diff options
| author | Felix Held <felix-coreboot@felixheld.de> | 2021-02-04 21:31:49 +0100 |
|---|---|---|
| committer | Felix Held <felix-coreboot@felixheld.de> | 2021-02-05 22:03:34 +0000 |
| commit | 757d645cb069f1759303467efb9753fcdd847da4 (patch) | |
| tree | 4d6d8c77d914d9fe176c86c1c4de12f22baced18 /src | |
| parent | 74bc46c4db959133e579da129638fb51a41d7ccd (diff) | |
soc/amd/picasso: remove PICASSO_ACPI_IO_BASE Kconfig option
This was the only I/O base address in Kconfig, no board changed it and
if a board changed it, it needs to make sure that it won't overlap with
other I/O resources, so just use the same value as constant in the
define instead of the value from Kconfig. Also remove the PICASSO_
prefix from ACPI_IO_BASE.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7ea62f1101ddefa8785da92de5ba2aaf7945694a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/amd/picasso/Kconfig | 6 | ||||
| -rw-r--r-- | src/soc/amd/picasso/acpi.c | 2 | ||||
| -rw-r--r-- | src/soc/amd/picasso/include/soc/iomap.h | 12 |
3 files changed, 7 insertions, 13 deletions
diff --git a/src/soc/amd/picasso/Kconfig b/src/soc/amd/picasso/Kconfig index 4989ee2412..4868d84d3c 100644 --- a/src/soc/amd/picasso/Kconfig +++ b/src/soc/amd/picasso/Kconfig @@ -263,12 +263,6 @@ config SERIRQ_CONTINUOUS_MODE Set this option to y for serial IRQ in continuous mode. Otherwise it is in quiet mode. -config PICASSO_ACPI_IO_BASE - hex - default 0x400 - help - Base address for the ACPI registers. - config CONSOLE_UART_BASE_ADDRESS depends on CONSOLE_SERIAL && AMD_SOC_CONSOLE_UART hex diff --git a/src/soc/amd/picasso/acpi.c b/src/soc/amd/picasso/acpi.c index ebb2bcd195..eba9dfee3d 100644 --- a/src/soc/amd/picasso/acpi.c +++ b/src/soc/amd/picasso/acpi.c @@ -94,7 +94,7 @@ void acpi_fill_fadt(acpi_fadt_t *fadt) { const struct soc_amd_picasso_config *cfg = config_of_soc(); - printk(BIOS_DEBUG, "pm_base: 0x%04x\n", PICASSO_ACPI_IO_BASE); + printk(BIOS_DEBUG, "pm_base: 0x%04x\n", ACPI_IO_BASE); fadt->sci_int = 9; /* IRQ 09 - ACPI SCI */ diff --git a/src/soc/amd/picasso/include/soc/iomap.h b/src/soc/amd/picasso/include/soc/iomap.h index 0296c87dd8..3d0432b303 100644 --- a/src/soc/amd/picasso/include/soc/iomap.h +++ b/src/soc/amd/picasso/include/soc/iomap.h @@ -72,15 +72,15 @@ /* I/O Ranges */ #define ACPI_SMI_CTL_PORT 0xb2 -#define PICASSO_ACPI_IO_BASE CONFIG_PICASSO_ACPI_IO_BASE -#define ACPI_PM_EVT_BLK (PICASSO_ACPI_IO_BASE + 0x00) /* 4 bytes */ +#define ACPI_IO_BASE 0x400 +#define ACPI_PM_EVT_BLK (ACPI_IO_BASE + 0x00) /* 4 bytes */ #define ACPI_PM1_STS (ACPI_PM_EVT_BLK + 0x00) /* 2 bytes */ #define ACPI_PM1_EN (ACPI_PM_EVT_BLK + 0x02) /* 2 bytes */ -#define ACPI_PM1_CNT_BLK (PICASSO_ACPI_IO_BASE + 0x04) /* 2 bytes */ -#define ACPI_PM_TMR_BLK (PICASSO_ACPI_IO_BASE + 0x08) /* 4 bytes */ -#define ACPI_CPU_CONTROL (PICASSO_ACPI_IO_BASE + 0x13) +#define ACPI_PM1_CNT_BLK (ACPI_IO_BASE + 0x04) /* 2 bytes */ +#define ACPI_PM_TMR_BLK (ACPI_IO_BASE + 0x08) /* 4 bytes */ +#define ACPI_CPU_CONTROL (ACPI_IO_BASE + 0x13) /* doc says 0x14 for GPE0_BLK but FT5 only works with 0x20 */ -#define ACPI_GPE0_BLK (PICASSO_ACPI_IO_BASE + 0x20) /* 8 bytes */ +#define ACPI_GPE0_BLK (ACPI_IO_BASE + 0x20) /* 8 bytes */ #define ACPI_GPE0_STS (ACPI_GPE0_BLK + 0x00) /* 4 bytes */ #define ACPI_GPE0_EN (ACPI_GPE0_BLK + 0x04) /* 4 bytes */ #define NCP_ERR 0xf0 |