diff options
| author | David Wu <david_wu@quanta.corp-partner.google.com> | 2022-10-05 15:33:27 +0800 |
|---|---|---|
| committer | Nick Vaccaro <nvaccaro@google.com> | 2022-10-10 22:46:00 +0000 |
| commit | 91fb8ca7e7d2bef1018d5dfbe0c20efdf9441ae1 (patch) | |
| tree | d0b086261d29f5e4ce276da030576840eac8963b /src | |
| parent | e8bb6d2b16acbe4c583905d17c32172938006100 (diff) | |
brya: add new zydron variant
Add a new zydron variant, which is a variant of brya's skolas
baseboard. currently copy the variant file from kano.
BUG=b:250787251
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I49a41678568daef80b7cd1e3ed60ce4763034f9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68130
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src')
13 files changed, 887 insertions, 1 deletions
diff --git a/src/mainboard/google/brya/Kconfig b/src/mainboard/google/brya/Kconfig index c1acc37f7d..dbf6a02091 100644 --- a/src/mainboard/google/brya/Kconfig +++ b/src/mainboard/google/brya/Kconfig @@ -144,6 +144,7 @@ config DRIVER_TPM_I2C_BUS default 0x0 if BOARD_GOOGLE_PUJJO default 0x0 if BOARD_GOOGLE_XIVU default 0x0 if BOARD_GOOGLE_YAVIKS + default 0x1 if BOARD_GOOGLE_ZYDRON config DRIVER_TPM_I2C_ADDR hex @@ -210,6 +211,7 @@ config MAINBOARD_PART_NUMBER default "Gaelin4ADL" if BOARD_GOOGLE_GAELIN4ADL default "Yaviks" if BOARD_GOOGLE_YAVIKS default "Lisbon" if BOARD_GOOGLE_LISBON + default "Zydron" if BOARD_GOOGLE_ZYDRON config VARIANT_DIR default "brya0" if BOARD_GOOGLE_BRYA0 @@ -248,6 +250,7 @@ config VARIANT_DIR default "gaelin" if BOARD_GOOGLE_GAELIN4ADL default "yaviks" if BOARD_GOOGLE_YAVIKS default "lisbon" if BOARD_GOOGLE_LISBON + default "zydron" if BOARD_GOOGLE_ZYDRON config VBOOT select VBOOT_EARLY_EC_SYNC if !BOARD_GOOGLE_BASEBOARD_NISSA @@ -282,7 +285,7 @@ config USE_PM_ACPI_TIMER choice prompt "Cache as RAM (CAR) setup configuration to use" - default USE_ADL_NEM if BOARD_GOOGLE_PRIMUS4ES || BOARD_GOOGLE_GIMBLE4ES || BOARD_GOOGLE_REDRIX4ES || BOARD_GOOGLE_TAEKO4ES || BOARD_GOOGLE_ANAHERA4ES || BOARD_GOOGLE_TANIKS || BOARD_GOOGLE_NIVVIKS || BOARD_GOOGLE_NEREID || BOARD_GOOGLE_CRAASK || BOARD_GOOGLE_SKOLAS || BOARD_GOOGLE_SKOLAS4ES || BOARD_GOOGLE_JOXER || BOARD_GOOGLE_PUJJO || BOARD_GOOGLE_XIVU || BOARD_GOOGLE_YAVIKS + default USE_ADL_NEM if BOARD_GOOGLE_PRIMUS4ES || BOARD_GOOGLE_GIMBLE4ES || BOARD_GOOGLE_REDRIX4ES || BOARD_GOOGLE_TAEKO4ES || BOARD_GOOGLE_ANAHERA4ES || BOARD_GOOGLE_TANIKS || BOARD_GOOGLE_NIVVIKS || BOARD_GOOGLE_NEREID || BOARD_GOOGLE_CRAASK || BOARD_GOOGLE_SKOLAS || BOARD_GOOGLE_SKOLAS4ES || BOARD_GOOGLE_JOXER || BOARD_GOOGLE_PUJJO || BOARD_GOOGLE_XIVU || BOARD_GOOGLE_YAVIKS || BOARD_GOOGLE_ZYDRON default USE_ADL_ENEM config USE_ADL_ENEM diff --git a/src/mainboard/google/brya/Kconfig.name b/src/mainboard/google/brya/Kconfig.name index ec1b6023f6..3c98dca678 100644 --- a/src/mainboard/google/brya/Kconfig.name +++ b/src/mainboard/google/brya/Kconfig.name @@ -273,3 +273,11 @@ config BOARD_GOOGLE_LISBON bool "-> Lisbon" select BOARD_GOOGLE_BASEBOARD_BRASK select DRIVERS_GENESYSLOGIC_GL9750 + +config BOARD_GOOGLE_ZYDRON + bool "-> Zydron" + select BOARD_GOOGLE_BASEBOARD_SKOLAS + select DRIVERS_I2C_MAX98373 + select DRIVERS_I2C_NAU8825 + select DRIVERS_INTEL_MIPI_CAMERA + select SOC_INTEL_COMMON_BLOCK_IPU diff --git a/src/mainboard/google/brya/variants/zydron/Makefile.inc b/src/mainboard/google/brya/variants/zydron/Makefile.inc new file mode 100644 index 0000000000..66dcf7e1ac --- /dev/null +++ b/src/mainboard/google/brya/variants/zydron/Makefile.inc @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0-only +bootblock-y += gpio.c + +romstage-y += gpio.c + +ramstage-y += gpio.c +ramstage-$(CONFIG_FW_CONFIG) += variant.c +ramstage-$(CONFIG_FW_CONFIG) += fw_config.c +ramstage-y += ramstage.c diff --git a/src/mainboard/google/brya/variants/zydron/fw_config.c b/src/mainboard/google/brya/variants/zydron/fw_config.c new file mode 100644 index 0000000000..631a908a9b --- /dev/null +++ b/src/mainboard/google/brya/variants/zydron/fw_config.c @@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <bootstate.h> +#include <console/console.h> +#include <fw_config.h> +#include <gpio.h> + +static const struct pad_config dmic_enable_pads[] = { + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF3), /* DMIC_CLK0_R */ + PAD_CFG_NF(GPP_R5, NONE, DEEP, NF3), /* DMIC_DATA0_R */ + PAD_CFG_NF(GPP_R6, NONE, DEEP, NF3), /* DMIC_CLK1_R */ + PAD_CFG_NF(GPP_R7, NONE, DEEP, NF3), /* DMIC_DATA1_R */ +}; + +static const struct pad_config dmic_disable_pads[] = { + PAD_NC(GPP_R4, NONE), + PAD_NC(GPP_R5, NONE), + PAD_NC(GPP_R6, NONE), + PAD_NC(GPP_R7, NONE), +}; + +static const struct pad_config i2s_enable_pads[] = { + PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2), /* I2S_HP_SCLK_R */ + PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2), /* I2S_HP_SFRM_R */ + PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2), /* I2S_PCH_TX_HP_RX_STRAP */ + PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2), /* I2S_PCH_RX_HP_TX */ + PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4), /* I2S_SPKR_SCLK_R */ + PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4), /* I2S_SPKR_SFRM_R */ + PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4), /* I2S_PCH_TX_SPKR_RX_R */ + PAD_CFG_NF(GPP_S3, NONE, DEEP, NF4), /* I2S_PCH_RX_SPKR_TX */ +}; + +static const struct pad_config i2s_disable_pads[] = { + PAD_NC(GPP_R0, NONE), + PAD_NC(GPP_R1, NONE), + PAD_NC(GPP_R2, NONE), + PAD_NC(GPP_R3, NONE), + PAD_NC(GPP_S0, NONE), + PAD_NC(GPP_S1, NONE), + PAD_NC(GPP_S2, NONE), + PAD_NC(GPP_S3, NONE), +}; + +static const struct pad_config bt_i2s_enable_pads[] = { + PAD_CFG_NF(GPP_VGPIO_30, NONE, DEEP, NF3), /* BT_I2S_BCLK */ + PAD_CFG_NF(GPP_VGPIO_31, NONE, DEEP, NF3), /* BT_I2S_SYNC */ + PAD_CFG_NF(GPP_VGPIO_32, NONE, DEEP, NF3), /* BT_I2S_SDO */ + PAD_CFG_NF(GPP_VGPIO_33, NONE, DEEP, NF3), /* BT_I2S_SDI */ + PAD_CFG_NF(GPP_VGPIO_34, NONE, DEEP, NF1), /* SSP2_SCLK */ + PAD_CFG_NF(GPP_VGPIO_35, NONE, DEEP, NF1), /* SSP2_SFRM */ + PAD_CFG_NF(GPP_VGPIO_36, NONE, DEEP, NF1), /* SSP_TXD */ + PAD_CFG_NF(GPP_VGPIO_37, NONE, DEEP, NF1), /* SSP_RXD */ +}; + +static const struct pad_config bt_i2s_disable_pads[] = { + PAD_NC(GPP_VGPIO_30, NONE), + PAD_NC(GPP_VGPIO_31, NONE), + PAD_NC(GPP_VGPIO_32, NONE), + PAD_NC(GPP_VGPIO_33, NONE), + PAD_NC(GPP_VGPIO_34, NONE), + PAD_NC(GPP_VGPIO_35, NONE), + PAD_NC(GPP_VGPIO_36, NONE), + PAD_NC(GPP_VGPIO_37, NONE), +}; + +static void fw_config_handle(void *unused) +{ + if (!fw_config_is_provisioned() || fw_config_probe(FW_CONFIG(AUDIO, AUDIO_UNKNOWN))) { + printk(BIOS_INFO, "Disable audio related GPIO pins.\n"); + gpio_configure_pads(i2s_disable_pads, ARRAY_SIZE(i2s_disable_pads)); + gpio_configure_pads(dmic_disable_pads, ARRAY_SIZE(dmic_disable_pads)); + gpio_configure_pads(bt_i2s_disable_pads, ARRAY_SIZE(bt_i2s_disable_pads)); + return; + } + + if (fw_config_probe(FW_CONFIG(AUDIO, MAX98373_NAU88L25B_I2S))) { + printk(BIOS_INFO, "Configure audio over I2S with MAX98373 NAU88L25B.\n"); + gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads)); + gpio_configure_pads(i2s_enable_pads, ARRAY_SIZE(i2s_enable_pads)); + printk(BIOS_INFO, "BT offload enabled\n"); + gpio_configure_pads(bt_i2s_enable_pads, ARRAY_SIZE(bt_i2s_enable_pads)); + } else { + printk(BIOS_INFO, "BT offload disabled\n"); + gpio_configure_pads(bt_i2s_disable_pads, ARRAY_SIZE(bt_i2s_disable_pads)); + } +} +BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL); diff --git a/src/mainboard/google/brya/variants/zydron/gpio.c b/src/mainboard/google/brya/variants/zydron/gpio.c new file mode 100644 index 0000000000..4dee174bbc --- /dev/null +++ b/src/mainboard/google/brya/variants/zydron/gpio.c @@ -0,0 +1,196 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> +#include <soc/gpio.h> + +/* Pad configuration in ramstage */ +static const struct pad_config override_gpio_table[] = { + /* A6 : ESPI_ALERT1# ==> NC */ + PAD_NC(GPP_A6, NONE), + /* A7 : SRCCLK_OE7# ==> NC */ + PAD_NC(GPP_A7, NONE), + /* A8 : SRCCLKREQ7# ==> NC */ + PAD_NC(GPP_A8, NONE), + /* A12 : SATAXPCIE1 ==> NC */ + PAD_NC(GPP_A12, NONE), + /* A15 : USB_OC2# ==> NC */ + PAD_NC(GPP_A15, NONE), + /* A19 : DDSP_HPD1 ==> NC */ + PAD_NC(GPP_A19, NONE), + /* A20 : DDSP_HPD2 ==> NC */ + PAD_NC(GPP_A20, NONE), + /* A21 : DDPC_CTRCLK ==> NC */ + PAD_NC(GPP_A21, NONE), + /* A22 : DDPC_CTRLDATA ==> NC */ + PAD_NC(GPP_A22, NONE), + + /* D3 : ISH_GP3 ==> NC */ + PAD_NC_LOCK(GPP_D3, NONE, LOCK_CONFIG), + /* D5 : SRCCLKREQ0# ==> SSD_CLKREQ_ODL */ + PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1), + /* D6 : SRCCLKREQ1# ==> APU_PEN_DETECT_ODL */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_D6, NONE, PLTRST), + /* D7 : SRCCLKREQ2# ==> NC */ + PAD_NC(GPP_D7, NONE), + /* D8 : SRCCLKREQ3# ==> NC */ + PAD_NC(GPP_D8, NONE), + /* D16 : ISH_UART0_CTS# ==> PEN_PWR_EN */ + PAD_CFG_GPO_LOCK(GPP_D16, 1, LOCK_CONFIG), + /* D17 : UART1_RXD ==> APU_PEN_DETECT_ODL */ + PAD_CFG_GPI_SCI_LOCK(GPP_D17, NONE, EDGE_SINGLE, NONE, LOCK_CONFIG), + /* D18 : UART1_TXD ==> NC */ + PAD_NC_LOCK(GPP_D18, NONE, LOCK_CONFIG), + + /* E0 : SATAXPCIE0 ==> NC */ + PAD_NC(GPP_E0, NONE), + /* E3 : PROC_GP0 ==> SAR1_INT_L */ + PAD_CFG_GPI_APIC(GPP_E3, NONE, PLTRST, LEVEL, NONE), + /* E7 : PROC_GP1 ==> NC */ + PAD_NC(GPP_E7, NONE), + /* E10 : THC0_SPI1_CS# ==> NC */ + PAD_NC_LOCK(GPP_E10, NONE, LOCK_CONFIG), + /* E17 : THC0_SPI1_INT# ==> NC */ + PAD_NC_LOCK(GPP_E17, NONE, LOCK_CONFIG), + /* E22 : DDPA_CTRLCLK ==> NC */ + PAD_NC(GPP_E22, NONE), + /* E23 : DDPA_CTRLDATA ==> NC */ + PAD_NC(GPP_E23, NONE), + + /* F6 : CNV_PA_BLANKING ==> NC */ + PAD_NC(GPP_F6, NONE), + /* F21 : EXT_PWR_GATE2# ==> NC */ + PAD_NC(GPP_F21, NONE), + + /* H6 : I2C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF_LOCK(GPP_H6, NONE, NF1, LOCK_CONFIG), + /* H7 : I2C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF_LOCK(GPP_H7, NONE, NF1, LOCK_CONFIG), + /* H8 : I2C4_SDA ==> NC */ + PAD_NC(GPP_H8, NONE), + /* H9 : I2C4_SCL ==> NC */ + PAD_NC(GPP_H9, NONE), + /* H12 : I2C7_SDA ==> NC */ + PAD_NC_LOCK(GPP_H12, NONE, LOCK_CONFIG), + /* H13 : I2C7_SCL ==> NC */ + PAD_NC_LOCK(GPP_H13, NONE, LOCK_CONFIG), + /* H19 : SRCCLKREQ4# ==> NC */ + PAD_NC(GPP_H19, NONE), + /* H20 : IMGCLKOUT1 ==> NC */ + PAD_NC(GPP_H20, NONE), + /* H21 : IMGCLKOUT2 ==> NC */ + PAD_NC(GPP_H21, NONE), + /* H22 : IMGCLKOUT3 ==> NC */ + PAD_NC(GPP_H22, NONE), + /* H23 : SRCCLKREQ5# ==> NC */ + PAD_NC(GPP_H23, NONE), + + /* R4 : HDA_RST# ==> DMIC_CLK0_R */ + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF3), + /* R5 : HDA_SDI1 ==> DMIC_DATA0_R */ + PAD_CFG_NF(GPP_R5, NONE, DEEP, NF3), + /* R6 : I2S2_TXD ==> DMIC_CLK1_R */ + PAD_CFG_NF(GPP_R6, NONE, DEEP, NF3), + /* R7 : I2S2_RXD ==> DMIC_DATA1_R */ + PAD_CFG_NF(GPP_R7, NONE, DEEP, NF3), + + /* S0 : SNDW0_CLK ==> I2S1_SPKR_SCLK_R */ + PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4), + /* S1 : SNDW0_DATA ==> I2S1_SPKR_SFRM_R */ + PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4), + /* S2 : SNDW1_CLK ==> I2S1_PCH_TX_SPKR_RX_R */ + PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4), + /* S3 : SNDW1_DATA ==> I2S1_PCH_RX_SPKR_TX */ + PAD_CFG_NF(GPP_S3, NONE, DEEP, NF4), + + /* GPD11: LANPHYC ==> NC */ + PAD_NC(GPD11, NONE), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT), + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 0, DEEP), + /* + * D1 : ISH_GP1 ==> FP_RST_ODL + * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down. + * To ensure proper power sequencing for the FPMCU device, reset signal is driven low + * early on in bootblock, followed by enabling of power. Reset signal is deasserted + * later on in ramstage. Since reset signal is asserted in bootblock, it results in + * FPMCU not working after a S3 resume. This is a known issue. + */ + PAD_CFG_GPO(GPP_D1, 0, DEEP), + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + PAD_CFG_GPO(GPP_D2, 1, DEEP), + /* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */ + PAD_CFG_GPO(GPP_D11, 1, DEEP), + /* E0 : SATAXPCIE0 ==> NC */ + PAD_NC(GPP_E0, NONE), + /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_E13, NONE, DEEP), + /* E15 : RSVD_TP ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP), + /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_F18, NONE, DEEP), + /* H6 : I2C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1), + /* H7 : I2C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), + + /* CPU PCIe VGPIO for PEG60 */ + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_48, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_49, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_50, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_51, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_52, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_53, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_54, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_55, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_56, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_57, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_58, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_59, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_60, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_61, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_62, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_63, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_76, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_77, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_78, NONE, PLTRST, NF1), + PAD_CFG_NF_VWEN(GPP_vGPIO_PCIE_79, NONE, PLTRST, NF1), +}; + +static const struct pad_config romstage_gpio_table[] = { + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 1, DEEP), + + /* D1 : ISH_GP1 ==> FP_RST_ODL */ + PAD_CFG_GPO(GPP_D1, 0, DEEP), + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + PAD_CFG_GPO(GPP_D2, 0, DEEP), +}; + +const struct pad_config *variant_gpio_override_table(size_t *num) +{ + *num = ARRAY_SIZE(override_gpio_table); + return override_gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + +const struct pad_config *variant_romstage_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(romstage_gpio_table); + return romstage_gpio_table; +} diff --git a/src/mainboard/google/brya/variants/zydron/include/variant/ec.h b/src/mainboard/google/brya/variants/zydron/include/variant/ec.h new file mode 100644 index 0000000000..6f104d5da4 --- /dev/null +++ b/src/mainboard/google/brya/variants/zydron/include/variant/ec.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef __VARIANT_EC_H__ +#define __VARIANT_EC_H__ + +#include <baseboard/ec.h> + +/* Enable EC backed Keyboard Backlight in ACPI */ +#define EC_ENABLE_KEYBOARD_BACKLIGHT + +#endif diff --git a/src/mainboard/google/brya/variants/zydron/include/variant/gpio.h b/src/mainboard/google/brya/variants/zydron/include/variant/gpio.h new file mode 100644 index 0000000000..c4fe342621 --- /dev/null +++ b/src/mainboard/google/brya/variants/zydron/include/variant/gpio.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#endif diff --git a/src/mainboard/google/brya/variants/zydron/memory/Makefile.inc b/src/mainboard/google/brya/variants/zydron/memory/Makefile.inc new file mode 100644 index 0000000000..5bcbff8061 --- /dev/null +++ b/src/mainboard/google/brya/variants/zydron/memory/Makefile.inc @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# This is an auto-generated file. Do not edit!! +# Generated by: +# util/spd_tools/bin/part_id_gen ADL lp4x src/mainboard/google/brya/variants/zydron/memory src/mainboard/google/brya/variants/zydron/memory/mem_parts_used.txt + +SPD_SOURCES = +SPD_SOURCES += spd/lp4x/set-0/spd-1.hex # ID = 0(0b0000) Parts = MT53E512M32D1NP-046 WT:B, H54G46CYRBX267, K4U6E3S4AB-MGCL +SPD_SOURCES += spd/lp4x/set-0/spd-3.hex # ID = 1(0b0001) Parts = MT53E1G32D2NP-046 WT:B, H54G56CYRBX247, K4UBE3D4AB-MGCL diff --git a/src/mainboard/google/brya/variants/zydron/memory/dram_id.generated.txt b/src/mainboard/google/brya/variants/zydron/memory/dram_id.generated.txt new file mode 100644 index 0000000000..c5b528a9bf --- /dev/null +++ b/src/mainboard/google/brya/variants/zydron/memory/dram_id.generated.txt @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# This is an auto-generated file. Do not edit!! +# Generated by: +# util/spd_tools/bin/part_id_gen ADL lp4x src/mainboard/google/brya/variants/zydron/memory src/mainboard/google/brya/variants/zydron/memory/mem_parts_used.txt + +DRAM Part Name ID to assign +MT53E512M32D1NP-046 WT:B 0 (0000) +MT53E1G32D2NP-046 WT:B 1 (0001) +H54G46CYRBX267 0 (0000) +H54G56CYRBX247 1 (0001) +K4U6E3S4AB-MGCL 0 (0000) +K4UBE3D4AB-MGCL 1 (0001) diff --git a/src/mainboard/google/brya/variants/zydron/memory/mem_parts_used.txt b/src/mainboard/google/brya/variants/zydron/memory/mem_parts_used.txt new file mode 100644 index 0000000000..a188982f16 --- /dev/null +++ b/src/mainboard/google/brya/variants/zydron/memory/mem_parts_used.txt @@ -0,0 +1,6 @@ +MT53E512M32D1NP-046 WT:B +MT53E1G32D2NP-046 WT:B +H54G46CYRBX267 +H54G56CYRBX247 +K4U6E3S4AB-MGCL +K4UBE3D4AB-MGCL diff --git a/src/mainboard/google/brya/variants/zydron/overridetree.cb b/src/mainboard/google/brya/variants/zydron/overridetree.cb new file mode 100644 index 0000000000..f8a14be293 --- /dev/null +++ b/src/mainboard/google/brya/variants/zydron/overridetree.cb @@ -0,0 +1,509 @@ +fw_config + field KB_BL 0 0 + option KB_BL_ABSENT 0 + option KB_BL_PRESENT 1 + end + field AUDIO 1 3 + option AUDIO_UNKNOWN 0 + option MAX98373_NAU88L25B_I2S 1 + end + field UFC 4 5 + option UFC_USB 0 + option UFC_MIPI_OVTI2740 1 + end + field STYLUS 6 + option STYLUS_ABSENT 0 + option STYLUS_PRESENT 1 + end +end +chip soc/intel/alderlake + register "sagv" = "SaGv_Enabled" + + # As per Intel Advisory doc#723158, the change is required to prevent possible + # display flickering issue. + register "usb2_phy_sus_pg_disable" = "1" + + # GPE configuration + register "pmc_gpe0_dw1" = "GPP_D" + + # Acoustic settings + register "acoustic_noise_mitigation" = "1" + register "slow_slew_rate[VR_DOMAIN_IA]" = "SLEW_FAST_8" + register "slow_slew_rate[VR_DOMAIN_GT]" = "SLEW_FAST_8" + register "fast_pkg_c_ramp_disable[VR_DOMAIN_IA]" = "1" + register "fast_pkg_c_ramp_disable[VR_DOMAIN_GT]" = "1" + + register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Disable USB2_C1 + register "usb2_ports[3]" = "USB2_PORT_EMPTY" # Disable M.2 WWAN + + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Disable M.2 WWAN + + # FIVR configurations for zydron are disabled since the board doesn't have V1p05 and Vnn + # bypass rails implemented. + register "ext_fivr_settings" = "{ + .configure_ext_fivr = 1, + }" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI1 | Fingerprint MCU | + #| I2C0 | Audio | + #| I2C1 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| I2C2 | SAR0 | + #| I2C3 | Touchscreen | + #| I2C5 | Trackpad | + #+-------------------+---------------------------+ + + register "common_soc_config" = "{ + .i2c[1] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + .rise_time_ns = 600, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 650, + .fall_time_ns = 400, + .data_hold_time_ns = 50, + }, + }" + + register "power_limits_config[ADL_P_282_482_28W_CORE]" = "{ + .tdp_pl1_override = 20, + .tdp_pl2_override = 43, + .tdp_pl4 = 105, + }" + + register "power_limits_config[ADL_P_682_28W_CORE]" = "{ + .tdp_pl1_override = 20, + .tdp_pl2_override = 43, + .tdp_pl4 = 105, + }" + + device domain 0 on + device ref dtt on + chip drivers/intel/dptf + ## sensor information + register "options.tsr[0].desc" = ""DRAM"" + register "options.tsr[1].desc" = ""Soc"" + register "options.tsr[2].desc" = ""Charger"" + + # TODO: below values are initial reference values only + ## Active Policy + register "policies.active" = "{ + [0] = { + .target = DPTF_CPU, + .thresholds = { + TEMP_PCT(85, 90), + TEMP_PCT(75, 80), + TEMP_PCT(68, 70), + TEMP_PCT(62, 60), + TEMP_PCT(55, 50), + TEMP_PCT(50, 40), + TEMP_PCT(40, 30), + } + }, + [1] = { + .target = DPTF_TEMP_SENSOR_1, + .thresholds = { + TEMP_PCT(60, 90), + TEMP_PCT(55, 80), + TEMP_PCT(52, 70), + TEMP_PCT(48, 60), + TEMP_PCT(44, 50), + TEMP_PCT(40, 40), + TEMP_PCT(36, 30), + } + } + }" + + ## Passive Policy + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 90, 5000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 55, 5000), + [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 55, 5000), + [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 55, 5000), + }" + + ## Critical Policy + register "policies.critical" = "{ + [0] = DPTF_CRITICAL(CPU, 100, SHUTDOWN), + [1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN), + [2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN), + [3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN), + }" + + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 18000, + .max_power = 20000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 200, + }, + .pl2 = { + .min_power = 43000, + .max_power = 43000, + .time_window_min = 28 * MSECS_PER_SEC, + .time_window_max = 32 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 1700 }, + [1] = { 24, 1500 }, + [2] = { 16, 1000 }, + [3] = { 8, 500 } + }" + + ## Fan Performance Control (Percent, Speed, Noise, Power) + register "controls.fan_perf" = "{ + [0] = { 90, 6700, 220, 2200, }, + [1] = { 80, 5800, 180, 1800, }, + [2] = { 70, 5000, 145, 1450, }, + [3] = { 60, 4900, 115, 1150, }, + [4] = { 50, 3838, 90, 900, }, + [5] = { 40, 2904, 55, 550, }, + [6] = { 30, 2337, 30, 300, }, + [7] = { 20, 1608, 15, 150, }, + [8] = { 10, 800, 10, 100, }, + [9] = { 0, 0, 0, 50, } + }" + + ## Fan options + register "options.fan.fine_grained_control" = "1" + register "options.fan.step_size" = "2" + + device generic 0 alias dptf_policy on end + end + end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "1" + register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used + register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0"" + register "cio2_prt[0]" = "1" + device generic 0 on + probe UFC UFC_MIPI_OVTI2740 + end + end + end + device ref pcie4_0 on + # Enable CPU PCIE RP 1 using CLK 0 + register "cpu_pcie_rp[CPU_RP(1)]" = "{ + .clk_req = 0, + .clk_src = 0, + .flags = PCIE_RP_LTR | PCIE_RP_AER, + }" + end + device ref tcss_dma0 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" + use tcss_usb3_port1 as dfp[0].typec_port + device generic 0 on end + end + end + device ref tcss_dma1 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" + use tcss_usb3_port3 as dfp[0].typec_port + device generic 0 on end + end + end + device ref cnvi_wifi on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + device generic 0 on end + end + end + device ref i2c0 on + chip drivers/i2c/nau8825 + register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A23)" + register "jkdet_enable" = "1" + register "jkdet_pull_enable" = "0" + register "jkdet_pull_up" = "0" + register "jkdet_polarity" = "1" # ActiveLow + register "vref_impedance" = "2" # 125kOhm + register "micbias_voltage" = "6" # 2.754 + register "sar_threshold_num" = "4" + register "sar_threshold[0]" = "0x0C" + register "sar_threshold[1]" = "0x1C" + register "sar_threshold[2]" = "0x38" + register "sar_threshold[3]" = "0x60" + register "sar_hysteresis" = "1" + register "sar_voltage" = "6" + register "sar_compare_time" = "0" # 500ns + register "sar_sampling_time" = "0" # 2us + register "short_key_debounce" = "2" # 100ms + register "jack_insert_debounce" = "7" # 512ms + register "jack_eject_debounce" = "7" # 512ms + device i2c 1a on + probe AUDIO MAX98373_NAU88L25B_I2S + end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "0" + register "imon_slot_no" = "1" + register "uid" = "0" + register "desc" = ""Right Speaker Amp"" + register "name" = ""MAXR"" + device i2c 31 on + probe AUDIO MAX98373_NAU88L25B_I2S + end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "2" + register "imon_slot_no" = "3" + register "uid" = "1" + register "desc" = ""Left Speaker Amp"" + register "name" = ""MAXL"" + device i2c 32 on + probe AUDIO MAX98373_NAU88L25B_I2S + end + end + end #I2C0 + device ref i2c1 on + chip drivers/i2c/tpm + register "hid" = ""GOOG0005"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)" + device i2c 50 on end + end + end + device ref i2c2 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""INT3474"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 2740 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + register "has_power_resource" = "1" + + register "ssdb.lanes_used" = "2" + register "ssdb.link_used" = "1" + register "num_freq_entries" = "1" + register "link_freq[0]" = "360 * MHz" + register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" + + #Controls + register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" + register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" + + register "gpio_panel.gpio[0].gpio_num" = "GPP_F20" #reset + register "gpio_panel.gpio[1].gpio_num" = "GPP_C4" #power + + #_ON + register "on_seq.ops_cnt" = "4" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + + #_OFF + register "off_seq.ops_cnt" = "3" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + + device i2c 36 on + probe UFC UFC_MIPI_OVTI2740 + end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""AT24 EEPROM"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + + register "nvm_size" = "0x2000" + register "nvm_pagesize" = "1" + register "nvm_readonly" = "1" + register "nvm_width" = "0x10" + register "nvm_compat" = ""atmel,24c64"" + + device i2c 50 on + probe UFC UFC_MIPI_OVTI2740 + end + end + end + device ref i2c3 on + chip drivers/i2c/hid + register "generic.hid" = ""ELAN90FC"" + register "generic.desc" = ""ELAN Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" + register "generic.reset_delay_ms" = "20" + register "generic.reset_off_delay_ms" = "1" + register "generic.enable_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" + register "generic.enable_delay_ms" = "6" + register "generic.enable_off_delay_ms" = "30" + register "generic.stop_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" + register "generic.stop_off_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 0x10 on end + end + chip drivers/generic/gpio_keys + register "name" = ""PENH"" + # GPP_D6 is the IRQ source, and GPP_D17 is the wake source + register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_D6)" + register "key.wake_gpe" = "GPE0_DW1_17" + register "key.wakeup_route" = "WAKEUP_ROUTE_SCI" + register "key.wakeup_event_action" = "EV_ACT_DEASSERTED" + register "key.dev_name" = ""EJCT"" + register "key.linux_code" = "SW_PEN_INSERTED" + register "key.linux_input_type" = "EV_SW" + register "key.label" = ""pen_eject"" + device generic 0 on + probe STYLUS STYLUS_PRESENT + end + end + end + device ref i2c5 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)" + register "wake" = "GPE0_DW2_14" + register "detect" = "1" + device i2c 15 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""PNP0C50"" + register "generic.desc" = ""Synaptics Touchpad"" + register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)" + register "generic.wake" = "GPE0_DW2_14" + register "generic.detect" = "1" + register "hid_desc_reg_offset" = "0x20" + device i2c 0x2c on end + end + end + device ref pcie_rp6 off end # PCIE6 WWAN + device ref pcie_rp8 off end # PCIE8 SD card + device ref pcie_rp9 off end # PCIE9-12 SSD + device ref gspi1 on + chip drivers/spi/acpi + register "name" = ""CRFP"" + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "uid" = "1" + register "compat_string" = ""google,cros-ec-spi"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" + register "wake" = "GPE0_DW2_15" + register "has_power_resource" = "1" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D1)" + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D2)" + register "enable_delay_ms" = "3" + device spi 0 on end + end # FPMCU + end + device ref pch_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + use conn1 as mux_conn[1] + device pnp 0c09.0 on end + end + end + device ref pmc hidden + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + use usb2_port1 as usb2_port + use tcss_usb3_port1 as usb3_port + device generic 0 alias conn0 on end + end + chip drivers/intel/pmc_mux/conn + use usb2_port3 as usb2_port + use tcss_usb3_port3 as usb3_port + device generic 1 alias conn1 on end + end + end + end + end + device ref tcss_xhci on + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" + device ref tcss_usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C1 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))" + device ref tcss_usb3_port3 on end + end + end + end + end + device ref xhci on + chip drivers/usb/acpi + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))" + device ref usb2_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C1 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))" + device ref usb2_port3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port6 on + probe UFC UFC_USB + end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port A0 (MLB)"" + register "type" = "UPC_TYPE_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" + device ref usb2_port9 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" + device ref usb2_port10 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port A0 (MLB)"" + register "type" = "UPC_TYPE_USB3_A" + register "use_custom_pld" = "true" + register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, LEFT, ACPI_PLD_GROUP(1, 2))" + device ref usb3_port1 on end + end + end + end + end + end +end diff --git a/src/mainboard/google/brya/variants/zydron/ramstage.c b/src/mainboard/google/brya/variants/zydron/ramstage.c new file mode 100644 index 0000000000..aa48a9db31 --- /dev/null +++ b/src/mainboard/google/brya/variants/zydron/ramstage.c @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/variants.h> +#include <device/pci_ids.h> + +const struct cpu_power_limits limits[] = { + /* SKU_ID, TDP (Watts), pl1_min, pl1_max, pl2_min, pl2_max, pl4 */ + { PCI_DID_INTEL_ADL_P_ID_7, 15, 12000, 15000, 40000, 40000, 105000 }, + { PCI_DID_INTEL_ADL_P_ID_6, 15, 12000, 15000, 40000, 40000, 105000 }, + { PCI_DID_INTEL_ADL_P_ID_5, 28, 18000, 20000, 43000, 43000, 105000 }, + { PCI_DID_INTEL_ADL_P_ID_3, 28, 18000, 20000, 43000, 43000, 105000 }, +}; + +void variant_devtree_update(void) +{ + size_t total_entries = ARRAY_SIZE(limits); + variant_update_power_limits(limits, total_entries); +} diff --git a/src/mainboard/google/brya/variants/zydron/variant.c b/src/mainboard/google/brya/variants/zydron/variant.c new file mode 100644 index 0000000000..e21ab5a91c --- /dev/null +++ b/src/mainboard/google/brya/variants/zydron/variant.c @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <chip.h> +#include <fw_config.h> +#include <baseboard/variants.h> + +void variant_update_soc_chip_config(struct soc_intel_alderlake_config *config) +{ + config->cnvi_bt_audio_offload = fw_config_probe(FW_CONFIG(AUDIO, + MAX98373_NAU88L25B_I2S)); +} |