nb/intel/hsw,soc/intel/{bdw,skl,apl},mb/*: unify dt panel settings

There are multiple different devicetree setting formats for graphics
panel settings present in coreboot. Replace the ones for the platforms
that already have (mostly) unified gma/graphics setup code by a unified
struct in the gma driver. Hook it up in HSW, BDW, SKL, and APL and adapt
the devicetrees accordingly.

Always ensure that values don't overflow by applying appropriate masks.

The remaining platforms implementing panel settings (GM45, i945, ILK and
SNB) can be migrated later after unifying their gma/graphics setup code.

Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I445defe01d5fbf9a69cf05cf1b5bd6c7c2c1725e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>

32 files changed, 247 insertions, 246 deletions

diff --git a/src/drivers/intel/gma/gma.h b/src/drivers/intel/gma/gma.h
index d7a336c537..ee7d7301c2 100644
--- a/src/drivers/intel/gma/gma.h
+++ b/src/drivers/intel/gma/gma.h
@@ -11,6 +11,20 @@ struct i915_gpu_controller_info {
 	u32 did[5];
 };
 
+/* Devicetree panel configuration */
+struct i915_gpu_panel_config {
+	unsigned int up_delay_ms;
+	unsigned int down_delay_ms;
+	unsigned int cycle_delay_ms;
+	unsigned int backlight_on_delay_ms;
+	unsigned int backlight_off_delay_ms;
+	unsigned int backlight_pwm_hz;
+	enum {
+		GPU_BACKLIGHT_POLARITY_HIGH = 0,
+		GPU_BACKLIGHT_POLARITY_LOW,
+	} backlight_polarity;
+};
+
 #define GMA_STATIC_DISPLAYS(ssc) {			\
 	.use_spread_spectrum_clock = (ssc),		\
 	.ndid = 3, .did = { 0x0100, 0x0240, 0x0410, }	\
diff --git a/src/mainboard/51nb/x210/devicetree.cb b/src/mainboard/51nb/x210/devicetree.cb
index b51c73c486..433bc22fbb 100644
--- a/src/mainboard/51nb/x210/devicetree.cb
+++ b/src/mainboard/51nb/x210/devicetree.cb
@@ -1,11 +1,13 @@
 chip soc/intel/skylake
 
 	# Enable Panel as eDP and configure power delays
-	register "gpu_pp_up_delay_ms"		  = "210"	# T3
-	register "gpu_pp_down_delay_ms"		  = "500"	# T10
-	register "gpu_pp_cycle_delay_ms"	  = "5000"	# T12
-	register "gpu_pp_backlight_on_delay_ms"	  = "1"		# T7
-	register "gpu_pp_backlight_off_delay_ms"  = "200"	# T9
+	register "panel_cfg" = "{
+		.up_delay_ms		=  210,	// T3
+		.down_delay_ms		=  500,	// T10
+		.cycle_delay_ms		= 5000,	// T12
+		.backlight_on_delay_ms	=    1,	// T7
+		.backlight_off_delay_ms	=  200,	// T9
+	}"
 
 	# Enable deep Sx states
 	register "deep_s3_enable_ac" = "1"
diff --git a/src/mainboard/clevo/kbl-u/variants/n13xwu/devicetree.cb b/src/mainboard/clevo/kbl-u/variants/n13xwu/devicetree.cb
index 808ece0e3d..29f57bd643 100644
--- a/src/mainboard/clevo/kbl-u/variants/n13xwu/devicetree.cb
+++ b/src/mainboard/clevo/kbl-u/variants/n13xwu/devicetree.cb
@@ -1,13 +1,14 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 chip soc/intel/skylake
-	register "gpu_pp_up_delay_ms"		  = "200"	# T3
-	register "gpu_pp_down_delay_ms"		  = "  0"	# T10
-	register "gpu_pp_cycle_delay_ms"	  = "500"	# T12
-	register "gpu_pp_backlight_on_delay_ms"	  = " 50"	# T7
-	register "gpu_pp_backlight_off_delay_ms"  = "  0"	# T9
-
-	register "gpu_pch_backlight_pwm_hz"	  = "200"
+	register "panel_cfg" = "{
+		.up_delay_ms		= 200,	// T3
+		.down_delay_ms		=   0,	// T10
+		.cycle_delay_ms		= 500,	// T12
+		.backlight_on_delay_ms	=  50,	// T7
+		.backlight_off_delay_ms	=   0,	// T9
+		.backlight_pwm_hz	= 200,
+	}"
 
 	# IGD Displays
 	register "gfx" = "GMA_STATIC_DISPLAYS(0)"
diff --git a/src/mainboard/google/auron/devicetree.cb b/src/mainboard/google/auron/devicetree.cb
index 26a53366b4..8bf2c129a4 100644
--- a/src/mainboard/google/auron/devicetree.cb
+++ b/src/mainboard/google/auron/devicetree.cb
@@ -12,9 +12,6 @@ chip soc/intel/broadwell
 	# Enable HDMI Hotplug with 6ms pulse
 	register "gpu_dp_b_hotplug" = "0x06"
 
-	# Set backlight PWM value for eDP
-	register "gpu_pch_backlight_pwm_hz" = "200"
-
 	register "s0ix_enable" = "1"
 
 	device cpu_cluster 0 on
diff --git a/src/mainboard/google/auron/variants/auron_paine/overridetree.cb b/src/mainboard/google/auron/variants/auron_paine/overridetree.cb
index cb7fb62b34..62e42b1718 100644
--- a/src/mainboard/google/auron/variants/auron_paine/overridetree.cb
+++ b/src/mainboard/google/auron/variants/auron_paine/overridetree.cb
@@ -1,11 +1,13 @@
 chip soc/intel/broadwell
 
-	# Set panel power delays
-	register "gpu_panel_power_cycle_delay_ms" = "400"
-	register "gpu_panel_power_up_delay_ms" = "40"
-	register "gpu_panel_power_down_delay_ms" = "15"
-	register "gpu_panel_power_backlight_on_delay_ms" = "7"
-	register "gpu_panel_power_backlight_off_delay_ms" = "210"
+	register "panel_cfg" = "{
+		.up_delay_ms		=  40,
+		.down_delay_ms		=  15,
+		.cycle_delay_ms		= 400,
+		.backlight_on_delay_ms	=   7,
+		.backlight_off_delay_ms	= 210,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	device domain 0 on
 		chip soc/intel/broadwell/pch
diff --git a/src/mainboard/google/auron/variants/auron_yuna/overridetree.cb b/src/mainboard/google/auron/variants/auron_yuna/overridetree.cb
index 746ec9a58f..174463d0b7 100644
--- a/src/mainboard/google/auron/variants/auron_yuna/overridetree.cb
+++ b/src/mainboard/google/auron/variants/auron_yuna/overridetree.cb
@@ -1,11 +1,13 @@
 chip soc/intel/broadwell
 
-	# Set panel power delays
-	register "gpu_panel_power_cycle_delay_ms" = "400"
-	register "gpu_panel_power_up_delay_ms" = "40"
-	register "gpu_panel_power_down_delay_ms" = "15"
-	register "gpu_panel_power_backlight_on_delay_ms" = "210"
-	register "gpu_panel_power_backlight_off_delay_ms" = "210"
+	register "panel_cfg" = "{
+		.up_delay_ms		=  40,
+		.down_delay_ms		=  15,
+		.cycle_delay_ms		= 400,
+		.backlight_on_delay_ms	= 210,
+		.backlight_off_delay_ms	= 210,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	device domain 0 on
 		chip soc/intel/broadwell/pch
diff --git a/src/mainboard/google/auron/variants/buddy/overridetree.cb b/src/mainboard/google/auron/variants/buddy/overridetree.cb
index 5423043cd8..6762eb42c4 100644
--- a/src/mainboard/google/auron/variants/buddy/overridetree.cb
+++ b/src/mainboard/google/auron/variants/buddy/overridetree.cb
@@ -1,11 +1,13 @@
 chip soc/intel/broadwell
 
-	# Set panel power delays
-	register "gpu_panel_power_cycle_delay_ms" = "400"
-	register "gpu_panel_power_up_delay_ms" = "40"
-	register "gpu_panel_power_down_delay_ms" = "15"
-	register "gpu_panel_power_backlight_on_delay_ms" = "7"
-	register "gpu_panel_power_backlight_off_delay_ms" = "210"
+	register "panel_cfg" = "{
+		.up_delay_ms		=  40,
+		.down_delay_ms		=  15,
+		.cycle_delay_ms		= 400,
+		.backlight_on_delay_ms	=   7,
+		.backlight_off_delay_ms	= 210,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	register "s0ix_enable" = "0"
 
diff --git a/src/mainboard/google/auron/variants/gandof/overridetree.cb b/src/mainboard/google/auron/variants/gandof/overridetree.cb
index 19c0ca0003..ca5d616659 100644
--- a/src/mainboard/google/auron/variants/gandof/overridetree.cb
+++ b/src/mainboard/google/auron/variants/gandof/overridetree.cb
@@ -1,11 +1,13 @@
 chip soc/intel/broadwell
 
-	# Set panel power delays
-	register "gpu_panel_power_cycle_delay_ms" = "400"
-	register "gpu_panel_power_up_delay_ms" = "40"
-	register "gpu_panel_power_down_delay_ms" = "15"
-	register "gpu_panel_power_backlight_on_delay_ms" = "50"
-	register "gpu_panel_power_backlight_off_delay_ms" = "210"
+	register "panel_cfg" = "{
+		.up_delay_ms		=  40,
+		.down_delay_ms		=  15,
+		.cycle_delay_ms		= 400,
+		.backlight_on_delay_ms	=  50,
+		.backlight_off_delay_ms	= 210,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	device domain 0 on
 		chip soc/intel/broadwell/pch
diff --git a/src/mainboard/google/auron/variants/lulu/overridetree.cb b/src/mainboard/google/auron/variants/lulu/overridetree.cb
index cb7fb62b34..62e42b1718 100644
--- a/src/mainboard/google/auron/variants/lulu/overridetree.cb
+++ b/src/mainboard/google/auron/variants/lulu/overridetree.cb
@@ -1,11 +1,13 @@
 chip soc/intel/broadwell
 
-	# Set panel power delays
-	register "gpu_panel_power_cycle_delay_ms" = "400"
-	register "gpu_panel_power_up_delay_ms" = "40"
-	register "gpu_panel_power_down_delay_ms" = "15"
-	register "gpu_panel_power_backlight_on_delay_ms" = "7"
-	register "gpu_panel_power_backlight_off_delay_ms" = "210"
+	register "panel_cfg" = "{
+		.up_delay_ms		=  40,
+		.down_delay_ms		=  15,
+		.cycle_delay_ms		= 400,
+		.backlight_on_delay_ms	=   7,
+		.backlight_off_delay_ms	= 210,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	device domain 0 on
 		chip soc/intel/broadwell/pch
diff --git a/src/mainboard/google/auron/variants/samus/overridetree.cb b/src/mainboard/google/auron/variants/samus/overridetree.cb
index 989b887628..34a785b711 100644
--- a/src/mainboard/google/auron/variants/samus/overridetree.cb
+++ b/src/mainboard/google/auron/variants/samus/overridetree.cb
@@ -3,12 +3,14 @@ chip soc/intel/broadwell
 	# Enable DDI2 Hotplug with 6ms pulse
 	register "gpu_dp_c_hotplug" = "0x06"
 
-	# Set panel power delays
-	register "gpu_panel_power_cycle_delay_ms" = "500"
-	register "gpu_panel_power_up_delay_ms" = "200"
-	register "gpu_panel_power_down_delay_ms" = "50"
-	register "gpu_panel_power_backlight_on_delay_ms" = "200"
-	register "gpu_panel_power_backlight_off_delay_ms" = "200"
+	register "panel_cfg" = "{
+		.up_delay_ms		= 200,
+		.down_delay_ms		=  50,
+		.cycle_delay_ms		= 500,
+		.backlight_on_delay_ms	= 200,
+		.backlight_off_delay_ms	= 200,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	register "vr_slow_ramp_rate_set" = "3"
 	register "vr_slow_ramp_rate_enable" = "1"
diff --git a/src/mainboard/google/eve/devicetree.cb b/src/mainboard/google/eve/devicetree.cb
index 0e76de140f..c0531fa238 100644
--- a/src/mainboard/google/eve/devicetree.cb
+++ b/src/mainboard/google/eve/devicetree.cb
@@ -3,13 +3,14 @@ chip soc/intel/skylake
 	# IGD Displays
 	register "gfx" = "GMA_STATIC_DISPLAYS(0)"
 
-	register "gpu_pp_up_delay_ms"		  = "100"
-	register "gpu_pp_down_delay_ms"		  = "500"
-	register "gpu_pp_cycle_delay_ms"	  = "500"
-	register "gpu_pp_backlight_on_delay_ms"	  = "  1"
-	register "gpu_pp_backlight_off_delay_ms"  = "200"
-
-	register "gpu_pch_backlight_pwm_hz"	  = "1000"
+	register "panel_cfg" = "{
+		.up_delay_ms		=  100,
+		.down_delay_ms		=  500,
+		.cycle_delay_ms		=  500,
+		.backlight_on_delay_ms	=    1,
+		.backlight_off_delay_ms	=  200,
+		.backlight_pwm_hz	= 1000,
+	}"
 
 	# Enable deep Sx states
 	register "deep_s3_enable_ac" = "0"
diff --git a/src/mainboard/google/fizz/variants/baseboard/devicetree.cb b/src/mainboard/google/fizz/variants/baseboard/devicetree.cb
index 8c31f9ac70..e9d5a3544a 100644
--- a/src/mainboard/google/fizz/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/fizz/variants/baseboard/devicetree.cb
@@ -1,12 +1,13 @@
 chip soc/intel/skylake
 
-	register "gpu_pp_up_delay_ms"		  = "200"
-	register "gpu_pp_down_delay_ms"		  = " 50"
-	register "gpu_pp_cycle_delay_ms"	  = "500"
-	register "gpu_pp_backlight_on_delay_ms"	  = "  1"
-	register "gpu_pp_backlight_off_delay_ms"  = "200"
-
-	register "gpu_pch_backlight_pwm_hz"	  = "200"
+	register "panel_cfg" = "{
+		.up_delay_ms		= 200,
+		.down_delay_ms		=  50,
+		.cycle_delay_ms		= 500,
+		.backlight_on_delay_ms	=   1,
+		.backlight_off_delay_ms	= 200,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	# Deep Sx states
 	register "deep_s3_enable_ac" = "0"
diff --git a/src/mainboard/google/glados/devicetree.cb b/src/mainboard/google/glados/devicetree.cb
index 127334e1ba..5a48c5db47 100644
--- a/src/mainboard/google/glados/devicetree.cb
+++ b/src/mainboard/google/glados/devicetree.cb
@@ -3,13 +3,14 @@ chip soc/intel/skylake
 	# IGD Displays
 	register "gfx" = "GMA_STATIC_DISPLAYS(0)"
 
-	register "gpu_pp_up_delay_ms"		  = "200"
-	register "gpu_pp_down_delay_ms"		  = " 50"
-	register "gpu_pp_cycle_delay_ms"	  = "500"
-	register "gpu_pp_backlight_on_delay_ms"	  = "  1"
-	register "gpu_pp_backlight_off_delay_ms"  = "200"
-
-	register "gpu_pch_backlight_pwm_hz"	  = "1000"
+	register "panel_cfg" = "{
+		.up_delay_ms		=  200,
+		.down_delay_ms		=   50,
+		.cycle_delay_ms		=  500,
+		.backlight_on_delay_ms	=    1,
+		.backlight_off_delay_ms	=  200,
+		.backlight_pwm_hz	= 1000,
+	}"
 
 	# Enable deep Sx states
 	register "deep_s3_enable_ac" = "0"
diff --git a/src/mainboard/google/poppy/variants/atlas/devicetree.cb b/src/mainboard/google/poppy/variants/atlas/devicetree.cb
index a14e927b0f..d3e351ad4f 100644
--- a/src/mainboard/google/poppy/variants/atlas/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/atlas/devicetree.cb
@@ -3,12 +3,14 @@ chip soc/intel/skylake
 	# IGD Displays
 	register "gfx" = "GMA_STATIC_DISPLAYS(0)"
 
-	register "gpu_pp_up_delay_ms"		  = "200"
-	register "gpu_pp_down_delay_ms"		  = "50"
-	register "gpu_pp_cycle_delay_ms"	  = "600"
-	register "gpu_pp_backlight_on_delay_ms"	  = "  1"
-	register "gpu_pp_backlight_off_delay_ms"  = "200"
-	register "gpu_pch_backlight_pwm_hz"	  = "200"
+	register "panel_cfg" = "{
+		.up_delay_ms		= 200,
+		.down_delay_ms		=  50,
+		.cycle_delay_ms		= 600,
+		.backlight_on_delay_ms	=   1,
+		.backlight_off_delay_ms	= 200,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	# Deep Sx states
 	register "deep_s3_enable_ac" = "0"
diff --git a/src/mainboard/google/poppy/variants/rammus/devicetree.cb b/src/mainboard/google/poppy/variants/rammus/devicetree.cb
index ff117c8aa2..162b437f32 100644
--- a/src/mainboard/google/poppy/variants/rammus/devicetree.cb
+++ b/src/mainboard/google/poppy/variants/rammus/devicetree.cb
@@ -3,12 +3,14 @@ chip soc/intel/skylake
 	# IGD Displays
 	register "gfx" = "GMA_STATIC_DISPLAYS(0)"
 
-	register "gpu_pp_up_delay_ms"		  = "200"
-	register "gpu_pp_down_delay_ms"		  = "500"
-	register "gpu_pp_cycle_delay_ms"	  = "600"
-	register "gpu_pp_backlight_on_delay_ms"	  = "  1"
-	register "gpu_pp_backlight_off_delay_ms"  = "200"
-	register "gpu_pch_backlight_pwm_hz"	  = "1000"
+	register "panel_cfg" = "{
+		.up_delay_ms		=  200,
+		.down_delay_ms		=  500,
+		.cycle_delay_ms		=  600,
+		.backlight_on_delay_ms	=    1,
+		.backlight_off_delay_ms	=  200,
+		.backlight_pwm_hz	= 1000,
+	}"
 
 	# Deep Sx states
 	register "deep_s3_enable_ac" = "0"
diff --git a/src/mainboard/google/slippy/devicetree.cb b/src/mainboard/google/slippy/devicetree.cb
index a6fab83a5b..99cae7a406 100644
--- a/src/mainboard/google/slippy/devicetree.cb
+++ b/src/mainboard/google/slippy/devicetree.cb
@@ -11,9 +11,6 @@ chip northbridge/intel/haswell
 	# Enable HDMI Hotplug with 6ms pulse
 	register "gpu_dp_b_hotplug" = "0x06"
 
-	# Set backlight PWM value for eDP
-	register "gpu_pch_backlight_pwm_hz" = "200"
-
 	register "ec_present" = "true"
 
 	register "usb_xhci_on_resume" = "true"
diff --git a/src/mainboard/google/slippy/variants/falco/overridetree.cb b/src/mainboard/google/slippy/variants/falco/overridetree.cb
index 54ae6151d2..fc77345dab 100644
--- a/src/mainboard/google/slippy/variants/falco/overridetree.cb
+++ b/src/mainboard/google/slippy/variants/falco/overridetree.cb
@@ -1,11 +1,13 @@
 chip northbridge/intel/haswell
 
-	# Set panel power delays
-	register "gpu_panel_power_cycle_delay_ms" = "400"
-	register "gpu_panel_power_up_delay_ms" = "60"
-	register "gpu_panel_power_down_delay_ms" = "60"
-	register "gpu_panel_power_backlight_on_delay_ms" = "210"
-	register "gpu_panel_power_backlight_off_delay_ms" = "210"
+	register "panel_cfg" = "{
+		.up_delay_ms		=  60,
+		.down_delay_ms		=  60,
+		.cycle_delay_ms		= 400,
+		.backlight_on_delay_ms	= 210,
+		.backlight_off_delay_ms	= 210,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	device domain 0 on
 
diff --git a/src/mainboard/google/slippy/variants/leon/overridetree.cb b/src/mainboard/google/slippy/variants/leon/overridetree.cb
index 9c45f0062b..1d50086c58 100644
--- a/src/mainboard/google/slippy/variants/leon/overridetree.cb
+++ b/src/mainboard/google/slippy/variants/leon/overridetree.cb
@@ -1,11 +1,13 @@
 chip northbridge/intel/haswell
 
-	# Set panel power delays
-	register "gpu_panel_power_cycle_delay_ms" = "400"
-	register "gpu_panel_power_up_delay_ms" = "40"
-	register "gpu_panel_power_down_delay_ms" = "15"
-	register "gpu_panel_power_backlight_on_delay_ms" = "210"
-	register "gpu_panel_power_backlight_off_delay_ms" = "210"
+	register "panel_cfg" = "{
+		.up_delay_ms		=  40,
+		.down_delay_ms		=  15,
+		.cycle_delay_ms		= 400,
+		.backlight_on_delay_ms	= 210,
+		.backlight_off_delay_ms	= 210,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	device domain 0 on
 
diff --git a/src/mainboard/google/slippy/variants/peppy/overridetree.cb b/src/mainboard/google/slippy/variants/peppy/overridetree.cb
index 47edc62397..e732a9270c 100644
--- a/src/mainboard/google/slippy/variants/peppy/overridetree.cb
+++ b/src/mainboard/google/slippy/variants/peppy/overridetree.cb
@@ -1,11 +1,13 @@
 chip northbridge/intel/haswell
 
-	# Set panel power delays
-	register "gpu_panel_power_cycle_delay_ms" = "400"
-	register "gpu_panel_power_up_delay_ms" = "40"
-	register "gpu_panel_power_down_delay_ms" = "15"
-	register "gpu_panel_power_backlight_on_delay_ms" = "210"
-	register "gpu_panel_power_backlight_off_delay_ms" = "210"
+	register "panel_cfg" = "{
+		.up_delay_ms		=  40,
+		.down_delay_ms		=  15,
+		.cycle_delay_ms		= 400,
+		.backlight_on_delay_ms	= 210,
+		.backlight_off_delay_ms	= 210,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	device domain 0 on
 
diff --git a/src/mainboard/google/slippy/variants/wolf/overridetree.cb b/src/mainboard/google/slippy/variants/wolf/overridetree.cb
index 43bdf561d6..824694720d 100644
--- a/src/mainboard/google/slippy/variants/wolf/overridetree.cb
+++ b/src/mainboard/google/slippy/variants/wolf/overridetree.cb
@@ -1,11 +1,13 @@
 chip northbridge/intel/haswell
 
-	# Set panel power delays
-	register "gpu_panel_power_cycle_delay_ms" = "500"
-	register "gpu_panel_power_up_delay_ms" = "200"
-	register "gpu_panel_power_down_delay_ms" = "50"
-	register "gpu_panel_power_backlight_on_delay_ms" = "1"
-	register "gpu_panel_power_backlight_off_delay_ms" = "200"
+	register "panel_cfg" = "{
+		.up_delay_ms		= 200,
+		.down_delay_ms		=  50,
+		.cycle_delay_ms		= 500,
+		.backlight_on_delay_ms	=   1,
+		.backlight_off_delay_ms	= 200,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	device domain 0 on
 
diff --git a/src/mainboard/hp/folio_9480m/devicetree.cb b/src/mainboard/hp/folio_9480m/devicetree.cb
index 9baec90d64..712d75e2c4 100644
--- a/src/mainboard/hp/folio_9480m/devicetree.cb
+++ b/src/mainboard/hp/folio_9480m/devicetree.cb
@@ -4,12 +4,14 @@ chip northbridge/intel/haswell
 	register "gfx" = "GMA_STATIC_DISPLAYS(0)"
 	register "gpu_dp_b_hotplug" = "4"
 	register "gpu_dp_c_hotplug" = "4"
-	register "gpu_panel_power_backlight_off_delay_ms" = "1"
-	register "gpu_panel_power_backlight_on_delay_ms" = "1"
-	register "gpu_panel_power_cycle_delay_ms" = "500"
-	register "gpu_panel_power_down_delay_ms" = "50"
-	register "gpu_panel_power_up_delay_ms" = "200"
-	register "gpu_pch_backlight_pwm_hz" = "200"
+	register "panel_cfg" = "{
+		.up_delay_ms		= 200,
+		.down_delay_ms		=  50,
+		.cycle_delay_ms		= 500,
+		.backlight_on_delay_ms	=   1,
+		.backlight_off_delay_ms	=   1,
+		.backlight_pwm_hz	= 200,
+	}"
 	register "usb_xhci_on_resume" = "true"
 	device cpu_cluster 0 on
 		chip cpu/intel/haswell
diff --git a/src/mainboard/lenovo/t440p/devicetree.cb b/src/mainboard/lenovo/t440p/devicetree.cb
index e17807f247..fb0442d567 100644
--- a/src/mainboard/lenovo/t440p/devicetree.cb
+++ b/src/mainboard/lenovo/t440p/devicetree.cb
@@ -4,12 +4,14 @@ chip northbridge/intel/haswell
 	register "gpu_dp_b_hotplug" = "4"
 	register "gpu_dp_c_hotplug" = "4"
 	register "gpu_dp_d_hotplug" = "4"
-	register "gpu_panel_power_backlight_off_delay_ms" = "1"
-	register "gpu_panel_power_backlight_on_delay_ms" = "1"
-	register "gpu_panel_power_cycle_delay_ms" = "500"
-	register "gpu_panel_power_down_delay_ms" = "50"
-	register "gpu_panel_power_up_delay_ms" = "200"
-	register "gpu_pch_backlight_pwm_hz" = "220"
+	register "panel_cfg" = "{
+		.up_delay_ms		= 200,
+		.down_delay_ms		=  50,
+		.cycle_delay_ms		= 500,
+		.backlight_on_delay_ms	=   1,
+		.backlight_off_delay_ms	=   1,
+		.backlight_pwm_hz	= 220,
+	}"
 	register "ec_present" = "true"
 	device cpu_cluster 0x0 on
 		chip cpu/intel/haswell
diff --git a/src/mainboard/purism/librem_bdw/devicetree.cb b/src/mainboard/purism/librem_bdw/devicetree.cb
index 41943e72ef..cd5bb44b7c 100644
--- a/src/mainboard/purism/librem_bdw/devicetree.cb
+++ b/src/mainboard/purism/librem_bdw/devicetree.cb
@@ -6,15 +6,14 @@ chip soc/intel/broadwell
 	# Enable DDI1 Hotplug with 6ms pulse
 	register "gpu_dp_b_hotplug" = "0x06"
 
-	# Set backlight PWM value for eDP
-	register "gpu_pch_backlight_pwm_hz" = "200"
-
-	# Set panel power delays
-	register "gpu_panel_power_cycle_delay_ms" = "500"
-	register "gpu_panel_power_up_delay_ms" = "200"
-	register "gpu_panel_power_down_delay_ms" = "50"
-	register "gpu_panel_power_backlight_on_delay_ms" = "200"
-	register "gpu_panel_power_backlight_off_delay_ms" = "200"
+	register "panel_cfg" = "{
+		.up_delay_ms		= 200,
+		.down_delay_ms		=  50,
+		.cycle_delay_ms		= 500,
+		.backlight_on_delay_ms	= 200,
+		.backlight_off_delay_ms	= 200,
+		.backlight_pwm_hz	= 200,
+	}"
 
 	device cpu_cluster 0 on
 		device lapic 0 on end
diff --git a/src/mainboard/purism/librem_skl/devicetree.cb b/src/mainboard/purism/librem_skl/devicetree.cb
index c59df40518..c3a9567ccf 100644
--- a/src/mainboard/purism/librem_skl/devicetree.cb
+++ b/src/mainboard/purism/librem_skl/devicetree.cb
@@ -1,16 +1,17 @@
 chip soc/intel/skylake
 
-	register "gpu_pp_up_delay_ms"		  = "200"
-	register "gpu_pp_down_delay_ms"		  = " 50"
-	register "gpu_pp_cycle_delay_ms"	  = "500"
-	register "gpu_pp_backlight_on_delay_ms"	  = "  1"
-	register "gpu_pp_backlight_off_delay_ms"  = "200"
-
-	register "gpu_pch_backlight_pwm_hz"	  = "200"
-
 	# IGD Displays
 	register "gfx" = "GMA_STATIC_DISPLAYS(0)"
 
+	register "panel_cfg" = "{
+		.up_delay_ms		= 200,
+		.down_delay_ms		=  50,
+		.cycle_delay_ms		= 500,
+		.backlight_on_delay_ms	=   1,
+		.backlight_off_delay_ms	= 200,
+		.backlight_pwm_hz	= 200,
+	}"
+
 	register "deep_s3_enable_ac" = "0"
 	register "deep_s3_enable_dc" = "0"
 	register "deep_s5_enable_ac" = "0"
diff --git a/src/northbridge/intel/haswell/chip.h b/src/northbridge/intel/haswell/chip.h
index b1c8d37a74..99102b6770 100644
--- a/src/northbridge/intel/haswell/chip.h
+++ b/src/northbridge/intel/haswell/chip.h
@@ -3,7 +3,7 @@
 #ifndef NORTHBRIDGE_INTEL_HASWELL_CHIP_H
 #define NORTHBRIDGE_INTEL_HASWELL_CHIP_H
 
-#include <drivers/intel/gma/i915.h>
+#include <drivers/intel/gma/gma.h>
 
 /*
  * Digital Port Hotplug Enable:
@@ -17,17 +17,8 @@ struct northbridge_intel_haswell_config {
 	u8 gpu_dp_c_hotplug; /* Digital Port C Hotplug Config */
 	u8 gpu_dp_d_hotplug; /* Digital Port D Hotplug Config */
 
-	u16 gpu_panel_power_cycle_delay_ms;          /* T4 time sequence */
-	u16 gpu_panel_power_up_delay_ms;            /* T1+T2 time sequence */
-	u16 gpu_panel_power_down_delay_ms;          /* T3 time sequence */
-	u16 gpu_panel_power_backlight_on_delay_ms;  /* T5 time sequence */
-	u16 gpu_panel_power_backlight_off_delay_ms; /* Tx time sequence */
-
-	unsigned int gpu_pch_backlight_pwm_hz;
-	enum {
-		GPU_BACKLIGHT_POLARITY_HIGH = 0,
-		GPU_BACKLIGHT_POLARITY_LOW,
-	} gpu_pch_backlight_polarity;
+	/* IGD panel configuration */
+	struct i915_gpu_panel_config panel_cfg;
 
 	bool gpu_ddi_e_connected;
 
diff --git a/src/northbridge/intel/haswell/gma.c b/src/northbridge/intel/haswell/gma.c
index 7adcfdaa5c..21053ec1c0 100644
--- a/src/northbridge/intel/haswell/gma.c
+++ b/src/northbridge/intel/haswell/gma.c
@@ -243,6 +243,7 @@ static void init_display_planes(void)
 static void gma_setup_panel(struct device *dev)
 {
 	struct northbridge_intel_haswell_config *conf = config_of(dev);
+	const struct i915_gpu_panel_config *panel_cfg = &conf->panel_cfg;
 	u32 reg32;
 
 	/* Setup Digital Port Hotplug */
@@ -257,30 +258,30 @@ static void gma_setup_panel(struct device *dev)
 	/* Setup Panel Power On Delays */
 	reg32 = gtt_read(PCH_PP_ON_DELAYS);
 	if (!reg32) {
-		reg32 |= ((conf->gpu_panel_power_up_delay_ms * 10) & 0x1fff) << 16;
-		reg32 |= (conf->gpu_panel_power_backlight_on_delay_ms * 10) & 0x1fff;
+		reg32 |= ((panel_cfg->up_delay_ms * 10) & 0x1fff) << 16;
+		reg32 |= (panel_cfg->backlight_on_delay_ms * 10) & 0x1fff;
 		gtt_write(PCH_PP_ON_DELAYS, reg32);
 	}
 
 	/* Setup Panel Power Off Delays */
 	reg32 = gtt_read(PCH_PP_OFF_DELAYS);
 	if (!reg32) {
-		reg32 = ((conf->gpu_panel_power_down_delay_ms * 10) & 0x1fff) << 16;
-		reg32 |= (conf->gpu_panel_power_backlight_off_delay_ms * 10) & 0x1fff;
+		reg32 = ((panel_cfg->down_delay_ms * 10) & 0x1fff) << 16;
+		reg32 |= (panel_cfg->backlight_off_delay_ms * 10) & 0x1fff;
 		gtt_write(PCH_PP_OFF_DELAYS, reg32);
 	}
 
 	/* Setup Panel Power Cycle Delay */
-	if (conf->gpu_panel_power_cycle_delay_ms) {
+	if (panel_cfg->cycle_delay_ms) {
 		reg32 = gtt_read(PCH_PP_DIVISOR);
 		reg32 &= ~0x1f;
-		reg32 |= (DIV_ROUND_UP(conf->gpu_panel_power_cycle_delay_ms, 100) + 1) & 0x1f;
+		reg32 |= (DIV_ROUND_UP(panel_cfg->cycle_delay_ms, 100) + 1) & 0x1f;
 		gtt_write(PCH_PP_DIVISOR, reg32);
 	}
 
 	/* Enforce the PCH PWM function, as so does Linux.
 	   The CPU PWM controls are disabled after reset.  */
-	if (conf->gpu_pch_backlight_pwm_hz) {
+	if (panel_cfg->backlight_pwm_hz) {
 		/* Reference clock is either 24MHz or 135MHz. We can choose
 		   either a 16 or a 128 step increment. Use 16 if we would
 		   have less than 100 steps otherwise. */
@@ -290,7 +291,7 @@ static void gma_setup_panel(struct device *dev)
 		u32 south_chicken2;
 
 		south_chicken2 = gtt_read(SOUTH_CHICKEN2);
-		if (conf->gpu_pch_backlight_pwm_hz > hz_limit) {
+		if (panel_cfg->backlight_pwm_hz > hz_limit) {
 			pwm_increment = 16;
 			south_chicken2 |= LPT_PWM_GRANULARITY;
 		} else {
@@ -299,7 +300,7 @@ static void gma_setup_panel(struct device *dev)
 		}
 		gtt_write(SOUTH_CHICKEN2, south_chicken2);
 
-		pwm_period = refclock / pwm_increment / conf->gpu_pch_backlight_pwm_hz;
+		pwm_period = refclock / pwm_increment / panel_cfg->backlight_pwm_hz;
 		printk(BIOS_INFO,
 			"GMA: Setting backlight PWM frequency to %uMHz / %u / %u = %uHz\n",
 			refclock / MHz, pwm_increment, pwm_period,
@@ -309,7 +310,7 @@ static void gma_setup_panel(struct device *dev)
 		gtt_write(BLC_PWM_PCH_CTL2, pwm_period << 16 | pwm_period / 2);
 
 		gtt_write(BLC_PWM_PCH_CTL1,
-			(conf->gpu_pch_backlight_polarity == GPU_BACKLIGHT_POLARITY_LOW) << 29 |
+			(panel_cfg->backlight_polarity == GPU_BACKLIGHT_POLARITY_LOW) << 29 |
 			BLM_PCH_OVERRIDE_ENABLE | BLM_PCH_PWM_ENABLE);
 	}
 
diff --git a/src/soc/intel/apollolake/chip.h b/src/soc/intel/apollolake/chip.h
index 6e4c82d5a4..c94b7ef180 100644
--- a/src/soc/intel/apollolake/chip.h
+++ b/src/soc/intel/apollolake/chip.h
@@ -4,6 +4,7 @@
 #define _SOC_APOLLOLAKE_CHIP_H_
 
 #include <commonlib/helpers.h>
+#include <drivers/intel/gma/gma.h>
 #include <intelblocks/cfg.h>
 #include <intelblocks/gspi.h>
 #include <soc/gpe.h>
@@ -24,22 +25,6 @@ enum pnp_settings {
 	PNP_PERF_POWER,
 };
 
-struct soc_intel_apl_pp {
-	unsigned int up_delay_ms;
-	unsigned int down_delay_ms;
-	unsigned int cycle_delay_ms;
-	unsigned int backlight_on_delay_ms;
-	unsigned int backlight_off_delay_ms;
-};
-
-struct soc_intel_apl_blc {
-	unsigned int pwm_hz;
-	enum {
-		GPU_BACKLIGHT_POLARITY_HIGH = 0,
-		GPU_BACKLIGHT_POLARITY_LOW,
-	} polarity;
-};
-
 struct soc_intel_apollolake_config {
 
 	/* Common structure containing soc config data required by common code*/
@@ -48,12 +33,13 @@ struct soc_intel_apollolake_config {
 	/* Common struct containing power limits configuration info */
 	struct soc_power_limits_config power_limits_config;
 
-	/* IGD panel configuration */
-	struct soc_intel_apl_pp gpu_pp[2];
-	/* Second backlight control shares logic with other pins (aka. display
-	   utility pin). Be sure it's used for PWM before setting any value for
-	   the secondary controls. */
-	struct soc_intel_apl_blc gpu_blc[2];
+	/*
+	 * IGD panel configuration
+	 *
+	 * Second backlight control shares logic with other pins (aka. display utility pin).
+	 * Be sure it's used for PWM before setting any secondary backlight value.
+	 */
+	struct i915_gpu_panel_config panel_cfg[2];
 
 	/*
 	 * Mapping from PCIe root port to CLKREQ input on the SOC. The SOC has
diff --git a/src/soc/intel/apollolake/graphics.c b/src/soc/intel/apollolake/graphics.c
index 4144479fe8..c24ccdfee2 100644
--- a/src/soc/intel/apollolake/graphics.c
+++ b/src/soc/intel/apollolake/graphics.c
@@ -11,37 +11,37 @@
 #include "chip.h"
 
 static void graphics_configure_panelpower(
-		const struct soc_intel_apl_pp *const pp,
+		const struct i915_gpu_panel_config *const panel_cfg,
 		uint8_t *const mmio, const unsigned int panel_idx)
 {
 	const unsigned int offset = panel_idx * 0x100;
 	uint32_t reg32;
 
-	reg32 = (DIV_ROUND_UP(pp->cycle_delay_ms, 100) + 1) << 4 & 0x1f0;
+	reg32 = ((DIV_ROUND_UP(panel_cfg->cycle_delay_ms, 100) + 1) & 0x1f) << 4;
 	reg32 |= PANEL_POWER_RESET;
 	write32(mmio + PCH_PP_CONTROL + offset, reg32);
 
-	reg32 = pp->up_delay_ms * 10 << 16;
-	reg32 |= pp->backlight_on_delay_ms * 10;
+	reg32 = ((panel_cfg->up_delay_ms * 10) & 0x1fff) << 16;
+	reg32 |= (panel_cfg->backlight_on_delay_ms * 10) & 0x1fff;
 	write32(mmio + PCH_PP_ON_DELAYS + offset, reg32);
 
-	reg32 = pp->down_delay_ms * 10 << 16;
-	reg32 |= pp->backlight_off_delay_ms * 10;
+	reg32 = ((panel_cfg->down_delay_ms * 10) & 0x1fff) << 16;
+	reg32 |= (panel_cfg->backlight_off_delay_ms * 10) & 0x1fff;
 	write32(mmio + PCH_PP_OFF_DELAYS + offset, reg32);
 }
 
 static void graphics_configure_backlight(
-		const struct soc_intel_apl_blc *const blc,
+		const struct i915_gpu_panel_config *const panel_cfg,
 		uint8_t *const mmio, const unsigned int panel_idx)
 {
-	if (!blc->pwm_hz)
+	if (!panel_cfg->backlight_pwm_hz)
 		return;
 
-	const unsigned int pwm_period = 19200 * 1000 / blc->pwm_hz;
+	const unsigned int pwm_period = 19200 * 1000 / panel_cfg->backlight_pwm_hz;
 	write32(mmio + BXT_BLC_PWM_FREQ(panel_idx), pwm_period);
 	write32(mmio + BXT_BLC_PWM_DUTY(panel_idx), pwm_period / 2);
 	write32(mmio + BXT_BLC_PWM_CTL(panel_idx),
-		(blc->polarity ? BXT_BLC_PWM_POLARITY : 0));
+		panel_cfg->backlight_polarity ? BXT_BLC_PWM_POLARITY : 0);
 
 	/* Second backlight control uses display utility pin. */
 	if (panel_idx == 1) {
@@ -68,9 +68,9 @@ void graphics_soc_panel_init(struct device *const dev)
 		return;
 	mmio = (void *)(uintptr_t)mmio_res->base;
 
-	for (i = 0; i < ARRAY_SIZE(conf->gpu_pp); ++i)
-		graphics_configure_panelpower(&conf->gpu_pp[i], mmio, i);
+	for (i = 0; i < ARRAY_SIZE(conf->panel_cfg); ++i)
+		graphics_configure_panelpower(&conf->panel_cfg[i], mmio, i);
 
-	for (i = 0; i < ARRAY_SIZE(conf->gpu_blc); ++i)
-		graphics_configure_backlight(&conf->gpu_blc[i], mmio, i);
+	for (i = 0; i < ARRAY_SIZE(conf->panel_cfg); ++i)
+		graphics_configure_backlight(&conf->panel_cfg[i], mmio, i);
 }
diff --git a/src/soc/intel/broadwell/chip.h b/src/soc/intel/broadwell/chip.h
index b77cb71f70..9f6c58de47 100644
--- a/src/soc/intel/broadwell/chip.h
+++ b/src/soc/intel/broadwell/chip.h
@@ -3,7 +3,7 @@
 #ifndef _SOC_INTEL_BROADWELL_CHIP_H_
 #define _SOC_INTEL_BROADWELL_CHIP_H_
 
-#include <drivers/intel/gma/i915.h>
+#include <drivers/intel/gma/gma.h>
 #include <stdint.h>
 
 struct soc_intel_broadwell_config {
@@ -18,19 +18,8 @@ struct soc_intel_broadwell_config {
 	u8 gpu_dp_c_hotplug;
 	u8 gpu_dp_d_hotplug;
 
-	/* Panel power sequence timings */
-	u16 gpu_panel_power_cycle_delay_ms;
-	u16 gpu_panel_power_up_delay_ms;
-	u16 gpu_panel_power_down_delay_ms;
-	u16 gpu_panel_power_backlight_on_delay_ms;
-	u16 gpu_panel_power_backlight_off_delay_ms;
-
-	/* Panel backlight settings */
-	unsigned int gpu_pch_backlight_pwm_hz;
-	enum {
-		GPU_BACKLIGHT_POLARITY_HIGH = 0,
-		GPU_BACKLIGHT_POLARITY_LOW,
-	} gpu_pch_backlight_polarity;
+	/* IGD panel configuration */
+	struct i915_gpu_panel_config panel_cfg;
 
 	/*
 	 * Graphics CD Clock Frequency
diff --git a/src/soc/intel/broadwell/gma.c b/src/soc/intel/broadwell/gma.c
index 9866ed3b39..bbb6678b75 100644
--- a/src/soc/intel/broadwell/gma.c
+++ b/src/soc/intel/broadwell/gma.c
@@ -285,6 +285,7 @@ int gtt_poll(u32 reg, u32 mask, u32 value)
 static void gma_setup_panel(struct device *dev)
 {
 	config_t *conf = config_of(dev);
+	const struct i915_gpu_panel_config *panel_cfg = &conf->panel_cfg;
 	u32 reg32;
 
 	/* Setup Digital Port Hotplug */
@@ -299,30 +300,30 @@ static void gma_setup_panel(struct device *dev)
 	/* Setup Panel Power On Delays */
 	reg32 = gtt_read(PCH_PP_ON_DELAYS);
 	if (!reg32) {
-		reg32 |= ((conf->gpu_panel_power_up_delay_ms * 10) & 0x1fff) << 16;
-		reg32 |= (conf->gpu_panel_power_backlight_on_delay_ms * 10) & 0x1fff;
+		reg32 |= ((panel_cfg->up_delay_ms * 10) & 0x1fff) << 16;
+		reg32 |= (panel_cfg->backlight_on_delay_ms * 10) & 0x1fff;
 		gtt_write(PCH_PP_ON_DELAYS, reg32);
 	}
 
 	/* Setup Panel Power Off Delays */
 	reg32 = gtt_read(PCH_PP_OFF_DELAYS);
 	if (!reg32) {
-		reg32 = ((conf->gpu_panel_power_down_delay_ms * 10) & 0x1fff) << 16;
-		reg32 |= (conf->gpu_panel_power_backlight_off_delay_ms * 10) & 0x1fff;
+		reg32 = ((panel_cfg->down_delay_ms * 10) & 0x1fff) << 16;
+		reg32 |= (panel_cfg->backlight_off_delay_ms * 10) & 0x1fff;
 		gtt_write(PCH_PP_OFF_DELAYS, reg32);
 	}
 
 	/* Setup Panel Power Cycle Delay */
-	if (conf->gpu_panel_power_cycle_delay_ms) {
+	if (panel_cfg->cycle_delay_ms) {
 		reg32 = gtt_read(PCH_PP_DIVISOR);
 		reg32 &= ~0x1f;
-		reg32 |= (DIV_ROUND_UP(conf->gpu_panel_power_cycle_delay_ms, 100) + 1) & 0x1f;
+		reg32 |= (DIV_ROUND_UP(panel_cfg->cycle_delay_ms, 100) + 1) & 0x1f;
 		gtt_write(PCH_PP_DIVISOR, reg32);
 	}
 
 	/* So far all devices seem to use the PCH PWM function.
 	   The CPU PWM registers are all zero after reset.      */
-	if (conf->gpu_pch_backlight_pwm_hz) {
+	if (panel_cfg->backlight_pwm_hz) {
 		/* For Lynx Point-LP:
 		   Reference clock is 24MHz. We can choose either a 16
 		   or a 128 step increment. Use 16 if we would have less
@@ -333,7 +334,7 @@ static void gma_setup_panel(struct device *dev)
 		u32 south_chicken2;
 
 		south_chicken2 = gtt_read(SOUTH_CHICKEN2);
-		if (conf->gpu_pch_backlight_pwm_hz > hz_limit) {
+		if (panel_cfg->backlight_pwm_hz > hz_limit) {
 			pwm_increment = 16;
 			south_chicken2 |= 1 << 5;
 		} else {
@@ -342,7 +343,7 @@ static void gma_setup_panel(struct device *dev)
 		}
 		gtt_write(SOUTH_CHICKEN2, south_chicken2);
 
-		pwm_period = refclock / pwm_increment / conf->gpu_pch_backlight_pwm_hz;
+		pwm_period = refclock / pwm_increment / panel_cfg->backlight_pwm_hz;
 		printk(BIOS_INFO,
 			"GMA: Setting backlight PWM frequency to %uMHz / %u / %u = %uHz\n",
 			refclock / MHz, pwm_increment, pwm_period,
@@ -352,7 +353,7 @@ static void gma_setup_panel(struct device *dev)
 		gtt_write(BLC_PWM_PCH_CTL2, pwm_period << 16 | pwm_period / 2);
 
 		gtt_write(BLC_PWM_PCH_CTL1,
-			(conf->gpu_pch_backlight_polarity == GPU_BACKLIGHT_POLARITY_LOW) << 29 |
+			(panel_cfg->backlight_polarity == GPU_BACKLIGHT_POLARITY_LOW) << 29 |
 			BLM_PCH_OVERRIDE_ENABLE | BLM_PCH_PWM_ENABLE);
 	}
 }
diff --git a/src/soc/intel/skylake/chip.h b/src/soc/intel/skylake/chip.h
index 7d9d93460c..027a2e29e4 100644
--- a/src/soc/intel/skylake/chip.h
+++ b/src/soc/intel/skylake/chip.h
@@ -6,7 +6,7 @@
 #include <acpi/acpi_device.h>
 #include <device/i2c_simple.h>
 #include <drivers/i2c/designware/dw_i2c.h>
-#include <drivers/intel/gma/i915.h>
+#include <drivers/intel/gma/gma.h>
 #include <intelblocks/cfg.h>
 #include <intelblocks/gspi.h>
 #include <intelblocks/lpc_lib.h>
@@ -37,16 +37,7 @@ struct soc_intel_skylake_config {
 	struct soc_power_limits_config power_limits_config;
 
 	/* IGD panel configuration */
-	unsigned int gpu_pp_up_delay_ms;
-	unsigned int gpu_pp_down_delay_ms;
-	unsigned int gpu_pp_cycle_delay_ms;
-	unsigned int gpu_pp_backlight_on_delay_ms;
-	unsigned int gpu_pp_backlight_off_delay_ms;
-	unsigned int gpu_pch_backlight_pwm_hz;
-	enum {
-		GPU_BACKLIGHT_POLARITY_HIGH = 0,
-		GPU_BACKLIGHT_POLARITY_LOW,
-	} gpu_pch_backlight_polarity;
+	struct i915_gpu_panel_config panel_cfg;
 
 	/* Gpio group routed to each dword of the GPE0 block. Values are
 	 * of the form GPP_[A:G] or GPD. */
diff --git a/src/soc/intel/skylake/graphics.c b/src/soc/intel/skylake/graphics.c
index 46dc9dbfab..d41c4aa644 100644
--- a/src/soc/intel/skylake/graphics.c
+++ b/src/soc/intel/skylake/graphics.c
@@ -15,6 +15,7 @@
 void graphics_soc_panel_init(struct device *dev)
 {
 	struct soc_intel_skylake_config *conf = config_of(dev);
+	const struct i915_gpu_panel_config *panel_cfg;
 	struct resource *mmio_res;
 	uint8_t *base;
 	u32 reg32;
@@ -22,27 +23,29 @@ void graphics_soc_panel_init(struct device *dev)
 	if (!conf)
 		return;
 
+	panel_cfg = &conf->panel_cfg;
+
 	mmio_res = find_resource(dev, PCI_BASE_ADDRESS_0);
 	if (!mmio_res || !mmio_res->base)
 		return;
 	base = (void *)(uintptr_t)mmio_res->base;
 
-	reg32 = conf->gpu_pp_up_delay_ms * 10 << 16;
-	reg32 |= conf->gpu_pp_backlight_on_delay_ms * 10;
+	reg32 = ((panel_cfg->up_delay_ms * 10) & 0x1fff) << 16;
+	reg32 |= (panel_cfg->backlight_on_delay_ms * 10) & 0x1fff;
 	write32(base + PCH_PP_ON_DELAYS, reg32);
 
-	reg32 = conf->gpu_pp_down_delay_ms * 10 << 16;
-	reg32 |= conf->gpu_pp_backlight_off_delay_ms * 10;
+	reg32 = ((panel_cfg->down_delay_ms * 10) & 0x1fff) << 16;
+	reg32 |= (panel_cfg->backlight_off_delay_ms * 10) & 0x1fff;
 	write32(base + PCH_PP_OFF_DELAYS, reg32);
 
 	reg32 = read32(base + PCH_PP_DIVISOR);
 	reg32 &= ~0x1f;
-	reg32 |= (DIV_ROUND_UP(conf->gpu_pp_cycle_delay_ms, 100) + 1) & 0x1f;
+	reg32 |= (DIV_ROUND_UP(panel_cfg->cycle_delay_ms, 100) + 1) & 0x1f;
 	write32(base + PCH_PP_DIVISOR, reg32);
 
 	/* So far all devices seem to use the PCH PWM function.
 	   The CPU PWM registers are all zero after reset.      */
-	if (conf->gpu_pch_backlight_pwm_hz) {
+	if (panel_cfg->backlight_pwm_hz) {
 		/* Reference clock is 24MHz. We can choose either a 16
 		   or a 128 step increment. Use 16 if we would have less
 		   than 100 steps otherwise. */
@@ -51,7 +54,7 @@ void graphics_soc_panel_init(struct device *dev)
 		u32 south_chicken1;
 
 		south_chicken1 = read32(base + SOUTH_CHICKEN1);
-		if (conf->gpu_pch_backlight_pwm_hz > hz_limit) {
+		if (panel_cfg->backlight_pwm_hz > hz_limit) {
 			pwm_increment = 16;
 			south_chicken1 &= ~1;
 		} else {
@@ -60,15 +63,12 @@ void graphics_soc_panel_init(struct device *dev)
 		}
 		write32(base + SOUTH_CHICKEN1, south_chicken1);
 
-		pwm_period = 24 * 1000 * 1000 / pwm_increment
-				/ conf->gpu_pch_backlight_pwm_hz;
+		pwm_period = 24 * 1000 * 1000 / pwm_increment / panel_cfg->backlight_pwm_hz;
 		/* Start with a 50% duty cycle. */
-		write32(base + BLC_PWM_PCH_CTL2,
-			pwm_period << 16 | pwm_period / 2);
+		write32(base + BLC_PWM_PCH_CTL2, pwm_period << 16 | pwm_period / 2);
 
 		write32(base + BLC_PWM_PCH_CTL1,
-			!!conf->gpu_pch_backlight_polarity << 29 |
-			BLM_PCH_PWM_ENABLE);
+			!!panel_cfg->backlight_polarity << 29 | BLM_PCH_PWM_ENABLE);
 	}
 }