diff options
| author | Appukuttan V K <appukuttan.vk@intel.com> | 2024-05-15 23:12:44 +0530 |
|---|---|---|
| committer | Subrata Banik <subratabanik@google.com> | 2024-05-30 13:22:10 +0000 |
| commit | e527e954be3c3c2764f58ac40e160c922b584ab7 (patch) | |
| tree | c079e090970728da0cc5e9de77c2dd7b06669915 /src/vendorcode | |
| parent | acd0e1a5b856536e8d26d0dd3743d7a3917151fa (diff) | |
vc/intel/fsp/mtl: Add x86_64 FSP V3471.91 headers
This commit introduces new header files of V3471.91 for the x86_64
architecture in the fsp2_0/meteorlake directory. FSP2.4 brings FSP
64-bits support and the soc Kconfig file has been updated to select
this new header path when FSP2.4 is in use.
BUG=b:329034258
TEST=Verified x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: Ib41b57e794311db729ac65a968f562aa127e86c3
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Diffstat (limited to 'src/vendorcode')
6 files changed, 6941 insertions, 0 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FirmwareVersionInfo.h b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FirmwareVersionInfo.h new file mode 100644 index 0000000000..d3776cc8a3 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FirmwareVersionInfo.h @@ -0,0 +1,55 @@ +/** @file + Intel Firmware Version Info (FVI) related definitions. + + @todo update document/spec reference + + Copyright (c) 2016, Intel Corporation. All rights reserved.<BR> + SPDX-License-Identifier: BSD-2-Clause-Patent + +@par Specification Reference: + System Management BIOS (SMBIOS) Reference Specification v3.0.0 dated 2015-Feb-12 + http://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.0.0.pdf + +**/ + +#ifndef __FIRMWARE_VERSION_INFO_H__ +#define __FIRMWARE_VERSION_INFO_H__ + +#include <IndustryStandard/SmBios.h> + +#define INTEL_FIRMWARE_VERSION_INFO_GROUP_NAME "Firmware Version Info" +#define INTEL_FVI_SMBIOS_TYPE 0xDD + +#pragma pack(1) + +/// +/// Firmware Version Structure +/// +typedef struct { + UINT8 MajorVersion; + UINT8 MinorVersion; + UINT8 Revision; + UINT16 BuildNumber; +} INTEL_FIRMWARE_VERSION; + +/// +/// Firmware Version Info (FVI) Structure +/// +typedef struct { + SMBIOS_TABLE_STRING ComponentName; ///< String Index of Component Name + SMBIOS_TABLE_STRING VersionString; ///< String Index of Version String + INTEL_FIRMWARE_VERSION Version; ///< Firmware version +} INTEL_FIRMWARE_VERSION_INFO; + +/// +/// SMBIOS OEM Type Intel Firmware Version Info (FVI) Structure +/// +typedef struct { + SMBIOS_STRUCTURE Header; ///< SMBIOS structure header + UINT8 Count; ///< Number of FVI entries in this structure + INTEL_FIRMWARE_VERSION_INFO Fvi[1]; ///< FVI structure(s) +} SMBIOS_TABLE_TYPE_OEM_INTEL_FVI; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspProducerDataHeader.h b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspProducerDataHeader.h new file mode 100644 index 0000000000..b7cd63427c --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspProducerDataHeader.h @@ -0,0 +1,80 @@ +/** @file + + Copyright (c) 2023, Intel Corporation. All rights reserved.<BR> + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +**/ +#ifndef _FSP_PRODUCER_DATA_HEADER_H_ +#define _FSP_PRODUCER_DATA_HEADER_H_ + +#include <Guid/FspHeaderFile.h> + +#define BUILD_TIME_STAMP_SIZE 12 + +// +// FSP Header Data structure from FspHeader driver. +// +#pragma pack(1) +/// +/// FSP Producer Data Subtype - 1 +/// +typedef struct { + /// + /// Byte 0x00: Length of this FSP producer data type record. + /// + UINT16 Length; + /// + /// Byte 0x02: FSP producer data type. + /// + UINT8 Type; + /// + /// Byte 0x03: Revision of this FSP producer data type. + /// + UINT8 Revision; + /// + /// Byte 0x04: 4 byte field of RC version which is used to build this FSP image. + /// + UINT32 RcVersion; + /// + /// Byte 0x08: Represents the build time stamp "YYYYMMDDHHMM". + /// + UINT8 BuildTimeStamp[BUILD_TIME_STAMP_SIZE]; +} FSP_PRODUCER_DATA_TYPE1; + +/// +/// FSP Producer Data Subtype - 2 +/// +typedef struct { + /// + /// Byte 0x00: Length of this FSP producer data type record. + /// + UINT16 Length; + /// + /// Byte 0x02: FSP producer data type. + /// + UINT8 Type; + /// + /// Byte 0x03: Revision of this FSP producer data type. + /// + UINT8 Revision; + /// + /// Byte 0x04: 4 byte field of Mrc version which is used to build this FSP image. + /// + UINT8 MrcVersion [4]; +} FSP_PRODUCER_DATA_TYPE2; + +typedef struct { + FSP_INFO_HEADER FspInfoHeader; + FSP_INFO_EXTENDED_HEADER FspInfoExtendedHeader; + FSP_PRODUCER_DATA_TYPE1 FspProduceDataType1; + FSP_PRODUCER_DATA_TYPE2 FspProduceDataType2; + FSP_PATCH_TABLE FspPatchTable; +} FSP_PRODUCER_DATA_TABLES; +#pragma pack() + +#endif // _FSP_PRODUCER_DATA_HEADER_H diff --git a/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspUpd.h new file mode 100644 index 0000000000..f07ee2f283 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspUpd.h @@ -0,0 +1,48 @@ +/** @file + +Copyright (c) 2024, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include <FspEas.h> + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F4450554C544D /* 'MTLUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F4450554C544D /* 'MTLUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F4450554C544D /* 'MTLUPD_S' */ + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspmUpd.h new file mode 100644 index 0000000000..a19b5aaac8 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspmUpd.h @@ -0,0 +1,3240 @@ +/** @file + +Copyright (c) 2024, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +#include <MemInfoHob.h> + +/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + + +/** Fsp M Configuration +**/ +typedef struct { + +/** Offset 0x0060 - Platform Reserved Memory Size + The minimum platform memory size required to pass control into DXE +**/ + UINT64 PlatformMemorySize; + +/** Offset 0x0068 - SPD Data Length + Length of SPD Data + 0x100:256 Bytes, 0x200:512 Bytes, 0x400:1024 Bytes +**/ + UINT16 MemorySpdDataLen; + +/** Offset 0x006A - Enable above 4GB MMIO resource support + Enable/disable above 4GB MMIO resource support + $EN_DIS +**/ + UINT8 EnableAbove4GBMmio; + +/** Offset 0x006B - Reserved +**/ + UINT8 Reserved0[5]; + +/** Offset 0x0070 - Memory SPD Pointer Controller 0 Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr000; + +/** Offset 0x0078 - Memory SPD Pointer Controller 0 Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr001; + +/** Offset 0x0080 - Memory SPD Pointer Controller 0 Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr010; + +/** Offset 0x0088 - Memory SPD Pointer Controller 0 Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr011; + +/** Offset 0x0090 - Memory SPD Pointer Controller 0 Channel 2 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr020; + +/** Offset 0x0098 - Memory SPD Pointer Controller 0 Channel 2 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr021; + +/** Offset 0x00A0 - Memory SPD Pointer Controller 0 Channel 3 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr030; + +/** Offset 0x00A8 - Memory SPD Pointer Controller 0 Channel 3 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr031; + +/** Offset 0x00B0 - Memory SPD Pointer Controller 1 Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr100; + +/** Offset 0x00B8 - Memory SPD Pointer Controller 1 Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr101; + +/** Offset 0x00C0 - Memory SPD Pointer Controller 1 Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr110; + +/** Offset 0x00C8 - Memory SPD Pointer Controller 1 Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr111; + +/** Offset 0x00D0 - Memory SPD Pointer Controller 1 Channel 2 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr120; + +/** Offset 0x00D8 - Memory SPD Pointer Controller 1 Channel 2 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr121; + +/** Offset 0x00E0 - Memory SPD Pointer Controller 1 Channel 3 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr130; + +/** Offset 0x00E8 - Memory SPD Pointer Controller 1 Channel 3 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT64 MemorySpdPtr131; + +/** Offset 0x00F0 - RcompResistor settings + Indicates RcompResistor settings: Board-dependent +**/ + UINT16 RcompResistor; + +/** Offset 0x00F2 - RcompTarget settings + RcompTarget settings: board-dependent +**/ + UINT16 RcompTarget[5]; + +/** Offset 0x00FC - Dqs Map CPU to DRAM MC 0 CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqsMapCpu2DramMc0Ch0[2]; + +/** Offset 0x00FE - Dqs Map CPU to DRAM MC 0 CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqsMapCpu2DramMc0Ch1[2]; + +/** Offset 0x0100 - Dqs Map CPU to DRAM MC 0 CH 2 + Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent +**/ + UINT8 DqsMapCpu2DramMc0Ch2[2]; + +/** Offset 0x0102 - Dqs Map CPU to DRAM MC 0 CH 3 + Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent +**/ + UINT8 DqsMapCpu2DramMc0Ch3[2]; + +/** Offset 0x0104 - Dqs Map CPU to DRAM MC 1 CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqsMapCpu2DramMc1Ch0[2]; + +/** Offset 0x0106 - Dqs Map CPU to DRAM MC 1 CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqsMapCpu2DramMc1Ch1[2]; + +/** Offset 0x0108 - Dqs Map CPU to DRAM MC 1 CH 2 + Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent +**/ + UINT8 DqsMapCpu2DramMc1Ch2[2]; + +/** Offset 0x010A - Dqs Map CPU to DRAM MC 1 CH 3 + Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent +**/ + UINT8 DqsMapCpu2DramMc1Ch3[2]; + +/** Offset 0x010C - Dq Map CPU to DRAM MC 0 CH 0 + Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqMapCpu2DramMc0Ch0[16]; + +/** Offset 0x011C - Dq Map CPU to DRAM MC 0 CH 1 + Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqMapCpu2DramMc0Ch1[16]; + +/** Offset 0x012C - Dq Map CPU to DRAM MC 0 CH 2 + Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent +**/ + UINT8 DqMapCpu2DramMc0Ch2[16]; + +/** Offset 0x013C - Dq Map CPU to DRAM MC 0 CH 3 + Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent +**/ + UINT8 DqMapCpu2DramMc0Ch3[16]; + +/** Offset 0x014C - Dq Map CPU to DRAM MC 1 CH 0 + Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqMapCpu2DramMc1Ch0[16]; + +/** Offset 0x015C - Dq Map CPU to DRAM MC 1 CH 1 + Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqMapCpu2DramMc1Ch1[16]; + +/** Offset 0x016C - Dq Map CPU to DRAM MC 1 CH 2 + Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent +**/ + UINT8 DqMapCpu2DramMc1Ch2[16]; + +/** Offset 0x017C - Dq Map CPU to DRAM MC 1 CH 3 + Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent +**/ + UINT8 DqMapCpu2DramMc1Ch3[16]; + +/** Offset 0x018C - Dqs Pins Interleaved Setting + Indicates DqPinsInterleaved setting: board-dependent + $EN_DIS +**/ + UINT8 DqPinsInterleaved; + +/** Offset 0x018D - Smram Mask + The SMM Regions AB-SEG and/or H-SEG reserved + 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both +**/ + UINT8 SmramMask; + +/** Offset 0x018E - MRC Fast Boot + Enables/Disable the MRC fast path thru the MRC + $EN_DIS +**/ + UINT8 MrcFastBoot; + +/** Offset 0x018F - Rank Margin Tool per Task + This option enables the user to execute Rank Margin Tool per major training step + in the MRC. + $EN_DIS +**/ + UINT8 RmtPerTask; + +/** Offset 0x0190 - Training Trace + This option enables the trained state tracing feature in MRC. This feature will + print out the key training parameters state across major training steps. + $EN_DIS +**/ + UINT8 TrainTrace; + +/** Offset 0x0191 - Reserved +**/ + UINT8 Reserved1[7]; + +/** Offset 0x0198 - Tseg Size + Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build + 0x0400000:4MB, 0x01000000:16MB +**/ + UINT32 TsegSize; + +/** Offset 0x019C - MMIO Size + Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB +**/ + UINT16 MmioSize; + +/** Offset 0x019E - Probeless Trace + Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. + This also requires IED to be enabled. + $EN_DIS +**/ + UINT8 ProbelessTrace; + +/** Offset 0x019F - Enable SMBus + Enable/disable SMBus controller. + $EN_DIS +**/ + UINT8 SmbusEnable; + +/** Offset 0x01A0 - Spd Address Tabl + Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used + if SPD Address is 00 +**/ + UINT8 SpdAddressTable[16]; + +/** Offset 0x01B0 - Platform Debug Consent + Enabled Trace active: TraceHub is enabled and trace is active, blocks s0ix.\n + \n + Enabled Trace ready: TraceHub is enabled and allowed S0ix.\n + \n + Enabled Trace power off: TraceHub is powergated, provide setting close to functional + low power state\n + \n + Manual: user needs to configure Advanced Debug Settings manually, aimed at advanced users + 0:Disabled, 2:Enabled Trace Active, 4:Enabled Trace Ready, 6:Enable Trace Power-Off, 7:Manual +**/ + UINT8 PlatformDebugOption; + +/** Offset 0x01B1 - DCI Enable + Determine if to enable DCI debug from host + $EN_DIS +**/ + UINT8 DciEn; + +/** Offset 0x01B2 - Reserved +**/ + UINT8 Reserved2; + +/** Offset 0x01B3 - DCI DbC Mode + Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: + Set both USB2/3DBCEN; No Change: Comply with HW value + 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change +**/ + UINT8 DciDbcMode; + +/** Offset 0x01B4 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support + This BIOS option enables kernel and platform debug for USB3 interface over a UFP + Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DciUsb3TypecUfpDbg; + +/** Offset 0x01B5 - SOC Trace Hub Mode + Enable/Disable SOC TraceHub + $EN_DIS +**/ + UINT8 SocTraceHubMode; + +/** Offset 0x01B6 - SOC Trace Hub Memory Region 0 buffer Size + Select size of memory region 0 buffer. Memory allocated by BIOS only applies to + ITH tool running on the host. For ITH tool running on the target, choose None/OS, + memory shall be allocated by tool. User should be cautious to choose the amount + of memory. If chosen size is larger than half of system memory, setup will automatically + rollback to default value. + 0x00:1MB, 0x03:8MB, 0x06:64MB, 0x07:128MB, 0x08:256MB, 0x09:512MB, 0x0A:1GB, 0x0B:2GB, + 0x0C:4GB, 0x0D:8GB, 0x0E:0MB +**/ + UINT16 SocTraceHubMemReg0Size; + +/** Offset 0x01B8 - SOC Trace Hub Memory Region 1 buffer Size + Select size of memory region 1 buffer. Memory allocated by BIOS only applies to + ITH tool running on the host. For ITH tool running on the target, choose None/OS, + memory shall be allocated by tool. User should be cautious to choose the amount + of memory. If chosen size is larger than half of system memory, setup will automatically + rollback to default value. + 0x00:1MB, 0x03:8MB, 0x06:64MB, 0x07:128MB, 0x08:256MB, 0x09:512MB, 0x0A:1GB, 0x0B:2GB, + 0x0C:4GB, 0x0D:8GB, 0x0E:0MB +**/ + UINT16 SocTraceHubMemReg1Size; + +/** Offset 0x01BA - Reserved +**/ + UINT8 Reserved3; + +/** Offset 0x01BB - PCH Trace Hub Mode + Enable/Disable PCH TraceHub + $EN_DIS +**/ + UINT8 PchTraceHubMode; + +/** Offset 0x01BC - PCH Trace Hub Memory Region 0 buffer Size + Select size of memory region 0 buffer. Memory allocated by BIOS only applies to + ITH tool running on the host. For ITH tool running on the target, choose None/OS, + memory shall be allocated by tool. User should be cautious to choose the amount + of memory. If chosen size is larger than half of system memory, setup will automatically + rollback to default value. + 0x00:1MB, 0x03:8MB, 0x06:64MB, 0x07:128MB, 0x08:256MB, 0x09:512MB, 0x0A:1GB, 0x0B:2GB, + 0x0C:4GB, 0x0D:8GB, 0x0E:0MB +**/ + UINT16 PchTraceHubMemReg0Size; + +/** Offset 0x01BE - PCH Trace Hub Memory Region 1 buffer Size + Select size of memory region 1 buffer. Memory allocated by BIOS only applies to + ITH tool running on the host. For ITH tool running on the target, choose None/OS, + memory shall be allocated by tool. User should be cautious to choose the amount + of memory. If chosen size is larger than half of system memory, setup will automatically + rollback to default value. + 0x00:1MB, 0x03:8MB, 0x06:64MB, 0x07:128MB, 0x08:256MB, 0x09:512MB, 0x0A:1GB, 0x0B:2GB, + 0x0C:4GB, 0x0D:8GB, 0x0E:0MB +**/ + UINT16 PchTraceHubMemReg1Size; + +/** Offset 0x01C0 - Reserved +**/ + UINT8 Reserved4[4]; + +/** Offset 0x01C4 - HD Audio DMIC Link Clock Select + Determines DMIC<N> Clock Source. 0: Both, 1: ClkA, 2: ClkB + 0: Both, 1: ClkA, 2: ClkB +**/ + UINT8 PchHdaAudioLinkDmicClockSelect[2]; + +/** Offset 0x01C6 - State of X2APIC_OPT_OUT bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 X2ApicOptOut; + +/** Offset 0x01C7 - State of DMA_CONTROL_GUARANTEE bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 DmaControlGuarantee; + +/** Offset 0x01C8 - Base addresses for VT-d function MMIO access + Base addresses for VT-d MMIO access per VT-d engine +**/ + UINT32 VtdBaseAddress[9]; + +/** Offset 0x01EC - Disable VT-d + 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) + $EN_DIS +**/ + UINT8 VtdDisable; + +/** Offset 0x01ED - Vtd Programming for Igd + 1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdIgdEnable; + +/** Offset 0x01EE - Vtd Programming for Iop + 1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdIopEnable; + +/** Offset 0x01EF - Internal Graphics Pre-allocated Memory + Size of memory preallocated for internal graphics. + 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0xF0:4MB, 0xF1:8MB, 0xF2:12MB, + 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, 0xFA:44MB, + 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB +**/ + UINT8 IgdDvmt50PreAlloc; + +/** Offset 0x01F0 - Internal Graphics + Enable/disable internal graphics. + $EN_DIS +**/ + UINT8 InternalGfx; + +/** Offset 0x01F1 - Reserved +**/ + UINT8 Reserved5; + +/** Offset 0x01F2 - Board Type + MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile + Halo, 7=UP Server + 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server +**/ + UINT8 UserBd; + +/** Offset 0x01F3 - Reserved +**/ + UINT8 Reserved6; + +/** Offset 0x01F4 - DDR Frequency Limit + Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, + 2133, 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 DdrFreqLimit; + +/** Offset 0x01F6 - SAGV + System Agent dynamic frequency support. + 0:Disabled, 1:Enabled +**/ + UINT8 SaGv; + +/** Offset 0x01F7 - SAGV WP Mask + System Agent dynamic frequency workpoints that memory will be training at the enabled + frequencies. + 0x3:Points0_1, 0x7:Points0_1_2, 0xF:AllPoints0_1_2_3 +**/ + UINT8 SaGvWpMask; + +/** Offset 0x01F8 - Memory Test on Warm Boot + Run Base Memory Test on Warm Boot + 0:Disable, 1:Enable +**/ + UINT8 MemTestOnWarmBoot; + +/** Offset 0x01F9 - DDR Speed Control + DDR Frequency and Gear control for all SAGV points. + 0:Auto, 1:Manual +**/ + UINT8 DdrSpeedControl; + +/** Offset 0x01FA - Controller 0 Channel 0 DIMM Control + Enable / Disable DIMMs on Controller 0 Channel 0 + $EN_DIS +**/ + UINT8 DisableMc0Ch0; + +/** Offset 0x01FB - Controller 0 Channel 1 DIMM Control + Enable / Disable DIMMs on Controller 0 Channel 1 + $EN_DIS +**/ + UINT8 DisableMc0Ch1; + +/** Offset 0x01FC - Controller 0 Channel 2 DIMM Control + Enable / Disable DIMMs on Controller 0 Channel 2 + $EN_DIS +**/ + UINT8 DisableMc0Ch2; + +/** Offset 0x01FD - Controller 0 Channel 3 DIMM Control + Enable / Disable DIMMs on Controller 0 Channel 3 + $EN_DIS +**/ + UINT8 DisableMc0Ch3; + +/** Offset 0x01FE - Controller 1 Channel 0 DIMM Control + Enable / Disable DIMMs on Controller 1 Channel 0 + $EN_DIS +**/ + UINT8 DisableMc1Ch0; + +/** Offset 0x01FF - Controller 1 Channel 1 DIMM Control + Enable / Disable DIMMs on Controller 1 Channel 1 + $EN_DIS +**/ + UINT8 DisableMc1Ch1; + +/** Offset 0x0200 - Controller 1 Channel 2 DIMM Control + Enable / Disable DIMMs on Controller 1 Channel 2 + $EN_DIS +**/ + UINT8 DisableMc1Ch2; + +/** Offset 0x0201 - Controller 1 Channel 3 DIMM Control + Enable / Disable DIMMs on Controller 1 Channel 3 + $EN_DIS +**/ + UINT8 DisableMc1Ch3; + +/** Offset 0x0202 - Scrambler Support + This option enables data scrambling in memory. + $EN_DIS +**/ + UINT8 ScramblerSupport; + +/** Offset 0x0203 - SPD Profile Selected + Select DIMM timing profile. Options are 0:Default SPD Profile, 1:Custom Profile, + 2:XMP Profile 1, 3:XMP Profile 2, 4:XMP Profile 3, 5:XMP User Profile 4, 6:XMP + User Profile 5 + 0:Default SPD Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2, 4:XMP + Profile 3, 5:XMP User Profile 4, 6:XMP User Profile 5 +**/ + UINT8 SpdProfileSelected; + +/** Offset 0x0204 - Reserved +**/ + UINT8 Reserved7[102]; + +/** Offset 0x026A - Memory Reference Clock + 100MHz, 133MHz. + 0:133MHz, 1:100MHz +**/ + UINT8 RefClk; + +/** Offset 0x026B - Reserved +**/ + UINT8 Reserved8[9]; + +/** Offset 0x0274 - Memory Vdd Voltage + DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM + chips) in millivolts. <b>0=Platform Default (no override)</b>, 1200=1.2V, 1350=1.35V etc. + 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 + Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts +**/ + UINT16 VddVoltage; + +/** Offset 0x0276 - Reserved +**/ + UINT8 Reserved9[4]; + +/** Offset 0x027A - Memory Ratio + Automatic or the frequency will equal ratio times reference clock. Set to Auto to + recalculate memory timings listed below. + 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT16 Ratio; + +/** Offset 0x027C - tCL + CAS Latency, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tCL; + +/** Offset 0x027D - tCWL + Min CAS Write Latency Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tCWL; + +/** Offset 0x027E - tFAW + Min Four Activate Window Delay Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tFAW; + +/** Offset 0x0280 - tRAS + RAS Active Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tRAS; + +/** Offset 0x0282 - tRCD/tRP + RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 255. Only used + if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). +**/ + UINT8 tRCDtRP; + +/** Offset 0x0283 - Reserved +**/ + UINT8 Reserved10; + +/** Offset 0x0284 - tREFI + Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tREFI; + +/** Offset 0x0286 - tRFC + Min Refresh Recovery Delay Time, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tRFC; + +/** Offset 0x0288 - tRRD + Min Row Active to Row Active Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tRRD; + +/** Offset 0x0289 - tRTP + Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 255. Only used + if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). +**/ + UINT8 tRTP; + +/** Offset 0x028A - tWR + Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, + 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). + 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, + 34:34, 40:40 +**/ + UINT8 tWR; + +/** Offset 0x028B - tWTR + Min Internal Write to Read Command Delay Time, 0: AUTO, max: 255. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tWTR; + +/** Offset 0x028C - Reserved +**/ + UINT8 Reserved11[12]; + +/** Offset 0x0298 - NMode + System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N +**/ + UINT8 NModeSupport; + +/** Offset 0x0299 - Enable Intel HD Audio (Azalia) + 0: Disable, 1: Enable (Default) Azalia controller + $EN_DIS +**/ + UINT8 PchHdaEnable; + +/** Offset 0x029A - Enable PCH ISH Controller + 0: Disable, 1: Enable (Default) ISH Controller + $EN_DIS +**/ + UINT8 PchIshEnable; + +/** Offset 0x029B - Reserved +**/ + UINT8 Reserved12[7]; + +/** Offset 0x02A2 - SAGV Gear Ratio + Gear Selection for SAGV points. 0 - Auto, 2-Gear 2, 4-Gear 4 +**/ + UINT8 SaGvGear[4]; + +/** Offset 0x02A6 - SAGV Frequency + SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300. +**/ + UINT16 SaGvFreq[4]; + +/** Offset 0x02AE - SAGV Disabled Gear Ratio + Gear Selection for SAGV Disabled. 0 - Auto, 2-Gear 2, 2-Gear 4 +**/ + UINT8 GearRatio; + +/** Offset 0x02AF - Reserved +**/ + UINT8 Reserved13[69]; + +/** Offset 0x02F4 - MMIO size adjustment for AUTO mode + Positive number means increasing MMIO size, Negative value means decreasing MMIO + size: 0 (Default)=no change to AUTO mode MMIO size +**/ + UINT16 MmioSizeAdjustment; + +/** Offset 0x02F6 - Selection of the primary display device + 0=iGFX, 3(Default)=AUTO, 4=Hybrid Graphics + 0:iGFX, 3:AUTO, 4:Hybrid Graphics +**/ + UINT8 PrimaryDisplay; + +/** Offset 0x02F7 - Reserved +**/ + UINT8 Reserved14; + +/** Offset 0x02F8 - Temporary MMIO address for GMADR + Obsolete field now and it has been extended to 64 bit address, used LMemBar +**/ + UINT32 GmAdr; + +/** Offset 0x02FC - Temporary MMIO address for GTTMMADR + The reference code will use this as Temporary MMIO address space to access GTTMMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr + to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO + + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) +**/ + UINT32 GttMmAdr; + +/** Offset 0x0300 - Enable/Disable MRC TXT dependency + When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): + MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization + $EN_DIS +**/ + UINT8 TxtImplemented; + +/** Offset 0x0301 - Enable/Disable SA OcSupport + Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport + $EN_DIS +**/ + UINT8 SaOcSupport; + +/** Offset 0x0302 - GT slice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override +**/ + UINT8 GtVoltageMode; + +/** Offset 0x0303 - Maximum GTs turbo ratio override + 0(Default)=Minimal/Auto, 60=Maximum +**/ + UINT8 GtMaxOcRatio; + +/** Offset 0x0304 - The voltage offset applied to GT slice + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 GtVoltageOffset; + +/** Offset 0x0306 - The GT slice voltage override which is applied to the entire range of GT frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtVoltageOverride; + +/** Offset 0x0308 - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtAdaptiveVoltage; + +/** Offset 0x030A - voltage offset applied to the SA + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 SaVoltageOffset; + +/** Offset 0x030C - PCIe root port Function number for Hybrid Graphics dGPU + Root port Index number to indicate which PCIe root port has dGPU +**/ + UINT8 RootPortIndex; + +/** Offset 0x030D - Realtime Memory Timing + 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform + realtime memory timing changes after MRC_DONE. + 0: Disabled, 1: Enabled +**/ + UINT8 RealtimeMemoryTiming; + +/** Offset 0x030E - Reserved +**/ + UINT8 Reserved15; + +/** Offset 0x030F - Enable/Disable SA IPU + Enable(Default): Enable SA IPU, Disable: Disable SA IPU + $EN_DIS +**/ + UINT8 SaIpuEnable; + +/** Offset 0x0310 - IMGU CLKOUT Configuration + The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>. + $EN_DIS +**/ + UINT8 ImguClkOutEn[6]; + +/** Offset 0x0316 - Program GPIOs for LFP on DDI port-A device + 0=Disabled,1(Default)=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortAConfig; + +/** Offset 0x0317 - Program GPIOs for LFP on DDI port-B device + 0(Default)=Disabled,1=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortBConfig; + +/** Offset 0x0318 - Enable or disable HPD of DDI port A + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortAHpd; + +/** Offset 0x0319 - Enable or disable HPD of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBHpd; + +/** Offset 0x031A - Enable or disable HPD of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCHpd; + +/** Offset 0x031B - Enable or disable HPD of DDI port 1 + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPort1Hpd; + +/** Offset 0x031C - Enable or disable HPD of DDI port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort2Hpd; + +/** Offset 0x031D - Enable or disable HPD of DDI port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort3Hpd; + +/** Offset 0x031E - Enable or disable HPD of DDI port 4 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort4Hpd; + +/** Offset 0x031F - Enable or disable DDC of DDI port A + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortADdc; + +/** Offset 0x0320 - Enable or disable DDC of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBDdc; + +/** Offset 0x0321 - Enable or disable DDC of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCDdc; + +/** Offset 0x0322 - Enable DDC setting of DDI Port 1 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort1Ddc; + +/** Offset 0x0323 - Enable DDC setting of DDI Port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort2Ddc; + +/** Offset 0x0324 - Enable DDC setting of DDI Port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort3Ddc; + +/** Offset 0x0325 - Enable DDC setting of DDI Port 4 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort4Ddc; + +/** Offset 0x0326 - GPIO PIN MUX to choose between GPP_SA and GPP_SD Group. + Default will be 0 for each Display PIN Mux which is GPP_SA Group. (0 = SA GROUP, + 1 = SD GROUP). BIT0 - EDP VDDEN, BIT1 - EDP BKLTEN, BIT2 - EDP BKLTCTRL, BIT3 + - DDI-A, BIT4 - DDI-1/HPD1, BIT5 - DDI-2/HPD2, BIT6 - DDI-3/HPD3, BIT7 - DDI-4/HPD4 +**/ + UINT8 DisplayGpioPinMux; + +/** Offset 0x0327 - Reserved +**/ + UINT8 Reserved16[17]; + +/** Offset 0x0338 - Per-core HT Disable + Defines the per-core HT disable mask where: 1 - Disable selected logical core HT, + 0 - is ignored. Input is in HEX and each bit maps to a logical core. Ex. A value + of '1F' would disable HT for cores 4,3,2,1 and 0. Default is 0, all cores have + HT enabled. Range is 0 - 0x7F for max 8 cores. You can only disable up to MAX_CORE_COUNT - 1. +**/ + UINT16 PerCoreHtDisable; + +/** Offset 0x033A - Reserved +**/ + UINT8 Reserved17[6]; + +/** Offset 0x0340 - Thermal Velocity Boost Ratio clipping + 0: Disabled, 1(Default): Enabled. This service controls Core frequency reduction + caused by high package temperatures for processors that implement the Intel Thermal + Velocity Boost (TVB) feature + $EN_DIS +**/ + UINT8 TvbRatioClipping; + +/** Offset 0x0341 - Thermal Velocity Boost voltage optimization + 0: Disabled, 1: Enabled(Default). This service controls thermal based voltage optimizations + for processors that implement the Intel Thermal Velocity Boost (TVB) feature. + $EN_DIS +**/ + UINT8 TvbVoltageOptimization; + +/** Offset 0x0342 - Reserved +**/ + UINT8 Reserved18[45]; + +/** Offset 0x036F - DMI Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 DmiMaxLinkSpeed; + +/** Offset 0x0370 - PCH DMI Equalization Phase 2 + DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): + AUTO - Use the current default method + 0:Disable phase2, 1:Enable phase2, 2:Auto +**/ + UINT8 PchDmiGen3EqPh2Enable; + +/** Offset 0x0371 - PCH DMI Gen3 Equalization Phase3 + DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 PchDmiGen3EqPh3Method; + +/** Offset 0x0372 - Enable/Disable DMI GEN3 Static EQ Phase1 programming + Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiGen3ProgramStaticEq; + +/** Offset 0x0373 - PCH DMI Gen3 Root port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 4 is default for each lane +**/ + UINT8 PchDmiGen3RootPortPreset[8]; + +/** Offset 0x037B - PCH DMI Gen3 End port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 PchDmiGen3EndPointPreset[8]; + +/** Offset 0x0383 - PCH DMI Gen3 End port Hint values per lane + Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 PchDmiGen3EndPointHint[8]; + +/** Offset 0x038B - DMI ASPM Configuration:{Combo + Set ASPM Configuration + 0:Disabled, 1:L0s, 2:L1, 3:L1L0s +**/ + UINT8 DmiAspm; + +/** Offset 0x038C - Reserved +**/ + UINT8 Reserved19; + +/** Offset 0x038D - Enable/Disable DMI GEN3 Hardware Eq + Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0): Disable Hardware Eq, Enabled(0x1)(Default): + Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiHweq; + +/** Offset 0x038E - Enable/Disable DMI GEN3 Phase 23 Bypass + DMIGEN3 Phase 23 Bypass. Disabled(0x0)(Default): Disable Phase 23 Bypass, Enabled(0x1): + Enable Phase 23 Bypass + $EN_DIS +**/ + UINT8 Gen3EqPhase23Bypass; + +/** Offset 0x038F - Enable/Disable DMI GEN3 Phase 3 Bypass + DMIGEN3 Phase 3 Bypass. Disabled(0x0)(Default): Disable Phase 3 Bypass, Enabled(0x1): + Enable Phase 3 Bypass + $EN_DIS +**/ + UINT8 Gen3EqPhase3Bypass; + +/** Offset 0x0390 - Enable/Disable DMI Gen3 EQ Local Transmitter Coefficient Override Enable + Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0): Disable Local + Transmitter Coefficient Override, Enabled(0x1)(Default): Enable Local Transmitter + Coefficient Override + $EN_DIS +**/ + UINT8 Gen3LtcoEnable; + +/** Offset 0x0391 - Enable/Disable DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable + Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0)(Default): + Disable Remote Transmitter Coefficient/Preset Override, Enabled(0x1): Enable Remote + Transmitter Coefficient/Preset Override + $EN_DIS +**/ + UINT8 Gen3RtcoRtpoEnable; + +/** Offset 0x0392 - DMI Gen3 Transmitter Pre-Cursor Coefficient + Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10, + 2 is default for each lane +**/ + UINT8 DmiGen3Ltcpre[8]; + +/** Offset 0x039A - DMI Gen3 Transmitter Post-Cursor Coefficient + Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default + for each lane +**/ + UINT8 DmiGen3Ltcpo[8]; + +/** Offset 0x03A2 - Reserved +**/ + UINT8 Reserved20[34]; + +/** Offset 0x03C4 - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable + Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable, + Manual(0x1): Enable DmiGen3DsPresetEnable + $EN_DIS +**/ + UINT8 DmiGen3DsPresetEnable; + +/** Offset 0x03C5 - DMI Gen3 Root port preset Rx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default + for each lane +**/ + UINT8 DmiGen3DsPortRxPreset[8]; + +/** Offset 0x03CD - DMI Gen3 Root port preset Tx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default + for each lane +**/ + UINT8 DmiGen3DsPortTxPreset[8]; + +/** Offset 0x03D5 - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable + Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable, + Manual(0x1): Enable DmiGen3UsPresetEnable + $EN_DIS +**/ + UINT8 DmiGen3UsPresetEnable; + +/** Offset 0x03D6 - DMI Gen3 Root port preset Rx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default + for each lane +**/ + UINT8 DmiGen3UsPortRxPreset[8]; + +/** Offset 0x03DE - DMI Gen3 Root port preset Tx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default + for each lane +**/ + UINT8 DmiGen3UsPortTxPreset[8]; + +/** Offset 0x03E6 - Reserved +**/ + UINT8 Reserved21[54]; + +/** Offset 0x041C - DMI ASPM L1 exit Latency + Range: 0-7, 4 is default L1 exit Latency +**/ + UINT8 DmiAspmL1ExitLatency; + +/** Offset 0x041D - Reserved +**/ + UINT8 Reserved22[63]; + +/** Offset 0x045C - BIST on Reset + Enable/Disable BIST (Built-In Self Test) on reset. <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 BistOnReset; + +/** Offset 0x045D - Skip Stop PBET Timer Enable/Disable + Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 SkipStopPbet; + +/** Offset 0x045E - Over clocking support + Over clocking support; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 OcSupport; + +/** Offset 0x045F - Over clocking Lock + Lock Overclocking. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 OcLock; + +/** Offset 0x0460 - Maximum Core Turbo Ratio Override + Maximum core turbo ratio override allows to increase CPU core frequency beyond the + fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 if CoreRatioExtensionMode + is disabled. 0-120 if CoreRatioExtensionMode is enabled. +**/ + UINT8 CoreMaxOcRatio; + +/** Offset 0x0461 - Core voltage mode + Core voltage mode; <b>0: Adaptive</b>; 1: Override. + $EN_DIS +**/ + UINT8 CoreVoltageMode; + +/** Offset 0x0462 - Maximum clr turbo ratio override + Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the + fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 +**/ + UINT8 RingMaxOcRatio; + +/** Offset 0x0463 - Hyper Threading Enable/Disable + Enable or Disable Hyper-Threading Technology. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 HyperThreading; + +/** Offset 0x0464 - Enable or Disable CPU Ratio Override + Enable/Disable CPU Flex Ratio Programming; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 CpuRatioOverride; + +/** Offset 0x0465 - CPU ratio value + This value must be between Max Efficiency Ratio (LFM) and Maximum non-turbo ratio + set by Hardware (HFM). Valid Range 0 to 63. +**/ + UINT8 CpuRatio; + +/** Offset 0x0466 - Reserved +**/ + UINT8 Reserved23; + +/** Offset 0x0467 - Number of active big cores + Number of P-cores to enable in each processor package. Note: Number of P-Cores and + E-Cores are looked at together. When both are {0,0 + 0:Disable all big cores, 1:1, 2:2, 3:3, 0xFF:Active all big cores +**/ + UINT8 ActiveCoreCount; + +/** Offset 0x0468 - Processor Early Power On Configuration FCLK setting + FCLK frequency can take values of 400MHz, 800MHz and 1GHz. <b>0: 800 MHz (ULT/ULX)</b>. + <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- 2: 400 MHz. - 3: Reserved + 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved +**/ + UINT8 FClkFrequency; + +/** Offset 0x0469 - Enable or Disable VMX + Enable or Disable VMX, When enabled, a VMM can utilize the additional hardware capabilities + provided by Vanderpool Technology. 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x046A - AVX2 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx2RatioOffset; + +/** Offset 0x046B - AVX3 Ratio Offset + DEPRECATED. 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease + AVX ratio vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx3RatioOffset; + +/** Offset 0x046C - BCLK Adaptive Voltage Enable + When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: + Disable;<b> 1: Enable + $EN_DIS +**/ + UINT8 BclkAdaptiveVoltage; + +/** Offset 0x046D - Reserved +**/ + UINT8 Reserved24; + +/** Offset 0x046E - core voltage override + The core voltage override which is applied to the entire range of cpu core frequencies. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageOverride; + +/** Offset 0x0470 - Core Turbo Adaptive Voltage + Adaptive voltage applied to the cpu core when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 CoreAdaptiveVoltage; + +/** Offset 0x0472 - Core Turbo voltage Offset + The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 +**/ + UINT16 CoreVoltageOffset; + +/** Offset 0x0474 - Core PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 +**/ + UINT8 CorePllVoltageOffset; + +/** Offset 0x0475 - Ring Downbin + Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always + lower than the core ratio.0: Disable; <b>1: Enable.</b> + $EN_DIS +**/ + UINT8 RingDownBin; + +/** Offset 0x0476 - Ring voltage mode + Ring voltage mode; <b>0: Adaptive</b>; 1: Override. + $EN_DIS +**/ + UINT8 RingVoltageMode; + +/** Offset 0x0477 - TjMax Offset + TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support + TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 +**/ + UINT8 TjMaxOffset; + +/** Offset 0x0478 - Ring voltage override + The ring voltage override which is applied to the entire range of cpu ring frequencies. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageOverride; + +/** Offset 0x047A - Ring Turbo Adaptive Voltage + Adaptive voltage applied to the cpu ring when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 RingAdaptiveVoltage; + +/** Offset 0x047C - Ring Turbo voltage Offset + The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 +**/ + UINT16 RingVoltageOffset; + +/** Offset 0x047E - Enable or Disable TME + Configure Total Memory Encryption (TME) to protect DRAM data from physical attacks. + <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 TmeEnable; + +/** Offset 0x047F - Enable CPU CrashLog + Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 CpuCrashLogEnable; + +/** Offset 0x0480 - CPU Run Control + Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2: + No Change</b> + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DebugInterfaceEnable; + +/** Offset 0x0481 - CPU Run Control Lock + Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 DebugInterfaceLockEnable; + +/** Offset 0x0482 - Reserved +**/ + UINT8 Reserved25[67]; + +/** Offset 0x04C5 - Core VF Point Offset Mode + Selects Core Voltage & Frequency Offset mode between Legacy and Selection modes. + In Legacy Mode, setting a global offset for the entire VF curve. In Selection Mode, + setting a selected VF point; <b>0: Legacy</b>; 1: Selection. + 0:Legacy, 1:Selection +**/ + UINT8 CoreVfPointOffsetMode; + +/** Offset 0x04C6 - Core VF Point Offset + Array used to specifies the Core Voltage Offset applied to the each selected VF + Point. This voltage is specified in millivolts. +**/ + UINT16 CoreVfPointOffset[15]; + +/** Offset 0x04E4 - Core VF Point Offset Prefix + Sets the CoreVfPointOffset value as positive or negative for corresponding core + VF Point; <b>0: Positive </b>; 1: Negative. + 0:Positive, 1:Negative +**/ + UINT8 CoreVfPointOffsetPrefix[15]; + +/** Offset 0x04F3 - Core VF Point Ratio + Array for the each selected Core VF Point to display the ration. +**/ + UINT8 CoreVfPointRatio[15]; + +/** Offset 0x0502 - Core VF Point Count + Number of supported Core Voltage & Frequency Point Offset +**/ + UINT8 CoreVfPointCount; + +/** Offset 0x0503 - Reserved +**/ + UINT8 Reserved26[25]; + +/** Offset 0x051C - Per Core Max Ratio override + Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new + favored core ratio to each Core. <b>0: Disable</b>, 1: enable + $EN_DIS +**/ + UINT8 PerCoreRatioOverride; + +/** Offset 0x051D - Reserved +**/ + UINT8 Reserved27[41]; + +/** Offset 0x0546 - Per Core Current Max Ratio + Array for the Per Core Max Ratio +**/ + UINT8 PerCoreRatio[8]; + +/** Offset 0x054E - Reserved +**/ + UINT8 Reserved28[54]; + +/** Offset 0x0584 - Margin Limit Check + Margin Limit Check. Choose level of margin check + 0:Disable, 1:L1, 2:L2, 3:Both +**/ + UINT8 MarginLimitCheck; + +/** Offset 0x0585 - Reserved +**/ + UINT8 Reserved29[14]; + +/** Offset 0x0593 - Pvd Ratio Threshold for SOC/CPU die + Array of Pvd Ratio Threshold for SOC/CPU die is the threshold value for input ratio + (P0 to Pn) to select the multiplier so that the output is within the DCO frequency + range. As per the die selected, this threshold is applied to SA and MC/CMI PLL + for SOC die and SA, Ring and Atom PLL for CPU die. Range 0-63. When the threshold + is 0, static PVD ratio is selected based on the PVD Mode for SOC. <b>0: Default</b>. +**/ + UINT8 PvdRatioThreshold[2]; + +/** Offset 0x0595 - Reserved +**/ + UINT8 Reserved30[68]; + +/** Offset 0x05D9 - GPIO Override + Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings + before moved to FSP. Available configurations 0: Disable; 1: Level 1 - Skips GPIO + configuration in PEI/FSPM/FSPT phase;2: Level 2 - Reserved for use +**/ + UINT8 GpioOverride; + +/** Offset 0x05DA - Reserved +**/ + UINT8 Reserved31[10]; + +/** Offset 0x05E4 - CPU BCLK OC Frequency + CPU BCLK OC Frequency in KHz units. 98000000Hz = 98MHz <b>0 - Auto</b>. Range is + 40Mhz-1000Mhz. +**/ + UINT32 CpuBclkOcFrequency; + +/** Offset 0x05E8 - Reserved +**/ + UINT8 Reserved32[4]; + +/** Offset 0x05EC - Enable CPU CrashLog GPRs dump + Enable or Disable CPU CrashLog GPRs dump; <b>0: Disable</b>; 1: Enable; 2: Only + disable Smm GPRs dump + 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled +**/ + UINT8 CrashLogGprs; + +/** Offset 0x05ED - Reserved +**/ + UINT8 Reserved33[142]; + +/** Offset 0x067B - Acoustic Noise Mitigation feature + Enabling this option will help mitigate acoustic noise on certain SKUs when the + CPU is in deeper C state. <b>0: Disabled</b>; 1: Enabled + $EN_DIS +**/ + UINT8 AcousticNoiseMitigation; + +/** Offset 0x067C - Reserved +**/ + UINT8 Reserved34[2]; + +/** Offset 0x067E - Platform Power Pmax + PSYS PMax power, defined in 1/8 Watt increments. <b>0 - Auto</b> Specified in 1/8 + Watt increments. Range 0-1024 Watts(0-8191). Value of 800 = 100W +**/ + UINT16 PsysPmax; + +/** Offset 0x0680 - Reserved +**/ + UINT8 Reserved35[12]; + +/** Offset 0x068C - AcLoadline + AC Loadline defined in 1/100 mOhms. A value of 100 = 1.00 mOhm, and 1255 = 12.55 + mOhm. Range is 0-6249 (0-62.49 mOhms). 0 = AUTO/HW default. [0] for IA, [1] for + GT, [2] for SA, [3] through [5] are Reserved. +**/ + UINT16 AcLoadline[6]; + +/** Offset 0x0698 - DcLoadline + DC Loadline defined in 1/100 mOhms. A value of 100 = 1.00 mOhm, and 1255 = 12.55 + mOhm. Range is 0-6249 (0-62.49 mOhms). 0 = AUTO/HW default. [0] for IA, [1] for + GT, [2] for SA, [3] through [5] are Reserved. +**/ + UINT16 DcLoadline[6]; + +/** Offset 0x06A4 - Power State 1 Threshold current + PS Current Threshold1, defined in 1/4 A increments. A value of 400 = 100A. Range + 0-512, which translates to 0-128A. 0 = AUTO. [0] for IA, [1] for GT, [2] for SA, + [3] through [5] are Reserved. +**/ + UINT16 Psi1Threshold[6]; + +/** Offset 0x06B0 - Power State 2 Threshold current + PS Current Threshold2, defined in 1/4 A increments. A value of 400 = 100A. Range + 0-512, which translates to 0-128A. 0 = AUTO. [0] for IA, [1] for GT, [2] for SA, + [3] through [5] are Reserved. +**/ + UINT16 Psi2Threshold[6]; + +/** Offset 0x06BC - Power State 3 Threshold current + PS Current Threshold3, defined in 1/4 A increments. A value of 400 = 100A. Range + 0-512, which translates to 0-128A. 0 = AUTO. [0] for IA, [1] for GT, [2] for SA, + [3] through [5] are Reserved. +**/ + UINT16 Psi3Threshold[6]; + +/** Offset 0x06C8 - Reserved +**/ + UINT8 Reserved36[54]; + +/** Offset 0x06FE - Thermal Design Current enable/disable + Thermal Design Current enable/disable; <b>0: Disable</b>; 1: Enable. [0] for IA, + [1] for GT, [2] for SA, [3] through [5] are Reserved. +**/ + UINT8 TdcEnable[6]; + +/** Offset 0x0704 - Thermal Design Current time window + TDC Time Window, value of IA either in milliseconds or seconds, value of GT/SA is + in milliseconds. 1ms is default. Range of IA from 1ms to 448s, Range of GT/SA is + 1ms to 10ms, except for 9ms. 9ms has no valid encoding in the MSR definition. +**/ + UINT32 TdcTimeWindow[6]; + +/** Offset 0x071C - Reserved +**/ + UINT8 Reserved37[128]; + +/** Offset 0x079C - Disable Fast Slew Rate for Deep Package C States for VR domains + This option needs to be configured to reduce acoustic noise during deeper C states. + False: Don't disable Fast ramp during deeper C states; True: Disable Fast ramp + during deeper C state. [0] for IA, [1] for GT, [2] for SA, [3] through [5] are + Reserved. <b>0: False</b>; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisable[6]; + +/** Offset 0x07A2 - Slew Rate configuration for Deep Package C States for VR domains + Set VR IA/GT/SA Slow Slew Rate for Deep Package C State ramp time; Slow slew rate + equals to Fast divided by number, the number is 2, 4, 8, 16 to slow down the slew + rate to help minimize acoustic noise; divide by 16 is disabled for GT/SA. <b>0: + Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16; 0xFF: Ignore the configuration + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16, 0xFF: Ignore the configuration +**/ + UINT8 SlowSlewRate[6]; + +/** Offset 0x07A8 - Reserved +**/ + UINT8 Reserved38[26]; + +/** Offset 0x07C2 - VR Fast Vmode ICC Limit support + Voltage Regulator Fast Vmode ICC Limit. A value of 400 = 100A. A value of 0 corresponds + to feature disabled (no reactive protection). This value represents the current + threshold where the VR would initiate reactive protection if Fast Vmode is enabled. + The value is represented in 1/4 A increments. Range 0-2040. [0] for IA, [1] for + GT, [2] for SA, [3] through [5] are Reserved. +**/ + UINT16 IccLimit[6]; + +/** Offset 0x07CE - Enable/Disable VR FastVmode. The VR will initiate reactive protection if Fast Vmode is enabled. + Enable/Disable VR FastVmode; 0: Disable; <b>1: Enable</b>. For all VR by domain + 0: Disable, 1: Enable +**/ + UINT8 EnableFastVmode[6]; + +/** Offset 0x07D4 - Enable CEP + Enable/Disable CEP (Current Excursion Protection) Support. 0: Disable; <b>1: Enable</b>. + [0] for IA, [1] for GT, [2] for SA, [3] through [5] are Reserved. + $EN_DIS +**/ + UINT8 CepEnable[6]; + +/** Offset 0x07DA - Reserved +**/ + UINT8 Reserved39[146]; + +/** Offset 0x086C - BiosGuard + Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable + $EN_DIS +**/ + UINT8 BiosGuard; + +/** Offset 0x086D +**/ + UINT8 BiosGuardToolsInterface; + +/** Offset 0x086E - Txt + Enables utilization of additional hardware capabilities provided by Intel (R) Trusted + Execution Technology. Changes require a full power cycle to take effect. <b>0: + Disable</b>, 1: Enable + $EN_DIS +**/ + UINT8 Txt; + +/** Offset 0x086F - Reserved +**/ + UINT8 Reserved40; + +/** Offset 0x0870 - PrmrrSize + Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable +**/ + UINT32 PrmrrSize; + +/** Offset 0x0874 - SinitMemorySize + Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +**/ + UINT32 SinitMemorySize; + +/** Offset 0x0878 - Reserved +**/ + UINT8 Reserved41[8]; + +/** Offset 0x0880 - TxtDprMemoryBase + Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable +**/ + UINT64 TxtDprMemoryBase; + +/** Offset 0x0888 - TxtHeapMemorySize + Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable +**/ + UINT32 TxtHeapMemorySize; + +/** Offset 0x088C - TxtDprMemorySize + Reserve DPR memory size (0-255) MB. 0: Disable, define default value of TxtDprMemorySize + , 1: enable +**/ + UINT32 TxtDprMemorySize; + +/** Offset 0x0890 - BiosAcmBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 BiosAcmBase; + +/** Offset 0x0894 - BiosAcmSize + Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable +**/ + UINT32 BiosAcmSize; + +/** Offset 0x0898 - ApStartupBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 ApStartupBase; + +/** Offset 0x089C - TgaSize + Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable +**/ + UINT32 TgaSize; + +/** Offset 0x08A0 - TxtLcpPdBase + Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable +**/ + UINT64 TxtLcpPdBase; + +/** Offset 0x08A8 - TxtLcpPdSize + Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable +**/ + UINT64 TxtLcpPdSize; + +/** Offset 0x08B0 - IsTPMPresence + IsTPMPresence default values +**/ + UINT8 IsTPMPresence; + +/** Offset 0x08B1 - Reserved +**/ + UINT8 Reserved42[32]; + +/** Offset 0x08D1 - Enable PCH HSIO PCIE Rx Set Ctle + Enable PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtleEnable[28]; + +/** Offset 0x08ED - PCH HSIO PCIE Rx Set Ctle Value + PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtle[28]; + +/** Offset 0x0909 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[28]; + +/** Offset 0x0925 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmp[28]; + +/** Offset 0x0941 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[28]; + +/** Offset 0x095D - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmp[28]; + +/** Offset 0x0979 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[28]; + +/** Offset 0x0995 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmp[28]; + +/** Offset 0x09B1 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DeEmphEnable[28]; + +/** Offset 0x09CD - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value + PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen1DeEmph[28]; + +/** Offset 0x09E9 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[28]; + +/** Offset 0x0A05 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5[28]; + +/** Offset 0x0A21 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[28]; + +/** Offset 0x0A3D - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0[28]; + +/** Offset 0x0A59 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; + +/** Offset 0x0A61 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen1EqBoostMag[8]; + +/** Offset 0x0A69 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; + +/** Offset 0x0A71 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen2EqBoostMag[8]; + +/** Offset 0x0A79 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; + +/** Offset 0x0A81 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen3EqBoostMag[8]; + +/** Offset 0x0A89 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; + +/** Offset 0x0A91 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmp[8]; + +/** Offset 0x0A99 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; + +/** Offset 0x0AA1 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmp[8]; + +/** Offset 0x0AA9 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; + +/** Offset 0x0AB1 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmp[8]; + +/** Offset 0x0AB9 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DeEmphEnable[8]; + +/** Offset 0x0AC1 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen1DeEmph[8]; + +/** Offset 0x0AC9 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DeEmphEnable[8]; + +/** Offset 0x0AD1 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen2DeEmph[8]; + +/** Offset 0x0AD9 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DeEmphEnable[8]; + +/** Offset 0x0AE1 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen3DeEmph[8]; + +/** Offset 0x0AE9 - PCH LPC Enhance the port 8xh decoding + Original LPC only decodes one byte of port 80h. + $EN_DIS +**/ + UINT8 PchLpcEnhancePort8xhDecoding; + +/** Offset 0x0AEA - PCH Port80 Route + Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. + $EN_DIS +**/ + UINT8 PchPort80Route; + +/** Offset 0x0AEB - Enable SMBus ARP support + Enable SMBus ARP support. + $EN_DIS +**/ + UINT8 SmbusArpEnable; + +/** Offset 0x0AEC - Number of RsvdSmbusAddressTable. + The number of elements in the RsvdSmbusAddressTable. +**/ + UINT8 PchNumRsvdSmbusAddresses; + +/** Offset 0x0AED - Reserved +**/ + UINT8 Reserved43; + +/** Offset 0x0AEE - SMBUS Base Address + SMBUS Base Address (IO space). +**/ + UINT16 PchSmbusIoBase; + +/** Offset 0x0AF0 - Enable SMBus Alert Pin + Enable SMBus Alert Pin. + $EN_DIS +**/ + UINT8 PchSmbAlertEnable; + +/** Offset 0x0AF1 - Usage type for SOC/IOE ClkSrc + 0-23: PCIe rootport, 0x70:LAN, 0x80: unspecified but in use (free running), 0xFF: not used +**/ + UINT8 PcieClkSrcUsage[16]; + +/** Offset 0x0B01 - Reserved +**/ + UINT8 Reserved44[16]; + +/** Offset 0x0B11 - SOC/IOE ClkReq-to-ClkSrc mapping + Number of ClkReq signal assigned to ClkSrc +**/ + UINT8 PcieClkSrcClkReq[16]; + +/** Offset 0x0B21 - Reserved +**/ + UINT8 Reserved45[55]; + +/** Offset 0x0B58 - Enable PCH PCIE RP Mask + Enable/disable PCH PCIE Root Ports. 0: disable, 1: enable. One bit for each port, + bit0 for port1, bit1 for port2, and so on. +**/ + UINT32 PchPcieRpEnableMask; + +/** Offset 0x0B5C - Enable SOC/IOE PCIE RP Mask + Enable/disable SOC/IOE PCIE Root Ports. 0: disable, 1: enable. One bit for each + port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT16 PcieRpEnableMask; + +/** Offset 0x0B5E - VC Type + Virtual Channel Type Select: 0: VC0, 1: VC1. + 0: VC0, 1: VC1 +**/ + UINT8 PchHdaVcType; + +/** Offset 0x0B5F - Universal Audio Architecture compliance for DSP enabled system + 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox + driver or SST driver supported). + $EN_DIS +**/ + UINT8 PchHdaDspUaaCompliance; + +/** Offset 0x0B60 - Enable HD Audio Link + Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkHdaEnable; + +/** Offset 0x0B61 - Enable HDA SDI lanes + Enable/disable HDA SDI lanes. +**/ + UINT8 PchHdaSdiEnable[2]; + +/** Offset 0x0B63 - HDA Power/Clock Gating (PGD/CGD) + Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1: + FORCE_ENABLE, 2: FORCE_DISABLE. + 0: POR, 1: Force Enable, 2: Force Disable +**/ + UINT8 PchHdaTestPowerClockGating; + +/** Offset 0x0B64 - Enable HD Audio DMIC_N Link + Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. +**/ + UINT8 PchHdaAudioLinkDmicEnable[2]; + +/** Offset 0x0B66 - Reserved +**/ + UINT8 Reserved46[2]; + +/** Offset 0x0B68 - DMIC<N> ClkA Pin Muxing (N - DMIC number) + Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_* +**/ + UINT32 PchHdaAudioLinkDmicClkAPinMux[2]; + +/** Offset 0x0B70 - DMIC<N> ClkB Pin Muxing + Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKB_* +**/ + UINT32 PchHdaAudioLinkDmicClkBPinMux[2]; + +/** Offset 0x0B78 - Enable HD Audio DSP + Enable/disable HD Audio DSP feature. + $EN_DIS +**/ + UINT8 PchHdaDspEnable; + +/** Offset 0x0B79 - Reserved +**/ + UINT8 Reserved47[3]; + +/** Offset 0x0B7C - DMIC<N> Data Pin Muxing + Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_* +**/ + UINT32 PchHdaAudioLinkDmicDataPinMux[2]; + +/** Offset 0x0B84 - Enable HD Audio SSP0 Link + Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 +**/ + UINT8 PchHdaAudioLinkSspEnable[6]; + +/** Offset 0x0B8A - Enable HD Audio SoundWire#N Link + Enable/disable HD Audio SNDW#N link. Muxed with HDA. +**/ + UINT8 PchHdaAudioLinkSndwEnable[4]; + +/** Offset 0x0B8E - iDisp-Link Frequency + iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. + 4: 96MHz, 3: 48MHz +**/ + UINT8 PchHdaIDispLinkFrequency; + +/** Offset 0x0B8F - Reserved +**/ + UINT8 Reserved48; + +/** Offset 0x0B90 - iDisp-Link T-mode + iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T + 0: 2T, 2: 4T, 3: 8T, 4: 16T +**/ + UINT8 PchHdaIDispLinkTmode; + +/** Offset 0x0B91 - iDisplay Audio Codec disconnection + 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. + $EN_DIS +**/ + UINT8 PchHdaIDispCodecDisconnect; + +/** Offset 0x0B92 - Reserved +**/ + UINT8 Reserved49[6]; + +/** Offset 0x0B98 - CNVi DDR RFI Mitigation + Enable/Disable DDR RFI Mitigation. Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviDdrRfim; + +/** Offset 0x0B99 - Reserved +**/ + UINT8 Reserved50[11]; + +/** Offset 0x0BA4 - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x0BA5 - Serial Io Uart Debug Controller Number + Select SerialIo Uart Controller for debug. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 SerialIoUartDebugControllerNumber; + +/** Offset 0x0BA6 - Serial Io Uart Debug Auto Flow + Enables UART hardware flow control, CTS and RTS lines. + $EN_DIS +**/ + UINT8 SerialIoUartDebugAutoFlow; + +/** Offset 0x0BA7 - Reserved +**/ + UINT8 Reserved51; + +/** Offset 0x0BA8 - Serial Io Uart Debug BaudRate + Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, + 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 +**/ + UINT32 SerialIoUartDebugBaudRate; + +/** Offset 0x0BAC - Serial Io Uart Debug Parity + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartDebugParity; + +/** Offset 0x0BAD - Serial Io Uart Debug Stop Bits + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 SerialIoUartDebugStopBits; + +/** Offset 0x0BAE - Serial Io Uart Debug Data Bits + Set default word length. 0: Default, 5,6,7,8 + 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS +**/ + UINT8 SerialIoUartDebugDataBits; + +/** Offset 0x0BAF - Reserved +**/ + UINT8 Reserved52; + +/** Offset 0x0BB0 - Serial Io Uart Debug Mmio Base + Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode + = SerialIoUartPci. +**/ + UINT32 SerialIoUartDebugMmioBase; + +/** Offset 0x0BB4 - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x0BB5 - Reserved +**/ + UINT8 Reserved53; + +/** Offset 0x0BB6 - Ring PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 +**/ + UINT8 RingPllVoltageOffset; + +/** Offset 0x0BB7 - System Agent PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 +**/ + UINT8 SaPllVoltageOffset; + +/** Offset 0x0BB8 - Reserved +**/ + UINT8 Reserved54; + +/** Offset 0x0BB9 - Memory Controller PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 +**/ + UINT8 McPllVoltageOffset; + +/** Offset 0x0BBA - TCSS Thunderbolt PCIE Root Port 0 Enable + Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie0En; + +/** Offset 0x0BBB - TCSS Thunderbolt PCIE Root Port 1 Enable + Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie1En; + +/** Offset 0x0BBC - TCSS Thunderbolt PCIE Root Port 2 Enable + Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie2En; + +/** Offset 0x0BBD - TCSS Thunderbolt PCIE Root Port 3 Enable + Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie3En; + +/** Offset 0x0BBE - TCSS USB HOST (xHCI) Enable + Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below + $EN_DIS +**/ + UINT8 TcssXhciEn; + +/** Offset 0x0BBF - TCSS USB DEVICE (xDCI) Enable + Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled + $EN_DIS +**/ + UINT8 TcssXdciEn; + +/** Offset 0x0BC0 - TCSS DMA0 Enable + Set TCSS DMA0. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssDma0En; + +/** Offset 0x0BC1 - TCSS DMA1 Enable + Set TCSS DMA1. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssDma1En; + +/** Offset 0x0BC2 - PcdSerialDebugBaudRate + Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. + 3:9600, 4:19200, 6:56700, 7:115200 +**/ + UINT8 PcdSerialDebugBaudRate; + +/** Offset 0x0BC3 - HobBufferSize + Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB + total HOB size). + 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value +**/ + UINT8 HobBufferSize; + +/** Offset 0x0BC4 - Early Command Training + Enables/Disable Early Command Training + $EN_DIS +**/ + UINT8 ECT; + +/** Offset 0x0BC5 - SenseAmp Offset Training + Enables/Disable SenseAmp Offset Training + $EN_DIS +**/ + UINT8 SOT; + +/** Offset 0x0BC6 - Early ReadMPR Timing Centering 2D + Enables/Disable Early ReadMPR Timing Centering 2D + $EN_DIS +**/ + UINT8 ERDMPRTC2D; + +/** Offset 0x0BC7 - Read MPR Training + Enables/Disable Read MPR Training + $EN_DIS +**/ + UINT8 RDMPRT; + +/** Offset 0x0BC8 - Receive Enable Training + Enables/Disable Receive Enable Training + $EN_DIS +**/ + UINT8 RCVET; + +/** Offset 0x0BC9 - Jedec Write Leveling + Enables/Disable Jedec Write Leveling + $EN_DIS +**/ + UINT8 JWRL; + +/** Offset 0x0BCA - Early Write Time Centering 2D + Enables/Disable Early Write Time Centering 2D + $EN_DIS +**/ + UINT8 EWRTC2D; + +/** Offset 0x0BCB - Early Read Time Centering 2D + Enables/Disable Early Read Time Centering 2D + $EN_DIS +**/ + UINT8 ERDTC2D; + +/** Offset 0x0BCC - Reserved +**/ + UINT8 Reserved55; + +/** Offset 0x0BCD - Write Timing Centering 1D + Enables/Disable Write Timing Centering 1D + $EN_DIS +**/ + UINT8 WRTC1D; + +/** Offset 0x0BCE - Write Voltage Centering 1D + Enables/Disable Write Voltage Centering 1D + $EN_DIS +**/ + UINT8 WRVC1D; + +/** Offset 0x0BCF - Read Timing Centering 1D + Enables/Disable Read Timing Centering 1D + $EN_DIS +**/ + UINT8 RDTC1D; + +/** Offset 0x0BD0 - Read Voltage Centering 1D + Enable/Disable Read Voltage Centering 1D + $EN_DIS +**/ + UINT8 RDVC1D; + +/** Offset 0x0BD1 - Reserved +**/ + UINT8 Reserved56[10]; + +/** Offset 0x0BDB - Read Equalization Training + Enables/Disable Read Equalization Training + $EN_DIS +**/ + UINT8 RDEQT; + +/** Offset 0x0BDC - Reserved +**/ + UINT8 Reserved57[2]; + +/** Offset 0x0BDE - Write Timing Centering 2D + Enables/Disable Write Timing Centering 2D + $EN_DIS +**/ + UINT8 WRTC2D; + +/** Offset 0x0BDF - Read Timing Centering 2D + Enables/Disable Read Timing Centering 2D + $EN_DIS +**/ + UINT8 RDTC2D; + +/** Offset 0x0BE0 - Write Voltage Centering 2D + Enables/Disable Write Voltage Centering 2D + $EN_DIS +**/ + UINT8 WRVC2D; + +/** Offset 0x0BE1 - Read Voltage Centering 2D + Enables/Disable Read Voltage Centering 2D + $EN_DIS +**/ + UINT8 RDVC2D; + +/** Offset 0x0BE2 - Reserved +**/ + UINT8 Reserved58; + +/** Offset 0x0BE3 - Command Voltage Centering + Enables/Disable Command Voltage Centering + $EN_DIS +**/ + UINT8 CMDVC; + +/** Offset 0x0BE4 - Late Command Training + Enables/Disable Late Command Training + $EN_DIS +**/ + UINT8 LCT; + +/** Offset 0x0BE5 - Turn Around Timing Training + Enables/Disable Turn Around Timing Training + $EN_DIS +**/ + UINT8 TAT; + +/** Offset 0x0BE6 - Rank Margin Tool + Enable/disable Rank Margin Tool + $EN_DIS +**/ + UINT8 RMT; + +/** Offset 0x0BE7 - Reserved +**/ + UINT8 Reserved59; + +/** Offset 0x0BE8 - DIMM SPD Alias Test + Enables/Disable DIMM SPD Alias Test + $EN_DIS +**/ + UINT8 ALIASCHK; + +/** Offset 0x0BE9 - Retrain Margin Check + Enables/Disable Retrain Margin Check + $EN_DIS +**/ + UINT8 RMC; + +/** Offset 0x0BEA - Row Hammering Prevention + Enables/Disable Row Hammering Prevention + $EN_DIS +**/ + UINT8 ROWHAMMER; + +/** Offset 0x0BEB - Dimm ODT Training + Enables/Disable Dimm ODT Training + $EN_DIS +**/ + UINT8 DIMMODTT; + +/** Offset 0x0BEC - DIMM RON Training + Enables/Disable DIMM RON Training + $EN_DIS +**/ + UINT8 DIMMRONT; + +/** Offset 0x0BED - TxDqTCO Comp Training + Enable/Disable TxDqTCO Comp Training + $EN_DIS +**/ + UINT8 TXTCO; + +/** Offset 0x0BEE - ClkTCO Comp Training + Enable/Disable ClkTCO Comp Training + $EN_DIS +**/ + UINT8 CLKTCO; + +/** Offset 0x0BEF - CMD Slew Rate Training + Enable/Disable CMD Slew Rate Training + $EN_DIS +**/ + UINT8 CMDSR; + +/** Offset 0x0BF0 - Reserved +**/ + UINT8 Reserved60[2]; + +/** Offset 0x0BF2 - DIMM CA ODT Training + Enable/Disable DIMM CA ODT Training + $EN_DIS +**/ + UINT8 DIMMODTCA; + +/** Offset 0x0BF3 - Reserved +**/ + UINT8 Reserved61[3]; + +/** Offset 0x0BF6 - Read Vref Decap Training + Enable/Disable Read Vref Decap Training + $EN_DIS +**/ + UINT8 RDVREFDC; + +/** Offset 0x0BF7 - Vddq Training + Enable/Disable Vddq Training + $EN_DIS +**/ + UINT8 VDDQT; + +/** Offset 0x0BF8 - Rank Margin Tool Per Bit + Enable/Disable Rank Margin Tool Per Bit + $EN_DIS +**/ + UINT8 RMTBIT; + +/** Offset 0x0BF9 - Reserved +**/ + UINT8 Reserved62[4]; + +/** Offset 0x0BFD - Duty Cycle Correction Training + Enable/Disable Duty Cycle Correction Training + $EN_DIS +**/ + UINT8 DCC; + +/** Offset 0x0BFE - Reserved +**/ + UINT8 Reserved63[17]; + +/** Offset 0x0C0F - ECC Support + Enables/Disable ECC Support + $EN_DIS +**/ + UINT8 EccSupport; + +/** Offset 0x0C10 - Ibecc + In-Band ECC Support + $EN_DIS +**/ + UINT8 Ibecc; + +/** Offset 0x0C11 - IbeccParity + In-Band ECC Parity Control + $EN_DIS +**/ + UINT8 IbeccParity; + +/** Offset 0x0C12 - IbeccOperationMode + In-Band ECC Operation Mode + 0:Protect base on address range, 1: Non-protected, 2: All protected +**/ + UINT8 IbeccOperationMode; + +/** Offset 0x0C13 - IbeccProtectedRegionEnable + In-Band ECC Protected Region Enable + $EN_DIS +**/ + UINT8 IbeccProtectedRegionEnable[8]; + +/** Offset 0x0C1B - Reserved +**/ + UINT8 Reserved64; + +/** Offset 0x0C1C - IbeccProtectedRegionBases + IBECC Protected Region Bases per IBECC instance +**/ + UINT16 IbeccProtectedRegionBase[8]; + +/** Offset 0x0C2C - IbeccProtectedRegionMasks + IBECC Protected Region Masks +**/ + UINT16 IbeccProtectedRegionMask[8]; + +/** Offset 0x0C3C - IbeccProtectedRegionOverallBases + IBECC Protected Region Bases based on enabled IBECC instance +**/ + UINT16 IbeccProtectedRegionOverallBase[8]; + +/** Offset 0x0C4C - Memory Remap + Enables/Disable Memory Remap + $EN_DIS +**/ + UINT8 RemapEnable; + +/** Offset 0x0C4D - Rank Interleave support + Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at + the same time. + $EN_DIS +**/ + UINT8 RankInterleave; + +/** Offset 0x0C4E - Enhanced Interleave support + Enables/Disable Enhanced Interleave support + $EN_DIS +**/ + UINT8 EnhancedInterleave; + +/** Offset 0x0C4F - Ch Hash Support + Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode + $EN_DIS +**/ + UINT8 ChHashEnable; + +/** Offset 0x0C50 - Extern Therm Status + Enables/Disable Extern Therm Status + $EN_DIS +**/ + UINT8 EnableExtts; + +/** Offset 0x0C51 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDn; + +/** Offset 0x0C52 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDnLpddr; + +/** Offset 0x0C53 - SelfRefresh Enable + Enables/Disable SelfRefresh Enable + $EN_DIS +**/ + UINT8 SrefCfgEna; + +/** Offset 0x0C54 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeatLpddr; + +/** Offset 0x0C55 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeat; + +/** Offset 0x0C56 - Row Hammer Select + Row Hammer Select + 0:Disable, 1:RFM, 2:pTRR +**/ + UINT8 RhSelect; + +/** Offset 0x0C57 - Exit On Failure (MRC) + Enables/Disable Exit On Failure (MRC) + $EN_DIS +**/ + UINT8 ExitOnFailure; + +/** Offset 0x0C58 - Reserved +**/ + UINT8 Reserved65[4]; + +/** Offset 0x0C5C - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedZq; + +/** Offset 0x0C5D - Ch Hash Interleaved Bit + Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave + the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 + 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 +**/ + UINT8 ChHashInterleaveBit; + +/** Offset 0x0C5E - Ch Hash Mask + Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to + BITS [19:6] Default is 0x30CC +**/ + UINT16 ChHashMask; + +/** Offset 0x0C60 - Base reference clock value + Base reference clock value, in Hertz(Default is 125Hz) + 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz +**/ + UINT32 BClkFrequency; + +/** Offset 0x0C64 - EPG DIMM Idd3N + Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on + a per DIMM basis. Default is 26 +**/ + UINT16 Idd3n; + +/** Offset 0x0C66 - EPG DIMM Idd3P + Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated + on a per DIMM basis. Default is 11 +**/ + UINT16 Idd3p; + +/** Offset 0x0C68 - CMD Normalization + Enable/Disable CMD Normalization + $EN_DIS +**/ + UINT8 CMDNORM; + +/** Offset 0x0C69 - Early DQ Write Drive Strength and Equalization Training + Enable/Disable Early DQ Write Drive Strength and Equalization Training + $EN_DIS +**/ + UINT8 EWRDSEQ; + +/** Offset 0x0C6A - Idle Energy Mc0Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch0Dimm0; + +/** Offset 0x0C6B - Idle Energy Mc0Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch0Dimm1; + +/** Offset 0x0C6C - Idle Energy Mc0Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch1Dimm0; + +/** Offset 0x0C6D - Idle Energy Mc0Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch1Dimm1; + +/** Offset 0x0C6E - Idle Energy Mc1Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch0Dimm0; + +/** Offset 0x0C6F - Idle Energy Mc1Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch0Dimm1; + +/** Offset 0x0C70 - Idle Energy Mc1Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch1Dimm0; + +/** Offset 0x0C71 - Idle Energy Mc1Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch1Dimm1; + +/** Offset 0x0C72 - PowerDown Energy Mc0Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch0Dimm0; + +/** Offset 0x0C73 - PowerDown Energy Mc0Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch0Dimm1; + +/** Offset 0x0C74 - PowerDown Energy Mc0Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch1Dimm0; + +/** Offset 0x0C75 - PowerDown Energy Mc0Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch1Dimm1; + +/** Offset 0x0C76 - PowerDown Energy Mc1Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch0Dimm0; + +/** Offset 0x0C77 - PowerDown Energy Mc1Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch0Dimm1; + +/** Offset 0x0C78 - PowerDown Energy Mc1Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch1Dimm0; + +/** Offset 0x0C79 - PowerDown Energy Mc1Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch1Dimm1; + +/** Offset 0x0C7A - Activate Energy Mc0Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch0Dimm0; + +/** Offset 0x0C7B - Activate Energy Mc0Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch0Dimm1; + +/** Offset 0x0C7C - Activate Energy Mc0Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch1Dimm0; + +/** Offset 0x0C7D - Activate Energy Mc0Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch1Dimm1; + +/** Offset 0x0C7E - Activate Energy Mc1Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch0Dimm0; + +/** Offset 0x0C7F - Activate Energy Mc1Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch0Dimm1; + +/** Offset 0x0C80 - Activate Energy Mc1Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch1Dimm0; + +/** Offset 0x0C81 - Activate Energy Mc1Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch1Dimm1; + +/** Offset 0x0C82 - Read Energy Mc0Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch0Dimm0; + +/** Offset 0x0C83 - Read Energy Mc0Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch0Dimm1; + +/** Offset 0x0C84 - Read Energy Mc0Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch1Dimm0; + +/** Offset 0x0C85 - Read Energy Mc0Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch1Dimm1; + +/** Offset 0x0C86 - Read Energy Mc1Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch0Dimm0; + +/** Offset 0x0C87 - Read Energy Mc1Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch0Dimm1; + +/** Offset 0x0C88 - Read Energy Mc1Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch1Dimm0; + +/** Offset 0x0C89 - Read Energy Mc1Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch1Dimm1; + +/** Offset 0x0C8A - Write Energy Mc0Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch0Dimm0; + +/** Offset 0x0C8B - Write Energy Mc0Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch0Dimm1; + +/** Offset 0x0C8C - Write Energy Mc0Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch1Dimm0; + +/** Offset 0x0C8D - Write Energy Mc0Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch1Dimm1; + +/** Offset 0x0C8E - Write Energy Mc1Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch0Dimm0; + +/** Offset 0x0C8F - Write Energy Mc1Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch0Dimm1; + +/** Offset 0x0C90 - Write Energy Mc1Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch1Dimm0; + +/** Offset 0x0C91 - Write Energy Mc1Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch1Dimm1; + +/** Offset 0x0C92 - Throttler CKEMin Timer + Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). + Dfault is 0x00 +**/ + UINT8 ThrtCkeMinTmr; + +/** Offset 0x0C93 - Reserved +**/ + UINT8 Reserved66[2]; + +/** Offset 0x0C95 - Rapl Power Floor Ch0 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh0; + +/** Offset 0x0C96 - Rapl Power Floor Ch1 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh1; + +/** Offset 0x0C97 - Command Rate Support + CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs + 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS +**/ + UINT8 EnCmdRate; + +/** Offset 0x0C98 - MC_REFRESH_RATE + Type of Refresh Rate used to prevent Row Hammer. Default is NORMAL Refresh + 0:NORMAL Refresh, 1:1x Refresh, 2:2x Refresh, 3:4x Refresh +**/ + UINT8 McRefreshRate; + +/** Offset 0x0C99 - Energy Performance Gain + Enable/disable Energy Performance Gain. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 EpgEnable; + +/** Offset 0x0C9A - RH pTRR LFSR0 Mask + Row Hammer pTRR LFSR0 Mask, 1/2^(value) +**/ + UINT8 Lfsr0Mask; + +/** Offset 0x0C9B - User Manual Threshold + Disabled: Predefined threshold will be used.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserThresholdEnable; + +/** Offset 0x0C9C - User Manual Budget + Disabled: Configuration of memories will defined the Budget value.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserBudgetEnable; + +/** Offset 0x0C9D - Reserved +**/ + UINT8 Reserved67; + +/** Offset 0x0C9E - Power Down Mode + This option controls command bus tristating during idle periods + 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto +**/ + UINT8 PowerDownMode; + +/** Offset 0x0C9F - Pwr Down Idle Timer + The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means + AUTO: 64 for ULX/ULT, 128 for DT/Halo +**/ + UINT8 PwdwnIdleCounter; + +/** Offset 0x0CA0 - Page Close Idle Timeout + This option controls Page Close Idle Timeout + 0:Enabled, 1:Disabled +**/ + UINT8 DisPgCloseIdleTimeout; + +/** Offset 0x0CA1 - Bitmask of ranks that have CA bus terminated + Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, + Rank0 is terminating and Rank1 is non-terminating</b> +**/ + UINT8 CmdRanksTerminated; + +/** Offset 0x0CA2 - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x0CA3 - Reserved +**/ + UINT8 Reserved68[8]; + +/** Offset 0x0CAB - Ask MRC to clear memory content + Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. + $EN_DIS +**/ + UINT8 CleanMemory; + +/** Offset 0x0CAC - TCSS USB Port Enable + Bitmap for per port enabling +**/ + UINT8 UsbTcPortEnPreMem; + +/** Offset 0x0CAD - Reserved +**/ + UINT8 Reserved69; + +/** Offset 0x0CAE - Post Code Output Port + This option configures Post Code Output Port +**/ + UINT16 PostCodeOutputPort; + +/** Offset 0x0CB0 - RMTLoopCount + Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO +**/ + UINT8 RMTLoopCount; + +/** Offset 0x0CB1 - Enable/Disable SA CRID + Enable: SA CRID, Disable (Default): SA CRID + $EN_DIS +**/ + UINT8 CridEnable; + +/** Offset 0x0CB2 - Reserved +**/ + UINT8 Reserved70[2]; + +/** Offset 0x0CB4 - BCLK RFI Frequency + Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No + RFI Tuning</b>. Range is 98Mhz-100Mhz. +**/ + UINT32 BclkRfiFreq[4]; + +/** Offset 0x0CC4 - Size of PCIe IMR. + Size of PCIe IMR in megabytes +**/ + UINT16 PcieImrSize; + +/** Offset 0x0CC6 - Enable PCIe IMR + 0: Disable(AUTO), 1: Enable + $EN_DIS +**/ + UINT8 PcieImrEnabled; + +/** Offset 0x0CC7 - Enable PCIe IMR + 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select + the Root port location from PCH PCIe or SA PCIe + $EN_DIS +**/ + UINT8 PcieImrRpLocation; + +/** Offset 0x0CC8 - Root port number for IMR. + Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port + from 0 to 23 and if it is SA PCIe then select root port from 0 to 3 +**/ + UINT8 PcieImrRpSelection; + +/** Offset 0x0CC9 - SerialDebugMrcLevel + MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 SerialDebugMrcLevel; + +/** Offset 0x0CCA - Reserved +**/ + UINT8 Reserved71[11]; + +/** Offset 0x0CD5 - RH pTRR LFSR1 Mask + Row Hammer pTRR LFSR1 Mask, 1/2^(value) +**/ + UINT8 Lfsr1Mask; + +/** Offset 0x0CD6 - Reserved +**/ + UINT8 Reserved72; + +/** Offset 0x0CD7 - Command Pins Mapping + BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller + 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending. +**/ + UINT8 Lp5CccConfig; + +/** Offset 0x0CD8 - Command Pins Mirrored + BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller + 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror. +**/ + UINT8 CmdMirror; + +/** Offset 0x0CD9 - Reserved +**/ + UINT8 Reserved73[3]; + +/** Offset 0x0CDC - LowerBasicMemTestSize + Reduce BasicMemoryTest size WA: 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 LowerBasicMemTestSize; + +/** Offset 0x0CDD - Reserved +**/ + UINT8 Reserved74[20]; + +/** Offset 0x0CF1 - Skip external display device scanning + Enable: Do not scan for external display device, Disable (Default): Scan external + display devices + $EN_DIS +**/ + UINT8 SkipExtGfxScan; + +/** Offset 0x0CF2 - Generate BIOS Data ACPI Table + Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it + $EN_DIS +**/ + UINT8 BdatEnable; + +/** Offset 0x0CF3 - Lock PCU Thermal Management registers + Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 LockPTMregs; + +/** Offset 0x0CF4 - Panel Power Enable + Control for enabling/disabling VDD force bit (Required only for early enabling of + eDP panel). 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 PanelPowerEnable; + +/** Offset 0x0CF5 - BdatTestType + Indicates the type of Memory Training data to populate into the BDAT ACPI table. + 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D +**/ + UINT8 BdatTestType; + +/** Offset 0x0CF6 - Reserved +**/ + UINT8 Reserved75[2]; + +/** Offset 0x0CF8 - PMR Size + Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot +**/ + UINT32 DmaBufferSize; + +/** Offset 0x0CFC - The policy for VTd driver behavior + BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS +**/ + UINT8 PreBootDmaMask; + +/** Offset 0x0CFD - Reserved +**/ + UINT8 Reserved76[5]; + +/** Offset 0x0D02 - Platform LID Status for LFP Displays. + LFP Display Lid Status (LID_STATUS enum): 0 (Default): LidClosed, 1: LidOpen. + 0: LidClosed, 1: LidOpen +**/ + UINT8 LidStatus; + +/** Offset 0x0D03 - Control VGA Initialition sequence + Initialise VGA Init, Set BIT0 - 0 (No VGA Support), BIT0 = 1 (VGA Supported) BIT1 + = 1 (VGA Exit) + 0x0: NO VGA Init, 0x1: VGA Init, 0x3: VGA Init and VGA Exit +**/ + UINT8 VgaInitControl; + +/** Offset 0x0D04 - Graphics Configuration Ptr + Points to VBT +**/ + UINT32 VbtPtr; + +/** Offset 0x0D08 - Intel Graphics VBT (Video BIOS Table) Size + Size of Graphics VBT Image +**/ + UINT32 VbtSize; + +/** Offset 0x0D0C - VGA Training Message Pointer + Points to VGA Message Array +**/ + UINT32 VgaMessage; + +/** Offset 0x0D10 - Reserved +**/ + UINT8 Reserved77[124]; + +/** Offset 0x0D8C - TotalFlashSize + Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable +**/ + UINT16 TotalFlashSize; + +/** Offset 0x0D8E - BiosSize + The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard != + 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected + Range) so that a BIOS Update Script can be stored in the DPR. +**/ + UINT16 BiosSize; + +/** Offset 0x0D90 - Reserved +**/ + UINT8 Reserved78[28]; + +/** Offset 0x0DAC - Smbus dynamic power gating + Disable or Enable Smbus dynamic power gating. + $EN_DIS +**/ + UINT8 SmbusDynamicPowerGating; + +/** Offset 0x0DAD - Disable and Lock Watch Dog Register + Set 1 to clear WDT status, then disable and lock WDT registers. + $EN_DIS +**/ + UINT8 WdtDisableAndLock; + +/** Offset 0x0DAE - Reserved +**/ + UINT8 Reserved79[2]; + +/** Offset 0x0DB0 - SMBUS SPD Write Disable + Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write + Disable bit. For security recommendations, SPD write disable bit must be set. + $EN_DIS +**/ + UINT8 SmbusSpdWriteDisable; + +/** Offset 0x0DB1 - Reserved +**/ + UINT8 Reserved80[34]; + +/** Offset 0x0DD3 - HECI Timeouts + 0: Disable, 1: Enable (Default) timeout check for HECI + $EN_DIS +**/ + UINT8 HeciTimeouts; + +/** Offset 0x0DD4 - Force ME DID Init Status + Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set + ME DID init stat value + $EN_DIS +**/ + UINT8 DidInitStat; + +/** Offset 0x0DD5 - CPU Replaced Polling Disable + Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop + $EN_DIS +**/ + UINT8 DisableCpuReplacedPolling; + +/** Offset 0x0DD6 - Check HECI message before send + Test, 0: disable, 1: enable, Enable/Disable message check. + $EN_DIS +**/ + UINT8 DisableMessageCheck; + +/** Offset 0x0DD7 - Skip MBP HOB + Test, 0: disable, 1: enable, Enable/Disable sending MBP message and creating MBP Hob. + $EN_DIS +**/ + UINT8 SkipMbpHob; + +/** Offset 0x0DD8 - HECI2 Interface Communication + Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. + $EN_DIS +**/ + UINT8 HeciCommunication2; + +/** Offset 0x0DD9 - Enable KT device + Test, 0: POR, 1: enable, 2: disable, Enable or Disable KT device. + $EN_DIS +**/ + UINT8 KtDeviceEnable; + +/** Offset 0x0DDA - Skip CPU replacement check + Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check + $EN_DIS +**/ + UINT8 SkipCpuReplacementCheck; + +/** Offset 0x0DDB - Reserved +**/ + UINT8 Reserved81[100]; + +/** Offset 0x0E3F - Avx2 Voltage Guardband Scaling Factor + AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in + 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx2VoltageScaleFactor; + +/** Offset 0x0E40 - Avx512 Voltage Guardband Scaling Factor + DEPRECATED. AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range + is 0-200 in 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx512VoltageScaleFactor; + +/** Offset 0x0E41 - Serial Io Uart Debug Mode + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartDebugMode; + +/** Offset 0x0E42 - Reserved +**/ + UINT8 Reserved82[2]; + +/** Offset 0x0E44 - SerialIoUartDebugRxPinMux - FSPM + Select RX pin muxing for SerialIo UART used for debug +**/ + UINT32 SerialIoUartDebugRxPinMux; + +/** Offset 0x0E48 - SerialIoUartDebugTxPinMux - FSPM + Select TX pin muxing for SerialIo UART used for debug +**/ + UINT32 SerialIoUartDebugTxPinMux; + +/** Offset 0x0E4C - SerialIoUartDebugRtsPinMux - FSPM + Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartDebugRtsPinMux; + +/** Offset 0x0E50 - SerialIoUartDebugCtsPinMux - FSPM + Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 SerialIoUartDebugCtsPinMux; + +/** Offset 0x0E54 - Reserved +**/ + UINT8 Reserved83[164]; + +/** Offset 0x0EF8 - TME Exclude Base Address + TME Exclude Base Address. +**/ + UINT64 TmeExcludeBase; + +/** Offset 0x0F00 - TME Exclude Size Value + TME Exclude Size Value. +**/ + UINT64 TmeExcludeSize; + +/** Offset 0x0F08 - Generate New TME Key + Enable: Generate New TME Key, Disable(Default): TME key determine by type of reset + $EN_DIS +**/ + UINT8 GenerateNewTmeKey; + +/** Offset 0x0F09 - Reserved +**/ + UINT8 Reserved84[23]; +} FSP_M_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPM_ARCH2_UPD FspmArchUpd; + +/** Offset 0x0060 +**/ + FSP_M_CONFIG FspmConfig; + +/** Offset 0x0F20 +**/ + UINT8 Rsvd500[6]; + +/** Offset 0x0F26 +**/ + UINT16 UpdTerminator; +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspsUpd.h new file mode 100644 index 0000000000..45c411f6ff --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/FspsUpd.h @@ -0,0 +1,3174 @@ +/** @file + +Copyright (c) 2024, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/// +/// Azalia Header structure +/// +typedef struct { + UINT16 VendorId; ///< Codec Vendor ID + UINT16 DeviceId; ///< Codec Device ID + UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. + UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. + UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. + UINT32 Reserved; ///< Reserved for future use. Must be set to 0. +} AZALIA_HEADER; + +/// +/// Audio Azalia Verb Table structure +/// +typedef struct { + AZALIA_HEADER Header; ///< AZALIA PCH header + UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header +} AUDIO_AZALIA_VERB_TABLE; + +/// +/// Refer to the definition of PCH_INT_PIN +/// +typedef enum { + SiPchNoInt, ///< No Interrupt Pin + SiPchIntA, + SiPchIntB, + SiPchIntC, + SiPchIntD +} SI_PCH_INT_PIN; +/// +/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. +/// +typedef struct { + UINT8 Device; ///< Device number + UINT8 Function; ///< Device function + UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) + UINT8 Irq; ///< IRQ to be set for device. +} SI_PCH_DEVICE_INTERRUPT_CONFIG; + +#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices + + +/** Fsp S Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Logo Pointer + Points to PEI Display Logo Image +**/ + UINT64 LogoPtr; + +/** Offset 0x0048 - Logo Size + Size of PEI Display Logo Image +**/ + UINT32 LogoSize; + +/** Offset 0x004C - Reserved +**/ + UINT8 Reserved0[4]; + +/** Offset 0x0050 - Blt Buffer Address + Address of Blt buffer +**/ + UINT64 BltBufferAddress; + +/** Offset 0x0058 - Blt Buffer Size + Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of + EFI_GRAPHICS_OUTPUT_BLT_PIXEL) +**/ + UINT64 BltBufferSize; + +/** Offset 0x0060 - Graphics Configuration Ptr + Points to VBT +**/ + UINT64 GraphicsConfigPtr; + +/** Offset 0x0068 - Enable Device 4 + Enable/disable Device 4 + $EN_DIS +**/ + UINT8 Device4Enable; + +/** Offset 0x0069 - Show SPI controller + Enable/disable to show SPI controller. + $EN_DIS +**/ + UINT8 ShowSpiController; + +/** Offset 0x006A - Reserved +**/ + UINT8 Reserved1[6]; + +/** Offset 0x0070 - MicrocodeRegionBase + Memory Base of Microcode Updates +**/ + UINT64 MicrocodeRegionBase; + +/** Offset 0x0078 - MicrocodeRegionSize + Size of Microcode Updates +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x007C - Turbo Mode + Enable/Disable processor Turbo Mode. 0:disable, <b>1: Enable</b> + $EN_DIS +**/ + UINT8 TurboMode; + +/** Offset 0x007D - Enable SATA SALP Support + Enable/disable SATA Aggressive Link Power Management. + $EN_DIS +**/ + UINT8 SataSalpSupport; + +/** Offset 0x007E - Enable SATA ports + Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, + and so on. +**/ + UINT8 SataPortsEnable[8]; + +/** Offset 0x0086 - Enable SATA DEVSLP Feature + Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each + port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlp[8]; + +/** Offset 0x008E - Reserved +**/ + UINT8 Reserved2[34]; + +/** Offset 0x00B0 - Enable USB2 ports + Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb20Enable[16]; + +/** Offset 0x00C0 - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb30Enable[10]; + +/** Offset 0x00CA - Enable xDCI controller + Enable/disable to xDCI controller. + $EN_DIS +**/ + UINT8 XdciEnable; + +/** Offset 0x00CB - Reserved +**/ + UINT8 Reserved3; + +/** Offset 0x00CC - Address of PCH_DEVICE_INTERRUPT_CONFIG table. + The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. +**/ + UINT32 DevIntConfigPtr; + +/** Offset 0x00D0 - Number of DevIntConfig Entry + Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr + must not be NULL. +**/ + UINT8 NumOfDevIntConfig; + +/** Offset 0x00D1 - PIRQx to IRQx Map Config + PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for + PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy + 8259 PCI mode. +**/ + UINT8 PxRcConfig[8]; + +/** Offset 0x00D9 - Select GPIO IRQ Route + GPIO IRQ Select. The valid value is 14 or 15. +**/ + UINT8 GpioIrqRoute; + +/** Offset 0x00DA - Select SciIrqSelect + SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. +**/ + UINT8 SciIrqSelect; + +/** Offset 0x00DB - Select TcoIrqSelect + TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. +**/ + UINT8 TcoIrqSelect; + +/** Offset 0x00DC - Enable/Disable Tco IRQ + Enable/disable TCO IRQ + $EN_DIS +**/ + UINT8 TcoIrqEnable; + +/** Offset 0x00DD - PCH HDA Verb Table Entry Number + Number of Entries in Verb Table. +**/ + UINT8 PchHdaVerbTableEntryNum; + +/** Offset 0x00DE - Reserved +**/ + UINT8 Reserved4[2]; + +/** Offset 0x00E0 - PCH HDA Verb Table Pointer + Pointer to Array of pointers to Verb Table. +**/ + UINT64 PchHdaVerbTablePtr; + +/** Offset 0x00E8 - PCH HDA Codec Sx Wake Capability + Capability to detect wake initiated by a codec in Sx +**/ + UINT8 PchHdaCodecSxWakeCapability; + +/** Offset 0x00E9 - Enable SATA + Enable/disable SATA controller. + $EN_DIS +**/ + UINT8 SataEnable; + +/** Offset 0x00EA - SATA Mode + Select SATA controller working mode. + 0:AHCI, 1:RAID +**/ + UINT8 SataMode; + +/** Offset 0x00EB - SPIn Device Mode + Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available + modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden +**/ + UINT8 SerialIoSpiMode[7]; + +/** Offset 0x00F2 - SPI<N> Chip Select Polarity + Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow, + 1:SerialIoSpiCsActiveHigh +**/ + UINT8 SerialIoSpiCsPolarity[14]; + +/** Offset 0x0100 - SPI<N> Chip Select Enable + 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled +**/ + UINT8 SerialIoSpiCsEnable[14]; + +/** Offset 0x010E - SPIn Default Chip Select Output + Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available + options: 0:CS0, 1:CS1 +**/ + UINT8 SerialIoSpiDefaultCsOutput[7]; + +/** Offset 0x0115 - SPIn Default Chip Select Mode HW/SW + Sets Default CS Mode Hardware or Software. N represents controller index: SPI0, + SPI1, ... Available options: 0:HW, 1:SW +**/ + UINT8 SerialIoSpiCsMode[7]; + +/** Offset 0x011C - SPIn Default Chip Select State Low/High + Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ... + Available options: 0:Low, 1:High +**/ + UINT8 SerialIoSpiCsState[7]; + +/** Offset 0x0123 - Reserved +**/ + UINT8 Reserved5[141]; + +/** Offset 0x01B0 - UARTn Device Mode + Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available + modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartMode[7]; + +/** Offset 0x01B7 - Reserved +**/ + UINT8 Reserved6; + +/** Offset 0x01B8 - Default BaudRate for each Serial IO UART + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 SerialIoUartBaudRate[7]; + +/** Offset 0x01D4 - Default ParityType for each Serial IO UART + Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartParity[7]; + +/** Offset 0x01DB - Default DataBits for each Serial IO UART + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 SerialIoUartDataBits[7]; + +/** Offset 0x01E2 - Default StopBits for each Serial IO UART + Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: + TwoStopBits +**/ + UINT8 SerialIoUartStopBits[7]; + +/** Offset 0x01E9 - Power Gating mode for each Serial IO UART that works in COM mode + Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto +**/ + UINT8 SerialIoUartPowerGating[7]; + +/** Offset 0x01F0 - Enable Dma for each Serial IO UART that supports it + Set DMA/PIO mode. 0: Disabled, 1: Enabled +**/ + UINT8 SerialIoUartDmaEnable[7]; + +/** Offset 0x01F7 - Enables UART hardware flow control, CTS and RTS lines + Enables UART hardware flow control, CTS and RTS lines. +**/ + UINT8 SerialIoUartAutoFlow[7]; + +/** Offset 0x01FE - Reserved +**/ + UINT8 Reserved7[2]; + +/** Offset 0x0200 - SerialIoUartRtsPinMuxPolicy + Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartRtsPinMuxPolicy[7]; + +/** Offset 0x021C - SerialIoUartCtsPinMuxPolicy + Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 SerialIoUartCtsPinMuxPolicy[7]; + +/** Offset 0x0238 - SerialIoUartRxPinMuxPolicy + Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for + possible values. +**/ + UINT32 SerialIoUartRxPinMuxPolicy[7]; + +/** Offset 0x0254 - SerialIoUartTxPinMuxPolicy + Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for + possible values. +**/ + UINT32 SerialIoUartTxPinMuxPolicy[7]; + +/** Offset 0x0270 - Serial IO UART DBG2 table + Enable or disable Serial Io UART DBG2 table, default is Disable; <b>0: Disable;</b> + 1: Enable. +**/ + UINT8 SerialIoUartDbg2[7]; + +/** Offset 0x0277 - I2Cn Device Mode + Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available + modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden +**/ + UINT8 SerialIoI2cMode[8]; + +/** Offset 0x027F - Reserved +**/ + UINT8 Reserved8; + +/** Offset 0x0280 - Serial IO I2C SDA Pin Muxing + Select SerialIo I2c Sda pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SDA* for + possible values. +**/ + UINT32 PchSerialIoI2cSdaPinMux[8]; + +/** Offset 0x02A0 - Serial IO I2C SCL Pin Muxing + Select SerialIo I2c Scl pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SCL* for + possible values. +**/ + UINT32 PchSerialIoI2cSclPinMux[8]; + +/** Offset 0x02C0 - PCH SerialIo I2C Pads Termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination + respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on. +**/ + UINT8 PchSerialIoI2cPadsTermination[8]; + +/** Offset 0x02C8 - I3C Device Mode + Selects I3c operation mode. Available modes: 0:SerialIoI3cDisabled, 1:SerialIoI3cPci, + 2:SerialIoI3cPhantom (only applicable to I3C1, controlls GPIO enabling) +**/ + UINT8 SerialIoI3cMode[2]; + +/** Offset 0x02CA - Reserved +**/ + UINT8 Reserved9[38]; + +/** Offset 0x02F0 - ISH GP GPIO Pin Muxing + Determines ISH GP GPIO Pin muxing. See GPIO_*_MUXING_ISH_GP_x_GPIO_*. 'x' are GP_NUMBER +**/ + UINT32 IshGpGpioPinMuxing[12]; + +/** Offset 0x0320 - ISH UART Rx Pin Muxing + Determines ISH UART Rx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_TXD_* +**/ + UINT32 IshUartRxPinMuxing[3]; + +/** Offset 0x032C - ISH UART Tx Pin Muxing + Determines ISH UART Tx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_RXD_* +**/ + UINT32 IshUartTxPinMuxing[3]; + +/** Offset 0x0338 - ISH UART Rts Pin Muxing + Select ISH UART Rts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_RTS_* for possible values. +**/ + UINT32 IshUartRtsPinMuxing[3]; + +/** Offset 0x0344 - ISH UART Rts Pin Muxing + Select ISH UART Cts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_CTS_* for possible values. +**/ + UINT32 IshUartCtsPinMuxing[3]; + +/** Offset 0x0350 - ISH I2C SDA Pin Muxing + Select ISH I2C SDA Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SDA_* for possible values. +**/ + UINT32 IshI2cSdaPinMuxing[3]; + +/** Offset 0x035C - ISH I2C SCL Pin Muxing + Select ISH I2C SCL Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SCL_* for possible values. +**/ + UINT32 IshI2cSclPinMuxing[3]; + +/** Offset 0x0368 - Reserved +**/ + UINT8 Reserved10[8]; + +/** Offset 0x0370 - ISH SPI MOSI Pin Muxing + Select ISH SPI MOSI Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MOSI_* for possible values. +**/ + UINT32 IshSpiMosiPinMuxing[2]; + +/** Offset 0x0378 - ISH SPI MISO Pin Muxing + Select ISH SPI MISO Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MISO_* for possible values. +**/ + UINT32 IshSpiMisoPinMuxing[2]; + +/** Offset 0x0380 - ISH SPI CLK Pin Muxing + Select ISH SPI CLK Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CLK_* for possible values. +**/ + UINT32 IshSpiClkPinMuxing[2]; + +/** Offset 0x0388 - ISH SPI CS#N Pin Muxing + Select ISH SPI CS#N Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CS<N>_* for possible + values. N-SPI number, 0-1. +**/ + UINT32 IshSpiCsPinMuxing[4]; + +/** Offset 0x0398 - ISH GP GPIO Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo GP#N GPIO pads termination + respectively. #N are GP_NUMBER, not strictly relate to indexes of this table. Index + 0-23 -> ISH_GP_0-23, Index 24-25 -> ISH_GP_30-31 +**/ + UINT8 IshGpGpioPadTermination[12]; + +/** Offset 0x03A4 - ISH UART Rx Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rx pads termination + respectively. #N-byte for each controller, byte0 for UART0 Rx, byte1 for UART1 + Rx, and so on. +**/ + UINT8 IshUartRxPadTermination[3]; + +/** Offset 0x03A7 - ISH UART Tx Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Tx pads termination + respectively. #N-byte for each controller, byte0 for UART0 Tx, byte1 for UART1 + Tx, and so on. +**/ + UINT8 IshUartTxPadTermination[3]; + +/** Offset 0x03AA - ISH UART Rts Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rts pads termination + respectively. #N-byte for each controller, byte0 for UART0 Rts, byte1 for UART1 + Rts, and so on. +**/ + UINT8 IshUartRtsPadTermination[3]; + +/** Offset 0x03AD - ISH UART Rts Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Cts pads termination + respectively. #N-byte for each controller, byte0 for UART0 Cts, byte1 for UART1 + Cts, and so on. +**/ + UINT8 IshUartCtsPadTermination[3]; + +/** Offset 0x03B0 - ISH I2C SDA Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Sda pads termination + respectively. #N-byte for each controller, byte0 for I2C0 Sda, byte1 for I2C1 Sda, + and so on. +**/ + UINT8 IshI2cSdaPadTermination[3]; + +/** Offset 0x03B3 - Reserved +**/ + UINT8 Reserved11; + +/** Offset 0x03B4 - ISH I2C SCL Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Scl pads termination + respectively. #N-byte for each controller, byte0 for I2C0 Scl, byte1 for I2C1 Scl, + and so on. +**/ + UINT8 IshI2cSclPadTermination[3]; + +/** Offset 0x03B7 - Reserved +**/ + UINT8 Reserved12; + +/** Offset 0x03B8 - ISH SPI MOSI Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Mosi pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Mosi, byte1 for SPI1 + Mosi, and so on. +**/ + UINT8 IshSpiMosiPadTermination[2]; + +/** Offset 0x03BA - ISH SPI MISO Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Miso pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Miso, byte1 for SPI1 + Miso, and so on. +**/ + UINT8 IshSpiMisoPadTermination[2]; + +/** Offset 0x03BC - ISH SPI CLK Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Clk pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Clk, byte1 for SPI1 Clk, + and so on. +**/ + UINT8 IshSpiClkPadTermination[2]; + +/** Offset 0x03BE - ISH SPI CS#N Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Cs#M pads termination + respectively. N*M-byte for each controller, byte0 for SPI0 Cs0, byte1 for SPI1 + Cs1, SPI1 Cs0, byte2, SPI1 Cs1, byte3 +**/ + UINT8 IshSpiCsPadTermination[4]; + +/** Offset 0x03C2 - Enable PCH ISH SPI Cs#N pins assigned + Set if ISH SPI Cs#N pins are to be enabled by BIOS. 0: Disable; 1: Enable. N-Cs + number: 0-1 +**/ + UINT8 PchIshSpiCsEnable[4]; + +/** Offset 0x03C6 - USB Per Port HS Preemphasis Bias + USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. +**/ + UINT8 Usb2PhyPetxiset[16]; + +/** Offset 0x03D6 - USB Per Port HS Transmitter Bias + USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. +**/ + UINT8 Usb2PhyTxiset[16]; + +/** Offset 0x03E6 - USB Per Port HS Transmitter Emphasis + USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, + 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. +**/ + UINT8 Usb2PhyPredeemp[16]; + +/** Offset 0x03F6 - USB Per Port Half Bit Pre-emphasis + USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. + One byte for each port. +**/ + UINT8 Usb2PhyPehalfbit[16]; + +/** Offset 0x0406 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment + Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmphEnable[10]; + +/** Offset 0x0410 - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting + USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], + <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmph[10]; + +/** Offset 0x041A - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment + Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmpEnable[10]; + +/** Offset 0x0424 - USB 3.0 TX Output Downscale Amplitude Adjustment + USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default + = 00h</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmp[10]; + +/** Offset 0x042E +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10]; + +/** Offset 0x0438 +**/ + UINT8 PchUsb3HsioFilterSelNEnable[10]; + +/** Offset 0x0442 +**/ + UINT8 PchUsb3HsioFilterSelPEnable[10]; + +/** Offset 0x044C +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10]; + +/** Offset 0x0456 +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10]; + +/** Offset 0x0460 +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10]; + +/** Offset 0x046A +**/ + UINT8 PchUsb3HsioFilterSelN[10]; + +/** Offset 0x0474 +**/ + UINT8 PchUsb3HsioFilterSelP[10]; + +/** Offset 0x047E - Enable LAN + Enable/disable LAN controller. + $EN_DIS +**/ + UINT8 PchLanEnable; + +/** Offset 0x047F - Enable PCH TSN + Enable/disable TSN on the PCH. + $EN_DIS +**/ + UINT8 PchTsnEnable; + +/** Offset 0x0480 - TSN Link Speed + Set TSN Link Speed. + 0: 24Mhz 2.5Gbps, 1: 24Mhz 1Gbps, 2: 38.4Mhz 2.5Gbps, 3: 38.4Mhz 1Gbps +**/ + UINT8 PchTsnLinkSpeed; + +/** Offset 0x0481 - Reserved +**/ + UINT8 Reserved13[19]; + +/** Offset 0x0494 - PCIe PTM enable/disable + Enable/disable Precision Time Measurement for PCIE Root Ports. +**/ + UINT8 PciePtm[29]; + +/** Offset 0x04B1 - Reserved +**/ + UINT8 Reserved14[29]; + +/** Offset 0x04CE - USB PDO Programming + Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming + during later phase. 1: enable, 0: disable + $EN_DIS +**/ + UINT8 UsbPdoProgramming; + +/** Offset 0x04CF - Reserved +**/ + UINT8 Reserved15[5]; + +/** Offset 0x04D4 - Power button debounce configuration + Debounce time for PWRBTN in microseconds. For values not supported by HW, they will + be rounded down to closest supported on. 0: disable, 250-1024000us: supported range +**/ + UINT32 PmcPowerButtonDebounce; + +/** Offset 0x04D8 - Reserved +**/ + UINT8 Reserved16; + +/** Offset 0x04D9 - PCH eSPI Link Configuration Lock (SBLCL) + Enable/Disable lock of communication through SET_CONFIG/GET_CONFIG to eSPI target + addresseses from range 0x0 - 0x7FF + $EN_DIS +**/ + UINT8 PchEspiLockLinkConfiguration; + +/** Offset 0x04DA - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states + Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtV1p05RailEnabledStates; + +/** Offset 0x04DB - Mask to enable the platform configuration of external V1p05 VR rail + External V1P05 Rail Supported Configuration +**/ + UINT8 PchFivrExtV1p05RailSupportedVoltageStates; + +/** Offset 0x04DC - External V1P05 Voltage Value that will be used in S0i2/S0i3 states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtV1p05RailVoltage; + +/** Offset 0x04DE - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtV1p05RailIccMax; + +/** Offset 0x04DF - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states + Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailEnabledStates; + +/** Offset 0x04E0 - Mask to enable the platform configuration of external Vnn VR rail + External Vnn Rail Supported Configuration +**/ + UINT8 PchFivrExtVnnRailSupportedVoltageStates; + +/** Offset 0x04E1 - Reserved +**/ + UINT8 Reserved17; + +/** Offset 0x04E2 - External Vnn Voltage Value that will be used in S0ix/Sx states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...), Default is set to 420 +**/ + UINT16 PchFivrExtVnnRailVoltage; + +/** Offset 0x04E4 - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailIccMax; + +/** Offset 0x04E5 - Mask to enable the usage of external Vnn VR rail in Sx states + Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in + Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailSxEnabledStates; + +/** Offset 0x04E6 - External Vnn Voltage Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments + (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtVnnRailSxVoltage; + +/** Offset 0x04E8 - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailSxIccMax; + +/** Offset 0x04E9 - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to low current mode voltage. +**/ + UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime; + +/** Offset 0x04EA - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime; + +/** Offset 0x04EB - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime; + +/** Offset 0x04EC - Transition time in microseconds from Off (0V) to High Current Mode Voltage + This field has 1us resolution. When value is 0 Transition to 0V is disabled. +**/ + UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime; + +/** Offset 0x04EE - PMC Debug Message Enable + When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW + will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix + $EN_DIS +**/ + UINT8 PmcDbgMsgEn; + +/** Offset 0x04EF - Reserved +**/ + UINT8 Reserved18; + +/** Offset 0x04F0 - Pointer to ChipsetInit Binary + ChipsetInit Binary Pointer. +**/ + UINT32 ChipsetInitBinPtr; + +/** Offset 0x04F4 - Length of ChipsetInit Binary + ChipsetInit Binary Length. +**/ + UINT32 ChipsetInitBinLen; + +/** Offset 0x04F8 - Reserved +**/ + UINT8 Reserved19[16]; + +/** Offset 0x0508 - FIVR Dynamic Power Management + Enable/Disable FIVR Dynamic Power Management. + $EN_DIS +**/ + UINT8 PchFivrDynPm; + +/** Offset 0x0509 - Reserved +**/ + UINT8 Reserved20; + +/** Offset 0x050A - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtV1p05RailIccMaximum; + +/** Offset 0x050C - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtVnnRailIccMaximum; + +/** Offset 0x050E - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtVnnRailSxIccMaximum; + +/** Offset 0x0510 - Reserved +**/ + UINT8 Reserved21[14]; + +/** Offset 0x051E - CNVi Configuration + This option allows for automatic detection of Connectivity Solution. [Auto Detection] + assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. + 0:Disable, 1:Auto +**/ + UINT8 CnviMode; + +/** Offset 0x051F - CNVi Wi-Fi Core + Enable/Disable CNVi Wi-Fi Core, Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviWifiCore; + +/** Offset 0x0520 - CNVi BT Core + Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtCore; + +/** Offset 0x0521 - CNVi BT Audio Offload + Enable/Disable BT Audio Offload, Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtAudioOffload; + +/** Offset 0x0522 - Reserved +**/ + UINT8 Reserved22[2]; + +/** Offset 0x0524 - CNVi RF_RESET pin muxing + Select CNVi RF_RESET# pin depending on board routing. LP/P/M: GPP_A8 = 0x2942E408(default) + or GPP_F4 = 0x194CE404. H/S: 0. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h. +**/ + UINT32 CnviRfResetPinMux; + +/** Offset 0x0528 - CNVi CLKREQ pin muxing + Select CNVi CLKREQ pin depending on board routing. LP/P/M: GPP_A9 = 0x3942E609(default) + or GPP_F5 = 0x394CE605. H/S: 0. Refer to GPIO_*_MUXING_CNVI_CRF_XTAL_CLKREQ_* in + GpioPins*.h. +**/ + UINT32 CnviClkreqPinMux; + +/** Offset 0x052C - Enable Host C10 reporting through eSPI + Enable/disable Host C10 reporting to Device via eSPI Virtual Wire. + $EN_DIS +**/ + UINT8 PchEspiHostC10ReportEnable; + +/** Offset 0x052D - PCH USB2 PHY Power Gating enable + 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY + Sus Well PG + $EN_DIS +**/ + UINT8 PmcUsb2PhySusPgEnable; + +/** Offset 0x052E - PCH USB OverCurrent mapping enable + 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin + mapping allow for NOA usage of OC pins + $EN_DIS +**/ + UINT8 PchUsbOverCurrentEnable; + +/** Offset 0x052F - Espi Lgmr Memory Range decode + This option enables or disables espi lgmr + $EN_DIS +**/ + UINT8 PchEspiLgmrEnable; + +/** Offset 0x0530 - External V1P05 Control Ramp Timer value + Hold off time to be used when changing the v1p05_ctrl for external bypass value in us +**/ + UINT8 PchFivrExtV1p05RailCtrlRampTmr; + +/** Offset 0x0531 - External VNN Control Ramp Timer value + Hold off time to be used when changing the vnn_ctrl for external bypass value in us +**/ + UINT8 PchFivrExtVnnRailCtrlRampTmr; + +/** Offset 0x0532 - Set SATA DEVSLP GPIO Reset Config + Set SATA DEVSLP GPIO Reset Config per port. 0x00 - GpioResetDefault, 0x01 - GpioResumeReset, + 0x03 - GpioHostDeepReset, 0x05 - GpioPlatformReset, 0x07 - GpioDswReset. One byte + for each port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlpResetConfig[8]; + +/** Offset 0x053A - PCHHOT# pin + Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchHotEnable; + +/** Offset 0x053B - SATA LED + SATA LED indicating SATA controller activity. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 SataLedEnable; + +/** Offset 0x053C - VRAlert# Pin + When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling + to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmVrAlert; + +/** Offset 0x053D - AMT Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. + $EN_DIS +**/ + UINT8 AmtEnabled; + +/** Offset 0x053E - WatchDog Timer Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 WatchDogEnabled; + +/** Offset 0x053F - PET Progress + Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive + PET Events. Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 FwProgress; + +/** Offset 0x0540 - SOL Switch + Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx. + Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtSolEnabled; + +/** Offset 0x0541 - Reserved +**/ + UINT8 Reserved23; + +/** Offset 0x0542 - OS Timer + 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerOs; + +/** Offset 0x0544 - BIOS Timer + 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerBios; + +/** Offset 0x0546 - PCH PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 PcieRpSlotImplemented[29]; + +/** Offset 0x0563 - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 PcieRpAcsEnabled[29]; + +/** Offset 0x0580 - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 PcieRpEnableCpm[29]; + +/** Offset 0x059D - Reserved +**/ + UINT8 Reserved24[3]; + +/** Offset 0x05A0 - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 PcieRpDetectTimeoutMs[29]; + +/** Offset 0x05DA - ModPHY SUS Power Domain Dynamic Gating + Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on + PCH-H. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcModPhySusPgEnable; + +/** Offset 0x05DB - V1p05-PHY supply external FET control + Enable/Disable control using EXT_PWR_GATE# pin of external FET to power gate v1p05-PHY + supply. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcV1p05PhyExtFetControlEn; + +/** Offset 0x05DC - V1p05-IS supply external FET control + Enable/Disable control using EXT_PWR_GATE2# pin of external FET to power gate v1p05-IS + supply. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcV1p05IsExtFetControlEn; + +/** Offset 0x05DD - Enable/Disable PavpEnable + Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable + $EN_DIS +**/ + UINT8 PavpEnable; + +/** Offset 0x05DE - Enable/Disable PeiGraphicsPeimInit + <b>Enable(Default):</b> FSP will initialize the framebuffer and provide it via EFI_PEI_GRAPHICS_INFO_HOB. + Disable: FSP will NOT initialize the framebuffer. + $EN_DIS +**/ + UINT8 PeiGraphicsPeimInit; + +/** Offset 0x05DF - Enable D3 Hot in TCSS + This policy will enable/disable D3 hot support in IOM + $EN_DIS +**/ + UINT8 D3HotEnable; + +/** Offset 0x05E0 - Enable or disable GNA device + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 GnaEnable; + +/** Offset 0x05E1 - Reserved +**/ + UINT8 Reserved25[3]; + +/** Offset 0x05E4 - TypeC port GPIO setting + GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined + in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Mtl + = MeteorLake) +**/ + UINT32 IomTypeCPortPadCfg[12]; + +/** Offset 0x0614 - CPU USB3 Port Over Current Pin + Describe the specific over current pin number of USBC Port N. +**/ + UINT8 CpuUsb3OverCurrentPin[8]; + +/** Offset 0x061C - Enable D3 Cold in TCSS + This policy will enable/disable D3 cold support in IOM + $EN_DIS +**/ + UINT8 D3ColdEnable; + +/** Offset 0x061D - Enable/Disable PCIe tunneling for USB4 + Enable/Disable PCIe tunneling for USB4, default is enable + $EN_DIS +**/ + UINT8 ITbtPcieTunnelingForUsb4; + +/** Offset 0x061E - Enable/Disable SkipFspGop + Enable: Skip FSP provided GOP driver, Disable(Default): Use FSP provided GOP driver + $EN_DIS +**/ + UINT8 SkipFspGop; + +/** Offset 0x061F - Enable/Disable VPU Device + Enable(Default): Enable VPU Device, Disable: Disable VPU Device + $EN_DIS +**/ + UINT8 VpuEnable; + +/** Offset 0x0620 - TC State in TCSS + This TC C-State Limit in IOM +**/ + UINT8 TcCstateLimit; + +/** Offset 0x0621 - Reserved +**/ + UINT8 Reserved26[3]; + +/** Offset 0x0624 - Intel Graphics VBT (Video BIOS Table) Size + Size of Internal Graphics VBT Image +**/ + UINT32 VbtSize; + +/** Offset 0x0628 - Platform LID Status for LFP Displays. + LFP Display Lid Status (LID_STATUS enum): 0 (Default): LidClosed, 1: LidOpen. + 0: LidClosed, 1: LidOpen +**/ + UINT8 LidStatus; + +/** Offset 0x0629 - Reserved +**/ + UINT8 Reserved27[8]; + +/** Offset 0x0631 - Enable VMD controller + Enable/disable to VMD controller.0: Disable; 1: Enable(Default) + $EN_DIS +**/ + UINT8 VmdEnable; + +/** Offset 0x0632 - Enable VMD Global Mapping + Enable/disable to VMD controller.0: Disable(Default); 1: Enable + $EN_DIS +**/ + UINT8 VmdGlobalMapping; + +/** Offset 0x0633 - Map port under VMD + Map/UnMap port under VMD + $EN_DIS +**/ + UINT8 VmdPort[31]; + +/** Offset 0x0652 - Reserved +**/ + UINT8 Reserved28[31]; + +/** Offset 0x0671 - VMD Port Device + VMD Root port device number. +**/ + UINT8 VmdPortDev[31]; + +/** Offset 0x0690 - VMD Port Func + VMD Root port function number. +**/ + UINT8 VmdPortFunc[31]; + +/** Offset 0x06AF - Reserved +**/ + UINT8 Reserved29; + +/** Offset 0x06B0 - VMD Variable + VMD Variable Pointer. +**/ + UINT64 VmdVariablePtr; + +/** Offset 0x06B8 - Temporary CfgBar address for VMD + VMD Variable Pointer. +**/ + UINT32 VmdCfgBarBase; + +/** Offset 0x06BC - Temporary MemBar1 address for VMD + VMD Variable Pointer. +**/ + UINT32 VmdMemBar1Base; + +/** Offset 0x06C0 - Temporary MemBar2 address for VMD + VMD Variable Pointer. +**/ + UINT32 VmdMemBar2Base; + +/** Offset 0x06C4 - Reserved +**/ + UINT8 Reserved30; + +/** Offset 0x06C5 - Enable/Disable PMC-PD Solution + This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution + $EN_DIS +**/ + UINT8 PmcPdEnable; + +/** Offset 0x06C6 - TCSS Aux Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssAuxOri; + +/** Offset 0x06C8 - TCSS HSL Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssHslOri; + +/** Offset 0x06CA - USB override in IOM + This policy will enable/disable USB Connect override in IOM + $EN_DIS +**/ + UINT8 UsbOverride; + +/** Offset 0x06CB - ITBT Root Port Enable + ITBT Root Port Enable, 0:Disable, 1:Enable + 0:Disable, 1:Enable +**/ + UINT8 ITbtPcieRootPortEn[4]; + +/** Offset 0x06CF - TCSS USB Port Enable + Bits 0, 1, ... max Type C port control enables +**/ + UINT8 UsbTcPortEn; + +/** Offset 0x06D0 - ITBTForcePowerOn Timeout value + ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000. + 100 = 100 ms. +**/ + UINT16 ITbtForcePowerOnTimeoutInMs; + +/** Offset 0x06D2 - ITbtConnectTopology Timeout value + ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range + is 0-10000. 100 = 100 ms. +**/ + UINT16 ITbtConnectTopologyTimeoutInMs; + +/** Offset 0x06D4 - VCCST request for IOM + This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5 + $EN_DIS +**/ + UINT8 VccSt; + +/** Offset 0x06D5 - Reserved +**/ + UINT8 Reserved31; + +/** Offset 0x06D6 - ITBT DMA LTR + TCSS DMA1, DMA2 LTR value +**/ + UINT16 ITbtDmaLtr[2]; + +/** Offset 0x06DA - Reserved +**/ + UINT8 Reserved32; + +/** Offset 0x06DB - Enable/Disable PTM + This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports + $EN_DIS +**/ + UINT8 PtmEnabled[4]; + +/** Offset 0x06DF - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 SaPcieItbtRpLtrEnable[4]; + +/** Offset 0x06E3 - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4]; + +/** Offset 0x06E7 - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x06EB - Reserved +**/ + UINT8 Reserved33; + +/** Offset 0x06EC - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4]; + +/** Offset 0x06F4 - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4]; + +/** Offset 0x06F8 - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x06FC - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4]; + +/** Offset 0x0704 - Force LTR Override + Force LTR Override. +**/ + UINT8 SaPcieItbtRpForceLtrOverride[4]; + +/** Offset 0x0708 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 SaPcieItbtRpLtrConfigLock[4]; + +/** Offset 0x070C - Enable or Disable TXT + Enables utilization of additional hardware capabilities provided by Intel (R) Trusted + Execution Technology. Changes require a full power cycle to take effect. <b>0: + Disable</b>, 1: Enable. + $EN_DIS +**/ + UINT8 TxtEnable; + +/** Offset 0x070D - Reserved +**/ + UINT8 Reserved34[3]; + +/** Offset 0x0710 - CpuBistData + Pointer CPU BIST Data +**/ + UINT64 CpuBistData; + +/** Offset 0x0718 - CpuMpPpi + <b>Optional</b> pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI. + If not NULL, FSP will use the boot loader's implementation of multiprocessing. + See section 5.1.4 of the FSP Integration Guide for more details. +**/ + UINT64 CpuMpPpi; + +/** Offset 0x0720 - Reserved +**/ + UINT8 Reserved35[4]; + +/** Offset 0x0724 - PpinSupport to view Protected Processor Inventory Number + PPIN Feature Support to view Protected Processor Inventory Number. Disable to turn + off this feature. When 'PPIN Enable Mode' is selected, this shows second option + where feature can be enabled based on EOM (End of Manufacturing) flag or it is + always enabled + 0: Disable, 1: Enable, 2: Auto +**/ + UINT8 PpinSupport; + +/** Offset 0x0725 - Reserved +**/ + UINT8 Reserved36; + +/** Offset 0x0726 - Smbios Type4 Max Speed Override + Provide the option for platform to override the MaxSpeed field of Smbios Type 4. + If this value is not zero, it dominates the field. +**/ + UINT16 SmbiosType4MaxSpeedOverride; + +/** Offset 0x0728 - Advanced Encryption Standard (AES) feature + Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable + $EN_DIS +**/ + UINT8 AesEnable; + +/** Offset 0x0729 - AvxDisable + Enable/Disable the AVX and AVX2 Instructions + 0: Enable, 1: Disable +**/ + UINT8 AvxDisable; + +/** Offset 0x072A - Reserved +**/ + UINT8 Reserved37[58]; + +/** Offset 0x0764 - Enable Power Optimizer + Enable DMI Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 PchPwrOptEnable; + +/** Offset 0x0765 - PCH Flash Protection Ranges Write Enble + Write or erase is blocked by hardware. +**/ + UINT8 PchWriteProtectionEnable[5]; + +/** Offset 0x076A - PCH Flash Protection Ranges Read Enble + Read is blocked by hardware. +**/ + UINT8 PchReadProtectionEnable[5]; + +/** Offset 0x076F - Reserved +**/ + UINT8 Reserved38; + +/** Offset 0x0770 - PCH Protect Range Limit + Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for + limit comparison. +**/ + UINT16 PchProtectedRangeLimit[5]; + +/** Offset 0x077A - PCH Protect Range Base + Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. +**/ + UINT16 PchProtectedRangeBase[5]; + +/** Offset 0x0784 - Enable Pme + Enable Azalia wake-on-ring. + $EN_DIS +**/ + UINT8 PchHdaPme; + +/** Offset 0x0785 - HD Audio Link Frequency + HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. + 0: 6MHz, 1: 12MHz, 2: 24MHz +**/ + UINT8 PchHdaLinkFrequency; + +/** Offset 0x0786 - Enable PCH ISH SPI Cs0 pins assigned + Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshSpiCs0Enable[1]; + +/** Offset 0x0787 - Enable PCH Io Apic Entry 24-119 + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIoApicEntry24_119; + +/** Offset 0x0788 - PCH Io Apic ID + This member determines IOAPIC ID. Default is 0x02. +**/ + UINT8 PchIoApicId; + +/** Offset 0x0789 - Enable PCH ISH SPI pins assigned + Set if ISH SPI native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshSpiEnable[1]; + +/** Offset 0x078A - Enable PCH ISH UART pins assigned + Set if ISH UART native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshUartEnable[2]; + +/** Offset 0x078C - Enable PCH ISH I2C pins assigned + Set if ISH I2C native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshI2cEnable[3]; + +/** Offset 0x078F - Enable PCH ISH I3C pins assigned + Set if ISH I3C native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshI3cEnable; + +/** Offset 0x0790 - Enable PCH ISH GP pins assigned + Set if ISH GP native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshGpEnable[12]; + +/** Offset 0x079C - PCH ISH PDT Unlock Msg + 0: False; 1: True. + $EN_DIS +**/ + UINT8 PchIshPdtUnlock; + +/** Offset 0x079D - Reserved +**/ + UINT8 Reserved39; + +/** Offset 0x079E - Enable PCH Lan LTR capabilty of PCH internal LAN + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchLanLtrEnable; + +/** Offset 0x079F - Enable LOCKDOWN BIOS LOCK + Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region + protection. + $EN_DIS +**/ + UINT8 PchLockDownBiosLock; + +/** Offset 0x07A0 - PCH Compatibility Revision ID + This member describes whether or not the CRID feature of PCH should be enabled. + $EN_DIS +**/ + UINT8 PchCrid; + +/** Offset 0x07A1 - RTC BIOS Interface Lock + Enable RTC BIOS interface lock. When set, prevents RTC TS (BUC.TS) from being changed. + $EN_DIS +**/ + UINT8 RtcBiosInterfaceLock; + +/** Offset 0x07A2 - RTC Cmos Memory Lock + Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper + and and lower 128-byte bank of RTC RAM. + $EN_DIS +**/ + UINT8 RtcMemoryLock; + +/** Offset 0x07A3 - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 PcieRpHotPlug[29]; + +/** Offset 0x07C0 - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. + $EN_DIS +**/ + UINT8 PcieRpPmSci[29]; + +/** Offset 0x07DD - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 PcieRpTransmitterHalfSwing[29]; + +/** Offset 0x07FA - Enable PCIE RP Clk Req Detect + Probe CLKREQ# signal before enabling CLKREQ# based power management. +**/ + UINT8 PcieRpClkReqDetect[29]; + +/** Offset 0x0817 - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 PcieRpAdvancedErrorReporting[29]; + +/** Offset 0x0834 - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 PcieRpUnsupportedRequestReport[29]; + +/** Offset 0x0851 - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 PcieRpFatalErrorReport[29]; + +/** Offset 0x086E - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 PcieRpNoFatalErrorReport[29]; + +/** Offset 0x088B - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 PcieRpCorrectableErrorReport[29]; + +/** Offset 0x08A8 - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnFatalError[29]; + +/** Offset 0x08C5 - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnNonFatalError[29]; + +/** Offset 0x08E2 - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnCorrectableError[29]; + +/** Offset 0x08FF - PCIE RP Max Payload + Max Payload Size supported, Default 256B, see enum PCH_PCIE_MAX_PAYLOAD. +**/ + UINT8 PcieRpMaxPayload[29]; + +/** Offset 0x091C - Touch Host Controller Assignment + Assign THC 0x0:ThcAssignmentNone, 0x1:ThcAssignmentThc0, 0x2:ThcAssignmentThc1 +**/ + UINT8 ThcAssignment[2]; + +/** Offset 0x091E - Reserved +**/ + UINT8 Reserved40[122]; + +/** Offset 0x0998 - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: + PCIE_SPEED). +**/ + UINT8 PcieRpPcieSpeed[29]; + +/** Offset 0x09B5 - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 PcieRpPhysicalSlotNumber[29]; + +/** Offset 0x09D2 - PCIE RP Completion Timeout + The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default. +**/ + UINT8 PcieRpCompletionTimeout[29]; + +/** Offset 0x09EF - PCIE RP Aspm + The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is + PchPcieAspmAutoConfig. +**/ + UINT8 PcieRpAspm[29]; + +/** Offset 0x0A0C - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). + Default is PchPcieL1SubstatesL1_1_2. +**/ + UINT8 PcieRpL1Substates[29]; + +/** Offset 0x0A29 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 PcieRpLtrEnable[29]; + +/** Offset 0x0A46 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 PcieRpLtrConfigLock[29]; + +/** Offset 0x0A63 - PCIE RP override default settings for EQ + Choose PCIe EQ method + $EN_DIS +**/ + UINT8 PcieEqOverrideDefault[29]; + +/** Offset 0x0A80 - Reserved +**/ + UINT8 Reserved41[3767]; + +/** Offset 0x1937 - PCIE RP Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 PcieEnablePeerMemoryWrite[12]; + +/** Offset 0x1943 - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 PcieComplianceTestMode; + +/** Offset 0x1944 - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 PcieRpFunctionSwap; + +/** Offset 0x1945 - Reserved +**/ + UINT8 Reserved42; + +/** Offset 0x1946 - PCH Pm PME_B0_S5_DIS + When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. + $EN_DIS +**/ + UINT8 PchPmPmeB0S5Dis; + +/** Offset 0x1947 - PCIE IMR + Enables Isolated Memory Region for PCIe. + $EN_DIS +**/ + UINT8 PcieRpImrEnabled; + +/** Offset 0x1948 - PCIE IMR port number + Selects PCIE root port number for IMR feature. +**/ + UINT8 PcieRpImrSelection; + +/** Offset 0x1949 - PCH Pm Wol Enable Override + Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. + $EN_DIS +**/ + UINT8 PchPmWolEnableOverride; + +/** Offset 0x194A - PCH Pm WoW lan Enable + Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanEnable; + +/** Offset 0x194B - Reserved +**/ + UINT8 Reserved43[4]; + +/** Offset 0x194F - PCH Pm Slp S3 Min Assert + SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. +**/ + UINT8 PchPmSlpS3MinAssert; + +/** Offset 0x1950 - PCH Pm Slp S4 Min Assert + SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. +**/ + UINT8 PchPmSlpS4MinAssert; + +/** Offset 0x1951 - PCH Pm Slp Sus Min Assert + SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. +**/ + UINT8 PchPmSlpSusMinAssert; + +/** Offset 0x1952 - PCH Pm Slp A Min Assert + SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. +**/ + UINT8 PchPmSlpAMinAssert; + +/** Offset 0x1953 - USB Overcurrent Override for VISA + This option overrides USB Over Current enablement state that USB OC will be disabled + after enabling this option. Enable when VISA pin is muxed with USB OC + $EN_DIS +**/ + UINT8 PchEnableDbcObs; + +/** Offset 0x1954 - PCH Pm Slp Strch Sus Up + Enable SLP_X Stretching After SUS Well Power Up. + $EN_DIS +**/ + UINT8 PchPmSlpStrchSusUp; + +/** Offset 0x1955 - PCH Pm Slp Lan Low Dc + Enable/Disable SLP_LAN# Low on DC Power. + $EN_DIS +**/ + UINT8 PchPmSlpLanLowDc; + +/** Offset 0x1956 - PCH Pm Pwr Btn Override Period + PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. +**/ + UINT8 PchPmPwrBtnOverridePeriod; + +/** Offset 0x1957 - PCH Pm Disable Native Power Button + Power button native mode disable. + $EN_DIS +**/ + UINT8 PchPmDisableNativePowerButton; + +/** Offset 0x1958 - PCH Pm ME_WAKE_STS + Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmMeWakeSts; + +/** Offset 0x1959 - PCH Pm WOL_OVR_WK_STS + Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmWolOvrWkSts; + +/** Offset 0x195A - PCH Pm Reset Power Cycle Duration + Could be customized in the unit of second. Please refer to EDS for all support settings. + 0 is default, 1 is 1 second, 2 is 2 seconds, ... +**/ + UINT8 PchPmPwrCycDur; + +/** Offset 0x195B - PCH Pm Pcie Pll Ssc + Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No + BIOS override. +**/ + UINT8 PchPmPciePllSsc; + +/** Offset 0x195C - PCH Legacy IO Low Latency Enable + Set to enable low latency of legacy IO. <b>0: Disable</b>, 1: Enable + $EN_DIS +**/ + UINT8 PchLegacyIoLowLatency; + +/** Offset 0x195D - PCH Sata Pwr Opt Enable + SATA Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 SataPwrOptEnable; + +/** Offset 0x195E - PCH Sata eSATA Speed Limit + When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. + $EN_DIS +**/ + UINT8 EsataSpeedLimit; + +/** Offset 0x195F - PCH Sata Speed Limit + Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. +**/ + UINT8 SataSpeedLimit; + +/** Offset 0x1960 - Enable SATA Port HotPlug + Enable SATA Port HotPlug. +**/ + UINT8 SataPortsHotPlug[8]; + +/** Offset 0x1968 - Enable SATA Port Interlock Sw + Enable SATA Port Interlock Sw. +**/ + UINT8 SataPortsInterlockSw[8]; + +/** Offset 0x1970 - Enable SATA Port External + Enable SATA Port External. +**/ + UINT8 SataPortsExternal[8]; + +/** Offset 0x1978 - Enable SATA Port SpinUp + Enable the COMRESET initialization Sequence to the device. +**/ + UINT8 SataPortsSpinUp[8]; + +/** Offset 0x1980 - Enable SATA Port Solid State Drive + 0: HDD; 1: SSD. +**/ + UINT8 SataPortsSolidStateDrive[8]; + +/** Offset 0x1988 - Enable SATA Port Enable Dito Config + Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). +**/ + UINT8 SataPortsEnableDitoConfig[8]; + +/** Offset 0x1990 - Enable SATA Port DmVal + DITO multiplier. Default is 15. +**/ + UINT8 SataPortsDmVal[8]; + +/** Offset 0x1998 - Reserved +**/ + UINT8 Reserved44[2]; + +/** Offset 0x199A - Enable SATA Port DmVal + DEVSLP Idle Timeout (DITO), Default is 625. +**/ + UINT16 SataPortsDitoVal[8]; + +/** Offset 0x19AA - Enable SATA Port ZpOdd + Support zero power ODD. +**/ + UINT8 SataPortsZpOdd[8]; + +/** Offset 0x19B2 - PCH Sata Rst Raid Alternate Id + Enable RAID Alternate ID. + $EN_DIS +**/ + UINT8 SataRstRaidDeviceId; + +/** Offset 0x19B3 - PCH Sata Rst Pcie Storage Remap enable + Enable Intel RST for PCIe Storage remapping. +**/ + UINT8 SataRstPcieEnable[3]; + +/** Offset 0x19B6 - PCH Sata Rst Pcie Storage Port + Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). +**/ + UINT8 SataRstPcieStoragePort[3]; + +/** Offset 0x19B9 - PCH Sata Rst Pcie Device Reset Delay + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms +**/ + UINT8 SataRstPcieDeviceResetDelay[3]; + +/** Offset 0x19BC - UFS enable/disable + Enable/Disable UFS controller, One byte for each Controller - (1,0) to enable controller + 0 and (0,1) to enable controller 1 + $EN_DIS +**/ + UINT8 UfsEnable[2]; + +/** Offset 0x19BE - Reserved +**/ + UINT8 Reserved45[2]; + +/** Offset 0x19C0 - IEH Mode + Integrated Error Handler Mode, 0: Bypass, 1: Enable + 0: Bypass, 1:Enable +**/ + UINT8 IehMode; + +/** Offset 0x19C1 - Reserved +**/ + UINT8 Reserved46[11]; + +/** Offset 0x19CC - PCH Thermal Throttling Custimized T0Level Value + Custimized T0Level value. +**/ + UINT16 PchT0Level; + +/** Offset 0x19CE - PCH Thermal Throttling Custimized T1Level Value + Custimized T1Level value. +**/ + UINT16 PchT1Level; + +/** Offset 0x19D0 - PCH Thermal Throttling Custimized T2Level Value + Custimized T2Level value. +**/ + UINT16 PchT2Level; + +/** Offset 0x19D2 - Enable PCH Thermal Throttle + Enable thermal throttle function. + $EN_DIS +**/ + UINT8 PchTTEnable; + +/** Offset 0x19D3 - PCH PMSync State 13 + When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force + at least T2 state. + $EN_DIS +**/ + UINT8 PchTTState13Enable; + +/** Offset 0x19D4 - PCH Thermal Throttle Lock + Thermal Throttle Lock. + $EN_DIS +**/ + UINT8 PchTTLock; + +/** Offset 0x19D5 - Reserved +**/ + UINT8 Reserved47[9]; + +/** Offset 0x19DE - DMI Thermal Sensor Autonomous Width Enable + DMI Thermal Sensor Autonomous Width Enable. + $EN_DIS +**/ + UINT8 PchDmiTsawEn; + +/** Offset 0x19DF - DMI Thermal Sensor Suggested Setting + DMT thermal sensor suggested representative values. + $EN_DIS +**/ + UINT8 DmiSuggestedSetting; + +/** Offset 0x19E0 - Thermal Sensor 0 Target Width + Thermal Sensor 0 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS0TW; + +/** Offset 0x19E1 - Thermal Sensor 1 Target Width + Thermal Sensor 1 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS1TW; + +/** Offset 0x19E2 - Thermal Sensor 2 Target Width + Thermal Sensor 2 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS2TW; + +/** Offset 0x19E3 - Thermal Sensor 3 Target Width + Thermal Sensor 3 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS3TW; + +/** Offset 0x19E4 - Port 0 T1 Multipler + Port 0 T1 Multipler. +**/ + UINT8 SataP0T1M; + +/** Offset 0x19E5 - Port 0 T2 Multipler + Port 0 T2 Multipler. +**/ + UINT8 SataP0T2M; + +/** Offset 0x19E6 - Port 0 T3 Multipler + Port 0 T3 Multipler. +**/ + UINT8 SataP0T3M; + +/** Offset 0x19E7 - Port 0 Tdispatch + Port 0 Tdispatch. +**/ + UINT8 SataP0TDisp; + +/** Offset 0x19E8 - Port 1 T1 Multipler + Port 1 T1 Multipler. +**/ + UINT8 SataP1T1M; + +/** Offset 0x19E9 - Port 1 T2 Multipler + Port 1 T2 Multipler. +**/ + UINT8 SataP1T2M; + +/** Offset 0x19EA - Port 1 T3 Multipler + Port 1 T3 Multipler. +**/ + UINT8 SataP1T3M; + +/** Offset 0x19EB - Port 1 Tdispatch + Port 1 Tdispatch. +**/ + UINT8 SataP1TDisp; + +/** Offset 0x19EC - Port 0 Tinactive + Port 0 Tinactive. +**/ + UINT8 SataP0Tinact; + +/** Offset 0x19ED - Port 0 Alternate Fast Init Tdispatch + Port 0 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP0TDispFinit; + +/** Offset 0x19EE - Port 1 Tinactive + Port 1 Tinactive. +**/ + UINT8 SataP1Tinact; + +/** Offset 0x19EF - Port 1 Alternate Fast Init Tdispatch + Port 1 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP1TDispFinit; + +/** Offset 0x19F0 - Sata Thermal Throttling Suggested Setting + Sata Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 SataThermalSuggestedSetting; + +/** Offset 0x19F1 - Reserved +**/ + UINT8 Reserved48; + +/** Offset 0x19F2 - Thermal Device Temperature + Decides the temperature. +**/ + UINT16 PchTemperatureHotLevel; + +/** Offset 0x19F4 - USB2 Port Over Current Pin + Describe the specific over current pin number of USB 2.0 Port N. +**/ + UINT8 Usb2OverCurrentPin[16]; + +/** Offset 0x1A04 - USB3 Port Over Current Pin + Describe the specific over current pin number of USB 3.0 Port N. +**/ + UINT8 Usb3OverCurrentPin[10]; + +/** Offset 0x1A0E - Enable xHCI LTR override + Enables override of recommended LTR values for xHCI + $EN_DIS +**/ + UINT8 PchUsbLtrOverrideEnable; + +/** Offset 0x1A0F - Reserved +**/ + UINT8 Reserved49; + +/** Offset 0x1A10 - xHCI High Idle Time LTR override + Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting +**/ + UINT32 PchUsbLtrHighIdleTimeOverride; + +/** Offset 0x1A14 - xHCI Medium Idle Time LTR override + Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting +**/ + UINT32 PchUsbLtrMediumIdleTimeOverride; + +/** Offset 0x1A18 - xHCI Low Idle Time LTR override + Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting +**/ + UINT32 PchUsbLtrLowIdleTimeOverride; + +/** Offset 0x1A1C - Enable 8254 Static Clock Gating + Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time + might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support + legacy OS using 8254 timer. Also enable this while S0ix is enabled. + $EN_DIS +**/ + UINT8 Enable8254ClockGating; + +/** Offset 0x1A1D - Enable 8254 Static Clock Gating On S3 + This is only applicable when Enable8254ClockGating is disabled. FSP will do the + 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This + avoids the SMI requirement for the programming. + $EN_DIS +**/ + UINT8 Enable8254ClockGatingOnS3; + +/** Offset 0x1A1E - Enable TCO timer. + When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have + huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer + emulation must be enabled, and WDAT table must not be exposed to the OS. + $EN_DIS +**/ + UINT8 EnableTcoTimer; + +/** Offset 0x1A1F - Reserved +**/ + UINT8 Reserved50[9]; + +/** Offset 0x1A28 - BgpdtHash[4] + BgpdtHash values +**/ + UINT64 BgpdtHash[4]; + +/** Offset 0x1A48 - BiosGuardAttr + BiosGuardAttr default values +**/ + UINT32 BiosGuardAttr; + +/** Offset 0x1A4C - Reserved +**/ + UINT8 Reserved51[4]; + +/** Offset 0x1A50 - BiosGuardModulePtr + BiosGuardModulePtr default values +**/ + UINT64 BiosGuardModulePtr; + +/** Offset 0x1A58 - SendEcCmd + SendEcCmd function pointer. \n + @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE + EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode +**/ + UINT64 SendEcCmd; + +/** Offset 0x1A60 - EcCmdProvisionEav + Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC +**/ + UINT8 EcCmdProvisionEav; + +/** Offset 0x1A61 - EcCmdLock + EcCmdLock default values. Locks Ephemeral Authorization Value sent previously +**/ + UINT8 EcCmdLock; + +/** Offset 0x1A62 - Reserved +**/ + UINT8 Reserved52[22]; + +/** Offset 0x1A78 - Skip Ssid Programming. + When set to TRUE, silicon code will not do any SSID programming and platform code + needs to handle that by itself properly. + $EN_DIS +**/ + UINT8 SiSkipSsidProgramming; + +/** Offset 0x1A79 - Reserved +**/ + UINT8 Reserved53; + +/** Offset 0x1A7A - Change Default SVID + Change the default SVID used in FSP to programming internal devices. This is only + valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiCustomizedSvid; + +/** Offset 0x1A7C - Change Default SSID + Change the default SSID used in FSP to programming internal devices. This is only + valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiCustomizedSsid; + +/** Offset 0x1A7E - Reserved +**/ + UINT8 Reserved54[2]; + +/** Offset 0x1A80 - SVID SDID table Poniter. + The address of the table of SVID SDID to customize each SVID SDID entry. This is + only valid when SkipSsidProgramming is FALSE. +**/ + UINT64 SiSsidTablePtr; + +/** Offset 0x1A88 - Number of ssid table. + SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr. + This is only valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiNumberOfSsidTableEntry; + +/** Offset 0x1A8A - USB2 Port Reset Message Enable + 0: Disable USB2 Port Reset Message; 1: Enable USB2 Port Reset Message; This must + be enable for USB2 Port those are paired with CPU XHCI Port +**/ + UINT8 PortResetMessageEnable[16]; + +/** Offset 0x1A9A - SATA RST Interrupt Mode + Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. + 0:Msix, 1:Msi, 2:Legacy +**/ + UINT8 SataRstInterrupt; + +/** Offset 0x1A9B - Enable PS_ON. + PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power + target that will be required by the California Energy Commission (CEC). When FALSE, + PS_ON is to be disabled. + $EN_DIS +**/ + UINT8 PsOnEnable; + +/** Offset 0x1A9C - Pmc Cpu C10 Gate Pin Enable + Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO + and VccSTG rails instead of SLP_S0# pin. + $EN_DIS +**/ + UINT8 PmcCpuC10GatePinEnable; + +/** Offset 0x1A9D - Pch Dmi Aspm Ctrl + ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b> + 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto +**/ + UINT8 PchDmiAspmCtrl; + +/** Offset 0x1A9E - PchDmiCwbEnable + Central Write Buffer feature configurable and enabled by default + $EN_DIS +**/ + UINT8 PchDmiCwbEnable; + +/** Offset 0x1A9F - OS IDLE Mode Enable + Enable/Disable OS Idle Mode + $EN_DIS +**/ + UINT8 PmcOsIdleEnable; + +/** Offset 0x1AA0 - S0ix Auto-Demotion + Enable/Disable the Low Power Mode Auto-Demotion Host Control feature. + $EN_DIS +**/ + UINT8 PchS0ixAutoDemotion; + +/** Offset 0x1AA1 - Latch Events C10 Exit + When this bit is set to 1, SLP_S0# entry events in SLP_S0_DEBUG_REGx registers are + captured on C10 exit (instead of C10 entry which is default) + $EN_DIS +**/ + UINT8 PchPmLatchEventsC10Exit; + +/** Offset 0x1AA2 - Reserved +**/ + UINT8 Reserved55[127]; + +/** Offset 0x1B21 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTranEnable[10]; + +/** Offset 0x1B2B - USB 3.0 TX Output Unique Transition Bit Scale for rate 3 + USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], <b>Default + = 4Ch</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTran[10]; + +/** Offset 0x1B35 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTranEnable[10]; + +/** Offset 0x1B3F - USB 3.0 TX Output Unique Transition Bit Scale for rate 2 + USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8], + <b>Default = 4Ch</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTran[10]; + +/** Offset 0x1B49 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTranEnable[10]; + +/** Offset 0x1B53 - USB 3.0 TX Output Unique Transition Bit Scale for rate 1 + USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16], + <b>Default = 4Ch</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTran[10]; + +/** Offset 0x1B5D - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTranEnable[10]; + +/** Offset 0x1B67 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0 + USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24], + <b>Default = 4Ch</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTran[10]; + +/** Offset 0x1B71 - Skip PAM regsiter lock + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + $EN_DIS +**/ + UINT8 SkipPamLock; + +/** Offset 0x1B72 - Enable/Disable IGFX RenderStandby + Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby + $EN_DIS +**/ + UINT8 RenderStandby; + +/** Offset 0x1B73 - Reserved +**/ + UINT8 Reserved56; + +/** Offset 0x1B74 - GT Frequency Limit + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz +**/ + UINT8 GtFreqMax; + +/** Offset 0x1B75 - Disable Turbo GT + 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency + $EN_DIS +**/ + UINT8 DisableTurboGt; + +/** Offset 0x1B76 - Reserved +**/ + UINT8 Reserved57[2]; + +/** Offset 0x1B78 - Enable TSN Multi-VC + Enable/disable Multi Virtual Channels(VC) in TSN. + $EN_DIS +**/ + UINT8 PchTsnMultiVcEnable; + +/** Offset 0x1B79 - Reserved +**/ + UINT8 Reserved58[11]; + +/** Offset 0x1B84 - LogoPixelHeight Address + Address of LogoPixelHeight +**/ + UINT32 LogoPixelHeight; + +/** Offset 0x1B88 - LogoPixelWidth Address + Address of LogoPixelWidth +**/ + UINT32 LogoPixelWidth; + +/** Offset 0x1B8C - Reserved +**/ + UINT8 Reserved59; + +/** Offset 0x1B8D - ITbt Usb4CmMode value + ITbt Usb4CmMode value. 0:Firmware CM, 1:Software CM +**/ + UINT8 Usb4CmMode; + +/** Offset 0x1B8E - Reserved +**/ + UINT8 Reserved60[75]; + +/** Offset 0x1BD9 - RSR feature + Enable or Disable RSR feature; 0: Disable; <b>1: Enable </b> + $EN_DIS +**/ + UINT8 EnableRsr; + +/** Offset 0x1BDA - Reserved +**/ + UINT8 Reserved61[4]; + +/** Offset 0x1BDE - Enable or Disable HWP + Enable/Disable Intel(R) Speed Shift Technology support. Enabling will expose the + CPPC v2 interface to allow for hardware controlled P-states. 0: Disable; <b>1: + Enable;</b> + $EN_DIS +**/ + UINT8 Hwp; + +/** Offset 0x1BDF - Package Long duration turbo mode time + Power Limit 1 Time Window value in seconds. The value may vary from 0 to 128. 0 + = default value (28 sec for Mobile and 8 sec for Desktop). Defines time window + which Processor Base Power (TDP) value should be maintained. Valid values(Unit + in seconds) 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , + 80 , 96 , 112 , 128 +**/ + UINT8 PowerLimit1Time; + +/** Offset 0x1BE0 - Short Duration Turbo Mode + Enable/Disable Power Limit 2 override. If this option is disabled, BIOS will program + the default values for Power Limit 2. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PowerLimit2; + +/** Offset 0x1BE1 - Turbo settings Lock + Enable/Disable locking of Package Power Limit settings. When enabled, PACKAGE_POWER_LIMIT + MSR will be locked and a reset will be required to unlock the register. <b>0: Disable; + </b> 1: Enable + $EN_DIS +**/ + UINT8 TurboPowerLimitLock; + +/** Offset 0x1BE2 - Package PL3 time window + Power Limit 3 Time Window value in Milli seconds. Indicates the time window over + which Power Limit 3 value should be maintained. If the value is 0, BIOS leaves + the hardware default value. Valid value: <b>0</b>, 3-8, 10, 12, 14, 16, 20, 24, + 28, 32, 40, 48, 56, 64. +**/ + UINT8 PowerLimit3Time; + +/** Offset 0x1BE3 - Package PL3 Duty Cycle + Specify the duty cycle in percentage that the CPU is required to maintain over the + configured time window. Range is 0-100. +**/ + UINT8 PowerLimit3DutyCycle; + +/** Offset 0x1BE4 - Package PL3 Lock + Power Limit 3 Lock. When enabled PL3 configurations are locked during OS. When disabled + PL3 configuration can be changed during OS. <b>0: Disable</b> ; 1:Enable + $EN_DIS +**/ + UINT8 PowerLimit3Lock; + +/** Offset 0x1BE5 - Package PL4 Lock + Power Limit 4 Lock. When enabled PL4 configurations are locked during OS. When disabled + PL4 configuration can be changed during OS. <b>0: Disable</b> ; 1:Enable + $EN_DIS +**/ + UINT8 PowerLimit4Lock; + +/** Offset 0x1BE6 - TCC Activation Offset + TCC Activation Offset. Offset from factory set TCC activation temperature at which + the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation + Temperature, in volts. <b>Default = 0h</b>. +**/ + UINT8 TccActivationOffset; + +/** Offset 0x1BE7 - Tcc Offset Clamp Enable/Disable + Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle + below P1. <b>0: Disabled</b>; 1: Enabled. + $EN_DIS +**/ + UINT8 TccOffsetClamp; + +/** Offset 0x1BE8 - Tcc Offset Lock + Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature + target; <b>0: Disabled</b>; 1: Enabled. + $EN_DIS +**/ + UINT8 TccOffsetLock; + +/** Offset 0x1BE9 - Custom Ratio State Entries + The number of custom ratio state entries, ranges from 0 to 40 for a valid custom + ratio table. Sets the number of custom P-states. At least 2 states must be present +**/ + UINT8 NumberOfEntries; + +/** Offset 0x1BEA - Custom Short term Power Limit time window + Power Limit 1 Time Window value in seconds. The value may vary from 0 to 128. 0 + = default value (28 sec for Mobile and 8 sec for Desktop). Defines time window + which Processor Base Power (TDP) value should be maintained. +**/ + UINT8 Custom1PowerLimit1Time; + +/** Offset 0x1BEB - Custom Turbo Activation Ratio + Custom value for Turbo Activation Ratio. Needs to be configured with valid values + from LFM to Max Turbo. 0 means don't use custom value. Valid Range 0 to 255 +**/ + UINT8 Custom1TurboActivationRatio; + +/** Offset 0x1BEC - Custom Config Tdp Control + Config Tdp(Base Power) Control (0/1/2) value for custom cTDP(Assured Power) level + 1. Valid Range is 0 to 2 +**/ + UINT8 Custom1ConfigTdpControl; + +/** Offset 0x1BED - Custom Short term Power Limit time window + Power Limit 1 Time Window value in seconds. The value may vary from 0 to 128. 0 + = default value (28 sec for Mobile and 8 sec for Desktop). Defines time window + which Processor Base Power (TDP) value should be maintained. +**/ + UINT8 Custom2PowerLimit1Time; + +/** Offset 0x1BEE - Custom Turbo Activation Ratio + Custom value for Turbo Activation Ratio. Needs to be configured with valid values + from LFM to Max Turbo. 0 means don't use custom value. Valid Range 0 to 255 +**/ + UINT8 Custom2TurboActivationRatio; + +/** Offset 0x1BEF - Custom Config Tdp Control + Config Tdp(Base Power) Control (0/1/2) value for custom cTDP(Assured Power) level + 1. Valid Range is 0 to 2 +**/ + UINT8 Custom2ConfigTdpControl; + +/** Offset 0x1BF0 - Custom Short term Power Limit time window + Power Limit 1 Time Window value in seconds. The value may vary from 0 to 128. 0 + = default value (28 sec for Mobile and 8 sec for Desktop). Defines time window + which Processor Base Power (TDP) value should be maintained. +**/ + UINT8 Custom3PowerLimit1Time; + +/** Offset 0x1BF1 - Custom Turbo Activation Ratio + Custom value for Turbo Activation Ratio. Needs to be configured with valid values + from LFM to Max Turbo. 0 means don't use custom value. Valid Range 0 to 255 +**/ + UINT8 Custom3TurboActivationRatio; + +/** Offset 0x1BF2 - Custom Config Tdp Control + Config Tdp(Base Power) Control (0/1/2) value for custom cTDP(Assured Power) level + 1. Valid Range is 0 to 2 +**/ + UINT8 Custom3ConfigTdpControl; + +/** Offset 0x1BF3 - ConfigTdp mode settings Lock + cTDP(Assured Power) Mode Lock sets the Lock bits on TURBO_ACTIVATION_RATIO and CONFIG_TDP_CONTROL. + Note: When CTDP(Assured Power) Lock is enabled Custom ConfigTDP Count will be forced + to 1 and Custom ConfigTDP Boot Index will be forced to 0. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 ConfigTdpLock; + +/** Offset 0x1BF4 - Load Configurable TDP SSDT + Enables cTDP(Assured Power) control via runtime ACPI BIOS methods. This 'BIOS only' + feature does not require EC or driver support. <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ConfigTdpBios; + +/** Offset 0x1BF5 - PL1 Enable value + Enable/Disable Platform Power Limit 1 programming. If this option is enabled, it + activates the PL1 value to be used by the processor to limit the average power + of given time window. <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit1; + +/** Offset 0x1BF6 - PL1 timewindow + Platform Power Limit 1 Time Window value in seconds. The value may vary from 0 to + 128. 0 = default values. Indicates the time window over which Platform Processor + Base Power (TDP) value should be maintained. Valid values(Unit in seconds) 0 to + 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PsysPowerLimit1Time; + +/** Offset 0x1BF7 - PL2 Enable Value + Enable/Disable Platform Power Limit 2 programming. If this option is disabled, BIOS + will program the default values for Platform Power Limit 2. <b>0: Disable</b>; + 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit2; + +/** Offset 0x1BF8 - Enable or Disable MLC Streamer Prefetcher + Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MlcStreamerPrefetcher; + +/** Offset 0x1BF9 - Enable or Disable MLC Spatial Prefetcher + Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 MlcSpatialPrefetcher; + +/** Offset 0x1BFA - Enable or Disable Monitor /MWAIT instructions + Enable/Disable MonitorMWait, if Disable MonitorMwait, the AP threads Idle Manner + should not set in MWAIT Loop. 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MonitorMwaitEnable; + +/** Offset 0x1BFB - Enable or Disable initialization of machine check registers + Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MachineCheckEnable; + +/** Offset 0x1BFC - AP Idle Manner of waiting for SIPI + AP threads Idle Manner for waiting signal to run. 1: HALT loop; <b>2: MWAIT loop</b>; + 3: RUN loop. + 1: HALT loop, 2: MWAIT loop, 3: RUN loop +**/ + UINT8 ApIdleManner; + +/** Offset 0x1BFD - Control on Processor Trace output scheme + Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output. + 0: Single Range Output, 1: ToPA Output +**/ + UINT8 ProcessorTraceOutputScheme; + +/** Offset 0x1BFE - Enable or Disable Processor Trace feature + Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ProcessorTraceEnable; + +/** Offset 0x1BFF - Enable or Disable Intel SpeedStep Technology + Allows more than two frequency ranges to be supported. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 Eist; + +/** Offset 0x1C00 - Enable or Disable Energy Efficient P-state + Enable/Disable Energy Efficient P-state feature. When set to 0, will disable access + to ENERGY_PERFORMANCE_BIAS MSR and CPUID Function will read 0 indicating no support + for Energy Efficient policy setting. When set to 1 will enable access to ENERGY_PERFORMANCE_BIAS + MSR and CPUID Function will read 1 indicating Energy Efficient policy setting is + supported. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnergyEfficientPState; + +/** Offset 0x1C01 - Enable or Disable Energy Efficient Turbo + Enable/Disable Energy Efficient Turbo Feature. This feature will opportunistically + lower the turbo frequency to increase efficiency. Recommended only to disable in + overclocking situations where turbo frequency must remain constant. Otherwise, + leave enabled. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 EnergyEfficientTurbo; + +/** Offset 0x1C02 - Enable or Disable T states + Enable or Disable T states; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 TStates; + +/** Offset 0x1C03 - Enable or Disable Bi-Directional PROCHOT# + Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 BiProcHot; + +/** Offset 0x1C04 - Enable or Disable PROCHOT# signal being driven externally + Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 DisableProcHotOut; + +/** Offset 0x1C05 - Enable or Disable PROCHOT# Response + Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ProcHotResponse; + +/** Offset 0x1C06 - Enable or Disable VR Thermal Alert + Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 DisableVrThermalAlert; + +/** Offset 0x1C07 - Enable or Disable Thermal Reporting + Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 EnableAllThermalFunctions; + +/** Offset 0x1C08 - Enable or Disable Thermal Monitor + Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 ThermalMonitor; + +/** Offset 0x1C09 - Enable or Disable CPU power states (C-states) + Enable/Disable CPU Power Management. Allows CPU to go to C states when it's not + 100% utilized. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 Cx; + +/** Offset 0x1C0A - Configure C-State Configuration Lock + Configure MSR to CFG Lock bit. 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 PmgCstCfgCtrlLock; + +/** Offset 0x1C0B - Enable or Disable Enhanced C-states + Enable/Disable C1E. When enabled, CPU will switch to minimum speed when all cores + enter C-State. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1e; + +/** Offset 0x1C0C - Enable or Disable Package Cstate Demotion + Enable or Disable Package C-State Demotion. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PkgCStateDemotion; + +/** Offset 0x1C0D - Enable or Disable Package Cstate UnDemotion + Enable or Disable Package C-State Un-Demotion. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PkgCStateUnDemotion; + +/** Offset 0x1C0E - Enable or Disable CState-Pre wake + Disable - to disable the Cstate Pre-Wake. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 CStatePreWake; + +/** Offset 0x1C0F - Enable or Disable TimedMwait Support. + Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 TimedMwait; + +/** Offset 0x1C10 - Enable or Disable IO to MWAIT redirection + When set, will map IO_read instructions sent to IO registers PMG_IO_BASE_ADDRBASE+offset + to MWAIT(offset). <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 CstCfgCtrIoMwaitRedirection; + +/** Offset 0x1C11 - Set the Max Pkg Cstate + Maximum Package C State Limit Setting. Cpu Default: Leaves to Factory default value. + Auto: Initializes to deepest available Package C State Limit. Valid values 0 - + C0/C1, 1 - C2, 2 - C3, 3 - C6, 4 - C7, 5 - C7S, 6 - C8, 7 - C9, 8 - C10, 254 - + CPU Default, <b>255 - Auto</b> +**/ + UINT8 PkgCStateLimit; + +/** Offset 0x1C12 - Interrupt Redirection Mode Select + Interrupt Redirection Mode Select for Logical Interrupts. 0: Fixed priority; 1: + Round robin; 2: Hash vector; 7: No change. +**/ + UINT8 PpmIrmSetting; + +/** Offset 0x1C13 - Lock prochot configuration + Lock prochot configuration Enable/Disable; 0: Disable;<b> 1: Enable</b> + $EN_DIS +**/ + UINT8 ProcHotLock; + +/** Offset 0x1C14 - Configuration for boot TDP selection + cTDP(Assured Power) Mode as Nominal/Level1/Level2/Deactivate TDP(Base Power) selection. + Deactivate option will set MSR to Nominal and MMIO to Zero. <b>0: TDP(Base Power) + Nominal</b>; 1: TDP(Base Power) Down; 2: TDP(Base Power) Up;0xFF : Deactivate +**/ + UINT8 ConfigTdpLevel; + +/** Offset 0x1C15 - Max P-State Ratio + Maximum P-state ratio to use in the custom P-state table. Valid Range 0 to 0x7F +**/ + UINT8 MaxRatio; + +/** Offset 0x1C16 - P-state ratios for custom P-state table + P-state ratios for custom P-state table. NumberOfEntries has valid range between + 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] + are configurable. Valid Range of each entry is 0 to 0x7F +**/ + UINT8 StateRatio[40]; + +/** Offset 0x1C3E - P-state ratios for max 16 version of custom P-state table + P-state ratios for max 16 version of custom P-state table. This table is used for + OS versions limited to a max of 16 P-States. If the first entry of this table is + 0, or if Number of Entries is 16 or less, then this table will be ignored, and + up to the top 16 values of the StateRatio table will be used instead. Valid Range + of each entry is 0 to 0x7F +**/ + UINT8 StateRatioMax16[16]; + +/** Offset 0x1C4E - Reserved +**/ + UINT8 Reserved62[2]; + +/** Offset 0x1C50 - Package Long duration turbo mode power limit + Power Limit 1 in Milli Watts. BIOS will round to the nearest 1/8W when programming. + Value set 120 = 15W. 0 = no custom override. Overclocking SKU: Value must be between + Max and Min Power Limits. Other SKUs: This value must be between Min Power Limit + and Processor Base Power (TDP) Limit. If value is 0, BIOS will program Processor + Base Power (TDP) value. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. Valid + Range 0 to 32767. +**/ + UINT32 PowerLimit1; + +/** Offset 0x1C54 - Package Short duration turbo mode power limit + Power Limit 2 in Milli Watts. BIOS will round to the nearest 1/8W when programming. + Value set 120 = 15W. If the value is 0, BIOS will program this value as 1.25*Processor + Base Power (TDP). Processor applies control policies such that the package power + does not exceed this limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 32767. +**/ + UINT32 PowerLimit2Power; + +/** Offset 0x1C58 - Package PL3 power limit + Power Limit 3 in Milli Watts. BIOS will round to the nearest 1/8W when programming. + Value set 120 = 15W. XE SKU: Any value can be programmed. Overclocking SKU: Value + must be between Max and Min Power Limits. Other SKUs: This value must be between + Min Power Limit and Processor Base Power (TDP) Limit. If the value is 0, BIOS leaves + the hardware default value. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 32767. +**/ + UINT32 PowerLimit3; + +/** Offset 0x1C5C - Package PL4 power limit + Power Limit 4 in Milli Watts. BIOS will round to the nearest 1/8W when programming. + Value set 120 = 15W. If the value is 0, BIOS leaves default value. Units are based + on POWER_MGMT_CONFIG.CustomPowerUnit. Valid Range 0 to 32767. +**/ + UINT32 PowerLimit4; + +/** Offset 0x1C60 - Reserved +**/ + UINT8 Reserved63[4]; + +/** Offset 0x1C64 - Tcc Offset Time Window for RATL +**/ + UINT32 TccOffsetTimeWindowForRatl; + +/** Offset 0x1C68 - Short term Power Limit value for custom cTDP level 1 + Power Limit 1 in Milli Watts. BIOS will round to the nearest 1/8W when programming. + Value set 120 = 15W. 0 = no custom override. Overclocking SKU: Value must be between + Max and Min Power Limits. Other SKUs: This value must be between Min Power Limit + and Processor Base Power (TDP) Limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 32767. +**/ + UINT32 Custom1PowerLimit1; + +/** Offset 0x1C6C - Long term Power Limit value for custom cTDP level 1 + Power Limit 2 value in Milli Watts. BIOS will round to the nearest 1/8W when programming. + Value set 120 = 15W. 0 = no custom override. Processor applies control policies + such that the package power does not exceed this limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 32767. +**/ + UINT32 Custom1PowerLimit2; + +/** Offset 0x1C70 - Short term Power Limit value for custom cTDP level 2 + Power Limit 1 in Milli Watts. BIOS will round to the nearest 1/8W when programming. + Value set 120 = 15W. 0 = no custom override. Overclocking SKU: Value must be between + Max and Min Power Limits. Other SKUs: This value must be between Min Power Limit + and Processor Base Power (TDP) Limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 32767. +**/ + UINT32 Custom2PowerLimit1; + +/** Offset 0x1C74 - Long term Power Limit value for custom cTDP level 2 + Power Limit 2 value in Milli Watts. BIOS will round to the nearest 1/8W when programming. + Value set 120 = 15W. 0 = no custom override. Processor applies control policies + such that the package power does not exceed this limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 32767. +**/ + UINT32 Custom2PowerLimit2; + +/** Offset 0x1C78 - Short term Power Limit value for custom cTDP level 3 + Power Limit 1 in Milli Watts. BIOS will round to the nearest 1/8W when programming. + Value set 120 = 15W. 0 = no custom override. Overclocking SKU: Value must be between + Max and Min Power Limits. Other SKUs: This value must be between Min Power Limit + and Processor Base Power (TDP) Limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 32767. +**/ + UINT32 Custom3PowerLimit1; + +/** Offset 0x1C7C - Long term Power Limit value for custom cTDP level 3 + Power Limit 2 value in Milli Watts. BIOS will round to the nearest 1/8W when programming. + Value set 120 = 15W. 0 = no custom override. Processor applies control policies + such that the package power does not exceed this limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 32767. +**/ + UINT32 Custom3PowerLimit2; + +/** Offset 0x1C80 - Platform PL1 power + Platform Power Limit 1 Power in Milli Watts. BIOS will round to the nearest 1/8W + when programming. Value set 120 = 15W. Any value can be programmed between Max + and Min Power Limits. This setting will act as the new PL1 value for the Package + RAPL algorithm. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. Valid Range + 0 to 32767. +**/ + UINT32 PsysPowerLimit1Power; + +/** Offset 0x1C84 - Platform PL2 power + Platform Power Limit 2 Power in Milli Watts. BIOS will round to the nearest 1/8W + when programming. Value set 120 = 15W. Any value can be programmed between Max + and Min Power Limits. This setting will act as the new Max Turbo Power (PL2) value + for the Package RAPL algorithm. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 32767. +**/ + UINT32 PsysPowerLimit2Power; + +/** Offset 0x1C88 - Reserved +**/ + UINT8 Reserved64; + +/** Offset 0x1C89 - Race To Halt + Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency + in order to enter pkg C-State faster to reduce overall power. 0: Disable; <b>1: + Enable</b> + $EN_DIS +**/ + UINT8 RaceToHalt; + +/** Offset 0x1C8A - Reserved +**/ + UINT8 Reserved65; + +/** Offset 0x1C8B - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT + Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 HwpInterruptControl; + +/** Offset 0x1C8C - Reserved +**/ + UINT8 Reserved66[4]; + +/** Offset 0x1C90 - Enable or Disable C1 Cstate Demotion + Enable or Disable C1 Cstate Auto Demotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1StateAutoDemotion; + +/** Offset 0x1C91 - Enable or Disable C1 Cstate UnDemotion + Enable or Disable C1 Cstate Un-Demotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1StateUnDemotion; + +/** Offset 0x1C92 - Minimum Ring ratio limit override + Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo + ratio limit +**/ + UINT8 MinRingRatioLimit; + +/** Offset 0x1C93 - Maximum Ring ratio limit override + Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo + ratio limit +**/ + UINT8 MaxRingRatioLimit; + +/** Offset 0x1C94 - Enable or Disable Per Core P State OS control + Enable/Disable Per Core P state OS control mode. When set, the highest core request + is used for all other core requests. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnablePerCorePState; + +/** Offset 0x1C95 - Enable or Disable HwP Autonomous Per Core P State OS control + Disable Autonomous PCPS Autonomous will request the same value for all cores all + the time. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnableHwpAutoPerCorePstate; + +/** Offset 0x1C96 - Enable or Disable HwP Autonomous EPP Grouping + Enable EPP grouping Autonomous will request the same values for all cores with same + EPP. Disable EPP grouping autonomous will not necessarily request same values for + all cores with same EPP. <b> 0: Disable </b>; 1: Enable + $EN_DIS +**/ + UINT8 EnableHwpAutoEppGrouping; + +/** Offset 0x1C97 - Enable Configurable TDP + Applies cTDP(Assured Power) initialization settings based on non-cTDP(Assured Power) + or cTDP(Assured Power). Default is 1: Applies to cTDP(Assured Power); if 0 then + applies non-cTDP(Assured Power) and BIOS will bypass cTDP(Assured Power) initialzation flow + $EN_DIS +**/ + UINT8 ApplyConfigTdp; + +/** Offset 0x1C98 - Reserved +**/ + UINT8 Reserved67; + +/** Offset 0x1C99 - Dual Tau Boost + Enable Dual Tau Boost feature. This is only applicable for Desktop 35W/65W/125W + sku. When DPTF is enabled this feature is ignored. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 DualTauBoost; + +/** Offset 0x1C9A - Reserved +**/ + UINT8 Reserved68[34]; + +/** Offset 0x1CBC - End of Post message + Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): + EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE + 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x1CBD - D0I3 Setting for HECI Disable + Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all + HECI devices + $EN_DIS +**/ + UINT8 DisableD0I3SettingForHeci; + +/** Offset 0x1CBE - Mctp Broadcast Cycle + Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 MctpBroadcastCycle; + +/** Offset 0x1CBF - ME Unconfig on RTC clear + 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>. + 2: Cmos is clear, status unkonwn. 3: Reserved + 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos + is clear, 3: Reserved +**/ + UINT8 MeUnconfigOnRtcClear; + +/** Offset 0x1CC0 - Enforce Enhanced Debug Mode + Determine if ME should enter Enhanced Debug Mode. <b>0: disable</b>, 1: enable + $EN_DIS +**/ + UINT8 EnforceEDebugMode; + +/** Offset 0x1CC1 - Reserved +**/ + UINT8 Reserved69[17]; + +/** Offset 0x1CD2 - Enable LOCKDOWN SMI + Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. + $EN_DIS +**/ + UINT8 PchLockDownGlobalSmi; + +/** Offset 0x1CD3 - Enable LOCKDOWN BIOS Interface + Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. + $EN_DIS +**/ + UINT8 PchLockDownBiosInterface; + +/** Offset 0x1CD4 - Unlock all GPIO pads + Force all GPIO pads to be unlocked for debug purpose. + $EN_DIS +**/ + UINT8 PchUnlockGpioPads; + +/** Offset 0x1CD5 - PCH Unlock SideBand access + The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before + 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. + $EN_DIS +**/ + UINT8 PchSbAccessUnlock; + +/** Offset 0x1CD6 - Reserved +**/ + UINT8 Reserved70[2]; + +/** Offset 0x1CD8 - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 PcieRpLtrMaxSnoopLatency[29]; + +/** Offset 0x1D12 - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 PcieRpLtrMaxNoSnoopLatency[29]; + +/** Offset 0x1D4C - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 PcieRpSnoopLatencyOverrideMode[29]; + +/** Offset 0x1D69 - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpSnoopLatencyOverrideMultiplier[29]; + +/** Offset 0x1D86 - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 PcieRpSnoopLatencyOverrideValue[29]; + +/** Offset 0x1DC0 - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMode[29]; + +/** Offset 0x1DDD - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[29]; + +/** Offset 0x1DFA - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 PcieRpNonSnoopLatencyOverrideValue[29]; + +/** Offset 0x1E34 - PCIE RP Slot Power Limit Scale + Specifies scale used for slot power limit value. Leave as 0 to set to default. +**/ + UINT8 PcieRpSlotPowerLimitScale[29]; + +/** Offset 0x1E51 - Reserved +**/ + UINT8 Reserved71; + +/** Offset 0x1E52 - PCIE RP Slot Power Limit Value + Specifies upper limit on power supplie by slot. Leave as 0 to set to default. +**/ + UINT16 PcieRpSlotPowerLimitValue[29]; + +/** Offset 0x1E8C - PCIE RP Enable Port8xh Decode + This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PcieEnablePort8xhDecode; + +/** Offset 0x1E8D - PCIE Port8xh Decode Port Index + The Index of PCIe Port that is selected for Port8xh Decode (0 Based). +**/ + UINT8 PchPciePort8xhDecodePortIndex; + +/** Offset 0x1E8E - PCH Energy Reporting + Disable/Enable PCH to CPU energy report feature. + $EN_DIS +**/ + UINT8 PchPmDisableEnergyReport; + +/** Offset 0x1E8F - PCH Sata Test Mode + Allow entrance to the PCH SATA test modes. + $EN_DIS +**/ + UINT8 SataTestMode; + +/** Offset 0x1E90 - PCH USB OverCurrent mapping lock enable + If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning + that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. + $EN_DIS +**/ + UINT8 PchXhciOcLock; + +/** Offset 0x1E91 - Low Power Mode Enable/Disable config mask + Configure if respective S0i2/3 sub-states are to be supported. Each bit corresponds + to one sub-state (LPMx - BITx): LPM0-s0i2.0, LPM1-s0i2.1, LPM2-s0i2.2, LPM3-s0i3.0, + LPM4-s0i3.1, LPM5-s0i3.2, LPM6-s0i3.3, LPM7-s0i3.4. +**/ + UINT8 PmcLpmS0ixSubStateEnableMask; + +/** Offset 0x1E92 - Reserved +**/ + UINT8 Reserved72[105]; + +/** Offset 0x1EFB - PMC C10 dynamic threshold dajustment enable + Set if you want to enable PMC C10 dynamic threshold adjustment. Only works on supported SKUs + $EN_DIS +**/ + UINT8 PmcC10DynamicThresholdAdjustment; + +/** Offset 0x1EFC - Reserved +**/ + UINT8 Reserved73[68]; +} FSP_S_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPS_ARCH2_UPD FspsArchUpd; + +/** Offset 0x0040 +**/ + FSP_S_CONFIG FspsConfig; + +/** Offset 0x1F40 +**/ + UINT8 Rsvd600[6]; + +/** Offset 0x1F46 +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/MemInfoHob.h new file mode 100644 index 0000000000..56af141742 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/meteorlake/x86_64/MemInfoHob.h @@ -0,0 +1,344 @@ +/** @file + This file contains definitions required for creation of + Memory S3 Save data, Memory Info data and Memory Platform + data hobs. + +@copyright + INTEL CONFIDENTIAL + Copyright 1999 - 2022 Intel Corporation. + + The source code contained or described herein and all documents related to the + source code ("Material") are owned by Intel Corporation or its suppliers or + licensors. Title to the Material remains with Intel Corporation or its suppliers + and licensors. The Material may contain trade secrets and proprietary and + confidential information of Intel Corporation and its suppliers and licensors, + and is protected by worldwide copyright and trade secret laws and treaty + provisions. No part of the Material may be used, copied, reproduced, modified, + published, uploaded, posted, transmitted, distributed, or disclosed in any way + without Intel's prior express written permission. + + No license under any patent, copyright, trade secret or other intellectual + property right is granted to or conferred upon you by disclosure or delivery + of the Materials, either expressly, by implication, inducement, estoppel or + otherwise. Any license under such intellectual property rights must be + express and approved by Intel in writing. + + Unless otherwise agreed by Intel in writing, you may not remove or alter + this notice or any other notice embedded in Materials by Intel or + Intel's suppliers or licensors in any way. + + This file contains an 'Intel Peripheral Driver' and is uniquely identified as + "Intel Reference Module" and is licensed for Intel CPUs and chipsets under + the terms of your license agreement with Intel or your vendor. This file may + be modified by the user, subject to additional terms of the license agreement. + +@par Specification Reference: +**/ +#ifndef _MEM_INFO_HOB_H_ +#define _MEM_INFO_HOB_H_ + + +#pragma pack (push, 1) + +extern EFI_GUID gSiMemoryS3DataGuid; +extern EFI_GUID gSiMemoryS3Data2Guid; +extern EFI_GUID gSiMemoryInfoDataGuid; +extern EFI_GUID gSiMemoryPlatformDataGuid; + +#define MAX_NODE 2 +#define MAX_CH 4 +#define MAX_DDR5_CH 2 +#define MAX_DIMM 2 +// Must match definitions in +// Intel\ClientOneSiliconPkg\IpBlock\MemoryInit\Mtl\Include\MrcInterface.h +#define HOB_MAX_SAGV_POINTS 4 + +/// +/// Host reset states from MRC. +/// +#define WARM_BOOT 2 + +#define R_MC_CHNL_RANK_PRESENT 0x7C +#define B_RANK0_PRS BIT0 +#define B_RANK1_PRS BIT1 +#define B_RANK2_PRS BIT4 +#define B_RANK3_PRS BIT5 + +// @todo remove and use the MdePkg\Include\Pi\PiHob.h +#if !defined(_PEI_HOB_H_) && !defined(__PI_HOB_H__) +#ifndef __HOB__H__ +typedef struct _EFI_HOB_GENERIC_HEADER { + UINT16 HobType; + UINT16 HobLength; + UINT32 Reserved; +} EFI_HOB_GENERIC_HEADER; + +typedef struct _EFI_HOB_GUID_TYPE { + EFI_HOB_GENERIC_HEADER Header; + EFI_GUID Name; + /// + /// Guid specific data goes here + /// +} EFI_HOB_GUID_TYPE; +#endif +#endif + +/// +/// Defines taken from MRC so avoid having to include MrcInterface.h +/// + +// +// Matches MAX_SPD_SAVE define in MRC +// +#ifndef MAX_SPD_SAVE +#define MAX_SPD_SAVE 29 +#endif + +// +// MRC version description. +// +typedef struct { + UINT8 Major; ///< Major version number + UINT8 Minor; ///< Minor version number + UINT8 Rev; ///< Revision number + UINT8 Build; ///< Build number +} SiMrcVersion; + +// +// Matches MrcChannelSts enum in MRC +// +#ifndef CHANNEL_NOT_PRESENT +#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller. +#endif +#ifndef CHANNEL_DISABLED +#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled. +#endif +#ifndef CHANNEL_PRESENT +#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled. +#endif + +// +// Matches MrcDimmSts enum in MRC +// +#ifndef DIMM_ENABLED +#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected. +#endif +#ifndef DIMM_DISABLED +#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence. +#endif +#ifndef DIMM_PRESENT +#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used. +#endif +#ifndef DIMM_NOT_PRESENT +#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair. +#endif + +// +// Matches MrcBootMode enum in MRC +// +#ifndef __MRC_BOOT_MODE__ +#define __MRC_BOOT_MODE__ //The below values are originated from MrcCommonTypes.h + #ifndef INT32_MAX + #define INT32_MAX (0x7FFFFFFF) + #endif //INT32_MAX +typedef enum { + bmCold, ///< Cold boot + bmWarm, ///< Warm boot + bmS3, ///< S3 resume + bmFast, ///< Fast boot + MrcBootModeMax, ///< MRC_BOOT_MODE enumeration maximum value. + MrcBootModeDelim = INT32_MAX ///< This value ensures the enum size is consistent on both sides of the PPI. +} MRC_BOOT_MODE; +#endif //__MRC_BOOT_MODE__ + +// +// Matches MrcDdrType enum in MRC +// +#ifndef MRC_DDR_TYPE_DDR5 +#define MRC_DDR_TYPE_DDR5 1 +#endif +#ifndef MRC_DDR_TYPE_LPDDR5 +#define MRC_DDR_TYPE_LPDDR5 2 +#endif +#ifndef MRC_DDR_TYPE_LPDDR4 +#define MRC_DDR_TYPE_LPDDR4 3 +#endif +#ifndef MRC_DDR_TYPE_UNKNOWN +#define MRC_DDR_TYPE_UNKNOWN 4 +#endif + +#define MAX_PROFILE_NUM 7 // number of memory profiles supported +#define MAX_XMP_PROFILE_NUM 5 // number of XMP profiles supported + +#ifndef MAX_RCOMP_TARGETS +#define MAX_RCOMP_TARGETS 5 +#endif + +#ifndef MAX_ODT_ENTRIES +#define MAX_ODT_ENTRIES 11 +#endif + +#define MAX_TRACE_REGION 5 +#define MAX_TRACE_CACHE_TYPE 2 + +// +// DIMM timings +// +typedef struct { + UINT32 tCK; ///< Memory cycle time, in femtoseconds. + UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. + UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. + UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. + UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. + UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. + UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. + UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. + UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time. + UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. + UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. + UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. + UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. + UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. + UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. + UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. + UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. + UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. + UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group. + UINT16 tCCD_L_WR; ///< Number of tCK cycles for the channel DIMM's minimum Write-to-Write delay for same bank group. +} MRC_CH_TIMING; + +typedef struct { + UINT16 tRDPRE; ///< Read CAS to Precharge cmd delay +} MRC_IP_TIMING; + +/// +/// Memory SMBIOS & OC Memory Data Hob +/// +typedef struct { + UINT8 Status; ///< See MrcDimmStatus for the definition of this field. + UINT8 DimmId; + UINT32 DimmCapacity; ///< DIMM size in MBytes. + UINT16 MfgId; + UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DDR4 20 bytes as per JEDEC Spec, so reserving 20 bytes + UINT8 RankInDimm; ///< The number of ranks in this DIMM. + UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. + UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. + UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. + UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. + UINT16 Speed; ///< The maximum capable speed of the device, in MHz + UINT8 MdSocket; ///< MdSocket: 0 = Memory Down, 1 = Socketed. Needed for SMBIOS structure creation. +} DIMM_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this channel should be used. + UINT8 ChannelId; + UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. + MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. + DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. +} CHANNEL_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this controller should be used. + UINT16 DeviceId; ///< The PCI device id of this memory controller. + UINT8 RevisionId; ///< The PCI revision id of this memory controller. + UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. + CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. +} CONTROLLER_INFO; + +typedef struct { + UINT64 BaseAddress; ///< Trace Base Address + UINT64 TotalSize; ///< Total Trace Region of Same Cache type + UINT8 CacheType; ///< Trace Cache Type + UINT8 ErrorCode; ///< Trace Region Allocation Fail Error code + UINT8 Rsvd[2]; +} PSMI_MEM_INFO; + +/// This data structure contains per-SaGv timing values that are considered output by the MRC. +typedef struct { + UINT32 DataRate; ///< The memory rate for the current SaGv Point in units of MT/s + MRC_CH_TIMING JedecTiming; ///< Timings used for this entry's corresponding SaGv Point - derived from JEDEC SPD spec + MRC_IP_TIMING IpTiming; ///< Timings used for this entry's corresponding SaGv Point - IP specific +} HOB_SAGV_TIMING_OUT; + +/// This data structure contains SAGV config values that are considered output by the MRC. +typedef struct { + UINT32 NumSaGvPointsEnabled; ///< Count of the total number of SAGV Points enabled. + UINT32 SaGvPointMask; ///< Bit mask where each bit indicates an enabled SAGV point. + HOB_SAGV_TIMING_OUT SaGvTiming[HOB_MAX_SAGV_POINTS]; +} HOB_SAGV_INFO; + +typedef struct { + UINT8 Revision; + UINT16 DataWidth; ///< Data width, in bits, of this memory device + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 + UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) + UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + + SiMrcVersion Version; + BOOLEAN EccSupport; + UINT8 MemoryProfile; + UINT32 TotalPhysicalMemorySize; + UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. + UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. + UINT8 XmpConfigWarning; ///< If XMP capable DIMMs config support only 1DPC, but 2DPC is installed + BOOLEAN DynamicMemoryBoostTrainingFailed; ///< TRUE if Dynamic Memory Boost failed to train and was force disabled on the last full training boot. FALSE otherwise. + UINT16 Ratio; ///< DDR Frequency Ratio, used for programs that require ratios higher then 255 + UINT8 RefClk; + UINT32 VddVoltage[MAX_PROFILE_NUM]; + UINT32 VddqVoltage[MAX_PROFILE_NUM]; + UINT32 VppVoltage[MAX_PROFILE_NUM]; + UINT16 RcompTarget[MAX_PROFILE_NUM][MAX_RCOMP_TARGETS]; + UINT16 DimmOdt[MAX_PROFILE_NUM][MAX_DIMM][MAX_ODT_ENTRIES]; + CONTROLLER_INFO Controller[MAX_NODE]; + UINT32 NumPopulatedChannels; ///< Total number of memory channels populated + HOB_SAGV_INFO SagvConfigInfo; ///< This data structure contains SAGV config values that are considered output by the MRC. + BOOLEAN IsIbeccEnabled; + UINT16 TotalMemWidth; ///< Total Memory Width in bits from all populated channels + UINT16 PprDetectedErrors; ///< PPR: Counts of detected bad rows + UINT16 PprRepairFails; ///< PPR: Counts of repair failure + UINT16 PprForceRepairStatus; ///< PPR: Force Repair Status +} MEMORY_INFO_DATA_HOB; + +/** + Memory Platform Data Hob + + <b>Revision 1:</b> + - Initial version. + <b>Revision 2:</b> + - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields +**/ +typedef struct { + UINT8 Revision; + UINT8 Reserved[3]; + UINT32 BootMode; + UINT32 TsegSize; + UINT32 TsegBase; + UINT32 PrmrrSize; + UINT64 PrmrrBase; + UINT32 GttBase; + UINT32 MmioSize; + UINT32 PciEBaseAddress; + PSMI_MEM_INFO PsmiInfo[MAX_TRACE_CACHE_TYPE]; + PSMI_MEM_INFO PsmiRegionInfo[MAX_TRACE_REGION]; + BOOLEAN MrcBasicMemoryTestPass; +} MEMORY_PLATFORM_DATA; + +typedef struct { + EFI_HOB_GUID_TYPE EfiHobGuidType; + MEMORY_PLATFORM_DATA Data; + UINT8 *Buffer; +} MEMORY_PLATFORM_DATA_HOB; + +#pragma pack (pop) + +#endif // _MEM_INFO_HOB_H_ |