soc/amd/picasso: move UART Kconfig options to common folder

The actual UART initialization code will be factored out in follow-up
commits.

Change-Id: Ie4ddf1951b230323c5480c4389376c62dd74b0e1
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>

2 files changed, 58 insertions, 47 deletions

diff --git a/src/soc/amd/common/block/uart/Kconfig b/src/soc/amd/common/block/uart/Kconfig
new file mode 100644
index 0000000000..599594ba5e
--- /dev/null
+++ b/src/soc/amd/common/block/uart/Kconfig
@@ -0,0 +1,57 @@
+config SOC_AMD_COMMON_BLOCK_UART
+	bool
+	default n
+	help
+	  Select this option to add the common functions for setting up the
+	  UART configuration to the build.
+
+if SOC_AMD_COMMON_BLOCK_UART
+
+config AMD_SOC_CONSOLE_UART
+	bool "Use integrated AMD SoC UART controller for console"
+	default n
+	select DRIVERS_UART_8250MEM
+	select DRIVERS_UART_8250MEM_32
+	select NO_UART_ON_SUPERIO
+	select UART_OVERRIDE_REFCLK
+	help
+	  There are four memory-mapped UARTs controllers at:
+	  0: 0xfedc9000
+	  1: 0xfedca000
+	  2: 0xfedc3000
+	  3: 0xfedcf000
+
+choice
+	prompt "UART Frequency"
+	depends on AMD_SOC_CONSOLE_UART
+	default AMD_SOC_UART_48MZ
+
+config AMD_SOC_UART_48MZ
+	bool "48 MHz clock"
+	help
+	  Select this option for the most compatibility.
+
+config AMD_SOC_UART_1_8MZ
+	bool "1.8432 MHz clock"
+	help
+	  Select this option if an old payload or Linux ttyS0 arguments require
+	  a 1.8432 MHz clock source for the UART.
+
+endchoice
+
+config AMD_SOC_UART_LEGACY
+	bool "Decode legacy I/O range"
+	help
+	  Assign I/O 3F8, 2F8, etc. to an integrated AMD SoC UART. A UART
+	  accessed with I/O does not allow all the features of MMIO. The MMIO
+	  decode is still present when this option is used.
+
+config CONSOLE_UART_BASE_ADDRESS
+	depends on CONSOLE_SERIAL && AMD_SOC_CONSOLE_UART
+	hex
+	default 0xfedc9000 if UART_FOR_CONSOLE = 0
+	default 0xfedca000 if UART_FOR_CONSOLE = 1
+	default 0xfedc3000 if UART_FOR_CONSOLE = 2
+	default 0xfedcf000 if UART_FOR_CONSOLE = 3
+
+endif # SOC_AMD_COMMON_BLOCK_UART
diff --git a/src/soc/amd/picasso/Kconfig b/src/soc/amd/picasso/Kconfig
index c4c7baeaeb..e9930e9998 100644
--- a/src/soc/amd/picasso/Kconfig
+++ b/src/soc/amd/picasso/Kconfig
@@ -42,6 +42,7 @@ config CPU_SPECIFIC_OPTIONS
 	select SOC_AMD_COMMON_BLOCK_SMI
 	select SOC_AMD_COMMON_BLOCK_SMU
 	select SOC_AMD_COMMON_BLOCK_TSC_FAM17H_19H
+	select SOC_AMD_COMMON_BLOCK_UART
 	select SOC_AMD_COMMON_BLOCK_PSP_GEN2
 	select PROVIDES_ROM_SHARING
 	select BOOT_DEVICE_SUPPORTS_WRITES if BOOT_DEVICE_SPI_FLASH
@@ -273,53 +274,6 @@ config PICASSO_ACPI_IO_BASE
 	help
 	  Base address for the ACPI registers.
 
-config AMD_SOC_CONSOLE_UART
-	bool "Use Picasso UART controller for console"
-	default n
-	select DRIVERS_UART_8250MEM
-	select DRIVERS_UART_8250MEM_32
-	select NO_UART_ON_SUPERIO
-	select UART_OVERRIDE_REFCLK
-	help
-	  There are four memory-mapped UARTs controllers in Picasso at:
-	  0: 0xfedc9000
-	  1: 0xfedca000
-	  2: 0xfedc3000
-	  3: 0xfedcf000
-
-choice
-	prompt "UART Frequency"
-	depends on AMD_SOC_CONSOLE_UART
-	default AMD_SOC_UART_48MZ
-
-config AMD_SOC_UART_48MZ
-	bool "48 MHz clock"
-	help
-	  Select this option for the most compatibility.
-
-config AMD_SOC_UART_1_8MZ
-	bool "1.8432 MHz clock"
-	help
-	  Select this option if an old payload or Linux ttyS0 arguments
-	  require it.
-
-endchoice
-
-config AMD_SOC_UART_LEGACY
-	bool "Decode legacy I/O range"
-	help
-	  Assign I/O 3F8, 2F8, etc. to a Picasso UART. A UART accessed with I/O
-	  does not allow all the features of MMIO. The MMIO decode is still
-	  present when this option is used.
-
-config CONSOLE_UART_BASE_ADDRESS
-	depends on CONSOLE_SERIAL && AMD_SOC_CONSOLE_UART
-	hex
-	default 0xfedc9000 if UART_FOR_CONSOLE = 0
-	default 0xfedca000 if UART_FOR_CONSOLE = 1
-	default 0xfedc3000 if UART_FOR_CONSOLE = 2
-	default 0xfedcf000 if UART_FOR_CONSOLE = 3
-
 config SMM_TSEG_SIZE
 	hex
 	default 0x800000 if SMM_TSEG && HAVE_SMI_HANDLER