summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorEric Biederman <ebiederm@xmission.com>2003-06-17 08:42:17 +0000
committerEric Biederman <ebiederm@xmission.com>2003-06-17 08:42:17 +0000
commit8d9c123812492a80a43112c8dd217fcfb3cee2c5 (patch)
tree0bc841279e289f958d85cc8f2873b42770ecbce1 /src
parentf96a810f11681ba436b446e9451e02cffcd525f5 (diff)
- Minor mod to reset16.inc to work with newer binutils hopefully this works with older ones...
- Update apic.h to include the APIC_TASK_PRI register definition - Update mptable.c to have a reasonable board OEM and productid - Additional testfiles for romcc. - Split out auto.c and early failover.c moving their generic bits elsewere - Enable cache of the rom - Fixes to amd8111_lpc.c so that we successfully setup virtual wire mode on the ioapic git-svn-id: svn://svn.coreboot.org/coreboot/trunk@880 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/arch/i386/lib/cpu.c8
-rw-r--r--src/cpu/i386/reset16.inc2
-rw-r--r--src/cpu/k8/earlymtrr.inc2
-rw-r--r--src/include/cpu/p6/apic.h2
-rw-r--r--src/mainboard/amd/solo/auto.c29
-rw-r--r--src/mainboard/amd/solo/mptable.c4
-rw-r--r--src/northbridge/amd/amdk8/coherent_ht.c281
-rw-r--r--src/northbridge/amd/amdk8/raminit.c434
-rw-r--r--src/pc80/mc146818rtc_early.c7
-rw-r--r--src/ram/ramtest.c26
-rw-r--r--src/southbridge/amd/amd8111/amd8111_lpc.c62
11 files changed, 503 insertions, 354 deletions
diff --git a/src/arch/i386/lib/cpu.c b/src/arch/i386/lib/cpu.c
index 8ace3fbf53..19020fee55 100644
--- a/src/arch/i386/lib/cpu.c
+++ b/src/arch/i386/lib/cpu.c
@@ -68,6 +68,11 @@ static void interrupts_on()
low |= APIC_DEFAULT_BASE;
wrmsr(APIC_BASE_MSR, low, high);
+ /*
+ * Set Task Priority to 'accept all'.
+ */
+ apic_write_around(APIC_TASKPRI,
+ apic_read_around(APIC_TASKPRI) & ~APIC_TPRI_MASK);
/* Put the local apic in virtual wire mode */
apic_write_around(APIC_SPIV,
@@ -91,10 +96,9 @@ static void interrupts_on()
| (APIC_LVT_REMOTE_IRR |APIC_SEND_PENDING |
APIC_DELIVERY_MODE_NMI)
);
-#if 1
+
printk_debug(" apic_id: %d ",
apic_read(APIC_ID));
-#endif
#else /* APIC */
#ifdef i686
diff --git a/src/cpu/i386/reset16.inc b/src/cpu/i386/reset16.inc
index 7c911d9ff2..190b75a32d 100644
--- a/src/cpu/i386/reset16.inc
+++ b/src/cpu/i386/reset16.inc
@@ -13,7 +13,7 @@ EXT(reset_vector):
* other assemblers to tell it where the segment registers
* are pointing in memory right now.
*/
- jmp EXT(_start_offset)
+ jmp EXT(_start)
#elif (_ROMBASE < 0x100000)
ljmp $((_ROMBASE & 0xf0000)>>4),$EXT(_start_offset);
#else
diff --git a/src/cpu/k8/earlymtrr.inc b/src/cpu/k8/earlymtrr.inc
index 903405bdfb..d14afb1a31 100644
--- a/src/cpu/k8/earlymtrr.inc
+++ b/src/cpu/k8/earlymtrr.inc
@@ -46,7 +46,7 @@ set_var_mtrr:
wrmsr
#if defined(XIP_ROM_SIZE) && defined(XIP_ROM_BASE)
- /* enable write back cachine so we can do execute in place
+ /* enable write base caching so we can do execute in place
* on the flash rom.
*/
movl $0x202, %ecx
diff --git a/src/include/cpu/p6/apic.h b/src/include/cpu/p6/apic.h
index b91cdb2a86..65a14603f5 100644
--- a/src/include/cpu/p6/apic.h
+++ b/src/include/cpu/p6/apic.h
@@ -10,6 +10,8 @@
#define APIC_ID 0x020
#define APIC_LVR 0x030
+#define APIC_TASKPRI 0x80
+#define APIC_TPRI_MASK 0xFF
#define APIC_ARBID 0x090
#define APIC_RRR 0x0C0
#define APIC_SVR 0x0f0
diff --git a/src/mainboard/amd/solo/auto.c b/src/mainboard/amd/solo/auto.c
index 33dea8e80d..e8e3976ef2 100644
--- a/src/mainboard/amd/solo/auto.c
+++ b/src/mainboard/amd/solo/auto.c
@@ -20,7 +20,9 @@ static int boot_cpu(void)
msr = rdmsr(0x1b);
bsp = !!(msr.lo & (1 << 8));
if (bsp) {
- print_debug("Bootstrap cpu\r\n");
+ print_debug("Bootstrap processor\r\n");
+ } else {
+ print_debug("Application processor\r\n");
}
return bsp;
@@ -110,14 +112,19 @@ static void dump_spd_registers(void)
}
}
-
-
-
static void main(void)
{
uart_init();
console_init();
+#if 0
+ print_debug(" XIP_ROM_BASE: ");
+ print_debug_hex32(XIP_ROM_BASE);
+ print_debug(" XIP_ROM_SIZE: ");
+ print_debug_hex32(XIP_ROM_SIZE);
+ print_debug("\r\n");
+#endif
if (boot_cpu() && !cpu_init_detected()) {
+ setup_default_resource_map();
setup_coherent_ht_domain();
enumerate_ht_chain();
print_pci_devices();
@@ -125,17 +132,7 @@ static void main(void)
sdram_initialize();
dump_spd_registers();
-#if 0
- ram_fill( 0x00100000, 0x00180000);
- ram_verify(0x00100000, 0x00180000);
-#endif
-#ifdef MEMORY_1024MB
- ram_fill( 0x00000000, 0x00001000);
- ram_verify(0x00000000, 0x00001000);
-#endif
-#ifdef MEMROY_512MB
- ram_fill( 0x00000000, 0x01ffffff);
- ram_verify(0x00000000, 0x01ffffff);
-#endif
+ /* Check the first 8M */
+ ram_check(0x00100000, 0x00800000);
}
}
diff --git a/src/mainboard/amd/solo/mptable.c b/src/mainboard/amd/solo/mptable.c
index 656b790035..49cd1951e6 100644
--- a/src/mainboard/amd/solo/mptable.c
+++ b/src/mainboard/amd/solo/mptable.c
@@ -7,8 +7,8 @@
void *smp_write_config_table(void *v, unsigned long * processor_map)
{
static const char sig[4] = "PCMP";
- static const char oem[8] = "LNXI ";
- static const char productid[12] = "P4DPR ";
+ static const char oem[8] = "AMD ";
+ static const char productid[12] = "SOLO7 ";
struct mp_config_table *mc;
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c
index 81f044cc13..68d8b39e36 100644
--- a/src/northbridge/amd/amdk8/coherent_ht.c
+++ b/src/northbridge/amd/amdk8/coherent_ht.c
@@ -1,3 +1,11 @@
+#define COHERENT_AMD_SOLO 1 /* AMD Solo motherboard */
+#define COHERENT_ARIMA_HDAMA 2 /* Arima HDAMA motherboard */
+
+#ifndef COHERENT_CONFIG
+#define COHERENT_CONFIG COHERENT_AMD_SOLO
+#endif
+
+
static void setup_coherent_ht_domain(void)
{
static const unsigned int register_values[] = {
@@ -296,278 +304,6 @@ static void setup_coherent_ht_domain(void)
* F0:0xB8 i = 1,
* F0:0xD8 i = 2,
*/
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
-#endif
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
-#endif
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
- PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
-#if MEMORY_1024MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
-#endif
-#if MEMORY_512MB
- PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
-#endif
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
- PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
- PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
- PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
-
};
int i;
int max;
@@ -598,4 +334,3 @@ static void setup_coherent_ht_domain(void)
}
print_debug("done.\r\n");
}
-
diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c
index 1f43e48671..6c757c993e 100644
--- a/src/northbridge/amd/amdk8/raminit.c
+++ b/src/northbridge/amd/amdk8/raminit.c
@@ -1,9 +1,305 @@
-#define MEMORY_512MB 0 /* SuSE Solo configuration */
-#define MEMORY_1024MB 1 /* LNXI Solo configuration */
+#define MEMORY_SUSE_SOLO 1 /* SuSE Solo configuration */
+#define MEMORY_LNXI_SOLO 2 /* LNXI Solo configuration */
+#define MEMORY_LNXI_HDAMA 3 /* LNXI HDAMA configuration */
+
+
+#ifndef MEMORY_CONFIG
+#define MEMORY_CONFIG MEMORY_SUSE_SOLO
+#endif
+
+static void setup_resource_map(const unsigned int *register_values, int max)
+{
+ int i;
+ print_debug("setting up resource map....\r\n");
+ for(i = 0; i < max; i += 3) {
+ device_t dev;
+ unsigned where;
+ unsigned long reg;
+#if 0
+ print_debug_hex32(register_values[i]);
+ print_debug(" <-");
+ print_debug_hex32(register_values[i+2]);
+ print_debug("\r\n");
+#endif
+ dev = register_values[i] & ~0xff;
+ where = register_values[i] & 0xff;
+ reg = pci_read_config32(dev, where);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2];
+ pci_write_config32(dev, where, reg);
+#if 0
+ reg = pci_read_config32(register_values[i]);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2] & ~register_values[i+1];
+ pci_write_config32(register_values[i], reg);
+#endif
+ }
+ print_debug("done.\r\n");
+}
+
+static void setup_default_resource_map(void)
+{
+ static const unsigned int register_values[] = {
+ /* Careful set limit registers before base registers which contain the enables */
+ /* DRAM Limit i Registers
+ * F1:0x44 i = 0
+ * F1:0x4C i = 1
+ * F1:0x54 i = 2
+ * F1:0x5C i = 3
+ * F1:0x64 i = 4
+ * F1:0x6C i = 5
+ * F1:0x74 i = 6
+ * F1:0x7C i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 3] Reserved
+ * [10: 8] Interleave select
+ * specifies the values of A[14:12] to use with interleave enable.
+ * [15:11] Reserved
+ * [31:16] DRAM Limit Address i Bits 39-24
+ * This field defines the upper address bits of a 40 bit address
+ * that define the end of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+ PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+ PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+ PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+ PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+ PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+ /* DRAM Base i Registers
+ * F1:0x40 i = 0
+ * F1:0x48 i = 1
+ * F1:0x50 i = 2
+ * F1:0x58 i = 3
+ * F1:0x60 i = 4
+ * F1:0x68 i = 5
+ * F1:0x70 i = 6
+ * F1:0x78 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 7: 2] Reserved
+ * [10: 8] Interleave Enable
+ * 000 = No interleave
+ * 001 = Interleave on A[12] (2 nodes)
+ * 010 = reserved
+ * 011 = Interleave on A[12] and A[14] (4 nodes)
+ * 100 = reserved
+ * 101 = reserved
+ * 110 = reserved
+ * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+ * [15:11] Reserved
+ * [13:16] DRAM Base Address i Bits 39-24
+ * This field defines the upper address bits of a 40-bit address
+ * that define the start of the DRAM region.
+ */
+ PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+ /* Memory-Mapped I/O Limit i Registers
+ * F1:0x84 i = 0
+ * F1:0x8C i = 1
+ * F1:0x94 i = 2
+ * F1:0x9C i = 3
+ * F1:0xA4 i = 4
+ * F1:0xAC i = 5
+ * F1:0xB4 i = 6
+ * F1:0xBC i = 7
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = Reserved
+ * [ 6: 6] Reserved
+ * [ 7: 7] Non-Posted
+ * 0 = CPU writes may be posted
+ * 1 = CPU writes must be non-posted
+ * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+ * This field defines the upp adddress bits of a 40-bit address that
+ * defines the end of a memory-mapped I/O region n
+ */
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00000000,
+
+ /* Memory-Mapped I/O Base i Registers
+ * F1:0x80 i = 0
+ * F1:0x88 i = 1
+ * F1:0x90 i = 2
+ * F1:0x98 i = 3
+ * F1:0xA0 i = 4
+ * F1:0xA8 i = 5
+ * F1:0xB0 i = 6
+ * F1:0xB8 i = 7
+ * [ 0: 0] Read Enable
+ * 0 = Reads disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Cpu Disable
+ * 0 = Cpu can use this I/O range
+ * 1 = Cpu requests do not use this I/O range
+ * [ 3: 3] Lock
+ * 0 = base/limit registers i are read/write
+ * 1 = base/limit registers i are read-only
+ * [ 7: 4] Reserved
+ * [31: 8] Memory-Mapped I/O Base Address i (39-16)
+ * This field defines the upper address bits of a 40bit address
+ * that defines the start of memory-mapped I/O region i
+ */
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00000000,
+
+ /* PCI I/O Limit i Registers
+ * F1:0xC4 i = 0
+ * F1:0xCC i = 1
+ * F1:0xD4 i = 2
+ * F1:0xDC i = 3
+ * [ 2: 0] Destination Node ID
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 3: 3] Reserved
+ * [ 5: 4] Destination Link ID
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 = reserved
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Limit Address i
+ * This field defines the end of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+ /* PCI I/O Base i Registers
+ * F1:0xC0 i = 0
+ * F1:0xC8 i = 1
+ * F1:0xD0 i = 2
+ * F1:0xD8 i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 3: 2] Reserved
+ * [ 4: 4] VGA Enable
+ * 0 = VGA matches Disabled
+ * 1 = matches all address < 64K and where A[9:0] is in the
+ * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+ * [ 5: 5] ISA Enable
+ * 0 = ISA matches Disabled
+ * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+ * from matching agains this base/limit pair
+ * [11: 6] Reserved
+ * [24:12] PCI I/O Base i
+ * This field defines the start of PCI I/O region n
+ * [31:25] Reserved
+ */
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+ /* Config Base and Limit i Registers
+ * F1:0xE0 i = 0
+ * F1:0xE4 i = 1
+ * F1:0xE8 i = 2
+ * F1:0xEC i = 3
+ * [ 0: 0] Read Enable
+ * 0 = Reads Disabled
+ * 1 = Reads Enabled
+ * [ 1: 1] Write Enable
+ * 0 = Writes Disabled
+ * 1 = Writes Enabled
+ * [ 2: 2] Device Number Compare Enable
+ * 0 = The ranges are based on bus number
+ * 1 = The ranges are ranges of devices on bus 0
+ * [ 3: 3] Reserved
+ * [ 6: 4] Destination Node
+ * 000 = Node 0
+ * 001 = Node 1
+ * 010 = Node 2
+ * 011 = Node 3
+ * 100 = Node 4
+ * 101 = Node 5
+ * 110 = Node 6
+ * 111 = Node 7
+ * [ 7: 7] Reserved
+ * [ 9: 8] Destination Link
+ * 00 = Link 0
+ * 01 = Link 1
+ * 10 = Link 2
+ * 11 - Reserved
+ * [15:10] Reserved
+ * [23:16] Bus Number Base i
+ * This field defines the lowest bus number in configuration region i
+ * [31:24] Bus Number Limit i
+ * This field defines the highest bus number in configuration regin i
+ */
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+ };
+ int max;
+ max = sizeof(register_values)/sizeof(register_values[0]);
+ setup_resource_map(register_values, max);
+}
static void sdram_set_registers(void)
{
static const unsigned int register_values[] = {
+
/* Careful set limit registers before base registers which contain the enables */
/* DRAM Limit i Registers
* F1:0x44 i = 0
@@ -31,13 +327,18 @@ static void sdram_set_registers(void)
* This field defines the upper address bits of a 40 bit address
* that define the end of the DRAM region.
*/
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x001f0000,
-#endif
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x003f0000,
+ PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x007f0001,
+#endif
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
@@ -75,7 +376,7 @@ static void sdram_set_registers(void)
* that define the start of the DRAM region.
*/
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000003,
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00400000,
@@ -84,7 +385,7 @@ static void sdram_set_registers(void)
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00400000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00400000,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00200000,
@@ -93,6 +394,16 @@ static void sdram_set_registers(void)
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00200000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00200000,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00400003,
+ PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00800000,
+ PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00800000,
+#endif
/* Memory-Mapped I/O Limit i Registers
* F1:0x84 i = 0
@@ -126,6 +437,7 @@ static void sdram_set_registers(void)
* This field defines the upp adddress bits of a 40-bit address that
* defines the end of a memory-mapped I/O region n
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00e1ff00,
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00dfff00,
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00e3ff00,
@@ -134,6 +446,17 @@ static void sdram_set_registers(void)
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000b00,
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00fe0b00,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00fe2f00,
+ PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00fec000,
+ PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x0000b000,
+ PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00000000,
+#endif
/* Memory-Mapped I/O Base i Registers
* F1:0x80 i = 0
@@ -161,6 +484,7 @@ static void sdram_set_registers(void)
* This field defines the upper address bits of a 40bit address
* that defines the start of memory-mapped I/O region i
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00e00003,
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00d80003,
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00e20003,
@@ -168,12 +492,23 @@ static void sdram_set_registers(void)
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000a03,
-#if MEMORY_1024MB
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00400003,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00200003,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00fc0003,
+ PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00fec00e,
+ PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000a03,
+ PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00000000,
+#endif
/* PCI I/O Limit i Registers
* F1:0xC4 i = 0
@@ -200,10 +535,18 @@ static void sdram_set_registers(void)
* This field defines the end of PCI I/O region n
* [31:25] Reserved
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x0000d000,
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x000ff000,
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+ PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+#endif
/* PCI I/O Base i Registers
* F1:0xC0 i = 0
@@ -230,10 +573,18 @@ static void sdram_set_registers(void)
* This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x0000d003,
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00001013,
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033,
+ PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+#endif
/* Config Base and Limit i Registers
* F1:0xE0 i = 0
@@ -271,10 +622,18 @@ static void sdram_set_registers(void)
* [31:24] Bus Number Limit i
* This field defines the highest bus number in configuration regin i
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003,
+ PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+ PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+#endif
/* DRAM CS Base Address i Registers
* F2:0x40 i = 0
@@ -298,16 +657,21 @@ static void sdram_set_registers(void)
* bits decode 32-MByte blocks of memory.
*/
PCI_ADDR(0, 0x18, 2, 0x40), 0x001f01fe, 0x00000001,
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x01000001,
PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x02000001,
PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x03000001,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00800001,
PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x01000001,
PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x01800001,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x44), 0x001f01fe, 0x00001001,
+ PCI_ADDR(0, 0x18, 2, 0x48), 0x001f01fe, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x4C), 0x001f01fe, 0x00000000,
+#endif
PCI_ADDR(0, 0x18, 2, 0x50), 0x001f01fe, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x54), 0x001f01fe, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x58), 0x001f01fe, 0x00000000,
@@ -331,18 +695,24 @@ static void sdram_set_registers(void)
* [31:30] Reserved
*
*/
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x00e0fe00,
PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x00e0fe00,
PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00e0fe00,
PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00e0fe00,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x0060fe00,
PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x0060fe00,
PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x0060fe00,
PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x0060fe00,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x60), 0xC01f01ff, 0x03e0ee00,
+ PCI_ADDR(0, 0x18, 2, 0x64), 0xC01f01ff, 0x03e0ee00,
+ PCI_ADDR(0, 0x18, 2, 0x68), 0xC01f01ff, 0x00000000,
+ PCI_ADDR(0, 0x18, 2, 0x6C), 0xC01f01ff, 0x00000000,
+#endif
PCI_ADDR(0, 0x18, 2, 0x70), 0xC01f01ff, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x74), 0xC01f01ff, 0x00000000,
PCI_ADDR(0, 0x18, 2, 0x78), 0xC01f01ff, 0x00000000,
@@ -367,12 +737,15 @@ static void sdram_set_registers(void)
* [11:11] Reserved
* [31:15]
*/
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000033,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000022,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x80), 0xffff8888, 0x00000003,
+#endif
/* DRAM Timing Low Register
* F2:0x88
* [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid)
@@ -437,7 +810,12 @@ static void sdram_set_registers(void)
* 1 = 3 bus clocks
* [31:29] Reserved
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x03623125,
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x88), 0xe8088008, 0x13723335,
+#endif
/* DRAM Timing High Register
* F2:0x8C
* [ 0: 0] Twtr (Write to Read Delay)
@@ -467,13 +845,15 @@ static void sdram_set_registers(void)
* 001 = 2 Mem clocks after CAS# (Registered Dimms)
* [31:23] Reserved
*/
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000930,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00000130,
#endif
-
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x8c), 0xff8fe08e, 0x00100a20,
+#endif
/* DRAM Config Low Register
* F2:0x90
* [ 0: 0] DLL Disable
@@ -544,6 +924,7 @@ static void sdram_set_registers(void)
* 111 = Oldest entry in DCQ can be bypassed 7 times
* [31:28] Reserved
*/
+#if (MEMORY_CONFIG == MEMORY_LNXI_SOLO) || (MEMORY_CONFIG == MEMORY_SUSE_SOLO)
PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
(4 << 25)|(0 << 24)|
(0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
@@ -551,6 +932,16 @@ static void sdram_set_registers(void)
(2 << 14)|(0 << 13)|(0 << 12)|
(0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
(0 << 3) |(0 << 1) |(0 << 0),
+#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x90), 0xf0000000,
+ (4 << 25)|(0 << 24)|
+ (0 << 23)|(0 << 22)|(0 << 21)|(0 << 20)|
+ (0 << 19)|(0 << 18)|(0 << 17)|(1 << 16)|
+ (2 << 14)|(0 << 13)|(0 << 12)|
+ (0 << 11)|(0 << 10)|(0 << 9)|(0 << 8)|
+ (0 << 3) |(0 << 1) |(0 << 0),
+#endif
/* DRAM Config High Register
* F2:0x94
* [ 0: 3] Maximum Asynchronous Latency
@@ -615,12 +1006,15 @@ static void sdram_set_registers(void)
* 1 = Enabled
* [31:30] Reserved
*/
-#if MEMORY_1024MB
+#if MEMORY_CONFIG == MEMORY_LNXI_SOLO
PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a05,
#endif
-#if MEMORY_512MB
+#if MEMORY_CONFIG == MEMORY_SUSE_SOLO
PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x0e2b0a06,
#endif
+#if MEMORY_CONFIG == MEMORY_LNXI_HDAMA
+ PCI_ADDR(0, 0x18, 2, 0x94), 0xc180f0f0, 0x065b0b08,
+#endif
/* DRAM Delay Line Register
* F2:0x98
* Adjust the skew of the input DQS strobe relative to DATA
diff --git a/src/pc80/mc146818rtc_early.c b/src/pc80/mc146818rtc_early.c
index 1d268f0482..96f8f5d0a4 100644
--- a/src/pc80/mc146818rtc_early.c
+++ b/src/pc80/mc146818rtc_early.c
@@ -1,6 +1,13 @@
#include <pc80/mc146818rtc.h>
#include <part/fallback_boot.h>
+#ifndef MAX_REBOOT_CNT
+#error "MAX_REBOOT_CNT not defined"
+#endif
+#if MAX_REBOOT_CNT > 15
+#error "MAX_REBOOT_CNT too high"
+#endif
+
static unsigned char cmos_read(unsigned char addr)
{
outb(addr, RTC_BASE_PORT + 0);
diff --git a/src/ram/ramtest.c b/src/ram/ramtest.c
index 55c22e7084..068d3bd705 100644
--- a/src/ram/ramtest.c
+++ b/src/ram/ramtest.c
@@ -1,8 +1,24 @@
+#if defined(i786)
+#define HAVE_MOVNTI 1
+#endif
+#if defined(k8)
+#define HAVE_MOVNTI 1
+#endif
+
static void write_phys(unsigned long addr, unsigned long value)
{
+#if HAVE_MOVNTI
+ asm volatile(
+ "movnti %1, (%0)"
+ : /* outputs */
+ : "r" (addr), "r" (value) /* inputs */
+ : /* clobbers */
+ );
+#else
volatile unsigned long *ptr;
ptr = (void *)addr;
*ptr = value;
+#endif
}
static unsigned long read_phys(unsigned long addr)
@@ -12,7 +28,7 @@ static unsigned long read_phys(unsigned long addr)
return *ptr;
}
-void ram_fill(unsigned long start, unsigned long stop)
+static void ram_fill(unsigned long start, unsigned long stop)
{
unsigned long addr;
/*
@@ -25,7 +41,7 @@ void ram_fill(unsigned long start, unsigned long stop)
print_debug("\r\n");
for(addr = start; addr < stop ; addr += 4) {
/* Display address being filled */
- if ((addr & 0xffff) == 0) {
+ if (!(addr & 0xffff)) {
print_debug_hex32(addr);
print_debug("\r");
}
@@ -36,7 +52,7 @@ void ram_fill(unsigned long start, unsigned long stop)
print_debug("\r\nDRAM filled\r\n");
}
-void ram_verify(unsigned long start, unsigned long stop)
+static void ram_verify(unsigned long start, unsigned long stop)
{
unsigned long addr;
/*
@@ -50,7 +66,7 @@ void ram_verify(unsigned long start, unsigned long stop)
for(addr = start; addr < stop ; addr += 4) {
unsigned long value;
/* Display address being tested */
- if ((addr & 0xffff) == 0) {
+ if (!(addr & 0xffff)) {
print_debug_hex32(addr);
print_debug("\r");
}
@@ -69,7 +85,7 @@ void ram_verify(unsigned long start, unsigned long stop)
}
-void ramcheck(unsigned long start, unsigned long stop)
+void ram_check(unsigned long start, unsigned long stop)
{
int result;
/*
diff --git a/src/southbridge/amd/amd8111/amd8111_lpc.c b/src/southbridge/amd/amd8111/amd8111_lpc.c
index f098bfa2b4..643b84cad9 100644
--- a/src/southbridge/amd/amd8111/amd8111_lpc.c
+++ b/src/southbridge/amd/amd8111/amd8111_lpc.c
@@ -1,5 +1,5 @@
/*
- * (C) 2003 Linux Networx
+ * (C) 2003 Linux Networx, SuSE Linux AG
*/
#include <console/console.h>
#include <device/device.h>
@@ -28,38 +28,33 @@ static struct ioapicreg ioapicregvalues[] = {
#define NMI (4 << 8)
#define SMI (2 << 8)
#define INT (1 << 8)
+ /* IO-APIC virtual wire mode configuration */
/* mask, trigger, polarity, destination, delivery, vector */
- {0x00, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT | 0, 0},
- {0x01, DISABLED, NONE},
- {0x02, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | INT | 0, 0},
- {0x03, DISABLED, NONE},
- {0x04, DISABLED, NONE},
- {0x05, DISABLED, NONE},
- {0x06, DISABLED, NONE},
- {0x07, DISABLED, NONE},
- {0x08, DISABLED, NONE},
- {0x09, DISABLED, NONE},
- {0x0a, DISABLED, NONE},
- {0x0b, DISABLED, NONE},
- {0x0c, DISABLED, NONE},
- {0x0d, DISABLED, NONE},
- {0x0e, DISABLED, NONE},
- {0x0f, DISABLED, NONE},
- {0x10, DISABLED, NONE},
- {0x11, DISABLED, NONE},
- {0x12, DISABLED, NONE},
- {0x13, DISABLED, NONE},
- {0x14, DISABLED, NONE},
- {0x14, DISABLED, NONE},
- {0x15, DISABLED, NONE},
- {0x16, DISABLED, NONE},
- {0x17, DISABLED, NONE},
- {0x18, DISABLED, NONE},
- {0x19, DISABLED, NONE},
- {0x20, DISABLED, NONE},
- {0x21, DISABLED, NONE},
- {0x22, DISABLED, NONE},
- {0x23, DISABLED, NONE},
+ { 0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST | ExtINT, NONE},
+ { 1, DISABLED, NONE},
+ { 2, DISABLED, NONE},
+ { 3, DISABLED, NONE},
+ { 4, DISABLED, NONE},
+ { 5, DISABLED, NONE},
+ { 6, DISABLED, NONE},
+ { 7, DISABLED, NONE},
+ { 8, DISABLED, NONE},
+ { 9, DISABLED, NONE},
+ { 10, DISABLED, NONE},
+ { 11, DISABLED, NONE},
+ { 12, DISABLED, NONE},
+ { 13, DISABLED, NONE},
+ { 14, DISABLED, NONE},
+ { 15, DISABLED, NONE},
+ { 16, DISABLED, NONE},
+ { 17, DISABLED, NONE},
+ { 18, DISABLED, NONE},
+ { 19, DISABLED, NONE},
+ { 20, DISABLED, NONE},
+ { 21, DISABLED, NONE},
+ { 22, DISABLED, NONE},
+ { 23, DISABLED, NONE},
+ /* Be careful and don't write past the end... */
};
static void setup_ioapic(void)
@@ -71,6 +66,7 @@ static void setup_ioapic(void)
struct ioapicreg *a = ioapicregvalues;
l = (unsigned long *) ioapic_base;
+
for (i = 0; i < sizeof(ioapicregvalues) / sizeof(ioapicregvalues[0]);
i++, a++) {
l[0] = (a->reg * 2) + 0x10;
@@ -95,13 +91,11 @@ static void lpc_init(struct device *dev)
printk_debug("lpc_init\n");
-#if 0
/* IO APIC initialization */
byte = pci_read_config8(dev, 0x4B);
byte |= 1;
pci_write_config8(dev, 0x4B, byte);
setup_ioapic();
-#endif
/* posted memory write enable */
byte = pci_read_config8(dev, 0x46);