Add pci_rawops.h from the mailing list and fix the via/epia-m700 build.

Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4406 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

5 files changed, 423 insertions, 172 deletions

diff --git a/src/mainboard/via/epia-m700/cache_as_ram_auto.c b/src/mainboard/via/epia-m700/cache_as_ram_auto.c
index 8a2c8a0267..b0d543b01d 100644
--- a/src/mainboard/via/epia-m700/cache_as_ram_auto.c
+++ b/src/mainboard/via/epia-m700/cache_as_ram_auto.c
@@ -43,7 +43,7 @@
 #include "pc80/udelay_io.c"
 #include "lib/delay.c"
 #if CONFIG_USE_INIT == 0
-#include "lib/memcpy.c"
+#include <string.h>
 #endif
 #include "cpu/x86/lapic/boot_cpu.c"
 
@@ -208,21 +208,6 @@ static void enable_shadow_ram(void)
 #endif
 }
 
-/* !!FIXME!!
- * This is a bogus definition to get it to compile.
- */
-
-struct VIA_PCI_REG_INIT_TABLE {
-	u8 and_val;
-	u8 or_val;
-	u8 bus;
-	u8 dev;
-	u8 func;
-	u8 reg;
-	u8 v1;
-	u8 v2;
-};
-
 /*
  * Added this table 2008-11-28.
  * This table contains the value needed to be set before begin to init DRAM.
diff --git a/src/northbridge/via/vx800/dram_init.c b/src/northbridge/via/vx800/dram_init.c
index ad4d721cbd..fb1befa0f3 100644
--- a/src/northbridge/via/vx800/dram_init.c
+++ b/src/northbridge/via/vx800/dram_init.c
@@ -17,7 +17,6 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
-#include "lib/memset.c"
 CB_STATUS DDR2_DRAM_INIT()
 {
 	CB_STATUS Status;
diff --git a/src/northbridge/via/vx800/examples/chipset_init.c b/src/northbridge/via/vx800/examples/chipset_init.c
index 9c00f96939..c04da9cbc8 100644
--- a/src/northbridge/via/vx800/examples/chipset_init.c
+++ b/src/northbridge/via/vx800/examples/chipset_init.c
@@ -93,12 +93,12 @@ static const struct VIA_PCI_REG_INIT_TABLE mNbStage2InitTable[] = {
 	0x00, 0xFF, NB_PXPTRF_REG(0x84), 0x00, 0x28,
 	0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0xC0,
 	0x00, 0xFF, NB_MSGC_REG(0xA3), 0x00, 0x01,	// RWAKEEN
-//  0x00, 0xFF, NB_PXPTRF_REG(0x64), 0x40, 0x00, //RTDNP2B32EN 
+//  0x00, 0xFF, NB_PXPTRF_REG(0x64), 0x40, 0x00, //RTDNP2B32EN
 	0x00, 0xFF, NB_PXPTRF_REG(0xF3), 0xFC, 0x20,
 	0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0x00,	//RP2P1ABORT
 
 
-// fine-tune 
+// fine-tune
 // If no settings, C7 will hang or reboot in XP, but CN will not.
 	0x00, 0xFF, NB_HOST_REG(0x51), 0x84, 0x00,
 	0x00, 0xFF, NB_HOST_REG(0x52), 0x0F, 0x03,
@@ -108,8 +108,8 @@ static const struct VIA_PCI_REG_INIT_TABLE mNbStage2InitTable[] = {
 	0x00, 0xFF, NB_HOST_REG(0x5C), 0x10, 0x10,
 	0x00, 0xFF, NB_HOST_REG(0x5F), 0x0E, 0x08,
 	0x00, 0xFF, NB_HOST_REG(0x92), 0xFF, 0x04,	// ACPI Base addr
-	0x00, 0xFF, NB_HOST_REG(0x97), 0x01, 0x01,	// APIC MSI  
-	0x00, 0xFF, NB_HOST_REG(0x99), 0x02, 0x00,	// APIC MSI  
+	0x00, 0xFF, NB_HOST_REG(0x97), 0x01, 0x01,	// APIC MSI
+	0x00, 0xFF, NB_HOST_REG(0x99), 0x02, 0x00,	// APIC MSI
 	//GTL
 	0x00, 0xFF, NB_HOST_REG(0x73), 0xFF, 0x66,
 	0x00, 0xFF, NB_HOST_REG(0xB2), 0xFF, 0x33,
@@ -163,9 +163,9 @@ static const struct VIA_PCI_REG_INIT_TABLE mBusControllerInitTable[] = {
 	0x00, 0xFF, SB_LPC_REG(0x67), 0x03, 0x01,
 
 
-	0x00, 0xFF, SB_LPC_REG(0x50), 0x7E, 0x00,	// Setting PCI device enable       
-	0x00, 0xFF, SB_LPC_REG(0x51), 0xD0, 0x00,	// Setting PCI device enable       
-	0x00, 0xFF, SB_VLINK_REG(0xD1), 0x04, 0x00,	// Setting HDAC enable      
+	0x00, 0xFF, SB_LPC_REG(0x50), 0x7E, 0x00,	// Setting PCI device enable
+	0x00, 0xFF, SB_LPC_REG(0x51), 0xD0, 0x00,	// Setting PCI device enable
+	0x00, 0xFF, SB_VLINK_REG(0xD1), 0x04, 0x00,	// Setting HDAC enable
 	{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},	// End of Table
 };
 
@@ -249,8 +249,8 @@ void AcpiInit(void)
 {
 	device_t_raw rawdevice = 0;
 	u8 sbchiprev;
-	rawdevice = PCI_DEV(0, 0x11, 0);
-	// Set the PMIO base io address 
+	rawdevice = PCI_RAWDEV(0, 0x11, 0);
+	// Set the PMIO base io address
 	pci_rawmodify_config16(rawdevice, 0x88, VX800_ACPI_IO_BASE,
 			       0xff80);
 	// Enable PMIO
@@ -277,13 +277,13 @@ void Stage2NbInit(void)
 	device_t_raw rawdevice = 0;
 	u8 nbchiprev;
 	u32 subid = 0;
-	rawdevice = PCI_DEV(0, 0, 4);
+	rawdevice = PCI_RAWDEV(0, 0, 4);
 	nbchiprev = pci_rawread_config8(rawdevice, 0xf6);
 	printk_debug("NB chip revision =%x\n", nbchiprev);
 
 	via_pci_inittable(nbchiprev, mNbStage2InitTable);
 
-	rawdevice = PCI_DEV(0, 0, 0);
+	rawdevice = PCI_RAWDEV(0, 0, 0);
 
 	subid = PCI_DEVICE_ID_VIA_VX855_D0F0 << 16 + PCI_VENDOR_ID_VIA;
 	pci_rawwrite_config32(rawdevice, 0x2C, subid);
@@ -295,15 +295,15 @@ void Stage2NbInit(void)
 
 void IDECSupportOption(u8 sbchiprev)
 {
-	pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0, 0x08);
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0, 0x08);
 
-	pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x45, 0x00, 0x80);
-	pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x0A, 0x01, 0xFF);
-	pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x45, 0x80, 0x00);
-	pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x40, 0x02, 0x00);
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x45, 0x00, 0x80);
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x0A, 0x01, 0xFF);
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x45, 0x80, 0x00);
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x40, 0x02, 0x00);
 
-	pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x09, 0x00, 0x05);	//COMPATIBLE MODE 
-//      pci_rawmodify_config8(PCI_DEV(0, 0xf, 0), 0x09, 0x05, 0x05);//native MODE 
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x09, 0x00, 0x05);	//COMPATIBLE MODE
+//      pci_rawmodify_config8(PCI_RAWDEV(0, 0xf, 0), 0x09, 0x05, 0x05);//native MODE
 
 	via_pci_inittable(sbchiprev, IDEC_INIT);
 }
@@ -350,23 +350,23 @@ void InitUHCI(u8 Number, u8 bEnable)
 		Mask = 0x0;
 		Value = 0x1 << BitShift;
 	}
-	pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, Value, Mask);
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, Value, Mask);
 
 
 	if (bEnable) {
 		D16 = 0;
-		pci_rawwrite_config16(PCI_DEV(0, 0x10, BaseAddress),
+		pci_rawwrite_config16(PCI_RAWDEV(0, 0x10, BaseAddress),
 				      0x20, D16);
 
 		// Config some Control Register
 		Mask = 0x00;
 		Value = 0x12;
 
-		pci_rawmodify_config8(PCI_DEV(0, 0x10, BaseAddress),
+		pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, BaseAddress),
 				      0x41, Value, Mask);
 		Mask = 0x00;
 		Value = 0xEB;
-		pci_rawmodify_config8(PCI_DEV(0, 0x10, BaseAddress),
+		pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, BaseAddress),
 				      0x4B, Value, Mask);
 	}
 	return;
@@ -407,13 +407,13 @@ void InitEHCI(u8 Number, u8 bEnable)
 		Mask = 0x0;
 		Value = 0x1 << 1;
 	}
-	pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, Value, Mask);
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, Value, Mask);
 
 
 	if (bEnable) {
 		// Get Chipset Revision
 		EHCIRevision =
-		    pci_rawread_config8(PCI_DEV(0, 0x10, 4), 0xF6);
+		    pci_rawread_config8(PCI_RAWDEV(0, 0x10, 4), 0xF6);
 		printk_debug("EHCI Revision =%x\n", EHCIRevision);
 		via_pci_inittable(EHCIRevision, mEHCIInitTable);
 	}
@@ -475,9 +475,9 @@ void HpetInit(void)
 {
 	u8 HpetEnable = HPET_ENABLE_BIT;
 	u16 HpetBase = HPET_BASE_ADDRESS;
-	pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), R_SB_HPET_CONTROL,
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_HPET_CONTROL,
 			     HpetEnable);
-	pci_rawwrite_config16(PCI_DEV(0, 0x11, 0),
+	pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0),
 			      R_SB_HPET_ADDRESS + 1, HpetBase);
 }
 
@@ -499,7 +499,7 @@ static const struct VIA_PCI_REG_INIT_TABLE mPMUInitTable[] = {
 	0x00, 0xFF, SB_LPC_REG(0xE2), 0x00, 0xEA,
 
 	0x00, 0xFF, SB_LPC_REG(0xE7), 0x00, 0x80,
-	{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},	// End of Table   
+	{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},	// End of Table
 };
 
 void InitPMU(u8 sbchiprev)
@@ -512,7 +512,7 @@ void InitPMU(u8 sbchiprev)
 	// Set SCI IRQ and its level trigger
 	Mask = 0x0F;
 	Value = 0x09;
-	pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x82, Value, Mask);
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x82, Value, Mask);
 
 	Mask = 0x02;
 	Value = 0x02;
@@ -533,7 +533,7 @@ void InitCPUCStatueSupport()
 	// Now it is C2 & C4 Up Down Mode
 	Mask = 0xFF;
 	Value = 0x30;
-	pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), R_SB_CX_STATE_BREAK_EVENT_ENABLE_1, Value, Mask);	//SB_LPC_REG
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_CX_STATE_BREAK_EVENT_ENABLE_1, Value, Mask);	//SB_LPC_REG
 
 	Mask = 0xFF;
 	Value = 0x1F;
@@ -542,15 +542,15 @@ void InitCPUCStatueSupport()
 
 	Mask = 0x00;
 	Value = 0x80;
-	pci_rawmodify_config8(PCI_DEV(0, 0x11, 7), R_SB_PCI_ARBITRATION_2, Value, Mask);	//SB_VLINK_REG
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 7), R_SB_PCI_ARBITRATION_2, Value, Mask);	//SB_VLINK_REG
 
 	Mask = 0xFF;
 	Value = 0x00;
-	pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), R_SB_MULTI_FUNCTION_SELECT_1, Value, Mask);	//SB_VLINK_REG
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_MULTI_FUNCTION_SELECT_1, Value, Mask);	//SB_VLINK_REG
 
 	Mask = 0xFF;
 	Value = 0x1F;
-	pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), R_SB_AUTO_SWITCH_P_STATE, Value, Mask);	//SB_VLINK_REG
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), R_SB_AUTO_SWITCH_P_STATE, Value, Mask);	//SB_VLINK_REG
 }
 
 void InitSBPM(u8 sbchiprev)
@@ -565,7 +565,7 @@ void Stage2SbInit(void)
 	device_t_raw rawdevice = 0;
 	u8 sbchiprev;
 
-	rawdevice = PCI_DEV(0, 11, 0);
+	rawdevice = PCI_RAWDEV(0, 11, 0);
 	sbchiprev = pci_rawread_config8(rawdevice, 0xf6);
 	printk_debug("SB chip revision =%x\n", sbchiprev);
 
@@ -585,7 +585,7 @@ void Stage2SbInit(void)
 
 	HpetInit();
 
-	//pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x76, 0);//SB_VLINK_REG
+	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x76, 0);//SB_VLINK_REG
 
 }
 
@@ -593,8 +593,8 @@ void Stage2SbInit(void)
 void init_VIA_chipset(void)
 {
 	printk_debug("In: init_VIA_chipset\n");
-	//1.nbstage1 is done in raminit. 
-	//2.sbstage1 
+	//1.nbstage1 is done in raminit.
+	//2.sbstage1
 	AcpiInit();
 	//3.nbstage2
 	Stage2NbInit();
@@ -603,18 +603,18 @@ void init_VIA_chipset(void)
 	Stage2SbInit();
 
 	//5.open hdac
-	pci_rawmodify_config32(PCI_DEV(0, 0x11, 7), 0xd1, 0, 0x04);
+	pci_rawmodify_config32(PCI_RAWDEV(0, 0x11, 7), 0xd1, 0, 0x04);
 	printk_debug("End: init_VIA_chipset\n");
 }
 
 /**
  * @brief Main function of the DRAM part of coreboot.
  *
- * Coreboot is divided into Pre-DRAM part and DRAM part. 
+ * Coreboot is divided into Pre-DRAM part and DRAM part.
+ *
  *
- * 
  * Device Enumeration:
- *	In the dev_enumerate() phase, 
+ *	In the dev_enumerate() phase,
  */
 
 void hardwaremain(int boot_complete)
@@ -634,27 +634,27 @@ void hardwaremain(int boot_complete)
 
 #if 0
 
-	pci_rawwrite_config8(PCI_DEV(0, 0, 4), 0xa3, 0x80);
-	pci_rawwrite_config8(PCI_DEV(0, 17, 7), 0x60, 0x20);
-	pci_rawwrite_config8(PCI_DEV(0, 17, 7), 0xE5,
-			     pci_rawread_config8(PCI_DEV(0, 3, 0),
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xa3, 0x80);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0x60, 0x20);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0xE5,
+			     pci_rawread_config8(PCI_RAWDEV(0, 3, 0),
 						 0x88));
 #endif
 
-	pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x51, 0x40, 0x40);	//close CE-ATA (Consumer Electronics-ATA) and NFC
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x51, 0x40, 0x40);	//close CE-ATA (Consumer Electronics-ATA) and NFC
 
-	//pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x0, 0x40);//open USB Device Mode Enable 
-	pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x40, 0x40);	//close USB Device Mode
+	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x0, 0x40);//open USB Device Mode Enable
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x40, 0x40);	//close USB Device Mode
 
-	//pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x04, 0x04);//close USB 1.1 UHCI Port 4-5
-	//pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x02, 0x02);//close USB 2.0 ehci
+	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x04, 0x04);//close USB 1.1 UHCI Port 4-5
+	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x02, 0x02);//close USB 2.0 ehci
 
 
-	//pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x00, 0x76);//open all usb and usb mode
-	//pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x50, 0x76, 0x76);//close all usb
+	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x00, 0x76);//open all usb and usb mode
+	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x50, 0x76, 0x76);//close all usb
 
 	printk_info("=================SB 50h=%02x \n",
-		    pci_rawread_config8(PCI_DEV(0, 0x11, 0), 0x50));
+		    pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x50));
 
 
 	/* FIXME: Is there a better way to handle this? */
@@ -671,7 +671,7 @@ void hardwaremain(int boot_complete)
 		y = 0;
 		for (; y < 16; y++) {
 			printk_info("%02x ",
-				    pci_rawread_config8(PCI_DEV
+				    pci_rawread_config8(PCI_RAWDEV
 							(0, 0x10, 4),
 							x * 16 + y));
 		}
@@ -690,7 +690,7 @@ void hardwaremain(int boot_complete)
 		y = 0;
 		for (; y < 16; y++) {
 			printk_info("%02x ",
-				    pci_rawread_config8(PCI_DEV
+				    pci_rawread_config8(PCI_RAWDEV
 							(0, 0x10, 4),
 							x * 16 + y));
 		}
@@ -710,7 +710,7 @@ void hardwaremain(int boot_complete)
 		y = 0;
 		for (; y < 16; y++) {
 			printk_info("%02x ",
-				    pci_rawread_config8(PCI_DEV
+				    pci_rawread_config8(PCI_RAWDEV
 							(0, 0x10, 4),
 							x * 16 + y));
 		}
@@ -723,7 +723,7 @@ void hardwaremain(int boot_complete)
 	printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__);
 
 
-//          pci_rawwrite_config16(PCI_DEV(0, 0xf, 0), 0xBA, 0x0571);
+//          pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, 0x0571);
 
 #if 0
 	x = y = 0;
@@ -732,7 +732,7 @@ void hardwaremain(int boot_complete)
 		y = 0;
 		for (; y < 16; y++) {
 			printk_info("%02x ",
-				    pci_rawread_config8(PCI_DEV
+				    pci_rawread_config8(PCI_RAWDEV
 							(0, 0x10, 4),
 							x * 16 + y));
 		}
@@ -743,10 +743,10 @@ void hardwaremain(int boot_complete)
 
 #if 0
 
-	y = pci_rawread_config8(PCI_DEV(0, 0xf, 0), 0x0d);
+	y = pci_rawread_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d);
 	y &= 0x0f;
 	y |= 0x40;
-	pci_rawwrite_config8(PCI_DEV(0, 0xf, 0), 0x0d, y);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d, y);
 #endif
 
 #if 0
@@ -948,41 +948,41 @@ void hardwaremain(int boot_complete)
 	u8 i;
 /* error form ---- but add the chance to resume
 for(i=0;i<5;i++){
-		pci_rawwrite_config8(PCI_DEV(0, 0, 0), i, d0f0pcitable[i+0xcb]);
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i, d0f0pcitable[i+0xcb]);
 	}
 
-	
+
 */
 
 /* RO reg
 for(i=0;i<5;i++){
-		pci_rawwrite_config8(PCI_DEV(0, 0, 0), i+0xcb, d0f0pcitable[i]);
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i+0xcb, d0f0pcitable[i]);
 	}
 */
 
 
-//boot ok, resume still err in linux    
+//boot ok, resume still err in linux
 #if 1
 	for (i = 0; i < 9; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 0, 2), i + 0x50,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
 				     d0f2pcitable[i]);
 	}
 	//9 is warm reset reg,   // boot err in coreboot
 	for (i = 10; i < 64; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 0, 2), i + 0x50,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
 				     d0f2pcitable[i]);
 	}
 	//0x90 look d0f2 appendixA1 ,   if set this to 09 or 0b, then some ddr2 will crash.
 	for (i = 65; i < 113; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 0, 2), i + 0x50,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), i + 0x50,
 				     d0f2pcitable[i]);
 	}
 #endif
 #ifdef OPTION_1
-	pci_rawwrite_config8(PCI_DEV(0, 0, 2), 0x66, 0x09);
-	pci_rawwrite_config8(PCI_DEV(0, 0, 2), 0x70, 0xdd);
-	//  pci_rawwrite_config8(PCI_DEV(0, 0, 2), 0x90, 0x09);
-	pci_rawwrite_config8(PCI_DEV(0, 0, 2), 0x92, 0x40);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x66, 0x09);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x70, 0xdd);
+	//  pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x90, 0x09);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 2), 0x92, 0x40);
 
 #endif
 
@@ -991,63 +991,63 @@ for(i=0;i<5;i++){
 #if 1
 
 
-//d0f3 
+//d0f3
 /*		*/
-	//      pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0x86, 0x3b);  setting, my lspci is 0x29
+	//      pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x3b);  setting, my lspci is 0x29
 	//set bit4 cause the ide not be found
-//              pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0x86, 0x2b);
+//              pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x2b);
 	//set bit1 cause the ide not be found
 
-//              pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0x86, 0x29);
-	pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0x95, 0x05);
-	pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0x99, 0x12);
+//              pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x86, 0x29);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x95, 0x05);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0x99, 0x12);
 
-	pci_rawwrite_config8(PCI_DEV(0, 0, 3), 0xde, 0x00);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0xde, 0x00);
 #endif
 
-//boot ok,  resume err in coreboot 
+//boot ok,  resume err in coreboot
 #if 1
 	for (i = 0; i < 99; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 0, 4), i + 0x8d,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), i + 0x8d,
 				     d0f4pcitable[i]);
 	}
 #endif
 
 #ifdef OPTION_1
-	pci_rawwrite_config8(PCI_DEV(0, 0, 4), 0xe9, 0x90);
-	pci_rawwrite_config8(PCI_DEV(0, 0, 4), 0xec, 0x0);
-	pci_rawwrite_config8(PCI_DEV(0, 0, 4), 0xed, 0x0);
-	pci_rawwrite_config8(PCI_DEV(0, 0, 4), 0xee, 0x0);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xe9, 0x90);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xec, 0x0);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xed, 0x0);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xee, 0x0);
 #endif
 
 
 #if 1
-//boot ok, resume still err in linux    
+//boot ok, resume still err in linux
 	for (i = 0; i < 160; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 0, 5), i + 0x60,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 5), i + 0x60,
 				     d0f5pcitable[i]);
 	}
 	for (i = 0; i < 144; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 0, 7), i + 0x60,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), i + 0x60,
 				     d0f7pcitable[i]);
 	}
 	for (i = 0; i < 3; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 1, 0), i + 0xb0,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 1, 0), i + 0xb0,
 				     d1f0pcitable[i]);
 	}
 	for (i = 0; i < 96; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 0xc, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), i + 0x40,
 				     dcf0pcitable[i]);
 	}
 #endif
 
 #ifdef OPTION_1
-	pci_rawwrite_config8(PCI_DEV(0, 0, 7), 0x61, 0x0);
-	pci_rawwrite_config8(PCI_DEV(0, 0, 7), 0x63, 0x0);
-	pci_rawwrite_config8(PCI_DEV(0, 0, 7), 0x76, 0xd0);
-	pci_rawwrite_config8(PCI_DEV(0, 0xc, 0), 0x88, 0x81);
-	pci_rawwrite_config8(PCI_DEV(0, 0xc, 0), 0x89, 0x01);
-	pci_rawwrite_config8(PCI_DEV(0, 0xc, 0), 0x8A, 0x60);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x61, 0x0);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x63, 0x0);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 7), 0x76, 0xd0);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x88, 0x81);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x89, 0x01);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0xc, 0), 0x8A, 0x60);
 #endif
 
 //d15f0
@@ -1057,24 +1057,24 @@ for(i=0;i<5;i++){
 
 #if 1
 
-	pci_rawwrite_config8(PCI_DEV(0, 0x10, 0), 0x4a, 0xa2);	// no affect.
-	pci_rawwrite_config8(PCI_DEV(0, 0x10, 1), 0x4a, 0xa2);
-	pci_rawwrite_config8(PCI_DEV(0, 0x10, 2), 0x4a, 0xa2);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 0), 0x4a, 0xa2);	// no affect.
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 1), 0x4a, 0xa2);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 2), 0x4a, 0xa2);
 
 //boot ok, resume still err in linux,  and if disable USB, then all ok
 //      for(i=0;i<48;i++){
 	for (i = 0; i < 44; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 0x10, 4), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), i + 0x40,
 				     d10f4pcitable[i]);
 	}
 #endif
 
 //#ifdef NOOPTION_1
 #if 0
-	pci_rawwrite_config8(PCI_DEV(0, 0x10, 4), 0x6b, 0x01);
-	pci_rawwrite_config8(PCI_DEV(0, 0x10, 4), 0x6d, 0x00);
-	pci_rawwrite_config8(PCI_DEV(0, 0x10, 4), 0x6e, 0x08);
-	pci_rawwrite_config8(PCI_DEV(0, 0x10, 4), 0x6f, 0x80);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6b, 0x01);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6d, 0x00);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6e, 0x08);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6f, 0x80);
 #endif
 
 
@@ -1083,171 +1083,171 @@ for(i=0;i<5;i++){
 //before (11.0)is add, s3 resume has already always dead in first resume(more frequenly), and sleep ok
 //      for(i=0;i<192;i++){
 	for (i = 0; i < 6; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     d11f0pcitable[i]);
 	}
 	//6 is uart and dvp vcp,   will have // HAVE no com1 ,and no gui show,textmode ok ,s3 sleep ok, resume fail
 
 	//7-18 is my familar part
-	for (i = 7; i < 18; i++) {	//sleep ok ,resume sleep err 2 
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+	for (i = 7; i < 18; i++) {	//sleep ok ,resume sleep err 2
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     d11f0pcitable[i]);
 	}
 
 
-	for (i = 18; i < 21; i++) {	//sleep ok ,   sleep err 1, resume 
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+	for (i = 18; i < 21; i++) {	//sleep ok ,   sleep err 1, resume
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     d11f0pcitable[i]);
 	}
 	//0x55 56 57 irq intA#B#C# linkA#linkB#linkC#
 	for (i = 24; i < 27; i++) {	//sleep ok , resume sleep err 1  resume  1
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     d11f0pcitable[i]);
 	}
 	//5b port 80h
-	pci_rawmodify_config8(PCI_DEV(0, 0x11, 0), 0x5b, 0x0, 0x08);
+	pci_rawmodify_config8(PCI_RAWDEV(0, 0x11, 0), 0x5b, 0x0, 0x08);
 	//          i++;
-	//      pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i+0x40, d11f0pcitable[i]);
+	//      pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i+0x40, d11f0pcitable[i]);
 
 	for (i = 28; i < 72; i++) {	//sleep ok , resume  sleep err 1 , resume 1ci
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     d11f0pcitable[i]);
 	}
 	//7273ACPI BASE
 
 	for (i = 74; i < 112; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     d11f0pcitable[i]);
 	}
 
 	//B0B4B5 dvp vcp,  if copy this ,then no uart, no gui(of unbuntu)
-	// pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), 0xb0, d11f0pcitable[112]);
-	i = pci_rawread_config8(PCI_DEV(0, 17, 0), 0xB0);
+	// pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0xb0, d11f0pcitable[112]);
+	i = pci_rawread_config8(PCI_RAWDEV(0, 17, 0), 0xB0);
 	//multiplex with VCP
 	//    i = i | 0x30;
 	i = i & 0xf7;
-	pci_rawwrite_config8(PCI_DEV(0, 17, 0), 0xB0, i);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 17, 0), 0xB0, i);
 
 
 
 	for (i = 113; i < 114; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     d11f0pcitable[i]);
 	}
 
 	for (i = 115; i < 116; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     d11f0pcitable[i]);
 	}
 
 
 	for (i = 118; i < 192; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     d11f0pcitable[i]);
 	}
 #endif
 #ifdef NOOPTION_1
 //      for(i=0;i<192;i++){
 	for (i = 0; i < 6; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     OPTION_1_d11f0pcitable[i]);
 	}
 	//6 is uart and dvp vcp,   will have // HAVE no com1 ,and no gui show,textmode ok ,s3 sleep ok, resume fail
 
 	//7-18 is my familar part
 	for (i = 7; i < 18; i++) {	//   sleep err 2
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     OPTION_1_d11f0pcitable[i]);
 	}
 
 	for (i = 18; i < 21; i++) {	//sleep ok , resume ???
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     d11f0pcitable[i]);
 	}
 	//0x55 56 57 irq intA#B#C# linkA#linkB#linkC#
 	for (i = 24; i < 27; i++) {	//sleep ok , resume ???
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     d11f0pcitable[i]);
 	}
 	//5b port 80h
 	i++;
-	pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 			     OPTION_1_d11f0pcitable[i]);
 
 	for (i = 28; i < 72; i++) {	//sleep ok , resume???
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     OPTION_1_d11f0pcitable[i]);
 	}
 	//7273ACPI BASE
 
 	for (i = 74; i < 112; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     OPTION_1_d11f0pcitable[i]);
 	}
 
 	//B0B4B5 dvp vcp,  if copy this ,then no uart, no gui(of unbuntu)
-	// pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), 0xb0, OPTION_1_d11f0pcitable[112]);
-	i = pci_rawread_config8(PCI_DEV(0, 17, 0), 0xB0);
+	// pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0xb0, OPTION_1_d11f0pcitable[112]);
+	i = pci_rawread_config8(PCI_RAWDEV(0, 17, 0), 0xB0);
 	//multiplex with VCP
 	//    i = i | 0x30;
 	i = i & 0xf7;
-	pci_rawwrite_config8(PCI_DEV(0, 17, 0), 0xB0, i);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 17, 0), 0xB0, i);
 
 
 
 	for (i = 113; i < 114; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     OPTION_1_d11f0pcitable[i]);
 	}
 
 	for (i = 115; i < 116; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     OPTION_1_d11f0pcitable[i]);
 	}
 
 	for (i = 118; i < 192; i++) {	//boot ok, resume still err in linux
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
 				     OPTION_1_d11f0pcitable[i]);
 	}
 #endif
 
 #if 1
-	pci_rawwrite_config16(PCI_DEV(0, 0xf, 0), 0xBA, PCI_DEVICE_ID_VIA_VX855_IDE);	//5324
-	pci_rawwrite_config16(PCI_DEV(0, 0xf, 0), 0xBE,
+	pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, PCI_DEVICE_ID_VIA_VX855_IDE);	//5324
+	pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBE,
 			      PCI_DEVICE_ID_VIA_VX855_IDE);
-	pci_rawwrite_config16(PCI_DEV(0, 0x11, 0), 0xA0,
+	pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0xA0,
 			      PCI_VENDOR_ID_VIA);
-	pci_rawwrite_config16(PCI_DEV(0, 0x11, 0), 0xA2, PCI_DEVICE_ID_VIA_VX855_LPC);	//8353
-	i = pci_rawread_config8(PCI_DEV(0, 0x11, 0), 0x79);
+	pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0xA2, PCI_DEVICE_ID_VIA_VX855_LPC);	//8353
+	i = pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x79);
 	i &= ~0x40;
 	i |= 0x40;
-	pci_rawwrite_config8(PCI_DEV(0, 0x11, 0), 0x79, i);
-	pci_rawwrite_config16(PCI_DEV(0, 0x11, 0), 0x72,
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), 0x79, i);
+	pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0x72,
 			      PCI_DEVICE_ID_VIA_VX855_LPC);
 
 
 //boot ok, resume still err in linux
 	for (i = 0; i < 192; i++) {
-		pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), i + 0x40,
+		pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), i + 0x40,
 				     d11f7pcitable[i]);
 	}
 #endif
 #ifdef OPTION_1
-	pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0x61, 0x2a);
-	pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0x63, 0xa0);
-	pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0x64, 0xaa);
-	pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0x84, 0x0);
-	pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0x88, 0x02);
-	pci_rawwrite_config8(PCI_DEV(0, 0x11, 7), 0xe6, 0x3f);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x61, 0x2a);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x63, 0xa0);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x64, 0xaa);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x84, 0x0);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x88, 0x02);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0xe6, 0x3f);
 #endif
 
-	pci_rawwrite_config8(PCI_DEV(0, 0x14, 0), 0x40, 0x20);
-	pci_rawwrite_config8(PCI_DEV(0, 0x14, 0), 0x41, 0x31);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x20);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x41, 0x31);
 
 
 
 #ifdef OPTION_1
-	pci_rawwrite_config8(PCI_DEV(0, 0x14, 0), 0x40, 0x00);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x00);
 #endif
 
 
@@ -1256,11 +1256,11 @@ for(i=0;i<5;i++){
 	u8 i911;
 	//disable CHB L.L
 	//set VGA memory selection
-	i911 = pci_rawread_config8(PCI_DEV(0, 0x1, 0), 0xb0);
+	i911 = pci_rawread_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0);
 	i911 &= 0xF8;
 	//ByteVal |= 0x03;
 	i911 |= 0x01;
-	pci_rawwrite_config8(PCI_DEV(0, 0x1, 0), 0xb0, i911);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0, i911);
 
 
 #if 1
@@ -1290,8 +1290,8 @@ for(i=0;i<5;i++){
 
 
 
-	//pci_rawmodify_config8(PCI_DEV(0, 0x10, 4), 0x04, 0x17, 0x17);//
-//      pci_rawmodify_config8(PCI_DEV(0, 0x10, 4), 0x0c, 0x08, 0xff);///
+	//pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x04, 0x17, 0x17);//
+//      pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x0c, 0x08, 0xff);///
 
 
 
diff --git a/src/northbridge/via/vx800/pci_rawops.h b/src/northbridge/via/vx800/pci_rawops.h
new file mode 100644
index 0000000000..cfeb8394fd
--- /dev/null
+++ b/src/northbridge/via/vx800/pci_rawops.h
@@ -0,0 +1,267 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2009 One Laptop per Child, Association, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+#ifndef ARCH_I386_PCI_RAWOPS_H
+# define ARCH_I386_PCI_RAWOPS_H 1
+#include <stdint.h>
+
+#define PCI_RAWDEV(SEGBUS, DEV, FN) ( \
+        (((SEGBUS) & 0xFFF) << 20) | \
+        (((DEV) & 0x1F) << 15) | \
+        (((FN)  & 0x07) << 12))
+struct  VIA_PCI_REG_INIT_TABLE {
+	u8 ChipRevisionStart;
+	u8 ChipRevisionEnd;
+	u8 Bus;
+	u8 Device;
+	u8 Function;
+        u32 Register;
+	u8 Mask;
+	u8 Value;
+};
+typedef unsigned device_t_raw; /* pci and pci_mmio need to have different ways to have dev */
+
+/* FIXME: We need to make the coreboot to run at 64bit mode, So when read/write memory above 4G,
+ * We don't need to set %fs, and %gs anymore
+ * Before that We need to use %gs, and leave %fs to other RAM access
+ */
+ uint8_t pci_io_rawread_config8(device_t_raw dev, unsigned where)
+{
+	unsigned addr;
+#if PCI_IO_CFG_EXT == 0
+	addr = (dev>>4) | where;
+#else
+	addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16); //seg == 0
+#endif
+	outl(0x80000000 | (addr & ~3), 0xCF8);
+	return inb(0xCFC + (addr & 3));
+}
+
+#if MMCONF_SUPPORT
+ uint8_t pci_mmio_rawread_config8(device_t_raw dev, unsigned where)
+{
+        unsigned addr;
+        addr = dev | where;
+        return read8x(addr);
+}
+#endif
+ uint8_t pci_rawread_config8(device_t_raw dev, unsigned where)
+{
+#if MMCONF_SUPPORT
+	return pci_mmio_rawread_config8(dev, where);
+#else
+	return pci_io_rawread_config8(dev, where);
+#endif
+}
+
+ uint16_t pci_io_rawread_config16(device_t_raw dev, unsigned where)
+{
+	unsigned addr;
+#if PCI_IO_CFG_EXT == 0
+        addr = (dev>>4) | where;
+#else
+        addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16);
+#endif
+	outl(0x80000000 | (addr & ~3), 0xCF8);
+	return inw(0xCFC + (addr & 2));
+}
+
+#if MMCONF_SUPPORT
+ uint16_t pci_mmio_rawread_config16(device_t_raw dev, unsigned where)
+{
+        unsigned addr;
+        addr = dev | where;
+        return read16x(addr);
+}
+#endif
+
+ uint16_t pci_rawread_config16(device_t_raw dev, unsigned where)
+{
+#if MMCONF_SUPPORT
+	return pci_mmio_rawread_config16(dev, where);
+#else
+        return pci_io_rawread_config16(dev, where);
+#endif
+}
+
+
+ uint32_t pci_io_rawread_config32(device_t_raw dev, unsigned where)
+{
+	unsigned addr;
+#if PCI_IO_CFG_EXT == 0
+        addr = (dev>>4) | where;
+#else
+        addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16);
+#endif
+	outl(0x80000000 | (addr & ~3), 0xCF8);
+	return inl(0xCFC);
+}
+
+#if MMCONF_SUPPORT
+ uint32_t pci_mmio_rawread_config32(device_t_raw dev, unsigned where)
+{
+        unsigned addr;
+        addr = dev | where;
+        return read32x(addr);
+}
+#endif
+
+ uint32_t pci_rawread_config32(device_t_raw dev, unsigned where)
+{
+#if MMCONF_SUPPORT
+	return pci_mmio_rawread_config32(dev, where);
+#else
+        return pci_io_rawread_config32(dev, where);
+#endif
+}
+
+ void pci_io_rawwrite_config8(device_t_raw dev, unsigned where, uint8_t value)
+{
+	unsigned addr;
+#if PCI_IO_CFG_EXT == 0
+        addr = (dev>>4) | where;
+#else
+        addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16);
+#endif
+	outl(0x80000000 | (addr & ~3), 0xCF8);
+	outb(value, 0xCFC + (addr & 3));
+}
+
+#if MMCONF_SUPPORT
+ void pci_mmio_rawwrite_config8(device_t_raw dev, unsigned where, uint8_t value)
+{
+        unsigned addr;
+        addr = dev | where;
+        write8x(addr, value);
+}
+#endif
+
+ void pci_rawwrite_config8(device_t_raw dev, unsigned where, uint8_t value)
+{
+#if MMCONF_SUPPORT
+	pci_mmio_rawwrite_config8(dev, where, value);
+#else
+        pci_io_rawwrite_config8(dev, where, value);
+#endif
+}
+
+
+ void pci_io_rawwrite_config16(device_t_raw dev, unsigned where, uint16_t value)
+{
+        unsigned addr;
+#if PCI_IO_CFG_EXT == 0
+        addr = (dev>>4) | where;
+#else
+        addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16);
+#endif
+        outl(0x80000000 | (addr & ~3), 0xCF8);
+        outw(value, 0xCFC + (addr & 2));
+}
+
+#if MMCONF_SUPPORT
+ void pci_mmio_rawwrite_config16(device_t_raw dev, unsigned where, uint16_t value)
+{
+        unsigned addr;
+        addr = dev | where;
+        write16x(addr, value);
+}
+#endif
+
+ void pci_rawwrite_config16(device_t_raw dev, unsigned where, uint16_t value)
+{
+#if MMCONF_SUPPORT
+	pci_mmio_rawwrite_config16(dev, where, value);
+#else
+	pci_io_rawwrite_config16(dev, where, value);
+#endif
+}
+
+
+ void pci_io_rawwrite_config32(device_t_raw dev, unsigned where, uint32_t value)
+{
+	unsigned addr;
+#if PCI_IO_CFG_EXT == 0
+        addr = (dev>>4) | where;
+#else
+        addr = (dev>>4) | (where & 0xff) | ((where & 0xf00)<<16);
+#endif
+	outl(0x80000000 | (addr & ~3), 0xCF8);
+	outl(value, 0xCFC);
+}
+
+#if MMCONF_SUPPORT
+ void pci_mmio_rawwrite_config32(device_t_raw dev, unsigned where, uint32_t value)
+{
+        unsigned addr;
+        addr = dev | where;
+        write32x(addr, value);
+}
+#endif
+
+ void pci_rawwrite_config32(device_t_raw dev, unsigned where, uint32_t value)
+{
+#if MMCONF_SUPPORT
+	pci_mmio_rawwrite_config32(dev, where, value);
+#else
+        pci_io_rawwrite_config32(dev, where, value);
+#endif
+}
+
+
+void pci_rawmodify_config8(device_t_raw dev, unsigned where, u8 orval,u8 mask)
+{     u8 data=pci_rawread_config8(dev,where);
+       data&=(~mask);
+       data|=orval;
+       pci_rawwrite_config8(dev,where,data);
+}
+void pci_rawmodify_config16(device_t_raw dev, unsigned where, uint16_t orval,uint16_t mask)
+{     uint16_t data=pci_rawread_config16(dev,where);
+       data&=(~mask);
+       data|=orval;
+       pci_rawwrite_config16(dev,where,data);
+}
+void pci_rawmodify_config32(device_t_raw dev, unsigned where, uint32_t orval,uint32_t mask)
+{     uint32_t data=pci_rawread_config32(dev,where);
+       data&=(~mask);
+       data|=orval;
+       pci_rawwrite_config32(dev,where,data);
+}
+
+void io_rawmodify_config8(u16 where, uint8_t orval,uint8_t mask)
+{
+	u8 data=inb(where);
+       data&=(~mask);
+       data|=orval;
+       outb(data,where);
+}
+
+void via_pci_inittable(u8 chipversion,struct VIA_PCI_REG_INIT_TABLE* initdata)
+{
+        u8 i=0;
+	device_t_raw devbxdxfx;
+	for(i=0;;i++)	{
+			if((initdata[i].Mask==0)&&(initdata[i].Value==0)&&(initdata[i].Bus==0)&&(initdata[i].ChipRevisionEnd==0xff)&&(initdata[i].ChipRevisionStart==0)&&(initdata[i].Device==0)&&(initdata[i].Function==0)&&(initdata[i].Register==0))
+				break;
+			if((chipversion>=initdata[i].ChipRevisionStart)&&(chipversion<=initdata[i].ChipRevisionEnd)){
+				devbxdxfx=PCI_RAWDEV(initdata[i].Bus,initdata[i].Device,initdata[i].Function);
+				pci_rawmodify_config8(devbxdxfx, initdata[i].Register,initdata[i].Value,initdata[i].Mask);
+			}
+	}
+}
+#endif
diff --git a/src/northbridge/via/vx800/uma_ram_setting.c b/src/northbridge/via/vx800/uma_ram_setting.c
index 91329e21ea..6988ffe4b0 100644
--- a/src/northbridge/via/vx800/uma_ram_setting.c
+++ b/src/northbridge/via/vx800/uma_ram_setting.c
@@ -173,10 +173,10 @@ void SetUMARam(void)
 	pci_write_config32(vga_dev, 0x14, Tmp);
 
 //enable direct cpu frame buffer access
-	i = pci_conf1_read8(PCI_DEV(0, 0, 3), 0xa1);
+	i = pci_rawread_config8(PCI_RAWDEV(0, 0, 3), 0xa1);
 	i = (i & 0xf0) | (VIACONFIG_VGA_PCI_10 >> 28);
-	pci_conf1_write8(PCI_DEV(0, 0, 3), 0xa1, i);
-	pci_conf1_write8(PCI_DEV(0, 0, 3), 0xa0, 0x01);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0xa1, i);
+	pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0xa0, 0x01);
 
 	//enable GFx memory space access control for S.L and mmio
 	ByteVal = pci_read_config8(d0f0_dev, 0xD4);