summaryrefslogtreecommitdiff
path: root/src/vendorcode
diff options
context:
space:
mode:
authorSrinidhi N Kaushik <srinidhi.n.kaushik@intel.com>2021-05-21 16:16:05 -0700
committerFelix Held <felix-coreboot@felixheld.de>2021-05-28 18:25:26 +0000
commiteab9290b5f77880bfefd0215ffb7e9844c76b5a2 (patch)
treeeade09511983ecf8364b765f83fa375d6828f3bc /src/vendorcode
parent05b6b37a7c8703416d6ebfaaa860f3b2dad33fa0 (diff)
vendorcode/intel/fsp: Update to include post PRQ UPDs for Tiger Lake
Update FSP headers for Tiger Lake platform generated based on FSP version 4133 to include post PRQ UPDs. BUG=b:188452018 BRANCH=none TEST=build voxel Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I493391294391c1222a1aa5fdb86baad968abf7a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54811 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/vendorcode')
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h1184
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h1155
2 files changed, 2138 insertions, 201 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
index e84b34f49d..6210f3c5cb 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspmUpd.h
@@ -248,9 +248,9 @@ typedef struct {
**/
UINT8 TrainTrace;
-/** Offset 0x012D - Reserved
+/** Offset 0x012D
**/
- UINT8 Reserved0[3];
+ UINT8 UnusedUpdSpace0[3];
/** Offset 0x0130 - Intel Enhanced Debug
<b>@deprecated</b> - Not used and has no effect
@@ -346,9 +346,17 @@ typedef struct {
**/
UINT8 PchTraceHubMemReg1Size;
-/** Offset 0x0154 - Reserved
+/** Offset 0x0154 - HD Audio DMIC Link Clock Select
+ Determines DMIC<N> Clock Source. 0: Both, 1: ClkA, 2: ClkB
+ 0: Both, 1: ClkA, 2: ClkB
**/
- UINT8 Reserved1[7];
+ UINT8 PchHdaAudioLinkDmicClockSelect[2];
+
+/** Offset 0x0156 - PchPreMemRsvd
+ Reserved for PCH Pre-Mem Reserved
+ $EN_DIS
+**/
+ UINT8 PchPreMemRsvd[5];
/** Offset 0x015B - State of X2APIC_OPT_OUT bit in the DMAR table
0=Disable/Clear, 1=Enable/Set
@@ -362,9 +370,9 @@ typedef struct {
**/
UINT8 DmaControlGuarantee;
-/** Offset 0x015D - Reserved
+/** Offset 0x015D
**/
- UINT8 Reserved2[3];
+ UINT8 UnusedUpdSpace1[3];
/** Offset 0x0160 - Base addresses for VT-d function MMIO access
Base addresses for VT-d MMIO access per VT-d engine
@@ -432,9 +440,9 @@ typedef struct {
**/
UINT8 UserBd;
-/** Offset 0x018D - Reserved
+/** Offset 0x018D
**/
- UINT8 Reserved3;
+ UINT8 UnusedUpdSpace2;
/** Offset 0x018E - DDR Frequency Limit
Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867,
@@ -519,9 +527,9 @@ typedef struct {
**/
UINT8 RefClk;
-/** Offset 0x019F - Reserved
+/** Offset 0x019F
**/
- UINT8 Reserved4;
+ UINT8 UnusedUpdSpace3;
/** Offset 0x01A0 - Memory Voltage
DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM
@@ -550,9 +558,9 @@ typedef struct {
**/
UINT8 tCWL;
-/** Offset 0x01A5 - Reserved
+/** Offset 0x01A5
**/
- UINT8 Reserved5;
+ UINT8 UnusedUpdSpace4;
/** Offset 0x01A6 - tFAW
Min Four Activate Window Delay Time, 0: AUTO, max: 63. Only used if FspmUpd->FspmConfig.SpdProfileSelected
@@ -572,9 +580,9 @@ typedef struct {
**/
UINT8 tRCDtRP;
-/** Offset 0x01AB - Reserved
+/** Offset 0x01AB
**/
- UINT8 Reserved6;
+ UINT8 UnusedUpdSpace5;
/** Offset 0x01AC - tREFI
Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected
@@ -653,9 +661,20 @@ typedef struct {
**/
UINT8 CpuTraceHubMemReg1Size;
-/** Offset 0x01BA - Reserved
+/** Offset 0x01BA - SAGV Gear Ratio
+ Gear Selection for SAGV points. 0 - Auto, 1-1 Gear 1, 2-Gear 2
+**/
+ UINT8 SaGvGear[4];
+
+/** Offset 0x01BE - SAGV Frequency
+ SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300.
+**/
+ UINT16 SaGvFreq[4];
+
+/** Offset 0x01C6 - SAGV Disabled Gear Ratio
+ Gear Selection for SAGV Disabled. 0 - Auto, 1-1 Gear 1, 2-Gear 2
**/
- UINT8 Reserved7[13];
+ UINT8 GearRatio;
/** Offset 0x01C7 - HECI Timeouts
0: Disable, 1: Enable (Default) timeout check for HECI
@@ -716,9 +735,9 @@ typedef struct {
**/
UINT8 PsmiRegionSize;
-/** Offset 0x01DD - Reserved
+/** Offset 0x01DD
**/
- UINT8 Reserved8[3];
+ UINT8 UnusedUpdSpace6[3];
/** Offset 0x01E0 - Temporary MMIO address for GMADR
Obsolete field now and it has been extended to 64 bit address, used GmAdr64
@@ -739,9 +758,14 @@ typedef struct {
**/
UINT16 GttSize;
-/** Offset 0x01EA - Reserved
+/** Offset 0x01EA
**/
- UINT8 Reserved9[98];
+ UINT8 UnusedUpdSpace7[2];
+
+/** Offset 0x01EC - Hybrid Graphics GPIO information for PEG 0
+ Hybrid Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs
+**/
+ UINT32 CpuPcie0Rtd3Gpio[24];
/** Offset 0x024C - Enable/Disable MRC TXT dependency
When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default):
@@ -824,9 +848,9 @@ typedef struct {
**/
UINT8 ImguClkOutEn[6];
-/** Offset 0x0263 - Reserved
+/** Offset 0x0263
**/
- UINT8 Reserved10;
+ UINT8 UnusedUpdSpace8;
/** Offset 0x0264 - Enable PCIE RP Mask
Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
@@ -834,9 +858,12 @@ typedef struct {
**/
UINT32 CpuPcieRpEnableMask;
-/** Offset 0x0268 - Reserved
+/** Offset 0x0268 - Assertion on Link Down GPIOs
+ GPIO Assertion on Link Down. Disabled(0x0)(Default): Disable assertion on Link Down
+ GPIOs, Enabled(0x1): Enable assertion on Link Down GPIOs
+ 0:Disable, 1:Enable
**/
- UINT8 Reserved11;
+ UINT8 CpuPcieRpLinkDownGpios;
/** Offset 0x0269 - RpClockReqMsgEnable
**/
@@ -852,9 +879,17 @@ typedef struct {
**/
UINT8 GtPsmiSupport;
-/** Offset 0x026F - Reserved
+/** Offset 0x026F - Selection of DiSM Region Size
+ DiSM Size to be allocated for 2LM Sku Default is 0
+ 0:0GB, 1:1GB, 2:2GB, 3:3GB, 4:4GB, 5:5GB, 6:6GB, 7:7GB
+**/
+ UINT8 DismSize;
+
+/** Offset 0x0270 - Enable Display memory map programming for DFD Restore
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
**/
- UINT8 Reserved12[2];
+ UINT8 DfdRestoreEnable;
/** Offset 0x0271 - Program GPIOs for LFP on DDI port-A device
0=Disabled,1(Default)=eDP, 2=MIPI DSI
@@ -952,9 +987,80 @@ typedef struct {
**/
UINT8 DdiPort4Ddc;
-/** Offset 0x0281 - Reserved
+/** Offset 0x0281 - Enable Gt CLOS
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 GtClosEnable;
+
+/** Offset 0x0282
+**/
+ UINT8 UnusedUpdSpace9[6];
+
+/** Offset 0x0288 - Temporary MMIO address for GMADR
+ The reference code will use this as Temporary MMIO address space to access GMADR
+ Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to
+ (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress
+ - 0x1) (Where ApertureSize = 256MB, 512MB, 1024MB and 2048MB)
+**/
+ UINT64 GmAdr64;
+
+/** Offset 0x0290 - Hybrid Graphics Slot Selection
+ PEG or PCH Slot Selection for Hybrid Graphics
+**/
+ UINT8 HgSlot;
+
+/** Offset 0x0291 - DMI ASPM Configuration:{Combo
+ Set ASPM Configuration
+ 0:Disabled, 1:L0s, 2:L1, 3:L1L0s
+**/
+ UINT8 DmiAspm;
+
+/** Offset 0x0292 - DMI ASPM Control Configuration:{Combo
+ Set ASPM Control configuration
+ 0:Disabled, 1:L0s, 2:L1, 3:L1L0s
**/
- UINT8 Reserved13[121];
+ UINT8 DmiAspmCtrl;
+
+/** Offset 0x0293 - DMI ASPM L1 exit Latency
+ Range: 0-7, 4 is default L1 exit Latency
+**/
+ UINT8 DmiAspmL1ExitLatency;
+
+/** Offset 0x0294 - Per-core HT Disable
+ Defines the per-core HT disable mask where: 1 - Disable selected logical core HT,
+ 0 - is ignored. Input is in HEX and each bit maps to a logical core. Ex. A value
+ of '1F' would disable HT for cores 4,3,2,1 and 0. Default is 0, all cores have
+ HT enabled. Range is 0 - 0x7F for max 8 cores. You can only disable up to MAX_CORE_COUNT - 1.
+**/
+ UINT16 PerCoreHtDisable;
+
+/** Offset 0x0296 - DEKEL CDR Relock
+ Enable/Disable CDR Relock. 0: Disable(Default); 1: Enable
+**/
+ UINT8 CpuPcieRpCdrRelock[4];
+
+/** Offset 0x029A - Realtime Memory OverClock
+ Disable/Enables Realtime Memory OverClock
+ $EN_DIS
+**/
+ UINT8 RealtimeMemoryOC;
+
+/** Offset 0x029B - Xl1el
+ Enable/Disable NewFom for DEKEL Programming. 0: Disable(Default); 1: Enable
+**/
+ UINT8 CpuPcieNewFom[4];
+
+/** Offset 0x029F - Xl1el
+ Enable/Disable NewFomDisable. 0: Disable(Default); 1: Enable
+**/
+ UINT8 CpuPcieIotgMode[4];
+
+/** Offset 0x02A3 - SaPreMemProductionRsvd
+ Reserved for SA Pre-Mem Production
+ $EN_DIS
+**/
+ UINT8 SaPreMemProductionRsvd[87];
/** Offset 0x02FA - DMI Max Link Speed
Auto (0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 Speed, Gen2(0x2):
@@ -1203,9 +1309,15 @@ typedef struct {
**/
UINT8 CpuCrashLogEnable;
-/** Offset 0x0340 - Reserved
+/** Offset 0x0340 - ElixirSpringsPatchAddr
+ DEPRECATED
**/
- UINT8 Reserved14[8];
+ UINT32 ElixirSpringsPatchAddr;
+
+/** Offset 0x0344 - ElixirSpringsPatchSize
+ DEPRECATED
+**/
+ UINT32 ElixirSpringsPatchSize;
/** Offset 0x0348 - CPU Run Control
Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2:
@@ -1242,9 +1354,9 @@ typedef struct {
**/
UINT8 Txt;
-/** Offset 0x034E - Reserved
+/** Offset 0x034E
**/
- UINT8 Reserved15[2];
+ UINT8 UnusedUpdSpace10[2];
/** Offset 0x0350 - PrmrrSize
Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable
@@ -1312,9 +1424,11 @@ typedef struct {
**/
UINT8 ConfigTdpLevel;
-/** Offset 0x038A - Reserved
+/** Offset 0x038A - ReservedSecurityPreMem
+ Reserved for Security Pre-Mem
+ $EN_DIS
**/
- UINT8 Reserved16[5];
+ UINT8 ReservedSecurityPreMem[5];
/** Offset 0x038F - Enable PCH HSIO PCIE Rx Set Ctle
Enable PCH PCIe Gen 3 Set CTLE Value.
@@ -1499,9 +1613,9 @@ typedef struct {
**/
UINT8 PchNumRsvdSmbusAddresses;
-/** Offset 0x0573 - Reserved
+/** Offset 0x0573
**/
- UINT8 Reserved17;
+ UINT8 UnusedUpdSpace11;
/** Offset 0x0574 - SMBUS Base Address
SMBUS Base Address (IO space).
@@ -1525,9 +1639,14 @@ typedef struct {
**/
UINT8 PcieClkSrcClkReq[16];
-/** Offset 0x0597 - Reserved
+/** Offset 0x0597
**/
- UINT8 Reserved18[5];
+ UINT8 UnusedUpdSpace12;
+
+/** Offset 0x0598 - Point of RsvdSmbusAddressTable
+ Array of addresses reserved for non-ARP-capable SMBus devices.
+**/
+ UINT32 RsvdSmbusAddressTablePtr;
/** Offset 0x059C - Enable PCIE RP Mask
Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0
@@ -1554,9 +1673,9 @@ typedef struct {
**/
UINT8 SerialIoUartDebugAutoFlow;
-/** Offset 0x05A3 - Reserved
+/** Offset 0x05A3
**/
- UINT8 Reserved19;
+ UINT8 UnusedUpdSpace13;
/** Offset 0x05A4 - Serial Io Uart Debug BaudRate
Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600,
@@ -1582,9 +1701,15 @@ typedef struct {
**/
UINT8 SerialIoUartDebugDataBits;
-/** Offset 0x05AB - Reserved
+/** Offset 0x05AB
+**/
+ UINT8 UnusedUpdSpace14;
+
+/** Offset 0x05AC - Serial Io Uart Debug Mmio Base
+ Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode
+ = SerialIoUartPci.
**/
- UINT8 Reserved20[5];
+ UINT32 SerialIoUartDebugMmioBase;
/** Offset 0x05B0 - ISA Serial Base selection
Select ISA Serial Base address. Default is 0x3F8.
@@ -1871,9 +1996,43 @@ typedef struct {
**/
UINT8 EccSupport;
-/** Offset 0x05E0 - Reserved
+/** Offset 0x05E0 - Ibecc
+ In-Band ECC Support
+ $EN_DIS
**/
- UINT8 Reserved21[44];
+ UINT8 Ibecc;
+
+/** Offset 0x05E1 - IbeccParity
+ In-Band ECC Parity Control
+ $EN_DIS
+**/
+ UINT8 IbeccParity;
+
+/** Offset 0x05E2 - IbeccOperationMode
+ In-Band ECC Operation Mode
+ 0:Protect base on address range, 1: Non-protected, 2: All protected
+**/
+ UINT8 IbeccOperationMode;
+
+/** Offset 0x05E3 - IbeccProtectedRegionEnable
+ In-Band ECC Protected Region Enable
+ $EN_DIS
+**/
+ UINT8 IbeccProtectedRegionEnable[8];
+
+/** Offset 0x05EB
+**/
+ UINT8 UnusedUpdSpace15[1];
+
+/** Offset 0x05EC - IbeccProtectedRegionBases
+ IBECC Protected Region Bases
+**/
+ UINT16 IbeccProtectedRegionBase[8];
+
+/** Offset 0x05FC - IbeccProtectedRegionMasks
+ IBECC Protected Region Masks
+**/
+ UINT16 IbeccProtectedRegionMask[8];
/** Offset 0x060C - Memory Remap
Enables/Disable Memory Remap
@@ -1948,9 +2107,17 @@ typedef struct {
**/
UINT8 ExitOnFailure;
-/** Offset 0x0618 - Reserved
+/** Offset 0x0618 - New Features 1 - MRC
+ New Feature Enabling 1, <b>0:Disable</b>, 1:Enable
+ 0:Disable, 1:Enable
+**/
+ UINT8 NewFeatureEnable1;
+
+/** Offset 0x0619 - New Features 2 - MRC
+ New Feature Enabling 2, <b>0:Disable</b>, 1:Enable
+ 0:Disable, 1:Enable
**/
- UINT8 Reserved22[2];
+ UINT8 NewFeatureEnable2;
/** Offset 0x061A - Duty Cycle Correction Training
Enable/Disable Duty Cycle Correction Training
@@ -2000,9 +2167,35 @@ typedef struct {
**/
UINT8 TXTCODQS;
-/** Offset 0x0622 - Reserved
+/** Offset 0x0622 - CMD/CTL Drive Strength Up/Dn 2D
+ Enable/Disable CMD/CTL Drive Strength Up/Dn 2D
+ $EN_DIS
+**/
+ UINT8 CMDDRUD;
+
+/** Offset 0x0623 - VccDLL Bypass Training
+ Enable/Disable VccDLL Bypass Training
+ $EN_DIS
+**/
+ UINT8 VCCDLLBP;
+
+/** Offset 0x0624 - PanicVttDnLp Training
+ Enable/Disable PanicVttDnLp Training
+ $EN_DIS
+**/
+ UINT8 PVTTDNLP;
+
+/** Offset 0x0625 - Read Vref Decap Training*
+ Enable/Disable Read Vref Decap Training*
+ $EN_DIS
**/
- UINT8 Reserved23[5];
+ UINT8 RDVREFDC;
+
+/** Offset 0x0626 - Vddq Training
+ Enable/Disable Vddq Training
+ $EN_DIS
+**/
+ UINT8 VDDQT;
/** Offset 0x0627 - Rank Margin Tool Per Bit
Enable/Disable Rank Margin Tool Per Bit
@@ -2010,9 +2203,15 @@ typedef struct {
**/
UINT8 RMTBIT;
-/** Offset 0x0628 - Reserved
+/** Offset 0x0628 - Override Performance Downgrade for Mixed Memory
+ Disable/Enables Override Performance Downgrade for Mixed Memory
+ $EN_DIS
**/
- UINT8 Reserved24[2];
+ UINT8 OverrideDowngradeForMixedMemory;
+
+/** Offset 0x0629
+**/
+ UINT8 Reserved2[1];
/** Offset 0x062A - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP
@@ -2033,9 +2232,9 @@ typedef struct {
**/
UINT8 ChHashInterleaveBit;
-/** Offset 0x062D - Reserved
+/** Offset 0x062D
**/
- UINT8 Reserved25;
+ UINT8 UnusedUpdSpace16;
/** Offset 0x062E - Ch Hash Mask
Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to
@@ -2066,9 +2265,205 @@ typedef struct {
**/
UINT8 RhActProbability;
-/** Offset 0x0639 - Reserved
+/** Offset 0x0639 - Idle Energy Mc0Ch0Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc0Ch0Dimm0;
+
+/** Offset 0x063A - Idle Energy Mc0Ch0Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
**/
- UINT8 Reserved26[40];
+ UINT8 IdleEnergyMc0Ch0Dimm1;
+
+/** Offset 0x063B - Idle Energy Mc0Ch1Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc0Ch1Dimm0;
+
+/** Offset 0x063C - Idle Energy Mc0Ch1Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc0Ch1Dimm1;
+
+/** Offset 0x063D - Idle Energy Mc1Ch0Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc1Ch0Dimm0;
+
+/** Offset 0x063E - Idle Energy Mc1Ch0Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc1Ch0Dimm1;
+
+/** Offset 0x063F - Idle Energy Mc1Ch1Dimm0
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc1Ch1Dimm0;
+
+/** Offset 0x0640 - Idle Energy Mc1Ch1Dimm1
+ Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def)
+**/
+ UINT8 IdleEnergyMc1Ch1Dimm1;
+
+/** Offset 0x0641 - PowerDown Energy Mc0Ch0Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc0Ch0Dimm0;
+
+/** Offset 0x0642 - PowerDown Energy Mc0Ch0Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc0Ch0Dimm1;
+
+/** Offset 0x0643 - PowerDown Energy Mc0Ch1Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc0Ch1Dimm0;
+
+/** Offset 0x0644 - PowerDown Energy Mc0Ch1Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc0Ch1Dimm1;
+
+/** Offset 0x0645 - PowerDown Energy Mc1Ch0Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc1Ch0Dimm0;
+
+/** Offset 0x0646 - PowerDown Energy Mc1Ch0Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc1Ch0Dimm1;
+
+/** Offset 0x0647 - PowerDown Energy Mc1Ch1Dimm0
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc1Ch1Dimm0;
+
+/** Offset 0x0648 - PowerDown Energy Mc1Ch1Dimm1
+ PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def)
+**/
+ UINT8 PdEnergyMc1Ch1Dimm1;
+
+/** Offset 0x0649 - Activate Energy Mc0Ch0Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc0Ch0Dimm0;
+
+/** Offset 0x064A - Activate Energy Mc0Ch0Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc0Ch0Dimm1;
+
+/** Offset 0x064B - Activate Energy Mc0Ch1Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc0Ch1Dimm0;
+
+/** Offset 0x064C - Activate Energy Mc0Ch1Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc0Ch1Dimm1;
+
+/** Offset 0x064D - Activate Energy Mc1Ch0Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc1Ch0Dimm0;
+
+/** Offset 0x064E - Activate Energy Mc1Ch0Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc1Ch0Dimm1;
+
+/** Offset 0x064F - Activate Energy Mc1Ch1Dimm0
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc1Ch1Dimm0;
+
+/** Offset 0x0650 - Activate Energy Mc1Ch1Dimm1
+ Activate Energy Contribution, range[255;0],(172= Def)
+**/
+ UINT8 ActEnergyMc1Ch1Dimm1;
+
+/** Offset 0x0651 - Read Energy Mc0Ch0Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc0Ch0Dimm0;
+
+/** Offset 0x0652 - Read Energy Mc0Ch0Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc0Ch0Dimm1;
+
+/** Offset 0x0653 - Read Energy Mc0Ch1Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc0Ch1Dimm0;
+
+/** Offset 0x0654 - Read Energy Mc0Ch1Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc0Ch1Dimm1;
+
+/** Offset 0x0655 - Read Energy Mc1Ch0Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc1Ch0Dimm0;
+
+/** Offset 0x0656 - Read Energy Mc1Ch0Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc1Ch0Dimm1;
+
+/** Offset 0x0657 - Read Energy Mc1Ch1Dimm0
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc1Ch1Dimm0;
+
+/** Offset 0x0658 - Read Energy Mc1Ch1Dimm1
+ Read Energy Contribution, range[255;0],(212= Def)
+**/
+ UINT8 RdEnergyMc1Ch1Dimm1;
+
+/** Offset 0x0659 - Write Energy Mc0Ch0Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc0Ch0Dimm0;
+
+/** Offset 0x065A - Write Energy Mc0Ch0Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc0Ch0Dimm1;
+
+/** Offset 0x065B - Write Energy Mc0Ch1Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc0Ch1Dimm0;
+
+/** Offset 0x065C - Write Energy Mc0Ch1Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc0Ch1Dimm1;
+
+/** Offset 0x065D - Write Energy Mc1Ch0Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc1Ch0Dimm0;
+
+/** Offset 0x065E - Write Energy Mc1Ch0Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc1Ch0Dimm1;
+
+/** Offset 0x065F - Write Energy Mc1Ch1Dimm0
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc1Ch1Dimm0;
+
+/** Offset 0x0660 - Write Energy Mc1Ch1Dimm1
+ Write Energy Contribution, range[255;0],(221= Def)
+**/
+ UINT8 WrEnergyMc1Ch1Dimm1;
/** Offset 0x0661 - Throttler CKEMin Timer
Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4).
@@ -2124,9 +2519,11 @@ typedef struct {
**/
UINT8 UserBudgetEnable;
-/** Offset 0x066A - Reserved
+/** Offset 0x066A - Power Down Mode
+ This option controls command bus tristating during idle periods
+ 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto
**/
- UINT8 Reserved27;
+ UINT8 PowerDownMode;
/** Offset 0x066B - Pwr Down Idle Timer
The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means
@@ -2134,9 +2531,11 @@ typedef struct {
**/
UINT8 PwdwnIdleCounter;
-/** Offset 0x066C - Reserved
+/** Offset 0x066C - Page Close Idle Timeout
+ This option controls Page Close Idle Timeout
+ 0:Enabled, 1:Disabled
**/
- UINT8 Reserved28;
+ UINT8 DisPgCloseIdleTimeout;
/** Offset 0x066D - Bitmask of ranks that have CA bus terminated
Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default,
@@ -2188,9 +2587,9 @@ typedef struct {
**/
UINT8 UsbTcPortEnPreMem;
-/** Offset 0x0675 - Reserved
+/** Offset 0x0675
**/
- UINT8 Reserved29;
+ UINT8 UnusedUpdSpace17;
/** Offset 0x0676 - Post Code Output Port
This option configures Post Code Output Port
@@ -2208,9 +2607,22 @@ typedef struct {
**/
UINT8 CridEnable;
-/** Offset 0x067A - Reserved
+/** Offset 0x067A - WRC Feature
+ Enable/Disable WRC (Write Cache) feature of IOP. When feature is enabled, supports
+ IO devices allocating onto the ring and into LLC. WRC is fused on by default.
+ $EN_DIS
**/
- UINT8 Reserved30[18];
+ UINT8 WrcFeatureEnable;
+
+/** Offset 0x067B
+**/
+ UINT8 UnusedUpdSpace18[1];
+
+/** Offset 0x067C - BCLK RFI Frequency
+ Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No
+ RFI Tuning</b>. Range is 98Mhz-100Mhz.
+**/
+ UINT32 BclkRfiFreq[4];
/** Offset 0x068C - Size of PCIe IMR.
Size of PCIe IMR in megabytes
@@ -2223,9 +2635,18 @@ typedef struct {
**/
UINT8 PcieImrEnabled;
-/** Offset 0x068F - Reserved
+/** Offset 0x068F - Enable PCIe IMR
+ 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select
+ the Root port location from PCH PCIe or SA PCIe
+ $EN_DIS
+**/
+ UINT8 PcieImrRpLocation;
+
+/** Offset 0x0690 - Root port number for IMR.
+ Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port
+ from 0 to 23 and if it is SA PCIe then select root port from 0 to 3
**/
- UINT8 Reserved31[2];
+ UINT8 PcieImrRpSelection;
/** Offset 0x0691 - SerialDebugMrcLevel
MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load,
@@ -2236,9 +2657,95 @@ typedef struct {
**/
UINT8 SerialDebugMrcLevel;
-/** Offset 0x0692 - Reserved
+/** Offset 0x0692 - Mem Boot Mode
+ 0: BOOT_MODE_1LM(Default), 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION
+ 0: BOOT_MODE_1LM, 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION
+**/
+ UINT8 MemBootMode;
+
+/** Offset 0x0693 - PCIe ASPM programming will happen in relation to the Oprom
+ This option is specifically needed for ASPM configuration in 2LM feature
+ 0:Disabled, 1:L0, 2:L1, 3:L0L1, 4:Auto
+**/
+ UINT8 Peg3Aspm;
+
+/** Offset 0x0694 - MFVC WRR VC Arbitration
+ 0: DEFAULT_PHASES(Default), 1: PROGRAM_128PHASES
+ 0: DEFAULT_PHASES, 1: PROGRAM_128PHASES
+**/
+ UINT8 MfvcWrrArb;
+
+/** Offset 0x0695 - BZM Support
+ 1: enable, 0: disable(Default), Enable/disable setting for Boot-time Zero Memory support
+ $EN_DIS
+**/
+ UINT8 BzmSupport;
+
+/** Offset 0x0696 - VcId_7_0 values
+ Select VC ID for arbitration
+**/
+ UINT8 VcId_7_0[16];
+
+/** Offset 0x06A6 - Set Hw Parameters enable/disable
+ 1: enable, 0: disable, Enable/disable setting of HW parameters
+ $EN_DIS
+**/
+ UINT8 SetHwParameters;
+
+/** Offset 0x06A7
+**/
+ UINT8 UnusedUpdSpace19;
+
+/** Offset 0x06A8 - LTR L1.2 Threshold Value
+ LTR L1.2 Threshold Value
+**/
+ UINT16 Ltr_L1D2_ThVal;
+
+/** Offset 0x06AA - LTR L1.2 Threshold Scale
+ LTR L1.2 Threshold Scale
+**/
+ UINT8 Ltr_L1D2_ThScale;
+
+/** Offset 0x06AB - system power state
+ system power state indicates the platform power state
+**/
+ UINT8 SysPwrState;
+
+/** Offset 0x06AC - Media Death Notification Enable/Disable
+ 1: enable, 0: disable, Enable/disable for Media Death Notification
+ $EN_DIS
+**/
+ UINT8 MediaDeathNotification;
+
+/** Offset 0x06AD - Health Log Notification Enable/Disable
+ 1: enable, 0: disable, Enable/disable for Health Log Notification
+ $EN_DIS
+**/
+ UINT8 HealthLogNotification;
+
+/** Offset 0x06AE - Temp crosses below TempThrottle Notification Enable/Disable
+ 1: enable, 0: disable, Enable/disable for Temp crosses below TempThrottle Notification
+ $EN_DIS
+**/
+ UINT8 TempBelowThrottleNotification;
+
+/** Offset 0x06AF - Temp crosses above TempThrottle Notification Enable/Disable
+ 1: enable, 0: disable, Enable/disable for Temp crosses above TempThrottle Notification
+ $EN_DIS
+**/
+ UINT8 TempAboveThrottleNotification;
+
+/** Offset 0x06B0 - Missing Commit Bit Notification Enable/Disable
+ 1: enable, 0: disable, Enable/disable for Missing Commit Bit Notification
+ $EN_DIS
+**/
+ UINT8 MissingCommitBitNotification;
+
+/** Offset 0x06B1 - NVMeHoldDisableBit
+ 1: enable, 0: disable, Enable/disable for NVMeHoldDisableBit
+ $EN_DIS
**/
- UINT8 Reserved32[32];
+ UINT8 NVMeHoldDisableBit;
/** Offset 0x06B2 - Ddr4OneDpc
DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only,
@@ -2247,9 +2754,42 @@ typedef struct {
**/
UINT8 Ddr4OneDpc;
-/** Offset 0x06B3 - Reserved
+/** Offset 0x06B3 - Ch Hash Override POR settings
+ Enable/Disable Override Channel Hash Support POR values
+ $EN_DIS
+**/
+ UINT8 ChHashOverride;
+
+/** Offset 0x06B4 - PDA Enumeration
+ Enables/Disable PDA Enumeration
+ $EN_DIS
+**/
+ UINT8 PDA;
+
+/** Offset 0x06B5 - DPin Policy
+ Set DPin Policy. Internal Only:All display ports are for internal only. External
+ First:All display ports are for external only, if there is no External DP-In presence
+ presents then IOM will use all ports internal only
+ 0: Internal Only, 1: External First
**/
- UINT8 Reserved33[9];
+ UINT8 DpInExternalEn;
+
+/** Offset 0x06B6 - DPin External Ports Number
+ Total number of External Gfx DpIn Port present on Board. Currently hardware wise
+ max 0x04 DpIn port supported, however DpIn module can handle upto 0x08 DpIn ports
+**/
+ UINT8 NumberOfDpInPort;
+
+/** Offset 0x06B7 - DPin External Port Connect Map
+ Indicate which Dp-In port connection detected. Each BIT stand for one Dp-In port.
+**/
+ UINT8 DpInPortConnectMap;
+
+/** Offset 0x06B8 - Command Pins Mapping
+ BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller
+ 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending.
+**/
+ UINT8 Lp5CccConfig[4];
/** Offset 0x06BC - Command Pins Mirrored
BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller
@@ -2257,9 +2797,28 @@ typedef struct {
**/
UINT32 CmdMirror[1];
-/** Offset 0x06C0 - Reserved
+/** Offset 0x06C0 - CPU BCLK SSC Enable
+ Enable/Disable CPU BCLK Spread Spectrum. Default is Enabled.
+ $EN_DIS
+**/
+ UINT8 CpuBclkSpread;
+
+/** Offset 0x06C1 - McParity
+ CMI/MC Parity Control
+ $EN_DIS
+**/
+ UINT8 McParity;
+
+/** Offset 0x06C2 - Vddq Voltage Override
+ # is multiple of 1mV where 0 means Auto.
**/
- UINT8 Reserved34[5];
+ UINT16 VddqVoltageOverride;
+
+/** Offset 0x06C4 - Extended Bank Hashing
+ Eanble/Disable ExtendedBankHashing
+ $EN_DIS
+**/
+ UINT8 ExtendedBankHashing;
/** Offset 0x06C5 - Skip external display device scanning
Enable: Do not scan for external display device, Disable (Default): Scan external
@@ -2287,9 +2846,13 @@ typedef struct {
**/
UINT8 LockPTMregs;
-/** Offset 0x06C9 - Reserved
+/** Offset 0x06C9 - Rsvd
+ Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1):
+ Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE
+ peak values unmodified
+ $EN_DIS
**/
- UINT8 Reserved35;
+ UINT8 PegGen3Rsvd;
/** Offset 0x06CA - Panel Power Enable
Control for enabling/disabling VDD force bit (Required only for early enabling of
@@ -2304,9 +2867,153 @@ typedef struct {
**/
UINT8 BdatTestType;
-/** Offset 0x06CC - Reserved
+/** Offset 0x06CC - PMR Size
+ Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot
+**/
+ UINT32 DmaBufferSize;
+
+/** Offset 0x06D0 - VT-d/IOMMU Boot Policy
+ BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS
+**/
+ UINT8 PreBootDmaMask;
+
+/** Offset 0x06D1 - Enable/Disable DMI GEN3 Hardware Eq
+ Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0): Disable Hardware Eq, Enabled(0x1)(Default):
+ Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 DmiHweq;
+
+/** Offset 0x06D2 - Enable/Disable CPU DMI GEN3 Phase 23 Bypass
+ CPU DMI GEN3 Phase 23 Bypass. Disabled(0x0)(Default): Disable Phase 23 Bypass, Enabled(0x1):
+ Enable Phase 23 Bypass
+ $EN_DIS
+**/
+ UINT8 Gen3EqPhase23Bypass;
+
+/** Offset 0x06D3 - Enable/Disable CPU DMI GEN3 Phase 3 Bypass
+ CPU DMI GEN3 Phase 3 Bypass. Disabled(0x0)(Default): Disable Phase 3 Bypass, Enabled(0x1):
+ Enable Phase 3 Bypass
+ $EN_DIS
+**/
+ UINT8 Gen3EqPhase3Bypass;
+
+/** Offset 0x06D4 - Enable/Disable CPU DMI Gen3 EQ Local Transmitter Coefficient Override Enable
+ Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0)(Default):
+ Disable Local Transmitter Coefficient Override, Enabled(0x1): Enable Local Transmitter
+ Coefficient Override
+ $EN_DIS
+**/
+ UINT8 Gen3LtcoEnable;
+
+/** Offset 0x06D5 - Enable/Disable CPU DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable
+ Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0): Disable Remote
+ Transmitter Coefficient/Preset Override, Enabled(0x1)(Default): Enable Remote
+ Transmitter Coefficient/Preset Override
+ $EN_DIS
+**/
+ UINT8 Gen3RtcoRtpoEnable;
+
+/** Offset 0x06D6 - DMI Gen3 Transmitter Pre-Cursor Coefficient
+ Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10,
+ 2 is default for each lane
+**/
+ UINT8 DmiGen3Ltcpre[8];
+
+/** Offset 0x06DE - DMI Gen3 Transmitter Post-Cursor Coefficient
+ Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default
+ for each lane
**/
- UINT8 Reserved36[98];
+ UINT8 DmiGen3Ltcpo[8];
+
+/** Offset 0x06E6 - PCIE Hw Eq Gen3 CoeffList Cm
+ CPU_PCIE_EQ_PARAM. Coefficient C-1.
+**/
+ UINT8 CpuDmiHwEqGen3CoeffListCm[8];
+
+/** Offset 0x06EE - PCIE Hw Eq Gen3 CoeffList Cp
+ CPU_PCIE_EQ_PARAM. Coefficient C+1.
+**/
+ UINT8 CpuDmiHwEqGen3CoeffListCp[8];
+
+/** Offset 0x06F6 - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable
+ Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable,
+ Manual(0x1): Enable DmiGen3DsPresetEnable
+ $EN_DIS
+**/
+ UINT8 DmiGen3DsPresetEnable;
+
+/** Offset 0x06F7 - DMI Gen3 Root port preset Rx values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default
+ for each lane
+**/
+ UINT8 DmiGen3DsPortRxPreset[8];
+
+/** Offset 0x06FF - DMI Gen3 Root port preset Tx values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default
+ for each lane
+**/
+ UINT8 DmiGen3DsPortTxPreset[8];
+
+/** Offset 0x0707 - Program DMI GEN3 Extended number of VC
+ (DEPRECATED)
+**/
+ UINT8 DmiGen3MultiVC;
+
+/** Offset 0x0708 - Enable/Disable DMI GEN3 DmiGen3Vc1Control
+ (DEPRECATED)
+ $EN_DIS
+**/
+ UINT8 DmiGen3Vc1Control;
+
+/** Offset 0x0709 - Enable/Disable DMI GEN3 DmiGen3VcMControl
+ (DEPRECATED)
+ $EN_DIS
+**/
+ UINT8 DmiGen3VcMControl;
+
+/** Offset 0x070A - DMI Secure Register Lock:{Combo
+ (DEPRECATED)
+ 0:Disable, 1:Enable
+**/
+ UINT8 DmiSrl;
+
+/** Offset 0x070B - DMI Scramble Enable:{Combo
+ (DEPRECATED)
+ 0:Disable, 1:Enable
+**/
+ UINT8 DmiScramble;
+
+/** Offset 0x070C - DMI Max Payload Size:{Combo
+ (DEPRECATED)
+ 0:Auto, 1:128 TLP, 2:256 TLP
+**/
+ UINT8 DmiMaxPayload;
+
+/** Offset 0x070D - DPin Dynamic Switch Policy
+ Dynamic one-time switch from iGFx to dGFx after boot to OS
+ 0: Disble, 1: Enable
+**/
+ UINT8 DPinDynamicSwitch;
+
+/** Offset 0x070E - Delay before sending commn
+ Delay before sending dynamic one-time switch cmd to IOM, ACPI BIOS consumes this
+ value and proceed delay when _DSM is invoked: 0=Minimal, 5000=Maximum, default
+ is 0 second
+**/
+ UINT16 DPinDynamicSwitchDelay0;
+
+/** Offset 0x0710 - Delay before IOM de-assert HPD
+ Delay before IOM de-assert HPD, ACPI BIOS passes this value to IOM when sending
+ dynamic one-time switch command: 1000=Minimal, 5000=Maximum, default is 1000 = 1 second
+**/
+ UINT16 DPinDynamicSwitchDelay1;
+
+/** Offset 0x0712 - SaPreMemTestRsvd
+ Reserved for SA Pre-Mem Test
+ $EN_DIS
+**/
+ UINT8 SaPreMemTestRsvd[28];
/** Offset 0x072E - TotalFlashSize
Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable
@@ -2320,9 +3027,11 @@ typedef struct {
**/
UINT16 BiosSize;
-/** Offset 0x0732 - Reserved
+/** Offset 0x0732 - SecurityTestRsvd
+ Reserved for SA Pre-Mem Test
+ $EN_DIS
**/
- UINT8 Reserved37[12];
+ UINT8 SecurityTestRsvd[12];
/** Offset 0x073E - Smbus dynamic power gating
Disable or Enable Smbus dynamic power gating.
@@ -2362,18 +3071,26 @@ typedef struct {
**/
UINT8 PchHdaAudioLinkHdaEnable;
-/** Offset 0x0744 - Reserved
+/** Offset 0x0744 - Enable HDA SDI lanes
+ Enable/disable HDA SDI lanes.
**/
- UINT8 Reserved38[3];
+ UINT8 PchHdaSdiEnable[2];
+
+/** Offset 0x0746 - HDA Power/Clock Gating (PGD/CGD)
+ Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1:
+ FORCE_ENABLE, 2: FORCE_DISABLE.
+ 0: POR, 1: Force Enable, 2: Force Disable
+**/
+ UINT8 PchHdaTestPowerClockGating;
/** Offset 0x0747 - Enable HD Audio DMIC_N Link
Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
**/
UINT8 PchHdaAudioLinkDmicEnable[2];
-/** Offset 0x0749 - Reserved
+/** Offset 0x0749
**/
- UINT8 Reserved39[3];
+ UINT8 UnusedUpdSpace20[3];
/** Offset 0x074C - DMIC<N> ClkA Pin Muxing (N - DMIC number)
Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_*
@@ -2391,9 +3108,9 @@ typedef struct {
**/
UINT8 PchHdaDspEnable;
-/** Offset 0x075D - Reserved
+/** Offset 0x075D
**/
- UINT8 Reserved40[3];
+ UINT8 UnusedUpdSpace21[3];
/** Offset 0x0760 - DMIC<N> Data Pin Muxing
Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_*
@@ -2472,9 +3189,20 @@ typedef struct {
**/
UINT8 KtDeviceEnable;
-/** Offset 0x077C - Reserved
+/** Offset 0x077C - Hybrid Graphics GPIO information for PEG 1
+ Hybrid Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs
+**/
+ UINT32 CpuPcie1Rtd3Gpio[24];
+
+/** Offset 0x07DC - Hybrid Graphics GPIO information for PEG 2
+ Hybrid Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs
**/
- UINT8 Reserved41[288];
+ UINT32 CpuPcie2Rtd3Gpio[24];
+
+/** Offset 0x083C - Hybrid Graphics GPIO information for PEG 3
+ Hybrid Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs
+**/
+ UINT32 CpuPcie3Rtd3Gpio[24];
/** Offset 0x089C - Skip CPU replacement check
Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check
@@ -2482,9 +3210,11 @@ typedef struct {
**/
UINT8 SkipCpuReplacementCheck;
-/** Offset 0x089D - Reserved
+/** Offset 0x089D - PCI Express Dekel Workaround
+ Select the 1 to 9 for Dekel registers endpoint programming: 1=Minimal, 9=Maximum,
+ default is 2
**/
- UINT8 Reserved42;
+ UINT8 CpuPcieRpDekelSquelchWa;
/** Offset 0x089E - Serial Io Uart Debug Mode
Select SerialIo Uart Controller mode
@@ -2493,9 +3223,157 @@ typedef struct {
**/
UINT8 SerialIoUartDebugMode;
-/** Offset 0x089F - Reserved
+/** Offset 0x089F
+**/
+ UINT8 UnusedUpdSpace22;
+
+/** Offset 0x08A0 - SerialIoUartDebugRxPinMux - FSPT
+ Select RX pin muxing for SerialIo UART used for debug
+**/
+ UINT32 SerialIoUartDebugRxPinMux;
+
+/** Offset 0x08A4 - SerialIoUartDebugTxPinMux - FSPM
+ Select TX pin muxing for SerialIo UART used for debug
**/
- UINT8 Reserved43[124];
+ UINT32 SerialIoUartDebugTxPinMux;
+
+/** Offset 0x08A8 - SerialIoUartDebugRtsPinMux - FSPM
+ Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
+ for possible values.
+**/
+ UINT32 SerialIoUartDebugRtsPinMux;
+
+/** Offset 0x08AC - SerialIoUartDebugCtsPinMux - FSPM
+ Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS*
+ for possible values.
+**/
+ UINT32 SerialIoUartDebugCtsPinMux;
+
+/** Offset 0x08B0 - Avx2 Voltage Guardband Scaling Factor
+ AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in
+ 1/100 units, where a value of 125 would apply a 1.25 scale factor.
+**/
+ UINT8 Avx2VoltageScaleFactor;
+
+/** Offset 0x08B1 - Avx512 Voltage Guardband Scaling Factor
+ AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200
+ in 1/100 units, where a value of 125 would apply a 1.25 scale factor.
+**/
+ UINT8 Avx512VoltageScaleFactor;
+
+/** Offset 0x08B2 - Lane Used of CSI port
+ Lane Used of each CSI port
+ 1:x1, 2:x2, 3:x3, 4:x4, 8:x8
+**/
+ UINT8 IpuLaneUsed[8];
+
+/** Offset 0x08BA - Lane Used of CSI port
+ Speed of each CSI port
+ 0:Sensor default, 1:<416Mbps, 2:<1.5Gbps, 3:<2Gbps, 4:<2.5Gbps, 5:<4Gbps, 6:>4Gbps
+**/
+ UINT8 CsiSpeed[8];
+
+/** Offset 0x08C2 - DPmem Support
+ 1: enable, 0: disable(Default), Enable/disable setting for Dynamic Persistent Memory support
+ $EN_DIS
+**/
+ UINT8 DpmemSupport;
+
+/** Offset 0x08C3 - Core VF Point Offset Mode
+ Selects Core Voltage & Frequency Point Offset between Legacy and Selection modes;
+ <b>0: Legacy</b>; 1: Selection.
+ 0:Legacy, 1:Selection
+**/
+ UINT8 CoreVfPointOffsetMode;
+
+/** Offset 0x08C4 - Core VF Point Offset
+ Array used to specifies the Offset Voltage applied to the each selected Core VF
+ Point. This voltage is specified in millivolts.
+**/
+ UINT16 CoreVfPointOffset[15];
+
+/** Offset 0x08E2 - Core VF Point Offset Prefix
+ Sets the CoreVfPointOffset value as positive or negative for corresponding core
+ VF Point; <b>0: Positive </b>; 1: Negative.
+ 0:Positive, 1:Negative
+**/
+ UINT8 CoreVfPointOffsetPrefix[15];
+
+/** Offset 0x08F1 - Core VF Point Ratio
+ Array for the each selected Core VF Point to display the ration.
+**/
+ UINT8 CoreVfPointRatio[15];
+
+/** Offset 0x0900 - Core VF Point Count
+ Number of supported Core Voltage & Frequency Point Offset
+**/
+ UINT8 CoreVfPointCount;
+
+/** Offset 0x0901 - Enable CPU CrashLog GPRs dump
+ Enable or Disable CPU CrashLog GPRs dump; <b>0: Disable</b>; 1: Enable; 2: Only
+ disable Smm GPRs dump
+ 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled
+**/
+ UINT8 CrashLogGprs;
+
+/** Offset 0x0902
+**/
+ UINT8 UnusedUpdSpace23[2];
+
+/** Offset 0x0904 - Bitmask of disable cores
+ Core mask is a bitwise indication of which core should be disabled. <b>0x00=Default</b>;
+ Bit 0 - core 0, bit 7 - core 7.
+**/
+ UINT32 DisableCoreMask;
+
+/** Offset 0x0908 - REFRESH_PANIC_WM
+ <b>@deprecated</b> - Not used and has no effect, Please use RefreshWm
+**/
+ UINT8 RefreshPanicWm;
+
+/** Offset 0x0909 - REFRESH_HP_WM
+ <b>@deprecated</b> - Not used and has no effect, Please use RefreshWm
+**/
+ UINT8 RefreshHpWm;
+
+/** Offset 0x090A - Support Unlimited ICCMAX
+ Support Unlimited ICCMAX more than maximum value 255.75A; <b>0: Disabled</b>; 1: Enabled.
+ $EN_DIS
+**/
+ UINT8 UnlimitedIccMax;
+
+/** Offset 0x090B - Per Core Max Ratio override
+ Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new
+ favored core ratio to each Core. <b>0: Disable</b>, 1: enable
+ $EN_DIS
+**/
+ UINT8 PerCoreRatioOverride;
+
+/** Offset 0x090C - Per Core Current Max Ratio
+ Array for the Per Core Max Ratio
+**/
+ UINT8 PerCoreRatio[10];
+
+/** Offset 0x0916 - Margin Limit Check
+ Margin Limit Check. Choose level of margin check
+ 0:Disable, 1:L1, 2:L2, 3:Both
+**/
+ UINT8 MarginLimitCheck;
+
+/** Offset 0x0917
+**/
+ UINT8 UnusedUpdSpace24;
+
+/** Offset 0x0918 - Margin Limit L2
+ % of L1 check for margin limit check
+**/
+ UINT16 MarginLimitL2;
+
+/** Offset 0x091A - Iotg Pll SscEn
+ Enable or disable CPU SSC. 0: Disable, <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 IotgPllSscEn;
/** Offset 0x091B - GPIO Override
Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings
@@ -2504,9 +3382,135 @@ typedef struct {
**/
UINT8 GpioOverride;
-/** Offset 0x091C - Reserved
+/** Offset 0x091C - Write0 enabling
+ Enable/Disable Write0
+ $EN_DIS
+**/
+ UINT8 WRITE0;
+
+/** Offset 0x091D
+**/
+ UINT8 UnusedUpdSpace25[3];
+
+/** Offset 0x0920
+**/
+ UINT32 VccInVoltageOverride;
+
+/** Offset 0x0924 - Dynamic Memory Timings Changes
+ Dynamic Memory Timings Changes; <b>0: Disabled</b>; 1: Enabled.
+ $EN_DIS
+**/
+ UINT8 DynamicMemoryChange;
+
+/** Offset 0x0925 - IbeccErrorInj
+ In-Band ECC Error Injection NOTE: For Debug or Development purposes only! Disable
+ this option for production systems.
+ $EN_DIS
+**/
+ UINT8 IbeccErrorInj;
+
+/** Offset 0x0926 - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable
+ Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable,
+ Manual(0x1): Enable DmiGen3UsPresetEnable
+ $EN_DIS
+**/
+ UINT8 DmiGen3UsPresetEnable;
+
+/** Offset 0x0927 - DMI Gen3 Root port preset Rx values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default
+ for each lane
+**/
+ UINT8 DmiGen3UsPortRxPreset[8];
+
+/** Offset 0x092F - DMI Gen3 Root port preset Tx values per lane
+ Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default
+ for each lane
+**/
+ UINT8 DmiGen3UsPortTxPreset[8];
+
+/** Offset 0x0937 - BCLK Frequency Source
+ Clock source of BCLK OC frequency, <b>0:CPU BCLK</b>, 1:PCH BCLK, 2:External CLK
+ 0:CPU BCLK, 1:PCH BCLK, 2:External CLK
+**/
+ UINT8 BclkSource;
+
+/** Offset 0x0938 - CPU BCLK OC Frequency
+ CPU BCLK OC Frequency in 10KHz units increasing. Value 9800 (10KHz) = 98MHz <b>0
+ - Auto</b>. Range is 8000-50000 (10KHz).
+**/
+ UINT32 CpuBclkOcFrequency;
+
+/** Offset 0x093C - Ring CCF Auto Gv Disable Down
+ Ring CCF Auto Gv Disable Down, 0: Disabled, <b>1:Fused default</b>
+ 0:Disabled, 1:Fused default
+**/
+ UINT8 RingCcfAutoGvDisable;
+
+/** Offset 0x093D - SA/Uncore voltage mode
+ SA/Uncore voltage mode; <b>0: Adaptive</b>; 1: Override.
+ $EN_DIS
+**/
+ UINT8 SaVoltageMode;
+
+/** Offset 0x093E - SA/Uncore Voltage Override
+ The SA/Uncore voltage override applicable when SA/Uncore voltage mode is in Override
+ mode. Valid Range 0 to 2000
+**/
+ UINT16 SaVoltageOverride;
+
+/** Offset 0x0940 - SA/Uncore Extra Turbo voltage
+ Extra Turbo voltage applicable when SA/Uncore voltage mode is in Adaptive mode.
+ Valid Range 0 to 2000
+**/
+ UINT16 SaExtraTurboVoltage;
+
+/** Offset 0x0942 - DdrMemoryDown
+ DDR Memory Down Support.
+ $EN_DIS
+**/
+ UINT8 DdrMemoryDown;
+
+/** Offset 0x0943
+**/
+ UINT8 UnusedUpdSpace26;
+
+/** Offset 0x0944 - The VccIn Max Voltage Limit
+ This will override maximum VCCIN voltage limit to the voltage value specified. <b>0
+ - no override</b> Valid Range 0 to 3000mV
+**/
+ UINT16 VccInMaxLimit;
+
+/** Offset 0x0946 - VccIO Voltage Override
+ This will override VccIO output voltage level to the voltage value specified. Valid
+ Range 0 to 2000
+**/
+ UINT16 VccIoVoltageOverride;
+
+/** Offset 0x0948 - Boost VRef Voltage
+ <b> Default: 0: 0.7V </b> 1: 1.0V to support the high frequencies needed for BCLK OC.
+ 0: 0.7V , 1:1.0V
+**/
+ UINT8 BoostRefVoltage;
+
+/** Offset 0x0949 - Pcie Ref Pll SSC
+ Pcie Ref Pll SSC Percentatge. 0x0: 0.0%, 0x1: 0.1%, 0x2:0.2%, 0x3: 0.3%, 0x4: 0.4%,
+ 0x5: 0.5%, 0xFE: Disable, 0xFF: Auto
+**/
+ UINT8 PcieRefPllSsc;
+
+/** Offset 0x094A - Refresh Watermarks
+ Refresh Watermark, High, Low
+ 1:Enable Refresh Watermark High (Default), 0:Enable Refresh Watermark Low
+**/
+ UINT8 RefreshWm;
+
+/** Offset 0x094B
+**/
+ UINT8 UnusedUpdSpace27[4];
+
+/** Offset 0x094F
**/
- UINT8 Reserved44[52];
+ UINT8 ReservedFspmUpd2[1];
} FSP_M_CONFIG;
/** Fsp M UPD Configuration
diff --git a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
index 9969c73c68..569eaea4e3 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/tigerlake/FspsUpd.h
@@ -123,9 +123,9 @@ typedef struct {
**/
UINT8 ShowSpiController;
-/** Offset 0x0036 - Reserved
+/** Offset 0x0036
**/
- UINT8 Reserved0[2];
+ UINT8 UnusedUpdSpace0[2];
/** Offset 0x0038 - MicrocodeRegionBase
Memory Base of Microcode Updates
@@ -179,9 +179,9 @@ typedef struct {
**/
UINT8 XdciEnable;
-/** Offset 0x006D - Reserved
+/** Offset 0x006D
**/
- UINT8 Reserved1[3];
+ UINT8 UnusedUpdSpace1[3];
/** Offset 0x0070 - Address of PCH_DEVICE_INTERRUPT_CONFIG table.
The address of the table of PCH_DEVICE_INTERRUPT_CONFIG.
@@ -227,9 +227,9 @@ typedef struct {
**/
UINT8 PchHdaVerbTableEntryNum;
-/** Offset 0x0082 - Reserved
+/** Offset 0x0082
**/
- UINT8 Reserved2[2];
+ UINT8 UnusedUpdSpace2[2];
/** Offset 0x0084 - PCH HDA Verb Table Pointer
Pointer to Array of pointers to Verb Table.
@@ -265,9 +265,10 @@ typedef struct {
**/
UINT8 SerialIoSpiCsPolarity[14];
-/** Offset 0x00A0 - Reserved
+/** Offset 0x00A0 - SPI<N> Chip Select Enable
+ 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled
**/
- UINT8 Reserved3[14];
+ UINT8 SerialIoSpiCsEnable[14];
/** Offset 0x00AE - SPIn Default Chip Select Output
Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available
@@ -294,9 +295,9 @@ typedef struct {
**/
UINT8 SerialIoUartMode[7];
-/** Offset 0x00CA - Reserved
+/** Offset 0x00CA
**/
- UINT8 Reserved4[2];
+ UINT8 UnusedUpdSpace3[2];
/** Offset 0x00CC - Default BaudRate for each Serial IO UART
Set default BaudRate Supported from 0 - default to 6000000
@@ -334,9 +335,9 @@ typedef struct {
**/
UINT8 SerialIoUartAutoFlow[7];
-/** Offset 0x0112 - Reserved
+/** Offset 0x0112
**/
- UINT8 Reserved5[2];
+ UINT8 UnusedUpdSpace4[2];
/** Offset 0x0114 - SerialIoUartRtsPinMuxPolicy
Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS*
@@ -401,9 +402,155 @@ typedef struct {
**/
UINT8 PchSerialIoI2cPadsTermination[8];
-/** Offset 0x01DC - Reserved
+/** Offset 0x01DC - ISH GP GPIO Pin Muxing
+ Determines ISH GP GPIO Pin muxing. See GPIO_*_MUXING_ISH_GP_x_GPIO_*. 'x' are GP_NUMBER
**/
- UINT8 Reserved6[184];
+ UINT32 IshGpGpioPinMuxing[8];
+
+/** Offset 0x01FC - ISH UART Rx Pin Muxing
+ Determines ISH UART Rx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_TXD_*
+**/
+ UINT32 IshUartRxPinMuxing[3];
+
+/** Offset 0x0208 - ISH UART Tx Pin Muxing
+ Determines ISH UART Tx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_RXD_*
+**/
+ UINT32 IshUartTxPinMuxing[3];
+
+/** Offset 0x0214 - ISH UART Rts Pin Muxing
+ Select ISH UART Rts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_RTS_* for possible values.
+**/
+ UINT32 IshUartRtsPinMuxing[3];
+
+/** Offset 0x0220 - ISH UART Rts Pin Muxing
+ Select ISH UART Cts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_CTS_* for possible values.
+**/
+ UINT32 IshUartCtsPinMuxing[3];
+
+/** Offset 0x022C - ISH I2C SDA Pin Muxing
+ Select ISH I2C SDA Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SDA_* for possible values.
+**/
+ UINT32 IshI2cSdaPinMuxing[3];
+
+/** Offset 0x0238 - ISH I2C SCL Pin Muxing
+ Select ISH I2C SCL Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SCL_* for possible values.
+**/
+ UINT32 IshI2cSclPinMuxing[3];
+
+/** Offset 0x0244 - ISH SPI MOSI Pin Muxing
+ Select ISH SPI MOSI Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MOSI_* for possible values.
+**/
+ UINT32 IshSpiMosiPinMuxing[2];
+
+/** Offset 0x024C - ISH SPI MISO Pin Muxing
+ Select ISH SPI MISO Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MISO_* for possible values.
+**/
+ UINT32 IshSpiMisoPinMuxing[2];
+
+/** Offset 0x0254 - ISH SPI CLK Pin Muxing
+ Select ISH SPI CLK Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CLK_* for possible values.
+**/
+ UINT32 IshSpiClkPinMuxing[2];
+
+/** Offset 0x025C - ISH SPI CS#N Pin Muxing
+ Select ISH SPI CS#N Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CS<N>_* for possible
+ values. N-SPI number, 0-1.
+**/
+ UINT32 IshSpiCsPinMuxing[4];
+
+/** Offset 0x026C - ISH GP GPIO Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo GP#N GPIO pads termination
+ respectively. #N are GP_NUMBER, not strictly relate to indexes of this table. Index
+ 0-23 -> ISH_GP_0-23, Index 24-25 -> ISH_GP_30-31
+**/
+ UINT8 IshGpGpioPadTermination[8];
+
+/** Offset 0x0274 - ISH UART Rx Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rx pads termination
+ respectively. #N-byte for each controller, byte0 for UART0 Rx, byte1 for UART1
+ Rx, and so on.
+**/
+ UINT8 IshUartRxPadTermination[3];
+
+/** Offset 0x0277 - ISH UART Tx Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Tx pads termination
+ respectively. #N-byte for each controller, byte0 for UART0 Tx, byte1 for UART1
+ Tx, and so on.
+**/
+ UINT8 IshUartTxPadTermination[3];
+
+/** Offset 0x027A - ISH UART Rts Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rts pads termination
+ respectively. #N-byte for each controller, byte0 for UART0 Rts, byte1 for UART1
+ Rts, and so on.
+**/
+ UINT8 IshUartRtsPadTermination[3];
+
+/** Offset 0x027D - ISH UART Rts Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Cts pads termination
+ respectively. #N-byte for each controller, byte0 for UART0 Cts, byte1 for UART1
+ Cts, and so on.
+**/
+ UINT8 IshUartCtsPadTermination[3];
+
+/** Offset 0x0280 - ISH I2C SDA Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Sda pads termination
+ respectively. #N-byte for each controller, byte0 for I2C0 Sda, byte1 for I2C1 Sda,
+ and so on.
+**/
+ UINT8 IshI2cSdaPadTermination[3];
+
+/** Offset 0x0283 - ISH I2C SCL Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Scl pads termination
+ respectively. #N-byte for each controller, byte0 for I2C0 Scl, byte1 for I2C1 Scl,
+ and so on.
+**/
+ UINT8 IshI2cSclPadTermination[3];
+
+/** Offset 0x0286 - ISH SPI MOSI Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Mosi pads termination
+ respectively. #N-byte for each controller, byte0 for SPI0 Mosi, byte1 for SPI1
+ Mosi, and so on.
+**/
+ UINT8 IshSpiMosiPadTermination[2];
+
+/** Offset 0x0288 - ISH SPI MISO Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Miso pads termination
+ respectively. #N-byte for each controller, byte0 for SPI0 Miso, byte1 for SPI1
+ Miso, and so on.
+**/
+ UINT8 IshSpiMisoPadTermination[2];
+
+/** Offset 0x028A - ISH SPI CLK Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Clk pads termination
+ respectively. #N-byte for each controller, byte0 for SPI0 Clk, byte1 for SPI1 Clk,
+ and so on.
+**/
+ UINT8 IshSpiClkPadTermination[2];
+
+/** Offset 0x028C - ISH SPI CS#N Pad termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Cs#M pads termination
+ respectively. N*M-byte for each controller, byte0 for SPI0 Cs0, byte1 for SPI1
+ Cs1, SPI1 Cs0, byte2, SPI1 Cs1, byte3
+**/
+ UINT8 IshSpiCsPadTermination[4];
+
+/** Offset 0x0290 - Enable PCH ISH SPI Cs#N pins assigned
+ Set if ISH SPI Cs#N pins are to be enabled by BIOS. 0: Disable; 1: Enable. N-Cs
+ number: 0-1
+**/
+ UINT8 PchIshSpiCsEnable[4];
/** Offset 0x0294 - USB Per Port HS Preemphasis Bias
USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
@@ -491,18 +638,46 @@ typedef struct {
**/
UINT8 PchLanEnable;
-/** Offset 0x034D - Reserved
+/** Offset 0x034D - Enable PCH TSN
+ Enable/disable TSN on the PCH.
+ $EN_DIS
+**/
+ UINT8 PchTsnEnable;
+
+/** Offset 0x034E - TSN Link Speed
+ Set TSN Link Speed.
+ 0: 24Mhz 2.5Gbps, 1: 24Mhz 1Gbps, 2: 38.4Mhz 2.5Gbps, 3: 38.4Mhz 1Gbps
**/
- UINT8 Reserved7[11];
+ UINT8 PchTsnLinkSpeed;
+
+/** Offset 0x034F
+**/
+ UINT8 UnusedUpdSpace5;
+
+/** Offset 0x0350 - PCH TSN0 MAC Address High Bits
+ Set TSN0 MAC Address High.
+**/
+ UINT32 PchTsn0MacAddressHigh;
+
+/** Offset 0x0354 - PCH TSN0 MAC Address Low Bits
+ Set TSN0 MAC Address Low.
+**/
+ UINT32 PchTsn0MacAddressLow;
/** Offset 0x0358 - PCIe PTM enable/disable
Enable/disable Precision Time Measurement for PCIE Root Ports.
**/
UINT8 PciePtm[24];
-/** Offset 0x0370 - Reserved
+/** Offset 0x0370 - PCIe DPC enable/disable
+ Enable/disable Downstream Port Containment for PCIE Root Ports.
**/
- UINT8 Reserved8[48];
+ UINT8 PcieDpc[24];
+
+/** Offset 0x0388 - PCIe DPC extensions enable/disable
+ Enable/disable Downstream Port Containment Extensions for PCIE Root Ports.
+**/
+ UINT8 PcieEdpc[24];
/** Offset 0x03A0 - USB PDO Programming
Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming
@@ -511,9 +686,9 @@ typedef struct {
**/
UINT8 UsbPdoProgramming;
-/** Offset 0x03A1 - Reserved
+/** Offset 0x03A1
**/
- UINT8 Reserved9[3];
+ UINT8 UnusedUpdSpace6[3];
/** Offset 0x03A4 - Power button debounce configuration
Debounce time for PWRBTN in microseconds. For values not supported by HW, they will
@@ -563,9 +738,9 @@ typedef struct {
**/
UINT8 PchFivrExtVnnRailSupportedVoltageStates;
-/** Offset 0x03B1 - Reserved
+/** Offset 0x03B1
**/
- UINT8 Reserved10;
+ UINT8 UnusedUpdSpace7;
/** Offset 0x03B2 - External Vnn Voltage Value that will be used in S0ix/Sx states
Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...), Default is set to 420
@@ -618,9 +793,9 @@ typedef struct {
**/
UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime;
-/** Offset 0x03BE - Reserved
+/** Offset 0x03BE
**/
- UINT8 Reserved11[2];
+ UINT8 UnusedUpdSpace8[2];
/** Offset 0x03C0 - Trace Hub Memory Base
If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate
@@ -636,9 +811,9 @@ typedef struct {
**/
UINT8 PmcDbgMsgEn;
-/** Offset 0x03C5 - Reserved
+/** Offset 0x03C5
**/
- UINT8 Reserved12[3];
+ UINT8 UnusedUpdSpace9[3];
/** Offset 0x03C8 - Pointer of ChipsetInit Binary
ChipsetInit Binary Pointer.
@@ -656,18 +831,61 @@ typedef struct {
**/
UINT8 PchFivrDynPm;
-/** Offset 0x03D1 - Reserved
+/** Offset 0x03D1
**/
- UINT8 Reserved13;
+ UINT8 UnusedUpdSpace10;
/** Offset 0x03D2 - External V1P05 Icc Max Value
Granularity of this setting is 1mA and maximal possible value is 500mA
**/
UINT16 PchFivrExtV1p05RailIccMaximum;
-/** Offset 0x03D4 - Reserved
+/** Offset 0x03D4 - External Vnn Icc Max Value that will be used in S0ix/Sx states
+ Granularity of this setting is 1mA and maximal possible value is 500mA
+**/
+ UINT16 PchFivrExtVnnRailIccMaximum;
+
+/** Offset 0x03D6 - External Vnn Icc Max Value that will be used in Sx states
+ Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting
+ is 1mA and maximal possible value is 500mA
+**/
+ UINT16 PchFivrExtVnnRailSxIccMaximum;
+
+/** Offset 0x03D8 - PCH eSPI Link Configuration Lock (SBLCL)
+ Enable/Disable lock of communication through SET_CONFIG/GET_CONFIG to eSPI slaves
+ addresseses from range 0x0 - 0x7FF
+ $EN_DIS
+**/
+ UINT8 PchEspiLockLinkConfiguration;
+
+/** Offset 0x03D9 - Extented BIOS Direct Read Decode enable
+ Enable/Disable access to bigger than 16MB BIOS Region through Direct Memory Reads.
+ 0: disabled (default), 1: enabled
+ $EN_DIS
+**/
+ UINT8 PchSpiExtendedBiosDecodeRangeEnable;
+
+/** Offset 0x03DA - Enforce Enhanced Debug Mode
+ Determine if ME should enter Enhanced Debug Mode. <b>0: disable</b>, 1: enable
+ $EN_DIS
+**/
+ UINT8 EnforceEDebugMode;
+
+/** Offset 0x03DB - PchPostMemRsvd
+ Reserved for PCH Post-Mem
+ $EN_DIS
+**/
+ UINT8 PchPostMemRsvd[1];
+
+/** Offset 0x03DC - Extended BIOS Direct Read Decode Range base
+ Bits of 31:16 of a memory address that'll be a base for Extended BIOS Direct Read Decode.
+**/
+ UINT32 PchSpiExtendedBiosDecodeRangeBase;
+
+/** Offset 0x03E0 - Extended BIOS Direct Read Decode Range limit
+ Bits of 31:16 of a memory address that'll be a limit for Extended BIOS Direct Read Decode.
**/
- UINT8 Reserved14[16];
+ UINT32 PchSpiExtendedBiosDecodeRangeLimit;
/** Offset 0x03E4 - CNVi Configuration
This option allows for automatic detection of Connectivity Solution. [Auto Detection]
@@ -688,9 +906,9 @@ typedef struct {
**/
UINT8 CnviBtAudioOffload;
-/** Offset 0x03E7 - Reserved
+/** Offset 0x03E7
**/
- UINT8 Reserved15;
+ UINT8 UnusedUpdSpace11;
/** Offset 0x03E8 - CNVi RF_RESET pin muxing
Select CNVi RF_RESET# pin depending on board routing. TGP-LP: GPP_A8 = 0x2942E408(default)
@@ -731,9 +949,15 @@ typedef struct {
**/
UINT8 PchEspiLgmrEnable;
-/** Offset 0x03F4 - Reserved
+/** Offset 0x03F4 - External V1P05 Control Ramp Timer value
+ Hold off time to be used when changing the v1p05_ctrl for external bypass value in us
**/
- UINT8 Reserved16[2];
+ UINT8 PchFivrExtV1p05RailCtrlRampTmr;
+
+/** Offset 0x03F5 - External VNN Control Ramp Timer value
+ Hold off time to be used when changing the vnn_ctrl for external bypass value in us
+**/
+ UINT8 PchFivrExtVnnRailCtrlRampTmr;
/** Offset 0x03F6 - Set SATA DEVSLP GPIO Reset Config
Set SATA DEVSLP GPIO Reset Config per port. 0x00 - GpioResetDefault, 0x01 - GpioResumeReset,
@@ -801,9 +1025,9 @@ typedef struct {
**/
UINT8 AmtSolEnabled;
-/** Offset 0x0407 - Reserved
+/** Offset 0x0407
**/
- UINT8 Reserved17;
+ UINT8 UnusedUpdSpace12;
/** Offset 0x0408 - OS Timer
16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0.
@@ -850,9 +1074,9 @@ typedef struct {
**/
UINT8 PcieRpEnableCpm[24];
-/** Offset 0x0457 - Reserved
+/** Offset 0x0457
**/
- UINT8 Reserved18;
+ UINT8 UnusedUpdSpace13[1];
/** Offset 0x0458 - PCIE RP Detect Timeout Ms
The number of milliseconds within 0~65535 in reference code will wait for link to
@@ -868,9 +1092,19 @@ typedef struct {
**/
UINT8 PmcModPhySusPgEnable;
-/** Offset 0x0489 - Reserved
+/** Offset 0x0489 - V1p05-PHY supply external FET control
+ Enable/Disable control using EXT_PWR_GATE# pin of external FET to power gate v1p05-PHY
+ supply. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcV1p05PhyExtFetControlEn;
+
+/** Offset 0x048A - V1p05-IS supply external FET control
+ Enable/Disable control using EXT_PWR_GATE2# pin of external FET to power gate v1p05-IS
+ supply. 0: disable, 1: enable
+ $EN_DIS
**/
- UINT8 Reserved19[2];
+ UINT8 PmcV1p05IsExtFetControlEn;
/** Offset 0x048B - Enable/Disable PavpEnable
Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable
@@ -929,9 +1163,16 @@ typedef struct {
**/
UINT8 ITbtPcieTunnelingForUsb4;
-/** Offset 0x04BA - Reserved
+/** Offset 0x04BA - Enable/Disable SkipFspGop
+ Enable: Skip FSP provided GOP driver, Disable(Default): Use FSP provided GOP driver
+ $EN_DIS
+**/
+ UINT8 SkipFspGop;
+
+/** Offset 0x04BB - TC State in TCSS
+ This TC C-State Limit in IOM
**/
- UINT8 Reserved20[2];
+ UINT8 TcCstateLimit;
/** Offset 0x04BC - Disable TC code On USB Connect
Enable: Unsupported TC cold capability on Usb Connected, Disable(default): Supported
@@ -940,9 +1181,21 @@ typedef struct {
**/
UINT8 DisableTccoldOnUsbConnected;
-/** Offset 0x04BD - Reserved
+/** Offset 0x04BD - Set Iom stay in TC cold seconds in TCSS
+ Set Iom stay in TC cold seconds in IOM
+**/
+ UINT8 IomStayInTCColdeSeconds;
+
+/** Offset 0x04BE - Set Iom before entering TC cold seconds in TCSS
+ Set Iom before entering TC cold seconds in IOM
+**/
+ UINT8 IomBeforeEnteringTCCodeSeconds;
+
+/** Offset 0x04BF - SaPostMemRsvd
+ Reserved for PCH Post-Mem
+ $EN_DIS
**/
- UINT8 Reserved21[4];
+ UINT8 SaPostMemRsvd[2];
/** Offset 0x04C1 - Enable VMD controller
Enable/disable to VMD controller.0: Disable(Default); 1: Enable
@@ -974,9 +1227,10 @@ typedef struct {
**/
UINT8 VmdPortD;
-/** Offset 0x04C6 - Reserved
+/** Offset 0x04C6 - VMD Config Bar size
+ Set The VMD Config Bar Size.
**/
- UINT8 Reserved22;
+ UINT8 VmdCfgBarSize;
/** Offset 0x04C7 - VMD Config Bar Attributes
0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH(Default)
@@ -984,9 +1238,10 @@ typedef struct {
**/
UINT8 VmdCfgBarAttr;
-/** Offset 0x04C8 - Reserved
+/** Offset 0x04C8 - VMD Mem Bar1 size
+ Set The VMD Mem Bar1 Size.
**/
- UINT8 Reserved23;
+ UINT8 VmdMemBarSize1;
/** Offset 0x04C9 - VMD Mem Bar1 Attributes
0: VMD_32BIT_NONPREFETCH(Default), 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH
@@ -994,9 +1249,10 @@ typedef struct {
**/
UINT8 VmdMemBar1Attr;
-/** Offset 0x04CA - Reserved
+/** Offset 0x04CA - VMD Mem Bar2 size
+ Set The VMD Mem Bar2 Size.
**/
- UINT8 Reserved24;
+ UINT8 VmdMemBarSize2;
/** Offset 0x04CB - VMD Mem Bar2 Attributes
0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH
@@ -1010,9 +1266,9 @@ typedef struct {
**/
UINT8 PmcPdEnable;
-/** Offset 0x04CD - Reserved
+/** Offset 0x04CD
**/
- UINT8 Reserved25;
+ UINT8 UnusedUpdSpace14;
/** Offset 0x04CE - TCSS Aux Orientation Override Enable
Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides
@@ -1097,9 +1353,9 @@ typedef struct {
**/
UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4];
-/** Offset 0x04F3 - Reserved
+/** Offset 0x04F3
**/
- UINT8 Reserved26;
+ UINT8 UnusedUpdSpace15[1];
/** Offset 0x04F4 - PCIE RP Snoop Latency Override Value
Latency Tolerance Reporting, Snoop Latency Override Value.
@@ -1149,9 +1405,9 @@ typedef struct {
**/
UINT8 Psi4Enable[5];
-/** Offset 0x051F - Reserved
+/** Offset 0x051F
**/
- UINT8 Reserved27;
+ UINT8 UnusedUpdSpace16[1];
/** Offset 0x0520 - Imon slope correction
PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
@@ -1225,9 +1481,11 @@ typedef struct {
**/
UINT8 EnableMultiPhaseSiliconInit;
-/** Offset 0x0556 - Reserved
+/** Offset 0x0556 - Thermal Design Current current limit
+ PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units.
+ Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes
**/
- UINT8 Reserved28[10];
+ UINT16 TdcCurrentLimit[5];
/** Offset 0x0560 - AcLoadline
PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
@@ -1275,8 +1533,9 @@ typedef struct {
UINT8 SendVrMbxCmd;
/** Offset 0x05A7 - Reserved
+ Reserved
**/
- UINT8 Reserved29;
+ UINT8 Reserved2;
/** Offset 0x05A8 - Enable or Disable TXT
Enable or Disable TXT; 0: Disable; <b>1: Enable</b>.
@@ -1305,9 +1564,9 @@ typedef struct {
**/
UINT8 FivrSpreadSpectrum;
-/** Offset 0x05AD - Reserved
+/** Offset 0x05AD
**/
- UINT8 Reserved30[3];
+ UINT8 UnusedUpdSpace17[3];
/** Offset 0x05B0 - CpuBistData
Pointer CPU BIST Data
@@ -1326,9 +1585,42 @@ typedef struct {
**/
UINT32 CpuMpHob;
-/** Offset 0x05BC - Reserved
+/** Offset 0x05BC - RFI Mitigation
+ Enable or Disable RFI Mitigation. <b>0: Disable - DCM is the IO_N default</b>; 1:
+ Enable - Enable IO_N DCM/CCM switching as RFI mitigation.
+ $EN_DIS
+**/
+ UINT8 RfiMitigation;
+
+/** Offset 0x05BD - FIVR RFI Spread Spectrum Enable or disable
+ Enable or Disable FIVR RFI Spread Spectrum. 0: Disable ; <b> 1: Enable </b>
+**/
+ UINT8 FivrSpectrumEnable;
+
+/** Offset 0x05BE - Pre Wake Randomization time
+ PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum pre-wake
+ randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation
+ is enabled. Range 0-255 <b>0</b>.
+**/
+ UINT8 PreWake;
+
+/** Offset 0x05BF - Ramp Up Randomization time
+ PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Up
+ randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation
+ is enabled.Range 0-255 <b>0</b>.
+**/
+ UINT8 RampUp;
+
+/** Offset 0x05C0 - Ramp Down Randomization time
+ PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Down
+ randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation
+ is enabled.Range 0-255 <b>0</b>.
+**/
+ UINT8 RampDown;
+
+/** Offset 0x05C1
**/
- UINT8 Reserved31[16];
+ UINT8 CpuPostMemRsvd[11];
/** Offset 0x05CC - PpinSupport to view Protected Processor Inventory Number
Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this
@@ -1367,9 +1659,35 @@ typedef struct {
**/
UINT16 MinVoltageC8;
-/** Offset 0x05DE - Reserved
+/** Offset 0x05DE - Platform Psys offset correction
+ PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/1000,
+ Range 0-63999. For an offset of 25.348, enter 25348.
**/
- UINT8 Reserved32[10];
+ UINT16 PsysOffset1;
+
+/** Offset 0x05E0 - Smbios Type4 Max Speed Override
+ Provide the option for platform to override the MaxSpeed field of Smbios Type 4.
+ If this value is not zero, it dominates the field.
+**/
+ UINT16 SmbiosType4MaxSpeedOverride;
+
+/** Offset 0x05E2 - AvxDisable
+ Enable or Disable AVX Support.
+ 0: Enable, 1: Disable
+**/
+ UINT8 AvxDisable;
+
+/** Offset 0x05E3 - Avx3Disable
+ Enable or Disable AVX3 Support
+ 0: Enable, 1: Disable
+**/
+ UINT8 Avx3Disable;
+
+/** Offset 0x05E4 - ReservedCpuPostMemProduction
+ Reserved for CPU Post-Mem Production
+ $EN_DIS
+**/
+ UINT8 ReservedCpuPostMemProduction[4];
/** Offset 0x05E8 - Enable Power Optimizer
Enable DMI Power Optimizer on PCH side.
@@ -1387,9 +1705,9 @@ typedef struct {
**/
UINT8 PchReadProtectionEnable[5];
-/** Offset 0x05F3 - Reserved
+/** Offset 0x05F3
**/
- UINT8 Reserved33;
+ UINT8 UnusedUpdSpace18[1];
/** Offset 0x05F4 - PCH Protect Range Limit
Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for
@@ -1414,9 +1732,11 @@ typedef struct {
**/
UINT8 PchHdaLinkFrequency;
-/** Offset 0x060A - Reserved
+/** Offset 0x060A - PchPostMemRsvd
+ Reserved for PCH Post-Mem
+ $EN_DIS
**/
- UINT8 Reserved34[3];
+ UINT8 PchPostMemRsvd4[3];
/** Offset 0x060D - Enable PCH ISH SPI Cs0 pins assigned
Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable.
@@ -1479,9 +1799,11 @@ typedef struct {
**/
UINT8 PchCrid;
-/** Offset 0x0622 - Reserved
+/** Offset 0x0622 - RTC BIOS Interface Lock
+ Enable RTC BIOS interface lock. When set, prevents RTC TS (BUC.TS) from being changed.
+ $EN_DIS
**/
- UINT8 Reserved35;
+ UINT8 RtcBiosInterfaceLock;
/** Offset 0x0623 - RTC Cmos Memory Lock
Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
@@ -1561,9 +1883,15 @@ typedef struct {
**/
UINT8 ThcPort0Assignment;
-/** Offset 0x075D - Reserved
+/** Offset 0x075D
+**/
+ UINT8 UnusedUpdSpace19[3];
+
+/** Offset 0x0760 - THC Port 0 Interrupt Pin Mux
+ Set THC Port 0 Pin Muxing Value if signal can be enabled on multiple pads. Refer
+ to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values.
**/
- UINT8 Reserved36[7];
+ UINT32 ThcPort0InterruptPinMuxing;
/** Offset 0x0764 - Touch Host Controller Port 1 Assignment
Assign THC Port 1
@@ -1571,9 +1899,27 @@ typedef struct {
**/
UINT8 ThcPort1Assignment;
-/** Offset 0x0765 - Reserved
+/** Offset 0x0765 - Touch Host Controller Port 1 ReadFrequency
+ Set THC Port 1 Read Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
+ 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
**/
- UINT8 Reserved37[7];
+ UINT8 ThcPort1ReadFrequency;
+
+/** Offset 0x0766 - Touch Host Controller Port 1 WriteFrequency
+ Set THC Port 1 Write Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
+ 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz
+**/
+ UINT8 ThcPort1WriteFrequency;
+
+/** Offset 0x0767
+**/
+ UINT8 UnusedUpdSpace20;
+
+/** Offset 0x0768 - THC Port 1 Interrupt Pin Mux
+ Set THC Port 1 Pin Muxing Value if signal can be enabled on multiple pads. Refer
+ to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values.
+**/
+ UINT32 ThcPort1InterruptPinMuxing;
/** Offset 0x076C - PCIE RP Pcie Speed
Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see:
@@ -1613,9 +1959,66 @@ typedef struct {
**/
UINT8 PcieRpLtrConfigLock[24];
-/** Offset 0x0814 - Reserved
+/** Offset 0x0814 - PCIe override default settings for EQ
+ Choose PCIe EQ method
+ $EN_DIS
**/
- UINT8 Reserved38[45];
+ UINT8 PcieEqOverrideDefault;
+
+/** Offset 0x0815 - PCIe choose EQ method
+ Choose PCIe EQ method
+ 0: HardwareEq, 1: FixedEq
+**/
+ UINT8 PcieEqMethod;
+
+/** Offset 0x0816 - PCIe choose EQ mode
+ Choose PCIe EQ mode
+ 0: PresetEq, 1: CoefficientEq
+**/
+ UINT8 PcieEqMode;
+
+/** Offset 0x0817 - PCIe EQ local transmitter override
+ Enable/Disable local transmitter override
+ $EN_DIS
+**/
+ UINT8 PcieEqLocalTransmitterOverrideEnable;
+
+/** Offset 0x0818 - PCIe number of valid list entries
+ Select number of presets or coefficients depending on the mode
+**/
+ UINT8 PcieEqPh3NumberOfPresetsOrCoefficients;
+
+/** Offset 0x0819 - PCIe pre-cursor coefficient list
+ Provide a list of pre-cursor coefficients to be used during phase 3 EQ
+**/
+ UINT8 PcieEqPh3PreCursorList[10];
+
+/** Offset 0x0823 - PCIe post-cursor coefficient list
+ Provide a list of post-cursor coefficients to be used during phase 3 EQ
+**/
+ UINT8 PcieEqPh3PostCursorList[10];
+
+/** Offset 0x082D - PCIe preset list
+ Provide a list of presets to be used during phase 3 EQ
+**/
+ UINT8 PcieEqPh3PresetList[11];
+
+/** Offset 0x0838 - PCIe EQ phase 1 downstream transmitter port preset
+ Allows to select the downstream port preset value that will be used during phase
+ 1 of equalization
+**/
+ UINT32 PcieEqPh1DownstreamPortTransmitterPreset;
+
+/** Offset 0x083C - PCIe EQ phase 1 upstream tranmitter port preset
+ Allows to select the upstream port preset value that will be used during phase 1
+ of equalization
+**/
+ UINT32 PcieEqPh1UpstreamPortTransmitterPreset;
+
+/** Offset 0x0840 - PCIe EQ phase 2 local transmitter override preset
+ Allows to select the value of the preset used during phase 2 local transmitter override
+**/
+ UINT8 PcieEqPh2LocalTransmitterOverridePreset;
/** Offset 0x0841 - PCIE Enable Peer Memory Write
This member describes whether Peer Memory Writes are enabled on the platform.
@@ -1636,9 +2039,19 @@ typedef struct {
**/
UINT8 PcieRpFunctionSwap;
-/** Offset 0x0844 - Reserved
+/** Offset 0x0844 - Enable/Disable PEG GEN3 Static EQ Phase1 programming
+ Program Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets
+ Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
+**/
+ UINT8 CpuPcieGen3ProgramStaticEq;
+
+/** Offset 0x0845 - Enable/Disable GEN4 Static EQ Phase1 programming
+ Program Gen4 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets
+ Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming
+ $EN_DIS
**/
- UINT8 Reserved39[2];
+ UINT8 CpuPcieGen4ProgramStaticEq;
/** Offset 0x0846 - PCH Pm PME_B0_S5_DIS
When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1.
@@ -1832,9 +2245,9 @@ typedef struct {
**/
UINT8 SataPortsDmVal[8];
-/** Offset 0x0899 - Reserved
+/** Offset 0x0899
**/
- UINT8 Reserved40;
+ UINT8 UnusedUpdSpace21[1];
/** Offset 0x089A - Enable SATA Port DmVal
DEVSLP Idle Timeout (DITO), Default is 625.
@@ -1939,9 +2352,11 @@ typedef struct {
**/
UINT8 UfsEnable[2];
-/** Offset 0x08C9 - Reserved
+/** Offset 0x08C9 - IEH Mode
+ Integrated Error Handler Mode, 0: Bypass, 1: Enable
+ 0: Bypass, 1:Enable
**/
- UINT8 Reserved41;
+ UINT8 IehMode;
/** Offset 0x08CA - Thermal Throttling Custimized T0Level Value
Custimized T0Level value.
@@ -2114,9 +2529,9 @@ typedef struct {
**/
UINT8 PchMemoryPinSelection[2];
-/** Offset 0x08EF - Reserved
+/** Offset 0x08EF
**/
- UINT8 Reserved42;
+ UINT8 UnusedUpdSpace22;
/** Offset 0x08F0 - Thermal Device Temperature
Decides the temperature.
@@ -2139,9 +2554,9 @@ typedef struct {
**/
UINT8 PchUsbLtrOverrideEnable;
-/** Offset 0x090D - Reserved
+/** Offset 0x090D
**/
- UINT8 Reserved43[3];
+ UINT8 UnusedUpdSpace23[3];
/** Offset 0x0910 - xHCI High Idle Time LTR override
Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting
@@ -2201,9 +2616,9 @@ typedef struct {
**/
UINT8 HybridStorageMode;
-/** Offset 0x0922 - Reserved
+/** Offset 0x0922
**/
- UINT8 Reserved44[6];
+ UINT8 UnusedUpdSpace24[6];
/** Offset 0x0928 - BgpdtHash[4]
BgpdtHash values
@@ -2215,9 +2630,9 @@ typedef struct {
**/
UINT32 BiosGuardAttr;
-/** Offset 0x094C - Reserved
+/** Offset 0x094C
**/
- UINT8 Reserved45[4];
+ UINT8 UnusedUpdSpace25[4];
/** Offset 0x0950 - BiosGuardModulePtr
BiosGuardModulePtr default values
@@ -2241,9 +2656,9 @@ typedef struct {
**/
UINT8 EcCmdLock;
-/** Offset 0x0962 - Reserved
+/** Offset 0x0962
**/
- UINT8 Reserved46[6];
+ UINT8 UnusedUpdSpace26[6];
/** Offset 0x0968 - SgxEpoch0
SgxEpoch0 default values
@@ -2267,9 +2682,28 @@ typedef struct {
**/
UINT8 SiCsmFlag;
-/** Offset 0x097A - Reserved
+/** Offset 0x097A - Skip Ssid Programming.
+ When set to TRUE, silicon code will not do any SSID programming and platform code
+ needs to handle that by itself properly.
+ $EN_DIS
+**/
+ UINT8 SiSkipSsidProgramming;
+
+/** Offset 0x097B
**/
- UINT8 Reserved47[6];
+ UINT8 UnusedUpdSpace27;
+
+/** Offset 0x097C - Change Default SVID
+ Change the default SVID used in FSP to programming internal devices. This is only
+ valid when SkipSsidProgramming is FALSE.
+**/
+ UINT16 SiCustomizedSvid;
+
+/** Offset 0x097E - Change Default SSID
+ Change the default SSID used in FSP to programming internal devices. This is only
+ valid when SkipSsidProgramming is FALSE.
+**/
+ UINT16 SiCustomizedSsid;
/** Offset 0x0980 - SVID SDID table Poniter.
The address of the table of SVID SDID to customize each SVID SDID entry. This is
@@ -2335,17 +2769,296 @@ typedef struct {
**/
UINT8 PmcOsIdleEnable;
-/** Offset 0x099D - Reserved
+/** Offset 0x099D - S0ix Auto-Demotion
+ Enable/Disable the Low Power Mode Auto-Demotion Host Control feature.
+ $EN_DIS
+**/
+ UINT8 PchS0ixAutoDemotion;
+
+/** Offset 0x099E - Latch Events C10 Exit
+ When this bit is set to 1, SLP_S0# entry events in SLP_S0_DEBUG_REGx registers are
+ captured on C10 exit (instead of C10 entry which is default)
+ $EN_DIS
+**/
+ UINT8 PchPmLatchEventsC10Exit;
+
+/** Offset 0x099F - PCIE Eq Ph3 Lane Param Cm
+ CPU_PCIE_EQ_LANE_PARAM. Coefficient C-1.
+**/
+ UINT8 CpuPcieEqPh3LaneParamCm[32];
+
+/** Offset 0x09BF - PCIE Eq Ph3 Lane Param Cp
+ CPU_PCIE_EQ_LANE_PARAM. Coefficient C+1.
+**/
+ UINT8 CpuPcieEqPh3LaneParamCp[32];
+
+/** Offset 0x09DF - PCIE Hw Eq Gen3 CoeffList Cm
+ CPU_PCIE_EQ_PARAM. Coefficient C-1.
+**/
+ UINT8 CpuPcieHwEqGen3CoeffListCm[5];
+
+/** Offset 0x09E4 - PCIE Hw Eq Gen3 CoeffList Cp
+ CPU_PCIE_EQ_PARAM. Coefficient C+1.
+**/
+ UINT8 CpuPcieHwEqGen3CoeffListCp[5];
+
+/** Offset 0x09E9 - PCIE Hw Eq Gen4 CoeffList Cm
+ CPU_PCIE_EQ_PARAM. Coefficient C-1.
+**/
+ UINT8 CpuPcieHwEqGen4CoeffListCm[5];
+
+/** Offset 0x09EE - PCIE Hw Eq Gen4 CoeffList Cp
+ CPU_PCIE_EQ_PARAM. Coefficient C+1.
+**/
+ UINT8 CpuPcieHwEqGen4CoeffListCp[5];
+
+/** Offset 0x09F3 - Gen3 Root port preset values per lane
+ Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 8 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen3RootPortPreset[20];
+
+/** Offset 0x0A07 - Pcie Gen4 Root port preset values per lane
+ Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 8 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen4RootPortPreset[20];
+
+/** Offset 0x0A1B - Pcie Gen3 End port preset values per lane
+ Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 7 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen3EndPointPreset[20];
+
+/** Offset 0x0A2F - Pcie Gen4 End port preset values per lane
+ Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 7 is default
+ for each lane
+**/
+ UINT8 CpuPcieGen4EndPointPreset[20];
+
+/** Offset 0x0A43 - Pcie Gen3 End port Hint values per lane
+ Used for programming Pcie Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 CpuPcieGen3EndPointHint[20];
+
+/** Offset 0x0A57 - Pcie Gen4 End port Hint values per lane
+ Used for programming Pcie Gen4 Hint values per lane. Range: 0-6, 2 is default for each lane
+**/
+ UINT8 CpuPcieGen4EndPointHint[20];
+
+/** Offset 0x0A6B - CPU PCIe Fia Programming
+ Load Fia configuration if enable. 0: Disable; 1: Enable(Default).
+ $EN_DIS
+**/
+ UINT8 CpuPcieFiaProgramming;
+
+/** Offset 0x0A6C - CPU PCIe RootPort Clock Gating
+ Describes whether the PCI Express Clock Gating for each root port is enabled by
+ platform modules. 0: Disable; 1: Enable(Default).
+ $EN_DIS
+**/
+ UINT8 CpuPcieClockGating;
+
+/** Offset 0x0A6D - CPU PCIe RootPort Power Gating
+ Describes whether the PCI Express Power Gating for each root port is enabled by
+ platform modules. 0: Disable; 1: Enable(Default).
+ $EN_DIS
+**/
+ UINT8 CpuPciePowerGating;
+
+/** Offset 0x0A6E - PCIE Compliance Test Mode
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ $EN_DIS
+**/
+ UINT8 CpuPcieComplianceTestMode;
+
+/** Offset 0x0A6F - PCIE Secure Register Lock
+ Describes whether Secure Register Lock is enaled or disabled. When it will be enbaled,
+ load CpuPcieRpSetSecuredRegisterLock recipe. DEPRECATED 0: Disable(Default); 1: Enable
+ $EN_DIS
+**/
+ UINT8 CpuPcieSetSecuredRegisterLock;
+
+/** Offset 0x0A70 - PCIE Enable Peer Memory Write
+ This member describes whether Peer Memory Writes are enabled on the platform.
+ $EN_DIS
+**/
+ UINT8 CpuPcieEnablePeerMemoryWrite;
+
+/** Offset 0x0A71 - PCIE Rp Function Swap
+ Allows BIOS to use root port function number swapping when root port of function
+ 0 is disabled.
+ $EN_DIS
+**/
+ UINT8 CpuPcieRpFunctionSwap;
+
+/** Offset 0x0A72 - PCI Express Slot Selection
+ Select the PCIe M2 or CEMx4 slot.0: CEMx4 slot; 1: M2 slot(Default).
+ $EN_DIS
**/
- UINT8 Reserved48[315];
+ UINT8 CpuPcieSlotSelection;
+
+/** Offset 0x0A73
+**/
+ UINT8 UnusedUpdSpace28;
+
+/** Offset 0x0A74 - CPU PCIE device override table pointer
+ The PCIe device table is being used to override PCIe device ASPM settings. This
+ is a pointer points to a 32bit address. And it's only used in PostMem phase. Please
+ refer to CPU_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId
+ must be 0.
+**/
+ UINT32 CpuPcieDeviceOverrideTablePtr;
+
+/** Offset 0x0A78 - Enable PCIE RP HotPlug
+ Indicate whether the root port is hot plug available.
+**/
+ UINT8 CpuPcieRpHotPlug[4];
+
+/** Offset 0x0A7C - Enable PCIE RP Pm Sci
+ Indicate whether the root port power manager SCI is enabled.
+**/
+ UINT8 CpuPcieRpPmSci[4];
+
+/** Offset 0x0A80 - Enable PCIE RP Transmitter Half Swing
+ Indicate whether the Transmitter Half Swing is enabled.
+**/
+ UINT8 CpuPcieRpTransmitterHalfSwing[4];
+
+/** Offset 0x0A84 - PCIE RP Access Control Services Extended Capability
+ Enable/Disable PCIE RP Access Control Services Extended Capability
+**/
+ UINT8 CpuPcieRpAcsEnabled[4];
+
+/** Offset 0x0A88 - PCIE RP Clock Power Management
+ Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
+ can still be controlled by L1 PM substates mechanism
+**/
+ UINT8 CpuPcieRpEnableCpm[4];
+
+/** Offset 0x0A8C - PCIE RP Advanced Error Report
+ Indicate whether the Advanced Error Reporting is enabled.
+**/
+ UINT8 CpuPcieRpAdvancedErrorReporting[4];
+
+/** Offset 0x0A90 - PCIE RP Unsupported Request Report
+ Indicate whether the Unsupported Request Report is enabled.
+**/
+ UINT8 CpuPcieRpUnsupportedRequestReport[4];
+
+/** Offset 0x0A94 - PCIE RP Fatal Error Report
+ Indicate whether the Fatal Error Report is enabled.
+**/
+ UINT8 CpuPcieRpFatalErrorReport[4];
+
+/** Offset 0x0A98 - PCIE RP No Fatal Error Report
+ Indicate whether the No Fatal Error Report is enabled.
+**/
+ UINT8 CpuPcieRpNoFatalErrorReport[4];
+
+/** Offset 0x0A9C - PCIE RP Correctable Error Report
+ Indicate whether the Correctable Error Report is enabled.
+**/
+ UINT8 CpuPcieRpCorrectableErrorReport[4];
+
+/** Offset 0x0AA0 - PCIE RP System Error On Fatal Error
+ Indicate whether the System Error on Fatal Error is enabled.
+**/
+ UINT8 CpuPcieRpSystemErrorOnFatalError[4];
+
+/** Offset 0x0AA4 - PCIE RP System Error On Non Fatal Error
+ Indicate whether the System Error on Non Fatal Error is enabled.
+**/
+ UINT8 CpuPcieRpSystemErrorOnNonFatalError[4];
+
+/** Offset 0x0AA8 - PCIE RP System Error On Correctable Error
+ Indicate whether the System Error on Correctable Error is enabled.
+**/
+ UINT8 CpuPcieRpSystemErrorOnCorrectableError[4];
+
+/** Offset 0x0AAC - PCIE RP Max Payload
+ Max Payload Size supported, Default 128B, see enum CPU_PCIE_MAX_PAYLOAD.
+**/
+ UINT8 CpuPcieRpMaxPayload[4];
+
+/** Offset 0x0AB0 - DPC for PCIE RP Mask
+ Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT8 CpuPcieRpDpcEnabled[4];
+
+/** Offset 0x0AB4 - DPC Extensions PCIE RP Mask
+ Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit
+ for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT8 CpuPcieRpDpcExtensionsEnabled[4];
+
+/** Offset 0x0AB8 - CPU PCIe root port connection type
+ 0: built-in device, 1:slot
+**/
+ UINT8 CpuPcieRpSlotImplemented[4];
+
+/** Offset 0x0ABC - PCIE RP Gen3 Equalization Phase Method
+ PCIe Gen3 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
+ 1: hardware equalization; 4: Fixed Coeficients.
+**/
+ UINT8 CpuPcieRpGen3EqPh3Method[4];
+
+/** Offset 0x0AC0 - PCIE RP Gen4 Equalization Phase Method
+ PCIe Gen4 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
+ 1: hardware equalization; 4: Fixed Coeficients.
+**/
+ UINT8 CpuPcieRpGen4EqPh3Method[4];
+
+/** Offset 0x0AC4 - PCIE RP Physical Slot Number
+ Indicates the slot number for the root port. Default is the value as root port index.
+**/
+ UINT8 CpuPcieRpPhysicalSlotNumber[4];
+
+/** Offset 0x0AC8 - PCIE RP Aspm
+ The ASPM configuration of the root port (see: CPU_PCIE_ASPM_CONTROL).0: Disable;
+ 2: CpuPcieAspmL1(Default)
+**/
+ UINT8 CpuPcieRpAspm[4];
+
+/** Offset 0x0ACC - PCIE RP L1 Substates
+ The L1 Substates configuration of the root port (see: CPU_PCIE_L1SUBSTATES_CONTROL).
+ Default is CpuPcieL1SubstatesL1_1_2.
+**/
+ UINT8 CpuPcieRpL1Substates[4];
+
+/** Offset 0x0AD0 - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 CpuPcieRpLtrEnable[4];
+
+/** Offset 0x0AD4 - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 CpuPcieRpLtrConfigLock[4];
/** Offset 0x0AD8 - RpPtmBytes
**/
UINT8 RpPtmBytes[4];
-/** Offset 0x0ADC - Reserved
+/** Offset 0x0ADC - PCIE RP Detect Timeout Ms
+ The number of milliseconds within 0~65535 in reference code will wait for link to
+ exit Detect state for enabled ports before assuming there is no device and potentially
+ disabling the port.
+**/
+ UINT16 CpuPcieRpDetectTimeoutMs[4];
+
+/** Offset 0x0AE4 - VC for PCIE RP Mask
+ Enable/disable Virtual Channel for PCIE Root Ports. 0: disable, 1: enable. One bit
+ for each port, bit0 for port1, bit1 for port2, and so on.
**/
- UINT8 Reserved49[16];
+ UINT8 CpuPcieRpVcEnabled[4];
+
+/** Offset 0x0AE8 - Multi-VC for PCIE RP Mask
+ Enable/disable Multiple Virtual Channel for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT8 CpuPcieRpMultiVcEnabled[4];
/** Offset 0x0AEC - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3
Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each
@@ -2454,9 +3167,29 @@ typedef struct {
**/
UINT8 SkipCdClockInit;
-/** Offset 0x0B44 - Reserved
+/** Offset 0x0B44 - Enable RC1p frequency request to PMA (provided all other conditions are met)
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 RC1pFreqEnable;
+
+/** Offset 0x0B45 - Enable TSN Multi-VC
+ Enable/disable Multi Virtual Channels(VC) in TSN.
+ $EN_DIS
+**/
+ UINT8 PchTsnMultiVcEnable;
+
+/** Offset 0x0B46 - SaPostMemTestRsvd
+ Reserved for SA Post-Mem Test
+ $EN_DIS
**/
- UINT8 Reserved50[16];
+ UINT8 SaPostMemTestRsvd[13];
+
+/** Offset 0x0B53 - RSR feature
+ Enable or Disable RSR feature; 0: Disable; <b>1: Enable </b>
+ $EN_DIS
+**/
+ UINT8 EnableRsr;
/** Offset 0x0B54 - 1-Core Ratio Limit
1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
@@ -2736,9 +3469,11 @@ typedef struct {
**/
UINT8 DisableVrThermalAlert;
-/** Offset 0x0B82 - Reserved
+/** Offset 0x0B82 - Enable or Disable Thermal Reporting
+ Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
**/
- UINT8 Reserved51;
+ UINT8 EnableAllThermalFunctions;
/** Offset 0x0B83 - Enable or Disable Thermal Monitor
Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b>
@@ -2874,9 +3609,9 @@ typedef struct {
**/
UINT8 StateRatioMax16[16];
-/** Offset 0x0BCF - Reserved
+/** Offset 0x0BCF
**/
- UINT8 Reserved52;
+ UINT8 UnusedUpdSpace29;
/** Offset 0x0BD0 - Platform Power Pmax
PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
@@ -3112,18 +3847,40 @@ typedef struct {
**/
UINT8 EnableFastMsrHwpReq;
-/** Offset 0x0C22 - Reserved
+/** Offset 0x0C22 - Enable Configurable TDP
+ Applies TDP initialization settings based on non-cTDP or cTDP.; 0: Applies to non-cTDP;
+ <b>1: Applies to cTDP</b>
+ $EN_DIS
+**/
+ UINT8 ApplyConfigTdp;
+
+/** Offset 0x0C23 - Enable VccIn Demotion Override Configuration
+ Enable VccIn Demotion Override Configuration. The timing can be configured by VccInDemotionMs.
+ $EN_DIS
+**/
+ UINT8 VccInDemotionOverride;
+
+/** Offset 0x0C24 - Customize the VccIn Demotion in ms.
+ Customize the VccIn Demotion in ms accordingly. Values used by OEM expected to be
+ in lower end of 1-30 ms range. Value 1 means 1ms, value 2 means 2ms, and so on.
+ Value 0 will disable VccIn Demotion knob.<b> It's 30ms by silicon default</b>
**/
- UINT8 Reserved53[17];
+ UINT32 VccInDemotionMs;
+
+/** Offset 0x0C28 - ReservedCpuPostMemTest
+ Reserved for CPU Post-Mem Test
+ $EN_DIS
+**/
+ UINT8 ReservedCpuPostMemTest[11];
/** Offset 0x0C33 - SgxSinitDataFromTpm
SgxSinitDataFromTpm default values
**/
UINT8 SgxSinitDataFromTpm;
-/** Offset 0x0C34 - Reserved
+/** Offset 0x0C34
**/
- UINT8 Reserved54[16];
+ UINT8 SecurityPostMemRsvd[16];
/** Offset 0x0C44 - End of Post message
Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
@@ -3255,9 +4012,185 @@ typedef struct {
**/
UINT8 MctpBroadcastCycle;
-/** Offset 0x0DB9 - Reserved
+/** Offset 0x0DB9
+**/
+ UINT8 UnusedUpdSpace30[1];
+
+/** Offset 0x0DBA - PCIE RP Ltr Max Snoop Latency
+ Latency Tolerance Reporting, Max Snoop Latency.
+**/
+ UINT16 CpuPcieRpLtrMaxSnoopLatency[4];
+
+/** Offset 0x0DC2 - PCIE RP Ltr Max No Snoop Latency
+ Latency Tolerance Reporting, Max Non-Snoop Latency.
+**/
+ UINT16 CpuPcieRpLtrMaxNoSnoopLatency[4];
+
+/** Offset 0x0DCA - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 CpuPcieRpSnoopLatencyOverrideMode[4];
+
+/** Offset 0x0DCE - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 CpuPcieRpSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x0DD2 - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 CpuPcieRpSnoopLatencyOverrideValue[4];
+
+/** Offset 0x0DDA - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 CpuPcieRpNonSnoopLatencyOverrideMode[4];
+
+/** Offset 0x0DDE - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 CpuPcieRpNonSnoopLatencyOverrideMultiplier[4];
+
+/** Offset 0x0DE2 - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 CpuPcieRpNonSnoopLatencyOverrideValue[4];
+
+/** Offset 0x0DEA - PCIE RP Upstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
+**/
+ UINT8 CpuPcieRpGen3Uptp[4];
+
+/** Offset 0x0DEE - PCIE RP Downstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
+**/
+ UINT8 CpuPcieRpGen3Dptp[4];
+
+/** Offset 0x0DF2 - PCIE RP Upstream Port Transmiter Preset
+ Used during Gen4 Link Equalization. Used for all lanes. Default is 8.
+**/
+ UINT8 CpuPcieRpGen4Uptp[4];
+
+/** Offset 0x0DF6 - PCIE RP Downstream Port Transmiter Preset
+ Used during Gen4 Link Equalization. Used for all lanes. Default is 9.
+**/
+ UINT8 CpuPcieRpGen4Dptp[4];
+
+/** Offset 0x0DFA - PMC C10 dynamic threshold dajustment enable
+ Set if you want to enable PMC C10 dynamic threshold adjustment. Only works on supported SKUs
+ $EN_DIS
+**/
+ UINT8 PmcC10DynamicThresholdAdjustment;
+
+/** Offset 0x0DFB - FOMS Control Policy
+ Choose the Foms Control Policy, <b>Default = 0 </b>
+ 0: Auto, 1: Gen3 Foms, 2: Gen4 Foms, 3: Gen3 and Gen4 Foms
+**/
+ UINT8 CpuPcieFomsCp[4];
+
+/** Offset 0x0DFF
+**/
+ UINT8 UnusedUpdSpace31;
+
+/** Offset 0x0E00 - LogoPixelHeight Address
+ Address of LogoPixelHeight
+**/
+ UINT32 LogoPixelHeight;
+
+/** Offset 0x0E04 - LogoPixelWidth Address
+ Address of LogoPixelWidth
+**/
+ UINT32 LogoPixelWidth;
+
+/** Offset 0x0E08 - P2P mode for PCIE RP
+ Enable/disable peer to peer mode for PCIE Root Ports. 0: Disable, 1: Enable.
+ 0: Disable, 1: Enable
+**/
+ UINT8 CpuPcieRpPeerToPeerMode[4];
+
+/** Offset 0x0E0C - Map port under VMD
+ Map/UnMap port under VMD
+ $EN_DIS
+**/
+ UINT8 VmdPort[31];
+
+/** Offset 0x0E2B - VMD Port Device
+ VMD Root port device number.
+**/
+ UINT8 VmdPortDev[31];
+
+/** Offset 0x0E4A - VMD Port Func
+ VMD Root port function number.
+**/
+ UINT8 VmdPortFunc[31];
+
+/** Offset 0x0E69
+**/
+ UINT8 UnusedUpdSpace32[3];
+
+/** Offset 0x0E6C - VMD Variable
+ VMD Variable Pointer.
+**/
+ UINT32 VmdVariablePtr;
+
+/** Offset 0x0E70 - Thermal Design Current time window
+ PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
+ Range 1ms to 448s
+**/
+ UINT32 TdcTimeWindow1[5];
+
+/** Offset 0x0E84 - Temporary CfgBar address for VMD
+ PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
+ Range 1ms to 448s
+**/
+ UINT32 VmdCfgBarBase;
+
+/** Offset 0x0E88 - Temporary MemBar1 address for VMD
+ PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
+ Range 1ms to 448s
+**/
+ UINT32 VmdMemBar1Base;
+
+/** Offset 0x0E8C - Temporary MemBar2 address for VMD
+ PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
+ Range 1ms to 448s
+**/
+ UINT32 VmdMemBar2Base;
+
+/** Offset 0x0E90 - PCH TSN1 MAC Address High Bits
+ Set TSN1 MAC Address High.
+**/
+ UINT32 PchTsn1MacAddressHigh;
+
+/** Offset 0x0E94 - PCH TSN1 MAC Address Low Bits
+ Set TSN1 MAC Address Low.
+**/
+ UINT32 PchTsn1MacAddressLow;
+
+/** Offset 0x0E98 - FspEventHandler
+ <b>Optional</b> pointer to the boot loader's implementation of FSP_EVENT_HANDLER.
+**/
+ UINT32 FspEventHandler;
+
+/** Offset 0x0E9C - Enable VMD Global Mapping
+ Enable/disable to VMD controller.0: Disable(Default); 1: Enable
+ $EN_DIS
+**/
+ UINT8 VmdGlobalMapping;
+
+/** Offset 0x0E9D - PCH XHCI LTR Mode Enable
+ Enable/Disable PCH XHCI LTR Mode.0: Disable; 1: Enable(Default).
+ $EN_DIS
+**/
+ UINT8 PchXhciLtrModeEnable;
+
+/** Offset 0x0E9E
+**/
+ UINT8 UnusedUpdSpace33[3];
+
+/** Offset 0x0EA1
**/
- UINT8 Reserved55[239];
+ UINT8 ReservedFspsUpd[7];
} FSP_S_CONFIG;
/** Fsp S UPD Configuration
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 13:26:29 +0000