diff options
| author | Martin Roth <martin@coreboot.org> | 2021-10-01 14:53:22 -0600 |
|---|---|---|
| committer | Martin Roth <martinroth@google.com> | 2021-10-05 18:07:08 +0000 |
| commit | 26f97f9532933da3c1d72a7918c8a24457bbc1c0 (patch) | |
| tree | 8c25279e58ef541fae197ec193f5642a9b21b2d4 /src | |
| parent | 50863daef8ed75c0cb3dfd375e7622c898de5821 (diff) | |
src/soc to src/superio: Fix spelling errors
These issues were found and fixed by codespell, a useful tool for
finding spelling errors.
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Ieafbc93e49fcef198ac6e31fc8a3b708c395e08e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58082
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src')
75 files changed, 91 insertions, 91 deletions
diff --git a/src/soc/amd/cezanne/fch.c b/src/soc/amd/cezanne/fch.c index 80ce9466ec..ac79cc9e11 100644 --- a/src/soc/amd/cezanne/fch.c +++ b/src/soc/amd/cezanne/fch.c @@ -127,7 +127,7 @@ static void fch_init_resets(void) pm_write16(PWR_RESET_CFG, pm_read16(PWR_RESET_CFG) | TOGGLE_ALL_PWR_GOOD); } -/* configure the genral purpose PCIe clock outputs according to the devicetree settings */ +/* configure the general purpose PCIe clock outputs according to the devicetree settings */ static void gpp_clk_setup(void) { const struct soc_amd_cezanne_config *cfg = config_of_soc(); diff --git a/src/soc/amd/picasso/acpi/sb_pci0_fch.asl b/src/soc/amd/picasso/acpi/sb_pci0_fch.asl index e948bca903..292cdd8318 100644 --- a/src/soc/amd/picasso/acpi/sb_pci0_fch.asl +++ b/src/soc/amd/picasso/acpi/sb_pci0_fch.asl @@ -29,7 +29,7 @@ Name(CRES, ResourceTemplate() { * The Secondary bus range for PCI0 lets the system * know what bus values are allowed on the downstream * side of this PCI bus if there is a PCI-PCI bridge. - * PCI busses can have 256 secondary busses which + * PCI buses can have 256 secondary buses which * range from [0-0xFF] but they do not need to be * sequential. */ diff --git a/src/soc/amd/picasso/chip.h b/src/soc/amd/picasso/chip.h index 63898308e7..4fcd3f71a3 100644 --- a/src/soc/amd/picasso/chip.h +++ b/src/soc/amd/picasso/chip.h @@ -22,7 +22,7 @@ struct __packed usb2_phy_tune { uint8_t sq_rx_tune; /* FS/LS Source Impedance Adjustment. Range 0 - 0xF */ uint8_t tx_fsls_tune; - /* HS Transmitter Pre-Emphasis Curent Control. Range 0 - 0x3 */ + /* HS Transmitter Pre-Emphasis Current Control. Range 0 - 0x3 */ uint8_t tx_pre_emp_amp_tune; /* HS Transmitter Pre-Emphasis Duration Control. Range: 0 - 0x1 */ uint8_t tx_pre_emp_pulse_tune; @@ -99,7 +99,7 @@ struct soc_amd_picasso_config { * If sb_reset_i2c_peripherals() is called, this devicetree register * defines which I2C SCL will be toggled 9 times at 100 KHz. * For example, should we need I2C0 and I2C3 have their peripheral - * devices reseted by toggling SCL, use: + * devices reset by toggling SCL, use: * * register i2c_scl_reset = (GPIO_I2C0_SCL | GPIO_I2C3_SCL) */ diff --git a/src/soc/amd/picasso/fch.c b/src/soc/amd/picasso/fch.c index 711091c5c5..44acc817ef 100644 --- a/src/soc/amd/picasso/fch.c +++ b/src/soc/amd/picasso/fch.c @@ -175,7 +175,7 @@ static void al2ahb_clock_gate(void) write8((void *)(al2ahb_base + AL2AHB_CONTROL_HCLK_OFFSET), al2ahb_val); } -/* configure the genral purpose PCIe clock outputs according to the devicetree settings */ +/* configure the general purpose PCIe clock outputs according to the devicetree settings */ static void gpp_clk_setup(void) { const struct soc_amd_picasso_config *cfg = config_of_soc(); diff --git a/src/soc/amd/picasso/include/soc/platform_descriptors.h b/src/soc/amd/picasso/include/soc/platform_descriptors.h index 28062b689e..2ea35a940b 100644 --- a/src/soc/amd/picasso/include/soc/platform_descriptors.h +++ b/src/soc/amd/picasso/include/soc/platform_descriptors.h @@ -7,7 +7,7 @@ #include <platform_descriptors.h> #include <FspsUpd.h> -/* These tempory macros apply to emmc0_mode field in FSP_S_CONFIG. +/* These temporary macros apply to emmc0_mode field in FSP_S_CONFIG. * TODO: Remove when official definitions arrive. */ #define SD_DISABLE 0 #define SD_LOW_SPEED 1 diff --git a/src/soc/amd/stoneyridge/acpi/sb_pci0_fch.asl b/src/soc/amd/stoneyridge/acpi/sb_pci0_fch.asl index 78ce889e5d..f7ea782da9 100644 --- a/src/soc/amd/stoneyridge/acpi/sb_pci0_fch.asl +++ b/src/soc/amd/stoneyridge/acpi/sb_pci0_fch.asl @@ -56,7 +56,7 @@ Name(CRES, ResourceTemplate() { * The Secondary bus range for PCI0 lets the system * know what bus values are allowed on the downstream * side of this PCI bus if there is a PCI-PCI bridge. - * PCI busses can have 256 secondary busses which + * PCI buses can have 256 secondary buses which * range from [0-0xFF] but they do not need to be * sequential. */ diff --git a/src/soc/amd/stoneyridge/chip.h b/src/soc/amd/stoneyridge/chip.h index 82c54371c5..b870baeb88 100644 --- a/src/soc/amd/stoneyridge/chip.h +++ b/src/soc/amd/stoneyridge/chip.h @@ -46,7 +46,7 @@ struct soc_amd_stoneyridge_config { * If sb_reset_i2c_peripherals() is called, this devicetree register * defines which I2C SCL will be toggled 9 times at 100 KHz. * For example, should we need I2C0 and I2C3 have their peripheral - * devices reseted by toggling SCL, use: + * devices reset by toggling SCL, use: * * register i2c_scl_reset = (GPIO_I2C0_SCL | GPIO_I2C3_SCL) */ diff --git a/src/soc/amd/stoneyridge/northbridge.c b/src/soc/amd/stoneyridge/northbridge.c index d80aeb2a09..d5231ad5d5 100644 --- a/src/soc/amd/stoneyridge/northbridge.c +++ b/src/soc/amd/stoneyridge/northbridge.c @@ -400,19 +400,19 @@ void domain_read_resources(struct device *dev) reserved_ram_resource(dev, idx++, 0xc0000 / KiB, 0x40000 / KiB); /* - * 0x100000 (1MiB) -> low top useable RAM + * 0x100000 (1MiB) -> low top usable RAM * cbmem_top() accounts for low UMA and TSEG if they are used. */ ram_resource(dev, idx++, (1 * MiB) / KiB, (mem_useable - (1 * MiB)) / KiB); - /* Low top useable RAM -> Low top RAM (bottom pci mmio hole) */ + /* Low top usable RAM -> Low top RAM (bottom pci mmio hole) */ reserved_ram_resource(dev, idx++, mem_useable / KiB, (tom.lo - mem_useable) / KiB); /* If there is memory above 4GiB */ if (high_tom.hi) { - /* 4GiB -> high top useable */ + /* 4GiB -> high top usable */ if (uma_base >= (4ull * GiB)) high_mem_useable = uma_base; else @@ -422,7 +422,7 @@ void domain_read_resources(struct device *dev) ram_resource(dev, idx++, (4ull * GiB) / KiB, ((high_mem_useable - (4ull * GiB)) / KiB)); - /* High top useable RAM -> high top RAM */ + /* High top usable RAM -> high top RAM */ if (uma_base >= (4ull * GiB)) { reserved_ram_resource(dev, idx++, uma_base / KiB, uma_size / KiB); diff --git a/src/soc/cavium/cn81xx/bootblock_custom.S b/src/soc/cavium/cn81xx/bootblock_custom.S index 03d91da948..318c4d71b1 100644 --- a/src/soc/cavium/cn81xx/bootblock_custom.S +++ b/src/soc/cavium/cn81xx/bootblock_custom.S @@ -130,7 +130,7 @@ ENTRY(_setup_car) thunder1_cache_setup: /** * Setup L2 cache to allow secure access to all of the address space - * thunder1 compability list: + * thunder1 compatibility list: * - CN81XX * - CN83XX * - CN88XX diff --git a/src/soc/intel/alderlake/acpi/tcss.asl b/src/soc/intel/alderlake/acpi/tcss.asl index 82cbad63a8..81c2432f66 100644 --- a/src/soc/intel/alderlake/acpi/tcss.asl +++ b/src/soc/intel/alderlake/acpi/tcss.asl @@ -511,7 +511,7 @@ Scope (\_SB.PCI0) TACK, 1, /* [16:16] IOM Acknowledge bit */ DPOF, 1, /* [17:17] Set 1 to indicate IOM, all the */ /* display is OFF, clear otherwise */ - Offset(0x70), /* Pyhsical addr is offset 0x70. */ + Offset(0x70), /* Physical addr is offset 0x70. */ IMCD, 32, /* R_SA_IOM_BIOS_MAIL_BOX_CMD */ IMDA, 32 /* R_SA_IOM_BIOS_MAIL_BOX_DATA */ } diff --git a/src/soc/intel/apollolake/acpi/northbridge.asl b/src/soc/intel/apollolake/acpi/northbridge.asl index 6a71900e7f..f6b337c0f6 100644 --- a/src/soc/intel/apollolake/acpi/northbridge.asl +++ b/src/soc/intel/apollolake/acpi/northbridge.asl @@ -18,7 +18,7 @@ Device (MCHC) Offset(0xB4), BGSM, 32, /* Base of Graphics Stolen Memory */ Offset(0xBC), - TLUD, 32, /* Top of Low Useable DRAM */ + TLUD, 32, /* Top of Low Usable DRAM */ } } @@ -58,7 +58,7 @@ Method (_CRS, 0, Serialized) * PCI MMIO Region (TOLUD - PCI extended base MMCONF) * This assumes that MMCONF is placed after PCI config space, * and that no resources are allocated after the MMCONF region. - * This works, sicne MMCONF is hardcoded to 0xe00000000. + * This works, since MMCONF is hardcoded to 0xe00000000. */ DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, diff --git a/src/soc/intel/apollolake/romstage.c b/src/soc/intel/apollolake/romstage.c index 1c92b89347..c4d7977c41 100644 --- a/src/soc/intel/apollolake/romstage.c +++ b/src/soc/intel/apollolake/romstage.c @@ -119,7 +119,7 @@ static bool punit_init(void) /* * Poll for bit 8 to check if PCODE has completed its action - * in reponse to BIOS Reset complete. + * in response to BIOS Reset complete. * We wait here till 1 ms for the bit to get set. */ stopwatch_init_msecs_expire(&sw, 1); diff --git a/src/soc/intel/baytrail/Kconfig b/src/soc/intel/baytrail/Kconfig index e5c003af08..dca95e3518 100644 --- a/src/soc/intel/baytrail/Kconfig +++ b/src/soc/intel/baytrail/Kconfig @@ -136,7 +136,7 @@ config HAVE_REFCODE_BLOB bool "Use a binary refcode blob instead of native ModPHY init" default n help - Use the ChromeBook refcode to intitialize high-speed PHYs instead of + Use the ChromeBook refcode to initialize high-speed PHYs instead of native code. if HAVE_REFCODE_BLOB diff --git a/src/soc/intel/braswell/northcluster.c b/src/soc/intel/braswell/northcluster.c index b7ddee42b2..76d532b5cb 100644 --- a/src/soc/intel/braswell/northcluster.c +++ b/src/soc/intel/braswell/northcluster.c @@ -93,7 +93,7 @@ static void nc_read_resources(struct device *dev) if (fsp_reserved_memory_area) { fsp_res_base_k = RES_IN_KiB((unsigned int)fsp_reserved_memory_area); } else { - /* If no FSP reserverd area */ + /* If no FSP reserved area */ fsp_res_base_k = tseg_base_k; } diff --git a/src/soc/intel/broadwell/Kconfig b/src/soc/intel/broadwell/Kconfig index fbd7aea26b..f02e810b23 100644 --- a/src/soc/intel/broadwell/Kconfig +++ b/src/soc/intel/broadwell/Kconfig @@ -23,7 +23,7 @@ config BROADWELL_VBOOT_IN_BOOTBLOCK Broadwell can either start verstage in a separate stage right after the bootblock has run or it can start it after romstage for compatibility reasons. - Broadwell however uses a mrc.bin to initialse memory which + Broadwell however uses a mrc.bin to initialize memory which needs to be located at a fixed offset. Therefore even with a separate verstage starting after the bootblock that same binary is used meaning a jump is made from RW to the RO region diff --git a/src/soc/intel/cannonlake/chip.h b/src/soc/intel/cannonlake/chip.h index b8dfafde46..774b5268db 100644 --- a/src/soc/intel/cannonlake/chip.h +++ b/src/soc/intel/cannonlake/chip.h @@ -436,7 +436,7 @@ struct soc_intel_cannonlake_config { * * In general descriptor provides option to set default cpu flex ratio. * Default cpu flex ratio is 0 ensures booting with non-turbo max frequency. - * Thats the reason FSP skips cpu_ratio override if cpu_ratio is 0. + * That's the reason FSP skips cpu_ratio override if cpu_ratio is 0. * * Only override CPU flex ratio if don't want to boot with non-turbo max. */ diff --git a/src/soc/intel/common/Makefile.inc b/src/soc/intel/common/Makefile.inc index 56e3336fd7..ad987dddcc 100644 --- a/src/soc/intel/common/Makefile.inc +++ b/src/soc/intel/common/Makefile.inc @@ -41,7 +41,7 @@ MMA_TEST_CONFIG_NAMES = $(notdir $(wildcard $(MMA_BLOBS_PATH)/configs/*)) # $(3) is file type, efi for test names (all .EFI files under $(MMA_BLOBS_PATH)/tests ) # , mma for test param (all .BIN files under $(MMA_BLOBS_PATH)/configs/<test name>) # -# $(MMA_BLOBS_PATH)/tests/<testX>.efi has coresponding test params +# $(MMA_BLOBS_PATH)/tests/<testX>.efi has corresponding test params # at $(MMA_BLOBS_PATH)/configs/<testX>/<XYZ>.bin # diff --git a/src/soc/intel/common/block/cpu/car/cache_as_ram.S b/src/soc/intel/common/block/cpu/car/cache_as_ram.S index f0c3149833..cac7854d34 100644 --- a/src/soc/intel/common/block/cpu/car/cache_as_ram.S +++ b/src/soc/intel/common/block/cpu/car/cache_as_ram.S @@ -545,7 +545,7 @@ program_sf2: /* * Calculate the SF Mask 1: - * 1. Calcuate SFWayCnt = IA32_SF_QOS_INFO & Bit [5:0] + * 1. Calculate SFWayCnt = IA32_SF_QOS_INFO & Bit [5:0] * 2. if CONFIG_SF_MASK_2WAYS_PER_BIT: SFWayCnt = SFWayCnt / 2 * 3. Set SF_MASK_1 = ((1 << SFWayCnt) - 1) - IA32_CR_SF_QOS_MASK_2 */ diff --git a/src/soc/intel/common/block/fast_spi/fast_spi.c b/src/soc/intel/common/block/fast_spi/fast_spi.c index 843071e2a8..93de2ecb87 100644 --- a/src/soc/intel/common/block/fast_spi/fast_spi.c +++ b/src/soc/intel/common/block/fast_spi/fast_spi.c @@ -325,7 +325,7 @@ static void fast_spi_enable_ext_bios(void) "Only 32MiB windows are supported for extended BIOS!"); #endif - /* Confgiure DMI Source decode for Extended BIOS Region */ + /* Configure DMI Source decode for Extended BIOS Region */ if (dmi_enable_gpmr(CONFIG_EXT_BIOS_WIN_BASE, CONFIG_EXT_BIOS_WIN_SIZE, soc_get_spi_dmi_destination_id()) == CB_ERR) return; diff --git a/src/soc/intel/common/block/include/intelblocks/tcss.h b/src/soc/intel/common/block/include/intelblocks/tcss.h index 97d63af41a..c07c96cd82 100644 --- a/src/soc/intel/common/block/include/intelblocks/tcss.h +++ b/src/soc/intel/common/block/include/intelblocks/tcss.h @@ -130,7 +130,7 @@ enum pmc_ipc_command_type { struct tcss_mux_info { bool dp; /* DP connected */ bool usb; /* USB connected */ - bool cable; /* Activ/Passive Cable */ + bool cable; /* Active/Passive Cable */ bool polarity; /* polarity of connected device */ bool hpd_lvl; /* HPD Level assert */ bool hpd_irq; /* HPD IRQ assert */ diff --git a/src/soc/intel/common/block/pmc/Kconfig b/src/soc/intel/common/block/pmc/Kconfig index aaf4479745..e3978e29dd 100644 --- a/src/soc/intel/common/block/pmc/Kconfig +++ b/src/soc/intel/common/block/pmc/Kconfig @@ -17,7 +17,7 @@ config SOC_INTEL_COMMON_BLOCK_PMC_DISCOVERABLE bool help Select this on platforms where the PMC device is discoverable - when scanning busses. + when scanning buses. config SOC_INTEL_COMMON_BLOCK_PMC_EPOC bool diff --git a/src/soc/intel/common/block/usb4/Kconfig b/src/soc/intel/common/block/usb4/Kconfig index d4e1c25aa1..bc1eb19d49 100644 --- a/src/soc/intel/common/block/usb4/Kconfig +++ b/src/soc/intel/common/block/usb4/Kconfig @@ -25,4 +25,4 @@ config SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES depends on SOC_INTEL_COMMON_BLOCK_USB4 select PCIEXP_HOTPLUG help - Enable USB4 PCIe resources for reserving hotplug busses and memory. + Enable USB4 PCIe resources for reserving hotplug buses and memory. diff --git a/src/soc/intel/denverton_ns/include/soc/pmc.h b/src/soc/intel/denverton_ns/include/soc/pmc.h index 512f7f5c64..fdb1028f1f 100644 --- a/src/soc/intel/denverton_ns/include/soc/pmc.h +++ b/src/soc/intel/denverton_ns/include/soc/pmc.h @@ -11,7 +11,7 @@ #define MASK_PMC_ACPI_BASE 0xfffc #define PMC_ACPI_CNT 0x44 #define PMC_ACPI_CNT_PWRM_EN (1 << 8) /* PWRM enable */ -#define PMC_ACPI_CNT_ACPI_EN (1 << 7) /* ACPI eanble */ +#define PMC_ACPI_CNT_ACPI_EN (1 << 7) /* ACPI enable */ #define PMC_ACPI_CNT_SCIS ((1 << 2) | (1 << 1) | (1 << 0)) /* SCI IRQ select \ */ #define PMC_ACPI_CNT_SCIS_MASK 0x07 diff --git a/src/soc/intel/quark/Kconfig b/src/soc/intel/quark/Kconfig index 2d09f516a5..1a9bfef942 100644 --- a/src/soc/intel/quark/Kconfig +++ b/src/soc/intel/quark/Kconfig @@ -222,7 +222,7 @@ config STORAGE_TEST select COMMONLIB_STORAGE select SDHCI_CONTROLLER help - Read block 0 from each parition of the storage device. User + Read block 0 from each partition of the storage device. User must also enable one or both of COMMONLIB_STORAGE_SD or COMMONLIB_STORAGE_MMC. diff --git a/src/soc/intel/quark/chip.h b/src/soc/intel/quark/chip.h index 40e823ff92..7308712180 100644 --- a/src/soc/intel/quark/chip.h +++ b/src/soc/intel/quark/chip.h @@ -87,7 +87,7 @@ struct soc_intel_quark_config { uint8_t DramDensity; uint8_t tCL; /* DRAM CAS Latency in clocks */ - /* ECC scrub interval in miliseconds 1..255 (0 works as feature + /* ECC scrub interval in milliseconds 1..255 (0 works as feature * disable) */ uint8_t EccScrubInterval; diff --git a/src/soc/intel/quark/include/soc/QuarkNcSocId.h b/src/soc/intel/quark/include/soc/QuarkNcSocId.h index c7db8d50b9..e4015a2e7c 100644 --- a/src/soc/intel/quark/include/soc/QuarkNcSocId.h +++ b/src/soc/intel/quark/include/soc/QuarkNcSocId.h @@ -55,7 +55,7 @@ // // -// DEVICE 0 (Memroy Controller Hub) +// DEVICE 0 (Memory Controller Hub) // #define MC_BUS PCI_BUS_NUMBER_QNC #define MC_DEV 0x00 @@ -729,7 +729,7 @@ #define V_QNC_PCIE_SLCAP_PSN_OFFSET 19 //Slot number offset #define R_QNC_PCIE_SLCTL 0x58 //~ 59h #define B_QNC_PCIE_SLCTL_HPE (BIT5) // Hot plug intr enable -#define B_QNC_PCIE_SLCTL_PDE (BIT3) // Presense detect enable +#define B_QNC_PCIE_SLCTL_PDE (BIT3) // Presence detect enable #define B_QNC_PCIE_SLCTL_ABE (BIT0) // Attn Btn Pressed Enable #define R_QNC_PCIE_SLSTS 0x5A //~ 5Bh #define B_QNC_PCIE_SLSTS_PDS (BIT6) // Present Detect State diff --git a/src/soc/intel/quark/reg_access.c b/src/soc/intel/quark/reg_access.c index 86713987c0..604561ac47 100644 --- a/src/soc/intel/quark/reg_access.c +++ b/src/soc/intel/quark/reg_access.c @@ -69,7 +69,7 @@ static uint32_t mtrr_index_to_host_bridge_register_offset(unsigned long index) { uint32_t offset; - /* Convert from MTRR index to host brigde offset (Datasheet 12.7.2) */ + /* Convert from MTRR index to host bridge offset (Datasheet 12.7.2) */ if (index == MTRR_CAP_MSR) offset = QUARK_NC_HOST_BRIDGE_IA32_MTRR_CAP; else if (index == MTRR_DEF_TYPE_MSR) diff --git a/src/soc/intel/quark/spi_debug.c b/src/soc/intel/quark/spi_debug.c index b24906515b..a6b5e692ec 100644 --- a/src/soc/intel/quark/spi_debug.c +++ b/src/soc/intel/quark/spi_debug.c @@ -79,7 +79,7 @@ void spi_display(volatile struct flash_ctrlr *ctrlr) printk(BIOS_DEBUG, "0x%08x: BIOS Base Address\n", ctrlr->bbar); /* Display the protection ranges */ - printk(BIOS_DEBUG, "BIOS Protected Range Regsiters\n"); + printk(BIOS_DEBUG, "BIOS Protected Range Registers\n"); for (index = 0; index < ARRAY_SIZE(ctrlr->pbr); index++) { status = ctrlr->pbr[index]; printk(BIOS_DEBUG, " %d: 0x%08x: 0x%08x - 0x%08x %s\n", diff --git a/src/soc/intel/skylake/acpi.c b/src/soc/intel/skylake/acpi.c index 7e06ffa15d..72c5e472de 100644 --- a/src/soc/intel/skylake/acpi.c +++ b/src/soc/intel/skylake/acpi.c @@ -36,7 +36,7 @@ #define CPUID_6_EAX_ISST (1 << 7) /* - * List of suported C-states in this processor. + * List of supported C-states in this processor. */ enum { C_STATE_C0, /* 0 */ diff --git a/src/soc/intel/skylake/include/soc/nhlt.h b/src/soc/intel/skylake/include/soc/nhlt.h index 3d12861139..dd2825590c 100644 --- a/src/soc/intel/skylake/include/soc/nhlt.h +++ b/src/soc/intel/skylake/include/soc/nhlt.h @@ -30,7 +30,7 @@ enum { int nhlt_soc_add_dmic_array(struct nhlt *nhlt, int num_channels); /* - * Add nau88l25 headset codec on provided SSP link. Return 0 on succes, < 0 + * Add nau88l25 headset codec on provided SSP link. Return 0 on success, < 0 * on error. */ int nhlt_soc_add_nau88l25(struct nhlt *nhlt, int hwlink); diff --git a/src/soc/intel/tigerlake/acpi/tcss.asl b/src/soc/intel/tigerlake/acpi/tcss.asl index 98938339bf..2a71b31cae 100644 --- a/src/soc/intel/tigerlake/acpi/tcss.asl +++ b/src/soc/intel/tigerlake/acpi/tcss.asl @@ -511,7 +511,7 @@ Scope (\_SB.PCI0) TACK, 1, /* [16:16] IOM Acknowledge bit */ DPOF, 1, /* [17:17] Set 1 to indicate IOM, all the */ /* display is OFF, clear otherwise */ - Offset(0x70), /* Pyhsical addr is offset 0x70. */ + Offset(0x70), /* Physical addr is offset 0x70. */ IMCD, 32, /* R_SA_IOM_BIOS_MAIL_BOX_CMD */ IMDA, 32 /* R_SA_IOM_BIOS_MAIL_BOX_DATA */ } diff --git a/src/soc/intel/xeon_sp/util.c b/src/soc/intel/xeon_sp/util.c index ce0b1a6fc4..579ebbcfcd 100644 --- a/src/soc/intel/xeon_sp/util.c +++ b/src/soc/intel/xeon_sp/util.c @@ -168,7 +168,7 @@ void xeonsp_init_cpu_config(void) unsigned int num_sockets; /* - * sort APIC ids in asending order to identify apicid ranges for + * sort APIC ids in ascending order to identify apicid ranges for * each numa domain */ for (dev = all_devices; dev; dev = dev->next) { diff --git a/src/soc/mediatek/common/include/soc/eint_event.h b/src/soc/mediatek/common/include/soc/eint_event.h index 98db7b04e8..6d544b4e7a 100644 --- a/src/soc/mediatek/common/include/soc/eint_event.h +++ b/src/soc/mediatek/common/include/soc/eint_event.h @@ -6,7 +6,7 @@ #include <device/mmio.h> #include <soc/addressmap.h> -/* eint event mask cler register */ +/* eint event mask clear register */ struct eint_event_reg { uint32_t eint_event_mask_clr[7]; }; diff --git a/src/soc/mediatek/common/mmu_operations.c b/src/soc/mediatek/common/mmu_operations.c index 960d742d63..340f9ec989 100644 --- a/src/soc/mediatek/common/mmu_operations.c +++ b/src/soc/mediatek/common/mmu_operations.c @@ -50,6 +50,6 @@ void mtk_mmu_disable_l2c_sram(void) mtk_soc_disable_l2c_sram(); - /* Reenable MMU with now enlarged L2 cache. Page tables still valid. */ + /* Re-enable MMU with now enlarged L2 cache. Page tables still valid. */ mmu_enable(); } diff --git a/src/soc/mediatek/mt8173/dramc_pi_basic_api.c b/src/soc/mediatek/mt8173/dramc_pi_basic_api.c index 009d03a154..23a9403acf 100644 --- a/src/soc/mediatek/mt8173/dramc_pi_basic_api.c +++ b/src/soc/mediatek/mt8173/dramc_pi_basic_api.c @@ -777,7 +777,7 @@ u32 dramc_engine2(u32 channel, enum dram_tw_op wr, u32 test2_1, u32 test2_2, * ISI 0 | 0 * AUD 0 | 1 * XTALK 1 | 0 - * UNKNOW 1 | 1 + * UNKNOWN 1 | 1 */ switch (testaudpat) { case XTALK: diff --git a/src/soc/mediatek/mt8192/pll.c b/src/soc/mediatek/mt8192/pll.c index f0a9509173..e49e222c7c 100644 --- a/src/soc/mediatek/mt8192/pll.c +++ b/src/soc/mediatek/mt8192/pll.c @@ -524,7 +524,7 @@ u32 mt_fmeter_get_freq_khz(enum fmeter_type type, u32 id) SET32_BITFIELDS(&mtk_topckgen->clk_misc_cfg_0, CLK_MISC_CFG_0_METER_DIV, 0); } else { - die("unsupport fmeter type\n"); + die("unsupported fmeter type\n"); } /* enable frequency meter */ diff --git a/src/soc/mediatek/mt8195/pll.c b/src/soc/mediatek/mt8195/pll.c index 74dd1509f3..8fd424dc49 100644 --- a/src/soc/mediatek/mt8195/pll.c +++ b/src/soc/mediatek/mt8195/pll.c @@ -844,7 +844,7 @@ u32 mt_fmeter_get_freq_khz(enum fmeter_type type, u32 id) SET32_BITFIELDS(&mtk_topckgen->clk_misc_cfg_0, CLK_MISC_CFG_0_METER_DIV, 0); } else { - die("unsupport fmeter type\n"); + die("unsupported fmeter type\n"); } /* enable frequency meter */ diff --git a/src/soc/nvidia/tegra124/chip.h b/src/soc/nvidia/tegra124/chip.h index 0d1fb19dd2..bc033c9f35 100644 --- a/src/soc/nvidia/tegra124/chip.h +++ b/src/soc/nvidia/tegra124/chip.h @@ -54,7 +54,7 @@ struct soc_nvidia_tegra124_config { /* Delay before from power on asserting vdd */ int vdd_delay_ms; - /* Delay beween pwm and backlight_en_gpio is asserted */ + /* Delay between pwm and backlight_en_gpio is asserted */ int pwm_to_bl_delay_ms; /* Delay before HPD high */ diff --git a/src/soc/nvidia/tegra124/dp.c b/src/soc/nvidia/tegra124/dp.c index 4155c34b21..5da2c066f5 100644 --- a/src/soc/nvidia/tegra124/dp.c +++ b/src/soc/nvidia/tegra124/dp.c @@ -465,7 +465,7 @@ static int _tegra_dp_lower_link_config(struct tegra_dc_dp_data *dp, return (cfg->lane_count > 0) ? DP_LT_SUCCESS : DP_LT_FAILED; } -/* Calcuate if given cfg can meet the mode request. */ +/* Calculate if given cfg can meet the mode request. */ /* Return true if mode is possible, false otherwise. */ static int tegra_dc_dp_calc_config(struct tegra_dc_dp_data *dp, const struct soc_nvidia_tegra124_config *config, diff --git a/src/soc/nvidia/tegra210/Kconfig b/src/soc/nvidia/tegra210/Kconfig index 4fcbaffbee..0244b47def 100644 --- a/src/soc/nvidia/tegra210/Kconfig +++ b/src/soc/nvidia/tegra210/Kconfig @@ -79,7 +79,7 @@ config CONSOLE_SERIAL_TEGRA210_UART_ADDRESS default 0x70006300 if CONSOLE_SERIAL_TEGRA210_UARTD default 0x70006400 if CONSOLE_SERIAL_TEGRA210_UARTE help - Map the UART names to the respective MMIO addres. + Map the UART names to the respective MMIO addresses. config BOOTROM_SDRAM_INIT bool "SoC BootROM does SDRAM init with full BCT" diff --git a/src/soc/nvidia/tegra210/Makefile.inc b/src/soc/nvidia/tegra210/Makefile.inc index f76ab347e0..5846be9809 100644 --- a/src/soc/nvidia/tegra210/Makefile.inc +++ b/src/soc/nvidia/tegra210/Makefile.inc @@ -137,7 +137,7 @@ req_tz_size=$(shell expr $(ttb_size) + $(sec_size)) tz_size=$(shell printf "%d" $(CONFIG_TRUSTZONE_CARVEOUT_SIZE_MB)) ifeq ($(shell test $(tz_size) -lt $(req_tz_size) && echo 1), 1) - $(error "TRUSTZONE_CARVEOUT_SIZE_MB should be atleast as big as TTB_SIZE_MB + SEC_COMPONENT_SIZE_MB") + $(error "TRUSTZONE_CARVEOUT_SIZE_MB should be at least as big as TTB_SIZE_MB + SEC_COMPONENT_SIZE_MB") endif # BL31 component is placed towards the end of 32-bit address space. This assumes diff --git a/src/soc/nvidia/tegra210/dp.c b/src/soc/nvidia/tegra210/dp.c index 9c55242765..a2b06b160e 100644 --- a/src/soc/nvidia/tegra210/dp.c +++ b/src/soc/nvidia/tegra210/dp.c @@ -477,7 +477,7 @@ static int _tegra_dp_lower_link_config(struct tegra_dc_dp_data *dp, return (link_cfg->lane_count > 0) ? DP_LT_SUCCESS : DP_LT_FAILED; } -/* Calcuate if given cfg can meet the mode request. */ +/* Calculate if given cfg can meet the mode request. */ /* Return true if mode is possible, false otherwise. */ static int tegra_dc_dp_calc_config(struct tegra_dc_dp_data *dp, const struct soc_nvidia_tegra210_config *config, diff --git a/src/soc/nvidia/tegra210/include/soc/addressmap.h b/src/soc/nvidia/tegra210/include/soc/addressmap.h index 31ed4f256c..bd9a25c3e6 100644 --- a/src/soc/nvidia/tegra210/include/soc/addressmap.h +++ b/src/soc/nvidia/tegra210/include/soc/addressmap.h @@ -94,7 +94,7 @@ enum { /* Return total size of DRAM memory configured on the platform. */ int sdram_size_mb(void); -/* Find memory below and above 4GiB boundary repsectively. All units 1MiB. */ +/* Find memory below and above 4GiB boundary respectively. All units 1MiB. */ void memory_in_range_below_4gb(uintptr_t *base_mib, uintptr_t *end_mib); void memory_in_range_above_4gb(uintptr_t *base_mib, uintptr_t *end_mib); diff --git a/src/soc/nvidia/tegra210/mipi_dsi.c b/src/soc/nvidia/tegra210/mipi_dsi.c index cd1b822a05..067dc6d618 100644 --- a/src/soc/nvidia/tegra210/mipi_dsi.c +++ b/src/soc/nvidia/tegra210/mipi_dsi.c @@ -193,7 +193,7 @@ ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, /* * DCS long write packets contain the word count in the header * bytes 1 and 2 and have a payload containing the DCS command - * byte folowed by word count minus one bytes. + * byte followed by word count minus one bytes. * * DCS short write packets encode the DCS command and up to * one parameter in header bytes 1 and 2. diff --git a/src/soc/nvidia/tegra210/sdram.c b/src/soc/nvidia/tegra210/sdram.c index 8ffa0e500a..702897f1ae 100644 --- a/src/soc/nvidia/tegra210/sdram.c +++ b/src/soc/nvidia/tegra210/sdram.c @@ -155,7 +155,7 @@ static void sdram_set_pad_macros(const struct sdram_params *param, /* * Program CMD mapping. Required before brick mapping, else - * we can't gaurantee CK will be differential at all times. + * we can't guarantee CK will be differential at all times. */ write32(®s->fbio_cfg7, param->EmcFbioCfg7); @@ -979,7 +979,7 @@ static void sdram_set_refresh(const struct sdram_params *param, /* Enable EMC pipe clock gating */ write32(®s->cfg_pipe_clk, param->EmcCfgPipeClk); - /* Depending on freqency, enable CMD/CLK fdpd */ + /* Depending on frequency, enable CMD/CLK fdpd */ write32(®s->fdpd_ctrl_cmd_no_ramp, param->EmcFdpdCtrlCmdNoRamp); } diff --git a/src/soc/qualcomm/ipq40xx/gpio.c b/src/soc/qualcomm/ipq40xx/gpio.c index e7874a786a..8e248c50cd 100644 --- a/src/soc/qualcomm/ipq40xx/gpio.c +++ b/src/soc/qualcomm/ipq40xx/gpio.c @@ -18,7 +18,7 @@ static inline int gpio_not_valid(gpio_t gpio) } /******************************************************* -Function description: configure GPIO functinality +Function description: configure GPIO functionality Arguments : gpio_t gpio - Gpio number unsigned func - Functionality number @@ -77,7 +77,7 @@ void gpio_tlmm_config_get(gpio_t gpio, unsigned int *func, } /******************************************************* -Function description: get GPIO IO functinality details +Function description: get GPIO IO functionality details Arguments : gpio_t gpio - Gpio number unsigned *in - Value of GPIO input diff --git a/src/soc/qualcomm/ipq40xx/spi.c b/src/soc/qualcomm/ipq40xx/spi.c index da7a6d3560..31677e460f 100644 --- a/src/soc/qualcomm/ipq40xx/spi.c +++ b/src/soc/qualcomm/ipq40xx/spi.c @@ -328,7 +328,7 @@ static unsigned char spi_read_byte(struct ipq_spi_slave *ds) } /* - * Function to check wheather Input or Output FIFO + * Function to check whether Input or Output FIFO * has data to be serviced */ static int check_fifo_status(void *reg_addr) @@ -627,7 +627,7 @@ static int spi_ctrlr_setup(const struct spi_slave *slave) || ((bus == BLSP0_SPI) && (cs > 2)) || ((bus == BLSP1_SPI) && (cs > 0))) { printk(BIOS_ERR, - "SPI error: unsupported bus %d (Supported busses 0, 1 and 2) " + "SPI error: unsupported bus %d (Supported buses 0, 1 and 2) " "or chipselect\n", bus); return -1; } diff --git a/src/soc/qualcomm/ipq806x/gpio.c b/src/soc/qualcomm/ipq806x/gpio.c index e7874a786a..8e248c50cd 100644 --- a/src/soc/qualcomm/ipq806x/gpio.c +++ b/src/soc/qualcomm/ipq806x/gpio.c @@ -18,7 +18,7 @@ static inline int gpio_not_valid(gpio_t gpio) } /******************************************************* -Function description: configure GPIO functinality +Function description: configure GPIO functionality Arguments : gpio_t gpio - Gpio number unsigned func - Functionality number @@ -77,7 +77,7 @@ void gpio_tlmm_config_get(gpio_t gpio, unsigned int *func, } /******************************************************* -Function description: get GPIO IO functinality details +Function description: get GPIO IO functionality details Arguments : gpio_t gpio - Gpio number unsigned *in - Value of GPIO input diff --git a/src/soc/qualcomm/ipq806x/i2c.c b/src/soc/qualcomm/ipq806x/i2c.c index ce420af46e..cce7ed94c7 100644 --- a/src/soc/qualcomm/ipq806x/i2c.c +++ b/src/soc/qualcomm/ipq806x/i2c.c @@ -84,7 +84,7 @@ static int i2c_init(unsigned int bus) qup_config = &gsbi7_qup_config; break; default: - printk(BIOS_ERR, "QUP configuration not defind for GSBI%d.\n", + printk(BIOS_ERR, "QUP configuration not defined for GSBI%d.\n", gsbi_id); return 1; } diff --git a/src/soc/qualcomm/ipq806x/spi.c b/src/soc/qualcomm/ipq806x/spi.c index 2b18bda608..c538c279e8 100644 --- a/src/soc/qualcomm/ipq806x/spi.c +++ b/src/soc/qualcomm/ipq806x/spi.c @@ -758,7 +758,7 @@ static int spi_ctrlr_setup(const struct spi_slave *slave) || ((bus == GSBI6_SPI) && (cs > 0)) || ((bus == GSBI7_SPI) && (cs > 0))) { printk(BIOS_ERR, "SPI error: unsupported bus %d " - "(Supported busses 0,1 and 2) or chipselect\n", bus); + "(Supported buses 0,1 and 2) or chipselect\n", bus); } for (i = 0; i < ARRAY_SIZE(spi_slave_pool); i++) { diff --git a/src/soc/qualcomm/ipq806x/uart.c b/src/soc/qualcomm/ipq806x/uart.c index 3a3a8bf27b..15a0998fb5 100644 --- a/src/soc/qualcomm/ipq806x/uart.c +++ b/src/soc/qualcomm/ipq806x/uart.c @@ -367,7 +367,7 @@ uint8_t uart_rx_byte(unsigned int idx) return byte; } -/* TODO: Implement fuction */ +/* TODO: Implement function */ void uart_fill_lb(void *data) { } diff --git a/src/soc/qualcomm/qcs405/spi.c b/src/soc/qualcomm/qcs405/spi.c index 4607dc1ec3..e212b84421 100644 --- a/src/soc/qualcomm/qcs405/spi.c +++ b/src/soc/qualcomm/qcs405/spi.c @@ -376,7 +376,7 @@ static unsigned char spi_read_byte(struct qcs_spi_slave *ds) } /* - * Function to check wheather Input or Output FIFO + * Function to check whether Input or Output FIFO * has data to be serviced */ static int check_fifo_status(void *reg_addr) diff --git a/src/soc/samsung/exynos5250/dmc_init_ddr3.c b/src/soc/samsung/exynos5250/dmc_init_ddr3.c index f4150203ea..33725bcd6a 100644 --- a/src/soc/samsung/exynos5250/dmc_init_ddr3.c +++ b/src/soc/samsung/exynos5250/dmc_init_ddr3.c @@ -124,7 +124,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size, if (mem_reset) { /* Send NOP, MRS and ZQINIT commands. * Sending MRS command will reset the DRAM. We should not be - * reseting the DRAM after resume, this will lead to memory + * resetting the DRAM after resume, this will lead to memory * corruption as DRAM content is lost after DRAM reset */ dmc_config_mrs(mem, exynos_dmc); diff --git a/src/soc/samsung/exynos5250/include/soc/gpio.h b/src/soc/samsung/exynos5250/include/soc/gpio.h index 5a58b292f6..ede70d3b20 100644 --- a/src/soc/samsung/exynos5250/include/soc/gpio.h +++ b/src/soc/samsung/exynos5250/include/soc/gpio.h @@ -546,7 +546,7 @@ int gpio_set_value(unsigned int gpio, int value); enum mvl3 { LOGIC_0, LOGIC_1, - LOGIC_Z, /* high impedence / tri-stated / floating */ + LOGIC_Z, /* high impedance / tri-stated / floating */ }; #endif /* CPU_SAMSUNG_EXYNOS5250_GPIO_H */ diff --git a/src/soc/samsung/exynos5420/dmc_init_ddr3.c b/src/soc/samsung/exynos5420/dmc_init_ddr3.c index b1eae89817..a187f6e090 100644 --- a/src/soc/samsung/exynos5420/dmc_init_ddr3.c +++ b/src/soc/samsung/exynos5420/dmc_init_ddr3.c @@ -147,7 +147,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int interleave_size, int reset) if (reset) { /* Send NOP, MRS and ZQINIT commands. * Sending MRS command will reset the DRAM. We should not be - * reseting the DRAM after resume, this will lead to memory + * resetting the DRAM after resume, this will lead to memory * corruption as DRAM content is lost after DRAM reset. */ dmc_config_mrs(mem, exynos_drex0); diff --git a/src/soc/sifive/fu540/ux00ddr.h b/src/soc/sifive/fu540/ux00ddr.h index 14a628d441..cc675080dc 100644 --- a/src/soc/sifive/fu540/ux00ddr.h +++ b/src/soc/sifive/fu540/ux00ddr.h @@ -82,14 +82,14 @@ static inline void ux00ddr_mask_mc_init_complete_interrupt(size_t ahbregaddr) { static inline void ux00ddr_mask_outofrange_interrupts(size_t ahbregaddr) { // Mask off Bit 8, Bit 2 and Bit 1 of Interrupt Status - // Bit [2] Multiple accesses outside the defined PHYSICAL memory space have occured - // Bit [1] A memory access outside the defined PHYSICAL memory space has occured + // Bit [2] Multiple accesses outside the defined PHYSICAL memory space have occurred + // Bit [1] A memory access outside the defined PHYSICAL memory space has occurred _REG32(136<<2, ahbregaddr) |= ((1<<OUT_OF_RANGE_OFFSET) | (1<<MULTIPLE_OUT_OF_RANGE_OFFSET)); } static inline void ux00ddr_mask_port_command_error_interrupt(size_t ahbregaddr) { // Mask off Bit 7 of Interrupt Status - // Bit [7] An error occured on the port command channel + // Bit [7] An error occurred on the port command channel _REG32(136<<2, ahbregaddr) |= (1<<PORT_COMMAND_CHANNEL_ERROR_OFFSET); } diff --git a/src/southbridge/amd/agesa/hudson/acpi/fch.asl b/src/southbridge/amd/agesa/hudson/acpi/fch.asl index 38f2bca6da..b87b9e4946 100644 --- a/src/southbridge/amd/agesa/hudson/acpi/fch.asl +++ b/src/southbridge/amd/agesa/hudson/acpi/fch.asl @@ -67,7 +67,7 @@ Name(CRES, ResourceTemplate() { * The Secondary bus range for PCI0 lets the system * know what bus values are allowed on the downstream * side of this PCI bus if there is a PCI-PCI bridge. - * PCI busses can have 256 secondary busses which + * PCI buses can have 256 secondary buses which * range from [0-0xFF] but they do not need to be * sequential. */ diff --git a/src/southbridge/amd/cimx/sb800/acpi/fch.asl b/src/southbridge/amd/cimx/sb800/acpi/fch.asl index 2059db0594..88fbf7b48c 100644 --- a/src/southbridge/amd/cimx/sb800/acpi/fch.asl +++ b/src/southbridge/amd/cimx/sb800/acpi/fch.asl @@ -77,7 +77,7 @@ Name(CRES, ResourceTemplate() { * The Secondary bus range for PCI0 lets the system * know what bus values are allowed on the downstream * side of this PCI bus if there is a PCI-PCI bridge. - * PCI busses can have 256 secondary busses which + * PCI buses can have 256 secondary buses which * range from [0-0xFF] but they do not need to be * sequential. */ diff --git a/src/southbridge/amd/pi/hudson/acpi/fch.asl b/src/southbridge/amd/pi/hudson/acpi/fch.asl index 88cf47f7ef..9a2c7445db 100644 --- a/src/southbridge/amd/pi/hudson/acpi/fch.asl +++ b/src/southbridge/amd/pi/hudson/acpi/fch.asl @@ -50,7 +50,7 @@ Name(CRES, ResourceTemplate() { * The Secondary bus range for PCI0 lets the system * know what bus values are allowed on the downstream * side of this PCI bus if there is a PCI-PCI bridge. - * PCI busses can have 256 secondary busses which + * PCI buses can have 256 secondary buses which * range from [0-0xFF] but they do not need to be * sequential. */ diff --git a/src/southbridge/intel/bd82x6x/azalia.c b/src/southbridge/intel/bd82x6x/azalia.c index 1f14c422a8..3b07a15298 100644 --- a/src/southbridge/intel/bd82x6x/azalia.c +++ b/src/southbridge/intel/bd82x6x/azalia.c @@ -162,7 +162,7 @@ static void azalia_init(struct device *dev) if (!res) return; - // NOTE this will break as soon as the Azalia get's a bar above 4G. + // NOTE this will break as soon as the Azalia gets a bar above 4G. // Is there anything we can do about it? base = res2mmio(res, 0, 0); printk(BIOS_DEBUG, "Azalia: base = %p\n", base); diff --git a/src/southbridge/intel/bd82x6x/lpc.c b/src/southbridge/intel/bd82x6x/lpc.c index b4f0c4c5fc..dfebaf0dac 100644 --- a/src/southbridge/intel/bd82x6x/lpc.c +++ b/src/southbridge/intel/bd82x6x/lpc.c @@ -31,7 +31,7 @@ typedef struct southbridge_intel_bd82x6x_config config_t; /** - * Set miscellanous static southbridge features. + * Set miscellaneous static southbridge features. * * @param dev PCI device with I/O APIC control registers */ diff --git a/src/southbridge/intel/i82371eb/acpi_tables.c b/src/southbridge/intel/i82371eb/acpi_tables.c index 7507cd5d5d..41fc4eeaa1 100644 --- a/src/southbridge/intel/i82371eb/acpi_tables.c +++ b/src/southbridge/intel/i82371eb/acpi_tables.c @@ -29,7 +29,7 @@ void generate_cpu_entries(const struct device *device) int numcpus = determine_total_number_of_cores(); printk(BIOS_DEBUG, "Found %d CPU(s).\n", numcpus); - /* without the outer scope, furhter ssdt addition will end up + /* without the outer scope, further ssdt addition will end up * within the processor statement */ acpigen_write_scope("\\_SB"); for (cpu=0; cpu < numcpus; cpu++) { diff --git a/src/southbridge/intel/i82371eb/smbus.c b/src/southbridge/intel/i82371eb/smbus.c index 988d7418d3..5b9f8be30e 100644 --- a/src/southbridge/intel/i82371eb/smbus.c +++ b/src/southbridge/intel/i82371eb/smbus.c @@ -27,7 +27,7 @@ static void pwrmgt_enable(struct device *dev) * bit25 (lid_pol): 1=invert lid polarity * bit24 (sm_freeze): 1=freeze idle and standby timers * bit16 (end of smi): 0=disable smi assertion (cleared by hw) - * bits8-15,26: global standby timer inital count 127 * 4minutes + * bits8-15,26: global standby timer initial count 127 * 4minutes * bit2 (thrm_pol): 1=active low THRM# * bit0 (smi_en): 1=disable smi generation upon smi event */ diff --git a/src/southbridge/intel/i82801dx/lpc.c b/src/southbridge/intel/i82801dx/lpc.c index 6ff606422b..321c605366 100644 --- a/src/southbridge/intel/i82801dx/lpc.c +++ b/src/southbridge/intel/i82801dx/lpc.c @@ -32,7 +32,7 @@ static void i82801dx_enable_acpi(struct device *dev) } /** - * Set miscellanous static southbridge features. + * Set miscellaneous static southbridge features. * * @param dev PCI device with I/O APIC control registers */ diff --git a/src/southbridge/intel/i82801gx/azalia.c b/src/southbridge/intel/i82801gx/azalia.c index fde06b4aac..0473de64de 100644 --- a/src/southbridge/intel/i82801gx/azalia.c +++ b/src/southbridge/intel/i82801gx/azalia.c @@ -190,7 +190,7 @@ static void azalia_init(struct device *dev) if (!res) return; - // NOTE this will break as soon as the Azalia get's a bar above 4G. + // NOTE this will break as soon as the Azalia gets a bar above 4G. // Is there anything we can do about it? base = res2mmio(res, 0, 0); printk(BIOS_DEBUG, "Azalia: base = %08x\n", (u32)(uintptr_t)base); diff --git a/src/southbridge/intel/i82801ix/azalia.c b/src/southbridge/intel/i82801ix/azalia.c index ff890a265f..90d784cd65 100644 --- a/src/southbridge/intel/i82801ix/azalia.c +++ b/src/southbridge/intel/i82801ix/azalia.c @@ -183,7 +183,7 @@ static void azalia_init(struct device *dev) if (!res) return; - // NOTE this will break as soon as the Azalia get's a bar above 4G. + // NOTE this will break as soon as the Azalia gets a bar above 4G. // Is there anything we can do about it? base = res2mmio(res, 0, 0); printk(BIOS_DEBUG, "Azalia: base = %p\n", base); diff --git a/src/southbridge/intel/i82801jx/azalia.c b/src/southbridge/intel/i82801jx/azalia.c index 5efbc9f601..885c332f8f 100644 --- a/src/southbridge/intel/i82801jx/azalia.c +++ b/src/southbridge/intel/i82801jx/azalia.c @@ -183,7 +183,7 @@ static void azalia_init(struct device *dev) if (!res) return; - // NOTE this will break as soon as the Azalia get's a bar above 4G. + // NOTE this will break as soon as the Azalia gets a bar above 4G. // Is there anything we can do about it? base = res2mmio(res, 0, 0); printk(BIOS_DEBUG, "Azalia: base = %p\n", base); diff --git a/src/southbridge/intel/ibexpeak/azalia.c b/src/southbridge/intel/ibexpeak/azalia.c index ef781b7174..683715fd6b 100644 --- a/src/southbridge/intel/ibexpeak/azalia.c +++ b/src/southbridge/intel/ibexpeak/azalia.c @@ -162,7 +162,7 @@ static void azalia_init(struct device *dev) if (!res) return; - // NOTE this will break as soon as the Azalia get's a bar above 4G. + // NOTE this will break as soon as the Azalia gets a bar above 4G. // Is there anything we can do about it? base = res2mmio(res, 0, 0); printk(BIOS_DEBUG, "Azalia: base = %p\n", base); diff --git a/src/southbridge/intel/ibexpeak/lpc.c b/src/southbridge/intel/ibexpeak/lpc.c index 8cc9b42c17..c14c6a28b1 100644 --- a/src/southbridge/intel/ibexpeak/lpc.c +++ b/src/southbridge/intel/ibexpeak/lpc.c @@ -28,7 +28,7 @@ typedef struct southbridge_intel_ibexpeak_config config_t; /** - * Set miscellanous static southbridge features. + * Set miscellaneous static southbridge features. * * @param dev PCI device with I/O APIC control registers */ diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c index f3c08d885f..d0eb4b33f0 100644 --- a/src/southbridge/intel/lynxpoint/lpc.c +++ b/src/southbridge/intel/lynxpoint/lpc.c @@ -25,7 +25,7 @@ #define NMI_OFF 0 /** - * Set miscellanous static southbridge features. + * Set miscellaneous static southbridge features. * * @param dev PCI device with I/O APIC control registers */ diff --git a/src/southbridge/intel/lynxpoint/me_status.c b/src/southbridge/intel/lynxpoint/me_status.c index 82a8f8ed0a..fb4490f867 100644 --- a/src/southbridge/intel/lynxpoint/me_status.c +++ b/src/southbridge/intel/lynxpoint/me_status.c @@ -187,7 +187,7 @@ void intel_me_status(struct me_hfs *hfs, struct me_hfs2 *hfs2) break; default: - printk(BIOS_DEBUG, "Unknown phase: 0x%02x sate: 0x%02x", + printk(BIOS_DEBUG, "Unknown phase: 0x%02x state: 0x%02x", hfs2->progress_code, hfs2->current_state); } printk(BIOS_DEBUG, "\n"); diff --git a/src/southbridge/intel/lynxpoint/pch.h b/src/southbridge/intel/lynxpoint/pch.h index 598c2dc7b2..7d9fc6d6af 100644 --- a/src/southbridge/intel/lynxpoint/pch.h +++ b/src/southbridge/intel/lynxpoint/pch.h @@ -647,7 +647,7 @@ void mainboard_config_rcba(void); #define SPIBAR16(x) RCBA16((x) + SPIBAR_OFFSET) #define SPIBAR32(x) RCBA32((x) + SPIBAR_OFFSET) -/* Reigsters within the SPIBAR */ +/* Registers within the SPIBAR */ #define SSFC 0x91 #define FDOC 0xb0 #define FDOD 0xb4 diff --git a/src/superio/acpi/pnp_config.asl b/src/superio/acpi/pnp_config.asl index 0257cc7959..7ce8fd5fc4 100644 --- a/src/superio/acpi/pnp_config.asl +++ b/src/superio/acpi/pnp_config.asl @@ -26,7 +26,7 @@ Mutex(CONF_MODE_MUTEX, 1) /* - * Enter configuration mode (and aquire mutex) + * Enter configuration mode (and acquire mutex) * Method must be run before accessing the configuration region. * Parameter is the LDN which should be accessed. Values >= 0xFF mean * no LDN switch should be done. diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h index 949ec116f5..38cfe3b20e 100644 --- a/src/superio/ite/it8772f/it8772f.h +++ b/src/superio/ite/it8772f/it8772f.h @@ -103,7 +103,7 @@ enum thermal_mode { /* GPIO Polarity Select: 1: Inverting, 0: Non-inverting */ #define GPIO_REG_POLARITY(x) (0xb0 + (x)) -/* GPIO Inernal Pull-up: 1: Enable, 0: Disable */ +/* GPIO Internal Pull-up: 1: Enable, 0: Disable */ #define GPIO_REG_PULLUP(x) (0xb8 + (x)) /* GPIO Function Select: 1: Simple I/O, 0: Alternate function */ diff --git a/src/superio/winbond/w83627hf/acpi/superio.asl b/src/superio/winbond/w83627hf/acpi/superio.asl index 5e23cb0a96..20610301d6 100644 --- a/src/superio/winbond/w83627hf/acpi/superio.asl +++ b/src/superio/winbond/w83627hf/acpi/superio.asl @@ -33,10 +33,10 @@ * NO_W83627HF_GAME: don't expose the game port * NO_W83627HF_MIDI: don't expose the MIDI port * NO_W83627HF_HWMON: don't expose the hardware monitor as - * PnP "Motherboard Ressource" + * PnP "Motherboard Resource" * W83627HF_KBC_COMPAT: show the keyboard controller and the PS/2 mouse as * enabled if it is disabled but an address is assigned - * to it. This may be neccessary in some cases. + * to it. This may be necessary in some cases. * * Datasheet: "W83627HF/F WINBOND I/O" rev. 6.0 * http://www.itox.com/pages/support/wdt/W83627HF.pdf @@ -115,14 +115,14 @@ Device(SIO) { Offset (0x74), DMA0, 8, /* DMA */ Offset (0xE0), - /* CRE0-CRE4: function logical device dependant, seems to be reserved for ACPI settings */ + /* CRE0-CRE4: function logical device dependent, seems to be reserved for ACPI settings */ CRE0, 8, CRE1, 8, CRE2, 8, CRE3, 8, CRE4, 8, Offset (0xF0), - /* OPT1-OPTA aka CRF0-CRF9: function logical device dependant */ + /* OPT1-OPTA aka CRF0-CRF9: function logical device dependent */ OPT1, 8, OPT2, 8, OPT3, 8, @@ -143,7 +143,7 @@ Device(SIO) { }) } - /* Enter configuration mode (and aquire mutex) + /* Enter configuration mode (and acquire mutex) Method must be run before accessing the configuration region. Parameter is the LDN which should be accessed. Values >= 0xFF mean no LDN switch should be done. |