mb/google/hades: Add variant device tree

Follow 03_16 schematic to add the device tree.

BUG=b:272816611
TEST=abuild -a -x -c max -p none -t google/brya -b hades

Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I85a05fec816954fd3408feccae84e0b9860ecdc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73838
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>

2 files changed, 368 insertions, 1 deletions

diff --git a/src/mainboard/google/brya/Kconfig.name b/src/mainboard/google/brya/Kconfig.name
index f8e24a1618..d9522efd92 100644
--- a/src/mainboard/google/brya/Kconfig.name
+++ b/src/mainboard/google/brya/Kconfig.name
@@ -351,6 +351,11 @@ config BOARD_GOOGLE_AURASH
 config BOARD_GOOGLE_HADES
 	bool "->  Hades"
 	select BOARD_GOOGLE_BASEBOARD_HADES
+	select DRIVERS_GENESYSLOGIC_GL9750
+	select PCIEXP_SUPPORT_RESIZABLE_BARS
+	select RT8168_GEN_ACPI_POWER_RESOURCE
+	select RT8168_GET_MAC_FROM_VPD
+	select RT8168_SET_LED_MODE
 
 config BOARD_GOOGLE_ULDREN
 	bool "->  Uldren"
diff --git a/src/mainboard/google/brya/variants/hades/overridetree.cb b/src/mainboard/google/brya/variants/hades/overridetree.cb
index ee861420f6..d91492adc3 100644
--- a/src/mainboard/google/brya/variants/hades/overridetree.cb
+++ b/src/mainboard/google/brya/variants/hades/overridetree.cb
@@ -1,4 +1,366 @@
 chip soc/intel/alderlake
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| I2C0              | Audio                     |
+	#| I2C1              | GPU                       |
+	#| I2C2              | External graphic          |
+	#| I2C3              | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#| I2C5              | Trackpad                  |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 650,
+			.fall_time_ns = 400,
+			.data_hold_time_ns = 50,
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 650,
+			.fall_time_ns = 300,
+			.data_hold_time_ns = 50,
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 650,
+			.fall_time_ns = 300,
+			.data_hold_time_ns = 50,
+		},
+		.i2c[3] = {
+			.early_init = 1,
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 600,
+			.fall_time_ns = 400,
+			.data_hold_time_ns = 50,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 650,
+			.fall_time_ns = 400,
+			.data_hold_time_ns = 50,
+		},
+	}"
+
+	register "tcc_offset" = "3"     # TCC of 97
+	register "sagv" = "SaGv_Disabled"
+
+	register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC1)"	# USB2_C0
+	register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC2)"	# USB2_C1
+	register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"	# UCAM
+	register "usb2_ports[7]" = "USB2_PORT_MID(OC0)"	# Type-A Port A1
+	register "usb2_ports[8]" = "USB2_PORT_MID(OC3)"	# Type-A Port A0
+	register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)"	# M.2 Bluetooth
+
+	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"	# USB3/2 Type A port A1
+	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)"	# USB3/2 Type A port A0
+
+	register "tcss_ports[0]" = "TCSS_PORT_DEFAULT(OC2)"	# Typc-C Port C1
+	register "tcss_ports[2]" = "TCSS_PORT_DEFAULT(OC1)"	# Typc-C Port C0
+
+	register "serial_io_i2c_mode" = "{
+		[PchSerialIoIndexI2C0] = PchSerialIoPci,
+		[PchSerialIoIndexI2C1] = PchSerialIoPci,
+		[PchSerialIoIndexI2C2] = PchSerialIoPci,
+		[PchSerialIoIndexI2C3] = PchSerialIoPci,
+		[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
+		[PchSerialIoIndexI2C5] = PchSerialIoPci,
+	}"
+
         device domain 0 on
-        end
+		device ref pcie4_0 on
+			# Enable CPU PCIe RP 1 using CLKREQ 0 and CLKSRC 0
+			register "cpu_pcie_rp[CPU_RP(1)]" = "{
+				.clk_req = 0,
+				.clk_src = 0,
+				.flags = PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+			device pci 00.0 alias dgpu on end
+		end
+		device ref dtt on
+			chip drivers/intel/dptf
+				## sensor information
+				register "options.tsr[0].desc" = ""DRAM""
+				register "options.tsr[1].desc" = ""GPU""
+				register "options.tsr[2].desc" = ""Charger""
+				# TODO: below values are initial reference values only
+				## Active Policy
+				register "policies.active" = "{
+					[0] = {
+						.target = DPTF_CPU,
+						.thresholds = {
+								TEMP_PCT(85, 90),
+								TEMP_PCT(80, 80),
+								TEMP_PCT(75, 70),
+								TEMP_PCT(70, 50),
+								TEMP_PCT(65, 30),
+						}
+					},
+					[1] = {
+						.target = DPTF_TEMP_SENSOR_1,
+						.thresholds = {
+								TEMP_PCT(50, 90),
+								TEMP_PCT(48, 70),
+								TEMP_PCT(46, 60),
+								TEMP_PCT(43, 40),
+								TEMP_PCT(40, 30),
+						}
+					}
+				}"
+				## Passive Policy
+				register "policies.passive" = "{
+					[0] = DPTF_PASSIVE(CPU,         CPU,           95, 5000),
+					[1] = DPTF_PASSIVE(CPU,         TEMP_SENSOR_0, 75, 5000),
+					[2] = DPTF_PASSIVE(CPU,		TEMP_SENSOR_1, 75, 5000),
+					[3] = DPTF_PASSIVE(CHARGER,     TEMP_SENSOR_2, 75, 5000),
+				}"
+				## Critical Policy
+				register "policies.critical" = "{
+					[0] = DPTF_CRITICAL(CPU,               105, SHUTDOWN),
+					[1] = DPTF_CRITICAL(TEMP_SENSOR_0,     105, SHUTDOWN),
+					[2] = DPTF_CRITICAL(TEMP_SENSOR_1,     105, SHUTDOWN),
+					[3] = DPTF_CRITICAL(TEMP_SENSOR_2,     105, SHUTDOWN),
+				}"
+				register "controls.power_limits" = "{
+					.pl1 = {
+							.min_power = 3000,
+							.max_power = 15000,
+							.time_window_min = 28 * MSECS_PER_SEC,
+							.time_window_max = 32 * MSECS_PER_SEC,
+							.granularity = 200,
+						},
+					.pl2 = {
+							.min_power = 55000,
+							.max_power = 55000,
+							.time_window_min = 28 * MSECS_PER_SEC,
+							.time_window_max = 32 * MSECS_PER_SEC,
+							.granularity = 1000,
+						}
+				}"
+				register "oem_data.oem_variables" = "{
+						[0] = 0x0
+				}"
+				## Charger Performance Control (Control, mA)
+				register "controls.charger_perf" = "{
+					[0] = { 255, 1700 },
+					[1] = {  24, 1500 },
+					[2] = {  16, 1000 },
+					[3] = {   8,  500 }
+				}"
+				## Fan Performance Control (Percent, Speed, Noise, Power)
+				register "controls.fan_perf" = "{
+					[0] = {  90, 4700, 220, 2200, },
+					[1] = {  80, 4500, 180, 1800, },
+					[2] = {  70, 4300, 145, 1450, },
+					[3] = {  60, 3700, 115, 1150, },
+					[4] = {  50, 3300,  90,  900, },
+					[5] = {  40, 3100,  55,  550, },
+					[6] = {  30, 2800,  30,  300, },
+					[7] = {  20, 2500,  15,  150, },
+					[8] = {  10, 2300,  10,  100, },
+					[9] = {   0,    0,   0,   50, }
+				}"
+
+				## Fan options
+				register "options.fan.fine_grained_control" = "1"
+				register "options.fan.step_size" = "2"
+
+				device generic 0 alias dptf_policy on end
+			end
+		end
+		device ref cnvi_wifi on
+			chip drivers/wifi/generic
+				register "wake" = "GPE0_PME_B0"
+				device generic 0 on end
+			end
+		end
+		device ref i2c0 on
+			chip drivers/i2c/generic
+				register "hid" = ""RTL5682""
+				register "name" = ""RT58""
+				register "desc" = ""Headset Codec""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
+		end #I2C0
+		device ref i2c1 on end # GPU
+		device ref i2c2 on end # External GPU
+		device ref i2c3 on
+			chip drivers/i2c/tpm
+				register "hid" = ""GOOG0005""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
+				device i2c 50 on end
+			end
+		end
+		device ref i2c5 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
+				register "wake" = "GPE0_DW2_14"
+				register "detect" = "1"
+				device i2c 15 on end
+			end
+		end
+		device ref pcie_rp3 on
+			# Enable PCIE 3 using clk 4
+			register "pch_pcie_rp[PCH_RP(3)]" = "{
+				.clk_src = 4,
+				.clk_req = 4,
+				.flags = PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+			chip drivers/net
+				register "customized_leds" = "0x05af"
+				register "wake" = "GPE0_DW0_07"
+				register "device_index" = "0"
+				register "add_acpi_dma_property" = "true"
+				device pci 00.0 on end
+			end
+		end 	#RTL8111H Ethernet NIC
+		device ref pcie_rp4 off end
+		device ref pcie_rp6 off end
+		device ref pcie_rp7 off end
+		device ref pcie_rp8 on
+			chip soc/intel/common/block/pcie/rtd3
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)"
+				register "srcclk_pin" = "3"
+				device generic 0 on end
+			end
+			# Enable SD Card PCIE 8 using clk 3
+			register "pch_pcie_rp[PCH_RP(8)]" = "{
+				.clk_src = 3,
+				.clk_req = 3,
+				.flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+		end	#PCIE8 SD card
+		device ref pcie_rp9 on
+			# Enable NVMe PCIE 9 using clk 1
+			register "pch_pcie_rp[PCH_RP(9)]" = "{
+				.clk_src = 1,
+				.clk_req = 1,
+				.flags = PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+		end	#PCIE9-12 SSD
+		device ref hda on
+			chip drivers/generic/max98357a
+				register "hid" = ""MX98360A""
+				register "sdmode_gpio" =
+					"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
+				register "sdmode_delay" = "5"
+				device generic 0 on end
+			end
+                end
+		device ref pch_espi on
+			chip ec/google/chromeec
+				use conn0 as mux_conn[0]
+				use conn1 as mux_conn[1]
+				device pnp 0c09.0 on end
+			end
+		end
+		device ref pmc hidden
+			chip drivers/intel/pmc_mux
+				device generic 0 on
+					chip drivers/intel/pmc_mux/conn
+						use usb2_port1 as usb2_port
+						use tcss_usb3_port3 as usb3_port
+						device generic 0 alias conn0 on end
+					end
+					chip drivers/intel/pmc_mux/conn
+						use usb2_port3 as usb2_port
+						use tcss_usb3_port1 as usb3_port
+						device generic 1 alias conn1 on end
+					end
+				end
+			end
+		end
+		device ref tcss_xhci on
+			chip drivers/usb/acpi
+				device ref tcss_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C1 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						device ref tcss_usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(2, 1))"
+						device ref tcss_usb3_port3 on end
+					end
+				end
+			end
+		end
+		device ref xhci on
+			chip drivers/usb/acpi
+				device ref xhci_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						device ref usb2_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C1 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, RIGHT, ACPI_PLD_GROUP(2, 1))"
+						device ref usb2_port3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb2_port6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port 1""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 2))"
+						device ref usb2_port8 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port 0""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
+						device ref usb2_port9 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
+						device ref usb2_port10 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port 1""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(3, 1))"
+						device ref usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port 0""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 2))"
+						device ref usb3_port2 on end
+					end
+				end
+			end
+		end
+	end
 end