diff options
| author | Aamir Bohra <aamir.bohra@intel.com> | 2019-12-06 19:40:47 +0530 |
|---|---|---|
| committer | Subrata Banik <subrata.banik@intel.com> | 2019-12-16 09:49:07 +0000 |
| commit | 03f78b069d4f4fe0aa2a3ec67117e0c478da3b72 (patch) | |
| tree | 4112cbd1237afdd257834ef99a9b2fe1021fcbfb /src | |
| parent | bf14c0050c694df862b766096e49cf1a6ab42f3a (diff) | |
vendorcode/intel/fsp: Add Jasper Lake FSP headers for FSP v1433
The FSP-M/S/T headers added are generated as per FSP v1433.
Change-Id: Iacb44204c3f7220a20ab3edc2163c97188014bbf
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37559
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src')
6 files changed, 1869 insertions, 0 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FirmwareVersionInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FirmwareVersionInfoHob.h new file mode 100644 index 0000000000..373c167186 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FirmwareVersionInfoHob.h @@ -0,0 +1,68 @@ +/** @file + Header file for Firmware Version Information + + @copyright + Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> + + This program and the accompanying materials are licensed and made available under + the terms and conditions of the BSD License which accompanies this distribution. + The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef _FIRMWARE_VERSION_INFO_HOB_H_ +#define _FIRMWARE_VERSION_INFO_HOB_H_ + +#include <Uefi/UefiMultiPhase.h> +#include <Pi/PiBootMode.h> +#include <Pi/PiHob.h> + +#pragma pack(1) +/// +/// Firmware Version Structure +/// +typedef struct { + UINT8 MajorVersion; + UINT8 MinorVersion; + UINT8 Revision; + UINT16 BuildNumber; +} FIRMWARE_VERSION; + +/// +/// Firmware Version Information Structure +/// +typedef struct { + UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name + UINT8 VersionStringIndex; ///< Offset 1 Index of Version String + FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version +} FIRMWARE_VERSION_INFO; + +#ifndef __SMBIOS_STANDARD_H__ +/// +/// The Smbios structure header. +/// +typedef struct { + UINT8 Type; + UINT8 Length; + UINT16 Handle; +} SMBIOS_STRUCTURE; +#endif + +/// +/// Firmware Version Information HOB Structure +/// +typedef struct { + EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB + SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB + UINT8 Count; ///< Offset 28 Number of FVI elements included. +/// +/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer +/// +} FIRMWARE_VERSION_INFO_HOB; +#pragma pack() + +#endif // _FIRMWARE_VERSION_INFO_HOB_H_ diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspUpd.h new file mode 100644 index 0000000000..b28ba78ea0 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspUpd.h @@ -0,0 +1,48 @@ +/** @file + +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include <FspEas.h> + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F4450554C534A /* 'JSLUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F4450554C534A /* 'JSLUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F4450554C534A /* 'JSLUPD_S' */ + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h new file mode 100644 index 0000000000..cce959cb15 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspmUpd.h @@ -0,0 +1,637 @@ +/** @file + +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +#include <MemInfoHob.h> + +/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + + +/** Fsp M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Reserved +**/ + UINT8 Reserved0[8]; + +/** Offset 0x0048 - SPD Data Length + Length of SPD Data + 0x100:256 Bytes, 0x200:512 Bytes +**/ + UINT16 MemorySpdDataLen; + +/** Offset 0x004A - Reserved +**/ + UINT8 Reserved1[2]; + +/** Offset 0x004C - Memory SPD Pointer Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr00; + +/** Offset 0x0050 - Reserved +**/ + UINT8 Reserved2[4]; + +/** Offset 0x0054 - Memory SPD Pointer Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr10; + +/** Offset 0x0058 - Reserved +**/ + UINT8 Reserved3[4]; + +/** Offset 0x005C - Dq Byte Map CH0 + Dq byte mapping between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqByteMapCh0[12]; + +/** Offset 0x0068 - Dq Byte Map CH1 + Dq byte mapping between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqByteMapCh1[12]; + +/** Offset 0x0074 - Dqs Map CPU to DRAM CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqsMapCpu2DramCh0[8]; + +/** Offset 0x007C - Dqs Map CPU to DRAM CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqsMapCpu2DramCh1[8]; + +/** Offset 0x0084 - RcompResister settings + Indicates RcompReister settings: Board-dependent +**/ + UINT16 RcompResistor[3]; + +/** Offset 0x008A - RcompTarget settings + RcompTarget settings: board-dependent +**/ + UINT16 RcompTarget[5]; + +/** Offset 0x0094 - Dqs Pins Interleaved Setting + Indicates DqPinsInterleaved setting: board-dependent + $EN_DIS +**/ + UINT8 DqPinsInterleaved; + +/** Offset 0x0095 - VREF_CA + CA Vref routing: board-dependent + 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B, + 2:VREF_CA to CH_A and VREF_DQ_B to CH_B +**/ + UINT8 CaVrefConfig; + +/** Offset 0x0096 - Reserved +**/ + UINT8 Reserved4[6]; + +/** Offset 0x009C - Intel Enhanced Debug + Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied + 0 : Disable, 0x400000 : Enable +**/ + UINT32 IedSize; + +/** Offset 0x00A0 - Tseg Size + Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build + 0x0400000:4MB, 0x01000000:16MB +**/ + UINT32 TsegSize; + +/** Offset 0x00A4 - Reserved +**/ + UINT8 Reserved5[6]; + +/** Offset 0x00AA - Enable SMBus + Enable/disable SMBus controller. + $EN_DIS +**/ + UINT8 SmbusEnable; + +/** Offset 0x00AB - Spd Address Tabl + Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used + if SPD Address is 00 +**/ + UINT8 SpdAddressTable[4]; + +/** Offset 0x00AF - Platform Debug Consent + To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. + Enabling this BIOS option may alter the default value of other debug-related BIOS + options.\Manual: Do not use Platform Debug Consent to override other debug-relevant + policies, but the user must set each debug option manually, aimed at advanced users.\n + Note: DCI OOB (aka BSSB) uses CCA probe. + 0:Disabled, 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), 4:Enabled (XDP/MIPI60), 5:Enabled + (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual +**/ + UINT8 PlatformDebugConsent; + +/** Offset 0x00B0 - Reserved +**/ + UINT8 Reserved6[2]; + +/** Offset 0x00B2 - Enable DCI ModPHY Pwoer Gate + Enable ModPHY Pwoer Gate when DCI is enabled + $EN_DIS +**/ + UINT8 DciModphyPg; + +/** Offset 0x00B3 - Reserved +**/ + UINT8 Reserved7; + +/** Offset 0x00B4 - PCH Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode +**/ + UINT8 PchTraceHubMode; + +/** Offset 0x00B5 - Reserved +**/ + UINT8 Reserved8[47]; + +/** Offset 0x00E4 - Disable VT-d + 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) + $EN_DIS +**/ + UINT8 VtdDisable; + +/** Offset 0x00E5 - Reserved +**/ + UINT8 Reserved9[3]; + +/** Offset 0x00E8 - Internal Graphics Pre-allocated Memory + Size of memory preallocated for internal graphics. + 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB, + 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, + 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB +**/ + UINT8 IgdDvmt50PreAlloc; + +/** Offset 0x00E9 - Internal Graphics + Enable/disable internal graphics. + $EN_DIS +**/ + UINT8 InternalGfx; + +/** Offset 0x00EA - Reserved +**/ + UINT8 Reserved10; + +/** Offset 0x00EB - Board Type + MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile + Halo, 7=UP Server + 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server +**/ + UINT8 UserBd; + +/** Offset 0x00EC - Reserved +**/ + UINT8 Reserved11[2]; + +/** Offset 0x00EE - SA GV + System Agent dynamic frequency support and when enabled memory will be training + at three different frequencies. + 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled +**/ + UINT8 SaGv; + +/** Offset 0x00EF - Reserved +**/ + UINT8 Reserved12[5]; + +/** Offset 0x00F4 - Rank Margin Tool + Enable/disable Rank Margin Tool. + $EN_DIS +**/ + UINT8 RMT; + +/** Offset 0x00F5 - Reserved +**/ + UINT8 Reserved13[24]; + +/** Offset 0x010D - Memory Reference Clock + 100MHz, 133MHz. + 0:133MHz, 1:100MHz +**/ + UINT8 RefClk; + +/** Offset 0x010E - Reserved +**/ + UINT8 Reserved14[26]; + +/** Offset 0x0128 - Enable Intel HD Audio (Azalia) + 0: Disable, 1: Enable (Default) Azalia controller + $EN_DIS +**/ + UINT8 PchHdaEnable; + +/** Offset 0x0129 - CPU Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode +**/ + UINT8 CpuTraceHubMode; + +/** Offset 0x012A - Reserved +**/ + UINT8 Reserved15[98]; + +/** Offset 0x018C - Program GPIOs for LFP on DDI port-A device + 0=Disabled,1(Default)=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortAConfig; + +/** Offset 0x018D - Reserved +**/ + UINT8 Reserved16[2]; + +/** Offset 0x018F - Enable or disable HPD of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBHpd; + +/** Offset 0x0190 - Enable or disable HPD of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCHpd; + +/** Offset 0x0191 - Reserved +**/ + UINT8 Reserved17[5]; + +/** Offset 0x0196 - Enable or disable DDC of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBDdc; + +/** Offset 0x0197 - Enable or disable DDC of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCDdc; + +/** Offset 0x0198 - Reserved +**/ + UINT8 Reserved18[165]; + +/** Offset 0x023D - C6DRAM power gating feature + This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM + power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating + feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>. + $EN_DIS +**/ + UINT8 EnableC6Dram; + +/** Offset 0x023E - Reserved +**/ + UINT8 Reserved19[7]; + +/** Offset 0x0245 - CPU ratio value + CPU ratio value. Valid Range 0 to 63 +**/ + UINT8 CpuRatio; + +/** Offset 0x0246 - Reserved +**/ + UINT8 Reserved20[4]; + +/** Offset 0x024A - Enable or Disable VMX + Enable or Disable VMX; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x024B - Reserved +**/ + UINT8 Reserved21[31]; + +/** Offset 0x026A - BiosGuard + Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable + $EN_DIS +**/ + UINT8 BiosGuard; + +/** Offset 0x026B - Reserved +**/ + UINT8 Reserved22[5]; + +/** Offset 0x0270 - PrmrrSize + Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable +**/ + UINT32 PrmrrSize; + +/** Offset 0x0274 - SinitMemorySize + Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +**/ + UINT32 SinitMemorySize; + +/** Offset 0x0278 - Reserved +**/ + UINT8 Reserved23[543]; + +/** Offset 0x0497 - Usage type for ClkSrc + 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use + (free running), 0xFF: not used +**/ + UINT8 PcieClkSrcUsage[16]; + +/** Offset 0x04A7 - ClkReq-to-ClkSrc mapping + Number of ClkReq signal assigned to ClkSrc +**/ + UINT8 PcieClkSrcClkReq[16]; + +/** Offset 0x04B7 - Reserved +**/ + UINT8 Reserved24[5]; + +/** Offset 0x04BC - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpEnableMask; + +/** Offset 0x04C0 - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x04C1 - Serial Io Uart Debug Controller Number + Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT + Core interface, it cannot be used for debug purpose. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 SerialIoUartDebugControllerNumber; + +/** Offset 0x04C2 - Reserved +**/ + UINT8 Reserved25[22]; + +/** Offset 0x04D8 - Early Command Training + Enables/Disable Early Command Training + $EN_DIS +**/ + UINT8 ECT; + +/** Offset 0x04D9 - Reserved +**/ + UINT8 Reserved26[2]; + +/** Offset 0x04DB - Read MPR Training + Enables/Disable Read MPR Training + $EN_DIS +**/ + UINT8 RDMPRT; + +/** Offset 0x04DC - Reserved +**/ + UINT8 Reserved27[7]; + +/** Offset 0x04E3 - Dimm ODT Training + Enables/Disable Dimm ODT Training + $EN_DIS +**/ + UINT8 DIMMODTT; + +/** Offset 0x04E4 - DIMM RON Training + Enables/Disable DIMM RON Training + $EN_DIS +**/ + UINT8 DIMMRONT; + +/** Offset 0x04E5 - Reserved +**/ + UINT8 Reserved28; + +/** Offset 0x04E6 - Write Slew Rate Training + Enables/Disable Write Slew Rate Training + $EN_DIS +**/ + UINT8 WRSRT; + +/** Offset 0x04E7 - Read ODT Training + Enables/Disable Read ODT Training + $EN_DIS +**/ + UINT8 RDODTT; + +/** Offset 0x04E8 - Read Equalization Training + Enables/Disable Read Equalization Training + $EN_DIS +**/ + UINT8 RDEQT; + +/** Offset 0x04E9 - Read Amplifier Training + Enables/Disable Read Amplifier Training + $EN_DIS +**/ + UINT8 RDAPT; + +/** Offset 0x04EA - Reserved +**/ + UINT8 Reserved29[3]; + +/** Offset 0x04ED - Read Voltage Centering 2D + Enables/Disable Read Voltage Centering 2D + $EN_DIS +**/ + UINT8 RDVC2D; + +/** Offset 0x04EE - Reserved +**/ + UINT8 Reserved30[3]; + +/** Offset 0x04F1 - Turn Around Timing Training + Enables/Disable Turn Around Timing Training + $EN_DIS +**/ + UINT8 TAT; + +/** Offset 0x04F2 - Reserved +**/ + UINT8 Reserved31[6]; + +/** Offset 0x04F8 - Receive Enable Centering 1D + Enables/Disable Receive Enable Centering 1D + $EN_DIS +**/ + UINT8 RCVENC1D; + +/** Offset 0x04F9 - Retrain Margin Check + Enables/Disable Retrain Margin Check + $EN_DIS +**/ + UINT8 RMC; + +/** Offset 0x04FA - Reserved +**/ + UINT8 Reserved32[60]; + +/** Offset 0x0536 - RAPL PL 1 WindowX + Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindX; + +/** Offset 0x0537 - RAPL PL 1 WindowY + Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindY; + +/** Offset 0x0538 - Reserved +**/ + UINT8 Reserved33[2]; + +/** Offset 0x053A - RAPL PL 1 Power + range[0;2^14-1]= [2047.875;0]in W, (224= Def) +**/ + UINT16 RaplLim1Pwr; + +/** Offset 0x053C - Reserved +**/ + UINT8 Reserved34[68]; + +/** Offset 0x0580 - LpDdrDqDqsReTraining + Enables/Disable LpDdrDqDqsReTraining + $EN_DIS +**/ + UINT8 LpDdrDqDqsReTraining; + +/** Offset 0x0581 - Reserved +**/ + UINT8 Reserved35[172]; + +/** Offset 0x062D - Enable HD Audio Link + Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkHdaEnable; + +/** Offset 0x062E - Reserved +**/ + UINT8 Reserved36[3]; + +/** Offset 0x0631 - Enable HD Audio DMIC_N Link + Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. +**/ + UINT8 PchHdaAudioLinkDmicEnable[2]; + +/** Offset 0x0633 - Reserved +**/ + UINT8 Reserved37[17]; + +/** Offset 0x0644 - Enable HD Audio DSP + Enable/disable HD Audio DSP feature. + $EN_DIS +**/ + UINT8 PchHdaDspEnable; + +/** Offset 0x0645 - Reserved +**/ + UINT8 Reserved38[11]; + +/** Offset 0x0650 - Enable HD Audio SSP0 Link + Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 +**/ + UINT8 PchHdaAudioLinkSspEnable[6]; + +/** Offset 0x0656 - Enable HD Audio SoundWire#N Link + Enable/disable HD Audio SNDW#N link. Muxed with HDA. +**/ + UINT8 PchHdaAudioLinkSndwEnable[4]; + +/** Offset 0x065A - Reserved +**/ + UINT8 Reserved39[7]; + +/** Offset 0x0661 - Skip MBP HOB + Test, 0: disable, 1: enable, Enable/Disable MOB HOB. + $EN_DIS +**/ + UINT8 SkipMbpHob; + +/** Offset 0x0662 - Reserved +**/ + UINT8 Reserved40[22]; +} FSP_M_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPM_ARCH_UPD FspmArchUpd; + +/** Offset 0x0040 +**/ + FSP_M_CONFIG FspmConfig; + +/** Offset 0x0678 +**/ + UINT8 UnusedUpdSpace19[6]; + +/** Offset 0x067E +**/ + UINT16 UpdTerminator; +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h new file mode 100644 index 0000000000..d01ae6ab46 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FspsUpd.h @@ -0,0 +1,656 @@ +/** @file + +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/// +/// Azalia Header structure +/// +typedef struct { + UINT16 VendorId; ///< Codec Vendor ID + UINT16 DeviceId; ///< Codec Device ID + UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. + UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. + UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. + UINT32 Reserved; ///< Reserved for future use. Must be set to 0. +} AZALIA_HEADER; + +/// +/// Audio Azalia Verb Table structure +/// +typedef struct { + AZALIA_HEADER Header; ///< AZALIA PCH header + UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header +} AUDIO_AZALIA_VERB_TABLE; + +/// +/// Refer to the definition of PCH_INT_PIN +/// +typedef enum { + SiPchNoInt, ///< No Interrupt Pin + SiPchIntA, + SiPchIntB, + SiPchIntC, + SiPchIntD +} SI_PCH_INT_PIN; +/// +/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. +/// +typedef struct { + UINT8 Device; ///< Device number + UINT8 Function; ///< Device function + UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) + UINT8 Irq; ///< IRQ to be set for device. +} SI_PCH_DEVICE_INTERRUPT_CONFIG; + +#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices + + +/** Fsp S Configuration +**/ +typedef struct { + +/** Offset 0x0020 - Reserved +**/ + UINT8 Reserved0[16]; + +/** Offset 0x0030 - Graphics Configuration Ptr + Points to VBT +**/ + UINT32 GraphicsConfigPtr; + +/** Offset 0x0034 - Enable Device 4 + Enable/disable Device 4 + $EN_DIS +**/ + UINT8 Device4Enable; + +/** Offset 0x0035 - Enable eMMC Controller + Enable/disable eMMC Controller. + $EN_DIS +**/ + UINT8 ScsEmmcEnabled; + +/** Offset 0x0036 - Enable eMMC HS400 Mode + Enable eMMC HS400 Mode. + $EN_DIS +**/ + UINT8 ScsEmmcHs400Enabled; + +/** Offset 0x0037 - Use DLL values from policy + Set if FSP should use HS400 DLL values from policy + $EN_DIS +**/ + UINT8 EmmcUseCustomDlls; + +/** Offset 0x0038 - Emmc Tx CMD Delay control register value + Please see Tx CMD Delay Control register definition for help +**/ + UINT32 EmmcTxCmdDelayRegValue; + +/** Offset 0x003C - Emmc Tx DATA Delay control 1 register value + Please see Tx DATA Delay control 1 register definition for help +**/ + UINT32 EmmcTxDataDelay1RegValue; + +/** Offset 0x0040 - Emmc Tx DATA Delay control 2 register value + Please see Tx DATA Delay control 2 register definition for help +**/ + UINT32 EmmcTxDataDelay2RegValue; + +/** Offset 0x0044 - Emmc Rx CMD + DATA Delay control 1 register value + Please see Rx CMD + DATA Delay control 1 register definition for help +**/ + UINT32 EmmcRxCmdDataDelay1RegValue; + +/** Offset 0x0048 - Emmc Rx CMD + DATA Delay control 2 register value + Please see Rx CMD + DATA Delay control 2 register definition for help +**/ + UINT32 EmmcRxCmdDataDelay2RegValue; + +/** Offset 0x004C - Emmc Rx Strobe Delay control register value + Please see Rx Strobe Delay control register definition for help +**/ + UINT32 EmmcRxStrobeDelayRegValue; + +/** Offset 0x0050 - Enable SdCard Controller + Enable/disable SD Card Controller. + $EN_DIS +**/ + UINT8 ScsSdCardEnabled; + +/** Offset 0x0051 - SdCard power enable polarity + Choose SD_PWREN# polarity + 0: Active low, 1: Active high +**/ + UINT8 SdCardPowerEnableActiveHigh; + +/** Offset 0x0052 - Reserved +**/ + UINT8 Reserved1[34]; + +/** Offset 0x0074 - SdCard Command Pad Termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up +**/ + UINT8 SdCardGpioCmdPadTermination; + +/** Offset 0x0075 - Reserved +**/ + UINT8 Reserved2[136]; + +/** Offset 0x00FD - Enable SATA SALP Support + Enable/disable SATA Aggressive Link Power Management. + $EN_DIS +**/ + UINT8 SataSalpSupport; + +/** Offset 0x00FE - Enable SATA ports + Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, + and so on. +**/ + UINT8 SataPortsEnable[8]; + +/** Offset 0x0106 - Enable SATA DEVSLP Feature + Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each + port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlp[8]; + +/** Offset 0x010E - Enable USB2 ports + Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb20Enable[16]; + +/** Offset 0x011E - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb30Enable[10]; + +/** Offset 0x0128 - Enable xDCI controller + Enable/disable to xDCI controller. + $EN_DIS +**/ + UINT8 XdciEnable; + +/** Offset 0x0129 - Reserved +**/ + UINT8 Reserved3[28]; + +/** Offset 0x0145 - Enable SATA + Enable/disable SATA controller. + $EN_DIS +**/ + UINT8 SataEnable; + +/** Offset 0x0146 - SATA Mode + Select SATA controller working mode. + 0:AHCI, 1:RAID +**/ + UINT8 SataMode; + +/** Offset 0x0147 - SPIn Device Mode + Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available + modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden +**/ + UINT8 SerialIoSpiMode[7]; + +/** Offset 0x014E - SPI<N> Chip Select Polarity + Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow, + 1:SerialIoSpiCsActiveHigh +**/ + UINT8 SerialIoSpiCsPolarity[14]; + +/** Offset 0x015C - Reserved +**/ + UINT8 Reserved4[21]; + +/** Offset 0x0171 - SPIn Default Chip Select Mode HW/SW + Sets Default CS Mode Hardware or Software. N represents controller index: SPI0, + SPI1, ... Available options: 0:HW, 1:SW +**/ + UINT8 SerialIoSpiCsMode[7]; + +/** Offset 0x0178 - SPIn Default Chip Select State Low/High + Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ... + Available options: 0:Low, 1:High +**/ + UINT8 SerialIoSpiCsState[7]; + +/** Offset 0x017F - UARTn Device Mode + Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available + modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartMode[7]; + +/** Offset 0x0186 - Reserved +**/ + UINT8 Reserved5[186]; + +/** Offset 0x0240 - UART Number For Debug Purpose + UART number for debug purpose. 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, + 6:UART6. Note: If UART0 is selected as CNVi BT Core interface, it cannot be used + for debug purpose. + 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, 6:UART6 +**/ + UINT8 SerialIoDebugUartNumber; + +/** Offset 0x0241 - Reserved +**/ + UINT8 Reserved6[7]; + +/** Offset 0x0248 - I2Cn Device Mode + Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available + modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden +**/ + UINT8 SerialIoI2cMode[8]; + +/** Offset 0x0250 - Reserved +**/ + UINT8 Reserved7[72]; + +/** Offset 0x0298 - USB Per Port HS Preemphasis Bias + USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. +**/ + UINT8 Usb2PhyPetxiset[16]; + +/** Offset 0x02A8 - USB Per Port HS Transmitter Bias + USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. +**/ + UINT8 Usb2PhyTxiset[16]; + +/** Offset 0x02B8 - USB Per Port HS Transmitter Emphasis + USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, + 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. +**/ + UINT8 Usb2PhyPredeemp[16]; + +/** Offset 0x02C8 - USB Per Port Half Bit Pre-emphasis + USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. + One byte for each port. +**/ + UINT8 Usb2PhyPehalfbit[16]; + +/** Offset 0x02D8 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment + Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmphEnable[10]; + +/** Offset 0x02E2 - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting + USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], + <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmph[10]; + +/** Offset 0x02EC - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment + Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmpEnable[10]; + +/** Offset 0x02F6 - USB 3.0 TX Output Downscale Amplitude Adjustment + USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default + = 00h</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmp[10]; + +/** Offset 0x0300 - Enable LAN + Enable/disable LAN controller. + $EN_DIS +**/ + UINT8 PchLanEnable; + +/** Offset 0x0301 - Reserved +**/ + UINT8 Reserved8[83]; + +/** Offset 0x0354 - External V1P05 Voltage Value that will be used in S0i2/S0i3 states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtV1p05RailVoltage; + +/** Offset 0x0356 - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtV1p05RailIccMax; + +/** Offset 0x0357 - Reserved +**/ + UINT8 Reserved9; + +/** Offset 0x0358 - External Vnn Voltage Value that will be used in S0ix/Sx states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtVnnRailVoltage; + +/** Offset 0x035A - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailIccMax; + +/** Offset 0x035B - Reserved +**/ + UINT8 Reserved10; + +/** Offset 0x035C - External Vnn Voltage Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments + (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtVnnRailSxVoltage; + +/** Offset 0x035E - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailSxIccMax; + +/** Offset 0x035F - Reserved +**/ + UINT8 Reserved11[3]; + +/** Offset 0x0362 - Transition time in microseconds from Off (0V) to High Current Mode Voltage + This field has 1us resolution. When value is 0 Transition to 0V is disabled. +**/ + UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime; + +/** Offset 0x0364 - Reserved +**/ + UINT8 Reserved12[22]; + +/** Offset 0x037A - CNVi BT Audio Offload + Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtAudioOffload; + +/** Offset 0x037B - Reserved +**/ + UINT8 Reserved13; + +/** Offset 0x037C - CNVi RF_RESET pin muxing + Select CNVi RF_RESET# pin depending on board routing. ICP-N: GPP_H12 = 0x2746E40C(default) + or GPP_H1 = 0x3746E401. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h. +**/ + UINT32 CnviRfResetPinMux; + +/** Offset 0x0380 - CNVi CLKREQ pin muxing + Select CNVi CLKREQ pin depending on board routing. ICP-N: GPP_H13 = 0x2746E60D(default) + or GPP_H2 = 0x3746E602. Refer to GPIO_*_MUXING_CNVI_MODEM_CLKREQ_* in GpioPins*.h. +**/ + UINT32 CnviClkreqPinMux; + +/** Offset 0x0384 - Reserved +**/ + UINT8 Reserved14[6]; + +/** Offset 0x038A - HECI3 state + The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed. + 0: disable, 1: enable + $EN_DIS +**/ + UINT8 Heci3Enabled; + +/** Offset 0x038B - Reserved +**/ + UINT8 Reserved15[141]; + +/** Offset 0x0418 - CdClock Frequency selection + 0: (Default) Auto (Max based on reference clock frequency), 1: 172.8 Mhz, 2: 180 + Mhz, 3: 190 Mhz, 4: 307.2 Mhz, 5: 312 Mhz, 6: 552 Mhz, 7: 556.8 Mhz, 8: 648 Mhz, + 9: 652.8 Mhz + 0: Auto (Max based on reference clock frequency), 1: 172.8 Mhz, 2: 180 Mhz, 3: 190 + Mhz, 4: 307.2 Mhz, 5: 312 Mhz, 6: 552 Mhz, 7: 556.8 Mhz, 8: 648 Mhz, 9: 652.8 Mhz +**/ + UINT8 CdClock; + +/** Offset 0x0419 - Enable/Disable PeiGraphicsPeimInit + Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit + $EN_DIS +**/ + UINT8 PeiGraphicsPeimInit; + +/** Offset 0x041A - Reserved +**/ + UINT8 Reserved16[160]; + +/** Offset 0x04BA - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. </b>0: Initialize; <b>1: Skip + $EN_DIS +**/ + UINT8 SkipMpInit; + +/** Offset 0x04BB - Reserved +**/ + UINT8 Reserved17[9]; + +/** Offset 0x04C4 - CpuMpPpi + Pointer for CpuMpPpi +**/ + UINT32 CpuMpPpi; + +/** Offset 0x04C8 - Reserved +**/ + UINT8 Reserved18[86]; + +/** Offset 0x051E - RTC Cmos Memory Lock + Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper + and and lower 128-byte bank of RTC RAM. + $EN_DIS +**/ + UINT8 RtcMemoryLock; + +/** Offset 0x051F - Reserved +**/ + UINT8 Reserved19[24]; + +/** Offset 0x0537 - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 PcieRpPmSci[24]; + +/** Offset 0x054F - Reserved +**/ + UINT8 Reserved20[24]; + +/** Offset 0x0567 - Enable PCIE RP Clk Req Detect + Probe CLKREQ# signal before enabling CLKREQ# based power management. +**/ + UINT8 PcieRpClkReqDetect[24]; + +/** Offset 0x057F - Reserved +**/ + UINT8 Reserved21[455]; + +/** Offset 0x0746 - PCH Pm Slp S3 Min Assert + SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. +**/ + UINT8 PchPmSlpS3MinAssert; + +/** Offset 0x0747 - Reserved +**/ + UINT8 Reserved22; + +/** Offset 0x0748 - PCH Pm Slp Sus Min Assert + SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. +**/ + UINT8 PchPmSlpSusMinAssert; + +/** Offset 0x0749 - PCH Pm Slp A Min Assert + SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. +**/ + UINT8 PchPmSlpAMinAssert; + +/** Offset 0x074A - Reserved +**/ + UINT8 Reserved23[11]; + +/** Offset 0x0755 - PCH Sata Pwr Opt Enable + SATA Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 SataPwrOptEnable; + +/** Offset 0x0756 - Reserved +**/ + UINT8 Reserved24[146]; + +/** Offset 0x07E8 - USB2 Port Over Current Pin + Describe the specific over current pin number of USB 2.0 Port N. +**/ + UINT8 Usb2OverCurrentPin[16]; + +/** Offset 0x07F8 - USB3 Port Over Current Pin + Describe the specific over current pin number of USB 3.0 Port N. +**/ + UINT8 Usb3OverCurrentPin[10]; + +/** Offset 0x0802 - Enable 8254 Static Clock Gating + Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time + might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support + legacy OS using 8254 timer. Also enable this while S0ix is enabled. + $EN_DIS +**/ + UINT8 Enable8254ClockGating; + +/** Offset 0x0803 - Enable 8254 Static Clock Gating On S3 + This is only applicable when Enable8254ClockGating is disabled. FSP will do the + 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This + avoids the SMI requirement for the programming. + $EN_DIS +**/ + UINT8 Enable8254ClockGatingOnS3; + +/** Offset 0x0804 - Reserved +**/ + UINT8 Reserved25[531]; + +/** Offset 0x0A17 - Enable/Disable IGFX PmSupport + Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport + $EN_DIS +**/ + UINT8 PmSupport; + +/** Offset 0x0A18 - Reserved +**/ + UINT8 Reserved26[32]; + +/** Offset 0x0A38 - TCC Activation Offset + TCC Activation Offset. Offset from factory set TCC activation temperature at which + the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation + Temperature, in volts.For SKL Y SKU, the recommended default for this policy is + <b>10</b>, For all other SKUs the recommended default are <b>0</b> +**/ + UINT8 TccActivationOffset; + +/** Offset 0x0A39 - Reserved +**/ + UINT8 Reserved27[34]; + +/** Offset 0x0A5B - Enable or Disable CPU power states (C-states) + Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 Cx; + +/** Offset 0x0A5C - Reserved +**/ + UINT8 Reserved28[74]; + +/** Offset 0x0AA6 - Platform Power Pmax + PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments. + Range 0-1024 Watts. Value of 800 = 100W +**/ + UINT16 PsysPmax; + +/** Offset 0x0AA8 - Reserved +**/ + UINT8 Reserved29[116]; + +/** Offset 0x0B1C - End of Post message + Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): + EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE + 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x0B1D - Reserved +**/ + UINT8 Reserved30[3]; + +/** Offset 0x0B20 - Unlock all GPIO pads + Force all GPIO pads to be unlocked for debug purpose. + $EN_DIS +**/ + UINT8 PchUnlockGpioPads; + +/** Offset 0x0B21 - Reserved +**/ + UINT8 Reserved31[447]; +} FSP_S_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSP_S_CONFIG FspsConfig; + +/** Offset 0x0CE0 +**/ + UINT8 UnusedUpdSpace37[6]; + +/** Offset 0x0CE6 +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FsptUpd.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FsptUpd.h new file mode 100644 index 0000000000..508705c13f --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/FsptUpd.h @@ -0,0 +1,186 @@ +/** @file + +Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPTUPD_H__ +#define __FSPTUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/** Fsp T Core UPD +**/ +typedef struct { + +/** Offset 0x0020 +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x0024 +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x0028 +**/ + UINT32 CodeRegionBase; + +/** Offset 0x002C +**/ + UINT32 CodeRegionSize; + +/** Offset 0x0030 +**/ + UINT8 Reserved[16]; +} FSPT_CORE_UPD; + +/** Fsp T Configuration +**/ +typedef struct { + +/** Offset 0x0040 - PcdSerialIoUartDebugEnable + Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP. + 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing +**/ + UINT8 PcdSerialIoUartDebugEnable; + +/** Offset 0x0041 - PcdSerialIoUartNumber - FSPT + Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT + Core interface, it cannot be used for debug purpose. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIoUartNumber; + +/** Offset 0x0042 - PcdSerialIoUartMode - FSPT + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 PcdSerialIoUartMode; + +/** Offset 0x0043 +**/ + UINT8 UnusedUpdSpace0; + +/** Offset 0x0044 - PcdSerialIoUartBaudRate - FSPT + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 PcdSerialIoUartBaudRate; + +/** Offset 0x0048 - Pci Express Base Address + Base address to be programmed for Pci Express +**/ + UINT64 PcdPciExpressBaseAddress; + +/** Offset 0x0050 - Pci Express Region Length + Region Length to be programmed for Pci Express +**/ + UINT32 PcdPciExpressRegionLength; + +/** Offset 0x0054 - PcdSerialIoUartParity - FSPT + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 PcdSerialIoUartParity; + +/** Offset 0x0055 - PcdSerialIoUartDataBits - FSPT + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 PcdSerialIoUartDataBits; + +/** Offset 0x0056 - PcdSerialIoUartStopBits - FSPT + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 PcdSerialIoUartStopBits; + +/** Offset 0x0057 - PcdSerialIoUartAutoFlow - FSPT + Enables UART hardware flow control, CTS and RTS lines. + 0: Disable, 1:Enable +**/ + UINT8 PcdSerialIoUartAutoFlow; + +/** Offset 0x0058 - PcdSerialIoUartRxPinMux - FSPT + Select RX pin muxing for SerialIo UART used for debug +**/ + UINT32 PcdSerialIoUartRxPinMux; + +/** Offset 0x005C - PcdSerialIoUartTxPinMux - FSPT + Select TX pin muxing for SerialIo UART used for debug +**/ + UINT32 PcdSerialIoUartTxPinMux; + +/** Offset 0x0060 - PcdSerialIoUartRtsPinMux - FSPT + Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 PcdSerialIoUartRtsPinMux; + +/** Offset 0x0064 - PcdSerialIoUartCtsPinMux - FSPT + Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 PcdSerialIoUartCtsPinMux; + +/** Offset 0x0068 +**/ + UINT8 ReservedFsptUpd1[24]; +} FSP_T_CONFIG; + +/** Fsp T UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPT_CORE_UPD FsptCoreUpd; + +/** Offset 0x0040 +**/ + FSP_T_CONFIG FsptConfig; + +/** Offset 0x0080 +**/ + UINT8 UnusedUpdSpace1[6]; + +/** Offset 0x0086 +**/ + UINT16 UpdTerminator; +} FSPT_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/jasperlake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/MemInfoHob.h new file mode 100644 index 0000000000..c590409f02 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/jasperlake/MemInfoHob.h @@ -0,0 +1,274 @@ +/** @file + This file contains definitions required for creation of + Memory S3 Save data, Memory Info data and Memory Platform + data hobs. + + @copyright + Copyright (c) 2019, Intel Corporation. All rights reserved.<BR> + This program and the accompanying materials are licensed and made available under + the terms and conditions of the BSD License that accompanies this distribution. + The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php. + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +@par Specification Reference: +**/ +#ifndef _MEM_INFO_HOB_H_ +#define _MEM_INFO_HOB_H_ + +#include <Uefi/UefiMultiPhase.h> +#include <Pi/PiBootMode.h> +#include <Pi/PiHob.h> + +#pragma pack (push, 1) + +extern EFI_GUID gSiMemoryS3DataGuid; +extern EFI_GUID gSiMemoryInfoDataGuid; +extern EFI_GUID gSiMemoryPlatformDataGuid; + +#define MAX_NODE 1 +#define MAX_CH 2 +#define MAX_DIMM 2 + +/// +/// Host reset states from MRC. +/// +#define WARM_BOOT 2 + +#define R_MC_CHNL_RANK_PRESENT 0x7C +#define B_RANK0_PRS BIT0 +#define B_RANK1_PRS BIT1 +#define B_RANK2_PRS BIT4 +#define B_RANK3_PRS BIT5 + +/// +/// Defines taken from MRC so avoid having to include MrcInterface.h +/// + +// +// Matches MAX_SPD_SAVE define in MRC +// +#ifndef MAX_SPD_SAVE +#define MAX_SPD_SAVE 29 +#endif + +// +// MRC version description. +// +typedef struct { + UINT8 Major; ///< Major version number + UINT8 Minor; ///< Minor version number + UINT8 Rev; ///< Revision number + UINT8 Build; ///< Build number +} SiMrcVersion; + +// +// Matches MrcChannelSts enum in MRC +// +#ifndef CHANNEL_NOT_PRESENT +#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller. +#endif +#ifndef CHANNEL_DISABLED +#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled. +#endif +#ifndef CHANNEL_PRESENT +#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled. +#endif + +// +// Matches MrcDimmSts enum in MRC +// +#ifndef DIMM_ENABLED +#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected. +#endif +#ifndef DIMM_DISABLED +#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence. +#endif +#ifndef DIMM_PRESENT +#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used. +#endif +#ifndef DIMM_NOT_PRESENT +#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair. +#endif + +// +// Matches MrcBootMode enum in MRC +// +#ifndef bmCold +#define bmCold 0 // Cold boot +#endif +#ifndef bmWarm +#define bmWarm 1 // Warm boot +#endif +#ifndef bmS3 +#define bmS3 2 // S3 resume +#endif +#ifndef bmFast +#define bmFast 3 // Fast boot +#endif + +// +// Matches MrcDdrType enum in MRC +// +#ifndef MRC_DDR_TYPE_DDR4 +#define MRC_DDR_TYPE_DDR4 0 +#endif +#ifndef MRC_DDR_TYPE_DDR3 +#define MRC_DDR_TYPE_DDR3 1 +#endif +#ifndef MRC_DDR_TYPE_LPDDR3 +#define MRC_DDR_TYPE_LPDDR3 2 +#endif +#ifndef CPU_CFL//CNL +#ifndef MRC_DDR_TYPE_LPDDR4 +#define MRC_DDR_TYPE_LPDDR4 3 +#endif +#else//CFL +#ifndef MRC_DDR_TYPE_UNKNOWN +#define MRC_DDR_TYPE_UNKNOWN 3 +#endif +#endif//CPU_CFL-endif + +#define MAX_PROFILE_NUM 4 // number of memory profiles supported +#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported + +// +// DIMM timings +// +typedef struct { + UINT32 tCK; ///< Memory cycle time, in femtoseconds. + UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. + UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. + UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. + UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. + UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. + UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. + UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. + UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time. + UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. + UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. + UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. + UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. + UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. + UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. + UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. + UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. + UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. + UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group. +} MRC_CH_TIMING; + +typedef struct { + UINT8 SG; ///< Number of tCK cycles between transactions in the same bank group. + UINT8 DG; ///< Number of tCK cycles between transactions when switching bank groups. + UINT8 DR; ///< Number of tCK cycles between transactions when switching between Ranks (in the same DIMM). + UINT8 DD; ///< Number of tCK cycles between transactions when switching between DIMMs. +} MRC_TA_TIMING; + +/// +/// Memory SMBIOS & OC Memory Data Hob +/// +typedef struct { + UINT8 Status; ///< See MrcDimmStatus for the definition of this field. + UINT8 DimmId; + UINT32 DimmCapacity; ///< DIMM size in MBytes. + UINT16 MfgId; + UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes + UINT8 RankInDimm; ///< The number of ranks in this DIMM. + UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. + UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. + UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. + UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. + UINT16 Speed; ///< The maximum capable speed of the device, in MHz. +} DIMM_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this channel should be used. + UINT8 ChannelId; + UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. + MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. + DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. + MRC_TA_TIMING tRd2Rd; ///< Read-to-Read Turn Around Timings + MRC_TA_TIMING tRd2Wr; ///< Read-to-Write Turn Around Timings + MRC_TA_TIMING tWr2Rd; ///< Write-to-Read Turn Around Timings + MRC_TA_TIMING tWr2Wr; ///< Write-to-Write Turn Around Timings +} CHANNEL_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this controller should be used. + UINT16 DeviceId; ///< The PCI device id of this memory controller. + UINT8 RevisionId; ///< The PCI revision id of this memory controller. + UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. + CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. + MRC_TA_TIMING tRd2Rd; ///< Deprecated and moved to CHANNEL_INFO. Read-to-Read Turn Around Timings + MRC_TA_TIMING tRd2Wr; ///< Deprecated and moved to CHANNEL_INFO. Read-to-Write Turn Around Timings + MRC_TA_TIMING tWr2Rd; ///< Deprecated and moved to CHANNEL_INFO. Write-to-Read Turn Around Timings + MRC_TA_TIMING tWr2Wr; ///< Deprecated and moved to CHANNEL_INFO. Write-to-Write Turn Around Timings +} CONTROLLER_INFO; + +typedef struct { + UINT8 Revision; + UINT16 DataWidth; ///< Data width, in bits, of this memory device + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 + UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) + UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + + SiMrcVersion Version; + BOOLEAN EccSupport; + UINT8 MemoryProfile; + UINT32 TotalPhysicalMemorySize; + UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. + UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. + UINT8 Ratio; + UINT8 RefClk; + UINT32 VddVoltage[MAX_PROFILE_NUM]; + CONTROLLER_INFO Controller[MAX_NODE]; +} MEMORY_INFO_DATA_HOB; + +/** + Memory Platform Data Hob + + <b>Revision 1:</b> + - Initial version. + <b>Revision 2:</b> + - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields +**/ +typedef struct { + UINT8 Revision; + UINT8 Reserved[3]; + UINT32 BootMode; + UINT32 TsegSize; + UINT32 TsegBase; + UINT32 PrmrrSize; + UINT32 PrmrrBase; + UINT32 GttBase; + UINT32 MmioSize; + UINT32 PciEBaseAddress; +#ifdef CPU_CFL + UINT32 GdxcIotBase; + UINT32 GdxcIotSize; + UINT32 GdxcMotBase; + UINT32 GdxcMotSize; +#endif //CPU_CFL +} MEMORY_PLATFORM_DATA; + +typedef struct { + EFI_HOB_GUID_TYPE EfiHobGuidType; + MEMORY_PLATFORM_DATA Data; + UINT8 *Buffer; +} MEMORY_PLATFORM_DATA_HOB; + +#pragma pack (pop) + +#endif // _MEM_INFO_HOB_H_ |