summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorXavi Drudis Ferran <xdrudis@tinet.cat>2011-02-28 03:02:40 +0000
committerMarc Jones <marc.jones@amd.com>2011-02-28 03:02:40 +0000
commit19245c94c8d8e293fdb7e4c734ef0abccf601ca2 (patch)
treedcd454b470b68ddfd30169a3faf61f5c4bc03d70 /src
parent9cbcf1ada4ac32b3fb638b0a002f9cb7ae003072 (diff)
Improving BKDG implementation of P-states,
CPU and northbridge frequency and voltage handling for Fam 10 in SVI mode. Factor out some common expressions. Add an error message when coreboots hangs waiting for a pstate that never comes (it happened to me), and throw some paranoia at it for good mesure. If I understood BKDG fam10 CPUs never need a software initiated vid transition, because the hardware knows what to do when you just request a Pstate change if the cpu is properly configured. In fact unifying a little what PVI and SVI do was better for my board (SVI). So I drop transitionVid, which I didn't understand either (why did it have a case for PVI if it is never called for PVI ? Why did the PVI case distinguigh cpu or nb when PVI is theoretically single voltage plane ? ). Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/cpu/amd/model_10xxx/fidvid.c362
-rw-r--r--src/northbridge/amd/amdht/AsPsDefs.h15
-rw-r--r--src/northbridge/amd/amdmct/wrappers/mcti_d.c13
3 files changed, 173 insertions, 217 deletions
diff --git a/src/cpu/amd/model_10xxx/fidvid.c b/src/cpu/amd/model_10xxx/fidvid.c
index 13416f7bc2..9c008b2bc9 100644
--- a/src/cpu/amd/model_10xxx/fidvid.c
+++ b/src/cpu/amd/model_10xxx/fidvid.c
@@ -67,13 +67,13 @@ static void enable_fid_change(u8 fid)
}
static void setVSRamp(device_t dev) {
- /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSRampTime]
- * If this field accepts 8 values between 10 and 500 us why
- * does page 324 say "BIOS should set this field to 001b."
+ /* BKDG r31116 2010-04-22 2.4.1.7 step b F3xD8[VSRampTime]
+ * If this field accepts 8 values between 10 and 500 us why
+ * does page 324 say "BIOS should set this field to 001b."
* (20 us) ?
* Shouldn't it depend on the voltage regulators, mainboard
- * or something ?
- */
+ * or something ?
+ */
u32 dword;
dword = pci_read_config32(dev, 0xd8);
dword &= VSRAMP_MASK;
@@ -180,18 +180,18 @@ static void recalculateVsSlamTimeSettingOnCorePre(device_t dev)
}
static u32 nb_clk_did(int node, u32 cpuRev,u8 procPkg) {
- u8 link0isGen3 = 0;
+ u8 link0isGen3 = 0;
u8 offset;
if (AMD_CpuFindCapability(node, 0, &offset)) {
link0isGen3 = (AMD_checkLinkType(node, 0, offset) & HTPHY_LINKTYPE_HT3 );
}
- /* FIXME: NB_CLKDID should be 101b for AMD_DA_C2 in package
- S1g3 in link Gen3 mode, but I don't know how to tell
- package S1g3 from S1g4 */
- if ((cpuRev & AMD_DA_C2) && (procPkg & AMD_PKGTYPE_S1gX)
+ /* FIXME: NB_CLKDID should be 101b for AMD_DA_C2 in package
+ S1g3 in link Gen3 mode, but I don't know how to tell
+ package S1g3 from S1g4 */
+ if ((cpuRev & AMD_DA_C2) && (procPkg & AMD_PKGTYPE_S1gX)
&& link0isGen3) {
- return 5 ; /* divide clk by 128*/
- } else {
+ return 5 ; /* divide clk by 128*/
+ } else {
return 4 ; /* divide clk by 16 */
}
}
@@ -200,29 +200,29 @@ static u32 nb_clk_did(int node, u32 cpuRev,u8 procPkg) {
static u32 power_up_down(int node, u8 procPkg) {
u32 dword=0;
/* from CPU rev guide #41322 rev 3.74 June 2010 Table 26 */
- u8 singleLinkFlag = ((procPkg == AMD_PKGTYPE_AM3_2r2)
- || (procPkg == AMD_PKGTYPE_S1gX)
+ u8 singleLinkFlag = ((procPkg == AMD_PKGTYPE_AM3_2r2)
+ || (procPkg == AMD_PKGTYPE_S1gX)
|| (procPkg == AMD_PKGTYPE_ASB2));
if (singleLinkFlag) {
- /*
+ /*
* PowerStepUp=01000b - 50nS
* PowerStepDown=01000b - 50ns
*/
dword |= PW_STP_UP50 | PW_STP_DN50;
} else {
- u32 dispRefModeEn = (pci_read_config32(NODE_PCI(node,0),0x68) >> 24) & 1;
+ u32 dispRefModeEn = (pci_read_config32(NODE_PCI(node,0),0x68) >> 24) & 1;
u32 isocEn = 0;
- int j;
+ int j;
for(j=0 ; (j<4) && (!isocEn) ; j++ ) {
u8 offset;
if (AMD_CpuFindCapability(node, j, &offset)) {
isocEn = (pci_read_config32(NODE_PCI(node,0),offset+4) >>12) & 1;
}
- }
+ }
if (dispRefModeEn || isocEn) {
- dword |= PW_STP_UP50 | PW_STP_DN50 ;
+ dword |= PW_STP_UP50 | PW_STP_DN50 ;
} else {
/* get number of cores for PowerStepUp & PowerStepDown in server
1 core - 400nS - 0000b
@@ -247,17 +247,17 @@ static u32 power_up_down(int node, u8 procPkg) {
}
}
}
- return dword;
+ return dword;
}
-static void config_clk_power_ctrl_reg0(int node, u32 cpuRev, u8 procPkg) {
+static void config_clk_power_ctrl_reg0(int node, u32 cpuRev, u8 procPkg) {
device_t dev = NODE_PCI(node, 3);
/* Program fields in Clock Power/Control register0 (F3xD4) */
/* set F3xD4 Clock Power/Timing Control 0 Register
* NbClkDidApplyAll=1b
- * NbClkDid=100b or 101b
+ * NbClkDid=100b or 101b
* PowerStepUp= "platform dependent"
* PowerStepDown= "platform dependent"
* LinkPllLink=01b
@@ -275,7 +275,7 @@ static void config_clk_power_ctrl_reg0(int node, u32 cpuRev, u8 procPkg) {
}
-static void config_power_ctrl_misc_reg(device_t dev,u32 cpuRev, u8 procPkg) {
+static void config_power_ctrl_misc_reg(device_t dev,u32 cpuRev, u8 procPkg) {
/* check PVI/SVI */
u32 dword = pci_read_config32(dev, 0xA0);
@@ -302,10 +302,10 @@ static void config_power_ctrl_misc_reg(device_t dev,u32 cpuRev, u8 procPkg) {
dword = dtemp;
}
/* set the rest of A0 since we're at it... */
-
- if (cpuRev & (AMD_DA_Cx | AMD_RB_C3 )) {
+
+ if (cpuRev & (AMD_DA_Cx | AMD_RB_C3 )) {
dword |= NB_PSTATE_FORCE_ON;
- } // else should we clear it ?
+ } // else should we clear it ?
if ((procPkg == AMD_PKGTYPE_G34) || (procPkg == AMD_PKGTYPE_C32) ) {
@@ -320,41 +320,41 @@ static void config_power_ctrl_misc_reg(device_t dev,u32 cpuRev, u8 procPkg) {
#endif
pci_write_config32(dev, 0xA0, dword);
}
-
+
static void config_nb_syn_ptr_adj(device_t dev, u32 cpuRev) {
/* Note the following settings are additional from the ported
* function setFidVidRegs()
*/
- /* adjust FIFO between nb and core clocks to max allowed
- values (min latency) */
+ /* adjust FIFO between nb and core clocks to max allowed
+ values (min latency) */
u32 nbPstate = pci_read_config32(dev,0x1f0) & NB_PSTATE_MASK;
u8 nbSynPtrAdj;
if ((cpuRev & (AMD_DR_Bx|AMD_DA_Cx) )
- || ( (cpuRev & AMD_RB_C3) && (nbPstate!=0))) {
- nbSynPtrAdj = 5;
+ || ( (cpuRev & AMD_RB_C3) && (nbPstate!=0))) {
+ nbSynPtrAdj = 5;
} else {
nbSynPtrAdj = 6;
}
u32 dword = pci_read_config32(dev, 0xDc);
dword &= ~ NB_SYN_PTR_ADJ_MASK;
- dword |= nbSynPtrAdj << NB_SYN_PTR_ADJ_POS;
+ dword |= nbSynPtrAdj << NB_SYN_PTR_ADJ_POS;
/* NbsynPtrAdj set to 5 or 6 per BKDG (needs reset) */
pci_write_config32(dev, 0xdc, dword);
}
static void config_acpi_pwr_state_ctrl_regs(device_t dev, u32 cpuRev, u8 procPkg) {
- /* step 1, chapter 2.4.2.6 of AMD Fam 10 BKDG #31116 Rev 3.48 22.4.2010 */
+ /* step 1, chapter 2.4.2.6 of AMD Fam 10 BKDG #31116 Rev 3.48 22.4.2010 */
u32 dword;
u32 c1= 1;
if (cpuRev & (AMD_DR_Bx)) {
// will coreboot ever enable cache scrubbing ?
// if it does, will it be enough to check the current state
- // or should we configure for what we'll set up later ?
+ // or should we configure for what we'll set up later ?
dword = pci_read_config32(dev, 0x58);
u32 scrubbingCache = dword &
( (0x1F << 16) // DCacheScrub
- | (0x1F << 8) ); // L2Scrub
+ | (0x1F << 8) ); // L2Scrub
if (scrubbingCache) {
c1 = 0x80;
} else {
@@ -368,7 +368,7 @@ static void config_acpi_pwr_state_ctrl_regs(device_t dev, u32 cpuRev, u8 procPkg
c1 = 0x80;
}
}
- dword = (c1 << 24) | (0xE641E6);
+ dword = (c1 << 24) | (0xE641E6);
pci_write_config32(dev, 0x84, dword);
@@ -377,25 +377,25 @@ frequency and the chipset does not support a 10us minimum LDTSTOP
assertion time, then { If ASB2 && SVI then smaf001 = F6h else
smaf001=87h. } else ... I hardly know what it means or how to check
it from here, so I bluntly assume it is false and code here the else,
-which is easier */
+which is easier */
u32 smaf001 = 0xE6;
if (cpuRev & AMD_DR_Bx ) {
smaf001 = 0xA6;
} else {
#if CONFIG_SVI_HIGH_FREQ
- if (cpuRev & (AMD_RB_C3 | AMD_DA_C3)) {
- smaf001 = 0xF6;
+ if (cpuRev & (AMD_RB_C3 | AMD_DA_C3)) {
+ smaf001 = 0xF6;
}
#endif
}
u32 fidvidChange = 0;
if (((cpuRev & AMD_DA_Cx) && (procPkg & AMD_PKGTYPE_S1gX))
- || (cpuRev & AMD_RB_C3) ) {
+ || (cpuRev & AMD_RB_C3) ) {
fidvidChange=0x0B;
- }
- dword = (0xE6 << 24) | (fidvidChange << 16)
- | (smaf001 << 8) | 0x81;
+ }
+ dword = (0xE6 << 24) | (fidvidChange << 16)
+ | (smaf001 << 8) | 0x81;
pci_write_config32(dev, 0x80, dword);
}
@@ -423,7 +423,7 @@ static void prep_fid_change(void)
config_clk_power_ctrl_reg0(i,cpuRev,procPkg);
- config_power_ctrl_misc_reg(dev,cpuRev,procPkg);
+ config_power_ctrl_misc_reg(dev,cpuRev,procPkg);
config_nb_syn_ptr_adj(dev,cpuRev);
config_acpi_pwr_state_ctrl_regs(dev,cpuRev,procPkg);
@@ -443,6 +443,62 @@ static void prep_fid_change(void)
}
}
+static void waitCurrentPstate(u32 target_pstate){
+ msr_t initial_msr = rdmsr(TSC_MSR);
+ msr_t pstate_msr = rdmsr(CUR_PSTATE_MSR);
+ msr_t tsc_msr;
+ u8 timedout ;
+
+ /* paranoia ? I fear when we run fixPsNbVidBeforeWR we can enter a
+ * P1 that is a copy of P0, therefore has the same NB DID but the
+ * TSC will count twice per tick, so we have to wait for twice the
+ * count to achieve the desired timeout. But I'm likely to
+ * misunderstand this...
+ */
+ u32 corrected_timeout = ( (pstate_msr.lo==1)
+ && (!(rdmsr(0xC0010065).lo & NB_DID_M_ON)) ) ?
+ WAIT_PSTATE_TIMEOUT*2 : WAIT_PSTATE_TIMEOUT ;
+ msr_t timeout;
+
+ timeout.lo = initial_msr.lo + corrected_timeout ;
+ timeout.hi = initial_msr.hi;
+ if ( (((u32)0xffffffff) - initial_msr.lo) < corrected_timeout ) {
+ timeout.hi++;
+ }
+
+ // assuming TSC ticks at 1.25 ns per tick (800 MHz)
+ do {
+ pstate_msr = rdmsr(CUR_PSTATE_MSR);
+ tsc_msr = rdmsr(TSC_MSR);
+ timedout = (tsc_msr.hi > timeout.hi)
+ || ((tsc_msr.hi == timeout.hi) && (tsc_msr.lo > timeout.lo ));
+ } while ( (pstate_msr.lo != target_pstate) && (! timedout) ) ;
+
+ if (pstate_msr.lo != target_pstate) {
+ msr_t limit_msr = rdmsr(0xc0010061);
+ printk(BIOS_ERR, "*** Time out waiting for P-state %01x. Current P-state %01x P-state current limit MSRC001_0061=%02x\n", target_pstate, pstate_msr.lo, limit_msr.lo);
+
+ do { // should we just go on instead ?
+ pstate_msr = rdmsr(CUR_PSTATE_MSR);
+ } while ( pstate_msr.lo != target_pstate ) ;
+ }
+}
+
+static void set_pstate(u32 nonBoostedPState) {
+ msr_t msr;
+
+ // Transition P0 for calling core.
+ msr = rdmsr(0xC0010062);
+
+ msr.lo = nonBoostedPState;
+ wrmsr(0xC0010062, msr);
+
+ /* Wait for P0 to set. */
+ waitCurrentPstate(nonBoostedPState);
+}
+
+
+
static void UpdateSinglePlaneNbVid(void)
{
@@ -468,157 +524,62 @@ static void UpdateSinglePlaneNbVid(void)
}
}
-static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid)
-{
- msr_t msr;
- u8 startup_pstate;
-
- /* This function sets NbVid before the warm reset.
- * Get StartupPstate from MSRC001_0071.
- * Read Pstate register pionted by [StartupPstate].
- * and copy its content to P0 and P1 registers.
- * Copy newNbVid to P0[NbVid].
- * transition to P1 on all cores,
- * then transition to P0 on core 0.
- * Wait for MSRC001_0063[CurPstate] = 000b on core 0.
- */
-
- msr = rdmsr(0xc0010071);
+static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid, u32 dev, u8 pviMode)
+ {
+ msr_t msr;
+ u8 startup_pstate;
+
+ /* This function sets NbVid before the warm reset.
+ * Get StartupPstate from MSRC001_0071.
+ * Read Pstate register pointed by [StartupPstate].
+ * and copy its content to P0 and P1 registers.
+ * Copy newNbVid to P0[NbVid].
+ * transition to P1 on all cores,
+ * then transition to P0 on core 0.
+ * Wait for MSRC001_0063[CurPstate] = 000b on core 0.
+ * see BKDG rev 3.48 2.4.2.9.1 BIOS NB COF and VID Configuration
+ * for SVI and Single-Plane PVI Systems
+ */
+
+ msr = rdmsr(0xc0010071);
startup_pstate = (msr.hi >> (32 - 32)) & 0x07;
- /* Copy startup pstate to P1 and P0 MSRs. Set the maxvid for this node in P0.
- * Then transition to P1 for corex and P0 for core0.
- * These setting will be cleared by the warm reset
+ /* Copy startup pstate to P1 and P0 MSRs. Set the maxvid for
+ * this node in P0. Then transition to P1 for corex and P0
+ * for core0. These setting will be cleared by the warm reset
*/
msr = rdmsr(0xC0010064 + startup_pstate);
wrmsr(0xC0010065, msr);
wrmsr(0xC0010064, msr);
+ /* missing step 2 from BDKG , F3xDC[PstateMaxVal] =
+ * max(1,F3xDC[PstateMaxVal] ) because it would take
+ * synchronization between cores and we don't think
+ * PstatMaxVal is going to be 0 on cold reset anyway ?
+ */
+ if ( ! (pci_read_config32(dev, 0xDC) & (~ PS_MAX_VAL_MASK)) ) {
+ printk(BIOS_ERR,"F3xDC[PstateMaxVal] is zero. Northbridge voltage setting will fail. fixPsNbVidBeforeWR in fidvid.c needs fixing. See AMD # 31116 rev 3.48 BKDG 2.4.2.9.1 \n");
+ };
+
msr.lo &= ~0xFE000000; // clear nbvid
- msr.lo |= newNbVid << 25;
+ msr.lo |= (newNbVid << 25);
wrmsr(0xC0010064, msr);
- UpdateSinglePlaneNbVid();
+ if (pviMode) { /* single plane*/
+ UpdateSinglePlaneNbVid();
+ }
// Transition to P1 for all APs and P0 for core0.
- msr = rdmsr(0xC0010062);
- msr.lo = (msr.lo & ~0x07) | 1;
- wrmsr(0xC0010062, msr);
-
- // Wait for P1 to set.
- do {
- msr = rdmsr(0xC0010063);
- } while (msr.lo != 1);
+ set_pstate(1);
if (coreid == 0) {
- msr.lo = msr.lo & ~0x07;
- wrmsr(0xC0010062, msr);
- // Wait for P0 to set.
- do {
- msr = rdmsr(0xC0010063);
- } while (msr.lo != 0);
- }
-}
-
-static void coreDelay(void)
-{
- u32 saved;
- u32 hi, lo, msr;
- u32 cycles;
-
- /* delay ~40us
- This seems like a hack to me...
- It would be nice to have a central delay function. */
-
- cycles = 8000 << 3; /* x8 (number of 1.25ns ticks) */
-
- msr = 0x10; /* TSC */
- _RDMSR(msr, &lo, &hi);
- saved = lo;
- do {
- _RDMSR(msr, &lo, &hi);
- } while (lo - saved < cycles);
-}
-
-static void transitionVid(u32 targetVid, u8 dev, u8 isNb)
-{
- u32 currentVid, dtemp;
- msr_t msr;
- u8 vsTimecode;
- u16 timeTable[8] = { 10, 20, 30, 40, 60, 100, 200, 500 };
- int vsTime;
+ set_pstate(0);
+ }
- /* This function steps or slam the Nb VID to the target VID.
- * It uses VSRampTime for [SlamVidMode]=0 ([PviMode]=1)
- * or VSSlamTime for [SlamVidMode]=1 ([PviMode]=0)to time period.
+ /* missing step 7 (restore PstateMax to 0 if needed) because
+ * we skipped step 2
*/
- /* get the current VID */
- msr = rdmsr(0xC0010071);
- if (isNb)
- currentVid = (msr.lo >> NB_VID_POS) & BIT_MASK_7;
- else
- currentVid = (msr.lo >> CPU_VID_POS) & BIT_MASK_7;
-
- /* Read MSRC001_0070 COFVID Control Register */
- msr = rdmsr(0xC0010070);
-
- /* check PVI/SPI */
- dtemp = pci_read_config32(dev, 0xA0);
- if (dtemp & PVI_MODE) { /* PVI, step VID */
- if (currentVid < targetVid) {
- while (currentVid < targetVid) {
- currentVid++;
- if (isNb)
- msr.lo = (msr.lo & NB_VID_MASK_OFF) | (currentVid << NB_VID_POS);
- else
- msr.lo = (msr.lo & CPU_VID_MASK_OFF) | (currentVid << CPU_VID_POS);
- wrmsr(0xC0010070, msr);
-
- /* read F3xD8[VSRampTime] */
- dtemp = pci_read_config32(dev, 0xD8);
- vsTimecode = (u8) ((dtemp >> VS_RAMP_T) & 0x7);
- vsTime = (int)timeTable[vsTimecode];
- do {
- coreDelay();
- vsTime -= 40;
- } while (vsTime > 0);
- }
- } else if (currentVid > targetVid) {
- while (currentVid > targetVid) {
- currentVid--;
- if (isNb)
- msr.lo = (msr.lo & NB_VID_MASK_OFF) | (currentVid << NB_VID_POS);
- else
- msr.lo = (msr.lo & CPU_VID_MASK_OFF) | (currentVid << CPU_VID_POS);
- wrmsr(0xC0010070, msr);
-
- /* read F3xD8[VSRampTime] */
- dtemp = pci_read_config32(dev, 0xD8);
- vsTimecode = (u8) ((dtemp >> VS_RAMP_T) & 0x7);
- vsTime = (int)timeTable[vsTimecode];
- do {
- coreDelay();
- vsTime -= 40;
- } while (vsTime > 0);
- }
- }
- } else { /* SVI, slam VID */
- if (isNb)
- msr.lo = (msr.lo & NB_VID_MASK_OFF) | (targetVid << NB_VID_POS);
- else
- msr.lo = (msr.lo & CPU_VID_MASK_OFF) | (targetVid << CPU_VID_POS);
- wrmsr(0xC0010070, msr);
-
- /* read F3xD8[VSRampTime] */
- dtemp = pci_read_config32(dev, 0xD8);
- vsTimecode = (u8) ((dtemp >> VS_RAMP_T) & 0x7);
- vsTime = (int)timeTable[vsTimecode];
- do {
- coreDelay();
- vsTime -= 40;
- } while (vsTime > 0);
- }
}
static u32 needs_NB_COF_VID_update(void)
@@ -633,8 +594,8 @@ static u32 needs_NB_COF_VID_update(void)
for (i = 0; i < nodes; i++) {
u32 cpuRev = mctGetLogicalCPUID(i) ;
u32 nbCofVidUpdateDefined = (cpuRev & (AMD_FAM10_LT_D));
- if (nbCofVidUpdateDefined
- && (pci_read_config32(NODE_PCI(i, 3), 0x1FC)
+ if (nbCofVidUpdateDefined
+ && (pci_read_config32(NODE_PCI(i, 3), 0x1FC)
& NB_COF_VID_UPDATE_MASK)) {
nb_cof_vid_update = 1;
break;
@@ -647,31 +608,29 @@ static u32 init_fidvid_core(u32 nodeid, u32 coreid)
{
device_t dev;
u32 vid_max;
- u32 fid_max=0;
+ u32 fid_max = 0;
u8 nb_cof_vid_update = needs_NB_COF_VID_update();
u8 pvimode;
u32 reg1fc;
/* Steps 1-6 of BIOS NB COF and VID Configuration
- * for SVI and Single-Plane PVI Systems.
+ * for SVI and Single-Plane PVI Systems. BKDG 2.4.2.9 #31116 rev 3.48
*/
dev = NODE_PCI(nodeid, 3);
- pvimode = (pci_read_config32(dev, 0xA0) >> 8) & 1;
+ pvimode = pci_read_config32(dev, PW_CTL_MISC) & PVI_MODE;
reg1fc = pci_read_config32(dev, 0x1FC);
if (nb_cof_vid_update) {
- if (pvimode) {
- vid_max = (reg1fc >> 7) & 0x7F;
- fid_max = (reg1fc >> 2) & 0x1F;
+ vid_max = (reg1fc & SINGLE_PLANE_NB_VID_MASK ) >> SINGLE_PLANE_NB_VID_SHIFT ;
+ fid_max = (reg1fc & SINGLE_PLANE_NB_FID_MASK ) >> SINGLE_PLANE_NB_FID_SHIFT ;
- /* write newNbVid to P-state Reg's NbVid always if NbVidUpdatedAll=1 */
- fixPsNbVidBeforeWR(vid_max, coreid);
- } else { /* SVI */
- vid_max = ((reg1fc >> 7) & 0x7F) - ((reg1fc >> 17) & 0x1F);
- fid_max = ((reg1fc >> 2) & 0x1F) + ((reg1fc >> 14) & 0x7);
- transitionVid(vid_max, dev, IS_NB);
+ if (!pvimode) { /* SVI, dual power plane */
+ vid_max = vid_max - ((reg1fc & DUAL_PLANE_NB_VID_OFF_MASK ) >> DUAL_PLANE_NB_VID_SHIFT );
+ fid_max = fid_max + ((reg1fc & DUAL_PLANE_NB_FID_OFF_MASK ) >> DUAL_PLANE_NB_FID_SHIFT );
}
+ /* write newNbVid to P-state Reg's NbVid always if NbVidUpdatedAll=1 */
+ fixPsNbVidBeforeWR(vid_max, coreid,dev,pvimode);
/* fid setup is handled by the BSP at the end. */
@@ -691,7 +650,7 @@ static void init_fidvid_ap(u32 bsp_apicid, u32 apicid, u32 nodeid, u32 coreid)
printk(BIOS_DEBUG, "FIDVID on AP: %02x\n", apicid);
- send = init_fidvid_core(nodeid,coreid);
+ send = init_fidvid_core(nodeid,coreid);
send |= (apicid << 24); // ap apicid
// Send signal to BSP about this AP max fid
@@ -812,21 +771,6 @@ static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll)
} while (msr.lo != StartupPstate);
}
-static void set_p0(void)
-{
- msr_t msr;
-
- // Transition P0 for calling core.
- msr = rdmsr(0xC0010062);
- msr.lo = (msr.lo & ~0x07);
- wrmsr(0xC0010062, msr);
-
- /* Wait for P0 to set. */
- do {
- msr = rdmsr(0xC0010063);
- } while (msr.lo != 0);
-}
-
static void finalPstateChange(void)
{
/* Enble P0 on all cores for best performance.
@@ -834,7 +778,7 @@ static void finalPstateChange(void)
* It is safe since they will be in C1 halt
* most of the time anyway.
*/
- set_p0();
+ set_pstate(0);
}
static void init_fidvid_stage2(u32 apicid, u32 nodeid)
diff --git a/src/northbridge/amd/amdht/AsPsDefs.h b/src/northbridge/amd/amdht/AsPsDefs.h
index 0f6db9fc75..4c327e971c 100644
--- a/src/northbridge/amd/amdht/AsPsDefs.h
+++ b/src/northbridge/amd/amdht/AsPsDefs.h
@@ -231,6 +231,16 @@
/* F3x1FC Product Information Register */
#define NB_COF_VID_UPDATE_MASK 1 /* for CPU rev <= C */
+#define SINGLE_PLANE_NB_FID_MASK 0x007c/* for CPU rev <= C */
+#define SINGLE_PLANE_NB_FID_SHIFT 2/* for CPU rev <= C */
+#define SINGLE_PLANE_NB_VID_MASK 0x3f80/* for CPU rev <= C */
+#define SINGLE_PLANE_NB_VID_SHIFT 7/* for CPU rev <= C */
+
+#define DUAL_PLANE_NB_FID_OFF_MASK 0x001c000/* for CPU rev <= C */
+#define DUAL_PLANE_NB_FID_SHIFT 14/* for CPU rev <= C */
+#define DUAL_PLANE_NB_VID_OFF_MASK 0x3e0000/* for CPU rev <= C */
+#define DUAL_PLANE_NB_VID_SHIFT 17/* for CPU rev <= C */
+
#define NM_PS_REG 5 /* number of P-state MSR registers */
@@ -266,4 +276,9 @@
#define GH_REV_A2 0x4 /* GH Rev A2 logical ID, Upper half */
+#define TSC_MSR 0x10
+#define CUR_PSTATE_MSR 0xc0010063
+
+#define WAIT_PSTATE_TIMEOUT 80000000 /* 0.1 s , unit : 1.25 ns */
+
#endif
diff --git a/src/northbridge/amd/amdmct/wrappers/mcti_d.c b/src/northbridge/amd/amdmct/wrappers/mcti_d.c
index 0ef60acecd..584a220864 100644
--- a/src/northbridge/amd/amdmct/wrappers/mcti_d.c
+++ b/src/northbridge/amd/amdmct/wrappers/mcti_d.c
@@ -339,9 +339,6 @@ static void mctHookAfterDramInit(void)
{
}
-static void coreDelay (void);
-
-
#if (CONFIG_DIMM_SUPPORT & 0x000F)==0x0005 /* AMD_FAM10_DDR3 */
/* Erratum 350 */
static void vErrata350(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTstat)
@@ -408,10 +405,10 @@ static void vErrata350(struct MCTStatStruc *pMCTstat, struct DCTStatStruc *pDCTs
static void vErratum372(struct DCTStatStruc *pDCTstat)
{
msr_t msr = rdmsr(NB_CFG_MSR);
-
+
int nbPstate1supported = ! (msr.hi && (1 << (NB_GfxNbPstateDis -32))) ;
- // is this the right way to check for NB pstate 1 or DDR3-1333 ?
+ // is this the right way to check for NB pstate 1 or DDR3-1333 ?
if (((pDCTstat->PresetmaxFreq==1333)||(nbPstate1supported))
&&(!pDCTstat->GangedMode)) {
/* DisableCf8ExtCfg */
@@ -423,14 +420,14 @@ static void vErratum372(struct DCTStatStruc *pDCTstat)
static void vErratum414(struct DCTStatStruc *pDCTstat)
{
int dct=0;
- for(; dct < 2 ; dct++)
+ for(; dct < 2 ; dct++)
{
- int dRAMConfigHi = Get_NB32(pDCTstat->dev_dct,0x94 + (0x100 * dct));
+ int dRAMConfigHi = Get_NB32(pDCTstat->dev_dct,0x94 + (0x100 * dct));
int powerDown = dRAMConfigHi && (1 << PowerDownEn ) ;
int ddr3 = dRAMConfigHi && (1 << Ddr3Mode ) ;
int dRAMMRS = Get_NB32(pDCTstat->dev_dct,0x84 + (0x100 * dct));
int pchgPDModeSel = dRAMMRS && (1 << PchgPDModeSel ) ;
- if (powerDown && ddr3 && pchgPDModeSel )
+ if (powerDown && ddr3 && pchgPDModeSel )
{
Set_NB32(pDCTstat->dev_dct,0x84 + (0x100 * dct), dRAMMRS & ~(1 << PchgPDModeSel) );
}