summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorDavid Hendricks <dhendrix@chromium.org>2013-01-09 17:42:02 -0800
committerRonald G. Minnich <rminnich@gmail.com>2013-01-10 05:55:46 +0100
commit27094b0afe25caf38e323d5f350be7d89aace366 (patch)
treebf4c57c8e18b066119492b9bec06c41ad142fbc2 /src
parent1d5390ecc85f7d0fc25d1a5cbe62ae6fa1abf5e2 (diff)
exynos5250: un-comment a lot of code which was left out earlier
Turns out initializing power rails is necessary, even for getting serial output. Change-Id: I3042c1001ae43b1e793ee6cb90bb79b8db0f8fd1 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2126 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Diffstat (limited to 'src')
-rw-r--r--src/cpu/samsung/exynos5250/power.c27
1 files changed, 13 insertions, 14 deletions
diff --git a/src/cpu/samsung/exynos5250/power.c b/src/cpu/samsung/exynos5250/power.c
index 7d294ed90f..7c61655676 100644
--- a/src/cpu/samsung/exynos5250/power.c
+++ b/src/cpu/samsung/exynos5250/power.c
@@ -31,6 +31,9 @@
#include <cpu/samsung/exynos5-common/spl.h>
#include <drivers/maxim/max77686/max77686.h>
+#include "device/i2c.h"
+#include "cpu/samsung/s5p-common/s3c24x0_i2c.h"
+
static void ps_hold_setup(void)
{
struct exynos5_power *power =
@@ -138,21 +141,16 @@ int power_init(void)
{
int error = 0;
- /* FIXME(dhendrix): not necessary for initial bringup... */
-#if 0
-#ifdef CONFIG_SPL_BUILD
- struct spl_machine_param *param = spl_get_machine_params();
-
+ /*
+ * FIXME(dhendrix): We will re-factor the caller of power_init()
+ * to start from a board-specific romstage file and do the i2c
+ * early setup. There is no reason CPU power init code should
+ * mess with board-specific i2c parameters.
+ */
/* Set the i2c register address base so i2c works before FDT */
- i2c_set_early_reg(param->i2c_base);
-#endif
-#endif
+ i2c_set_early_reg(0x12c60000);
ps_hold_setup();
-
- /* FIXME(dhendrix): not necessary for initial bringup... */
-#if 0
- /* init the i2c so that we can program pmic chip */
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
/*
@@ -183,9 +181,10 @@ int power_init(void)
REG_ENABLE, MAX77686_MV);
error |= max77686_volsetting(PMIC_LDO10, CONFIG_VDD_LDO10_MV,
REG_ENABLE, MAX77686_MV);
-#endif
- if (error != 0)
+ if (error != 0) {
+ power_shutdown();
printk(BIOS_ERR, "power init failed\n");
+ }
return error;
}