google/chromeec: Update EC command header

In particular, update host_event the original value for MKBP was not
set in ToT.

CQ-DEPEND=CL:353634
BUG=b:27849483
BRANCH=none
TEST=Compile on Samus. Tested in Cyan branch.

Change-Id: I0184e4f0e45c3321742d3138ae0178c159cbdd0a
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: cc6750b705300f5b94bf23fe5485d6e7a5f9e327
Original-Change-Id: I60df65bfd4053207fa90b1c2a8609eec09f3c475
Original-Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/354040
Reviewed-on: https://review.coreboot.org/15567
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>

2 files changed, 83 insertions, 3 deletions

diff --git a/src/ec/google/chromeec/acpi/ec.asl b/src/ec/google/chromeec/acpi/ec.asl
index 232a5ccd0b..13317f6d4c 100644
--- a/src/ec/google/chromeec/acpi/ec.asl
+++ b/src/ec/google/chromeec/acpi/ec.asl
@@ -290,7 +290,7 @@ Device (EC0)
 	}
 
 	// MKBP interrupt.
-	Method (_Q1A, 0, NotSerialized)
+	Method (_Q1B, 0, NotSerialized)
 	{
 		Store ("EC: MKBP", Debug)
 		Notify (CREC, 0x80)
diff --git a/src/ec/google/chromeec/ec_commands.h b/src/ec/google/chromeec/ec_commands.h
index 5c491cae9e..2e2a695966 100644
--- a/src/ec/google/chromeec/ec_commands.h
+++ b/src/ec/google/chromeec/ec_commands.h
@@ -459,8 +459,11 @@ enum host_event_code {
 	/* Keyboard fastboot combo has been pressed */
 	EC_HOST_EVENT_KEYBOARD_FASTBOOT = 25,
 
+	/* EC RTC event occurred */
+	EC_HOST_EVENT_RTC = 26,
+
 	/* Emulate MKBP event */
-	EC_HOST_EVENT_MKBP = 26,
+	EC_HOST_EVENT_MKBP = 27,
 
 	/*
 	 * The high bit of the event mask is not used as a host event code.  If
@@ -1201,6 +1204,7 @@ struct ec_params_pwm_set_fan_target_rpm_v1 {
 } __packed;
 
 /* Get keyboard backlight */
+/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */
 #define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x22
 
 struct ec_response_pwm_get_keyboard_backlight {
@@ -1209,6 +1213,7 @@ struct ec_response_pwm_get_keyboard_backlight {
 } __packed;
 
 /* Set keyboard backlight */
+/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */
 #define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x23
 
 struct ec_params_pwm_set_keyboard_backlight {
@@ -1229,6 +1234,37 @@ struct ec_params_pwm_set_fan_duty_v1 {
 	uint8_t fan_idx;
 } __packed;
 
+#define EC_CMD_PWM_SET_DUTY 0x25
+/* 16 bit duty cycle, 0xffff = 100% */
+#define EC_PWM_MAX_DUTY 0xffff
+
+enum ec_pwm_type {
+	/* All types, indexed by board-specific enum pwm_channel */
+	EC_PWM_TYPE_GENERIC = 0,
+	/* Keyboard backlight */
+	EC_PWM_TYPE_KB_LIGHT,
+	/* Display backlight */
+	EC_PWM_TYPE_DISPLAY_LIGHT,
+	EC_PWM_TYPE_COUNT,
+};
+
+struct ec_params_pwm_set_duty {
+	uint16_t duty;     /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
+	uint8_t pwm_type;  /* ec_pwm_type */
+	uint8_t index;     /* Type-specific index, or 0 if unique */
+} __packed;
+
+#define EC_CMD_PWM_GET_DUTY 0x26
+
+struct ec_params_pwm_get_duty {
+	uint8_t pwm_type;  /* ec_pwm_type */
+	uint8_t index;     /* Type-specific index, or 0 if unique */
+} __packed;
+
+struct ec_response_pwm_get_duty {
+	uint16_t duty;     /* Duty cycle, EC_PWM_MAX_DUTY = 100% */
+} __packed;
+
 /*****************************************************************************/
 /*
  * Lightbar commands. This looks worse than it is. Since we only use one HOST
@@ -1780,6 +1816,7 @@ enum motionsensor_chip {
 	MOTIONSENSE_CHIP_SI1143 = 5,
 	MOTIONSENSE_CHIP_KX022 = 6,
 	MOTIONSENSE_CHIP_L3GD20H = 7,
+	MOTIONSENSE_CHIP_BMA255 = 8,
 };
 
 struct ec_response_motion_sensor_data {
@@ -2509,6 +2546,13 @@ struct ec_response_get_next_event {
 	union ec_response_get_next_data data;
 } __packed;
 
+/* Run keyboard factory test scanning */
+#define EC_CMD_KEYBOARD_FACTORY_TEST 0x68
+
+struct ec_response_keyboard_factory_test {
+	uint16_t shorted;	/* Keyboard pins are shorted */
+} __packed;
+
 /*****************************************************************************/
 /* Temperature sensor commands */
 
@@ -3182,6 +3226,27 @@ struct ec_params_entering_mode {
 #define VBOOT_MODE_RECOVERY  2
 
 /*****************************************************************************/
+/*
+ * I2C passthru protection command: Protects I2C tunnels against access on
+ * certain addresses (board-specific).
+ */
+#define EC_CMD_I2C_PASSTHRU_PROTECT 0xb7
+
+enum ec_i2c_passthru_protect_subcmd {
+	EC_CMD_I2C_PASSTHRU_PROTECT_STATUS = 0x0,
+	EC_CMD_I2C_PASSTHRU_PROTECT_ENABLE = 0x1,
+};
+
+struct ec_params_i2c_passthru_protect {
+	uint8_t subcmd;
+	uint8_t port;		/* I2C port number */
+} __packed;
+
+struct ec_response_i2c_passthru_protect {
+	uint8_t status;		/* Status flags (0: unlocked, 1: locked) */
+} __packed;
+
+/*****************************************************************************/
 /* System commands */
 
 /*
@@ -3609,8 +3674,23 @@ struct ec_params_pd_write_log_entry {
 	uint8_t port; /* port#, or 0 for events unrelated to a given port */
 } __packed;
 
-#endif  /* !__ACPI__ */
 
+/* Control USB-PD chip */
+#define EC_CMD_PD_CONTROL 0x119
+
+enum ec_pd_control_cmd {
+	PD_SUSPEND = 0,      /* Suspend the PD chip (EC: stop talking to PD) */
+	PD_RESUME,           /* Resume the PD chip (EC: start talking to PD) */
+	PD_RESET,            /* Force reset the PD chip */
+	PD_CONTROL_DISABLE   /* Disable further calls to this command */
+};
+
+struct ec_params_pd_control {
+	uint8_t chip;         /* chip id (should be 0) */
+	uint8_t subcmd;
+} __packed;
+
+#endif  /* !__ACPI__ */
 
 /*****************************************************************************/
 /*