mb/google/geralt: Fix MIPI panel power on/off sequence

Based on the power sequence of the panel [1], the power on T2 sequence
VSP to VSN should be larger than 1ms, and the power off T2 sequence VSP
to VSN should be larger than 0ms. We modify the power sequence to meet
the datasheet requirement.

[1] B5 TV110C9M-LL0 Product Specification Rev.P0

Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I4ccb5be04062a0516f84a054ff3f40afbf5279be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>

6 files changed, 18 insertions, 71 deletions

diff --git a/src/mainboard/google/geralt/display.c b/src/mainboard/google/geralt/display.c
index 8c7a0c1cf6..fa007a1e28 100644
--- a/src/mainboard/google/geralt/display.c
+++ b/src/mainboard/google/geralt/display.c
@@ -1,9 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
-#include <assert.h>
 #include <console/console.h>
 #include <delay.h>
-#include <device/i2c_simple.h>
 #include <edid.h>
 #include <framebuffer_info.h>
 #include <gpio.h>
@@ -11,16 +9,12 @@
 #include <soc/dptx.h>
 #include <soc/dsi.h>
 #include <soc/gpio_common.h>
-#include <soc/i2c.h>
 #include <soc/mtcmos.h>
 
 #include "display.h"
 #include "gpio.h"
 #include "panel.h"
 
-#define PMIC_TPS65132_I2C	I2C3
-#define PMIC_TPS65132_SLAVE	0x3E
-
 int configure_display(void)
 {
 	struct edid edid;
@@ -78,44 +72,3 @@ int configure_display(void)
 
 	return 0;
 }
-
-void tps65132s_program_eeprom(void)
-{
-	u8 value = 0;
-	u8 value1 = 0;
-
-	/* Initialize I2C3 for PMIC TPS65132 */
-	mtk_i2c_bus_init(PMIC_TPS65132_I2C, I2C_SPEED_FAST);
-	mdelay(10);
-
-	gpio_output(GPIO_EN_PPVAR_MIPI_DISP, 1);
-	gpio_output(GPIO_EN_PPVAR_MIPI_DISP_150MA, 1);
-	mdelay(10);
-
-	i2c_read_field(PMIC_TPS65132_I2C, PMIC_TPS65132_SLAVE, 0x00, &value, 0xFF, 0);
-	i2c_read_field(PMIC_TPS65132_I2C, PMIC_TPS65132_SLAVE, 0x01, &value1, 0xFF, 0);
-
-	if (value != 0x11 || value1 != 0x11) {
-		printk(BIOS_INFO, "Just set AVDD AVEE 5.7V to EEPROM Data in first time.\n");
-
-		/* Set AVDD = 5.7V */
-		if (panel_pmic_reg_mask(PMIC_TPS65132_I2C, PMIC_TPS65132_SLAVE, 0x00, 0x11,
-					0x1F) < 0)
-			return;
-
-		/* Set AVEE = -5.7V */
-		if (panel_pmic_reg_mask(PMIC_TPS65132_I2C, PMIC_TPS65132_SLAVE, 0x01, 0x11,
-					0x1F) < 0)
-			return;
-
-		/* Set EEPROM Data */
-		if (panel_pmic_reg_mask(PMIC_TPS65132_I2C, PMIC_TPS65132_SLAVE, 0xFF, 0x80,
-					0xFC) < 0)
-			return;
-		mdelay(50);
-	}
-
-	gpio_output(GPIO_EN_PPVAR_MIPI_DISP, 0);
-	gpio_output(GPIO_EN_PPVAR_MIPI_DISP_150MA, 0);
-	mdelay(5);
-}
diff --git a/src/mainboard/google/geralt/display.h b/src/mainboard/google/geralt/display.h
index 71e0e08392..29153b303c 100644
--- a/src/mainboard/google/geralt/display.h
+++ b/src/mainboard/google/geralt/display.h
@@ -4,6 +4,5 @@
 #define __MAINBOARD_GOOGLE_GERALT_DISPLAY_H__
 
 int configure_display(void);
-void tps65132s_program_eeprom(void);
 
 #endif
diff --git a/src/mainboard/google/geralt/panel.c b/src/mainboard/google/geralt/panel.c
index 78d4f84bbd..3174870050 100644
--- a/src/mainboard/google/geralt/panel.c
+++ b/src/mainboard/google/geralt/panel.c
@@ -3,7 +3,6 @@
 #include <boardid.h>
 #include <cbfs.h>
 #include <console/console.h>
-#include <device/i2c_simple.h>
 #include <edid.h>
 #include <gpio.h>
 #include <soc/gpio_common.h>
@@ -12,21 +11,6 @@
 #include "gpio.h"
 #include "panel.h"
 
-int panel_pmic_reg_mask(u32 bus, u8 chip, u8 addr, u8 val, u8 mask)
-{
-	u8 msg = 0;
-
-	if (i2c_read_field(bus, chip, addr, &msg, 0xFF, 0) < 0) {
-		printk(BIOS_ERR, "Failed to read i2c: addr(%u)\n", addr);
-		return -1;
-	}
-
-	msg &= ~mask;
-	msg |= val;
-
-	return i2c_write_field(bus, chip, addr, msg, 0xFF, 0);
-}
-
 static void get_mipi_cmd_from_cbfs(struct panel_description *desc)
 {
 	/*
diff --git a/src/mainboard/google/geralt/panel.h b/src/mainboard/google/geralt/panel.h
index 0335ece695..11b7fb0918 100644
--- a/src/mainboard/google/geralt/panel.h
+++ b/src/mainboard/google/geralt/panel.h
@@ -17,7 +17,6 @@ struct panel_description {
 };
 
 void fill_lp_backlight_gpios(struct lb_gpios *gpios);
-int panel_pmic_reg_mask(u32 bus, u8 chip, u8 addr, u8 val, u8 mask);
 uint32_t panel_id(void);
 struct panel_description *get_panel_description(uint32_t panel_id);
 struct panel_description *get_active_panel(void);
diff --git a/src/mainboard/google/geralt/panel_geralt.c b/src/mainboard/google/geralt/panel_geralt.c
index 159bc76cb6..9a98836473 100644
--- a/src/mainboard/google/geralt/panel_geralt.c
+++ b/src/mainboard/google/geralt/panel_geralt.c
@@ -8,6 +8,7 @@
 #include <soc/gpio_common.h>
 #include <soc/i2c.h>
 #include <soc/regulator.h>
+#include <soc/tps65132s.h>
 #include <soc/pmif.h>
 #include <string.h>
 
@@ -15,6 +16,7 @@
 #include "gpio.h"
 #include "panel.h"
 
+#define PMIC_TPS65132_I2C	I2C3
 
 static void configure_mipi_pwm_backlight(void)
 {
@@ -29,17 +31,26 @@ static void configure_edp_backlight(void)
 
 static void power_on_mipi_boe_tv110c9m_ll0(void)
 {
-	tps65132s_program_eeprom();
+	const struct tps65132s_reg_setting reg_settings[] = {
+		{ PMIC_TPS65132_VPOS, 0x11, 0x1f },
+		{ PMIC_TPS65132_VNEG, 0x11, 0x1f },
+		{ PMIC_TPS65132_DLYX, 0x95, 0xff },
+		{ PMIC_TPS65132_ASSDD, 0x5b, 0xff },
+	};
+	const struct tps65132s_cfg cfg = {
+		.i2c_bus = PMIC_TPS65132_I2C,
+		.en = GPIO_EN_PPVAR_MIPI_DISP,
+		.sync = GPIO_EN_PPVAR_MIPI_DISP_150MA,
+		.settings = reg_settings,
+		.setting_counts = ARRAY_SIZE(reg_settings),
+	};
 
 	/* Enable VM18V */
 	mainboard_enable_regulator(MTK_REGULATOR_VDD18, true);
-
+	if (tps65132s_setup(&cfg) != CB_SUCCESS)
+		printk(BIOS_ERR, "Failed to set up voltage regulator tps65132s\n");
 	gpio_output(GPIO_DISP_RST_1V8_L, 0);
 	mdelay(1);
-
-	gpio_output(GPIO_EN_PPVAR_MIPI_DISP, 1);
-	gpio_output(GPIO_EN_PPVAR_MIPI_DISP_150MA, 1);
-	mdelay(10);
 	gpio_output(GPIO_DISP_RST_1V8_L, 1);
 	mdelay(1);
 	gpio_output(GPIO_DISP_RST_1V8_L, 0);
diff --git a/src/soc/mediatek/mt8188/Makefile.inc b/src/soc/mediatek/mt8188/Makefile.inc
index 651cff0d5a..67c2d7ac23 100644
--- a/src/soc/mediatek/mt8188/Makefile.inc
+++ b/src/soc/mediatek/mt8188/Makefile.inc
@@ -55,6 +55,7 @@ ramstage-y += ../common/rtc.c ../common/rtc_osc_init.c ../common/rtc_mt6359p.c
 ramstage-y += soc.c
 ramstage-y += ../common/spm.c spm.c
 ramstage-y += ../common/sspm.c
+ramstage-y += ../common/tps65132s.c
 ramstage-y += ../common/usb.c usb.c
 
 BL31_MAKEARGS += PLAT=mt8188