summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorUwe Hermann <uwe@hermann-uwe.de>2007-10-24 20:17:04 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2007-10-24 20:17:04 +0000
commitcb00e7ab94e93dd8e4c16a025df42d8de89da3e8 (patch)
tree997a64b2099984f73f0cf66a818117885bf6d223 /src
parentbf873e4ae3e95e92c829cfec1d1efacbd25ba7ea (diff)
Some fixes for the BCOM WinNET100, mostly in Config.lb:
- Add missing entry for the NIC: device pci 0f.0 on end # Ethernet (onboard) - Drop the following lines: register "com1" = "{115200}" register "com2" = "{38400}" Those entries hardcode the BAUD rate (as far as I can tell, please correct me if I'm wrong). We don't want that -- instead the config option TTYS0_BAUD in Options.lb should be used(?) I verified that dropping those lines will not break serial output (COM1, 115200, 8n1). - Enable IDE (PCI device 00:12.2) and add the following register lines to tell the CS5530 code to actually enable IDE channel 0: register "ide0_enable" = "1" register "ide1_enable" = "0" # Not available/needed on this board Tested with a 2.5" hard drive and FILO, works fine. - Enable USB (PCI device 00:13.0), not sure why it was commented. - Enable COM2 as it's used by the smartcard reader. - Add CONFIG_COMPRESSED_PAYLOAD_LZMA to Options.lb, in order to fix abuild for this board. - Add some more comments. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2896 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/mainboard/bcom/winnet100/Config.lb96
-rw-r--r--src/mainboard/bcom/winnet100/Options.lb1
2 files changed, 51 insertions, 46 deletions
diff --git a/src/mainboard/bcom/winnet100/Config.lb b/src/mainboard/bcom/winnet100/Config.lb
index 32eddfbeb8..63439fa991 100644
--- a/src/mainboard/bcom/winnet100/Config.lb
+++ b/src/mainboard/bcom/winnet100/Config.lb
@@ -79,55 +79,59 @@ mainboardinit ./auto.inc
dir /pc80
config chip.h
-chip northbridge/amd/gx1
- device pci_domain 0 on
- device pci 0.0 on end
- chip southbridge/amd/cs5530
- device pci 12.0 on
- chip superio/nsc/pc97317
- device pnp 2e.0 on # PS/2 keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.1 on # PS/2 mouse
- irq 0x70 = 12
- end
- device pnp 2e.2 on # RTC
- io 0x60 = 0x70
- irq 0x70 = 8
- end
- device pnp 2e.3 off # Floppy
- end
- device pnp 2e.4 on # Parallel port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.5 off # COM2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.6 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.7 on # GPIO
- io 0x60 = 0xe0
- end
- device pnp 2e.8 on # Power management
- io 0x60 = 0xe800
- end
- register "com1" = "{115200}"
- register "com2" = "{38400}"
+chip northbridge/amd/gx1 # Northbridge
+ device pci_domain 0 on # PCI domain
+ device pci 0.0 on end # Host bridge
+ chip southbridge/amd/cs5530 # Southbridge
+ device pci 0f.0 on end # Ethernet (onboard)
+ device pci 12.0 on # ISA bridge
+ chip superio/nsc/pc97317 # Super I/O
+ device pnp 2e.0 on # PS/2 keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
end
- device pci 12.1 off end # SMI
- device pci 12.2 off end # IDE
- device pci 12.3 on end # Audio
- device pci 12.4 on end # VGA
- # device pci 13.0 on end # USB
+ device pnp 2e.1 on # PS/2 mouse
+ irq 0x70 = 12
+ end
+ device pnp 2e.2 on # RTC, Advanced power control (APC)
+ io 0x60 = 0x70
+ irq 0x70 = 8
+ end
+ device pnp 2e.3 off # Floppy (N/A on this board)
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.4 on # Parallel port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.5 on # COM2 (used for smartcard reader)
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.6 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.7 on # GPIO
+ io 0x60 = 0xe0
+ end
+ device pnp 2e.8 on # Power management
+ io 0x60 = 0xe8
+ end
+ end
end
+ device pci 12.1 off end # SMI
+ device pci 12.2 on end # IDE
+ device pci 12.3 on end # Audio
+ device pci 12.4 on end # VGA (onboard)
+ device pci 13.0 on end # USB
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "0" # Not available/needed on this board
end
end
- chip cpu/amd/model_gx1
+ chip cpu/amd/model_gx1 # CPU
end
end
diff --git a/src/mainboard/bcom/winnet100/Options.lb b/src/mainboard/bcom/winnet100/Options.lb
index 28b8279c28..16b38c068d 100644
--- a/src/mainboard/bcom/winnet100/Options.lb
+++ b/src/mainboard/bcom/winnet100/Options.lb
@@ -56,6 +56,7 @@ uses CONFIG_CONSOLE_SERIAL8250
uses TTYS0_BAUD
uses TTYS0_BASE
uses TTYS0_LCS
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_UDELAY_TSC
uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
uses CONFIG_VIDEO_MB