K8 RAM init debug messages are pretty short and sometimes cryptic. Make

them a bit more verbose and hopefully more understandable.

Old messages for my machine with 5 GB:
RAM: 0x00400000 kB
Ram3
[...]
Initializing memory:  done
RAM: 0x00500000 kB

New messages:
RAM end at 0x00400000 kB
Adjusting lower RAM end
Lower RAM end at 0x003f0000 kB
Ram3
[...]
Initializing memory:  done
Handling memory hole at 0x00300000 (default)
RAM end at 0x00500000 kB
Handling memory mapped above 4 GB
Upper RAM end at 0x00500000 kB
Correcting memory amount mapped below 4 GB
Adjusting lower RAM end
Lower RAM end at 0x00300000 kB

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

2 files changed, 16 insertions, 2 deletions

diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c
index 0c3cbdb3d3..690a4a0a7c 100644
--- a/src/northbridge/amd/amdk8/raminit.c
+++ b/src/northbridge/amd/amdk8/raminit.c
@@ -850,14 +850,17 @@ static void set_top_mem(unsigned tom_k, unsigned hole_startk)
 	}
 
 	/* Report the amount of memory. */
-	printk_spew("RAM: 0x%08x kB\n", tom_k);
+	printk_debug("RAM end at 0x%08x kB\n", tom_k);
 
 	/* Now set top of memory */
 	msr_t msr;
 	if (tom_k > (4*1024*1024)) {
+		printk_raminit("Handling memory mapped above 4 GB\n");
+		printk_raminit("Upper RAM end at 0x%08x kB\n", tom_k);
 		msr.lo = (tom_k & 0x003fffff) << 10;
 		msr.hi = (tom_k & 0xffc00000) >> 22;
 		wrmsr(TOP_MEM2, msr);
+		printk_raminit("Correcting memory amount mapped below 4 GB\n");
 	}
 
 	/* Leave a 64M hole between TOP_MEM and TOP_MEM2
@@ -870,7 +873,9 @@ static void set_top_mem(unsigned tom_k, unsigned hole_startk)
 		} else
 #endif
 		tom_k = 0x3f0000;
+		printk_raminit("Adjusting lower RAM end\n");
 	}
+	printk_raminit("Lower RAM end at 0x%08x kB\n", tom_k);
 	msr.lo = (tom_k & 0x003fffff) << 10;
 	msr.hi = (tom_k & 0xffc00000) >> 22;
 	wrmsr(TOP_MEM, msr);
@@ -2167,6 +2172,7 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl)
 
 	hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK;
 
+	printk_raminit("Handling memory hole at 0x%08x (default)\n", hole_startk);
 #if HW_MEM_HOLE_SIZE_AUTO_INC == 1
 	/* We need to double check if hole_startk is valid.
 	 * If it is equal to the dram base address in K (base_k),
@@ -2191,6 +2197,7 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl)
 			basek_pri = base_k;
 	}
 
+	printk_raminit("Handling memory hole at 0x%08x (adjusted)\n", hole_startk);
 #endif
 	/* Find node number that needs the memory hole configured */
 	for (i=0; i<controllers; i++) {
diff --git a/src/northbridge/amd/amdk8/raminit_f.c b/src/northbridge/amd/amdk8/raminit_f.c
index 902069c53a..37398a8d23 100644
--- a/src/northbridge/amd/amdk8/raminit_f.c
+++ b/src/northbridge/amd/amdk8/raminit_f.c
@@ -1049,14 +1049,17 @@ static void set_top_mem(unsigned tom_k, unsigned hole_startk)
 	}
 
 	/* Report the amount of memory. */
-	printk_debug("RAM: 0x%08x kB\n", tom_k);
+	printk_debug("RAM end at 0x%08x kB\n", tom_k);
 
 	/* Now set top of memory */
 	msr_t msr;
 	if (tom_k > (4*1024*1024)) {
+		printk_raminit("Handling memory mapped above 4 GB\n");
+		printk_raminit("Upper RAM end at 0x%08x kB\n", tom_k);
 		msr.lo = (tom_k & 0x003fffff) << 10;
 		msr.hi = (tom_k & 0xffc00000) >> 22;
 		wrmsr(TOP_MEM2, msr);
+		printk_raminit("Correcting memory amount mapped below 4 GB\n");
 	}
 
 	/* Leave a 64M hole between TOP_MEM and TOP_MEM2
@@ -1069,7 +1072,9 @@ static void set_top_mem(unsigned tom_k, unsigned hole_startk)
 		} else
 #endif
 		tom_k = 0x3f0000;
+		printk_raminit("Adjusting lower RAM end\n");
 	}
+	printk_raminit("Lower RAM end at 0x%08x kB\n", tom_k);
 	msr.lo = (tom_k & 0x003fffff) << 10;
 	msr.hi = (tom_k & 0xffc00000) >> 22;
 	wrmsr(TOP_MEM, msr);
@@ -2938,6 +2943,7 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl)
 
 	hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK;
 
+	printk_raminit("Handling memory hole at 0x%08x (default)\n", hole_startk);
 #if HW_MEM_HOLE_SIZE_AUTO_INC == 1
 	/* We need to double check if the hole_startk is valid, if it is equal
 	   to basek, we need to decrease it some */
@@ -2958,6 +2964,7 @@ static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl)
 			}
 			basek_pri = base_k;
 	}
+	printk_raminit("Handling memory hole at 0x%08x (adjusted)\n", hole_startk);
 #endif
 	/* find node index that need do set hole */
 	for (i=0; i < controllers; i++) {