_sts & (1 <<  6)) printk(BIOS_DEBUG, "TCO_SCI ");
-	if (gpe0_sts & (1 <<  5)) printk(BIOS_DEBUG, "AC97 ");
-	if (gpe0_sts & (1 <<  4)) printk(BIOS_DEBUG, "USB2 ");
-	if (gpe0_sts & (1 <<  3)) printk(BIOS_DEBUG, "USB1 ");
-	if (gpe0_sts & (1 <<  2)) printk(BIOS_DEBUG, "SWGPE ");
-	if (gpe0_sts & (1 <<  1)) printk(BIOS_DEBUG, "HOTPLUG ");
-	if (gpe0_sts & (1 <<  0)) printk(BIOS_DEBUG, "THRM ");
-	printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear TCOx_STS
- * @return TCOx_STS registers
- */
-static u32 reset_tco_status(void)
-{
-	u32 tcobase = pmbase + 0x60;
-	u32 reg32;
-
-	reg32 = inl(tcobase + 0x04);
-	/* set status bits are cleared by writing 1 to them */
-	outl(reg32 & ~(1 << 18), tcobase + 0x04); //  Don't clear BOOT_STS before SECOND_TO_STS
-	if (reg32 & (1 << 18))
-		outl(reg32 & (1 << 18), tcobase + 0x04); // clear BOOT_STS
-
-	return reg32;
-}
-
-
-static void dump_tco_status(u32 tco_sts)
-{
-	printk(BIOS_DEBUG, "TCO_STS: ");
-	if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
-	if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
-	if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
-	if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
-	if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
-	if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
-	if (tco_sts & (1 <<  9)) printk(BIOS_DEBUG, "DMISCI ");
-	if (tco_sts & (1 <<  8)) printk(BIOS_DEBUG, "BIOSWR ");
-	if (tco_sts & (1 <<  7)) printk(BIOS_DEBUG, "NEWCENTURY ");
-	if (tco_sts & (1 <<  3)) printk(BIOS_DEBUG, "TIMEOUT ");
-	if (tco_sts & (1 <<  2)) printk(BIOS_DEBUG, "TCO_INT ");
-	if (tco_sts & (1 <<  1)) printk(BIOS_DEBUG, "SW_TCO ");
-	if (tco_sts & (1 <<  0)) printk(BIOS_DEBUG, "NMI2SMI ");
-	printk(BIOS_DEBUG, "\n");
-}
-
 int southbridge_io_trap_handler(int smif)
 {
 	switch (smif) {
@@ -256,53 +63,6 @@ int southbridge_io_trap_handler(int smif)
 	return 0;
 }
 
-/**
- * @brief Set the EOS bit
- */
-void southbridge_smi_set_eos(void)
-{
-	u8 reg8;
-
-	reg8 = inb(pmbase + SMI_EN);
-	reg8 |= EOS;
-	outb(reg8, pmbase + SMI_EN);
-}
-
-static void busmaster_disable_on_bus(int bus)
-{
-	int slot, func;
-	unsigned int val;
-	unsigned char hdr;
-
-	for (slot = 0; slot < 0x20; slot++) {
-		for (func = 0; func < 8; func++) {
-			u32 reg32;
-			pci_devfn_t dev = PCI_DEV(bus, slot, func);
-
-			val = pci_read_config32(dev, PCI_VENDOR_ID);
-
-			if (val == 0xffffffff || val == 0x00000000 ||
-			    val == 0x0000ffff || val == 0xffff0000)
-				continue;
-
-			/* Disable Bus Mastering for this one device */
-			reg32 = pci_read_config32(dev, PCI_COMMAND);
-			reg32 &= ~PCI_COMMAND_MASTER;
-			pci_write_config32(dev, PCI_COMMAND, reg32);
-
-			/* If this is a bridge, then follow it. */
-			hdr = pci_read_config8(dev, PCI_HEADER_TYPE);
-			hdr &= 0x7f;
-			if (hdr == PCI_HEADER_TYPE_BRIDGE ||
-			    hdr == PCI_HEADER_TYPE_CARDBUS) {
-				unsigned int buses;
-				buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
-				busmaster_disable_on_bus((buses >> 8) & 0xff);
-			}
-		}
-	}
-}
-
 static void southbridge_gate_memory_reset_real(int offset,
 					       u16 use, u16 io, u16 lvl)
 {
@@ -334,7 +94,7 @@ static void southbridge_gate_memory_reset_real(int offset,
  * Intel reference designs all use GPIO 60 but it is
  * not a requirement and boards could use a different pin.
  */
-static void southbridge_gate_memory_reset(void)
+void southbridge_gate_memory_reset(void)
 {
 	u16 gpiobase;
 
@@ -354,377 +114,7 @@ static void southbridge_gate_memory_reset(void)
 						   gpiobase + GP_LVL);
 }
 
-static void xhci_sleep(u8 slp_typ)
-{
-	u32 reg32, xhci_bar;
-	u16 reg16;
-
-	switch (slp_typ) {
-	case ACPI_S3:
-	case ACPI_S4:
-		reg16 = pci_read_config16(PCH_XHCI_DEV, 0x74);
-		reg16 &= ~0x03UL;
-		pci_write_config32(PCH_XHCI_DEV, 0x74, reg16);
-
-		reg32 = pci_read_config32(PCH_XHCI_DEV, PCI_COMMAND);
-		reg32 |= (PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-		pci_write_config32(PCH_XHCI_DEV, PCI_COMMAND, reg32);
-
-		xhci_bar = pci_read_config32(PCH_XHCI_DEV,
-				              PCI_BASE_ADDRESS_0) & ~0xFUL;
-
-		if ((xhci_bar + 0x4C0) & 1)
-			pch_iobp_update(0xEC000082, ~0UL, (3 << 2));
-		if ((xhci_bar + 0x4D0) & 1)
-			pch_iobp_update(0xEC000182, ~0UL, (3 << 2));
-		if ((xhci_bar + 0x4E0) & 1)
-			pch_iobp_update(0xEC000282, ~0UL, (3 << 2));
-		if ((xhci_bar + 0x4F0) & 1)
-			pch_iobp_update(0xEC000382, ~0UL, (3 << 2));
-
-		reg32 = pci_read_config32(PCH_XHCI_DEV, PCI_COMMAND);
-		reg32 &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-		pci_write_config32(PCH_XHCI_DEV, PCI_COMMAND, reg32);
-
-		reg16 = pci_read_config16(PCH_XHCI_DEV, 0x74);
-		reg16 |= 0x03;
-		pci_write_config16(PCH_XHCI_DEV, 0x74, reg16);
-		break;
-
-	case ACPI_S5:
-		reg16 = pci_read_config16(PCH_XHCI_DEV, 0x74);
-		reg16 |= ((1 << 8) | 0x03);
-		pci_write_config16(PCH_XHCI_DEV, 0x74, reg16);
-		break;
-	}
-}
-
-static void southbridge_smi_sleep(void)
-{
-	u8 reg8;
-	u32 reg32;
-	u8 slp_typ;
-	u8 s5pwr = CONFIG_MAINBOARD_POWER_FAILURE_STATE;
-
-	// save and recover RTC port values
-	u8 tmp70, tmp72;
-	tmp70 = inb(0x70);
-	tmp72 = inb(0x72);
-	get_option(&s5pwr, "power_on_after_fail");
-	outb(tmp70, 0x70);
-	outb(tmp72, 0x72);
-
-	/* First, disable further SMIs */
-	reg8 = inb(pmbase + SMI_EN);
-	reg8 &= ~SLP_SMI_EN;
-	outb(reg8, pmbase + SMI_EN);
-
-	/* Figure out SLP_TYP */
-	reg32 = inl(pmbase + PM1_CNT);
-	printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32);
-	slp_typ = acpi_sleep_from_pm1(reg32);
-
-	if (smm_get_gnvs()->xhci)
-		xhci_sleep(slp_typ);
-
-	/* Do any mainboard sleep handling */
-	mainboard_smi_sleep(slp_typ);
-
-#if CONFIG(ELOG_GSMI)
-	/* Log S3, S4, and S5 entry */
-	if (slp_typ >= ACPI_S3)
-		elog_add_event_byte(ELOG_TYPE_ACPI_ENTER, slp_typ);
-#endif
-
-	/* Next, do the deed.
-	 */
-
-	switch (slp_typ) {
-	case ACPI_S0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break;
-	case ACPI_S1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break;
-	case ACPI_S3:
-		printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n");
-
-		/* Gate memory reset */
-		southbridge_gate_memory_reset();
-
-		/* Invalidate the cache before going to S3 */
-		wbinvd();
-		break;
-	case ACPI_S4: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break;
-	case ACPI_S5:
-		printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
-
-		outl(0, pmbase + GPE0_EN);
-
-		/* Always set the flag in case CMOS was changed on runtime. For
-		 * "KEEP", switch to "OFF" - KEEP is software emulated
-		 */
-		reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3);
-		if (s5pwr == MAINBOARD_POWER_ON) {
-			reg8 &= ~1;
-		} else {
-			reg8 |= 1;
-		}
-		pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8);
-
-		/* also iterates over all bridges on bus 0 */
-		busmaster_disable_on_bus(0);
-		break;
-	default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break;
-	}
-
-	/* Write back to the SLP register to cause the originally intended
-	 * event again. We need to set BIT13 (SLP_EN) though to make the
-	 * sleep happen.
-	 */
-	outl(reg32 | SLP_EN, pmbase + PM1_CNT);
-
-	/* Make sure to stop executing code here for S3/S4/S5 */
-	if (slp_typ >= ACPI_S3)
-		halt();
-
-	/* In most sleep states, the code flow of this function ends at
-	 * the line above. However, if we entered sleep state S1 and wake
-	 * up again, we will continue to execute code in this function.
-	 */
-	reg32 = inl(pmbase + PM1_CNT);
-	if (reg32 & SCI_EN) {
-		/* The OS is not an ACPI OS, so we set the state to S0 */
-		reg32 &= ~(SLP_EN | SLP_TYP);
-		outl(reg32, pmbase + PM1_CNT);
-	}
-}
-
-/*
- * Look for Synchronous IO SMI and use save state from that
- * core in case we are not running on the same core that
- * initiated the IO transaction.
- */
-static em64t101_smm_state_save_area_t *smi_apmc_find_state_save(u8 cmd)
-{
-	em64t101_smm_state_save_area_t *state;
-	int node;
-
-	/* Check all nodes looking for the one that issued the IO */
-	for (node = 0; node < CONFIG_MAX_CPUS; node++) {
-		state = smm_get_save_state(node);
-
-		/* Check for Synchronous IO (bit0 == 1) */
-		if (!(state->io_misc_info & (1 << 0)))
-			continue;
-
-		/* Make sure it was a write (bit4 == 0) */
-		if (state->io_misc_info & (1 << 4))
-			continue;
-
-		/* Check for APMC IO port */
-		if (((state->io_misc_info >> 16) & 0xff) != APM_CNT)
-			continue;
-
-		/* Check AX against the requested command */
-		if ((state->rax & 0xff) != cmd)
-			continue;
-
-		return state;
-	}
-
-	return NULL;
-}
-
-#if CONFIG(ELOG_GSMI)
-static void southbridge_smi_gsmi(void)
-{
-	u32 *ret, *param;
-	u8 sub_command;
-	em64t101_smm_state_save_area_t *io_smi =
-		smi_apmc_find_state_save(APM_CNT_ELOG_GSMI);
-
-	if (!io_smi)
-		return;
-
-	/* Command and return value in EAX */
-	ret = (u32*)&io_smi->rax;
-	sub_command = (u8)(*ret >> 8);
-
-	/* Parameter buffer in EBX */
-	param = (u32*)&io_smi->rbx;
-
-	/* drivers/elog/gsmi.c */
-	*ret = gsmi_exec(sub_command, param);
-}
-#endif
-
-static void southbridge_smi_apmc(void)
-{
-	u32 pmctrl;
-	u8 reg8;
-	em64t101_smm_state_save_area_t *state;
-
-	/* Emulate B2 register as the FADT / Linux expects it */
-
-	reg8 = inb(APM_CNT);
-	switch (reg8) {
-	case APM_CNT_CST_CONTROL:
-		/* Calling this function seems to cause
-		 * some kind of race condition in Linux
-		 * and causes a kernel oops
-		 */
-		printk(BIOS_DEBUG, "C-state control\n");
-		break;
-	case APM_CNT_PST_CONTROL:
-		/* Calling this function seems to cause
-		 * some kind of race condition in Linux
-		 * and causes a kernel oops
-		 */
-		printk(BIOS_DEBUG, "P-state control\n");
-		break;
-	case APM_CNT_ACPI_DISABLE:
-		pmctrl = inl(pmbase + PM1_CNT);
-		pmctrl &= ~SCI_EN;
-		outl(pmctrl, pmbase + PM1_CNT);
-		printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
-		break;
-	case APM_CNT_ACPI_ENABLE:
-		pmctrl = inl(pmbase + PM1_CNT);
-		pmctrl |= SCI_EN;
-		outl(pmctrl, pmbase + PM1_CNT);
-		printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
-		break;
-	case APM_CNT_GNVS_UPDATE:
-		if (smm_initialized) {
-			printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n");
-			return;
-		}
-		state = smi_apmc_find_state_save(reg8);
-		if (state) {
-			/* EBX in the state save contains the GNVS pointer */
-			gnvs = (global_nvs_t *)((u32)state->rbx);
-			smm_initialized = 1;
-			printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs);
-		}
-		break;
-#if CONFIG(ELOG_GSMI)
-	case APM_CNT_ELOG_GSMI:
-		southbridge_smi_gsmi();
-		break;
-#endif
-	}
-
-	mainboard_smi_apmc(reg8);
-}
-
-static void southbridge_smi_pm1(void)
-{
-	u16 pm1_sts;
-
-	pm1_sts = reset_pm1_status();
-	dump_pm1_status(pm1_sts);
-
-	/* While OSPM is not active, poweroff immediately
-	 * on a power button event.
-	 */
-	if (pm1_sts & PWRBTN_STS) {
-		// power button pressed
-		u32 reg32;
-		reg32 = (7 << 10) | (1 << 13);
-#if CONFIG(ELOG_GSMI)
-		elog_add_event(ELOG_TYPE_POWER_BUTTON);
-#endif
-		outl(reg32, pmbase + PM1_CNT);
-	}
-}
-
-static void southbridge_smi_gpe0(void)
-{
-	u32 gpe0_sts;
-
-	gpe0_sts = reset_gpe0_status();
-	dump_gpe0_status(gpe0_sts);
-}
-
-static void southbridge_smi_gpi(void)
-{
-	u16 reg16;
-	reg16 = inw(pmbase + ALT_GP_SMI_STS);
-	outw(reg16, pmbase + ALT_GP_SMI_STS);
-
-	reg16 &= inw(pmbase + ALT_GP_SMI_EN);
-
-	mainboard_smi_gpi(reg16);
-
-	if (reg16)
-		printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16);
-
-	outw(reg16, pmbase + ALT_GP_SMI_STS);
-}
-
-static void southbridge_smi_mc(void)
-{
-	u32 reg32;
-
-	reg32 = inl(pmbase + SMI_EN);
-
-	/* Are periodic SMIs enabled? */
-	if ((reg32 & MCSMI_EN) == 0)
-		return;
-
-	printk(BIOS_DEBUG, "Microcontroller SMI.\n");
-}
-
-
-
-static void southbridge_smi_tco(void)
-{
-	u32 tco_sts;
-
-	tco_sts = reset_tco_status();
-
-	/* Any TCO event? */
-	if (!tco_sts)
-		return;
-
-	if (tco_sts & (1 << 8)) { // BIOSWR
-		u8 bios_cntl;
-
-		bios_cntl = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc);
-
-		if (bios_cntl & 1) {
-			/* BWE is RW, so the SMI was caused by a
-			 * write to BWE, not by a write to the BIOS
-			 */
-
-			/* This is the place where we notice someone
-			 * is trying to tinker with the BIOS. We are
-			 * trying to be nice and just ignore it. A more
-			 * resolute answer would be to power down the
-			 * box.
-			 */
-			printk(BIOS_DEBUG, "Switching back to RO\n");
-			pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
-		} /* No else for now? */
-	} else if (tco_sts & (1 << 3)) { /* TIMEOUT */
-		/* Handle TCO timeout */
-		printk(BIOS_DEBUG, "TCO Timeout.\n");
-	} else {
-		dump_tco_status(tco_sts);
-	}
-}
-
-static void southbridge_smi_periodic(void)
-{
-	u32 reg32;
-
-	reg32 = inl(pmbase + SMI_EN);
-
-	/* Are periodic SMIs enabled? */
-	if ((reg32 & PERIODIC_EN) == 0)
-		return;
-
-	printk(BIOS_DEBUG, "Periodic SMI.\n");
-}
-
-static void southbridge_smi_monitor(void)
+void southbridge_smi_monitor(void)
 {
 #define IOTRAP(x) (trap_sts & (1 << x))
 	u32 trap_sts, trap_cycle;
@@ -778,76 +168,18 @@ static void southbridge_smi_monitor(void)
 #undef IOTRAP
 }
 
-typedef void (*smi_handler_t)(void);
-
-static smi_handler_t southbridge_smi[32] = {
-	NULL,			  //  [0] reserved
-	NULL,			  //  [1] reserved
-	NULL,			  //  [2] BIOS_STS
-	NULL,			  //  [3] LEGACY_USB_STS
-	southbridge_smi_sleep,	  //  [4] SLP_SMI_STS
-	southbridge_smi_apmc,	  //  [5] APM_STS
-	NULL,			  //  [6] SWSMI_TMR_STS
-	NULL,			  //  [7] reserved
-	southbridge_smi_pm1,	  //  [8] PM1_STS
-	southbridge_smi_gpe0,	  //  [9] GPE0_STS
-	southbridge_smi_gpi,	  // [10] GPI_STS
-	southbridge_smi_mc,	  // [11] MCSMI_STS
-	NULL,			  // [12] DEVMON_STS
-	southbridge_smi_tco,	  // [13] TCO_STS
-	southbridge_smi_periodic, // [14] PERIODIC_STS
-	NULL,			  // [15] SERIRQ_SMI_STS
-	NULL,			  // [16] SMBUS_SMI_STS
-	NULL,			  // [17] LEGACY_USB2_STS
-	NULL,			  // [18] INTEL_USB2_STS
-	NULL,			  // [19] reserved
-	NULL,			  // [20] PCI_EXP_SMI_STS
-	southbridge_smi_monitor,  // [21] MONITOR_STS
-	NULL,			  // [22] reserved
-	NULL,			  // [23] reserved
-	NULL,			  // [24] reserved
-	NULL,			  // [25] EL_SMI_STS
-	NULL,			  // [26] SPI_STS
-	NULL,			  // [27] reserved
-	NULL,			  // [28] reserved
-	NULL,			  // [29] reserved
-	NULL,			  // [30] reserved
-	NULL			  // [31] reserved
-};
-
-/**
- * @brief Interrupt handler for SMI#
- * @param node
- * @param state_save
- */
-void southbridge_smi_handler(void)
+void southbridge_update_gnvs(u8 apm_cnt, int *smm_done)
 {
-	int i, dump = 0;
-	u32 smi_sts;
-
-	/* Update global variable pmbase */
-	pmbase = lpc_get_pmbase();
-
-	/* We need to clear the SMI status registers, or we won't see what's
-	 * happening in the following calls.
-	 */
-	smi_sts = reset_smi_status();
-
-	/* Call SMI sub handler for each of the status bits */
-	for (i = 0; i < 31; i++) {
-		if (smi_sts & (1 << i)) {
-			if (southbridge_smi[i]) {
-				southbridge_smi[i]();
-			} else {
-				printk(BIOS_DEBUG, "SMI_STS[%d] occurred, but no "
-						"handler available.\n", i);
-				dump = 1;
-			}
-		}
-	}
-
-	if (dump) {
-		dump_smi_status(smi_sts);
+	em64t101_smm_state_save_area_t *state =
+		smi_apmc_find_state_save(apm_cnt);
+	if (state) {
+		/* EBX in the state save contains the GNVS pointer */
+		gnvs = (global_nvs_t *)((u32)state->rbx);
+		*smm_done = 1;
+		printk(BIOS_DEBUG, "SMI#: Setting GNVS to %p\n", gnvs);
 	}
+}
 
+void southbridge_finalize_all(void)
+{
 }