summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
authorRonald G. Minnich <rminnich@gmail.com>2004-10-06 17:19:49 +0000
committerRonald G. Minnich <rminnich@gmail.com>2004-10-06 17:19:49 +0000
commit4fa89208a16e1e2052fff315c76f8f3f07459571 (patch)
treed7a376040d0f8987832c8e404684c376b4b2fa78 /src
parented9f18d545ffa6e4604eacbf1ce8c68913378ab8 (diff)
f'ing thing still won't work.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1654 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src')
-rw-r--r--src/northbridge/intel/i855pm/raminit.c355
1 files changed, 171 insertions, 184 deletions
diff --git a/src/northbridge/intel/i855pm/raminit.c b/src/northbridge/intel/i855pm/raminit.c
index b95bf48588..5a5992268d 100644
--- a/src/northbridge/intel/i855pm/raminit.c
+++ b/src/northbridge/intel/i855pm/raminit.c
@@ -19,8 +19,8 @@
/* converted to C 6/2004 yhlu */
#define DEBUG_RAM_CONFIG 1
-#define ASM_CONSOLE_LOGLEVEL 10
-#define dumpnorth() dump_pci_device(PCI_DEV(0, 0, 0))
+#define ASM_CONSOLE_LOGLEVEL 9
+#define dumpnorth() dump_pci_device(PCI_DEV(0, 0, 1))
/* DDR DIMM Mode register Definitions */
@@ -46,6 +46,7 @@
//#define CAS_LATENCY CAS_2_5
//#define CAS_LATENCY CAS_1_5
+/* WOW! this could be bad! sets casl to 2 without checking! */
#define MRS_VALUE (MODE_NORM | CAS_LATENCY | BURST_TYPE | BURST_LENGTH)
#define EMRS_VALUE 0x000
@@ -65,7 +66,7 @@ static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t v
uint8_t byte;
int i;
uint32_t result;
-#if DEBUG_RAM_CONFIG >= 2
+#if DEBUG_RAM_CONFIG >=2
print_debug("P:");
print_debug_hex8(value);
print_debug("\r\n");
@@ -73,12 +74,19 @@ static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t v
/* %ecx - initial address to read from */
/* Compute the offset */
dword = value >> 16;
- for(i=0;i<8;i++) {
+ // for(i=0;i<4;i++) {
+ for(i=0;i<1;i++) {
/* Set the ram command */
- byte = pci_read_config8(ctrl->d0, 0x7c);
+ byte = pci_read_config8(ctrl->d0, 0x70);
byte &= 0x8f;
byte |= (uint8_t)(value & 0xff);
- pci_write_config8(ctrl->d0, 0x7c, byte);
+#if DEBUG_RAM_CONFIG
+ print_debug("R:");
+ print_debug_hex8(byte);
+ print_debug("\r\n");
+#endif
+
+ pci_write_config8(ctrl->d0, 0x70, byte);
/* Assert the command to the memory */
#if DEBUG_RAM_CONFIG >= 2
@@ -87,17 +95,19 @@ static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t v
print_debug("\r\n");
#endif
- result = read32(dword);
-
+ result = read32(dword);
+
+#if DEBUG_RAM_CONFIG
+ print_debug("Done\r\n");
+#endif
/* Go to the next base address */
- dword += 0x04000000;
+ dword += 0x0200000;
}
/* The command has been sent to all dimms so get out */
}
-
static inline void RAM_CMD(const struct mem_controller *ctrl, uint32_t command, uint32_t offset) {
uint32_t value = ((offset) << (MD_SHIFT + 16))|((command << 4) & 0x70) ;
do_ram_command(ctrl, value);
@@ -116,10 +126,10 @@ static inline void ram_mrs(const struct mem_controller *ctrl, uint32_t value){
/* Read the cas latency setting */
uint8_t byte;
uint32_t dword;
- byte = pci_read_config8(ctrl->d0, 0x78);
+ byte = pci_read_config8(ctrl->d0, 0x60);
/* Transform it into the form expected by SDRAM */
- dword = ram_cas_latency[(byte>>4) & 3];
-
+ dword = ram_cas_latency[(byte>>5) & 1];
+#warning RAM_MRS -- using BROKEN hard-wired CAS 2.0. FIX ME SOON
value |= (dword<<(16+MD_SHIFT));
value |= (MODE_NORM | BURST_TYPE | BURST_LENGTH) << (16+MD_SHIFT);
@@ -131,10 +141,10 @@ static inline void ram_mrs(const struct mem_controller *ctrl, uint32_t value){
static void RAM_NORMAL(const struct mem_controller *ctrl) {
uint8_t byte;
- byte = pci_read_config8(ctrl->d0, 0x7c);
+ byte = pci_read_config8(ctrl->d0, 0x70);
byte &= 0x8f;
byte |= (RAM_COMMAND_NORMAL << 4);
- pci_write_config8(ctrl->d0, 0x7c, byte);
+ pci_write_config8(ctrl->d0, 0x70, byte);
}
static void RAM_RESET_DDR_PTR(const struct mem_controller *ctrl) {
@@ -150,9 +160,9 @@ static void RAM_RESET_DDR_PTR(const struct mem_controller *ctrl) {
static void ENABLE_REFRESH(const struct mem_controller *ctrl)
{
uint32_t dword;
- dword = pci_read_config32(ctrl->d0, 0x7c);
+ dword = pci_read_config32(ctrl->d0, 0x70);
dword |= (1 << 29);
- pci_write_config32(ctrl->d0, 0x7c, dword);
+ pci_write_config32(ctrl->d0, 0x70, dword);
}
/*
@@ -279,8 +289,8 @@ static const long register_values[] = {
* 10 == Write Only (Writes to DRAM, Reads to memory mapped I/O space)
* 11 == Normal (All Access go to DRAM)
*/
- 0x90, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24),
- 0x94, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24),
+ // 0x90, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24),
+ //0x94, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24),
/* FIXME why was I attempting to set a reserved bit? */
@@ -330,6 +340,8 @@ static const long register_values[] = {
* [00:00] DRAM type --hardwired to 1 to indicate DDR
*/
0x70, 0xdf0f6c7f, 0,
+ /* undocumnted shit */
+ 0x80, 0, 0xaf0031,
};
@@ -347,25 +359,6 @@ static const long register_values[] = {
* Which are a triple of configuration regiser, mask, and value.
*
*/
-/* from 1M or 512K */
-#define RCOMP_MMIO 0x100000
-
- /* DDR RECOMP table */
-
-static const long ddr_rcomp_1[] = {
- 0x44332211, 0xc9776655, 0xffffffff, 0xffffffff,
- 0x22111111, 0x55444332, 0xfffca876, 0xffffffff,
-};
-static const long ddr_rcomp_2[] = {
- 0x00000000, 0x76543210, 0xffffeca8, 0xffffffff,
- 0x21000000, 0xa8765432, 0xffffffec, 0xffffffff,
-};
-static const long ddr_rcomp_3[] = {
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x88888888, 0x88888888, 0x88888888, 0x88888888,
-};
-
-#define rcomp_init_str "Setting RCOMP registers.\r\n"
static void write_8dwords(uint32_t src_addr, uint32_t dst_addr) {
int i;
@@ -382,90 +375,6 @@ static void write_8dwords(uint32_t src_addr, uint32_t dst_addr) {
//#define SLOW_DOWN_IO inb(0x80);
#define SLOW_DOWN_IO udelay(40);
-static void ram_set_rcomp_regs(const struct mem_controller *ctrl) {
- uint32_t dword;
-#if DEBUG_RAM_CONFIG
- print_debug(rcomp_init_str);
-#endif
-
- /*enable access to the rcomp bar */
- /* for e7501 they also set bit 31 ... */
- dword = pci_read_config32(ctrl->d0, 0x0f4);
- dword |= 1<<22;
- pci_write_config32(ctrl->d0, 0x0f4, dword);
-
-
- /* Set the MMIO address to 512K */
- pci_write_config32(ctrl->d0, 0x14, RCOMP_MMIO);
-
- dword = read32(RCOMP_MMIO + 0x20);
- dword |= (1<<9);
- write32(RCOMP_MMIO + 0x20, dword);
-
-#ifdef NOTNOW
- /* Begin to write the RCOMP registers */
-
- write8(RCOMP_MMIO + 0x2c, 0xff);
- write32(RCOMP_MMIO + 0x30, 0x01040444);
- write8(RCOMP_MMIO + 0x34, 0x04);
- write32(RCOMP_MMIO + 0x40, 0);
- write16(RCOMP_MMIO + 0x44, 0);
- write16(RCOMP_MMIO + 0x48, 0);
- write16(RCOMP_MMIO + 0x50, 0);
- write_8dwords((uint32_t)ddr_rcomp_1, RCOMP_MMIO + 0x60);
- write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x80);
- write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0xa0);
- write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x140);
- write_8dwords((uint32_t)ddr_rcomp_2, RCOMP_MMIO + 0x1c0);
- write_8dwords((uint32_t)ddr_rcomp_3, RCOMP_MMIO + 0x180);
-
-#if 0 /* Print the RCOMP registers */
- movl $RCOMP_MMIO, %ecx
-1: movl %ecx, %eax
- andb $0x0f, %al
- jnz 2f
- CONSOLE_INFO_TX_CHAR($'\r')
- CONSOLE_INFO_TX_CHAR($'\n')
- CONSOLE_INFO_TX_HEX32(%ecx)
- CONSOLE_INFO_TX_CHAR($' ')
- CONSOLE_INFO_TX_CHAR($'-')
- CONSOLE_INFO_TX_CHAR($' ')
-2: movl (%ecx), %eax
- CONSOLE_INFO_TX_HEX32(%eax)
- CONSOLE_INFO_TX_CHAR($' ')
- addl $4, %ecx
- cmpl $(RCOMP_MMIO + 0x1e0), %ecx
- jnz 1b
- CONSOLE_INFO_TX_CHAR($'\r')
- CONSOLE_INFO_TX_CHAR($'\n')
-#endif
-
- dword = read32(RCOMP_MMIO + 0x20);
- dword &= ~(3);
- dword |= 1;
- write32(RCOMP_MMIO + 0x20, dword);
-
- /* Wait 40 usec */
- SLOW_DOWN_IO;
-
- /* unblock updates */
- dword = read32(RCOMP_MMIO + 0x20);
- dword &= ~(1<<9);
- write32(RCOMP_MMIO+0x20, dword);
- dword |= (1<<8);
- write32(RCOMP_MMIO+0x20, dword);
- dword &= ~(1<<8);
- write32(RCOMP_MMIO+0x20, dword);
-
- /* Wait 40 usec */
- SLOW_DOWN_IO;
-#endif
- /*disable access to the rcomp bar */
- dword = pci_read_config32(ctrl->d0, 0x0f4);
- dword &= ~(1<<22);
- pci_write_config32(ctrl->d0, 0x0f4, dword);
-
-}
static void ram_set_d0f0_regs(const struct mem_controller *ctrl) {
#if DEBUG_RAM_CONFIG
@@ -494,7 +403,6 @@ static void ram_set_d0f0_regs(const struct mem_controller *ctrl) {
#endif
}
static void sdram_set_registers(const struct mem_controller *ctrl){
- // ram_set_rcomp_regs(ctrl);
ram_set_d0f0_regs(ctrl);
}
@@ -677,6 +585,23 @@ static struct dimm_size spd_get_dimm_size(unsigned device)
* a multiple of 4MB. The way we do it now we can size both
* sides of an assymetric dimm.
*/
+ /* the hell with that! just use byte 31 -- rgm */
+ value = spd_read_byte(device, 31); /* size * 4 MB */
+ value = log2(value);
+ /* this is in 4 MB chunks, or 32 MBits chunks.
+ * log base 2 of 32 Mbits is log2 of (32*1024*1024) is 25
+ * so add 25
+ */
+ value += 25;
+ sz.side1 = value;
+ sz.side2 = 0;
+#if DEBUG_RAM_CONFIG
+ print_debug("returned size log 2 in bits is :");
+ print_debug_hex32(value);
+ print_debug("\r\n");
+#endif
+ goto out;
+#if 0
value = spd_read_byte(device, 3); /* rows */
if (value < 0) goto hw_err;
// if ((value & 0xf) == 0) goto val_err;
@@ -727,6 +652,7 @@ static struct dimm_size spd_get_dimm_size(unsigned device)
sz.side2 += ((value >> 4) & 0x0f); /* Add in columsn on side 2 */
goto out;
+#endif
val_err:
die("Bad SPD value\r\n");
/* If an hw_error occurs report that I have no memory */
@@ -1249,7 +1175,7 @@ static const uint16_t cas_latency_80_4dimms[] = {
static const uint8_t cas_latency_78[] = {
- DRT_CAS_1_5, DRT_CAS_2_0, DRT_CAS_2_5
+ DRT_CAS_2_0, DRT_CAS_2_5
};
static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mask) {
@@ -1376,6 +1302,13 @@ static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mas
}
+static const unsigned int bustimings[8] = {
+ /* first four are for GM part */
+ 266, 200, 200, -1,
+ /* and then the GME part */
+ 266, 200, 200, 333
+};
+
static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mask) {
/* Walk through all dimms and find the interesection of the
* supported dram timings.
@@ -1385,8 +1318,51 @@ static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mas
uint32_t dword;
int value;
+ /* well, shit. Intel has not seen fit to document the observed
+ * setting for these bits. On my chipset it is 3 right now, and
+ * that's not in the table documented for this chip.
+ * What a shame. We will assume 133 mhz I guess? not sure.
+ * also they say in one place it is two bits and in another
+ * they say it is 3 bits! we'll assume two bits, that's
+ * the only one that makes sense.
+ */
+ uint32_t rambusfrequency;
+ uint32_t ramindex;
+
+ /* what kind of chip is it? */
+ /* only bit that really matters is high order bit ... */
+ /* here is a problem with the memory controller struct ...
+ * ram control is spread across d0/d1 on this part!
+ */
+ ramindex = pci_read_config8(PCI_DEV(0,0,0), 0x44);
+ ramindex >>= 5;
+
+ /* compute the index into the table. Use the type of chip
+ * as the high order bit and the 0:0.3:c0 & 7 as the low
+ * order four bits.
+ */
+
+ ramindex |= pci_read_config8(PCI_DEV(0,0,3), 0xc0) & 7;
+ /* we now have an index into the clock rate table ... */
+
+ rambusfrequency = bustimings[ramindex];
+
/* Read the inititial state */
dword = pci_read_config32(ctrl->d0, 0x60);
+#if DEBUG_RAM_CONFIG >= 10
+ print_debug("spd_detect_dimms: bus timing index: ");
+ print_debug_hex32(ramindex);
+ print_debug(" and speed ");
+ print_debug_hex32(rambusfrequency);
+ print_debug("\r\n");
+#endif
+
+ /* for now, since we are on deadline, set to "known good" and
+ * fix later.
+ */
+ pci_write_config32(ctrl->d0, 0x60, 0x2a004425);
+ return dimm_mask;
+
#if 0
# Intel clears top bit here, should we?
# No the default is on and for normal timming it should be on. Tom Z
@@ -1394,7 +1370,7 @@ static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mas
#endif
-HERE. WHat's the frequency kenneth?
+// HERE. WHat's the frequency kenneth?
for(i = 0; i < DIMM_SOCKETS; i++) {
if (!(dimm_mask & (1 << i))) {
continue;
@@ -1515,47 +1491,49 @@ static uint32_t set_dimm_size(const struct mem_controller *ctrl, struct dimm_siz
uint32_t dch;
uint8_t byte;
+ /* I think size2 is always 0 ... */
/* Double the size if we are using dual channel memory */
-// if (is_dual_channel(ctrl)) {
- /* Since I have 2 identical channels double the sizes */
- sz.side1++ ;
- sz.side2++;
-// }
-
if (sz.side1 != sz.side2) {
sz.side2 = 0;
}
-
- /* Make certain side1 of the dimm is at least 64MB */
- if (sz.side1 >= (25 + 4)) {
- memsz += (1 << (sz.side1 - (25 + 4)) ) ;
- }
+
+
+ /* Make certain side1 of the dimm is at least 32MB */
+ /* This 28 is weird.
+ * sz.size1 is log2 size in bits.
+ * so what's 28? So think of it as this:
+ * in log2 space: 10 + 10 + 8, i.e. 1024 * 1024 * 256 or
+ * 256 Mbits, or 32 Mbytes.
+ */
+ /* this is from the e7500 code and it's just wrong for small dimes (< 64 MB)
+ * However, realistically, this case will never happen! the dimms are all bigger ...
+ * so skip the conditional completely.
+ * if (sz.side1 >= (28)) { }
+ */
+ memsz += (1 << (sz.side1 - (28)) ) ;
+
/* Write the size of side 1 of the dimm */
+ #if DEBUG_RAM_CONFIG
+ print_debug("Write size ");
+ print_debug_hex8(memsz);
+ print_debug(" to ");
+ print_debug_hex8(0x40 + index);
+ print_debug("\r\n");
+#endif
byte = memsz;
- pci_write_config8(ctrl->d0, 0x60+(index<<1), byte);
+ pci_write_config8(ctrl->d0, 0x40+index, byte);
- /* Make certain side2 of the dimm is at least 64MB */
- if (sz.side2 >= (25 + 4)) {
- memsz += (1 << (sz.side2 - (25 + 4)) ) ;
- }
-
- /* Write the size of side 2 of the dimm */
- byte = memsz;
- pci_write_config8(ctrl->d0, 0x61+(index<<1), byte);
-
/* now, fill in DRBs where no physical slot exists */
for(i=index+1;i<4;i++) {
- pci_write_config8(ctrl->d0, 0x60+(i<<1),byte);
- pci_write_config8(ctrl->d0, 0x61+(i<<1),byte);
-
+ pci_write_config8(ctrl->d0, 0x40+i, byte);
}
return memsz;
}
-/* LAST_DRB_SLOT is a constant for any E7500 board */
-#define LAST_DRB_SLOT 0x67
+
+#define LAST_DRB_SLOT 0x43
static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask)
{
@@ -1582,6 +1560,7 @@ static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask)
}
memsz = set_dimm_size(ctrl, sz, memsz, i);
}
+#if 0
/* For now hardset everything at 128MB boundaries */
/* %ebp has the ram size in multiples of 64MB */
// cmpl $0, %ebp /* test if there is no mem - smbus went bad */
@@ -1613,6 +1592,7 @@ static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask)
pci_write_config16(ctrl->d0, 0xc8, word);
}
+#endif
return dimm_mask;
}
@@ -1643,19 +1623,25 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) {
if (dimm_mask < 0)
goto hw_spd_err;
+
+ /* skip for now until we just get "known good" up
dimm_mask = spd_set_cas_latency(ctrl,dimm_mask);
- dump_pci_device(PCI_DEV(0,0,1));
+ */
+
if (dimm_mask < 0)
goto hw_spd_err;
dimm_mask = spd_set_dram_timing(ctrl,dimm_mask);
if (dimm_mask < 0)
goto hw_spd_err;
+
#if DEBUG_RAM_CONFIG
print_debug(spd_post_init);
#endif
//moved from dram_post_init
spd_set_ram_size(ctrl, dimm_mask);
- return;
+ dump_pci_device(PCI_DEV(0,0,1));
+ return;
+
hw_spd_err:
/* Unrecoverable error reading SPD data */
print_err("SPD error - reset\r\n");
@@ -1754,42 +1740,26 @@ static void dram_finish(const struct mem_controller *ctrl)
uint32_t dword;
uint8_t byte;
/* Test to see if ECC support is enabled */
- dword = pci_read_config32(ctrl->d0, 0x7c);
+ dword = pci_read_config32(ctrl->d0, 0x70);
dword >>=20;
- dword &=3;
- if(dword == 2) {
+ dword &=1;
+ if(dword == 1) {
#if DEBUG_RAM_CONFIG
print_debug(ecc_pre_init);
#endif
- /* Initialize ECC bits , use ECC zero mode (new to 7501)*/
- pci_write_config8(ctrl->d0, 0x52, 0x06);
- pci_write_config8(ctrl->d0, 0x52, 0x07);
- do {
- byte = pci_read_config8(ctrl->d0, 0x52);
-
- } while ( (byte & 0x08 ) == 0);
-
- pci_write_config8(ctrl->d0, 0x52, byte & 0xfc);
#if DEBUG_RAM_CONFIG
print_debug(ecc_post_init);
#endif
-
- /* Clear the ECC error bits */
#if 0
- pci_write_config8(ctrl->d0f1, 0x80, 0x03); /* dev 0, function 1, offset 80 */
- pci_write_config8(ctrl->d0f1, 0x82, 0x03); /* dev 0, function 1, offset 82 */
-
- pci_write_config32(ctrl->d0f1, 0x40, 1<<18); /* clear dev 0, function 1, offset 40; bit 18 by writing a 1 to it */
- pci_write_config32(ctrl->d0f1, 0x44, 1<<18); /* clear dev 0, function 1, offset 44; bit 18 by writing a 1 to it */
-#endif
- pci_write_config8(ctrl->d0, 0x52, 0x0d);
- }
-
+ /* Clear the ECC error bits */
+ /*
dword = pci_read_config32(ctrl->d0, 0x7c); /* FCS_EN */
dword |= (1<<17);
pci_write_config32(ctrl->d0, 0x7c, dword);
-
+*/
+#endif
+ }
#if DEBUG_RAM_CONFIG
dumpnorth();
@@ -1863,15 +1833,23 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
int i;
uint32_t mchtst;
/* 1 & 2 Power up and start clocks */
- /* arg! the parts are memory mapped! For now, just grab address 0xc0000000 as the base, since I want to use
- * constants, not variables, for this.
+ /* let the games begin. More undocumented shit, so we'll just set it
+ * as intel sets it
*/
- mchtst = pci_read_config32(ctrl->d0, 0xf4);
- mchtst |= (1 << 22);
- pci_write_config32(ctrl->d0, 0xf4, mchtst);
-
+ mchtst = pci_read_config32(ctrl->d0, 0x68);
#if DEBUG_RAM_CONFIG
print_debug(ram_enable_1);
+ print_debug_hex32(mchtst);
+ dumpnorth();
+#endif
+ /*
+ mchtst = 0x10f10038;
+ pci_write_config32(ctrl->d0, 0x68, mchtst);
+ * can't find a ram power register ...
+ */
+
+#if DEBUG_RAM_CONFIG
+
print_debug(ram_enable_2);
#endif
@@ -1882,15 +1860,17 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
/* 3. Apply NOP */
#if DEBUG_RAM_CONFIG
+ dump_pci_device(PCI_DEV(0, 0, 0)) ;
print_debug(ram_enable_3);
#endif
RAM_NOP(ctrl);
EXTRA_DELAY
-
+#define DEBUG_RAM_CONFIG 0
/* 4 Precharge all */
#if DEBUG_RAM_CONFIG
print_debug(ram_enable_4);
#endif
+#define DEBUG_RAM_CONFIG 0
RAM_PRECHARGE(ctrl);
EXTRA_DELAY
@@ -1975,6 +1955,13 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
//SPECIAL_FINISHUP();
dram_finish(ctrl);
+ { char *c = (char *) 0;
+ *c = 'a';
+ print_debug("Test: ");
+ print_debug_hex8(*c);
+ print_debug("\r\n");
+ }
+
}