diff options
| author | Aamir Bohra <aamir.bohra@intel.com> | 2017-03-31 21:02:16 +0530 |
|---|---|---|
| committer | Martin Roth <martinroth@google.com> | 2017-04-11 17:03:20 +0200 |
| commit | c1f260e49a6af71025c9fee2cea10ee4f48186b2 (patch) | |
| tree | 2651e5f12e8dc42b86667d5ffaa6b5e1f22d08e0 /src | |
| parent | 01d75f4172e73fbcdc08ce0a13eaa0efb400ff12 (diff) | |
soc/intel/skylake: Use intel/common/uart driver
Change-Id: Id132df15ae5a6aef75d6434df18fc71d8d28c3ca
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19003
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Diffstat (limited to 'src')
| -rw-r--r-- | src/soc/intel/skylake/Kconfig | 1 | ||||
| -rw-r--r-- | src/soc/intel/skylake/bootblock/uart.c | 29 |
2 files changed, 6 insertions, 24 deletions
diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig index e597d6238a..3024196f2a 100644 --- a/src/soc/intel/skylake/Kconfig +++ b/src/soc/intel/skylake/Kconfig @@ -55,6 +55,7 @@ config CPU_SPECIFIC_OPTIONS select SOC_INTEL_COMMON_BLOCK_PCR select SOC_INTEL_COMMON_BLOCK_RTC select SOC_INTEL_COMMON_BLOCK_SA + select SOC_INTEL_COMMON_BLOCK_UART select SOC_INTEL_COMMON_BLOCK_XHCI select SOC_INTEL_COMMON_LPSS_I2C select SOC_INTEL_COMMON_NHLT diff --git a/src/soc/intel/skylake/bootblock/uart.c b/src/soc/intel/skylake/bootblock/uart.c index cf06359eae..26b81c0589 100644 --- a/src/soc/intel/skylake/bootblock/uart.c +++ b/src/soc/intel/skylake/bootblock/uart.c @@ -15,16 +15,15 @@ * GNU General Public License for more details. */ -#include <arch/io.h> #include <console/uart.h> #include <device/pci_def.h> +#include <gpio.h> #include <intelblocks/lpss.h> #include <intelblocks/pcr.h> -#include <stdint.h> +#include <intelblocks/uart.h> #include <soc/bootblock.h> #include <soc/pci_devs.h> #include <soc/pcr_ids.h> -#include <gpio.h> /* Serial IO UART controller legacy mode */ #define PCR_SERIAL_IO_GPPRVRW7 0x618 @@ -33,8 +32,8 @@ #define PCR_SIO_PCH_LEGACY_UART2 (1 << 2) /* Clock divider parameters for 115200 baud rate */ -#define CLOCK_DIV_M_VAL 0x30 -#define CLOCK_DIV_N_VAL 0xc35 +#define CLK_M_VAL 0x30 +#define CLK_N_VAL 0xc35 /* UART2 pad configuration. Support RXD and TXD for now. */ static const struct pad_config uart2_pads[] = { @@ -44,27 +43,9 @@ static const struct pad_config uart2_pads[] = { void pch_uart_init(void) { - device_t dev = PCH_DEV_UART2; - u32 tmp; uintptr_t base = uart_platform_base(CONFIG_UART_FOR_CONSOLE); - /* Set configured UART2 base address */ - pci_write_config32(dev, PCI_BASE_ADDRESS_0, (u32)base); - - /* Enable memory access and bus master */ - tmp = pci_read_config32(dev, PCI_COMMAND); - tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; - pci_write_config32(dev, PCI_COMMAND, tmp); - - /* Take UART2 out of reset */ - lpss_reset_release(base); - - /* - * Set M and N divisor inputs and enable clock. - * Main reference frequency to UART is: - * 120MHz * M / N = 120MHz * 48 / 3125 = 1843200Hz - */ - lpss_clk_update(base, CLOCK_DIV_M_VAL, CLOCK_DIV_N_VAL); + uart_common_init(PCH_DEV_UART2, base, CLK_M_VAL, CLK_N_VAL); /* Put UART2 in byte access mode for 16550 compatibility */ if (!IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM_32)) |