summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorUwe Hermann <uwe@hermann-uwe.de>2010-10-12 21:37:03 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2010-10-12 21:37:03 +0000
commitf1aa9841a948edf3615bcab72ce1e9d635eae412 (patch)
tree2f3da1e2c0eec645c5b78a1b6da9d4cc1e212679 /src
parent74d1a6e8a166cd477f667a6fcb1e96b8a0cbdac1 (diff)
Move translate_spd_to_i82810[] from .h to .c file (trivial).
This is in preparation of further i810 fixes and switching it to CAR. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5944 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/northbridge/intel/i82810/raminit.c54
-rw-r--r--src/northbridge/intel/i82810/raminit.h57
2 files changed, 54 insertions, 57 deletions
diff --git a/src/northbridge/intel/i82810/raminit.c b/src/northbridge/intel/i82810/raminit.c
index bdd945513d..9927cb65c0 100644
--- a/src/northbridge/intel/i82810/raminit.c
+++ b/src/northbridge/intel/i82810/raminit.c
@@ -58,6 +58,60 @@ Macros and definitions.
#define RAM_COMMAND_CBR 0x7 /* CBR */
/*
+ * This table is used to translate the value read from SPD Byte 31 to a value
+ * the northbridge can understand in DRP, aka Rx52[7:4], [3:0]. Where most
+ * northbridges have some sort of simple calculation that can be done for this,
+ * I haven't yet figured out one for this northbridge. Until someone does,
+ * this table is necessary.
+ */
+static const u8 translate_spd_to_i82810[] = {
+ /* Note: 4MB sizes are not supported, so dual-sided DIMMs with a 4MB
+ * side can't be either, at least for now.
+ */
+ /* TODO: For above case, only use the other side if > 4MB, and get some
+ * of these DIMMs to test it with. Same for unsupported 128/x sizes.
+ */
+
+ /* SPD Byte 31 Memory Size [Side 1/2] */
+ 0xff, /* 0x01 No memory */
+ 0xff, /* 0x01 4/0 */
+ 0x01, /* 0x02 8/0 */
+ 0xff, /* 0x03 8/4 */
+ 0x04, /* 0x04 16/0 or 16 */
+ 0xff, /* 0x05 16/4 */
+ 0x05, /* 0x06 16/8 */
+ 0xff, /* 0x07 Invalid */
+ 0x07, /* 0x08 32/0 or 32 */
+ 0xff, /* 0x09 32/4 */
+ 0xff, /* 0x0A 32/8 */
+ 0xff, /* 0x0B Invalid */
+ 0x08, /* 0x0C 32/16 */
+ 0xff, 0xff, 0xff, /* 0x0D-0F Invalid */
+ 0x0a, /* 0x10 64/0 or 64 */
+ 0xff, /* 0x11 64/4 */
+ 0xff, /* 0x12 64/8 */
+ 0xff, /* 0x13 Invalid */
+ 0xff, /* 0x14 64/16 */
+ 0xff, 0xff, 0xff, /* 0x15-17 Invalid */
+ 0x0b, /* 0x18 64/32 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 0x19-1f Invalid */
+ 0x0d, /* 0x20 128/0 or 128 */
+ /* These configurations are not supported by the i810 */
+ 0xff, /* 0x21 128/4 */
+ 0xff, /* 0x22 128/8 */
+ 0xff, /* 0x23 Invalid */
+ 0xff, /* 0x24 128/16 */
+ 0xff, 0xff, 0xff, /* 0x25-27 Invalid */
+ 0xff, /* 0x28 128/32 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 0x29-2f Invalid */
+ 0x0e, /* 0x30 128/64 */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, /* 0x31-3f Invalid */
+ 0x0f, /* 0x40 256/0 or 256 */
+ /* Anything larger is not supported by the 82810. */
+};
+
+/*
* Table which returns the RAM size in MB when fed the DRP[7:4] or [3:0] value.
* Note that 2 is a value which the DRP should never be programmed to.
* Some size values appear twice, due to single-sided vs dual-sided banks.
diff --git a/src/northbridge/intel/i82810/raminit.h b/src/northbridge/intel/i82810/raminit.h
index 31c86cb31e..f35832ecd0 100644
--- a/src/northbridge/intel/i82810/raminit.h
+++ b/src/northbridge/intel/i82810/raminit.h
@@ -27,61 +27,4 @@
/* DIMM0 is at 0x50, DIMM1 is at 0x51. */
#define DIMM_SPD_BASE 0x50
-/* The following table has been bumped over to this header to avoid clutter in
- * raminit.c. It's used to translate the value read from SPD Byte 31 to a value
- * the northbridge can understand in DRP, aka Rx52[7:4], [3:0]. Where most
- * northbridges have some sort of simple calculation that can be done for this,
- * I haven't yet figured out one for this northbridge. Until someone does,
- * this table is necessary.
- */
-
-/* TODO: Find a better way of doing this. */
-
-static const uint8_t translate_spd_to_i82810[] = {
- /* Note: 4MB sizes are not supported, so dual-sided DIMMs with a 4MB
- * side can't be either, at least for now.
- */
- /* TODO: For above case, only use the other side if > 4MB, and get some
- * of these DIMMs to test it with. Same for unsupported 128/x sizes.
- */
-
- /* SPD Byte 31 Memory Size [Side 1/2] */
- 0xff, /* 0x01 No memory */
- 0xff, /* 0x01 4/0 */
- 0x01, /* 0x02 8/0 */
- 0xff, /* 0x03 8/4 */
- 0x04, /* 0x04 16/0 or 16 */
- 0xff, /* 0x05 16/4 */
- 0x05, /* 0x06 16/8 */
- 0xff, /* 0x07 Invalid */
- 0x07, /* 0x08 32/0 or 32 */
- 0xff, /* 0x09 32/4 */
- 0xff, /* 0x0A 32/8 */
- 0xff, /* 0x0B Invalid */
- 0x08, /* 0x0C 32/16 */
- 0xff, 0xff, 0xff, /* 0x0D-0F Invalid */
- 0x0a, /* 0x10 64/0 or 64 */
- 0xff, /* 0x11 64/4 */
- 0xff, /* 0x12 64/8 */
- 0xff, /* 0x13 Invalid */
- 0xff, /* 0x14 64/16 */
- 0xff, 0xff, 0xff, /* 0x15-17 Invalid */
- 0x0b, /* 0x18 64/32 */
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 0x19-1f Invalid */
- 0x0d, /* 0x20 128/0 or 128 */
- /* These configurations are not supported by the i810 */
- 0xff, /* 0x21 128/4 */
- 0xff, /* 0x22 128/8 */
- 0xff, /* 0x23 Invalid */
- 0xff, /* 0x24 128/16 */
- 0xff, 0xff, 0xff, /* 0x25-27 Invalid */
- 0xff, /* 0x28 128/32 */
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 0x29-2f Invalid */
- 0x0e, /* 0x30 128/64 */
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
- 0xff, 0xff, 0xff, /* 0x31-3f Invalid */
- 0x0f, /* 0x40 256/0 or 256 */
- /* Anything larger is not supported by the 82810. */
-};
-
#endif /* NORTHBRIDGE_INTEL_I82810_RAMINIT_H */