Add support for LiPPERT Hurricane-LX (EPIC board with AMD Geode-LX,

CS5536, ITE IT8712F).  Board support is based on the SpaceRunner-LX
(with tiny bits from the RoadRunner-LX) even though the hardware really
was the ancestor of our three other -LX boards and in fact among the
earliest Geode-LX boards on the market.  (Might even have been the first
Geode-LX EPIC?)

Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5801 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

7 files changed, 501 insertions, 0 deletions

diff --git a/src/mainboard/lippert/Kconfig b/src/mainboard/lippert/Kconfig
index 58594e5b88..d2b08eb93a 100644
--- a/src/mainboard/lippert/Kconfig
+++ b/src/mainboard/lippert/Kconfig
@@ -5,6 +5,8 @@ choice
 
 config BOARD_LIPPERT_FRONTRUNNER
 	bool "Cool Frontrunner"
+config BOARD_LIPPERT_HURRICANE_LX
+	bool "Hurricane-LX"
 config BOARD_LIPPERT_LITERUNNER_LX
 	bool "Cool LiteRunner-LX"
 config BOARD_LIPPERT_ROADRUNNER_LX
@@ -15,6 +17,7 @@ config BOARD_LIPPERT_SPACERUNNER_LX
 endchoice
 
 source "src/mainboard/lippert/frontrunner/Kconfig"
+source "src/mainboard/lippert/hurricane-lx/Kconfig"
 source "src/mainboard/lippert/literunner-lx/Kconfig"
 source "src/mainboard/lippert/roadrunner-lx/Kconfig"
 source "src/mainboard/lippert/spacerunner-lx/Kconfig"
diff --git a/src/mainboard/lippert/hurricane-lx/Kconfig b/src/mainboard/lippert/hurricane-lx/Kconfig
new file mode 100644
index 0000000000..b30b8bba45
--- /dev/null
+++ b/src/mainboard/lippert/hurricane-lx/Kconfig
@@ -0,0 +1,45 @@
+if BOARD_LIPPERT_HURRICANE_LX
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select ARCH_X86
+	select CPU_AMD_LX
+	select NORTHBRIDGE_AMD_LX
+	select SOUTHBRIDGE_AMD_CS5536
+	select SUPERIO_ITE_IT8712F
+	select HAVE_PIRQ_TABLE
+	select PIRQ_ROUTE
+	select UDELAY_TSC
+	select CACHE_AS_RAM
+	# Board is equipped with a 1 MB SPI flash, however, due to limitations
+	# of the IT8712F Super I/O, only the top 512 KB are directly mapped.
+	select BOARD_ROMSIZE_KB_512
+
+config MAINBOARD_DIR
+	string
+	default lippert/hurricane-lx
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "Hurricane-LX"
+
+config IRQ_SLOT_COUNT
+	int
+	default 8
+
+config BOARD_OLD_REVISION
+	bool "Board is old pre-3.0 revision"
+	default n
+	help
+	  Look on the bottom side for a number like 406-0001-30.  The last 2
+	  digits state the PCB revision (3.0 in this example).  For 2.0 or older
+	  boards choose Y, for 3.0 and newer say N.
+
+config ONBOARD_UARTS_RS485
+	bool "Switch on-board serial ports to RS485"
+	default n
+	help
+	  If selected, both on-board serial ports will operate in RS485 mode
+	  instead of RS232.
+
+endif # BOARD_LIPPERT_HURRICANE_LX
diff --git a/src/mainboard/lippert/hurricane-lx/chip.h b/src/mainboard/lippert/hurricane-lx/chip.h
new file mode 100644
index 0000000000..0c70fcd3ba
--- /dev/null
+++ b/src/mainboard/lippert/hurricane-lx/chip.h
@@ -0,0 +1,23 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 LiPPERT Embedded Computers GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_ops;
+
+struct mainboard_config {};
diff --git a/src/mainboard/lippert/hurricane-lx/devicetree.cb b/src/mainboard/lippert/hurricane-lx/devicetree.cb
new file mode 100644
index 0000000000..17c0b8b659
--- /dev/null
+++ b/src/mainboard/lippert/hurricane-lx/devicetree.cb
@@ -0,0 +1,90 @@
+chip northbridge/amd/lx
+  device pci_domain 0 on
+    device pci 1.0 on end				# Northbridge
+    device pci 1.1 on end				# Graphics
+    device pci 1.2 on end				# AES
+    chip southbridge/amd/cs5536
+      # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK
+      # SIRQ Mode = Active(Quiet) mode. Save power....
+      # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse,
+      # UARTs, etc IRQs. OK
+      register "lpc_serirq_enable"        = "0x000012DA" # 00010010 11011010
+      register "lpc_serirq_polarity"      = "0x0000ED25" # inverse of above
+      register "lpc_serirq_mode"          = "1"
+      register "enable_gpio_int_route"    = "0x0D0C0700"
+      register "enable_ide_nand_flash"    = "0" # 0:ide mode, 1:flash
+      register "enable_USBP4_device"      = "0" # 0:host, 1:device
+      register "enable_USBP4_overcurrent" = "0" # 0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
+      register "com1_enable"              = "0"
+      register "com1_address"             = "0x3E8"
+      register "com1_irq"                 = "6"
+      register "com2_enable"              = "0"
+      register "com2_address"             = "0x2E8"
+      register "com2_irq"                 = "6"
+      register "unwanted_vpci[0]"         = "0" # End of list has a zero
+      device pci 8.0 on end		# Slot4
+      device pci 9.0 on end		# Slot3
+      device pci a.0 on end		# Slot2
+      device pci b.0 on end		# Slot1
+      device pci c.0 on end		# IT8888
+      device pci d.0 on end		# Mini-PCI
+      device pci e.0 on end		# Ethernet
+      device pci f.0 on			# ISA Bridge
+        chip superio/ite/it8712f
+          device pnp 2e.0 on		# Floppy
+            io 0x60 = 0x3f0
+            irq 0x70 = 6
+            drq 0x74 = 2
+          end
+          device pnp 2e.1 on		# Com1
+            io 0x60 = 0x3f8
+            irq 0x70 = 4
+          end
+          device pnp 2e.2 on		# Com2
+            io 0x60 = 0x2f8
+            irq 0x70 = 3
+          end
+          device pnp 2e.3 on		# Parallel port
+            io 0x60 = 0x378
+            irq 0x70 = 7
+          end
+          device pnp 2e.4 on		# EC
+            io 0x60 = 0x290 # EC
+            io 0x62 = 0x298 # PME
+            irq 0x70 = 9
+          end
+          device pnp 2e.5 on		# PS/2 keyboard
+            io 0x60 = 0x60
+            io 0x62 = 0x64
+            irq 0x70 = 1
+          end
+          device pnp 2e.6 on		# PS/2 mouse
+            irq 0x70 = 12
+          end
+          device pnp 2e.7 on		# GPIO
+            io 0x62 = 0x1220 # Simple I/O
+            io 0x64 = 0x1228 # SPI
+          end
+          device pnp 2e.8 off		# MIDI
+            io 0x60 = 0x300
+            irq 0x70 = 9
+          end
+          device pnp 2e.9 off		# Game port
+            io 0x60 = 0x220
+          end
+          device pnp 2e.a off end	# CIR
+        end
+      end
+      device pci f.2 on end		# IDE
+      device pci f.3 on end		# Audio
+      device pci f.4 on end		# OHCI
+      device pci f.5 on end		# EHCI
+    end
+  end
+  # APIC cluster is late CPU init.
+  device lapic_cluster 0 on
+    chip cpu/amd/model_lx
+      device lapic 0 on end
+    end
+  end
+end
diff --git a/src/mainboard/lippert/hurricane-lx/irq_tables.c b/src/mainboard/lippert/hurricane-lx/irq_tables.c
new file mode 100644
index 0000000000..705b8ea817
--- /dev/null
+++ b/src/mainboard/lippert/hurricane-lx/irq_tables.c
@@ -0,0 +1,76 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 LiPPERT Embedded Computers GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* Based on irq_tables.c from the SpaceRunner-LX mainboard. */
+
+#include <arch/pirq_routing.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <arch/pirq_routing.h>
+#include "../../../southbridge/amd/cs5536/cs5536.h"
+
+/* Platform IRQs */
+#define PIRQA 10
+#define PIRQB 11
+#define PIRQC 5
+#define PIRQD 15
+
+/* Map */
+#define M_PIRQA (1 << PIRQA)	/* Bitmap of supported IRQs */
+#define M_PIRQB (1 << PIRQB)	/* Bitmap of supported IRQs */
+#define M_PIRQC (1 << PIRQC)	/* Bitmap of supported IRQs */
+#define M_PIRQD (1 << PIRQD)	/* Bitmap of supported IRQs */
+
+/* Link */
+#define L_PIRQA	 1		/* Means Slot INTx# Connects To Chipset INTA# */
+#define L_PIRQB	 2		/* Means Slot INTx# Connects To Chipset INTB# */
+#define L_PIRQC	 3		/* Means Slot INTx# Connects To Chipset INTC# */
+#define L_PIRQD	 4		/* Means Slot INTx# Connects To Chipset INTD# */
+
+const struct irq_routing_table intel_irq_routing_table = {
+	PIRQ_SIGNATURE,		/* u32 signature */
+	PIRQ_VERSION,		/* u16 version   */
+	32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* There can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
+	0x00,			/* Where the interrupt router lies (bus) */
+	(0x0F << 3) | 0x0,	/* Where the interrupt router lies (dev) */
+	0x00,			/* IRQs devoted exclusively to PCI usage */
+	0x100B,			/* Vendor */
+	0x002B,			/* Device */
+	0,			/* Crap (miniport) */
+	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},	/* u8 rfu[11] */
+	0x36,			/* u8 checksum, this has to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
+	{
+		/* If you change the number of entries, change the CONFIG_IRQ_SLOT_COUNT above! */
+		/* bus, dev|fn,           {link, bitmap},      {link, bitmap},     {link, bitmap},     {link, bitmap},     slot, rfu */
+		{0x00, (0x01 << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {0x00, 0x00},       {0x00, 0x00},       {0x00, 0x00}},       0x0, 0x0},	/* CPU */
+		{0x00, (0x0F << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x0, 0x0},	/* chipset */
+		{0x00, (0x0E << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {0x00, 0x00},       {0x00, 0x00},       {0x00, 0x00}},       0x0, 0x0},	/* ethernet */
+		{0x00, (0x0B << 3) | 0x0, {{L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}}, 0x1, 0x0},	/* slot1 */
+		{0x00, (0x0A << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}}, 0x2, 0x0},	/* slot2 */
+		{0x00, (0x09 << 3) | 0x0, {{L_PIRQC, M_PIRQC}, {L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}}, 0x3, 0x0},	/* slot3 */
+		{0x00, (0x08 << 3) | 0x0, {{L_PIRQD, M_PIRQD}, {L_PIRQA, M_PIRQA}, {L_PIRQB, M_PIRQB}, {L_PIRQC, M_PIRQC}}, 0x4, 0x0},	/* slot4 */
+		{0x00, (0x0D << 3) | 0x0, {{L_PIRQB, M_PIRQB}, {L_PIRQA, M_PIRQA}, {0x00, 0x00},       {0x00, 0x00}},       0x5, 0x0},	/* Mini-PCI */
+	}
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	return copy_pirq_routing_table(addr);
+}
diff --git a/src/mainboard/lippert/hurricane-lx/mainboard.c b/src/mainboard/lippert/hurricane-lx/mainboard.c
new file mode 100644
index 0000000000..959966c4d9
--- /dev/null
+++ b/src/mainboard/lippert/hurricane-lx/mainboard.c
@@ -0,0 +1,89 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 LiPPERT Embedded Computers GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* Based on mainboard.c from the SpaceRunner-LX mainboard. */
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <arch/io.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "chip.h"
+
+/* Bit1 switches Com1 to RS485, bit2 same for Com2. */
+#if CONFIG_ONBOARD_UARTS_RS485
+	#define SIO_GP1X_CONFIG 0x06
+#else
+	#define SIO_GP1X_CONFIG 0x00
+#endif
+
+static const u16 ec_init_table[] = { /* hi=data, lo=index */
+	0x1900,		/* Enable monitoring */
+	0x0351,		/* TMPIN1,2 diode mode, TMPIN3 off */
+	0x805C,		/* Unlock zero adjust */
+	0x7056, 0x3C57,	/* Zero adjust TMPIN1,2 */
+	0x005C,		/* Lock zero adjust */
+	0xD014		/* Also set FAN_CTL polarity to Active High */
+};
+
+static void init(struct device *dev)
+{
+	unsigned int gpio_base, i;
+	printk(BIOS_DEBUG, "LiPPERT Hurricane-LX ENTER %s\n", __func__);
+
+	/* Init CS5536 GPIOs */
+	gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD,
+		    PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1;
+
+	outl(0x00000040, gpio_base + 0x00); // GPIO6  value      1 - LAN_PD#
+	outl(0x00000040, gpio_base + 0x08); // GPIO6  open drain 1 - LAN_PD# (jumpered GPIO per default)
+	outl(0x00000040, gpio_base + 0x04); // GPIO6  output     1 - LAN_PD#
+	outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1    1 - THRM_ALRM#
+	outl(0x00000400, gpio_base + 0x20); // GPIO10 input      1 - THRM_ALRM#
+#if !CONFIG_BOARD_OLD_REVISION
+	outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2   1 - 32kHz
+	outl(0x00000800, gpio_base + 0x84); // GPIO27 output     1 - 32kHz
+#endif
+	outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up    0 - 32kHz (new) / PM-LED (old)
+
+	/* Init Environment Controller. */
+	for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) {
+		u16 val = ec_init_table[i];
+		outb((u8)val, 0x0295);
+		outb(val >> 8, 0x0296);
+	}
+
+	/* bit2 = RS485_EN2, bit1 = RS485_EN1 */
+	outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */
+
+	printk(BIOS_DEBUG, "LiPPERT Hurricane-LX EXIT %s\n", __func__);
+}
+
+static void enable_dev(struct device *dev)
+{
+	dev->ops->init = init;
+}
+
+struct chip_operations mainboard_ops = {
+	CHIP_NAME("LiPPERT Hurricane-LX Mainboard")
+	.enable_dev = enable_dev,
+};
diff --git a/src/mainboard/lippert/hurricane-lx/romstage.c b/src/mainboard/lippert/hurricane-lx/romstage.c
new file mode 100644
index 0000000000..92f0f0f6f1
--- /dev/null
+++ b/src/mainboard/lippert/hurricane-lx/romstage.c
@@ -0,0 +1,175 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ * Copyright (C) 2010 LiPPERT Embedded Computers GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* Based on romstage.c from the SpaceRunner-LX mainboard. */
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/hlt.h>
+#include <console/console.h>
+#include "lib/ramtest.c"
+#include "cpu/x86/bist.h"
+#include "cpu/x86/msr.h"
+#include <cpu/amd/lxdef.h>
+#include <cpu/amd/geode_post_code.h>
+#include "southbridge/amd/cs5536/cs5536.h"
+
+#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
+#include "southbridge/amd/cs5536/cs5536_early_setup.c"
+#include "superio/ite/it8712f/it8712f_early_serial.c"
+
+/* Bit0 enables Spread Spectrum. */
+#define SMC_CONFIG	0x01
+
+#define ManualConf 1		/* No automatic strapped PLL config */
+#define PLLMSRhi 0x0000049C	/* Manual settings for the PLL */
+#define PLLMSRlo 0x00DE6001
+#define DIMM0 0xA0
+#define DIMM1 0xA2
+
+static inline int spd_read_byte(unsigned int device, unsigned int address)
+{
+	if (device != DIMM0)
+		return 0xFF;	/* No DIMM1, don't even try. */
+
+	return smbus_read_byte(device, address);
+}
+
+#if !CONFIG_BOARD_OLD_REVISION
+/* Send config data to System Management Controller via SMB. */
+static int smc_send_config(unsigned char config_data)
+{
+	if (smbus_check_stop_condition(SMBUS_IO_BASE))
+		return 1;
+	if (smbus_start_condition(SMBUS_IO_BASE))
+		return 2;
+	if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address
+		return 3;
+	if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data
+		return 4;
+	if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length
+		return 5;
+	if (smbus_send_command(SMBUS_IO_BASE, config_data))
+		return 6;
+	smbus_stop_condition(SMBUS_IO_BASE);
+	return 0;
+}
+#endif
+
+#include "northbridge/amd/lx/raminit.h"
+#include "northbridge/amd/lx/pll_reset.c"
+#include "northbridge/amd/lx/raminit.c"
+#include "lib/generic_sdram.c"
+#include "cpu/amd/model_lx/cpureginit.c"
+#include "cpu/amd/model_lx/syspreinit.c"
+#include "cpu/amd/model_lx/msrinit.c"
+
+static const u16 sio_init_table[] = { // hi=data, lo=index
+	0x0707,		// select LDN 7 (GPIO, SPI, watchdog, ...)
+	0x042C,		// disable ATXPG; VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 enabled
+	0x1423,		// don't delay PoWeROK1/2
+	0x9072,		// watchdog triggers PWROK, counts seconds
+#if !CONFIG_USE_WATCHDOG_ON_BOOT
+	0x0073, 0x0074,	// disarm watchdog by changing 56 s timeout to 0
+#endif
+	0xBF25, 0x172A, 0xF326,	// select GPIO function for most pins
+	0xBF27, 0xFF28, 0x2D29,	// (GP36=FAN_CTL3 (PWM), GP23,22,16,15=SPI, GP13=PWROK1)
+	0x66B8, 0x0CB9,	// enable pullups on SPI, RS485_EN
+	0x07C0,		// enable Simple-I/O for GP12-10= RS485_EN2,1, WD_ACTIVE
+	0x06C8,		// config GP12,11 as output, GP10 as input
+	0x2DF5,		// map Hw Monitor Thermal Output to GP55
+#if CONFIG_BOARD_OLD_REVISION
+	0x1F2A, 0xC072,	// switch GP13 to GPIO, WDT output from PWROK to KRST
+#endif
+};
+
+/* Early mainboard specific GPIO setup. */
+static void mb_gpio_init(void)
+{
+	int i;
+
+	/* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */
+	it8712f_enter_conf();
+	for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) {
+		u16 val = sio_init_table[i];
+		outb((u8)val, SIO_INDEX);
+		outb(val >> 8, SIO_DATA);
+	}
+	it8712f_exit_conf();
+}
+
+void main(unsigned long bist)
+{
+	post_code(0x01);
+
+	static const struct mem_controller memctrl[] = {
+		{.channel0 = {(0xa << 3) | 0, (0xa << 3) | 1}}
+	};
+
+	SystemPreInit();
+	msr_init();
+
+	cs5536_early_setup();
+
+	/*
+	 * Note: Must do this AFTER the early_setup! It is counting on some
+	 * early MSR setup for CS5536.
+	 */
+	it8712f_enable_serial(0, CONFIG_TTYS0_BASE); // Does not use its 1st parameter
+	mb_gpio_init();
+	uart_init();
+	console_init();
+
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+
+	pll_reset(ManualConf);
+
+	cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
+
+#if CONFIG_BOARD_OLD_REVISION
+	/*
+	 * Old revision boards need a jumper shorting the power button to power
+	 * on automatically. So we must disable the button's fail-safe function,
+	 * or the board will shut down after 4 s.
+	 */
+	outl(0, PMS_IO_BASE + PM_FSD); // Fail-Save Delay register
+#else
+	int err;
+	/* bit0 = Spread Spectrum */
+	if ((err = smc_send_config(SMC_CONFIG))) {
+		print_err("ERROR ");
+		print_err_char('0'+err);
+		print_err(" sending config data to SMC\n");
+	}
+#endif
+
+	sdram_initialize(1, memctrl);
+
+	/* Check memory. */
+	/* ram_check(0, 640 * 1024); */
+
+	/* Memory is setup. Return to cache_as_ram.inc and continue to boot. */
+	return;
+}