mb/google/guybrush: Move GSC_SOC_INT_L from GPIO_3 to GPIO_85

GSC_SOC_INT_L gpio is used by Google Security Chip (GSC) to interrupt
SoC when the SoC is in S0 state. Hence use GPIO_85 which is in S0 domain
and save the GPIO_3 in S5 domain for other use-cases. This move applies
to all board except:
* Guybrush
* Nipperkin board version 1

Update the GPIO configuration, device tree configuration accordingly.

BUG=b:202992077
TEST=Build and boot to OS in Guybrush and Nipperkin. Ensure that the SoC
<-> TPM communication is working fine.

Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I019f10f2f457ab81bcff77ce8ca609b2b40cb2ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>

10 files changed, 74 insertions, 9 deletions

diff --git a/src/mainboard/google/guybrush/mainboard.c b/src/mainboard/google/guybrush/mainboard.c
index 39ef2a0795..b2d669c443 100644
--- a/src/mainboard/google/guybrush/mainboard.c
+++ b/src/mainboard/google/guybrush/mainboard.c
@@ -112,10 +112,15 @@ static void mainboard_configure_gpios(void)
 					  override_num_gpios);
 }
 
+void __weak variant_devtree_update(void)
+{
+}
+
 static void mainboard_init(void *chip_info)
 {
 	mainboard_configure_gpios();
 	mainboard_ec_init();
+	variant_devtree_update();
 }
 
 static void mainboard_write_blken(void)
diff --git a/src/mainboard/google/guybrush/variants/baseboard/devicetree.cb b/src/mainboard/google/guybrush/variants/baseboard/devicetree.cb
index 381cbaaab8..8a9543da2b 100644
--- a/src/mainboard/google/guybrush/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/guybrush/variants/baseboard/devicetree.cb
@@ -341,8 +341,8 @@ chip soc/amd/cezanne
 		chip drivers/i2c/tpm
 			register "hid" = ""GOOG0005""
 			register "desc" = ""Cr50 TPM""
-			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_3)"
-			device i2c 50 on end
+			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_85)"
+			device i2c 50 alias cr50 on end
 		end
 	end
 
diff --git a/src/mainboard/google/guybrush/variants/baseboard/gpio.c b/src/mainboard/google/guybrush/variants/baseboard/gpio.c
index 7062f42dd5..94ed74cff5 100644
--- a/src/mainboard/google/guybrush/variants/baseboard/gpio.c
+++ b/src/mainboard/google/guybrush/variants/baseboard/gpio.c
@@ -17,8 +17,8 @@ static const struct soc_amd_gpio base_gpio_table[] = {
 	PAD_NF(GPIO_1, SYS_RESET_L, PULL_NONE),
 	/* WAKE_L */
 	PAD_NF_SCI(GPIO_2, WAKE_L, PULL_NONE, EDGE_LOW),
-	/* GSC_SOC_INT_L */
-	PAD_INT(GPIO_3, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
+	/* Unused */
+	PAD_NC(GPIO_3),
 	/* SOC_PEN_DETECT_ODL */
 	PAD_WAKE(GPIO_4, PULL_NONE, EDGE_HIGH, S0i3),
 	/* SD_AUX_RESET_L  */
@@ -95,8 +95,8 @@ static const struct soc_amd_gpio base_gpio_table[] = {
 	/* GPIO_77 - GPIO_83: Not available */
 	/* EC_SOC_INT_ODL */
 	PAD_GPI(GPIO_84, PULL_NONE),
-	/* Unused */
-	PAD_NC(GPIO_85),
+	/* GSC_SOC_INT_L */
+	PAD_INT(GPIO_85, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
 	/* ESPI_SOC_CLK */
 	PAD_NF(GPIO_86, SPI_CLK, PULL_NONE),
 	/* RAM_ID_1 / DEV_BEEP_DATA */
@@ -200,14 +200,16 @@ static const struct soc_amd_gpio early_gpio_table[] = {
 	PAD_GPO(GPIO_24, LOW),
 
 /* Enable ESPI, GSC Interrupt & I2C Communication */
-	/* GSC_SOC_INT_L */
-	PAD_INT(GPIO_3, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
+	/* Unused */
+	PAD_NC(GPIO_3),
 	/* I2C3_SCL */
 	PAD_NF(GPIO_19, I2C3_SCL, PULL_NONE),
 	/* I2C3_SDA */
 	PAD_NF(GPIO_20, I2C3_SDA, PULL_NONE),
 	/* ESPI_CS_L */
 	PAD_NF(GPIO_30, ESPI_CS_L, PULL_NONE),
+	/* GSC_SOC_INT_L */
+	PAD_INT(GPIO_85, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
 	/* ESPI_SOC_CLK */
 	PAD_NF(GPIO_86, SPI_CLK, PULL_NONE),
 	/* ESPI1_DATA0 */
diff --git a/src/mainboard/google/guybrush/variants/baseboard/include/baseboard/variants.h b/src/mainboard/google/guybrush/variants/baseboard/include/baseboard/variants.h
index 84e3d39644..0fe0b3bae0 100644
--- a/src/mainboard/google/guybrush/variants/baseboard/include/baseboard/variants.h
+++ b/src/mainboard/google/guybrush/variants/baseboard/include/baseboard/variants.h
@@ -60,4 +60,5 @@ enum dxio_port_id {
 
 uint8_t variant_sd_aux_reset_gpio(void);
 
+void variant_devtree_update(void);
 #endif /* __BASEBOARD_VARIANTS_H__ */
diff --git a/src/mainboard/google/guybrush/variants/baseboard/tpm_tis.c b/src/mainboard/google/guybrush/variants/baseboard/tpm_tis.c
index 4550728afb..aa8eaa0e6a 100644
--- a/src/mainboard/google/guybrush/variants/baseboard/tpm_tis.c
+++ b/src/mainboard/google/guybrush/variants/baseboard/tpm_tis.c
@@ -1,9 +1,16 @@
 /* SPDX-License-Identifier: GPL-2.0-or-later */
 
+#include <boardid.h>
 #include <security/tpm/tis.h>
 #include <soc/gpio.h>
 
 int tis_plat_irq_status(void)
 {
-	return gpio_interrupt_status(GPIO_3);
+	gpio_t irq_gpio = GPIO_85;
+	uint32_t board_ver = board_id();
+
+	if (CONFIG(BOARD_GOOGLE_GUYBRUSH) || (CONFIG(BOARD_GOOGLE_NIPPERKIN) && board_ver == 1))
+		irq_gpio = GPIO_3;
+
+	return gpio_interrupt_status(irq_gpio);
 }
diff --git a/src/mainboard/google/guybrush/variants/guybrush/gpio.c b/src/mainboard/google/guybrush/variants/guybrush/gpio.c
index 886c1cc9b7..109ca0e018 100644
--- a/src/mainboard/google/guybrush/variants/guybrush/gpio.c
+++ b/src/mainboard/google/guybrush/variants/guybrush/gpio.c
@@ -19,6 +19,10 @@ static const struct soc_amd_gpio bid1_ramstage_gpio_table[] = {
 	PAD_GPI(GPIO_74, PULL_NONE),
 	/* EN_PP5000_PEN */
 	PAD_GPO(GPIO_5, HIGH),
+	/* GSC_SOC_INT_L */
+	PAD_INT(GPIO_3, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
+	/* Unused */
+	PAD_NC(GPIO_85),
 };
 
 /* This table is used by guybrush variant with board version >= 2. */
@@ -27,6 +31,10 @@ static const struct soc_amd_gpio bid2_ramstage_gpio_table[] = {
 	PAD_GPO(GPIO_5, HIGH),
 	/* SD_AUX_RESET_L */
 	PAD_GPO(GPIO_69, HIGH),
+	/* GSC_SOC_INT_L */
+	PAD_INT(GPIO_3, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
+	/* Unused */
+	PAD_NC(GPIO_85),
 };
 
 static const struct soc_amd_gpio override_early_gpio_table[] = {
@@ -35,6 +43,10 @@ static const struct soc_amd_gpio override_early_gpio_table[] = {
 	PAD_GPO(GPIO_69, LOW),
 	/* BID == 1: SD_AUX_RESET_L */
 	PAD_GPO(GPIO_70, LOW),
+	/* GSC_SOC_INT_L */
+	PAD_INT(GPIO_3, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
+	/* Unused */
+	PAD_NC(GPIO_85),
 };
 
 /* This table is used by guybrush variant with board version < 2. */
diff --git a/src/mainboard/google/guybrush/variants/guybrush/overridetree.cb b/src/mainboard/google/guybrush/variants/guybrush/overridetree.cb
index aefdd3d605..92b19802d8 100644
--- a/src/mainboard/google/guybrush/variants/guybrush/overridetree.cb
+++ b/src/mainboard/google/guybrush/variants/guybrush/overridetree.cb
@@ -154,6 +154,15 @@ chip soc/amd/cezanne
 		end
 	end # I2C2
 
+	device ref i2c_3 on
+		chip drivers/i2c/tpm
+			register "hid" = ""GOOG0005""
+			register "desc" = ""Cr50 TPM""
+			register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_3)"
+			device i2c 50 on end
+		end
+	end # I2C3
+
 	device ref uart_1 on
 		chip drivers/uart/acpi
 			register "name" = ""CRFP""
diff --git a/src/mainboard/google/guybrush/variants/nipperkin/Makefile.inc b/src/mainboard/google/guybrush/variants/nipperkin/Makefile.inc
index d147aa9a49..d6cd2623a2 100644
--- a/src/mainboard/google/guybrush/variants/nipperkin/Makefile.inc
+++ b/src/mainboard/google/guybrush/variants/nipperkin/Makefile.inc
@@ -9,4 +9,6 @@ bootblock-y += variant.c
 romstage-y += variant.c
 ramstage-y += variant.c
 
+ramstage-y += ramstage.c
+
 subdirs-y += ./memory
diff --git a/src/mainboard/google/guybrush/variants/nipperkin/gpio.c b/src/mainboard/google/guybrush/variants/nipperkin/gpio.c
index 2699f2a1cf..9a098dbb66 100644
--- a/src/mainboard/google/guybrush/variants/nipperkin/gpio.c
+++ b/src/mainboard/google/guybrush/variants/nipperkin/gpio.c
@@ -18,6 +18,10 @@ static const struct soc_amd_gpio bid1_override_gpio_table[] = {
 	PAD_GPO(GPIO_5, HIGH),
 	/* SD_AUX_RESET_L */
 	PAD_GPO(GPIO_69, HIGH),
+	/* GSC_SOC_INT_L */
+	PAD_INT(GPIO_3, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
+	/* Unused */
+	PAD_NC(GPIO_85),
 };
 
 /* This table is used by nipperkin variant with board version >= 2. */
@@ -33,6 +37,8 @@ static const struct soc_amd_gpio bid2_override_gpio_table[] = {
 };
 
 static const struct soc_amd_gpio override_early_gpio_table[] = {
+	/* BID == 1: GSC_SOC_INT_L, BID > 1: Unused */
+	PAD_INT(GPIO_3, PULL_NONE, EDGE_LOW, STATUS_DELIVERY),
 	PAD_NC(GPIO_18),
 	/* SD_AUX_RESET_L */
 	PAD_GPO(GPIO_69, LOW),
diff --git a/src/mainboard/google/guybrush/variants/nipperkin/ramstage.c b/src/mainboard/google/guybrush/variants/nipperkin/ramstage.c
new file mode 100644
index 0000000000..10428050f0
--- /dev/null
+++ b/src/mainboard/google/guybrush/variants/nipperkin/ramstage.c
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/variants.h>
+#include <boardid.h>
+#include <device/device.h>
+#include <drivers/i2c/tpm/chip.h>
+#include <soc/gpio.h>
+
+void variant_devtree_update(void)
+{
+	uint32_t board_ver = board_id();
+	const struct device *cr50_dev = DEV_PTR(cr50);
+	struct drivers_i2c_tpm_config *cfg;
+	struct acpi_gpio cr50_irq_gpio = ACPI_GPIO_IRQ_EDGE_LOW(GPIO_3);
+
+	if (board_ver > 1)
+		return;
+
+	cfg = config_of(cr50_dev);
+	cfg->irq_gpio = cr50_irq_gpio;
+}