diff options
| author | Mario Scheithauer <mario.scheithauer@siemens.com> | 2022-11-08 14:03:00 +0100 |
|---|---|---|
| committer | Martin L Roth <gaumless@gmail.com> | 2022-11-24 06:00:38 +0000 |
| commit | 969531b6d8c015c329f96840a1337d6b7e9c5595 (patch) | |
| tree | 0f1e5dccc203602c7fa182b4a9165cf02cb3cf62 /src | |
| parent | 1a97c89d7b22a92992131032b0cd587de9f33d64 (diff) | |
mb/siemens/mc_ehl2: Enable Marvell PHY 88E1512 driver
This mainboard has three Marvel PHYs connected to the internal SOC GbE
controllers. The default LED status after HW reset of this PHYs shows a
different mode than what is needed. LED[2] is not connected on this
mainboard.
This patch sets the following LED status:
LED[0] - 7 = On - 1000 Mbps Link, Off - Else
LED[1] - 1 = On - Link, Blink - Activity, Off - No Link
LED[2] - not connected
TEST=Try different register values to verify LED feature.
Change-Id: I51d817bc720bf787279777f503efdc17dbb1274d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69387
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src')
| -rw-r--r-- | src/mainboard/siemens/mc_ehl/variants/mc_ehl2/Kconfig | 1 | ||||
| -rw-r--r-- | src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb | 42 |
2 files changed, 40 insertions, 3 deletions
diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/Kconfig b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/Kconfig index 00875fbb25..9e3e9dccb3 100644 --- a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/Kconfig +++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/Kconfig @@ -6,6 +6,7 @@ config BOARD_SPECIFIC_OPTIONS select DRIVER_INTEL_I210 select SOC_INTEL_COMMON_BLOCK_LPC_COMB_ENABLE select EHL_TSN_DRIVER + select DRIVERS_ETH_PHY_M88E1512 config FMDFILE default "src/mainboard/\$(CONFIG_MAINBOARD_DIR)/mc_ehl.fmd" diff --git a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb index 4dd062cb55..b8ea1b6213 100644 --- a/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb +++ b/src/mainboard/siemens/mc_ehl/variants/mc_ehl2/devicetree.cb @@ -181,12 +181,48 @@ chip soc/intel/elkhartlake device pci 1c.6 on end # RP7 (pcie3 multi VC) device pci 1d.0 off end # Intel PSE IPC (local host to PSE) - device pci 1d.1 on end # Intel PSE Time-Sensitive Networking GbE 0 - device pci 1d.2 on end # Intel PSE Time-Sensitive Networking GbE 1 + device pci 1d.1 on # Intel PSE Time-Sensitive Networking GbE 0 + # Enable external Marvell PHY 88E1512 + chip drivers/net/phy/m88e1512 + register "configure_leds" = "true" + # LED[0]: On - 1000 Mbps Link, Off - Else + register "led_0_ctrl" = "7" + # LED[1]: On - Link, Blink - Activity, Off - No Link + register "led_1_ctrl" = "1" + device mdio 0 on # PHY address + ops m88e1512_ops + end + end + end + device pci 1d.2 on # Intel PSE Time-Sensitive Networking GbE 1 + # Enable external Marvell PHY 88E1512 + chip drivers/net/phy/m88e1512 + register "configure_leds" = "true" + # LED[0]: On - 1000 Mbps Link, Off - Else + register "led_0_ctrl" = "7" + # LED[1]: On - Link, Blink - Activity, Off - No Link + register "led_1_ctrl" = "1" + device mdio 1 on # PHY address + ops m88e1512_ops + end + end + end device pci 1e.0 on end # UART0 device pci 1e.1 on end # UART1 - device pci 1e.4 on end # PCH Time-Sensitive Networking GbE + device pci 1e.4 on # PCH Time-Sensitive Networking GbE + # Enable external Marvell PHY 88E1512 + chip drivers/net/phy/m88e1512 + register "configure_leds" = "true" + # LED[0]: On - 1000 Mbps Link, Off - Else + register "led_0_ctrl" = "7" + # LED[1]: On - Link, Blink - Activity, Off - No Link + register "led_1_ctrl" = "1" + device mdio 1 on # PHY address + ops m88e1512_ops + end + end + end device pci 1f.0 on # eSPI Interface chip drivers/pc80/tpm |