summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorEric Biederman <ebiederm@xmission.com>2003-09-01 23:17:58 +0000
committerEric Biederman <ebiederm@xmission.com>2003-09-01 23:17:58 +0000
commit9bdb460a97e87b11167ef22ec2fb737ecb95aa41 (patch)
treeec82f54e42f3d031d151a9724cec733801543d87 /src
parent0e97fe39048fb9ed22f12dfc9d197de2f0b35631 (diff)
- Updates to config.g so that it works more reliably and has initial support
for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc - Updates to config.g so that it works more reliably and has initial support for paths - Renamed some configuration variables SMP -> CONFIG_SMP MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS - Removed some dead configuration variables MAX_CPUS -> CONFIG_MAX_CPUS MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS SMP -> CONFIG_SMP FINAL_MAINBOARD_FIXUP SIO_BASE SIO_SYSTEM_CLK_INPUT NO_KEYBOARD USE_NORMAL_IMAGE SERIAL_CONSOLE USE_ELF_BOOT ENABLE_FIXED_AND_VARIABLE_MTRRS START_CPU_SEG DISABLE_WATCHDOG ENABLE_IOMMU AMD8111_DEV - Removed some assembly files that are no longer needed killed src/southbridge/amd/amd8111/smbus.inc killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc killed src/ram/ramtest.inc killed src/sdram/generic_dump_spd.inc killed src/sdram/generic_dump_spd.inc - Updated the arima/hdama to build with the new configuration system - Updated config.g to list all of the variables with make echo git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/arch/i386/boot/tables.c2
-rw-r--r--src/arch/i386/include/arch/smp/mpspec.h2
-rw-r--r--src/arch/i386/lib/c_start.S4
-rw-r--r--src/arch/i386/smp/mpspec.c2
-rw-r--r--src/arch/i386/smp/secondary.S4
-rw-r--r--src/arch/i386/smp/start_stop.c11
-rw-r--r--src/boot/hardwaremain.c4
-rw-r--r--src/config/Options.lb123
-rw-r--r--src/config/linuxbios_c.ld2
-rw-r--r--src/include/device/device.h1
-rw-r--r--src/mainboard/amd/quartet/Config.lb35
-rw-r--r--src/mainboard/amd/quartet/auto.c2
-rw-r--r--src/mainboard/amd/quartet/mainboard.c2
-rw-r--r--src/mainboard/amd/solo/Config.lb71
-rw-r--r--src/mainboard/amd/solo/mainboard.c2
-rw-r--r--src/mainboard/arima/hdama/Config.lb370
-rw-r--r--src/mainboard/arima/hdama/auto.c30
-rw-r--r--src/mainboard/arima/hdama/mainboard.c2
-rw-r--r--src/mainboard/newisys/khepri/Config.lb28
-rw-r--r--src/mainboard/newisys/khepri/auto.c2
-rw-r--r--src/mainboard/newisys/khepri/mainboard.c2
-rw-r--r--src/mainboard/tyan/s2880/Config.lb29
-rw-r--r--src/mainboard/tyan/s2880/mainboard.c2
-rw-r--r--src/mainboard/tyan/s2882/Config.lb29
-rw-r--r--src/mainboard/tyan/s2882/mainboard.c2
-rw-r--r--src/mainboard/tyan/s2885/Config.lb29
-rw-r--r--src/mainboard/tyan/s2885/mainboard.c2
-rw-r--r--src/northbridge/amd/amdk8/coherent_ht.c12
-rw-r--r--src/northbridge/amd/amdk8/raminit.c2
29 files changed, 353 insertions, 455 deletions
diff --git a/src/arch/i386/boot/tables.c b/src/arch/i386/boot/tables.c
index 1b840ff379..513167188c 100644
--- a/src/arch/i386/boot/tables.c
+++ b/src/arch/i386/boot/tables.c
@@ -20,7 +20,7 @@ static void remove_logical_cpus(unsigned long *processor_map)
if (disable_logical_cpus) {
/* disable logical cpus */
int cnt;
- for(cnt=MAX_PHYSICAL_CPUS;cnt<MAX_CPUS;cnt++)
+ for(cnt=CONFIG_MAX_PHYSICAL_CPUS;cnt<CONFIG_MAX_CPUS;cnt++)
processor_map[cnt]=0;
printk_debug("logical cpus disabled\n");
}
diff --git a/src/arch/i386/include/arch/smp/mpspec.h b/src/arch/i386/include/arch/smp/mpspec.h
index 96b2ab3e6b..e780593df6 100644
--- a/src/arch/i386/include/arch/smp/mpspec.h
+++ b/src/arch/i386/include/arch/smp/mpspec.h
@@ -268,7 +268,7 @@ void *smp_write_floating_table(unsigned long addr);
unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map);
/* A table (per mainboard) listing the initial apicid of each cpu. */
-extern unsigned long initial_apicid[MAX_CPUS];
+extern unsigned long initial_apicid[CONFIG_MAX_CPUS];
#else /* HAVE_MP_TABLE */
static inline
diff --git a/src/arch/i386/lib/c_start.S b/src/arch/i386/lib/c_start.S
index 4c4146ec83..602fc51cbd 100644
--- a/src/arch/i386/lib/c_start.S
+++ b/src/arch/i386/lib/c_start.S
@@ -45,10 +45,10 @@ _start:
movl APIC_ID(%edi), %eax
shrl $24, %eax
- /* Get the cpu index (MAX_CPUS on error) */
+ /* Get the cpu index (CONFIG_MAX_CPUS on error) */
movl $-4, %ebx
1: addl $4, %ebx
- cmpl $(MAX_CPUS << 2), %ebx
+ cmpl $(CONFIG_MAX_CPUS << 2), %ebx
je 2
cmpl %eax, initial_apicid(%ebx)
jne 1b
diff --git a/src/arch/i386/smp/mpspec.c b/src/arch/i386/smp/mpspec.c
index ff935bb996..d7b8c3e2f0 100644
--- a/src/arch/i386/smp/mpspec.c
+++ b/src/arch/i386/smp/mpspec.c
@@ -108,7 +108,7 @@ void smp_write_processors(struct mp_config_table *mc,
cpuid(1, &eax, &ebx, &ecx, &edx);
cpu_features = eax;
cpu_feature_flags = edx;
- for(i = 0; i < MAX_CPUS; i++) {
+ for(i = 0; i < CONFIG_MAX_CPUS; i++) {
unsigned long cpu_apicid = initial_apicid[i];
unsigned long cpu_flag;
if(initial_apicid[i]==-1)
diff --git a/src/arch/i386/smp/secondary.S b/src/arch/i386/smp/secondary.S
index 78c55764b0..c27d6282b0 100644
--- a/src/arch/i386/smp/secondary.S
+++ b/src/arch/i386/smp/secondary.S
@@ -48,10 +48,10 @@ _secondary_start:
movl (APIC_ID + APIC_DEFAULT_BASE), %edi
shrl $24, %edi
- /* Get the cpu index (MAX_CPUS on error) */
+ /* Get the cpu index (CONFIG_MAX_CPUS on error) */
movl $-4, %ebx
1: addl $4, %ebx
- cmpl $(MAX_CPUS << 2), %ebx
+ cmpl $(CONFIG_MAX_CPUS << 2), %ebx
je 2
cmpl %edi, initial_apicid(%ebx)
jne 1b
diff --git a/src/arch/i386/smp/start_stop.c b/src/arch/i386/smp/start_stop.c
index bb8868a8d9..b40452403c 100644
--- a/src/arch/i386/smp/start_stop.c
+++ b/src/arch/i386/smp/start_stop.c
@@ -5,13 +5,6 @@
#include <string.h>
#include <console/console.h>
-#ifndef START_CPU_SEG
-#define START_CPU_SEG 0x90000
-#endif
-#if (START_CPU_SEG&0xffff) != 0
-#error START_CPU_SEG must be 64k aligned
-#endif
-
static inline void hlt(void)
{
asm("hlt");
@@ -26,7 +19,7 @@ unsigned long this_processors_id(void)
int processor_index(unsigned long apicid)
{
int i;
- for(i = 0; i < MAX_CPUS; i++) {
+ for(i = 0; i < CONFIG_MAX_CPUS; i++) {
if (initial_apicid[i] == apicid) {
return i;
}
@@ -230,7 +223,7 @@ void startup_other_cpus(unsigned long *processor_map)
int i;
/* Assume the cpus are densly packed by apicid */
- for(i = 0; i < MAX_CPUS; i++) {
+ for(i = 0; i < CONFIG_MAX_CPUS; i++) {
unsigned long cpu_apicid = initial_apicid[i];
if (cpu_apicid == -1) {
printk_err("CPU %d not found\n",i);
diff --git a/src/boot/hardwaremain.c b/src/boot/hardwaremain.c
index ff0909fd97..2bff70ce93 100644
--- a/src/boot/hardwaremain.c
+++ b/src/boot/hardwaremain.c
@@ -60,7 +60,7 @@ it with the version available from LANL.
* info per processor at some point. I hope we don't need
* anything more complex than an int.
*/
-static unsigned long processor_map[MAX_CPUS];
+static unsigned long processor_map[CONFIG_MAX_CPUS];
static struct mem_range *get_ramsize(void)
{
@@ -114,7 +114,7 @@ static void wait_for_other_cpus(void)
}
active_count = atomic_read(&active_cpus);
}
- for(i = 0; i < MAX_CPUS; i++) {
+ for(i = 0; i < CONFIG_MAX_CPUS; i++) {
if (!(processor_map[i] & CPU_ENABLED)) {
printk_err("CPU %d did not initialize!\n", i);
processor_map[i] = 0;
diff --git a/src/config/Options.lb b/src/config/Options.lb
index edc19ee7a7..7cec869077 100644
--- a/src/config/Options.lb
+++ b/src/config/Options.lb
@@ -117,7 +117,7 @@ define OBJCOPY
comment "Objcopy command"
end
define LINUXBIOS_VERSION
- default "1.1.0"
+ default "1.1.1"
export always
comment "LinuxBIOS version"
end
@@ -148,7 +148,7 @@ define LINUXBIOS_COMPILE_HOST
end
define LINUXBIOS_COMPILE_DOMAIN
- default ""
+ default "$(shell dnsdomainname)"
export always
comment "Build domain name"
end
@@ -183,16 +183,10 @@ define HAVE_FALLBACK_BOOT
comment "Set if fallback booting required"
end
define USE_FALLBACK_IMAGE
- default 0
+ default 1
export used
comment "Set to build a fallback image"
end
-define USE_NORMAL_IMAGE
- format "%d"
- default {!USE_FALLBACK_IMAGE}
- export used
- comment "Set to build a normal image"
-end
define FALLBACK_SIZE
default 65536
format "0x%x"
@@ -277,16 +271,16 @@ define CACHE_RAM_SIZE
comment "Size of cache when using it for temporary RAM"
end
define XIP_ROM_BASE
- default 0xffff8000
+ default 0
format "0x%x"
export used
- comment "base address of range of ROM that can be cached to speed up linuxBIOS"
+ comment "Start address of area to cache during LinuxBIOS execution directly from ROM"
end
define XIP_ROM_SIZE
- default 0x8000
+ default 0
format "0x%x"
export used
- comment "size of range of ROM that can be cached to speed up linuxBIOS"
+ comment "Size of area to cache during LinuxBIOS execution directly from ROM"
end
define CONFIG_COMPRESS
default 1
@@ -348,14 +342,8 @@ end
define CONFIG_CONSOLE_SERIAL8250
default 0
export always
- comment "Log messages to serial 8250 console"
+ comment "Log messages to 8250 uart based serial console"
end
-define SERIAL_CONSOLE
- default none
- export used
- comment "Log messages to serial console"
-end
-
define DEFAULT_CONSOLE_LOGLEVEL
default 7
export always
@@ -373,17 +361,25 @@ define NO_POST
export always
comment "Disable POST codes"
end
+
+define TTYS0_BASE
+ default 0x3f8
+ export always
+ comment "Base address for 8250 uart for the serial console"
+end
+
define TTYS0_BAUD
default 115200
export always
comment "Default baud rate for serial console"
end
-define NO_KEYBOARD
- default none
- export never
- comment "Set if we don't have a keyboard"
-end
+define TTYS0_LCS
+ default 0x3
+ export always
+ comment "Default flow control settings for the 8250 serial console uart"
+end
+
###############################################
# Mainboard options
###############################################
@@ -403,11 +399,6 @@ define MAINBOARD_VENDOR
export always
comment "Vendor of mainboard"
end
-define FINAL_MAINBOARD_FIXUP
- default 0
- export used
- comment "Do final mainboard fixups"
-end
define CONFIG_SYS_CLK_FREQ
default none
export used
@@ -426,22 +417,17 @@ end
define CONFIG_MAX_CPUS
default 1
export always
- comment "Config CPU count for this machine"
+ comment "Maximum CPU count for this machine"
end
-define MAX_CPUS
- default 1
+define CONFIG_MAX_PHYSICAL_CPUS
+ default {CONFIG_MAX_CPUS}
export always
- comment "CPU count for this machine"
+ comment "Physical CPU count for this machine"
end
define CONFIG_LOGICAL_CPUS
- default 1
- export always
- comment "Logical CPU count for this machine"
-end
-define MAX_PHYSICAL_CPUS
- default 1
+ default 0
export always
- comment "Physical CPU count for this machine"
+ comment "Should multiple cpus per die be enabled?"
end
define HAVE_MP_TABLE
default none
@@ -453,11 +439,6 @@ end
# Boot options
###############################################
-define USE_ELF_BOOT
- default none
- export always
- comment "Use ELF boot loader"
-end
define CONFIG_IDE_STREAM
default 0
export always
@@ -541,21 +522,6 @@ define SMBUS_MEM_DEVICE_INC
end
###############################################
-# SuperIO options
-###############################################
-
-define SIO_BASE
- default none
- export used
- comment "Superio base address"
-end
-define SIO_SYSTEM_CLK_INPUT
- default none
- export used
- comment "Superio CLK input default"
-end
-
-###############################################
# Misc options
###############################################
@@ -569,57 +535,30 @@ define MEMORY_HOLE
export used
comment "Set to deal with memory hole"
end
-define ENABLE_FIXED_AND_VARIABLE_MTRRS
- default none
- export used
- comment "Enable fixed and variable mtrrs"
-end
-define START_CPU_SEG
- default 0xf0000
- format "0x%x"
- export always
- comment "Start CPU segment"
-end
define MAX_REBOOT_CNT
- default 2
+ default 3
export always
comment "Set maximum reboots"
end
-define DISABLE_WATCHDOG
- default {MAXIMUM_CONSOLE_LOGLEVEL >= 8}
- export used
- comment "Disable watchdog if we're doing lots of output"
-end
-define ENABLE_IOMMU
- default 1
- export used
- comment "Enable IOMMU aperture"
-end
###############################################
# Misc device options
###############################################
define CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
- default none
+ default 0
export used
- comment ""
+ comment "Use timer2 to callibrate the x86 time stamp counter"
end
define INTEL_PPRO_MTRR
default none
export always
comment ""
end
-define AMD8111_DEV
- default 0x3800
- format "0x%x"
- export used
- comment ""
-end
define CONFIG_UDELAY_TSC
default 0
export used
- comment ""
+ comment "Implement udelay with the x86 time stamp counter"
end
###############################################
diff --git a/src/config/linuxbios_c.ld b/src/config/linuxbios_c.ld
index 4340f1a135..c05a4c995e 100644
--- a/src/config/linuxbios_c.ld
+++ b/src/config/linuxbios_c.ld
@@ -87,7 +87,7 @@ SECTIONS
_stack = .;
.stack . : {
/* Reserve a stack for each possible cpu, +1 extra */
- . = ((MAX_CPUS * STACK_SIZE) + STACK_SIZE) ;
+ . = ((CONFIG_MAX_CPUS * STACK_SIZE) + STACK_SIZE) ;
}
_estack = .;
_heap = .;
diff --git a/src/include/device/device.h b/src/include/device/device.h
index d5013f15da..21e5dfc5c8 100644
--- a/src/include/device/device.h
+++ b/src/include/device/device.h
@@ -1,6 +1,7 @@
#ifndef DEVICE_H
#define DEVICE_H
+#include <stdint.h>
#include <device/resource.h>
struct device;
diff --git a/src/mainboard/amd/quartet/Config.lb b/src/mainboard/amd/quartet/Config.lb
index 97634ab25a..b6d65b4cb5 100644
--- a/src/mainboard/amd/quartet/Config.lb
+++ b/src/mainboard/amd/quartet/Config.lb
@@ -1,8 +1,6 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses ENABLE_IOMMU
#
#
###
@@ -34,15 +32,11 @@ ldscript /cpu/i386/entry32.lds
### Build our reset vector (This is where linuxBIOS is entered)
###
if USE_FALLBACK_IMAGE
- mainboardinit cpu/i386/reset16.inc
- ldscript /cpu/i386/reset16.lds
+ mainboardinit cpu/i386/reset16.inc
+ ldscript /cpu/i386/reset16.lds
else
- print "NO FALLBACK USED!"
-end
-
-if USE_NORMAL_IMAGE
- mainboardinit cpu/i386/reset32.inc
- ldscript /cpu/i386/reset32.lds
+ mainboardinit cpu/i386/reset32.inc
+ ldscript /cpu/i386/reset32.lds
end
#
#### Should this be in the northbridge code?
@@ -76,15 +70,6 @@ end
mainboardinit cpu/k8/earlymtrr.inc
#
#
-###
-### Only the bootstrap cpu makes it here.
-### Failover if we need to
-###
-#
-if USE_FALLBACK_IMAGE
- mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc
-end
-#
####
#### O.k. We aren't just an intermediary anymore!
####
@@ -94,10 +79,6 @@ end
###
##option MAXIMUM_CONSOLE_LOGLEVEL=7
#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8)
-#if DISABLE_WATCHDOG
-# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc
-#end
#
if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end
#
@@ -118,13 +99,6 @@ end
mainboardinit ./auto.inc
#
###
-### Setup RAM
-###
-mainboardinit ram/ramtest.inc
-mainboardinit southbridge/amd/amd8111/smbus.inc
-mainboardinit sdram/generic_dump_spd.inc
-#
-###
### Include the secondary Configuration files
###
northbridge amd/amdk8
@@ -142,4 +116,3 @@ cpu p6 end
cpu k7 end
cpu k8 end
-option ENABLE_IOMMU=1
diff --git a/src/mainboard/amd/quartet/auto.c b/src/mainboard/amd/quartet/auto.c
index a347f20b70..3166f7ad3c 100644
--- a/src/mainboard/amd/quartet/auto.c
+++ b/src/mainboard/amd/quartet/auto.c
@@ -17,6 +17,8 @@
#include "northbridge/amd/amdk8/reset_test.c"
#include "debug.c"
+#define SIO_BASE 0x2e
+
static void memreset_setup(void)
{
/* Set the memreset low */
diff --git a/src/mainboard/amd/quartet/mainboard.c b/src/mainboard/amd/quartet/mainboard.c
index d93d2ed1d9..0622150d64 100644
--- a/src/mainboard/amd/quartet/mainboard.c
+++ b/src/mainboard/amd/quartet/mainboard.c
@@ -5,7 +5,7 @@
#include <device/pci_ops.h>
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
{
0, 1, 2, 3
};
diff --git a/src/mainboard/amd/solo/Config.lb b/src/mainboard/amd/solo/Config.lb
index f237a5cbea..12c59fdb38 100644
--- a/src/mainboard/amd/solo/Config.lb
+++ b/src/mainboard/amd/solo/Config.lb
@@ -24,8 +24,6 @@ default CONFIG_UDELAY_TSC=0
###
### Customize our winbond superio chip for this motherboard
###
-option SIO_BASE=0x2e
-option SIO_SYSTEM_CLK_INPUT=0
option CONFIG_CONSOLE_SERIAL8250=0
#
###
@@ -51,16 +49,11 @@ option IRQ_SLOT_COUNT=7
##option HAVE_MP_TABLE=1
#
###
-### Do not build special code for the keyboard
-###
-default NO_KEYBOARD=1
-#
-###
### Build code for SMP support
### Only worry about 2 micro processors
###
##option CONFIG_SMP=1
-option MAX_CPUS=1
+option CONFIG_MAX_CPUS=1
#
###
### Build code to setup a generic IOAPIC
@@ -79,37 +72,17 @@ option CONFIG_IOAPIC=1
option MEMORY_HOLE=0
#
###
-### Enable both fixed and variable MTRRS
-### When we setup MTRRs in mtrr.c
-###
-### We must setup the fixed mtrrs or we confuse SMP secondary
-### processor identification
-###
-option ENABLE_FIXED_AND_VARIABLE_MTRRS=1
-#
-###
### Clean up the motherboard id strings
###
option MAINBOARD_PART_NUMBER="Solo7"
option MAINBOARD_VENDOR="AMD"
#
###
-### Let Assembly code know where on the pci bus the AMD southbridge is
-###
-option AMD8111_DEV=0x3800
-#
-###
-### Call the final_mainboard_fixup function
-###
-option FINAL_MAINBOARD_FIXUP=1
-#
-###
### Figure out which type of linuxBIOS image to build
### If we aren't a fallback image we must be a normal image
### This is useful for optional includes
###
default USE_FALLBACK_IMAGE=0
-option USE_NORMAL_IMAGE=(! USE_FALLBACK_IMAGE)
#
####
#### LinuxBIOS layout values
@@ -144,8 +117,7 @@ default FALLBACK_SIZE=65536
if USE_FALLBACK_IMAGE
option ROM_SECTION_SIZE = FALLBACK_SIZE
option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-end
-if USE_NORMAL_IMAGE
+else
option ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE)
option ROM_SECTION_OFFSET= 0
end
@@ -177,13 +149,6 @@ option _ROMBASE = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
##option XIP_ROM_BASE=0xffff8000
#
###
-### Compute where the SMP startup code needs to live
-### FIXME I don't see how to make this work for the normal image....
-###
-option START_CPU_SEG=0xf0000
-#
-#
-###
### Set all of the defaults for an x86 architecture
###
#
@@ -217,13 +182,11 @@ ldscript /cpu/i386/entry32.lds
### Build our reset vector (This is where linuxBIOS is entered)
###
if USE_FALLBACK_IMAGE
- mainboardinit cpu/i386/reset16.inc
- ldscript /cpu/i386/reset16.lds
-end
-
-if USE_NORMAL_IMAGE
- mainboardinit cpu/i386/reset32.inc
- ldscript /cpu/i386/reset32.lds
+ mainboardinit cpu/i386/reset16.inc
+ ldscript /cpu/i386/reset16.lds
+else
+ mainboardinit cpu/i386/reset32.inc
+ ldscript /cpu/i386/reset32.lds
end
#
#### Should this be in the northbridge code?
@@ -251,15 +214,6 @@ end
mainboardinit cpu/k8/earlymtrr.inc
#
#
-###
-### Only the bootstrap cpu makes it here.
-### Failover if we need to
-###
-#
-if USE_FALLBACK_IMAGE
- mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc
-end
-#
####
#### O.k. We aren't just an intermediary anymore!
####
@@ -269,10 +223,6 @@ end
###
##option MAXIMUM_CONSOLE_LOGLEVEL=7
#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8)
-#if DISABLE_WATCHDOG
-# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc
-#end
#
###
### Setup the serial port
@@ -293,13 +243,6 @@ makerule ./auto.inc dep "./romcc ./auto.E" act "./romcc -O ./auto.E > auto.inc"
mainboardinit ./auto.inc
#
###
-### Setup RAM
-###
-mainboardinit ram/ramtest.inc
-mainboardinit southbridge/amd/amd8111/smbus.inc
-mainboardinit sdram/generic_dump_spd.inc
-#
-###
### Include the secondary Configuration files
###
northbridge amd/amdk8
diff --git a/src/mainboard/amd/solo/mainboard.c b/src/mainboard/amd/solo/mainboard.c
index 5690bd5afd..75a77d6adb 100644
--- a/src/mainboard/amd/solo/mainboard.c
+++ b/src/mainboard/amd/solo/mainboard.c
@@ -5,7 +5,7 @@
#include <device/pci_ops.h>
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
{
0
};
diff --git a/src/mainboard/arima/hdama/Config.lb b/src/mainboard/arima/hdama/Config.lb
index db31552135..4947698590 100644
--- a/src/mainboard/arima/hdama/Config.lb
+++ b/src/mainboard/arima/hdama/Config.lb
@@ -1,168 +1,286 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses AMD8111_DEV
uses MAINBOARD
uses ARCH
-uses ENABLE_IOMMU
-#
-#
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+
###
-### Set all of the defaults for an x86 architecture
+### Build options
###
-#
-#
+
+##
+## Build code for the fallback boot
+##
+option HAVE_FALLBACK_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+option HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+option HAVE_PIRQ_TABLE=1
+option IRQ_SLOT_COUNT=7
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+option HAVE_MP_TABLE=1
+
+##
+## Build code to export a CMOS option table
+##
+option HAVE_OPTION_TABLE=1
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+option CONFIG_SMP=1
+option CONFIG_MAX_CPUS=2
+
+##
+## Build code to setup a generic IOAPIC
+##
+option CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+option MAINBOARD_PART_NUMBER="HDAMA"
+option MAINBOARD_VENDOR="ARIMA"
+
###
-### Build the objects we have code for in this directory.
+### LinuxBIOS layout values
###
-##object mainboard.o
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+option ROM_SIZE = 524288
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+option ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+option STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+option HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+option USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+ option ROM_SECTION_SIZE = FALLBACK_SIZE
+ option ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+ option ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ option ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+option PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+option CONFIG_ROM_STREAM = 1
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+option _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+option XIP_ROM_SIZE=65536
+option XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+#cpu k8 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+#object mainboard.o
driver mainboard.o
-object static_devices.o
+#object static_devices.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-#
-arch i386 end
-#cpu k8 end
-#
-###
-### Build our 16 bit and 32 bit linuxBIOS entry code
-###
+object reset.o
+
+##
+## Romcc output
+##
+makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c"
+ action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
+end
+
+makerule ./failover.inc
+ depends "./failover.E ./romcc"
+ action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
+end
+
+makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c"
+ action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+end
+makerule ./auto.inc
+ depends "./auto.E ./romcc"
+ action "./romcc -mcpu=k8 -O ./auto.E > auto.inc"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
mainboardinit cpu/i386/entry16.inc
mainboardinit cpu/i386/entry32.inc
ldscript /cpu/i386/entry16.lds
ldscript /cpu/i386/entry32.lds
-#
-###
-### Build our reset vector (This is where linuxBIOS is entered)
-###
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
if USE_FALLBACK_IMAGE
- mainboardinit cpu/i386/reset16.inc
- ldscript /cpu/i386/reset16.lds
+ mainboardinit cpu/i386/reset16.inc
+ ldscript /cpu/i386/reset16.lds
else
- print "NO FALLBACK USED!"
+ mainboardinit cpu/i386/reset32.inc
+ ldscript /cpu/i386/reset32.lds
end
-if USE_NORMAL_IMAGE
- mainboardinit cpu/i386/reset32.inc
- ldscript /cpu/i386/reset32.lds
-end
-#
-#### Should this be in the northbridge code?
+### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
-#
-###
-### Include an id string (For safe flashing)
-###
+
+##
+## Include an id string (For safe flashing)
+##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-#
-####
-#### This is the early phase of linuxBIOS startup
-#### Things are delicate and we test to see if we should
-#### failover to another image.
-####
-#option MAX_REBOOT_CNT=2
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-#
-###
-### Setup our mtrrs
-###
+
+##
+## Setup our mtrrs
+##
mainboardinit cpu/k8/earlymtrr.inc
+
###
-### Only the bootstrap cpu makes it here.
-### Failover if we need to
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
###
-#
if USE_FALLBACK_IMAGE
- mainboardinit ./failover.inc
-# mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc
+ ldscript /arch/i386/lib/failover.lds
+ mainboardinit ./failover.inc
end
-#
-#
-###
-### Setup the serial port
-###
-#mainboardinit superiowinbond/w83627hf/setup_serial.inc
-mainboardinit pc80/serial.inc
-mainboardinit arch/i386/lib/console.inc
-#
-####
-#### O.k. We aren't just an intermediary anymore!
-####
-#
-###
-### When debugging disable the watchdog timer
###
-##option MAXIMUM_CONSOLE_LOGLEVEL=7
-#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8)
-#if DISABLE_WATCHDOG
-# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc
-#end
-#
-#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end
-#
+### O.k. We aren't just an intermediary anymore!
###
-### Romcc output
-###
-#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E"
-#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc"
-#mainboardinit .failover.inc
-
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c"
- action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
-end
-makerule ./failover.inc
- depends "./romcc ./failover.E"
- action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c"
- action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
-end
-makerule ./auto.inc
- depends "./romcc ./auto.E"
- action "./romcc -mcpu=k8 -O ./auto.E > auto.inc"
-end
+##
+## Setup RAM
+##
mainboardinit cpu/k8/enable_mmx_sse.inc
mainboardinit ./auto.inc
mainboardinit cpu/k8/disable_mmx_sse.inc
-#
-###
-### Setup RAM
-###
-#mainboardinit ram/ramtest.inc
-#mainboardinit southbridge/amd/amd8111/smbus.inc
-#mainboardinit sdram/generic_dump_spd.inc
-#
-###
-### Include the secondary Configuration files
-###
-northbridge amd/amdk8
-end
-southbridge amd/amd8111 "amd8111"
-end
-southbridge amd/amd8131 "amd8131"
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+
+northbridge amd/amdk8 "mc0"
+ #pci 0:18.0
+ #pci 0:18.0
+ #pci 0:18.0
+ #pci 0:18.1
+ #pci 0:18.2
+ #pci 0:18.3
+ southbridge amd/amd8131 "amd8131"
+ #pci 0:0.0
+ #pci 0:0.1
+ #pci 0:1.0
+ #pci 0:1.1
+ end
+ southbridge amd/amd8111 "amd8111"
+ #pci 0:0.0
+ #pci 0:1.0
+ #pci 0:1.1
+ #pci 0:1.2
+ #pci 0:1.3
+ #pci 0:1.5 off
+ #pci 0:1.6 off
+ superio NSC/pc87360
+ #pnp 1:2e.0
+ #pnp 1:2e.1
+ #pnp 1:2e.2
+ #pnp 1:2e.3
+ #pnp 1:2e.4
+ #pnp 1:2e.5
+ #pnp 1:2e.6
+ #pnp 1:2e.7
+ #pnp 1:2e.8
+ #pnp 1:2e.9
+ #pnp 1:2e.a
+ register "com1" = "{1, 0, 0x3f8, 4}"
+ register "lpt" = "{1}"
+ end
+ end
end
-#mainboardinit archi386/smp/secondary.inc
-superio NSC/pc87360
- register "com1" = "{1}"
- register "lpt" = "{1}"
+
+northbridge amd/amdk8 "mc1"
+ #pci 0:19.0
+ #pci 0:19.0
+ #pci 0:19.0
+ #pci 0:19.1
+ #pci 0:19.2
+ #pci 0:19.3
end
-dir /pc80
-##dir /src/superio/winbond/w83627hf
-#dir /cpu/k8
-cpu k8 "cpu0"
- register "up" = "{.chip = &amd8111, .ht_width=8, .ht_speed=200}"
+
+cpu k8 "cpu0"
+ register "up" = "{ .chip = &amd8131, .ht_width=16, .ht_speed=600 }"
end
cpu k8 "cpu1"
end
-option ENABLE_IOMMU=1
+##
+## Include the old serial code for those few places that still need it.
+##
+mainboardinit pc80/serial.inc
+mainboardinit arch/i386/lib/console.inc
+
diff --git a/src/mainboard/arima/hdama/auto.c b/src/mainboard/arima/hdama/auto.c
index ca19245293..f977496a7b 100644
--- a/src/mainboard/arima/hdama/auto.c
+++ b/src/mainboard/arima/hdama/auto.c
@@ -1,6 +1,4 @@
#define ASSEMBLY 1
-#define MAXIMUM_CONSOLE_LOGLEVEL 9
-#define DEFAULT_CONSOLE_LOGLEVEL 9
#include <stdint.h>
#include <device/pci_def.h>
@@ -20,6 +18,8 @@
#include "northbridge/amd/amdk8/reset_test.c"
#include "debug.c"
+#define SIO_BASE 0x2e
+
static void memreset_setup(void)
{
/* Set the memreset low */
@@ -151,7 +151,7 @@ static void pc87360_enable_serial(void)
}
#define FIRST_CPU 1
-#define SECOND_CPU 0
+#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
static void main(void)
{
@@ -209,7 +209,7 @@ static void main(void)
memreset_setup();
sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
-#if 1
+#if 0
dump_pci_devices();
#endif
#if 0
@@ -227,13 +227,21 @@ static void main(void)
#endif
#if 0
ram_check(0x00000000, msr.lo);
-#else
-#if TOTAL_CPUS < 2
- /* Check 16MB of memory @ 0*/
- ram_check(0x00000000, 0x01000);
-#else
- /* Check 16MB of memory @ 2GB */
- ram_check(0x80000000, 0x81000000);
#endif
+#if 0
+ static const struct {
+ unsigned long lo, hi;
+ } check_addrs[] = {
+ /* Check 16MB of memory @ 0*/
+ { 0x00000000, 0x01000000 },
+#if TOTAL_CPUS > 1
+ /* Check 16MB of memory @ 2GB */
+ { 0x80000000, 0x81000000 },
+#endif
+ };
+ int i;
+ for(i = 0; i < sizeof(check_addrs)/sizeof(check_addrs[0]); i++) {
+ ram_check(check_addrs[i].lo, check_addrs[i].hi);
+ }
#endif
}
diff --git a/src/mainboard/arima/hdama/mainboard.c b/src/mainboard/arima/hdama/mainboard.c
index 61092b799b..4f40e393b2 100644
--- a/src/mainboard/arima/hdama/mainboard.c
+++ b/src/mainboard/arima/hdama/mainboard.c
@@ -9,7 +9,7 @@
#include "chip.h"
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
{
0, 1,
};
diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb
index db31552135..2050b01367 100644
--- a/src/mainboard/newisys/khepri/Config.lb
+++ b/src/mainboard/newisys/khepri/Config.lb
@@ -1,11 +1,8 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses AMD8111_DEV
uses MAINBOARD
uses ARCH
-uses ENABLE_IOMMU
#
#
###
@@ -37,15 +34,11 @@ ldscript /cpu/i386/entry32.lds
### Build our reset vector (This is where linuxBIOS is entered)
###
if USE_FALLBACK_IMAGE
- mainboardinit cpu/i386/reset16.inc
- ldscript /cpu/i386/reset16.lds
+ mainboardinit cpu/i386/reset16.inc
+ ldscript /cpu/i386/reset16.lds
else
- print "NO FALLBACK USED!"
-end
-
-if USE_NORMAL_IMAGE
- mainboardinit cpu/i386/reset32.inc
- ldscript /cpu/i386/reset32.lds
+ mainboardinit cpu/i386/reset32.inc
+ ldscript /cpu/i386/reset32.lds
end
#
#### Should this be in the northbridge code?
@@ -78,7 +71,6 @@ mainboardinit cpu/k8/earlymtrr.inc
#
if USE_FALLBACK_IMAGE
mainboardinit ./failover.inc
-# mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc
end
#
@@ -99,10 +91,6 @@ mainboardinit arch/i386/lib/console.inc
###
##option MAXIMUM_CONSOLE_LOGLEVEL=7
#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8)
-#if DISABLE_WATCHDOG
-# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc
-#end
#
#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end
#
@@ -135,13 +123,6 @@ mainboardinit ./auto.inc
mainboardinit cpu/k8/disable_mmx_sse.inc
#
###
-### Setup RAM
-###
-#mainboardinit ram/ramtest.inc
-#mainboardinit southbridge/amd/amd8111/smbus.inc
-#mainboardinit sdram/generic_dump_spd.inc
-#
-###
### Include the secondary Configuration files
###
northbridge amd/amdk8
@@ -165,4 +146,3 @@ end
cpu k8 "cpu1"
end
-option ENABLE_IOMMU=1
diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c
index ca19245293..29da7aa5e3 100644
--- a/src/mainboard/newisys/khepri/auto.c
+++ b/src/mainboard/newisys/khepri/auto.c
@@ -20,6 +20,8 @@
#include "northbridge/amd/amdk8/reset_test.c"
#include "debug.c"
+#define SIO_BASE 0x2e
+
static void memreset_setup(void)
{
/* Set the memreset low */
diff --git a/src/mainboard/newisys/khepri/mainboard.c b/src/mainboard/newisys/khepri/mainboard.c
index 9e5c0acc89..88c5977cbb 100644
--- a/src/mainboard/newisys/khepri/mainboard.c
+++ b/src/mainboard/newisys/khepri/mainboard.c
@@ -9,7 +9,7 @@
#include "chip.h"
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
{
0, 1,
};
diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb
index 9c9953e927..1661015535 100644
--- a/src/mainboard/tyan/s2880/Config.lb
+++ b/src/mainboard/tyan/s2880/Config.lb
@@ -1,11 +1,8 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses AMD8111_DEV
uses MAINBOARD
uses ARCH
-uses ENABLE_IOMMU
#
#
###
@@ -46,15 +43,11 @@ ldscript /cpu/i386/entry32.lds
### Build our reset vector (This is where linuxBIOS is entered)
###
if USE_FALLBACK_IMAGE
- mainboardinit cpu/i386/reset16.inc
- ldscript /cpu/i386/reset16.lds
+ mainboardinit cpu/i386/reset16.inc
+ ldscript /cpu/i386/reset16.lds
else
-# print "NO FALLBACK USED!"
-end
-
-if USE_NORMAL_IMAGE
- mainboardinit cpu/i386/reset32.inc
- ldscript /cpu/i386/reset32.lds
+ mainboardinit cpu/i386/reset32.inc
+ ldscript /cpu/i386/reset32.lds
end
#
#### Should this be in the northbridge code?
@@ -87,7 +80,6 @@ mainboardinit cpu/k8/earlymtrr.inc
#
if USE_FALLBACK_IMAGE
mainboardinit ./failover.inc
-# mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc
end
#
@@ -108,10 +100,6 @@ mainboardinit arch/i386/lib/console.inc
###
##option MAXIMUM_CONSOLE_LOGLEVEL=7
#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8)
-#if DISABLE_WATCHDOG
-# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc
-#end
#
#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end
#
@@ -145,13 +133,6 @@ mainboardinit ./auto.inc
mainboardinit cpu/k8/disable_mmx_sse.inc
#
###
-### Setup RAM
-###
-#mainboardinit ram/ramtest.inc
-#mainboardinit southbridge/amd/amd8111/smbus.inc
-#mainboardinit sdram/generic_dump_spd.inc
-#
-###
### Include the secondary Configuration files
###
northbridge amd/amdk8
@@ -175,5 +156,3 @@ end
cpu k8 "cpu1"
end
-
-option ENABLE_IOMMU=1
diff --git a/src/mainboard/tyan/s2880/mainboard.c b/src/mainboard/tyan/s2880/mainboard.c
index 8efc0a5d1b..f6daa781eb 100644
--- a/src/mainboard/tyan/s2880/mainboard.c
+++ b/src/mainboard/tyan/s2880/mainboard.c
@@ -7,7 +7,7 @@
#include "chip.h"
//#include <part/mainboard.h>
//#include "lsi_scsi.c"
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
{
0,1
};
diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb
index 8297ecff7d..013e968656 100644
--- a/src/mainboard/tyan/s2882/Config.lb
+++ b/src/mainboard/tyan/s2882/Config.lb
@@ -1,11 +1,8 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses AMD8111_DEV
uses MAINBOARD
uses ARCH
-uses ENABLE_IOMMU
#
#
###
@@ -45,15 +42,11 @@ ldscript /cpu/i386/entry32.lds
### Build our reset vector (This is where linuxBIOS is entered)
###
if USE_FALLBACK_IMAGE
- mainboardinit cpu/i386/reset16.inc
- ldscript /cpu/i386/reset16.lds
+ mainboardinit cpu/i386/reset16.inc
+ ldscript /cpu/i386/reset16.lds
else
-# print "NO FALLBACK USED!"
-end
-
-if USE_NORMAL_IMAGE
- mainboardinit cpu/i386/reset32.inc
- ldscript /cpu/i386/reset32.lds
+ mainboardinit cpu/i386/reset32.inc
+ ldscript /cpu/i386/reset32.lds
end
#
#### Should this be in the northbridge code?
@@ -86,7 +79,6 @@ mainboardinit cpu/k8/earlymtrr.inc
#
if USE_FALLBACK_IMAGE
mainboardinit ./failover.inc
-# mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc
end
#
@@ -107,10 +99,6 @@ mainboardinit arch/i386/lib/console.inc
###
##option MAXIMUM_CONSOLE_LOGLEVEL=7
#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8)
-#if DISABLE_WATCHDOG
-# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc
-#end
#
#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end
#
@@ -144,13 +132,6 @@ mainboardinit ./auto.inc
mainboardinit cpu/k8/disable_mmx_sse.inc
#
###
-### Setup RAM
-###
-#mainboardinit ram/ramtest.inc
-#mainboardinit southbridge/amd/amd8111/smbus.inc
-#mainboardinit sdram/generic_dump_spd.inc
-#
-###
### Include the secondary Configuration files
###
northbridge amd/amdk8
@@ -174,5 +155,3 @@ end
cpu k8 "cpu1"
end
-
-option ENABLE_IOMMU=1
diff --git a/src/mainboard/tyan/s2882/mainboard.c b/src/mainboard/tyan/s2882/mainboard.c
index 0862c87ac0..d9acaf2384 100644
--- a/src/mainboard/tyan/s2882/mainboard.c
+++ b/src/mainboard/tyan/s2882/mainboard.c
@@ -7,7 +7,7 @@
#include "chip.h"
//#include <part/mainboard.h>
//#include "lsi_scsi.c"
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
{
0,1
};
diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
index 81a72f728f..f3f3081591 100644
--- a/src/mainboard/tyan/s2885/Config.lb
+++ b/src/mainboard/tyan/s2885/Config.lb
@@ -1,11 +1,8 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses AMD8111_DEV
uses MAINBOARD
uses ARCH
-uses ENABLE_IOMMU
#
#
###
@@ -46,15 +43,11 @@ ldscript /cpu/i386/entry32.lds
### Build our reset vector (This is where linuxBIOS is entered)
###
if USE_FALLBACK_IMAGE
- mainboardinit cpu/i386/reset16.inc
- ldscript /cpu/i386/reset16.lds
+ mainboardinit cpu/i386/reset16.inc
+ ldscript /cpu/i386/reset16.lds
else
-# print "NO FALLBACK USED!"
-end
-
-if USE_NORMAL_IMAGE
- mainboardinit cpu/i386/reset32.inc
- ldscript /cpu/i386/reset32.lds
+ mainboardinit cpu/i386/reset32.inc
+ ldscript /cpu/i386/reset32.lds
end
#
#### Should this be in the northbridge code?
@@ -87,7 +80,6 @@ mainboardinit cpu/k8/earlymtrr.inc
#
if USE_FALLBACK_IMAGE
mainboardinit ./failover.inc
-# mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc
end
#
@@ -108,10 +100,6 @@ mainboardinit arch/i386/lib/console.inc
###
##option MAXIMUM_CONSOLE_LOGLEVEL=7
#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8)
-#if DISABLE_WATCHDOG
-# mainboardinit southbridgeamd/amd8111/disable_watchdog.inc
-#end
#
#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end
#
@@ -145,13 +133,6 @@ mainboardinit ./auto.inc
mainboardinit cpu/k8/disable_mmx_sse.inc
#
###
-### Setup RAM
-###
-#mainboardinit ram/ramtest.inc
-#mainboardinit southbridge/amd/amd8111/smbus.inc
-#mainboardinit sdram/generic_dump_spd.inc
-#
-###
### Include the secondary Configuration files
###
northbridge amd/amdk8
@@ -178,5 +159,3 @@ end
cpu k8 "cpu1"
end
-option ENABLE_IOMMU=0
-
diff --git a/src/mainboard/tyan/s2885/mainboard.c b/src/mainboard/tyan/s2885/mainboard.c
index af8c1ad479..524cb80ab2 100644
--- a/src/mainboard/tyan/s2885/mainboard.c
+++ b/src/mainboard/tyan/s2885/mainboard.c
@@ -7,7 +7,7 @@
#include "chip.h"
//#include <part/mainboard.h>
//#include "lsi_scsi.c"
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
{
0,1
};
diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c
index baf3781bf5..5eb127c402 100644
--- a/src/northbridge/amd/amdk8/coherent_ht.c
+++ b/src/northbridge/amd/amdk8/coherent_ht.c
@@ -157,7 +157,7 @@ static void enable_routing(u8 node)
print_debug(" done.\r\n");
}
-#if MAX_CPUS > 1
+#if CONFIG_MAX_CPUS > 1
static void rename_temp_node(u8 node)
{
@@ -290,7 +290,7 @@ static void setup_remote_node(u8 node, u8 cpus)
#endif
-#if MAX_CPUS > 2
+#if CONFIG_MAX_CPUS > 2
static void setup_temp_node(u8 node, u8 cpus)
{
u8 row;
@@ -306,7 +306,7 @@ static u8 setup_uniprocessor(void)
return 1;
}
-#if MAX_CPUS > 1
+#if CONFIG_MAX_CPUS > 1
static u8 setup_smp(void)
{
u8 cpus=2;
@@ -332,7 +332,7 @@ static u8 setup_smp(void)
clear_temp_row(0); /* delete temporary connection */
-#if MAX_CPUS > 2
+#if CONFIG_MAX_CPUS > 2
cpus=4;
/* Setup and check temporary connection from Node 0 to Node 2 */
@@ -386,7 +386,7 @@ static u8 setup_smp(void)
}
#endif
-#if MAX_CPUS > 1
+#if CONFIG_MAX_CPUS > 1
static unsigned detect_mp_capabilities(unsigned cpus)
{
unsigned node, row, mask;
@@ -479,7 +479,7 @@ static int setup_coherent_ht_domain(void)
enable_bsp_routing();
-#if MAX_CPUS == 1
+#if CONFIG_MAX_CPUS == 1
cpus=setup_uniprocessor();
#else
cpus=setup_smp();
diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c
index 99318aa3f7..802e4318b4 100644
--- a/src/northbridge/amd/amdk8/raminit.c
+++ b/src/northbridge/amd/amdk8/raminit.c
@@ -1,6 +1,8 @@
#include <cpu/k8/mtrr.h>
#include "raminit.h"
+#define ENABLE_IOMMU 1
+
/* Function 2 */
#define DRAM_CSBASE 0x40
#define DRAM_CSMASK 0x60