diff options
author | Lijian Zhao <lijian.zhao@intel.com> | 2018-08-23 06:54:59 -0700 |
---|---|---|
committer | Martin Roth <martinroth@google.com> | 2018-08-28 15:12:44 +0000 |
commit | f3122426b851b9ca009e501a8d8c60d062f84c98 (patch) | |
tree | f93fb806c11b0e3602a022c3dd8f42891e5074fa /src/vendorcode/intel | |
parent | 990d825196227190d3625c3b44a082816748bc3b (diff) |
fsp/fsp2_0/coffeelake: Update CFL FSP headers
Coffeelake FSP headers had been updated to version 7.0.3D.60. Original
file location from https://github.com/IntelFsp/FSP/tree/master/
CoffeeLakeFspBinPkg/Include .
BUG=N/A
TEST=Build and flash, able to boot up into OS on whiskeylake rvp
platform.
Change-Id: I656da83e9042642576b785643e423ba47da8dd73
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/28286
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/vendorcode/intel')
-rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspmUpd.h | 117 | ||||
-rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspsUpd.h | 6475 |
2 files changed, 3351 insertions, 3241 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspmUpd.h index bfe581b581..5a1580cb3c 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspmUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspmUpd.h @@ -37,19 +37,19 @@ are permitted provided that the following conditions are met: #pragma pack(1) -
-#include <MemInfoHob.h>
-
-///
-/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC.
-///
-typedef struct {
- UINT8 Revision; ///< Chipset Init Info Revision
- UINT8 Rsvd[3]; ///< Reserved
- UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table
- UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table
-} CHIPSET_INIT_INFO;
-
+ +#include <MemInfoHob.h> + +/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + /** Fsp M Configuration **/ @@ -331,9 +331,16 @@ typedef struct { **/ UINT8 ScramblerSupport; -/** Offset 0x00C8 +/** Offset 0x00C8 - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. </b>0: Initialize; <b>1: Skip + $EN_DIS +**/ + UINT8 SkipMpInit; + +/** Offset 0x00C9 **/ - UINT8 UnusedUpdSpace1[16]; + UINT8 UnusedUpdSpace1[15]; /** Offset 0x00D8 - SPD Profile Selected Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP @@ -479,7 +486,9 @@ typedef struct { UINT8 CpuTraceHubMemReg1Size; /** Offset 0x00F6 - Enable or Disable Peci C10 Reset command - Enable or Disable Peci C10 Reset command; <b>0: Disable;</b> 1: Enable. + Enable or Disable Peci C10 Reset command. If Enabled, BIOS will send the CPU message + to disable peci reset on C10 exit. The default value is <b>0: Disable</b> for CNL, + and <b>1: Enable</b> for all other CPU's $EN_DIS **/ UINT8 PeciC10Reset; @@ -949,7 +958,7 @@ typedef struct { /** Offset 0x0205 - Maximum Core Turbo Ratio Override Maximum core turbo ratio override allows to increase CPU core frequency beyond the - fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-83 + fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-255 **/ UINT8 CoreMaxOcRatio; @@ -959,13 +968,15 @@ typedef struct { **/ UINT8 CoreVoltageMode; -/** Offset 0x0207 +/** Offset 0x0207 - Program Cache Attributes + Program Cache Attributes; <b>0: Program</b>; 1: Disable Program. + $EN_DIS **/ - UINT8 UnusedUpdSpace6; + UINT8 DisableMtrrProgram; /** Offset 0x0208 - Maximum clr turbo ratio override Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the - fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-83 + fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-255 **/ UINT8 RingMaxOcRatio; @@ -1116,7 +1127,7 @@ typedef struct { /** Offset 0x0227 **/ - UINT8 UnusedUpdSpace7; + UINT8 UnusedUpdSpace6; /** Offset 0x0228 - PrmrrSize 0=Invalid, 32MB=0x2000000, 64MB=0x4000000, 128MB=0x8000000, 256MB=0x10000000 @@ -1861,12 +1872,12 @@ typedef struct { UINT8 RhActProbability; /** Offset 0x04C1 - RAPL PL 2 WindowX - Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) + Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (1=Def) **/ UINT8 RaplLim2WindX; /** Offset 0x04C2 - RAPL PL 2 WindowY - Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) + Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (1=Def) **/ UINT8 RaplLim2WindY; @@ -1881,52 +1892,52 @@ typedef struct { UINT8 RaplLim1WindY; /** Offset 0x04C5 - RAPL PL 2 Power - range[0;2^14-1]= [2047.875;0]in W, (224= Def) + range[0;2^14-1]= [2047.875;0]in W, (222= Def) **/ UINT16 RaplLim2Pwr; /** Offset 0x04C7 - RAPL PL 1 Power - range[0;2^14-1]= [2047.875;0]in W, (224= Def) + range[0;2^14-1]= [2047.875;0]in W, (0= Def) **/ UINT16 RaplLim1Pwr; /** Offset 0x04C9 - Warm Threshold Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 **/ UINT8 WarmThresholdCh0Dimm0; /** Offset 0x04CA - Warm Threshold Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 **/ UINT8 WarmThresholdCh0Dimm1; /** Offset 0x04CB - Warm Threshold Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 **/ UINT8 WarmThresholdCh1Dimm0; /** Offset 0x04CC - Warm Threshold Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 **/ UINT8 WarmThresholdCh1Dimm1; /** Offset 0x04CD - Hot Threshold Ch0 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 **/ UINT8 HotThresholdCh0Dimm0; /** Offset 0x04CE - Hot Threshold Ch0 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 **/ UINT8 HotThresholdCh0Dimm1; /** Offset 0x04CF - Hot Threshold Ch1 Dimm0 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 **/ UINT8 HotThresholdCh1Dimm0; /** Offset 0x04D0 - Hot Threshold Ch1 Dimm1 - range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255 **/ UINT8 HotThresholdCh1Dimm1; @@ -2072,7 +2083,7 @@ typedef struct { /** Offset 0x04ED - Throttler CKEMin Timer Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). - Dfault is 0x30 + Default is 0x30 **/ UINT8 ThrtCkeMinTmr; @@ -2286,9 +2297,34 @@ typedef struct { **/ UINT8 DualDimmPerChannelBoardType; -/** Offset 0x0510 +/** Offset 0x0510 - DDR4 Mixed U-DIMM 2DPC Limitation + Enable/Disable 2667 Frequency Limitation for DDR4 U-DIMM Mixed Dimm 2DPC population. + Disable(Default)=0, Enable=1 + $EN_DIS **/ - UINT8 ReservedFspmUpd[15]; + UINT8 Ddr4MixedUDimm2DpcLimit; + +/** Offset 0x0511 - CFL Reserved + Reserved FspmConfig CFL + $EN_DIS +**/ + UINT8 ReservedFspmUpdCfl[2]; + +/** Offset 0x0513 - Memory Test on Warm Boot + Run Base Memory Test on Warm Boot + 0:Disable, 1:Enable +**/ + UINT8 MemTestOnWarmBoot; + +/** Offset 0x0514 - Throttler CKEMin Timer - LPDDR + Timer value for CKEMin (For LPDDR Only), range[255;0]. Req'd min of SC_ROUND_T + + BYTE_LENGTH (4). Default is 0x40 +**/ + UINT8 ThrtCkeMinTmrLpddr; + +/** Offset 0x0515 +**/ + UINT8 ReservedFspmUpd[10]; } FSP_M_CONFIG; /** Fsp M Test Configuration @@ -2513,7 +2549,7 @@ typedef struct { /** Offset 0x0579 **/ - UINT8 UnusedUpdSpace9; + UINT8 UnusedUpdSpace8; /** Offset 0x057A - Jitter Dwell Time for PCIe Gen3 Software Equalization Range: 0-65535, default is 1000. @warning Do not change from the default @@ -2596,14 +2632,13 @@ typedef struct { UINT8 SmbusSpdWriteDisable; /** Offset 0x059B - ChipsetInit HECI message - Enable/Disable. 0: Disable, 1: enable, Enable or disable ChipsetInit HECI message. - If disabled, it prevents from sending ChipsetInit HECI message. + DEPRECATED $EN_DIS **/ UINT8 ChipsetInitMessage; /** Offset 0x059C - Bypass ChipsetInit sync reset. - 0: disable, 1: enable, Set Enable to bypass the reset after ChipsetInit HECI message. + DEPRECATED $EN_DIS **/ UINT8 BypassPhySyncReset; @@ -2788,7 +2823,7 @@ typedef struct { /** Offset 0x051F **/ - UINT8 UnusedUpdSpace8; + UINT8 UnusedUpdSpace7; /** Offset 0x0520 **/ diff --git a/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspsUpd.h index ac4fd58d6a..653e669b4a 100644 --- a/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspsUpd.h +++ b/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspsUpd.h @@ -1,42 +1,42 @@ -/** @file - -Copyright (c) 2018, Intel Corporation. All rights reserved.<BR> - -Redistribution and use in source and binary forms, with or without modification, -are permitted provided that the following conditions are met: - -* Redistributions of source code must retain the above copyright notice, this - list of conditions and the following disclaimer. -* Redistributions in binary form must reproduce the above copyright notice, this - list of conditions and the following disclaimer in the documentation and/or - other materials provided with the distribution. -* Neither the name of Intel Corporation nor the names of its contributors may - be used to endorse or promote products derived from this software without - specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF - THE POSSIBILITY OF SUCH DAMAGE. - - This file is automatically generated. Please do NOT modify !!! - -**/ - -#ifndef __FSPSUPD_H__ -#define __FSPSUPD_H__ - -#include <FspUpd.h> - -#pragma pack(1) - +/** @file
+
+Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPSUPD_H__
+#define __FSPSUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
///
/// Azalia Header structure
@@ -80,3164 +80,3239 @@ typedef struct { #define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices
- -/** Fsp S Configuration -**/ -typedef struct { - -/** Offset 0x0020 - Logo Pointer - Points to PEI Display Logo Image -**/ - UINT32 LogoPtr; - -/** Offset 0x0024 - Logo Size - Size of PEI Display Logo Image -**/ - UINT32 LogoSize; - -/** Offset 0x0028 - Graphics Configuration Ptr - Points to VBT -**/ - UINT32 GraphicsConfigPtr; - -/** Offset 0x002C - Enable Device 4 - Enable/disable Device 4 - $EN_DIS -**/ - UINT8 Device4Enable; - -/** Offset 0x002D - Enable HD Audio DSP - Enable/disable HD Audio DSP feature. - $EN_DIS -**/ - UINT8 PchHdaDspEnable; - -/** Offset 0x002E -**/ - UINT8 UnusedUpdSpace0[3]; - -/** Offset 0x0031 - Enable eMMC Controller - Enable/disable eMMC Controller. - $EN_DIS -**/ - UINT8 ScsEmmcEnabled; - -/** Offset 0x0032 - Enable eMMC HS400 Mode - Enable eMMC HS400 Mode. - $EN_DIS -**/ - UINT8 ScsEmmcHs400Enabled; - -/** Offset 0x0033 - Enable SdCard Controller - Enable/disable SD Card Controller. - $EN_DIS -**/ - UINT8 ScsSdCardEnabled; - -/** Offset 0x0034 - Show SPI controller - Enable/disable to show SPI controller. - $EN_DIS -**/ - UINT8 ShowSpiController; - -/** Offset 0x0035 -**/ - UINT8 UnusedUpdSpace1[3]; - -/** Offset 0x0038 - MicrocodeRegionBase - Memory Base of Microcode Updates -**/ - UINT32 MicrocodeRegionBase; - -/** Offset 0x003C - MicrocodeRegionSize - Size of Microcode Updates -**/ - UINT32 MicrocodeRegionSize; - -/** Offset 0x0040 - Turbo Mode - Enable/Disable Turbo mode. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 TurboMode; - -/** Offset 0x0041 - Enable SATA SALP Support - Enable/disable SATA Aggressive Link Power Management. - $EN_DIS -**/ - UINT8 SataSalpSupport; - -/** Offset 0x0042 - Enable SATA ports - Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, - and so on. -**/ - UINT8 SataPortsEnable[8]; - -/** Offset 0x004A - Enable SATA DEVSLP Feature - Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each - port, byte0 for port0, byte1 for port1, and so on. -**/ - UINT8 SataPortsDevSlp[8]; - -/** Offset 0x0052 - Enable USB2 ports - Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for - port1, and so on. -**/ - UINT8 PortUsb20Enable[16]; - -/** Offset 0x0062 - Enable USB3 ports - Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for - port1, and so on. -**/ - UINT8 PortUsb30Enable[10]; - -/** Offset 0x006C - Enable xDCI controller - Enable/disable to xDCI controller. - $EN_DIS -**/ - UINT8 XdciEnable; - -/** Offset 0x006D -**/ - UINT8 UnusedUpdSpace2[2]; - -/** Offset 0x006F - Enable SerialIo Device Mode - 0:Disabled, 1:PCI Mode, 2:Acpi mode, 3:Hidden mode (Legacy UART mode) - Enable/disable - SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5,SPI0,SPI1,SPI2,UART0,UART1,UART2 device - mode respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, - and so on. -**/ - UINT8 SerialIoDevMode[12]; - -/** Offset 0x007B - Address of PCH_DEVICE_INTERRUPT_CONFIG table. - The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. -**/ - UINT32 DevIntConfigPtr; - -/** Offset 0x007F - Number of DevIntConfig Entry - Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr - must not be NULL. -**/ - UINT8 NumOfDevIntConfig; - -/** Offset 0x0080 - PIRQx to IRQx Map Config - PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for - PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy - 8259 PCI mode. -**/ - UINT8 PxRcConfig[8]; - -/** Offset 0x0088 - Select GPIO IRQ Route - GPIO IRQ Select. The valid value is 14 or 15. -**/ - UINT8 GpioIrqRoute; - -/** Offset 0x0089 - Select SciIrqSelect - SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. -**/ - UINT8 SciIrqSelect; - -/** Offset 0x008A - Select TcoIrqSelect - TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. -**/ - UINT8 TcoIrqSelect; - -/** Offset 0x008B - Enable/Disable Tco IRQ - Enable/disable TCO IRQ - $EN_DIS -**/ - UINT8 TcoIrqEnable; - -/** Offset 0x008C - PCH HDA Verb Table Entry Number - Number of Entries in Verb Table. -**/ - UINT8 PchHdaVerbTableEntryNum; - -/** Offset 0x008D - PCH HDA Verb Table Pointer - Pointer to Array of pointers to Verb Table. -**/ - UINT32 PchHdaVerbTablePtr; - -/** Offset 0x0091 - PCH HDA Codec Sx Wake Capability - Capability to detect wake initiated by a codec in Sx -**/ - UINT8 PchHdaCodecSxWakeCapability; - -/** Offset 0x0092 - Enable SATA - Enable/disable SATA controller. - $EN_DIS -**/ - UINT8 SataEnable; - -/** Offset 0x0093 - SATA Mode - Select SATA controller working mode. - 0:AHCI, 1:RAID -**/ - UINT8 SataMode; - -/** Offset 0x0094 - USB Per Port HS Preemphasis Bias - USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, - 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. -**/ - UINT8 Usb2AfePetxiset[16]; - -/** Offset 0x00A4 - USB Per Port HS Transmitter Bias - USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, - 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. -**/ - UINT8 Usb2AfeTxiset[16]; - -/** Offset 0x00B4 - USB Per Port HS Transmitter Emphasis - USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, - 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. -**/ - UINT8 Usb2AfePredeemp[16]; - -/** Offset 0x00C4 - USB Per Port Half Bit Pre-emphasis - USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. - One byte for each port. -**/ - UINT8 Usb2AfePehalfbit[16]; - -/** Offset 0x00D4 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value - in arrary can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxDeEmphEnable[10]; - -/** Offset 0x00DE - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], - <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port. -**/ - UINT8 Usb3HsioTxDeEmph[10]; - -/** Offset 0x00E8 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value - in arrary can be between 0-1. One byte for each port. -**/ - UINT8 Usb3HsioTxDownscaleAmpEnable[10]; - -/** Offset 0x00F2 - USB 3.0 TX Output Downscale Amplitude Adjustment - USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default - = 00h</b>. One byte for each port. -**/ - UINT8 Usb3HsioTxDownscaleAmp[10]; - -/** Offset 0x00FC - Enable LAN - Enable/disable LAN controller. - $EN_DIS -**/ - UINT8 PchLanEnable; - -/** Offset 0x00FD - Enable HD Audio Link - Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkHda; - -/** Offset 0x00FE - Enable HD Audio DMIC0 Link - Enable/disable HD Audio DMIC0 link. Muxed with SNDW4. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkDmic0; - -/** Offset 0x00FF - Enable HD Audio DMIC1 Link - Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkDmic1; - -/** Offset 0x0100 - Enable HD Audio SSP0 Link - Enable/disable HD Audio SSP0/I2S link. Muxed with HDA. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp0; - -/** Offset 0x0101 - Enable HD Audio SSP1 Link - Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp1; - -/** Offset 0x0102 - Enable HD Audio SSP2 Link - Enable/disable HD Audio SSP2/I2S link. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSsp2; - -/** Offset 0x0103 - Enable HD Audio SoundWire#1 Link - Enable/disable HD Audio SNDW1 link. Muxed with HDA. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw1; - -/** Offset 0x0104 - Enable HD Audio SoundWire#2 Link - Enable/disable HD Audio SNDW2 link. Muxed with SSP1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw2; - -/** Offset 0x0105 - Enable HD Audio SoundWire#3 Link - Enable/disable HD Audio SNDW3 link. Muxed with DMIC1. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw3; - -/** Offset 0x0106 - Enable HD Audio SoundWire#4 Link - Enable/disable HD Audio SNDW4 link. Muxed with DMIC0. - $EN_DIS -**/ - UINT8 PchHdaAudioLinkSndw4; - -/** Offset 0x0107 - Soundwire Clock Buffer GPIO RCOMP Setting - 0: non-ACT - 50 Ohm driver impedance, 1: ACT - 8 Ohm driver impedance. - $EN_DIS -**/ - UINT8 PchHdaSndwBufferRcomp; - -/** Offset 0x0108 - PTM for PCIE RP Mask - Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable. - One bit for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpPtmMask; - -/** Offset 0x010C - DPC for PCIE RP Mask - Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable. - One bit for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpDpcMask; - -/** Offset 0x0110 - DPC Extensions PCIE RP Mask - Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit - for each port, bit0 for port1, bit1 for port2, and so on. -**/ - UINT32 PcieRpDpcExtensionsMask; - -/** Offset 0x0114 - USB PDO Programming - Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming - during later phase. 1: enable, 0: disable - $EN_DIS -**/ - UINT8 UsbPdoProgramming; - -/** Offset 0x0115 - Power button debounce configuration - Debounce time for PWRBTN in microseconds. For values not supported by HW, they will - be rounded down to closest supported on. 0: disable, 250-1024000us: supported range -**/ - UINT32 PmcPowerButtonDebounce; - -/** Offset 0x0119 - PCH eSPI Master and Slave BME enabled - PCH eSPI Master and Slave BME enabled - $EN_DIS -**/ - UINT8 PchEspiBmeMasterSlaveEnabled; - -/** Offset 0x011A - PCH SATA use RST Legacy OROM - Use PCH SATA RST Legacy OROM when CSM is Enabled - $EN_DIS -**/ - UINT8 SataRstLegacyOrom; - -/** Offset 0x011B - Trace Hub Memory Base - If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate - trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub - memory is configured properly. -**/ - UINT32 TraceHubMemBase; - -/** Offset 0x011F - PMC Debug Message Enable - When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW - will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix - $EN_DIS -**/ - UINT8 PmcDbgMsgEn; - -/** Offset 0x0120 - PchPostMemRsvd - Reserved for PCH Post-Mem - $EN_DIS -**/ - UINT8 PchPostMemRsvd[37]; - -/** Offset 0x0145 - Enable Ufs Controller - Enable/disable Ufs 2.0 Controller. - $EN_DIS -**/ - UINT8 ScsUfsEnabled; - -/** Offset 0x0146 - CNVi Configuration - This option allows for automatic detection of Connectivity Solution. [Auto Detection] - assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. - 0:Disable, 1:Auto -**/ - UINT8 PchCnviMode; - -/** Offset 0x0147 - SdCard power enable polarity - Choose SD_PWREN# polarity - 0: Active low, 1: Active high -**/ - UINT8 SdCardPowerEnableActiveHigh; - -/** Offset 0x0148 - PCH USB2 PHY Power Gating enable - 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY - Sus Well PG - $EN_DIS -**/ - UINT8 PchUsb2PhySusPgEnable; - -/** Offset 0x0149 - PCH USB OverCurrent mapping enable - 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin - mapping allow for NOA usage of OC pins - $EN_DIS -**/ - UINT8 PchUsbOverCurrentEnable; - -/** Offset 0x014A -**/ - UINT8 UnusedUpdSpace3; - -/** Offset 0x014B - CNVi MfUart1 Type - This option configures Uart type which connects to MfUart1 - 0:ISH Uart0, 1:SerialIO Uart2, 2:Uart over external pads -**/ - UINT8 PchCnviMfUart1Type; - -/** Offset 0x014C - Espi Lgmr Memory Range decode - This option enables or disables espi lgmr - $EN_DIS -**/ - UINT8 PchEspiLgmrEnable; - -/** Offset 0x014D - HECI3 state - The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed. - 0: disable, 1: enable - $EN_DIS -**/ - UINT8 Heci3Enabled; - -/** Offset 0x014E -**/ - UINT8 UnusedUpdSpace4; - -/** Offset 0x014F - PCHHOT# pin - Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchHotEnable; - -/** Offset 0x0150 - SATA LED - SATA LED indicating SATA controller activity. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 SataLedEnable; - -/** Offset 0x0151 - VRAlert# Pin - When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling - to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmVrAlert; - -/** Offset 0x0152 - SLP_S0 VM Dynamic Control - SLP_S0 Voltage Margining Runtime Control Policy. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmSlpS0VmRuntimeControl; - -/** Offset 0x0153 - SLP_S0 VM 0.70V Support - SLP_S0 Voltage Margining 0.70V Support Policy. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmSlpS0Vm070VSupport; - -/** Offset 0x0154 - SLP_S0 VM 0.75V Support - SLP_S0 Voltage Margining 0.75V Support Policy. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PchPmSlpS0Vm075VSupport; - -/** Offset 0x0155 - AMT Switch - Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. - $EN_DIS -**/ - UINT8 AmtEnabled; - -/** Offset 0x0156 - WatchDog Timer Switch - Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. - $EN_DIS -**/ - UINT8 WatchDog; - -/** Offset 0x0157 - ASF Switch - Enable/Disable. 0: Disable, 1: enable, Enable or disable ASF functionality. - $EN_DIS -**/ - UINT8 AsfEnabled; - -/** Offset 0x0158 - Manageability Mode set by Mebx - Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode. - $EN_DIS -**/ - UINT8 ManageabilityMode; - -/** Offset 0x0159 - PET Progress - Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive - PET Events. - $EN_DIS -**/ - UINT8 FwProgress; - -/** Offset 0x015A - SOL Switch - Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx - $EN_DIS -**/ - UINT8 AmtSolEnabled; - -/** Offset 0x015B - OS Timer - 16 bits Value, Set OS watchdog timer. - $EN_DIS -**/ - UINT16 WatchDogTimerOs; - -/** Offset 0x015D - BIOS Timer - 16 bits Value, Set BIOS watchdog timer. - $EN_DIS -**/ - UINT16 WatchDogTimerBios; - -/** Offset 0x015F - Remote Assistance Trigger Availablilty - Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx - $EN_DIS -**/ - UINT8 RemoteAssistance; - -/** Offset 0x0160 - KVM Switch - Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx - $EN_DIS -**/ - UINT8 AmtKvmEnabled; - -/** Offset 0x0161 - KVM Switch - Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx - $EN_DIS -**/ - UINT8 ForcMebxSyncUp; - -/** Offset 0x0162 -**/ - UINT8 UnusedUpdSpace5[1]; - -/** Offset 0x0163 - PCH PCIe root port connection type - 0: built-in device, 1:slot -**/ - UINT8 PcieRpSlotImplemented[24]; - -/** Offset 0x017B - Usage type for ClkSrc - 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use - (free running), 0xFF: not used -**/ - UINT8 PcieClkSrcUsage[16]; - -/** Offset 0x018B - ClkReq-to-ClkSrc mapping - Number of ClkReq signal assigned to ClkSrc -**/ - UINT8 PcieClkSrcClkReq[16]; - -/** Offset 0x019B - PCIE RP Access Control Services Extended Capability - Enable/Disable PCIE RP Access Control Services Extended Capability -**/ - UINT8 PcieRpAcsEnabled[24]; - -/** Offset 0x01B3 - PCIE RP Clock Power Management - Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal - can still be controlled by L1 PM substates mechanism -**/ - UINT8 PcieRpEnableCpm[24]; - -/** Offset 0x01CB - PCIE RP Detect Timeout Ms - The number of milliseconds within 0~65535 in reference code will wait for link to - exit Detect state for enabled ports before assuming there is no device and potentially - disabling the port. -**/ - UINT16 PcieRpDetectTimeoutMs[24]; - -/** Offset 0x01FB - ModPHY SUS Power Domain Dynamic Gating - Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on - PCH-H. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 PmcModPhySusPgEnable; - -/** Offset 0x01FC - SlpS0WithGbeSupport - Enable/Disable SLP_S0 with GBE Support. 0: disable, 1: enable - $EN_DIS -**/ - UINT8 SlpS0WithGbeSupport; - -/** Offset 0x01FD -**/ - UINT8 UnusedUpdSpace6[3]; - -/** Offset 0x0200 - Enable/Disable SA CRID - Enable: SA CRID, Disable (Default): SA CRID - $EN_DIS -**/ - UINT8 CridEnable; - -/** Offset 0x0201 - DMI ASPM - 0=Disable, 1:L0s, 2:L1, 3(Default)=L0sL1 - 0:Disable, 1:L0s, 2:L1, 3:L0sL1 -**/ - UINT8 DmiAspm; - -/** Offset 0x0202 - PCIe DeEmphasis control per root port - 0: -6dB, 1(Default): -3.5dB - 0:-6dB, 1:-3.5dB -**/ - UINT8 PegDeEmphasis[4]; - -/** Offset 0x0206 - PCIe Slot Power Limit value per root port - Slot power limit value per root port -**/ - UINT8 PegSlotPowerLimitValue[4]; - -/** Offset 0x020A - PCIe Slot Power Limit scale per root port - Slot power limit scale per root port - 0:1.0x, 1:0.1x, 2:0.01x, 3:0x001x -**/ - UINT8 PegSlotPowerLimitScale[4]; - -/** Offset 0x020E - PCIe Physical Slot Number per root port - Physical Slot Number per root port -**/ - UINT16 PegPhysicalSlotNumber[4]; - -/** Offset 0x0216 - Enable/Disable PavpEnable - Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable - $EN_DIS -**/ - UINT8 PavpEnable; - -/** Offset 0x0217 - CdClock Frequency selection - 0=168 Mhz, 1=336 Mhz, 2=528 Mhz, 3(Default)=675 Mhz - 0: 168 Mhz, 1: 336 Mhz, 2: 528 Mhz, 3: 675 Mhz -**/ - UINT8 CdClock; - -/** Offset 0x0218 - Enable/Disable PeiGraphicsPeimInit - Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit - $EN_DIS -**/ - UINT8 PeiGraphicsPeimInit; - -/** Offset 0x0219 -**/ - UINT8 UnusedUpdSpace7; - -/** Offset 0x021A - Enable or disable GNA device - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 GnaEnable; - -/** Offset 0x021B - State of X2APIC_OPT_OUT bit in the DMAR table - 0=Disable/Clear, 1=Enable/Set - $EN_DIS -**/ - UINT8 X2ApicOptOut; - -/** Offset 0x021C - Base addresses for VT-d function MMIO access - Base addresses for VT-d MMIO access per VT-d engine -**/ - UINT32 VtdBaseAddress[3]; - -/** Offset 0x0228 - Enable or disable eDP device - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortEdp; - -/** Offset 0x0229 - Enable or disable HPD of DDI port B - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortBHpd; - -/** Offset 0x022A - Enable or disable HPD of DDI port C - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortCHpd; - -/** Offset 0x022B - Enable or disable HPD of DDI port D - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortDHpd; - -/** Offset 0x022C - Enable or disable HPD of DDI port F - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortFHpd; - -/** Offset 0x022D - Enable or disable DDC of DDI port B - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortBDdc; - -/** Offset 0x022E - Enable or disable DDC of DDI port C - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortCDdc; - -/** Offset 0x022F - Enable or disable DDC of DDI port D - 0=Disable, 1(Default)=Enable - $EN_DIS -**/ - UINT8 DdiPortDDdc; - -/** Offset 0x0230 - Enable or disable DDC of DDI port F - 0(Default)=Disable, 1=Enable - $EN_DIS -**/ - UINT8 DdiPortFDdc; - -/** Offset 0x0231 - Enable/Disable SkipS3CdClockInit - Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full - CD clock in S3 resume due to GOP absent - $EN_DIS -**/ - UINT8 SkipS3CdClockInit; - -/** Offset 0x0232 - Delta T12 Power Cycle Delay required in ms - Select the value for delay required. 0(Default)= No delay, 0xFFFF = Auto calculate - T12 Delay to max 500ms - 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay -**/ - UINT16 DeltaT12PowerCycleDelay; - -/** Offset 0x0234 - Blt Buffer Address - Address of Blt buffer -**/ - UINT32 BltBufferAddress; - -/** Offset 0x0238 - Blt Buffer Size - Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of - EFI_GRAPHICS_OUTPUT_BLT_PIXEL) -**/ - UINT32 BltBufferSize; - -/** Offset 0x023C - SaPostMemProductionRsvd - Reserved for SA Post-Mem Production - $EN_DIS -**/ - UINT8 SaPostMemProductionRsvd[35]; - -/** Offset 0x025F - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable Workaround needed for - Alpine ridge -**/ - UINT8 PcieRootPortGen2PllL1CgDisable[24]; - -/** Offset 0x0277 - Advanced Encryption Standard (AES) feature - Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable - $EN_DIS -**/ - UINT8 AesEnable; - -/** Offset 0x0278 - Power State 3 enable/disable - PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>. - For all VR Indexes -**/ - UINT8 Psi3Enable[5]; - -/** Offset 0x027D - Power State 4 enable/disable - PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For - all VR Indexes -**/ - UINT8 Psi4Enable[5]; - -/** Offset 0x0282 - Imon slope correction - PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. - Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes -**/ - UINT8 ImonSlope[5]; - -/** Offset 0x0287 - Imon offset correction - PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. - Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b> -**/ - UINT8 ImonOffset[5]; - -/** Offset 0x028C - Enable/Disable BIOS configuration of VR - Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes -**/ - UINT8 VrConfigEnable[5]; - -/** Offset 0x0291 - Thermal Design Current enable/disable - PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1: - Enable.For all VR Indexes -**/ - UINT8 TdcEnable[5]; - -/** Offset 0x0296 - HECI3 state - PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. - Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - 6ms , 7 - 7ms - , 8 - 8ms , 10 - 10ms.For all VR Indexe -**/ - UINT8 TdcTimeWindow[5]; - -/** Offset 0x029B - Thermal Design Current Lock - PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For - all VR Indexes -**/ - UINT8 TdcLock[5]; - -/** Offset 0x02A0 - Platform Psys slope correction - PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in - 1/100 increment values. Range is 0-200. 125 = 1.25 -**/ - UINT8 PsysSlope; - -/** Offset 0x02A1 - Platform Psys offset correction - PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/4, - Range 0-255. Value of 100 = 100/4 = 25 offset -**/ - UINT8 PsysOffset; - -/** Offset 0x02A2 - Acoustic Noise Mitigation feature - Enable or Disable Acoustic Noise Mitigation feature. <b>0: Disabled</b>; 1: Enabled - $EN_DIS -**/ - UINT8 AcousticNoiseMitigation; - -/** Offset 0x02A3 - Disable Fast Slew Rate for Deep Package C States for VR IA domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. <b>0: False</b>; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableIa; - -/** Offset 0x02A4 - Slew Rate configuration for Deep Package C States for VR IA domain - Slew Rate configuration for Deep Package C States for VR IA domain based on Acoustic - Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForIa; - -/** Offset 0x02A5 - Slew Rate configuration for Deep Package C States for VR GT domain - Slew Rate configuration for Deep Package C States for VR GT domain based on Acoustic - Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForGt; - -/** Offset 0x02A6 - Slew Rate configuration for Deep Package C States for VR SA domain - Slew Rate configuration for Deep Package C States for VR SA domain based on Acoustic - Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForSa; - -/** Offset 0x02A7 - Thermal Design Current current limit - PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. - Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes -**/ - UINT16 TdcPowerLimit[5]; - -/** Offset 0x02B1 - AcLoadline - PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is - 0-6249. <b>Intel Recommended Defaults vary by domain and SKU. -**/ - UINT16 AcLoadline[5]; - -/** Offset 0x02BB -**/ - UINT8 UnusedUpdSpace8[10]; - -/** Offset 0x02C5 - DcLoadline - PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is - 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b> -**/ - UINT16 DcLoadline[5]; - -/** Offset 0x02CF - Power State 1 Threshold current - PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi1Threshold[5]; - -/** Offset 0x02D9 - Power State 2 Threshold current - PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi2Threshold[5]; - -/** Offset 0x02E3 - Power State 3 Threshold current - PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. -**/ - UINT16 Psi3Threshold[5]; - -/** Offset 0x02ED - Icc Max limit - PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A -**/ - UINT16 IccMax[5]; - -/** Offset 0x02F7 - VR Voltage Limit - PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV. -**/ - UINT16 VrVoltageLimit[5]; - -/** Offset 0x0301 - Disable Fast Slew Rate for Deep Package C States for VR GT domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. <b>0: False</b>; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableGt; - -/** Offset 0x0302 - Disable Fast Slew Rate for Deep Package C States for VR SA domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. <b>0: False</b>; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableSa; - -/** Offset 0x0303 - Enable VR specific mailbox command - VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A - VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific - command sent for PS4 exit issue. 11b - Reserved. - $EN_DIS -**/ - UINT8 SendVrMbxCmd; - -/** Offset 0x0304 - Reserved - Reserved -**/ - UINT8 Reserved2; - -/** Offset 0x0305 - Enable or Disable TXT - Enable or Disable TXT; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 TxtEnable; - -/** Offset 0x0306 -**/ - UINT8 UnusedUpdSpace9[6]; - -/** Offset 0x030C - Skip Multi-Processor Initialization - When this is skipped, boot loader must initialize processors before SilicionInit - API. </b>0: Initialize; <b>1: Skip - $EN_DIS -**/ - UINT8 SkipMpInit; - -/** Offset 0x030D - McIVR RFI Frequency Prefix - PCODE MMIO Mailbox: McIVR RFI Frequency Adjustment Prefix. <b>0: Plus (+)</b>; 1: - Minus (-). -**/ - UINT8 McivrRfiFrequencyPrefix; - -/** Offset 0x030E - McIVR RFI Frequency Adjustment - PCODE MMIO Mailbox: Adjust the RFI frequency relative to the nominal frequency in - increments of 100KHz. For subtraction, change McivrRfiFrequencyPrefix. <b>0: Auto</b>. -**/ - UINT8 McivrRfiFrequencyAdjust; - -/** Offset 0x030F - FIVR RFI Frequency - PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0: - Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock; - 0-1535 (Up to 153.5MHz) for 19MHz clock. -**/ - UINT16 FivrRfiFrequency; - -/** Offset 0x0311 - McIVR RFI Spread Spectrum - PCODE MMIO Mailbox: McIVR RFI Spread Spectrum. <b>0: 0%</b>; 1: +/- 0.5%; 2: +/- - 1%; 3: +/- 1.5%; 4: +/- 2%; 5: +/- 3%; 6: +/- 4%; 7: +/- 5%; 8: +/- 6%. -**/ - UINT8 McivrSpreadSpectrum; - -/** Offset 0x0312 - FIVR RFI Spread Spectrum - PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments. <b>0: 0%</b>; - Range: 0.0% to 10.0% (0-100). -**/ - UINT8 FivrSpreadSpectrum; - -/** Offset 0x0313 - Disable Fast Slew Rate for Deep Package C States for VR FIVR domain - Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation - feature enabled. <b>0: False</b>; 1: True - $EN_DIS -**/ - UINT8 FastPkgCRampDisableFivr; - -/** Offset 0x0314 - Slew Rate configuration for Deep Package C States for VR FIVR domain - Slew Rate configuration for Deep Package C States for VR FIVR domain based on Acoustic - Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 - 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 -**/ - UINT8 SlowSlewRateForFivr; - -/** Offset 0x0315 - CpuBistData - Pointer CPU BIST Data -**/ - UINT32 CpuBistData; - -/** Offset 0x0319 - Activates VR mailbox command for Intersil VR C-state issues. - Intersil VR mailbox command. <b>0 - no mailbox command sent.</b> 1 - VR mailbox - command sent for IA/GT rails only. 2 - VR mailbox command sent for IA/GT/SA rails. -**/ - UINT8 IslVrCmd; - -/** Offset 0x031A - Imon slope1 correction - PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. - Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes -**/ - UINT16 ImonSlope1[5]; - -/** Offset 0x0324 - CPU VR Power Delivery Design - Used to communicate the power delivery design capability of the board. This value - is an enum of the available power delivery segments that are defined in the Platform - Design Guide. -**/ - UINT32 VrPowerDeliveryDesign; - -/** Offset 0x0328 - ReservedCpuPostMemProduction - Reserved for CPU Post-Mem Production - $EN_DIS -**/ - UINT8 ReservedCpuPostMemProduction[1]; - -/** Offset 0x0329 -**/ - UINT8 UnusedUpdSpace10[29]; - -/** Offset 0x0346 - Enable DMI ASPM - Deprecated. - $EN_DIS -**/ - UINT8 PchDmiAspm; - -/** Offset 0x0347 - Enable Power Optimizer - Enable DMI Power Optimizer on PCH side. - $EN_DIS -**/ - UINT8 PchPwrOptEnable; - -/** Offset 0x0348 - PCH Flash Protection Ranges Write Enble - Write or erase is blocked by hardware. -**/ - UINT8 PchWriteProtectionEnable[5]; - -/** Offset 0x034D - PCH Flash Protection Ranges Read Enble - Read is blocked by hardware. -**/ - UINT8 PchReadProtectionEnable[5]; - -/** Offset 0x0352 - PCH Protect Range Limit - Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for - limit comparison. -**/ - UINT16 PchProtectedRangeLimit[5]; - -/** Offset 0x035C - PCH Protect Range Base - Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. -**/ - UINT16 PchProtectedRangeBase[5]; - -/** Offset 0x0366 - Enable Pme - Enable Azalia wake-on-ring. - $EN_DIS -**/ - UINT8 PchHdaPme; - -/** Offset 0x0367 -**/ - UINT8 UnusedUpdSpace11; - -/** Offset 0x0368 - VC Type - Virtual Channel Type Select: 0: VC0, 1: VC1. - 0: VC0, 1: VC1 -**/ - UINT8 PchHdaVcType; - -/** Offset 0x0369 - HD Audio Link Frequency - HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. - 0: 6MHz, 1: 12MHz, 2: 24MHz -**/ - UINT8 PchHdaLinkFrequency; - -/** Offset 0x036A - iDisp-Link Frequency - iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. - 4: 96MHz, 3: 48MHz -**/ - UINT8 PchHdaIDispLinkFrequency; - -/** Offset 0x036B - iDisp-Link T-mode - iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 1: 1T. - 0: 2T, 1: 1T -**/ - UINT8 PchHdaIDispLinkTmode; - -/** Offset 0x036C - Universal Audio Architecture compliance for DSP enabled system - 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox - driver or SST driver supported). - $EN_DIS -**/ - UINT8 PchHdaDspUaaCompliance; - -/** Offset 0x036D - iDisplay Audio Codec disconnection - 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. - $EN_DIS -**/ - UINT8 PchHdaIDispCodecDisconnect; - -/** Offset 0x036E -**/ - UINT8 UnusedUpdSpace12[15]; - -/** Offset 0x037D - Enable PCH Io Apic Entry 24-119 - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIoApicEntry24_119; - -/** Offset 0x037E - PCH Io Apic ID - This member determines IOAPIC ID. Default is 0x02. -**/ - UINT8 PchIoApicId; - -/** Offset 0x037F -**/ - UINT8 UnusedUpdSpace13; - -/** Offset 0x0380 - Enable PCH ISH SPI GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshSpiGpioAssign; - -/** Offset 0x0381 - Enable PCH ISH UART0 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshUart0GpioAssign; - -/** Offset 0x0382 - Enable PCH ISH UART1 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshUart1GpioAssign; - -/** Offset 0x0383 - Enable PCH ISH I2C0 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshI2c0GpioAssign; - -/** Offset 0x0384 - Enable PCH ISH I2C1 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshI2c1GpioAssign; - -/** Offset 0x0385 - Enable PCH ISH I2C2 GPIO pins assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshI2c2GpioAssign; - -/** Offset 0x0386 - Enable PCH ISH GP_0 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp0GpioAssign; - -/** Offset 0x0387 - Enable PCH ISH GP_1 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp1GpioAssign; - -/** Offset 0x0388 - Enable PCH ISH GP_2 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp2GpioAssign; - -/** Offset 0x0389 - Enable PCH ISH GP_3 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp3GpioAssign; - -/** Offset 0x038A - Enable PCH ISH GP_4 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp4GpioAssign; - -/** Offset 0x038B - Enable PCH ISH GP_5 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp5GpioAssign; - -/** Offset 0x038C - Enable PCH ISH GP_6 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp6GpioAssign; - -/** Offset 0x038D - Enable PCH ISH GP_7 GPIO pin assigned - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchIshGp7GpioAssign; - -/** Offset 0x038E - PCH ISH PDT Unlock Msg - 0: False; 1: True. - $EN_DIS -**/ - UINT8 PchIshPdtUnlock; - -/** Offset 0x038F - Enable PCH Lan LTR capabilty of PCH internal LAN - 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PchLanLtrEnable; - -/** Offset 0x0390 -**/ - UINT8 UnusedUpdSpace14[3]; - -/** Offset 0x0393 - Enable LOCKDOWN BIOS LOCK - Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region - protection. - $EN_DIS -**/ - UINT8 PchLockDownBiosLock; - -/** Offset 0x0394 - PCH Compatibility Revision ID - This member describes whether or not the CRID feature of PCH should be enabled. - $EN_DIS -**/ - UINT8 PchCrid; - -/** Offset 0x0395 - RTC CMOS MEMORY LOCK - Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper - and and lower 128-byte bank of RTC RAM. - $EN_DIS -**/ - UINT8 PchLockDownRtcMemoryLock; - -/** Offset 0x0396 - Enable PCIE RP HotPlug - Indicate whether the root port is hot plug available. -**/ - UINT8 PcieRpHotPlug[24]; - -/** Offset 0x03AE - Enable PCIE RP Pm Sci - Indicate whether the root port power manager SCI is enabled. -**/ - UINT8 PcieRpPmSci[24]; - -/** Offset 0x03C6 - Enable PCIE RP Ext Sync - Indicate whether the extended synch is enabled. -**/ - UINT8 PcieRpExtSync[24]; - -/** Offset 0x03DE - Enable PCIE RP Transmitter Half Swing - Indicate whether the Transmitter Half Swing is enabled. -**/ - UINT8 PcieRpTransmitterHalfSwing[24]; - -/** Offset 0x03F6 - Enable PCIE RP Clk Req Detect - Probe CLKREQ# signal before enabling CLKREQ# based power management. -**/ - UINT8 PcieRpClkReqDetect[24]; - -/** Offset 0x040E - PCIE RP Advanced Error Report - Indicate whether the Advanced Error Reporting is enabled. -**/ - UINT8 PcieRpAdvancedErrorReporting[24]; - -/** Offset 0x0426 - PCIE RP Unsupported Request Report - Indicate whether the Unsupported Request Report is enabled. -**/ - UINT8 PcieRpUnsupportedRequestReport[24]; - -/** Offset 0x043E - PCIE RP Fatal Error Report - Indicate whether the Fatal Error Report is enabled. -**/ - UINT8 PcieRpFatalErrorReport[24]; - -/** Offset 0x0456 - PCIE RP No Fatal Error Report - Indicate whether the No Fatal Error Report is enabled. -**/ - UINT8 PcieRpNoFatalErrorReport[24]; - -/** Offset 0x046E - PCIE RP Correctable Error Report - Indicate whether the Correctable Error Report is enabled. -**/ - UINT8 PcieRpCorrectableErrorReport[24]; - -/** Offset 0x0486 - PCIE RP System Error On Fatal Error - Indicate whether the System Error on Fatal Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnFatalError[24]; - -/** Offset 0x049E - PCIE RP System Error On Non Fatal Error - Indicate whether the System Error on Non Fatal Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnNonFatalError[24]; - -/** Offset 0x04B6 - PCIE RP System Error On Correctable Error - Indicate whether the System Error on Correctable Error is enabled. -**/ - UINT8 PcieRpSystemErrorOnCorrectableError[24]; - -/** Offset 0x04CE - PCIE RP Max Payload - Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. -**/ - UINT8 PcieRpMaxPayload[24]; - -/** Offset 0x04E6 -**/ - UINT8 UnusedUpdSpace15[24]; - -/** Offset 0x04FE - PCIE RP Pcie Speed - Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: - PCH_PCIE_SPEED). -**/ - UINT8 PcieRpPcieSpeed[24]; - -/** Offset 0x0516 - PCIE RP Gen3 Equalization Phase Method - PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; - 1: hardware equalization; 4: Fixed Coeficients. -**/ - UINT8 PcieRpGen3EqPh3Method[24]; - -/** Offset 0x052E - PCIE RP Physical Slot Number - Indicates the slot number for the root port. Default is the value as root port index. -**/ - UINT8 PcieRpPhysicalSlotNumber[24]; - -/** Offset 0x0546 - PCIE RP Completion Timeout - The root port completion timeout(see: PCH_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default. -**/ - UINT8 PcieRpCompletionTimeout[24]; - -/** Offset 0x055E -**/ - UINT8 UnusedUpdSpace16[106]; - -/** Offset 0x05C8 - PCIE RP Aspm - The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is - PchPcieAspmAutoConfig. -**/ - UINT8 PcieRpAspm[24]; - -/** Offset 0x05E0 - PCIE RP L1 Substates - The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). - Default is PchPcieL1SubstatesL1_1_2. -**/ - UINT8 PcieRpL1Substates[24]; - -/** Offset 0x05F8 - PCIE RP Ltr Enable - Latency Tolerance Reporting Mechanism. -**/ - UINT8 PcieRpLtrEnable[24]; - -/** Offset 0x0610 - PCIE RP Ltr Config Lock - 0: Disable; 1: Enable. -**/ - UINT8 PcieRpLtrConfigLock[24]; - -/** Offset 0x0628 - PCIE Eq Ph3 Lane Param Cm - PCH_PCIE_EQ_LANE_PARAM. Coefficient C-1. -**/ - UINT8 PcieEqPh3LaneParamCm[24]; - -/** Offset 0x0640 - PCIE Eq Ph3 Lane Param Cp - PCH_PCIE_EQ_LANE_PARAM. Coefficient C+1. -**/ - UINT8 PcieEqPh3LaneParamCp[24]; - -/** Offset 0x0658 - PCIE Sw Eq CoeffList Cm - PCH_PCIE_EQ_PARAM. Coefficient C-1. -**/ - UINT8 PcieSwEqCoeffListCm[5]; - -/** Offset 0x065D - PCIE Sw Eq CoeffList Cp - PCH_PCIE_EQ_PARAM. Coefficient C+1. -**/ - UINT8 PcieSwEqCoeffListCp[5]; - -/** Offset 0x0662 - PCIE Disable RootPort Clock Gating - Describes whether the PCI Express Clock Gating for each root port is enabled by - platform modules. 0: Disable; 1: Enable. - $EN_DIS -**/ - UINT8 PcieDisableRootPortClockGating; - -/** Offset 0x0663 - PCIE Enable Peer Memory Write - This member describes whether Peer Memory Writes are enabled on the platform. - $EN_DIS -**/ - UINT8 PcieEnablePeerMemoryWrite; - -/** Offset 0x0664 -**/ - UINT8 UnusedUpdSpace17; - -/** Offset 0x0665 - PCIE Compliance Test Mode - Compliance Test Mode shall be enabled when using Compliance Load Board. - $EN_DIS -**/ - UINT8 PcieComplianceTestMode; - -/** Offset 0x0666 - PCIE Rp Function Swap - Allows BIOS to use root port function number swapping when root port of function - 0 is disabled. - $EN_DIS -**/ - UINT8 PcieRpFunctionSwap; - -/** Offset 0x0667 -**/ - UINT8 UnusedUpdSpace18[2]; - -/** Offset 0x0669 - PCH Pm PME_B0_S5_DIS - When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. - $EN_DIS -**/ - UINT8 PchPmPmeB0S5Dis; - -/** Offset 0x066A - SPI ChipSelect signal polarity - Selects SPI ChipSelect signal polarity. -**/ - UINT8 SerialIoSpiCsPolarity[3]; - -/** Offset 0x066D - PCIE IMR - Enables Isolated Memory Region for PCIe. - $EN_DIS -**/ - UINT8 PcieRpImrEnabled; - -/** Offset 0x066E - PCIE IMR port number - Selects PCIE root port number for IMR feature. -**/ - UINT8 PcieRpImrSelection; - -/** Offset 0x066F -**/ - UINT8 UnusedUpdSpace19; - -/** Offset 0x0670 - PCH Pm Wol Enable Override - Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. - $EN_DIS -**/ - UINT8 PchPmWolEnableOverride; - -/** Offset 0x0671 - PCH Pm Pcie Wake From DeepSx - Determine if enable PCIe to wake from deep Sx. - $EN_DIS -**/ - UINT8 PchPmPcieWakeFromDeepSx; - -/** Offset 0x0672 - PCH Pm WoW lan Enable - Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. - $EN_DIS -**/ - UINT8 PchPmWoWlanEnable; - -/** Offset 0x0673 - PCH Pm WoW lan DeepSx Enable - Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the - PWRM_CFG3 register. - $EN_DIS -**/ - UINT8 PchPmWoWlanDeepSxEnable; - -/** Offset 0x0674 - PCH Pm Lan Wake From DeepSx - Determine if enable LAN to wake from deep Sx. - $EN_DIS -**/ - UINT8 PchPmLanWakeFromDeepSx; - -/** Offset 0x0675 - PCH Pm Deep Sx Pol - Deep Sx Policy. - $EN_DIS -**/ - UINT8 PchPmDeepSxPol; - -/** Offset 0x0676 - PCH Pm Slp S3 Min Assert - SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. -**/ - UINT8 PchPmSlpS3MinAssert; - -/** Offset 0x0677 - PCH Pm Slp S4 Min Assert - SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. -**/ - UINT8 PchPmSlpS4MinAssert; - -/** Offset 0x0678 - PCH Pm Slp Sus Min Assert - SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. -**/ - UINT8 PchPmSlpSusMinAssert; - -/** Offset 0x0679 - PCH Pm Slp A Min Assert - SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. -**/ - UINT8 PchPmSlpAMinAssert; - -/** Offset 0x067A - SLP_S0# Override - Select 'Auto', it will be auto-configured according to probe type. Select 'Enabled' - will disable SLP_S0# assertion whereas 'Disabled' will enable SLP_S0# assertion - when debug is enabled. \n - Note: This BIOS option should keep 'Auto', other options are intended for advanced - configuration only. - 0:Disabled, 1:Enabled, 2:Auto -**/ - UINT8 SlpS0Override; - -/** Offset 0x067B - S0ix Override Settings - Select 'Auto', it will be auto-configured according to probe type. 'No Change' will - keep PMC default settings. Or select the desired debug probe type for S0ix Override - settings.\n - Reminder: DCI OOB (aka BSSB) uses CCA probe.\n - Note: This BIOS option should keep 'Auto', other options are intended for advanced - configuration only. - 0:No Change, 1:DCI OOB, 2:USB2 DbC, 3:Auto -**/ - UINT8 SlpS0DisQForDebug; - -/** Offset 0x067C - USB Overcurrent Override for DbC - This option overrides USB Over Current enablement state that USB OC will be disabled - after enabling this option. Enable when DbC is used to avoid signaling conflicts. - $EN_DIS -**/ - UINT8 PchEnableDbcObs; - -/** Offset 0x067D -**/ - UINT8 UnusedUpdSpace20[3]; - -/** Offset 0x0680 - PCH Pm Lpc Clock Run - This member describes whether or not the LPC ClockRun feature of PCH should be enabled. - Default value is Disabled - $EN_DIS -**/ - UINT8 PchPmLpcClockRun; - -/** Offset 0x0681 - PCH Pm Slp Strch Sus Up - Enable SLP_X Stretching After SUS Well Power Up. - $EN_DIS -**/ - UINT8 PchPmSlpStrchSusUp; - -/** Offset 0x0682 - PCH Pm Slp Lan Low Dc - Enable/Disable SLP_LAN# Low on DC Power. - $EN_DIS -**/ - UINT8 PchPmSlpLanLowDc; - -/** Offset 0x0683 - PCH Pm Pwr Btn Override Period - PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. -**/ - UINT8 PchPmPwrBtnOverridePeriod; - -/** Offset 0x0684 - PCH Pm Disable Dsx Ac Present Pulldown - When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. - $EN_DIS -**/ - UINT8 PchPmDisableDsxAcPresentPulldown; - -/** Offset 0x0685 -**/ - UINT8 UnusedUpdSpace21; - -/** Offset 0x0686 - PCH Pm Disable Native Power Button - Power button native mode disable. - $EN_DIS -**/ - UINT8 PchPmDisableNativePowerButton; - -/** Offset 0x0687 - PCH Pm Slp S0 Enable - Indicates whether SLP_S0# is to be asserted when PCH reaches idle state. - $EN_DIS -**/ - UINT8 PchPmSlpS0Enable; - -/** Offset 0x0688 - PCH Pm ME_WAKE_STS - Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. - $EN_DIS -**/ - UINT8 PchPmMeWakeSts; - -/** Offset 0x0689 - PCH Pm WOL_OVR_WK_STS - Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. - $EN_DIS -**/ - UINT8 PchPmWolOvrWkSts; - -/** Offset 0x068A - PCH Pm Reset Power Cycle Duration - Could be customized in the unit of second. Please refer to EDS for all support settings. - 0 is default, 1 is 1 second, 2 is 2 seconds, ... -**/ - UINT8 PchPmPwrCycDur; - -/** Offset 0x068B - PCH Pm Pcie Pll Ssc - Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No - BIOS override. -**/ - UINT8 PchPmPciePllSsc; - -/** Offset 0x068C -**/ - UINT8 UnusedUpdSpace22; - -/** Offset 0x068D - PCH Sata Pwr Opt Enable - SATA Power Optimizer on PCH side. - $EN_DIS -**/ - UINT8 SataPwrOptEnable; - -/** Offset 0x068E - PCH Sata eSATA Speed Limit - When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. - $EN_DIS -**/ - UINT8 EsataSpeedLimit; - -/** Offset 0x068F - PCH Sata Speed Limit - Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. -**/ - UINT8 SataSpeedLimit; - -/** Offset 0x0690 - Enable SATA Port HotPlug - Enable SATA Port HotPlug. -**/ - UINT8 SataPortsHotPlug[8]; - -/** Offset 0x0698 - Enable SATA Port Interlock Sw - Enable SATA Port Interlock Sw. -**/ - UINT8 SataPortsInterlockSw[8]; - -/** Offset 0x06A0 - Enable SATA Port External - Enable SATA Port External. -**/ - UINT8 SataPortsExternal[8]; - -/** Offset 0x06A8 - Enable SATA Port SpinUp - Enable the COMRESET initialization Sequence to the device. -**/ - UINT8 SataPortsSpinUp[8]; - -/** Offset 0x06B0 - Enable SATA Port Solid State Drive - 0: HDD; 1: SSD. -**/ - UINT8 SataPortsSolidStateDrive[8]; - -/** Offset 0x06B8 - Enable SATA Port Enable Dito Config - Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). -**/ - UINT8 SataPortsEnableDitoConfig[8]; - -/** Offset 0x06C0 - Enable SATA Port DmVal - DITO multiplier. Default is 15. -**/ - UINT8 SataPortsDmVal[8]; - -/** Offset 0x06C8 - Enable SATA Port DmVal - DEVSLP Idle Timeout (DITO), Default is 625. -**/ - UINT16 SataPortsDitoVal[8]; - -/** Offset 0x06D8 - Enable SATA Port ZpOdd - Support zero power ODD. -**/ - UINT8 SataPortsZpOdd[8]; - -/** Offset 0x06E0 - PCH Sata Rst Raid Device Id - Enable RAID Alternate ID. - 0:Client, 1:Alternate, 2:Server -**/ - UINT8 SataRstRaidDeviceId; - -/** Offset 0x06E1 - PCH Sata Rst Raid0 - RAID0. - $EN_DIS -**/ - UINT8 SataRstRaid0; - -/** Offset 0x06E2 - PCH Sata Rst Raid1 - RAID1. - $EN_DIS -**/ - UINT8 SataRstRaid1; - -/** Offset 0x06E3 - PCH Sata Rst Raid10 - RAID10. - $EN_DIS -**/ - UINT8 SataRstRaid10; - -/** Offset 0x06E4 - PCH Sata Rst Raid5 - RAID5. - $EN_DIS -**/ - UINT8 SataRstRaid5; - -/** Offset 0x06E5 - PCH Sata Rst Irrt - Intel Rapid Recovery Technology. - $EN_DIS -**/ - UINT8 SataRstIrrt; - -/** Offset 0x06E6 - PCH Sata Rst Orom Ui Banner - OROM UI and BANNER. - $EN_DIS -**/ - UINT8 SataRstOromUiBanner; - -/** Offset 0x06E7 - PCH Sata Rst Orom Ui Delay - 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). -**/ - UINT8 SataRstOromUiDelay; - -/** Offset 0x06E8 - PCH Sata Rst Hdd Unlock - Indicates that the HDD password unlock in the OS is enabled. - $EN_DIS -**/ - UINT8 SataRstHddUnlock; - -/** Offset 0x06E9 - PCH Sata Rst Led Locate - Indicates that the LED/SGPIO hardware is attached and ping to locate feature is - enabled on the OS. - $EN_DIS -**/ - UINT8 SataRstLedLocate; - -/** Offset 0x06EA - PCH Sata Rst Irrt Only - Allow only IRRT drives to span internal and external ports. - $EN_DIS -**/ - UINT8 SataRstIrrtOnly; - -/** Offset 0x06EB - PCH Sata Rst Smart Storage - RST Smart Storage caching Bit. - $EN_DIS -**/ - UINT8 SataRstSmartStorage; - -/** Offset 0x06EC - PCH Sata Rst Pcie Storage Remap enable - Enable Intel RST for PCIe Storage remapping. -**/ - UINT8 SataRstPcieEnable[3]; - -/** Offset 0x06EF - PCH Sata Rst Pcie Storage Port - Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). -**/ - UINT8 SataRstPcieStoragePort[3]; - -/** Offset 0x06F2 - PCH Sata Rst Pcie Device Reset Delay - PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms -**/ - UINT8 SataRstPcieDeviceResetDelay[3]; - -/** Offset 0x06F5 - Enable eMMC HS400 Training - Deprecated. - $EN_DIS -**/ - UINT8 PchScsEmmcHs400TuningRequired; - -/** Offset 0x06F6 - Set HS400 Tuning Data Valid - Set if HS400 Tuning Data Valid. - $EN_DIS -**/ - UINT8 PchScsEmmcHs400DllDataValid; - -/** Offset 0x06F7 - Rx Strobe Delay Control - Rx Strobe Delay Control - Rx Strobe Delay DLL 1 (HS400 Mode). -**/ - UINT8 PchScsEmmcHs400RxStrobeDll1; - -/** Offset 0x06F8 - Tx Data Delay Control - Tx Data Delay Control 1 - Tx Data Delay (HS400 Mode). -**/ - UINT8 PchScsEmmcHs400TxDataDll; - -/** Offset 0x06F9 - I/O Driver Strength - Deprecated. - 0:33 Ohm, 1:40 Ohm, 2:50 Ohm -**/ - UINT8 PchScsEmmcHs400DriverStrength; - -/** Offset 0x06FA - PCH SerialIo I2C Pads Termination - 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, - 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5 - pads termination respectively. One byte for each controller, byte0 for I2C0, byte1 - for I2C1, and so on. -**/ - UINT8 PchSerialIoI2cPadsTermination[6]; - -/** Offset 0x0700 -**/ - UINT8 UnusedUpdSpace23; - -/** Offset 0x0701 - PcdSerialIoUart0PinMuxing - Select SerialIo Uart0 pin muxing. Setting applicable only if SerialIO UART0 is enabled. - 0:default pins, 1:pins muxed with CNV_BRI/RGI -**/ - UINT8 SerialIoUart0PinMuxing; - -/** Offset 0x0702 -**/ - UINT8 UnusedUpdSpace24[1]; - -/** Offset 0x0703 - Enables UART hardware flow control, CTS and RTS lines - Enables UART hardware flow control, CTS and RTS linesh. -**/ - UINT8 SerialIoUartHwFlowCtrl[3]; - -/** Offset 0x0706 - UART Number For Debug Purpose - UART number for debug purpose. 0:UART0, 1: UART1, 2:UART2. Note: If UART0 is selected - as CNVi BT Core interface, it cannot be used for debug purpose. - 0:UART0, 1:UART1, 2:UART2 -**/ - UINT8 SerialIoDebugUartNumber; - -/** Offset 0x0707 - Enable Debug UART Controller - Enable debug UART controller after post. - $EN_DIS -**/ - UINT8 SerialIoEnableDebugUartAfterPost; - -/** Offset 0x0708 - Enable Serial IRQ - Determines if enable Serial IRQ. - $EN_DIS -**/ - UINT8 PchSirqEnable; - -/** Offset 0x0709 - Serial IRQ Mode Select - Serial IRQ Mode Select, 0: quiet mode, 1: continuous mode. - $EN_DIS -**/ - UINT8 PchSirqMode; - -/** Offset 0x070A - Start Frame Pulse Width - Start Frame Pulse Width, 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk. - 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk -**/ - UINT8 PchStartFramePulse; - -/** Offset 0x070B - Reserved - Reserved - $EN_DIS -**/ - UINT8 ReservedForFuture1; - -/** Offset 0x070C - Thermal Device SMI Enable - This locks down SMI Enable on Alert Thermal Sensor Trip. - $EN_DIS -**/ - UINT8 PchTsmicLock; - -/** Offset 0x070D - Thermal Throttling Custimized T0Level Value - Custimized T0Level value. -**/ - UINT16 PchT0Level; - -/** Offset 0x070F - Thermal Throttling Custimized T1Level Value - Custimized T1Level value. -**/ - UINT16 PchT1Level; - -/** Offset 0x0711 - Thermal Throttling Custimized T2Level Value - Custimized T2Level value. -**/ - UINT16 PchT2Level; - -/** Offset 0x0713 - Enable The Thermal Throttle - Enable the thermal throttle function. - $EN_DIS -**/ - UINT8 PchTTEnable; - -/** Offset 0x0714 - PMSync State 13 - When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force - at least T2 state. - $EN_DIS -**/ - UINT8 PchTTState13Enable; - -/** Offset 0x0715 - Thermal Throttle Lock - Thermal Throttle Lock. - $EN_DIS -**/ - UINT8 PchTTLock; - -/** Offset 0x0716 - Thermal Throttling Suggested Setting - Thermal Throttling Suggested Setting. - $EN_DIS -**/ - UINT8 TTSuggestedSetting; - -/** Offset 0x0717 - Enable PCH Cross Throttling - Enable/Disable PCH Cross Throttling - $EN_DIS -**/ - UINT8 TTCrossThrottling; - -/** Offset 0x0718 - DMI Thermal Sensor Autonomous Width Enable - DMI Thermal Sensor Autonomous Width Enable. - $EN_DIS -**/ - UINT8 PchDmiTsawEn; - -/** Offset 0x0719 - DMI Thermal Sensor Suggested Setting - DMT thermal sensor suggested representative values. - $EN_DIS -**/ - UINT8 DmiSuggestedSetting; - -/** Offset 0x071A - Thermal Sensor 0 Target Width - DMT thermal sensor suggested representative values. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS0TW; - -/** Offset 0x071B - Thermal Sensor 1 Target Width - Thermal Sensor 1 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS1TW; - -/** Offset 0x071C - Thermal Sensor 2 Target Width - Thermal Sensor 2 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS2TW; - -/** Offset 0x071D - Thermal Sensor 3 Target Width - Thermal Sensor 3 Target Width. - 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 -**/ - UINT8 DmiTS3TW; - -/** Offset 0x071E - Port 0 T1 Multipler - Port 0 T1 Multipler. -**/ - UINT8 SataP0T1M; - -/** Offset 0x071F - Port 0 T2 Multipler - Port 0 T2 Multipler. -**/ - UINT8 SataP0T2M; - -/** Offset 0x0720 - Port 0 T3 Multipler - Port 0 T3 Multipler. -**/ - UINT8 SataP0T3M; - -/** Offset 0x0721 - Port 0 Tdispatch - Port 0 Tdispatch. -**/ - UINT8 SataP0TDisp; - -/** Offset 0x0722 - Port 1 T1 Multipler - Port 1 T1 Multipler. -**/ - UINT8 SataP1T1M; - -/** Offset 0x0723 - Port 1 T2 Multipler - Port 1 T2 Multipler. -**/ - UINT8 SataP1T2M; - -/** Offset 0x0724 - Port 1 T3 Multipler - Port 1 T3 Multipler. -**/ - UINT8 SataP1T3M; - -/** Offset 0x0725 - Port 1 Tdispatch - Port 1 Tdispatch. -**/ - UINT8 SataP1TDisp; - -/** Offset 0x0726 - Port 0 Tinactive - Port 0 Tinactive. -**/ - UINT8 SataP0Tinact; - -/** Offset 0x0727 - Port 0 Alternate Fast Init Tdispatch - Port 0 Alternate Fast Init Tdispatch. - $EN_DIS -**/ - UINT8 SataP0TDispFinit; - -/** Offset 0x0728 - Port 1 Tinactive - Port 1 Tinactive. -**/ - UINT8 SataP1Tinact; - -/** Offset 0x0729 - Port 1 Alternate Fast Init Tdispatch - Port 1 Alternate Fast Init Tdispatch. - $EN_DIS -**/ - UINT8 SataP1TDispFinit; - -/** Offset 0x072A - Sata Thermal Throttling Suggested Setting - Sata Thermal Throttling Suggested Setting. - $EN_DIS -**/ - UINT8 SataThermalSuggestedSetting; - -/** Offset 0x072B - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. - $EN_DIS -**/ - UINT8 PchMemoryThrottlingEnable; - -/** Offset 0x072C - Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryPmsyncEnable[2]; - -/** Offset 0x072E - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryC0TransmitEnable[2]; - -/** Offset 0x0730 - Enable Memory Thermal Throttling - Enable Memory Thermal Throttling. -**/ - UINT8 PchMemoryPinSelection[2]; - -/** Offset 0x0732 - Thermal Device Temperature - Decides the temperature. -**/ - UINT16 PchTemperatureHotLevel; - -/** Offset 0x0734 - Enable xHCI Compliance Mode - Compliance Mode can be enabled for testing through this option but this is disabled - by default. - $EN_DIS -**/ - UINT8 PchEnableComplianceMode; - -/** Offset 0x0735 - USB2 Port Over Current Pin - Describe the specific over current pin number of USB 2.0 Port N. -**/ - UINT8 Usb2OverCurrentPin[16]; - -/** Offset 0x0745 - USB3 Port Over Current Pin - Describe the specific over current pin number of USB 3.0 Port N. -**/ - UINT8 Usb3OverCurrentPin[10]; - -/** Offset 0x074F - Enable 8254 Static Clock Gating - Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time - might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support - boot legacy OS using 8254 timer. Also enable this while S0ix is enabled. - $EN_DIS -**/ - UINT8 Enable8254ClockGating; - -/** Offset 0x0750 - PCH Sata Rst Optane Memory - Optane Memory - $EN_DIS -**/ - UINT8 SataRstOptaneMemory; - -/** Offset 0x0751 - PCH Sata Rst CPU Attached Storage - CPU Attached Storage - $EN_DIS -**/ - UINT8 SataRstCpuAttachedStorage; - -/** Offset 0x0752 -**/ - UINT8 UnusedUpdSpace25[2]; - -/** Offset 0x0754 - Pch PCIE device override table pointer - The PCIe device table is being used to override PCIe device ASPM settings. This - is a pointer points to a 32bit address. And it's only used in PostMem phase. Please - refer to PCH_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId - must be 0. -**/ - UINT32 PchPcieDeviceOverrideTablePtr; - -/** Offset 0x0758 - Enable TCO timer. - When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have - huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer - emulation must be enabled, and WDAT table must not be exposed to the OS. - $EN_DIS -**/ - UINT8 EnableTcoTimer; - -/** Offset 0x0759 - BgpdtHash[4] - BgpdtHash values -**/ - UINT64 BgpdtHash[4]; - -/** Offset 0x0779 - BiosGuardAttr - BiosGuardAttr default values -**/ - UINT32 BiosGuardAttr; - -/** Offset 0x077D - BiosGuardModulePtr - BiosGuardModulePtr default values -**/ - UINT64 BiosGuardModulePtr; - -/** Offset 0x0785 - SendEcCmd - SendEcCmd function pointer. \n - @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE - EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode -**/ - UINT64 SendEcCmd; - -/** Offset 0x078D - EcCmdProvisionEav - Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC -**/ - UINT8 EcCmdProvisionEav; - -/** Offset 0x078E - EcCmdLock - EcCmdLock default values. Locks Ephemeral Authorization Value sent previously -**/ - UINT8 EcCmdLock; - -/** Offset 0x078F - SgxEpoch0 - SgxEpoch0 default values -**/ - UINT64 SgxEpoch0; - -/** Offset 0x0797 - SgxEpoch1 - SgxEpoch1 default values -**/ - UINT64 SgxEpoch1; - -/** Offset 0x079F - SgxSinitNvsData - SgxSinitNvsData default values -**/ - UINT8 SgxSinitNvsData; - -/** Offset 0x07A0 - Si Config CSM Flag. - Platform specific common policies that used by several silicon components. CSM status flag. - $EN_DIS -**/ - UINT8 SiCsmFlag; - -/** Offset 0x07A1 -**/ - UINT32 SiSsidTablePtr; - -/** Offset 0x07A5 -**/ - UINT16 SiNumberOfSsidTableEntry; - -/** Offset 0x07A7 - SATA RST Interrupt Mode - Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. - 0:Msix, 1:Msi, 2:Legacy -**/ - UINT8 SataRstInterrupt; - -/** Offset 0x07A8 - ME Unconfig on RTC clear - 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>. - 2: Cmos is clear, status unkonwn. 3: Reserved - 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos - is clear, 3: Reserved -**/ - UINT8 MeUnconfigOnRtcClear; - -/** Offset 0x07A9 - Enable PS_ON. - PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power - target that will be required by the California Energy Commission (CEC). When FALSE, - PS_ON is to be disabled. - $EN_DIS -**/ - UINT8 PsOnEnable; - -/** Offset 0x07AA - Pmc Cpu C10 Gate Pin Enable - Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO - and VccSTG rails instead of SLP_S0# pin. - $EN_DIS -**/ - UINT8 PmcCpuC10GatePinEnable; - -/** Offset 0x07AB - Pch Dmi Aspm Ctrl - ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b> - 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto -**/ - UINT8 PchDmiAspmCtrl; - -/** Offset 0x07AC -**/ - UINT8 ReservedFspsUpd[1]; -} FSP_S_CONFIG; - -/** Fsp S Test Configuration -**/ -typedef struct { - -/** Offset 0x07AD -**/ - UINT32 Signature; - -/** Offset 0x07B1 - Enable/Disable Device 7 - Enable: Device 7 enabled, Disable (Default): Device 7 disabled - $EN_DIS -**/ - UINT8 ChapDeviceEnable; - -/** Offset 0x07B2 - Skip PAM register lock - Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): - PAM registers will be locked by RC - $EN_DIS -**/ - UINT8 SkipPamLock; - -/** Offset 0x07B3 - EDRAM Test Mode - Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): - PAM registers will be locked by RC - 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode -**/ - UINT8 EdramTestMode; - -/** Offset 0x07B4 - DMI Extended Sync Control - Enable: Enable DMI Extended Sync Control, Disable(Default): Disable DMI Extended - Sync Control - $EN_DIS -**/ - UINT8 DmiExtSync; - -/** Offset 0x07B5 - DMI IOT Control - Enable: Enable DMI IOT Control, Disable(Default): Disable DMI IOT Control - $EN_DIS -**/ - UINT8 DmiIot; - -/** Offset 0x07B6 - PEG Max Payload size per root port - 0xFF(Default):Auto, 0x1: Force 128B, 0x2: Force 256B - 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B -**/ - UINT8 PegMaxPayload[4]; - -/** Offset 0x07BA - Enable/Disable IGFX RenderStandby - Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby - $EN_DIS -**/ - UINT8 RenderStandby; - -/** Offset 0x07BB - Enable/Disable IGFX PmSupport - Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport - $EN_DIS -**/ - UINT8 PmSupport; - -/** Offset 0x07BC - Enable/Disable CdynmaxClamp - Enable(Default): Enable CdynmaxClamp, Disable: Disable CdynmaxClamp - $EN_DIS -**/ - UINT8 CdynmaxClampEnable; - -/** Offset 0x07BD - Disable VT-d - 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) - $EN_DIS -**/ - UINT8 VtdDisable; - -/** Offset 0x07BE - GT Frequency Limit - 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, - 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: - 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, - 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, - 0x18: 1200 Mhz - 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, - 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: - 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, - 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, - 0x18: 1200 Mhz -**/ - UINT8 GtFreqMax; - -/** Offset 0x07BF - Disable Turbo GT - 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency - $EN_DIS -**/ - UINT8 DisableTurboGt; - -/** Offset 0x07C0 - SaPostMemTestRsvd - Reserved for SA Post-Mem Test - $EN_DIS -**/ - UINT8 SaPostMemTestRsvd[11]; - -/** Offset 0x07CB - 1-Core Ratio Limit - 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal - to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit, 5-Core Ratio Limit, - 6-Core Ratio Limit, 7-Core Ratio Limit, 8-Core Ratio Limit. Range is 0 to 83 -**/ - UINT8 OneCoreRatioLimit; - -/** Offset 0x07CC - 2-Core Ratio Limit - 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 -**/ - UINT8 TwoCoreRatioLimit; - -/** Offset 0x07CD - 3-Core Ratio Limit - 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 -**/ - UINT8 ThreeCoreRatioLimit; - -/** Offset 0x07CE - 4-Core Ratio Limit - 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 -**/ - UINT8 FourCoreRatioLimit; - -/** Offset 0x07CF - Enable or Disable HWP - Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b> - 2-3:Reserved - $EN_DIS -**/ - UINT8 Hwp; - -/** Offset 0x07D0 - Hardware Duty Cycle Control - Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved - $EN_DIS -**/ - UINT8 HdcControl; - -/** Offset 0x07D1 - Package Long duration turbo mode time - Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds) - 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 -**/ - UINT8 PowerLimit1Time; - -/** Offset 0x07D2 - Short Duration Turbo Mode - Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 PowerLimit2; - -/** Offset 0x07D3 - Turbo settings Lock - Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable - $EN_DIS -**/ - UINT8 TurboPowerLimitLock; - -/** Offset 0x07D4 - Package PL3 time window - Package PL3 time window range for this policy from 0 to 64ms -**/ - UINT8 PowerLimit3Time; - -/** Offset 0x07D5 - Package PL3 Duty Cycle - Package PL3 Duty Cycle; Valid Range is 0 to 100 -**/ - UINT8 PowerLimit3DutyCycle; - -/** Offset 0x07D6 - Package PL3 Lock - Package PL3 Lock Enable/Disable; <b>0: Disable ; <b> 1: Enable - $EN_DIS -**/ - UINT8 PowerLimit3Lock; - -/** Offset 0x07D7 - Package PL4 Lock - Package PL4 Lock Enable/Disable; <b>0: Disable ; <b>1: Enable - $EN_DIS -**/ - UINT8 PowerLimit4Lock; - -/** Offset 0x07D8 - TCC Activation Offset - TCC Activation Offset. Offset from factory set TCC activation temperature at which - the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation - Temperature, in volts.For Y SKU, the recommended default for this policy is <b>10</b>, - For all other SKUs the recommended default are <b>0</b> -**/ - UINT8 TccActivationOffset; - -/** Offset 0x07D9 - Tcc Offset Clamp Enable/Disable - Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle - below P1.For Y SKU, the recommended default for this policy is <b>1: Enabled</b>, - For all other SKUs the recommended default are <b>0: Disabled</b>. - $EN_DIS -**/ - UINT8 TccOffsetClamp; - -/** Offset 0x07DA - Tcc Offset Lock - Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature - target; 0: Disabled; <b>1: Enabled </b>. - $EN_DIS -**/ - UINT8 TccOffsetLock; - -/** Offset 0x07DB - Custom Ratio State Entries - The number of custom ratio state entries, ranges from 0 to 40 for a valid custom - ratio table.Sets the number of custom P-states. At least 2 states must be present -**/ - UINT8 NumberOfEntries; - -/** Offset 0x07DC - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128 -**/ - UINT8 Custom1PowerLimit1Time; - -/** Offset 0x07DD - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 -**/ - UINT8 Custom1TurboActivationRatio; - -/** Offset 0x07DE - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom1ConfigTdpControl; - -/** Offset 0x07DF - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128 -**/ - UINT8 Custom2PowerLimit1Time; - -/** Offset 0x07E0 - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 -**/ - UINT8 Custom2TurboActivationRatio; - -/** Offset 0x07E1 - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom2ConfigTdpControl; - -/** Offset 0x07E2 - Custom Short term Power Limit time window - Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128 -**/ - UINT8 Custom3PowerLimit1Time; - -/** Offset 0x07E3 - Custom Turbo Activation Ratio - Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 -**/ - UINT8 Custom3TurboActivationRatio; - -/** Offset 0x07E4 - Custom Config Tdp Control - Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 -**/ - UINT8 Custom3ConfigTdpControl; - -/** Offset 0x07E5 - ConfigTdp mode settings Lock - Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 ConfigTdpLock; - -/** Offset 0x07E6 - Load Configurable TDP SSDT - Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 ConfigTdpBios; - -/** Offset 0x07E7 - PL1 Enable value - PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 PsysPowerLimit1; - -/** Offset 0x07E8 - PL1 timewindow - PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16 - , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 -**/ - UINT8 PsysPowerLimit1Time; - -/** Offset 0x07E9 - PL2 Enable Value - PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>; - 1: Enable. - $EN_DIS -**/ - UINT8 PsysPowerLimit2; - -/** Offset 0x07EA - Enable or Disable MLC Streamer Prefetcher - Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 MlcStreamerPrefetcher; - -/** Offset 0x07EB - Enable or Disable MLC Spatial Prefetcher - Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 MlcSpatialPrefetcher; - -/** Offset 0x07EC - Enable or Disable Monitor /MWAIT instructions - Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 MonitorMwaitEnable; - -/** Offset 0x07ED - Enable or Disable initialization of machine check registers - Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 MachineCheckEnable; - -/** Offset 0x07EE - Enable or Disable processor debug features - Enable or Disable processor debug features; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 DebugInterfaceEnable; - -/** Offset 0x07EF - Lock or Unlock debug interface features - Lock or Unlock debug interface features; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 DebugInterfaceLockEnable; - -/** Offset 0x07F0 - AP Idle Manner of waiting for SIPI - AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop. - 1: HALT loop, 2: MWAIT loop, 3: RUN loop -**/ - UINT8 ApIdleManner; - -/** Offset 0x07F1 - Control on Processor Trace output scheme - Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output. - 0: Single Range Output, 1: ToPA Output -**/ - UINT8 ProcessorTraceOutputScheme; - -/** Offset 0x07F2 - Enable or Disable Processor Trace feature - Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 ProcessorTraceEnable; - -/** Offset 0x07F3 - Base of memory region allocated for Processor Trace - Base address of memory region allocated for Processor Trace. Processor Trace requires - 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> -**/ - UINT64 ProcessorTraceMemBase; - -/** Offset 0x07FB - Memory region allocation for Processor Trace - Length in bytes of memory region allocated for Processor Trace. Processor Trace - requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> -**/ - UINT32 ProcessorTraceMemLength; - -/** Offset 0x07FF - Enable or Disable Voltage Optimization feature - Enable or Disable Voltage Optimization feature 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 VoltageOptimization; - -/** Offset 0x0800 - Enable or Disable Intel SpeedStep Technology - Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 Eist; - -/** Offset 0x0801 - Enable or Disable Energy Efficient P-state - Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; - <b>1: Enable</b> - $EN_DIS -**/ - UINT8 EnergyEfficientPState; - -/** Offset 0x0802 - Enable or Disable Energy Efficient Turbo - Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; - <b>1: Enable</b> - $EN_DIS -**/ - UINT8 EnergyEfficientTurbo; - -/** Offset 0x0803 - Enable or Disable T states - Enable or Disable T states; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 TStates; - -/** Offset 0x0804 - Enable or Disable Bi-Directional PROCHOT# - Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 BiProcHot; - -/** Offset 0x0805 - Enable or Disable PROCHOT# signal being driven externally - Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 DisableProcHotOut; - -/** Offset 0x0806 - Enable or Disable PROCHOT# Response - Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 ProcHotResponse; - -/** Offset 0x0807 - Enable or Disable VR Thermal Alert - Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 DisableVrThermalAlert; - -/** Offset 0x0808 - Enable or Disable Thermal Reporting - Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 AutoThermalReporting; - -/** Offset 0x0809 - Enable or Disable Thermal Monitor - Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 ThermalMonitor; - -/** Offset 0x080A - Enable or Disable CPU power states (C-states) - Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 Cx; - -/** Offset 0x080B - Configure C-State Configuration Lock - Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>. - $EN_DIS -**/ - UINT8 PmgCstCfgCtrlLock; - -/** Offset 0x080C - Enable or Disable Enhanced C-states - Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 C1e; - -/** Offset 0x080D - Enable or Disable Package Cstate Demotion - Enable or Disable Package Cstate Demotion. <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 PkgCStateDemotion; - -/** Offset 0x080E - Enable or Disable Package Cstate UnDemotion - Enable or Disable Package Cstate UnDemotion. <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 PkgCStateUnDemotion; - -/** Offset 0x080F - Enable or Disable CState-Pre wake - Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 CStatePreWake; - -/** Offset 0x0810 - Enable or Disable TimedMwait Support. - Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 TimedMwait; - -/** Offset 0x0811 - Enable or Disable IO to MWAIT redirection - Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 CstCfgCtrIoMwaitRedirection; - -/** Offset 0x0812 - Set the Max Pkg Cstate - Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep - C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , - 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto -**/ - UINT8 PkgCStateLimit; - -/** Offset 0x0813 - TimeUnit for C-State Latency Control0 - TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl0TimeUnit; - -/** Offset 0x0814 - TimeUnit for C-State Latency Control1 - TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl1TimeUnit; - -/** Offset 0x0815 - TimeUnit for C-State Latency Control2 - TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl2TimeUnit; - -/** Offset 0x0816 - TimeUnit for C-State Latency Control3 - TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl3TimeUnit; - -/** Offset 0x0817 - TimeUnit for C-State Latency Control4 - Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl4TimeUnit; - -/** Offset 0x0818 - TimeUnit for C-State Latency Control5 - TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns - , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns -**/ - UINT8 CstateLatencyControl5TimeUnit; - -/** Offset 0x0819 - Interrupt Redirection Mode Select - Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;4: - PAIR with fixed priority;5: PAIR with round robin;6: PAIR with hash vector;7: No change. -**/ - UINT8 PpmIrmSetting; - -/** Offset 0x081A - Lock prochot configuration - Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable - $EN_DIS -**/ - UINT8 ProcHotLock; - -/** Offset 0x081B - Configuration for boot TDP selection - Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP - Up;0xFF : Deactivate -**/ - UINT8 ConfigTdpLevel; - -/** Offset 0x081C - Race To Halt - Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency - in order to enter pkg C-State faster to reduce overall power. (RTH is controlled - through MSR 1FC bit 20)Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 RaceToHalt; - -/** Offset 0x081D - Max P-State Ratio - Max P-State Ratio, Valid Range 0 to 0x7F -**/ - UINT8 MaxRatio; - -/** Offset 0x081E - P-state ratios for custom P-state table - P-state ratios for custom P-state table. NumberOfEntries has valid range between - 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] - are configurable. Valid Range of each entry is 0 to 0x7F -**/ - UINT8 StateRatio[40]; - -/** Offset 0x0846 - P-state ratios for max 16 version of custom P-state table - P-state ratios for max 16 version of custom P-state table. This table is used for - OS versions limited to a max of 16 P-States. If the first entry of this table is - 0, or if Number of Entries is 16 or less, then this table will be ignored, and - up to the top 16 values of the StateRatio table will be used instead. Valid Range - of each entry is 0 to 0x7F -**/ - UINT8 StateRatioMax16[16]; - -/** Offset 0x0856 - Platform Power Pmax - PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments. - Range 0-1024 Watts. Value of 800 = 100W -**/ - UINT16 PsysPmax; - -/** Offset 0x0858 - Interrupt Response Time Limit of C-State LatencyContol0 - Interrupt Response Time Limit of C-State LatencyContol0.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl0Irtl; - -/** Offset 0x085A - Interrupt Response Time Limit of C-State LatencyContol1 - Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl1Irtl; - -/** Offset 0x085C - Interrupt Response Time Limit of C-State LatencyContol2 - Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl2Irtl; - -/** Offset 0x085E - Interrupt Response Time Limit of C-State LatencyContol3 - Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl3Irtl; - -/** Offset 0x0860 - Interrupt Response Time Limit of C-State LatencyContol4 - Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl4Irtl; - -/** Offset 0x0862 - Interrupt Response Time Limit of C-State LatencyContol5 - Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF -**/ - UINT16 CstateLatencyControl5Irtl; - -/** Offset 0x0864 - Package Long duration turbo mode power limit - Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. - Valid Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit1; - -/** Offset 0x0868 - Package Short duration turbo mode power limit - Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit2Power; - -/** Offset 0x086C - Package PL3 power limit - Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit3; - -/** Offset 0x0870 - Package PL4 power limit - Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 PowerLimit4; - -/** Offset 0x0874 - Tcc Offset Time Window for RATL - Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 TccOffsetTimeWindowForRatl; - -/** Offset 0x0878 - Short term Power Limit value for custom cTDP level 1 - Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom1PowerLimit1; - -/** Offset 0x087C - Long term Power Limit value for custom cTDP level 1 - Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom1PowerLimit2; - -/** Offset 0x0880 - Short term Power Limit value for custom cTDP level 2 - Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom2PowerLimit1; - -/** Offset 0x0884 - Long term Power Limit value for custom cTDP level 2 - Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom2PowerLimit2; - -/** Offset 0x0888 - Short term Power Limit value for custom cTDP level 3 - Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom3PowerLimit1; - -/** Offset 0x088C - Long term Power Limit value for custom cTDP level 3 - Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid - Range 0 to 4095875 in Step size of 125 -**/ - UINT32 Custom3PowerLimit2; - -/** Offset 0x0890 - Platform PL1 power - Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range - 0 to 4095875 in Step size of 125 -**/ - UINT32 PsysPowerLimit1Power; - -/** Offset 0x0894 - Platform PL2 power - Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range - 0 to 4095875 in Step size of 125 -**/ - UINT32 PsysPowerLimit2Power; - -/** Offset 0x0898 - Set Three Strike Counter Disable - False (default): Three Strike counter will be incremented and True: Prevents Three - Strike counter from incrementing; <b>0: False</b>; 1: True. - 0: False, 1: True -**/ - UINT8 ThreeStrikeCounterDisable; - -/** Offset 0x0899 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 HwpInterruptControl; - -/** Offset 0x089A - 5-Core Ratio Limit - 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 - 0x0:0xFF -**/ - UINT8 FiveCoreRatioLimit; - -/** Offset 0x089B - 6-Core Ratio Limit - 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 - 0x0:0xFF -**/ - UINT8 SixCoreRatioLimit; - -/** Offset 0x089C - 7-Core Ratio Limit - 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 - 0x0:0xFF -**/ - UINT8 SevenCoreRatioLimit; - -/** Offset 0x089D - 8-Core Ratio Limit - 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused - 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal - to 1-Core Ratio Limit.Range is 0 to 83 - 0x0:0xFF -**/ - UINT8 EightCoreRatioLimit; - -/** Offset 0x089E - Intel Turbo Boost Max Technology 3.0 - Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b> - $EN_DIS -**/ - UINT8 EnableItbm; - -/** Offset 0x089F - Intel Turbo Boost Max Technology 3.0 Driver - Intel Turbo Boost Max Technology 3.0 Driver <b>0: Disabled</b>; 1: Enabled - $EN_DIS -**/ - UINT8 EnableItbmDriver; - -/** Offset 0x08A0 - Enable or Disable C1 Cstate Demotion - Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 C1StateAutoDemotion; - -/** Offset 0x08A1 - Enable or Disable C1 Cstate UnDemotion - Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 C1StateUnDemotion; - -/** Offset 0x08A2 - CpuWakeUpTimer - Enable long CPU Wakeup Timer. When enabled, the cpu internal wakeup time is increased - to 180 seconds. 0: Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 CpuWakeUpTimer; - -/** Offset 0x08A3 - Minimum Ring ratio limit override - Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo - ratio limit -**/ - UINT8 MinRingRatioLimit; - -/** Offset 0x08A4 - Minimum Ring ratio limit override - Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo - ratio limit -**/ - UINT8 MaxRingRatioLimit; - -/** Offset 0x08A5 - Enable or Disable C3 Cstate Demotion - Enable or Disable C3 Cstate Demotion. Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 C3StateAutoDemotion; - -/** Offset 0x08A6 - Enable or Disable C3 Cstate UnDemotion - Enable or Disable C3 Cstate UnDemotion. Disable; <b>1: Enable</b> - $EN_DIS -**/ - UINT8 C3StateUnDemotion; - -/** Offset 0x08A7 - ReservedCpuPostMemTest - Reserved for CPU Post-Mem Test - $EN_DIS -**/ - UINT8 ReservedCpuPostMemTest[19]; - -/** Offset 0x08BA - SgxSinitDataFromTpm - SgxSinitDataFromTpm default values -**/ - UINT8 SgxSinitDataFromTpm; - -/** Offset 0x08BB - End of Post message - Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): - EOP send in PEI, Send in DXE(0x2)(Default): EOP send in PEI - 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved -**/ - UINT8 EndOfPostMessage; - -/** Offset 0x08BC - D0I3 Setting for HECI Disable - Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all - HECI devices - $EN_DIS -**/ - UINT8 DisableD0I3SettingForHeci; - -/** Offset 0x08BD - HD Audio Reset Wait Timer - The delay timer after Azalia reset, the value is number of microseconds. Default is 600. -**/ - UINT16 PchHdaResetWaitTimer; - -/** Offset 0x08BF - Enable LOCKDOWN SMI - Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. - $EN_DIS -**/ - UINT8 PchLockDownGlobalSmi; - -/** Offset 0x08C0 - Enable LOCKDOWN BIOS Interface - Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. - $EN_DIS -**/ - UINT8 PchLockDownBiosInterface; - -/** Offset 0x08C1 - Unlock all GPIO pads - Force all GPIO pads to be unlocked for debug purpose. - $EN_DIS -**/ - UINT8 PchUnlockGpioPads; - -/** Offset 0x08C2 - PCH Unlock SBI access - Deprecated - $EN_DIS -**/ - UINT8 PchSbiUnlock; - -/** Offset 0x08C3 - PCH Unlock SideBand access - The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before - 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. - $EN_DIS -**/ - UINT8 PchSbAccessUnlock; - -/** Offset 0x08C4 - PCIE RP Ltr Max Snoop Latency - Latency Tolerance Reporting, Max Snoop Latency. -**/ - UINT16 PcieRpLtrMaxSnoopLatency[24]; - -/** Offset 0x08F4 - PCIE RP Ltr Max No Snoop Latency - Latency Tolerance Reporting, Max Non-Snoop Latency. -**/ - UINT16 PcieRpLtrMaxNoSnoopLatency[24]; - -/** Offset 0x0924 - PCIE RP Snoop Latency Override Mode - Latency Tolerance Reporting, Snoop Latency Override Mode. -**/ - UINT8 PcieRpSnoopLatencyOverrideMode[24]; - -/** Offset 0x093C - PCIE RP Snoop Latency Override Multiplier - Latency Tolerance Reporting, Snoop Latency Override Multiplier. -**/ - UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; - -/** Offset 0x0954 - PCIE RP Snoop Latency Override Value - Latency Tolerance Reporting, Snoop Latency Override Value. -**/ - UINT16 PcieRpSnoopLatencyOverrideValue[24]; - -/** Offset 0x0984 - PCIE RP Non Snoop Latency Override Mode - Latency Tolerance Reporting, Non-Snoop Latency Override Mode. -**/ - UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; - -/** Offset 0x099C - PCIE RP Non Snoop Latency Override Multiplier - Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. -**/ - UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; - -/** Offset 0x09B4 - PCIE RP Non Snoop Latency Override Value - Latency Tolerance Reporting, Non-Snoop Latency Override Value. -**/ - UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; - -/** Offset 0x09E4 - PCIE RP Slot Power Limit Scale - Specifies scale used for slot power limit value. Leave as 0 to set to default. -**/ - UINT8 PcieRpSlotPowerLimitScale[24]; - -/** Offset 0x09FC - PCIE RP Slot Power Limit Value - Specifies upper limit on power supplie by slot. Leave as 0 to set to default. -**/ - UINT16 PcieRpSlotPowerLimitValue[24]; - -/** Offset 0x0A2C - PCIE RP Upstream Port Transmiter Preset - Used during Gen3 Link Equalization. Used for all lanes. Default is 5. -**/ - UINT8 PcieRpUptp[24]; - -/** Offset 0x0A44 - PCIE RP Downstream Port Transmiter Preset - Used during Gen3 Link Equalization. Used for all lanes. Default is 7. -**/ - UINT8 PcieRpDptp[24]; - -/** Offset 0x0A5C - PCIE RP Enable Port8xh Decode - This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; - 1: Enable. - $EN_DIS -**/ - UINT8 PcieEnablePort8xhDecode; - -/** Offset 0x0A5D - PCIE Port8xh Decode Port Index - The Index of PCIe Port that is selected for Port8xh Decode (0 Based). -**/ - UINT8 PchPciePort8xhDecodePortIndex; - -/** Offset 0x0A5E - PCH Energy Reporting - Disable/Enable PCH to CPU energy report feature. - $EN_DIS -**/ - UINT8 PchPmDisableEnergyReport; - -/** Offset 0x0A5F - PCH Sata Test Mode - Allow entrance to the PCH SATA test modes. - $EN_DIS -**/ - UINT8 SataTestMode; - -/** Offset 0x0A60 - PCH USB OverCurrent mapping lock enable - If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning - that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. - $EN_DIS -**/ - UINT8 PchXhciOcLock; - -/** Offset 0x0A61 -**/ - UINT8 UnusedUpdSpace26[17]; - -/** Offset 0x0A72 - Skip POSTBOOT SAI - Deprecated - $EN_DIS -**/ - UINT8 SkipPostBootSai; - -/** Offset 0x0A73 - Mctp Broadcast Cycle - Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable. - $EN_DIS -**/ - UINT8 MctpBroadcastCycle; - -/** Offset 0x0A74 -**/ - UINT8 ReservedFspsTestUpd[12]; -} FSP_S_TEST_CONFIG; - -/** Fsp S UPD Configuration -**/ -typedef struct { - -/** Offset 0x0000 -**/ - FSP_UPD_HEADER FspUpdHeader; - -/** Offset 0x0020 -**/ - FSP_S_CONFIG FspsConfig; - -/** Offset 0x07AD -**/ - FSP_S_TEST_CONFIG FspsTestConfig; - -/** Offset 0x0A80 -**/ - UINT16 UpdTerminator; -} FSPS_UPD; - -#pragma pack() - -#endif +
+/** Fsp S Configuration
+**/
+typedef struct {
+
+/** Offset 0x0020 - Logo Pointer
+ Points to PEI Display Logo Image
+**/
+ UINT32 LogoPtr;
+
+/** Offset 0x0024 - Logo Size
+ Size of PEI Display Logo Image
+**/
+ UINT32 LogoSize;
+
+/** Offset 0x0028 - Graphics Configuration Ptr
+ Points to VBT
+**/
+ UINT32 GraphicsConfigPtr;
+
+/** Offset 0x002C - Enable Device 4
+ Enable/disable Device 4
+ $EN_DIS
+**/
+ UINT8 Device4Enable;
+
+/** Offset 0x002D - Enable HD Audio DSP
+ Enable/disable HD Audio DSP feature.
+ $EN_DIS
+**/
+ UINT8 PchHdaDspEnable;
+
+/** Offset 0x002E
+**/
+ UINT8 UnusedUpdSpace0[3];
+
+/** Offset 0x0031 - Enable eMMC Controller
+ Enable/disable eMMC Controller.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcEnabled;
+
+/** Offset 0x0032 - Enable eMMC HS400 Mode
+ Enable eMMC HS400 Mode.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcHs400Enabled;
+
+/** Offset 0x0033 - Enable SdCard Controller
+ Enable/disable SD Card Controller.
+ $EN_DIS
+**/
+ UINT8 ScsSdCardEnabled;
+
+/** Offset 0x0034 - Show SPI controller
+ Enable/disable to show SPI controller.
+ $EN_DIS
+**/
+ UINT8 ShowSpiController;
+
+/** Offset 0x0035
+**/
+ UINT8 UnusedUpdSpace1[3];
+
+/** Offset 0x0038 - MicrocodeRegionBase
+ Memory Base of Microcode Updates
+**/
+ UINT32 MicrocodeRegionBase;
+
+/** Offset 0x003C - MicrocodeRegionSize
+ Size of Microcode Updates
+**/
+ UINT32 MicrocodeRegionSize;
+
+/** Offset 0x0040 - Turbo Mode
+ Enable/Disable Turbo mode. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 TurboMode;
+
+/** Offset 0x0041 - Enable SATA SALP Support
+ Enable/disable SATA Aggressive Link Power Management.
+ $EN_DIS
+**/
+ UINT8 SataSalpSupport;
+
+/** Offset 0x0042 - Enable SATA ports
+ Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1,
+ and so on.
+**/
+ UINT8 SataPortsEnable[8];
+
+/** Offset 0x004A - Enable SATA DEVSLP Feature
+ Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each
+ port, byte0 for port0, byte1 for port1, and so on.
+**/
+ UINT8 SataPortsDevSlp[8];
+
+/** Offset 0x0052 - Enable USB2 ports
+ Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb20Enable[16];
+
+/** Offset 0x0062 - Enable USB3 ports
+ Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb30Enable[10];
+
+/** Offset 0x006C - Enable xDCI controller
+ Enable/disable to xDCI controller.
+ $EN_DIS
+**/
+ UINT8 XdciEnable;
+
+/** Offset 0x006D
+**/
+ UINT8 UnusedUpdSpace2[2];
+
+/** Offset 0x006F - Enable SerialIo Device Mode
+ 0:Disabled, 1:PCI Mode, 2:Acpi mode, 3:Hidden mode (Legacy UART mode) - Enable/disable
+ SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5,SPI0,SPI1,SPI2,UART0,UART1,UART2 device
+ mode respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1,
+ and so on.
+**/
+ UINT8 SerialIoDevMode[12];
+
+/** Offset 0x007B - Address of PCH_DEVICE_INTERRUPT_CONFIG table.
+ The address of the table of PCH_DEVICE_INTERRUPT_CONFIG.
+**/
+ UINT32 DevIntConfigPtr;
+
+/** Offset 0x007F - Number of DevIntConfig Entry
+ Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr
+ must not be NULL.
+**/
+ UINT8 NumOfDevIntConfig;
+
+/** Offset 0x0080 - PIRQx to IRQx Map Config
+ PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for
+ PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy
+ 8259 PCI mode.
+**/
+ UINT8 PxRcConfig[8];
+
+/** Offset 0x0088 - Select GPIO IRQ Route
+ GPIO IRQ Select. The valid value is 14 or 15.
+**/
+ UINT8 GpioIrqRoute;
+
+/** Offset 0x0089 - Select SciIrqSelect
+ SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only.
+**/
+ UINT8 SciIrqSelect;
+
+/** Offset 0x008A - Select TcoIrqSelect
+ TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23.
+**/
+ UINT8 TcoIrqSelect;
+
+/** Offset 0x008B - Enable/Disable Tco IRQ
+ Enable/disable TCO IRQ
+ $EN_DIS
+**/
+ UINT8 TcoIrqEnable;
+
+/** Offset 0x008C - PCH HDA Verb Table Entry Number
+ Number of Entries in Verb Table.
+**/
+ UINT8 PchHdaVerbTableEntryNum;
+
+/** Offset 0x008D - PCH HDA Verb Table Pointer
+ Pointer to Array of pointers to Verb Table.
+**/
+ UINT32 PchHdaVerbTablePtr;
+
+/** Offset 0x0091 - PCH HDA Codec Sx Wake Capability
+ Capability to detect wake initiated by a codec in Sx
+**/
+ UINT8 PchHdaCodecSxWakeCapability;
+
+/** Offset 0x0092 - Enable SATA
+ Enable/disable SATA controller.
+ $EN_DIS
+**/
+ UINT8 SataEnable;
+
+/** Offset 0x0093 - SATA Mode
+ Select SATA controller working mode.
+ 0:AHCI, 1:RAID
+**/
+ UINT8 SataMode;
+
+/** Offset 0x0094 - USB Per Port HS Preemphasis Bias
+ USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port.
+**/
+ UINT8 Usb2AfePetxiset[16];
+
+/** Offset 0x00A4 - USB Per Port HS Transmitter Bias
+ USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port.
+**/
+ UINT8 Usb2AfeTxiset[16];
+
+/** Offset 0x00B4 - USB Per Port HS Transmitter Emphasis
+ USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON,
+ 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port.
+**/
+ UINT8 Usb2AfePredeemp[16];
+
+/** Offset 0x00C4 - USB Per Port Half Bit Pre-emphasis
+ USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis.
+ One byte for each port.
+**/
+ UINT8 Usb2AfePehalfbit[16];
+
+/** Offset 0x00D4 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment
+ Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmphEnable[10];
+
+/** Offset 0x00DE - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting
+ USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16],
+ <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmph[10];
+
+/** Offset 0x00E8 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment
+ Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmpEnable[10];
+
+/** Offset 0x00F2 - USB 3.0 TX Output Downscale Amplitude Adjustment
+ USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default
+ = 00h</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmp[10];
+
+/** Offset 0x00FC - Enable LAN
+ Enable/disable LAN controller.
+ $EN_DIS
+**/
+ UINT8 PchLanEnable;
+
+/** Offset 0x00FD - Enable HD Audio Link
+ Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkHda;
+
+/** Offset 0x00FE - Enable HD Audio DMIC0 Link
+ Enable/disable HD Audio DMIC0 link. Muxed with SNDW4.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkDmic0;
+
+/** Offset 0x00FF - Enable HD Audio DMIC1 Link
+ Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkDmic1;
+
+/** Offset 0x0100 - Enable HD Audio SSP0 Link
+ Enable/disable HD Audio SSP0/I2S link. Muxed with HDA.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp0;
+
+/** Offset 0x0101 - Enable HD Audio SSP1 Link
+ Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp1;
+
+/** Offset 0x0102 - Enable HD Audio SSP2 Link
+ Enable/disable HD Audio SSP2/I2S link.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp2;
+
+/** Offset 0x0103 - Enable HD Audio SoundWire#1 Link
+ Enable/disable HD Audio SNDW1 link. Muxed with HDA.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw1;
+
+/** Offset 0x0104 - Enable HD Audio SoundWire#2 Link
+ Enable/disable HD Audio SNDW2 link. Muxed with SSP1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw2;
+
+/** Offset 0x0105 - Enable HD Audio SoundWire#3 Link
+ Enable/disable HD Audio SNDW3 link. Muxed with DMIC1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw3;
+
+/** Offset 0x0106 - Enable HD Audio SoundWire#4 Link
+ Enable/disable HD Audio SNDW4 link. Muxed with DMIC0.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw4;
+
+/** Offset 0x0107 - Soundwire Clock Buffer GPIO RCOMP Setting
+ 0: non-ACT - 50 Ohm driver impedance, 1: ACT - 8 Ohm driver impedance.
+ $EN_DIS
+**/
+ UINT8 PchHdaSndwBufferRcomp;
+
+/** Offset 0x0108 - PTM for PCIE RP Mask
+ Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpPtmMask;
+
+/** Offset 0x010C - DPC for PCIE RP Mask
+ Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpDpcMask;
+
+/** Offset 0x0110 - DPC Extensions PCIE RP Mask
+ Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit
+ for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpDpcExtensionsMask;
+
+/** Offset 0x0114 - USB PDO Programming
+ Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming
+ during later phase. 1: enable, 0: disable
+ $EN_DIS
+**/
+ UINT8 UsbPdoProgramming;
+
+/** Offset 0x0115 - Power button debounce configuration
+ Debounce time for PWRBTN in microseconds. For values not supported by HW, they will
+ be rounded down to closest supported on. 0: disable, 250-1024000us: supported range
+**/
+ UINT32 PmcPowerButtonDebounce;
+
+/** Offset 0x0119 - PCH eSPI Master and Slave BME enabled
+ PCH eSPI Master and Slave BME enabled
+ $EN_DIS
+**/
+ UINT8 PchEspiBmeMasterSlaveEnabled;
+
+/** Offset 0x011A - PCH SATA use RST Legacy OROM
+ Use PCH SATA RST Legacy OROM when CSM is Enabled
+ $EN_DIS
+**/
+ UINT8 SataRstLegacyOrom;
+
+/** Offset 0x011B - Trace Hub Memory Base
+ If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate
+ trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub
+ memory is configured properly.
+**/
+ UINT32 TraceHubMemBase;
+
+/** Offset 0x011F - PMC Debug Message Enable
+ When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW
+ will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix
+ $EN_DIS
+**/
+ UINT8 PmcDbgMsgEn;
+
+/** Offset 0x0120 - Pointer of ChipsetInit Binary
+ ChipsetInit Binary Pointer.
+**/
+ UINT32 ChipsetInitBinPtr;
+
+/** Offset 0x0124 - Length of ChipsetInit Binary
+ ChipsetInit Binary Length.
+**/
+ UINT32 ChipsetInitBinLen;
+
+/** Offset 0x0128 - PchPostMemRsvd
+ Reserved for PCH Post-Mem
+ $EN_DIS
+**/
+ UINT8 PchPostMemRsvd[29];
+
+/** Offset 0x0145 - Enable Ufs Controller
+ Enable/disable Ufs 2.0 Controller.
+ $EN_DIS
+**/
+ UINT8 ScsUfsEnabled;
+
+/** Offset 0x0146 - CNVi Configuration
+ This option allows for automatic detection of Connectivity Solution. [Auto Detection]
+ assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi.
+ 0:Disable, 1:Auto
+**/
+ UINT8 PchCnviMode;
+
+/** Offset 0x0147 - SdCard power enable polarity
+ Choose SD_PWREN# polarity
+ 0: Active low, 1: Active high
+**/
+ UINT8 SdCardPowerEnableActiveHigh;
+
+/** Offset 0x0148 - PCH USB2 PHY Power Gating enable
+ 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY
+ Sus Well PG
+ $EN_DIS
+**/
+ UINT8 PchUsb2PhySusPgEnable;
+
+/** Offset 0x0149 - PCH USB OverCurrent mapping enable
+ 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin
+ mapping allow for NOA usage of OC pins
+ $EN_DIS
+**/
+ UINT8 PchUsbOverCurrentEnable;
+
+/** Offset 0x014A
+**/
+ UINT8 UnusedUpdSpace3;
+
+/** Offset 0x014B - CNVi MfUart1 Type
+ This option configures Uart type which connects to MfUart1
+ 0:ISH Uart0, 1:SerialIO Uart2, 2:Uart over external pads
+**/
+ UINT8 PchCnviMfUart1Type;
+
+/** Offset 0x014C - Espi Lgmr Memory Range decode
+ This option enables or disables espi lgmr
+ $EN_DIS
+**/
+ UINT8 PchEspiLgmrEnable;
+
+/** Offset 0x014D - HECI3 state
+ The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed.
+ 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 Heci3Enabled;
+
+/** Offset 0x014E
+**/
+ UINT8 UnusedUpdSpace4;
+
+/** Offset 0x014F - PCHHOT# pin
+ Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchHotEnable;
+
+/** Offset 0x0150 - SATA LED
+ SATA LED indicating SATA controller activity. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 SataLedEnable;
+
+/** Offset 0x0151 - VRAlert# Pin
+ When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling
+ to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmVrAlert;
+
+/** Offset 0x0152 - SLP_S0 VM Dynamic Control
+ SLP_S0 Voltage Margining Runtime Control Policy. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmSlpS0VmRuntimeControl;
+
+/** Offset 0x0153 - SLP_S0 VM 0.70V Support
+ SLP_S0 Voltage Margining 0.70V Support Policy. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmSlpS0Vm070VSupport;
+
+/** Offset 0x0154 - SLP_S0 VM 0.75V Support
+ SLP_S0 Voltage Margining 0.75V Support Policy. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmSlpS0Vm075VSupport;
+
+/** Offset 0x0155 - AMT Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality.
+ $EN_DIS
+**/
+ UINT8 AmtEnabled;
+
+/** Offset 0x0156 - WatchDog Timer Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer.
+ $EN_DIS
+**/
+ UINT8 WatchDog;
+
+/** Offset 0x0157 - ASF Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable ASF functionality.
+ $EN_DIS
+**/
+ UINT8 AsfEnabled;
+
+/** Offset 0x0158 - Manageability Mode set by Mebx
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode.
+ $EN_DIS
+**/
+ UINT8 ManageabilityMode;
+
+/** Offset 0x0159 - PET Progress
+ Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive
+ PET Events.
+ $EN_DIS
+**/
+ UINT8 FwProgress;
+
+/** Offset 0x015A - SOL Switch
+ Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx
+ $EN_DIS
+**/
+ UINT8 AmtSolEnabled;
+
+/** Offset 0x015B - OS Timer
+ 16 bits Value, Set OS watchdog timer.
+ $EN_DIS
+**/
+ UINT16 WatchDogTimerOs;
+
+/** Offset 0x015D - BIOS Timer
+ 16 bits Value, Set BIOS watchdog timer.
+ $EN_DIS
+**/
+ UINT16 WatchDogTimerBios;
+
+/** Offset 0x015F - Remote Assistance Trigger Availablilty
+ Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx
+ $EN_DIS
+**/
+ UINT8 RemoteAssistance;
+
+/** Offset 0x0160 - KVM Switch
+ Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx
+ $EN_DIS
+**/
+ UINT8 AmtKvmEnabled;
+
+/** Offset 0x0161 - MEBX execution
+ Enable/Disable. 0: Disable, 1: enable, Force MEBX execution
+ $EN_DIS
+**/
+ UINT8 ForcMebxSyncUp;
+
+/** Offset 0x0162
+**/
+ UINT8 UnusedUpdSpace5[1];
+
+/** Offset 0x0163 - PCH PCIe root port connection type
+ 0: built-in device, 1:slot
+**/
+ UINT8 PcieRpSlotImplemented[24];
+
+/** Offset 0x017B - Usage type for ClkSrc
+ 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
+ (free running), 0xFF: not used
+**/
+ UINT8 PcieClkSrcUsage[16];
+
+/** Offset 0x018B - ClkReq-to-ClkSrc mapping
+ Number of ClkReq signal assigned to ClkSrc
+**/
+ UINT8 PcieClkSrcClkReq[16];
+
+/** Offset 0x019B - PCIE RP Access Control Services Extended Capability
+ Enable/Disable PCIE RP Access Control Services Extended Capability
+**/
+ UINT8 PcieRpAcsEnabled[24];
+
+/** Offset 0x01B3 - PCIE RP Clock Power Management
+ Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
+ can still be controlled by L1 PM substates mechanism
+**/
+ UINT8 PcieRpEnableCpm[24];
+
+/** Offset 0x01CB - PCIE RP Detect Timeout Ms
+ The number of milliseconds within 0~65535 in reference code will wait for link to
+ exit Detect state for enabled ports before assuming there is no device and potentially
+ disabling the port.
+**/
+ UINT16 PcieRpDetectTimeoutMs[24];
+
+/** Offset 0x01FB - ModPHY SUS Power Domain Dynamic Gating
+ Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on
+ PCH-H. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcModPhySusPgEnable;
+
+/** Offset 0x01FC - SlpS0WithGbeSupport
+ Enable/Disable SLP_S0 with GBE Support. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 SlpS0WithGbeSupport;
+
+/** Offset 0x01FD
+**/
+ UINT8 UnusedUpdSpace6[3];
+
+/** Offset 0x0200 - Enable/Disable SA CRID
+ Enable: SA CRID, Disable (Default): SA CRID
+ $EN_DIS
+**/
+ UINT8 CridEnable;
+
+/** Offset 0x0201 - DMI ASPM
+ 0=Disable, 1:L0s, 2:L1, 3(Default)=L0sL1
+ 0:Disable, 1:L0s, 2:L1, 3:L0sL1
+**/
+ UINT8 DmiAspm;
+
+/** Offset 0x0202 - PCIe DeEmphasis control per root port
+ 0: -6dB, 1(Default): -3.5dB
+ 0:-6dB, 1:-3.5dB
+**/
+ UINT8 PegDeEmphasis[4];
+
+/** Offset 0x0206 - PCIe Slot Power Limit value per root port
+ Slot power limit value per root port
+**/
+ UINT8 PegSlotPowerLimitValue[4];
+
+/** Offset 0x020A - PCIe Slot Power Limit scale per root port
+ Slot power limit scale per root port
+ 0:1.0x, 1:0.1x, 2:0.01x, 3:0x001x
+**/
+ UINT8 PegSlotPowerLimitScale[4];
+
+/** Offset 0x020E - PCIe Physical Slot Number per root port
+ Physical Slot Number per root port
+**/
+ UINT16 PegPhysicalSlotNumber[4];
+
+/** Offset 0x0216 - Enable/Disable PavpEnable
+ Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable
+ $EN_DIS
+**/
+ UINT8 PavpEnable;
+
+/** Offset 0x0217 - CdClock Frequency selection
+ 0=337.5 Mhz, 1=450 Mhz, 2=540 Mhz, 3(Default)=675 Mhz
+ 0: 337.5 Mhz, 1: 450 Mhz, 2: 540 Mhz, 3: 675 Mhz
+**/
+ UINT8 CdClock;
+
+/** Offset 0x0218 - Enable/Disable PeiGraphicsPeimInit
+ Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit
+ $EN_DIS
+**/
+ UINT8 PeiGraphicsPeimInit;
+
+/** Offset 0x0219
+**/
+ UINT8 UnusedUpdSpace7;
+
+/** Offset 0x021A - Enable or disable GNA device
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 GnaEnable;
+
+/** Offset 0x021B - State of X2APIC_OPT_OUT bit in the DMAR table
+ 0=Disable/Clear, 1=Enable/Set
+ $EN_DIS
+**/
+ UINT8 X2ApicOptOut;
+
+/** Offset 0x021C - Base addresses for VT-d function MMIO access
+ Base addresses for VT-d MMIO access per VT-d engine
+**/
+ UINT32 VtdBaseAddress[3];
+
+/** Offset 0x0228 - Enable or disable eDP device
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortEdp;
+
+/** Offset 0x0229 - Enable or disable HPD of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBHpd;
+
+/** Offset 0x022A - Enable or disable HPD of DDI port C
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCHpd;
+
+/** Offset 0x022B - Enable or disable HPD of DDI port D
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortDHpd;
+
+/** Offset 0x022C - Enable or disable HPD of DDI port F
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortFHpd;
+
+/** Offset 0x022D - Enable or disable DDC of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBDdc;
+
+/** Offset 0x022E - Enable or disable DDC of DDI port C
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCDdc;
+
+/** Offset 0x022F - Enable or disable DDC of DDI port D
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortDDdc;
+
+/** Offset 0x0230 - Enable or disable DDC of DDI port F
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortFDdc;
+
+/** Offset 0x0231 - Enable/Disable SkipS3CdClockInit
+ Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full
+ CD clock in S3 resume due to GOP absent
+ $EN_DIS
+**/
+ UINT8 SkipS3CdClockInit;
+
+/** Offset 0x0232 - Delta T12 Power Cycle Delay required in ms
+ Select the value for delay required. 0(Default)= No delay, 0xFFFF = Auto calculate
+ T12 Delay to max 500ms
+ 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay
+**/
+ UINT16 DeltaT12PowerCycleDelay;
+
+/** Offset 0x0234 - Blt Buffer Address
+ Address of Blt buffer
+**/
+ UINT32 BltBufferAddress;
+
+/** Offset 0x0238 - Blt Buffer Size
+ Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+**/
+ UINT32 BltBufferSize;
+
+/** Offset 0x023C - SaPostMemProductionRsvd
+ Reserved for SA Post-Mem Production
+ $EN_DIS
+**/
+ UINT8 SaPostMemProductionRsvd[35];
+
+/** Offset 0x025F - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable
+ PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable Workaround needed for
+ Alpine ridge
+**/
+ UINT8 PcieRootPortGen2PllL1CgDisable[24];
+
+/** Offset 0x0277 - Advanced Encryption Standard (AES) feature
+ Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable
+ $EN_DIS
+**/
+ UINT8 AesEnable;
+
+/** Offset 0x0278 - Power State 3 enable/disable
+ PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>.
+ For all VR Indexes
+**/
+ UINT8 Psi3Enable[5];
+
+/** Offset 0x027D - Power State 4 enable/disable
+ PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For
+ all VR Indexes
+**/
+ UINT8 Psi4Enable[5];
+
+/** Offset 0x0282 - Imon slope correction
+ PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
+ Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
+**/
+ UINT8 ImonSlope[5];
+
+/** Offset 0x0287 - Imon offset correction
+ PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer.
+ Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b>
+**/
+ UINT8 ImonOffset[5];
+
+/** Offset 0x028C - Enable/Disable BIOS configuration of VR
+ Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes
+**/
+ UINT8 VrConfigEnable[5];
+
+/** Offset 0x0291 - Thermal Design Current enable/disable
+ PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1:
+ Enable.For all VR Indexes
+**/
+ UINT8 TdcEnable[5];
+
+/** Offset 0x0296 - HECI3 state
+ PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
+ Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - 6ms , 7 - 7ms
+ , 8 - 8ms , 10 - 10ms.For all VR Indexe
+**/
+ UINT8 TdcTimeWindow[5];
+
+/** Offset 0x029B - Thermal Design Current Lock
+ PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For
+ all VR Indexes
+**/
+ UINT8 TdcLock[5];
+
+/** Offset 0x02A0 - Platform Psys slope correction
+ PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in
+ 1/100 increment values. Range is 0-200. 125 = 1.25
+**/
+ UINT8 PsysSlope;
+
+/** Offset 0x02A1 - Platform Psys offset correction
+ PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/4,
+ Range 0-255. Value of 100 = 100/4 = 25 offset
+**/
+ UINT8 PsysOffset;
+
+/** Offset 0x02A2 - Acoustic Noise Mitigation feature
+ Enable or Disable Acoustic Noise Mitigation feature. This has to be enabled to program
+ slew rate configuration for all VR domains, Pre Wake, Ramp Up and, Ramp Down times.<b>0:
+ Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 AcousticNoiseMitigation;
+
+/** Offset 0x02A3 - Disable Fast Slew Rate for Deep Package C States for VR IA domain
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
+**/
+ UINT8 FastPkgCRampDisableIa;
+
+/** Offset 0x02A4 - Slew Rate configuration for Deep Package C States for VR IA domain
+ Slew Rate configuration for Deep Package C States for VR IA domain based on Acoustic
+ Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRateForIa;
+
+/** Offset 0x02A5 - Slew Rate configuration for Deep Package C States for VR GT domain
+ Slew Rate configuration for Deep Package C States for VR GT domain based on Acoustic
+ Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRateForGt;
+
+/** Offset 0x02A6 - Slew Rate configuration for Deep Package C States for VR SA domain
+ Slew Rate configuration for Deep Package C States for VR SA domain based on Acoustic
+ Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRateForSa;
+
+/** Offset 0x02A7 - Thermal Design Current current limit
+ PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units.
+ Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes
+**/
+ UINT16 TdcPowerLimit[5];
+
+/** Offset 0x02B1 - AcLoadline
+ PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249. <b>Intel Recommended Defaults vary by domain and SKU.
+**/
+ UINT16 AcLoadline[5];
+
+/** Offset 0x02BB
+**/
+ UINT8 UnusedUpdSpace8[10];
+
+/** Offset 0x02C5 - DcLoadline
+ PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b>
+**/
+ UINT16 DcLoadline[5];
+
+/** Offset 0x02CF - Power State 1 Threshold current
+ PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi1Threshold[5];
+
+/** Offset 0x02D9 - Power State 2 Threshold current
+ PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi2Threshold[5];
+
+/** Offset 0x02E3 - Power State 3 Threshold current
+ PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi3Threshold[5];
+
+/** Offset 0x02ED - Icc Max limit
+ PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A
+**/
+ UINT16 IccMax[5];
+
+/** Offset 0x02F7 - VR Voltage Limit
+ PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV.
+**/
+ UINT16 VrVoltageLimit[5];
+
+/** Offset 0x0301 - Disable Fast Slew Rate for Deep Package C States for VR GT domain
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
+**/
+ UINT8 FastPkgCRampDisableGt;
+
+/** Offset 0x0302 - Disable Fast Slew Rate for Deep Package C States for VR SA domain
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
+**/
+ UINT8 FastPkgCRampDisableSa;
+
+/** Offset 0x0303 - Enable VR specific mailbox command
+ VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A
+ VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific
+ command sent for PS4 exit issue. 11b - Reserved.
+ $EN_DIS
+**/
+ UINT8 SendVrMbxCmd;
+
+/** Offset 0x0304 - Reserved
+ Reserved
+**/
+ UINT8 Reserved2;
+
+/** Offset 0x0305 - Enable or Disable TXT
+ Enable or Disable TXT; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 TxtEnable;
+
+/** Offset 0x0306
+**/
+ UINT8 UnusedUpdSpace9[6];
+
+/** Offset 0x030C - Deprecated DO NOT USE Skip Multi-Processor Initialization
+ @deprecated SkipMpInit has been moved to FspmUpd
+ $EN_DIS
+**/
+ UINT8 SkipMpInit;
+
+/** Offset 0x030D - McIVR RFI Frequency Prefix
+ PCODE MMIO Mailbox: McIVR RFI Frequency Adjustment Prefix. <b>0: Plus (+)</b>; 1:
+ Minus (-).
+**/
+ UINT8 McivrRfiFrequencyPrefix;
+
+/** Offset 0x030E - McIVR RFI Frequency Adjustment
+ PCODE MMIO Mailbox: Adjust the RFI frequency relative to the nominal frequency in
+ increments of 100KHz. For subtraction, change McivrRfiFrequencyPrefix. <b>0: Auto</b>.
+**/
+ UINT8 McivrRfiFrequencyAdjust;
+
+/** Offset 0x030F - FIVR RFI Frequency
+ PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0:
+ Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock;
+ 0-1535 (Up to 153.5MHz) for 19MHz clock.
+**/
+ UINT16 FivrRfiFrequency;
+
+/** Offset 0x0311 - McIVR RFI Spread Spectrum
+ PCODE MMIO Mailbox: McIVR RFI Spread Spectrum. <b>0: 0%</b>; 1: +/- 0.5%; 2: +/-
+ 1%; 3: +/- 1.5%; 4: +/- 2%; 5: +/- 3%; 6: +/- 4%; 7: +/- 5%; 8: +/- 6%.
+**/
+ UINT8 McivrSpreadSpectrum;
+
+/** Offset 0x0312 - FIVR RFI Spread Spectrum
+ PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments. <b>0: 0%</b>;
+ Range: 0.0% to 10.0% (0-100).
+**/
+ UINT8 FivrSpreadSpectrum;
+
+/** Offset 0x0313 - Disable Fast Slew Rate for Deep Package C States for VR FIVR domain
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
+**/
+ UINT8 FastPkgCRampDisableFivr;
+
+/** Offset 0x0314 - Slew Rate configuration for Deep Package C States for VR FIVR domain
+ Slew Rate configuration for Deep Package C States for VR FIVR domain based on Acoustic
+ Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRateForFivr;
+
+/** Offset 0x0315 - CpuBistData
+ Pointer CPU BIST Data
+**/
+ UINT32 CpuBistData;
+
+/** Offset 0x0319 - Activates VR mailbox command for Intersil VR C-state issues.
+ Intersil VR mailbox command. <b>0 - no mailbox command sent.</b> 1 - VR mailbox
+ command sent for IA/GT rails only. 2 - VR mailbox command sent for IA/GT/SA rails.
+**/
+ UINT8 IslVrCmd;
+
+/** Offset 0x031A - Imon slope1 correction
+ PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
+ Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
+**/
+ UINT16 ImonSlope1[5];
+
+/** Offset 0x0324 - CPU VR Power Delivery Design
+ Used to communicate the power delivery design capability of the board. This value
+ is an enum of the available power delivery segments that are defined in the Platform
+ Design Guide.
+**/
+ UINT32 VrPowerDeliveryDesign;
+
+/** Offset 0x0328 - Pre Wake Randomization time
+ PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum pre-wake randomization
+ time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.
+ Range 0-255 <b>0</b>.
+**/
+ UINT8 PreWake;
+
+/** Offset 0x0329 - Ramp Up Randomization time
+ PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum Ramp Up randomization
+ time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.Range
+ 0-255 <b>0</b>.
+**/
+ UINT8 RampUp;
+
+/** Offset 0x032A - Ramp Down Randomization time
+ PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum Ramp Down randomization
+ time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.Range
+ 0-255 <b>0</b>.
+**/
+ UINT8 RampDown;
+
+/** Offset 0x032B - CpuMpPpi
+ Pointer for CpuMpPpi
+**/
+ UINT32 CpuMpPpi;
+
+/** Offset 0x032F - CpuMpHob
+ Pointer for CpuMpHob. This is optional data buffer for CpuMpPpi usage.
+**/
+ UINT32 CpuMpHob;
+
+/** Offset 0x0333 - Enable or Disable processor debug features
+ Enable or Disable processor debug features; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 DebugInterfaceEnable;
+
+/** Offset 0x0334 - ReservedCpuPostMemProduction
+ Reserved for CPU Post-Mem Production
+ $EN_DIS
+**/
+ UINT8 ReservedCpuPostMemProduction[18];
+
+/** Offset 0x0346 - Enable DMI ASPM
+ Deprecated.
+ $EN_DIS
+**/
+ UINT8 PchDmiAspm;
+
+/** Offset 0x0347 - Enable Power Optimizer
+ Enable DMI Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 PchPwrOptEnable;
+
+/** Offset 0x0348 - PCH Flash Protection Ranges Write Enble
+ Write or erase is blocked by hardware.
+**/
+ UINT8 PchWriteProtectionEnable[5];
+
+/** Offset 0x034D - PCH Flash Protection Ranges Read Enble
+ Read is blocked by hardware.
+**/
+ UINT8 PchReadProtectionEnable[5];
+
+/** Offset 0x0352 - PCH Protect Range Limit
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for
+ limit comparison.
+**/
+ UINT16 PchProtectedRangeLimit[5];
+
+/** Offset 0x035C - PCH Protect Range Base
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be 0.
+**/
+ UINT16 PchProtectedRangeBase[5];
+
+/** Offset 0x0366 - Enable Pme
+ Enable Azalia wake-on-ring.
+ $EN_DIS
+**/
+ UINT8 PchHdaPme;
+
+/** Offset 0x0367
+**/
+ UINT8 UnusedUpdSpace10;
+
+/** Offset 0x0368 - VC Type
+ Virtual Channel Type Select: 0: VC0, 1: VC1.
+ 0: VC0, 1: VC1
+**/
+ UINT8 PchHdaVcType;
+
+/** Offset 0x0369 - HD Audio Link Frequency
+ HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz.
+ 0: 6MHz, 1: 12MHz, 2: 24MHz
+**/
+ UINT8 PchHdaLinkFrequency;
+
+/** Offset 0x036A - iDisp-Link Frequency
+ iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz.
+ 4: 96MHz, 3: 48MHz
+**/
+ UINT8 PchHdaIDispLinkFrequency;
+
+/** Offset 0x036B - iDisp-Link T-mode
+ iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 1: 1T.
+ 0: 2T, 1: 1T
+**/
+ UINT8 PchHdaIDispLinkTmode;
+
+/** Offset 0x036C - Universal Audio Architecture compliance for DSP enabled system
+ 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox
+ driver or SST driver supported).
+ $EN_DIS
+**/
+ UINT8 PchHdaDspUaaCompliance;
+
+/** Offset 0x036D - iDisplay Audio Codec disconnection
+ 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable.
+ $EN_DIS
+**/
+ UINT8 PchHdaIDispCodecDisconnect;
+
+/** Offset 0x036E - USB LFPS Filter selection
+ For each byte bits 2:0 are for p, bits 4:6 are for n. 0h:1.6ns, 1h:2.4ns, 2h:3.2ns,
+ 3h:4.0ns, 4h:4.8ns, 5h:5.6ns, 6h:6.4ns.
+**/
+ UINT8 PchUsbHsioFilterSel[10];
+
+/** Offset 0x0378
+**/
+ UINT8 UnusedUpdSpace11[5];
+
+/** Offset 0x037D - Enable PCH Io Apic Entry 24-119
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIoApicEntry24_119;
+
+/** Offset 0x037E - PCH Io Apic ID
+ This member determines IOAPIC ID. Default is 0x02.
+**/
+ UINT8 PchIoApicId;
+
+/** Offset 0x037F
+**/
+ UINT8 UnusedUpdSpace12;
+
+/** Offset 0x0380 - Enable PCH ISH SPI GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshSpiGpioAssign;
+
+/** Offset 0x0381 - Enable PCH ISH UART0 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshUart0GpioAssign;
+
+/** Offset 0x0382 - Enable PCH ISH UART1 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshUart1GpioAssign;
+
+/** Offset 0x0383 - Enable PCH ISH I2C0 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshI2c0GpioAssign;
+
+/** Offset 0x0384 - Enable PCH ISH I2C1 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshI2c1GpioAssign;
+
+/** Offset 0x0385 - Enable PCH ISH I2C2 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshI2c2GpioAssign;
+
+/** Offset 0x0386 - Enable PCH ISH GP_0 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp0GpioAssign;
+
+/** Offset 0x0387 - Enable PCH ISH GP_1 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp1GpioAssign;
+
+/** Offset 0x0388 - Enable PCH ISH GP_2 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp2GpioAssign;
+
+/** Offset 0x0389 - Enable PCH ISH GP_3 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp3GpioAssign;
+
+/** Offset 0x038A - Enable PCH ISH GP_4 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp4GpioAssign;
+
+/** Offset 0x038B - Enable PCH ISH GP_5 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp5GpioAssign;
+
+/** Offset 0x038C - Enable PCH ISH GP_6 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp6GpioAssign;
+
+/** Offset 0x038D - Enable PCH ISH GP_7 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp7GpioAssign;
+
+/** Offset 0x038E - PCH ISH PDT Unlock Msg
+ 0: False; 1: True.
+ $EN_DIS
+**/
+ UINT8 PchIshPdtUnlock;
+
+/** Offset 0x038F - Enable PCH Lan LTR capabilty of PCH internal LAN
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchLanLtrEnable;
+
+/** Offset 0x0390
+**/
+ UINT8 UnusedUpdSpace13[3];
+
+/** Offset 0x0393 - Enable LOCKDOWN BIOS LOCK
+ Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region
+ protection.
+ $EN_DIS
+**/
+ UINT8 PchLockDownBiosLock;
+
+/** Offset 0x0394 - PCH Compatibility Revision ID
+ This member describes whether or not the CRID feature of PCH should be enabled.
+ $EN_DIS
+**/
+ UINT8 PchCrid;
+
+/** Offset 0x0395 - RTC CMOS MEMORY LOCK
+ Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
+ and and lower 128-byte bank of RTC RAM.
+ $EN_DIS
+**/
+ UINT8 PchLockDownRtcMemoryLock;
+
+/** Offset 0x0396 - Enable PCIE RP HotPlug
+ Indicate whether the root port is hot plug available.
+**/
+ UINT8 PcieRpHotPlug[24];
+
+/** Offset 0x03AE - Enable PCIE RP Pm Sci
+ Indicate whether the root port power manager SCI is enabled.
+**/
+ UINT8 PcieRpPmSci[24];
+
+/** Offset 0x03C6 - Enable PCIE RP Ext Sync
+ Indicate whether the extended synch is enabled.
+**/
+ UINT8 PcieRpExtSync[24];
+
+/** Offset 0x03DE - Enable PCIE RP Transmitter Half Swing
+ Indicate whether the Transmitter Half Swing is enabled.
+**/
+ UINT8 PcieRpTransmitterHalfSwing[24];
+
+/** Offset 0x03F6 - Enable PCIE RP Clk Req Detect
+ Probe CLKREQ# signal before enabling CLKREQ# based power management.
+**/
+ UINT8 PcieRpClkReqDetect[24];
+
+/** Offset 0x040E - PCIE RP Advanced Error Report
+ Indicate whether the Advanced Error Reporting is enabled.
+**/
+ UINT8 PcieRpAdvancedErrorReporting[24];
+
+/** Offset 0x0426 - PCIE RP Unsupported Request Report
+ Indicate whether the Unsupported Request Report is enabled.
+**/
+ UINT8 PcieRpUnsupportedRequestReport[24];
+
+/** Offset 0x043E - PCIE RP Fatal Error Report
+ Indicate whether the Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpFatalErrorReport[24];
+
+/** Offset 0x0456 - PCIE RP No Fatal Error Report
+ Indicate whether the No Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpNoFatalErrorReport[24];
+
+/** Offset 0x046E - PCIE RP Correctable Error Report
+ Indicate whether the Correctable Error Report is enabled.
+**/
+ UINT8 PcieRpCorrectableErrorReport[24];
+
+/** Offset 0x0486 - PCIE RP System Error On Fatal Error
+ Indicate whether the System Error on Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnFatalError[24];
+
+/** Offset 0x049E - PCIE RP System Error On Non Fatal Error
+ Indicate whether the System Error on Non Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnNonFatalError[24];
+
+/** Offset 0x04B6 - PCIE RP System Error On Correctable Error
+ Indicate whether the System Error on Correctable Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnCorrectableError[24];
+
+/** Offset 0x04CE - PCIE RP Max Payload
+ Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD.
+**/
+ UINT8 PcieRpMaxPayload[24];
+
+/** Offset 0x04E6 - PCH USB3 RX HSIO Tuning parameters
+ Bits 7:3 are for Signed Magnatude number added to the CTLE code, Bits 2:0 are for
+ controlling the input offset
+**/
+ UINT8 PchUsbHsioRxTuningParameters[10];
+
+/** Offset 0x04F0 - PCH USB3 HSIO Rx Tuning Enable
+ Mask for enabling tuning of HSIO Rx signals of USB3 ports. Bits: 0 - HsioCtrlAdaptOffsetCfgEnable,
+ 1 - HsioFilterSelNEnable, 2 - HsioFilterSelPEnable, 3 - HsioOlfpsCfgPullUpDwnResEnable
+**/
+ UINT8 PchUsbHsioRxTuningEnable[10];
+
+/** Offset 0x04FA
+**/
+ UINT8 UnusedUpdSpace14[4];
+
+/** Offset 0x04FE - PCIE RP Pcie Speed
+ Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see:
+ PCH_PCIE_SPEED).
+**/
+ UINT8 PcieRpPcieSpeed[24];
+
+/** Offset 0x0516 - PCIE RP Gen3 Equalization Phase Method
+ PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
+ 1: hardware equalization; 4: Fixed Coeficients.
+**/
+ UINT8 PcieRpGen3EqPh3Method[24];
+
+/** Offset 0x052E - PCIE RP Physical Slot Number
+ Indicates the slot number for the root port. Default is the value as root port index.
+**/
+ UINT8 PcieRpPhysicalSlotNumber[24];
+
+/** Offset 0x0546 - PCIE RP Completion Timeout
+ The root port completion timeout(see: PCH_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default.
+**/
+ UINT8 PcieRpCompletionTimeout[24];
+
+/** Offset 0x055E
+**/
+ UINT8 UnusedUpdSpace15[106];
+
+/** Offset 0x05C8 - PCIE RP Aspm
+ The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is
+ PchPcieAspmAutoConfig.
+**/
+ UINT8 PcieRpAspm[24];
+
+/** Offset 0x05E0 - PCIE RP L1 Substates
+ The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL).
+ Default is PchPcieL1SubstatesL1_1_2.
+**/
+ UINT8 PcieRpL1Substates[24];
+
+/** Offset 0x05F8 - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 PcieRpLtrEnable[24];
+
+/** Offset 0x0610 - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PcieRpLtrConfigLock[24];
+
+/** Offset 0x0628 - PCIE Eq Ph3 Lane Param Cm
+ PCH_PCIE_EQ_LANE_PARAM. Coefficient C-1.
+**/
+ UINT8 PcieEqPh3LaneParamCm[24];
+
+/** Offset 0x0640 - PCIE Eq Ph3 Lane Param Cp
+ PCH_PCIE_EQ_LANE_PARAM. Coefficient C+1.
+**/
+ UINT8 PcieEqPh3LaneParamCp[24];
+
+/** Offset 0x0658 - PCIE Sw Eq CoeffList Cm
+ PCH_PCIE_EQ_PARAM. Coefficient C-1.
+**/
+ UINT8 PcieSwEqCoeffListCm[5];
+
+/** Offset 0x065D - PCIE Sw Eq CoeffList Cp
+ PCH_PCIE_EQ_PARAM. Coefficient C+1.
+**/
+ UINT8 PcieSwEqCoeffListCp[5];
+
+/** Offset 0x0662 - PCIE Disable RootPort Clock Gating
+ Describes whether the PCI Express Clock Gating for each root port is enabled by
+ platform modules. 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieDisableRootPortClockGating;
+
+/** Offset 0x0663 - PCIE Enable Peer Memory Write
+ This member describes whether Peer Memory Writes are enabled on the platform.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePeerMemoryWrite;
+
+/** Offset 0x0664
+**/
+ UINT8 UnusedUpdSpace16;
+
+/** Offset 0x0665 - PCIE Compliance Test Mode
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ $EN_DIS
+**/
+ UINT8 PcieComplianceTestMode;
+
+/** Offset 0x0666 - PCIE Rp Function Swap
+ Allows BIOS to use root port function number swapping when root port of function
+ 0 is disabled.
+ $EN_DIS
+**/
+ UINT8 PcieRpFunctionSwap;
+
+/** Offset 0x0667 - Teton Glacier Support
+ Enables support for the Teton Glacier card.
+ $EN_DIS
+**/
+ UINT8 TetonGlacierSupport;
+
+/** Offset 0x0668 - Teton Glacier Cycle Router
+ Specify to which cycle router Teton Glacier is connected, it is valid only when
+ Teton Glacier support is enabled. Default is 0 for CNP-H system and 1 for CNP-LP system
+**/
+ UINT8 TetonGlacierCR;
+
+/** Offset 0x0669 - PCH Pm PME_B0_S5_DIS
+ When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1.
+ $EN_DIS
+**/
+ UINT8 PchPmPmeB0S5Dis;
+
+/** Offset 0x066A - SPI ChipSelect signal polarity
+ Selects SPI ChipSelect signal polarity.
+**/
+ UINT8 SerialIoSpiCsPolarity[3];
+
+/** Offset 0x066D - PCIE IMR
+ Enables Isolated Memory Region for PCIe.
+ $EN_DIS
+**/
+ UINT8 PcieRpImrEnabled;
+
+/** Offset 0x066E - PCIE IMR port number
+ Selects PCIE root port number for IMR feature.
+**/
+ UINT8 PcieRpImrSelection;
+
+/** Offset 0x066F
+**/
+ UINT8 UnusedUpdSpace17;
+
+/** Offset 0x0670 - PCH Pm Wol Enable Override
+ Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolEnableOverride;
+
+/** Offset 0x0671 - PCH Pm Pcie Wake From DeepSx
+ Determine if enable PCIe to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmPcieWakeFromDeepSx;
+
+/** Offset 0x0672 - PCH Pm WoW lan Enable
+ Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanEnable;
+
+/** Offset 0x0673 - PCH Pm WoW lan DeepSx Enable
+ Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the
+ PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanDeepSxEnable;
+
+/** Offset 0x0674 - PCH Pm Lan Wake From DeepSx
+ Determine if enable LAN to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmLanWakeFromDeepSx;
+
+/** Offset 0x0675 - PCH Pm Deep Sx Pol
+ Deep Sx Policy.
+ $EN_DIS
+**/
+ UINT8 PchPmDeepSxPol;
+
+/** Offset 0x0676 - PCH Pm Slp S3 Min Assert
+ SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms.
+**/
+ UINT8 PchPmSlpS3MinAssert;
+
+/** Offset 0x0677 - PCH Pm Slp S4 Min Assert
+ SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s.
+**/
+ UINT8 PchPmSlpS4MinAssert;
+
+/** Offset 0x0678 - PCH Pm Slp Sus Min Assert
+ SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s.
+**/
+ UINT8 PchPmSlpSusMinAssert;
+
+/** Offset 0x0679 - PCH Pm Slp A Min Assert
+ SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s.
+**/
+ UINT8 PchPmSlpAMinAssert;
+
+/** Offset 0x067A - SLP_S0# Override
+ Select 'Auto', it will be auto-configured according to probe type. Select 'Enabled'
+ will disable SLP_S0# assertion whereas 'Disabled' will enable SLP_S0# assertion
+ when debug is enabled. \n
+ Note: This BIOS option should keep 'Auto', other options are intended for advanced
+ configuration only.
+ 0:Disabled, 1:Enabled, 2:Auto
+**/
+ UINT8 SlpS0Override;
+
+/** Offset 0x067B - S0ix Override Settings
+ Select 'Auto', it will be auto-configured according to probe type. 'No Change' will
+ keep PMC default settings. Or select the desired debug probe type for S0ix Override
+ settings.\n
+ Reminder: DCI OOB (aka BSSB) uses CCA probe.\n
+ Note: This BIOS option should keep 'Auto', other options are intended for advanced
+ configuration only.
+ 0:No Change, 1:DCI OOB, 2:USB2 DbC, 3:Auto
+**/
+ UINT8 SlpS0DisQForDebug;
+
+/** Offset 0x067C - USB Overcurrent Override for DbC
+ This option overrides USB Over Current enablement state that USB OC will be disabled
+ after enabling this option. Enable when DbC is used to avoid signaling conflicts.
+ $EN_DIS
+**/
+ UINT8 PchEnableDbcObs;
+
+/** Offset 0x067D
+**/
+ UINT8 UnusedUpdSpace18[3];
+
+/** Offset 0x0680 - PCH Pm Lpc Clock Run
+ This member describes whether or not the LPC ClockRun feature of PCH should be enabled.
+ Default value is Disabled
+ $EN_DIS
+**/
+ UINT8 PchPmLpcClockRun;
+
+/** Offset 0x0681 - PCH Pm Slp Strch Sus Up
+ Enable SLP_X Stretching After SUS Well Power Up.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpStrchSusUp;
+
+/** Offset 0x0682 - PCH Pm Slp Lan Low Dc
+ Enable/Disable SLP_LAN# Low on DC Power.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpLanLowDc;
+
+/** Offset 0x0683 - PCH Pm Pwr Btn Override Period
+ PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.
+**/
+ UINT8 PchPmPwrBtnOverridePeriod;
+
+/** Offset 0x0684 - PCH Pm Disable Dsx Ac Present Pulldown
+ When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableDsxAcPresentPulldown;
+
+/** Offset 0x0685
+**/
+ UINT8 UnusedUpdSpace19;
+
+/** Offset 0x0686 - PCH Pm Disable Native Power Button
+ Power button native mode disable.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableNativePowerButton;
+
+/** Offset 0x0687 - PCH Pm Slp S0 Enable
+ Indicates whether SLP_S0# is to be asserted when PCH reaches idle state.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpS0Enable;
+
+/** Offset 0x0688 - PCH Pm ME_WAKE_STS
+ Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmMeWakeSts;
+
+/** Offset 0x0689 - PCH Pm WOL_OVR_WK_STS
+ Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolOvrWkSts;
+
+/** Offset 0x068A - PCH Pm Reset Power Cycle Duration
+ Could be customized in the unit of second. Please refer to EDS for all support settings.
+ 0 is default, 1 is 1 second, 2 is 2 seconds, ...
+**/
+ UINT8 PchPmPwrCycDur;
+
+/** Offset 0x068B - PCH Pm Pcie Pll Ssc
+ Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No
+ BIOS override.
+**/
+ UINT8 PchPmPciePllSsc;
+
+/** Offset 0x068C
+**/
+ UINT8 UnusedUpdSpace20;
+
+/** Offset 0x068D - PCH Sata Pwr Opt Enable
+ SATA Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 SataPwrOptEnable;
+
+/** Offset 0x068E - PCH Sata eSATA Speed Limit
+ When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed.
+ $EN_DIS
+**/
+ UINT8 EsataSpeedLimit;
+
+/** Offset 0x068F - PCH Sata Speed Limit
+ Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault.
+**/
+ UINT8 SataSpeedLimit;
+
+/** Offset 0x0690 - Enable SATA Port HotPlug
+ Enable SATA Port HotPlug.
+**/
+ UINT8 SataPortsHotPlug[8];
+
+/** Offset 0x0698 - Enable SATA Port Interlock Sw
+ Enable SATA Port Interlock Sw.
+**/
+ UINT8 SataPortsInterlockSw[8];
+
+/** Offset 0x06A0 - Enable SATA Port External
+ Enable SATA Port External.
+**/
+ UINT8 SataPortsExternal[8];
+
+/** Offset 0x06A8 - Enable SATA Port SpinUp
+ Enable the COMRESET initialization Sequence to the device.
+**/
+ UINT8 SataPortsSpinUp[8];
+
+/** Offset 0x06B0 - Enable SATA Port Solid State Drive
+ 0: HDD; 1: SSD.
+**/
+ UINT8 SataPortsSolidStateDrive[8];
+
+/** Offset 0x06B8 - Enable SATA Port Enable Dito Config
+ Enable DEVSLP Idle Timeout settings (DmVal, DitoVal).
+**/
+ UINT8 SataPortsEnableDitoConfig[8];
+
+/** Offset 0x06C0 - Enable SATA Port DmVal
+ DITO multiplier. Default is 15.
+**/
+ UINT8 SataPortsDmVal[8];
+
+/** Offset 0x06C8 - Enable SATA Port DmVal
+ DEVSLP Idle Timeout (DITO), Default is 625.
+**/
+ UINT16 SataPortsDitoVal[8];
+
+/** Offset 0x06D8 - Enable SATA Port ZpOdd
+ Support zero power ODD.
+**/
+ UINT8 SataPortsZpOdd[8];
+
+/** Offset 0x06E0 - PCH Sata Rst Raid Device Id
+ Enable RAID Alternate ID.
+ 0:Client, 1:Alternate, 2:Server
+**/
+ UINT8 SataRstRaidDeviceId;
+
+/** Offset 0x06E1 - PCH Sata Rst Raid0
+ RAID0.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid0;
+
+/** Offset 0x06E2 - PCH Sata Rst Raid1
+ RAID1.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid1;
+
+/** Offset 0x06E3 - PCH Sata Rst Raid10
+ RAID10.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid10;
+
+/** Offset 0x06E4 - PCH Sata Rst Raid5
+ RAID5.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid5;
+
+/** Offset 0x06E5 - PCH Sata Rst Irrt
+ Intel Rapid Recovery Technology.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrt;
+
+/** Offset 0x06E6 - PCH Sata Rst Orom Ui Banner
+ OROM UI and BANNER.
+ $EN_DIS
+**/
+ UINT8 SataRstOromUiBanner;
+
+/** Offset 0x06E7 - PCH Sata Rst Orom Ui Delay
+ 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY).
+**/
+ UINT8 SataRstOromUiDelay;
+
+/** Offset 0x06E8 - PCH Sata Rst Hdd Unlock
+ Indicates that the HDD password unlock in the OS is enabled.
+ $EN_DIS
+**/
+ UINT8 SataRstHddUnlock;
+
+/** Offset 0x06E9 - PCH Sata Rst Led Locate
+ Indicates that the LED/SGPIO hardware is attached and ping to locate feature is
+ enabled on the OS.
+ $EN_DIS
+**/
+ UINT8 SataRstLedLocate;
+
+/** Offset 0x06EA - PCH Sata Rst Irrt Only
+ Allow only IRRT drives to span internal and external ports.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrtOnly;
+
+/** Offset 0x06EB - PCH Sata Rst Smart Storage
+ RST Smart Storage caching Bit.
+ $EN_DIS
+**/
+ UINT8 SataRstSmartStorage;
+
+/** Offset 0x06EC - PCH Sata Rst Pcie Storage Remap enable
+ Enable Intel RST for PCIe Storage remapping.
+**/
+ UINT8 SataRstPcieEnable[3];
+
+/** Offset 0x06EF - PCH Sata Rst Pcie Storage Port
+ Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect).
+**/
+ UINT8 SataRstPcieStoragePort[3];
+
+/** Offset 0x06F2 - PCH Sata Rst Pcie Device Reset Delay
+ PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
+**/
+ UINT8 SataRstPcieDeviceResetDelay[3];
+
+/** Offset 0x06F5 - Enable eMMC HS400 Training
+ Deprecated.
+ $EN_DIS
+**/
+ UINT8 PchScsEmmcHs400TuningRequired;
+
+/** Offset 0x06F6 - Set HS400 Tuning Data Valid
+ Set if HS400 Tuning Data Valid.
+ $EN_DIS
+**/
+ UINT8 PchScsEmmcHs400DllDataValid;
+
+/** Offset 0x06F7 - Rx Strobe Delay Control
+ Rx Strobe Delay Control - Rx Strobe Delay DLL 1 (HS400 Mode).
+**/
+ UINT8 PchScsEmmcHs400RxStrobeDll1;
+
+/** Offset 0x06F8 - Tx Data Delay Control
+ Tx Data Delay Control 1 - Tx Data Delay (HS400 Mode).
+**/
+ UINT8 PchScsEmmcHs400TxDataDll;
+
+/** Offset 0x06F9 - I/O Driver Strength
+ Deprecated.
+ 0:33 Ohm, 1:40 Ohm, 2:50 Ohm
+**/
+ UINT8 PchScsEmmcHs400DriverStrength;
+
+/** Offset 0x06FA - PCH SerialIo I2C Pads Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5
+ pads termination respectively. One byte for each controller, byte0 for I2C0, byte1
+ for I2C1, and so on.
+**/
+ UINT8 PchSerialIoI2cPadsTermination[6];
+
+/** Offset 0x0700
+**/
+ UINT8 UnusedUpdSpace21;
+
+/** Offset 0x0701 - PcdSerialIoUart0PinMuxing
+ Select SerialIo Uart0 pin muxing. Setting applicable only if SerialIO UART0 is enabled.
+ 0:default pins, 1:pins muxed with CNV_BRI/RGI
+**/
+ UINT8 SerialIoUart0PinMuxing;
+
+/** Offset 0x0702
+**/
+ UINT8 UnusedUpdSpace22[1];
+
+/** Offset 0x0703 - Enables UART hardware flow control, CTS and RTS lines
+ Enables UART hardware flow control, CTS and RTS linesh.
+**/
+ UINT8 SerialIoUartHwFlowCtrl[3];
+
+/** Offset 0x0706 - UART Number For Debug Purpose
+ UART number for debug purpose. 0:UART0, 1: UART1, 2:UART2. Note: If UART0 is selected
+ as CNVi BT Core interface, it cannot be used for debug purpose.
+ 0:UART0, 1:UART1, 2:UART2
+**/
+ UINT8 SerialIoDebugUartNumber;
+
+/** Offset 0x0707 - Enable Debug UART Controller
+ Enable debug UART controller after post.
+ $EN_DIS
+**/
+ UINT8 SerialIoEnableDebugUartAfterPost;
+
+/** Offset 0x0708 - Enable Serial IRQ
+ Determines if enable Serial IRQ.
+ $EN_DIS
+**/
+ UINT8 PchSirqEnable;
+
+/** Offset 0x0709 - Serial IRQ Mode Select
+ Serial IRQ Mode Select, 0: quiet mode, 1: continuous mode.
+ $EN_DIS
+**/
+ UINT8 PchSirqMode;
+
+/** Offset 0x070A - Start Frame Pulse Width
+ Start Frame Pulse Width, 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk.
+ 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk
+**/
+ UINT8 PchStartFramePulse;
+
+/** Offset 0x070B - Reserved
+ Reserved
+ $EN_DIS
+**/
+ UINT8 ReservedForFuture1;
+
+/** Offset 0x070C - Thermal Device SMI Enable
+ This locks down SMI Enable on Alert Thermal Sensor Trip.
+ $EN_DIS
+**/
+ UINT8 PchTsmicLock;
+
+/** Offset 0x070D - Thermal Throttling Custimized T0Level Value
+ Custimized T0Level value.
+**/
+ UINT16 PchT0Level;
+
+/** Offset 0x070F - Thermal Throttling Custimized T1Level Value
+ Custimized T1Level value.
+**/
+ UINT16 PchT1Level;
+
+/** Offset 0x0711 - Thermal Throttling Custimized T2Level Value
+ Custimized T2Level value.
+**/
+ UINT16 PchT2Level;
+
+/** Offset 0x0713 - Enable The Thermal Throttle
+ Enable the thermal throttle function.
+ $EN_DIS
+**/
+ UINT8 PchTTEnable;
+
+/** Offset 0x0714 - PMSync State 13
+ When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force
+ at least T2 state.
+ $EN_DIS
+**/
+ UINT8 PchTTState13Enable;
+
+/** Offset 0x0715 - Thermal Throttle Lock
+ Thermal Throttle Lock.
+ $EN_DIS
+**/
+ UINT8 PchTTLock;
+
+/** Offset 0x0716 - Thermal Throttling Suggested Setting
+ Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 TTSuggestedSetting;
+
+/** Offset 0x0717 - Enable PCH Cross Throttling
+ Enable/Disable PCH Cross Throttling
+ $EN_DIS
+**/
+ UINT8 TTCrossThrottling;
+
+/** Offset 0x0718 - DMI Thermal Sensor Autonomous Width Enable
+ DMI Thermal Sensor Autonomous Width Enable.
+ $EN_DIS
+**/
+ UINT8 PchDmiTsawEn;
+
+/** Offset 0x0719 - DMI Thermal Sensor Suggested Setting
+ DMT thermal sensor suggested representative values.
+ $EN_DIS
+**/
+ UINT8 DmiSuggestedSetting;
+
+/** Offset 0x071A - Thermal Sensor 0 Target Width
+ DMT thermal sensor suggested representative values.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS0TW;
+
+/** Offset 0x071B - Thermal Sensor 1 Target Width
+ Thermal Sensor 1 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS1TW;
+
+/** Offset 0x071C - Thermal Sensor 2 Target Width
+ Thermal Sensor 2 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS2TW;
+
+/** Offset 0x071D - Thermal Sensor 3 Target Width
+ Thermal Sensor 3 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS3TW;
+
+/** Offset 0x071E - Port 0 T1 Multipler
+ Port 0 T1 Multipler.
+**/
+ UINT8 SataP0T1M;
+
+/** Offset 0x071F - Port 0 T2 Multipler
+ Port 0 T2 Multipler.
+**/
+ UINT8 SataP0T2M;
+
+/** Offset 0x0720 - Port 0 T3 Multipler
+ Port 0 T3 Multipler.
+**/
+ UINT8 SataP0T3M;
+
+/** Offset 0x0721 - Port 0 Tdispatch
+ Port 0 Tdispatch.
+**/
+ UINT8 SataP0TDisp;
+
+/** Offset 0x0722 - Port 1 T1 Multipler
+ Port 1 T1 Multipler.
+**/
+ UINT8 SataP1T1M;
+
+/** Offset 0x0723 - Port 1 T2 Multipler
+ Port 1 T2 Multipler.
+**/
+ UINT8 SataP1T2M;
+
+/** Offset 0x0724 - Port 1 T3 Multipler
+ Port 1 T3 Multipler.
+**/
+ UINT8 SataP1T3M;
+
+/** Offset 0x0725 - Port 1 Tdispatch
+ Port 1 Tdispatch.
+**/
+ UINT8 SataP1TDisp;
+
+/** Offset 0x0726 - Port 0 Tinactive
+ Port 0 Tinactive.
+**/
+ UINT8 SataP0Tinact;
+
+/** Offset 0x0727 - Port 0 Alternate Fast Init Tdispatch
+ Port 0 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP0TDispFinit;
+
+/** Offset 0x0728 - Port 1 Tinactive
+ Port 1 Tinactive.
+**/
+ UINT8 SataP1Tinact;
+
+/** Offset 0x0729 - Port 1 Alternate Fast Init Tdispatch
+ Port 1 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP1TDispFinit;
+
+/** Offset 0x072A - Sata Thermal Throttling Suggested Setting
+ Sata Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 SataThermalSuggestedSetting;
+
+/** Offset 0x072B - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+ $EN_DIS
+**/
+ UINT8 PchMemoryThrottlingEnable;
+
+/** Offset 0x072C - Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPmsyncEnable[2];
+
+/** Offset 0x072E - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryC0TransmitEnable[2];
+
+/** Offset 0x0730 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPinSelection[2];
+
+/** Offset 0x0732 - Thermal Device Temperature
+ Decides the temperature.
+**/
+ UINT16 PchTemperatureHotLevel;
+
+/** Offset 0x0734 - Enable xHCI Compliance Mode
+ Compliance Mode can be enabled for testing through this option but this is disabled
+ by default.
+ $EN_DIS
+**/
+ UINT8 PchEnableComplianceMode;
+
+/** Offset 0x0735 - USB2 Port Over Current Pin
+ Describe the specific over current pin number of USB 2.0 Port N.
+**/
+ UINT8 Usb2OverCurrentPin[16];
+
+/** Offset 0x0745 - USB3 Port Over Current Pin
+ Describe the specific over current pin number of USB 3.0 Port N.
+**/
+ UINT8 Usb3OverCurrentPin[10];
+
+/** Offset 0x074F - Enable 8254 Static Clock Gating
+ Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time
+ might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support
+ boot legacy OS using 8254 timer. Also enable this while S0ix is enabled.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGating;
+
+/** Offset 0x0750 - PCH Sata Rst Optane Memory
+ Optane Memory
+ $EN_DIS
+**/
+ UINT8 SataRstOptaneMemory;
+
+/** Offset 0x0751 - PCH Sata Rst CPU Attached Storage
+ CPU Attached Storage
+ $EN_DIS
+**/
+ UINT8 SataRstCpuAttachedStorage;
+
+/** Offset 0x0752 - Enable 8254 Static Clock Gating On S3
+ This is only applicable when Enable8254ClockGating is disabled. FSP will do the
+ 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This
+ avoids the SMI requirement for the programming.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGatingOnS3;
+
+/** Offset 0x0753
+**/
+ UINT8 UnusedUpdSpace23;
+
+/** Offset 0x0754 - Pch PCIE device override table pointer
+ The PCIe device table is being used to override PCIe device ASPM settings. This
+ is a pointer points to a 32bit address. And it's only used in PostMem phase. Please
+ refer to PCH_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId
+ must be 0.
+**/
+ UINT32 PchPcieDeviceOverrideTablePtr;
+
+/** Offset 0x0758 - Enable TCO timer.
+ When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have
+ huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer
+ emulation must be enabled, and WDAT table must not be exposed to the OS.
+ $EN_DIS
+**/
+ UINT8 EnableTcoTimer;
+
+/** Offset 0x0759 - BgpdtHash[4]
+ BgpdtHash values
+**/
+ UINT64 BgpdtHash[4];
+
+/** Offset 0x0779 - BiosGuardAttr
+ BiosGuardAttr default values
+**/
+ UINT32 BiosGuardAttr;
+
+/** Offset 0x077D - BiosGuardModulePtr
+ BiosGuardModulePtr default values
+**/
+ UINT64 BiosGuardModulePtr;
+
+/** Offset 0x0785 - SendEcCmd
+ SendEcCmd function pointer. \n
+ @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE
+ EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode
+**/
+ UINT64 SendEcCmd;
+
+/** Offset 0x078D - EcCmdProvisionEav
+ Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC
+**/
+ UINT8 EcCmdProvisionEav;
+
+/** Offset 0x078E - EcCmdLock
+ EcCmdLock default values. Locks Ephemeral Authorization Value sent previously
+**/
+ UINT8 EcCmdLock;
+
+/** Offset 0x078F - SgxEpoch0
+ SgxEpoch0 default values
+**/
+ UINT64 SgxEpoch0;
+
+/** Offset 0x0797 - SgxEpoch1
+ SgxEpoch1 default values
+**/
+ UINT64 SgxEpoch1;
+
+/** Offset 0x079F - SgxSinitNvsData
+ SgxSinitNvsData default values
+**/
+ UINT8 SgxSinitNvsData;
+
+/** Offset 0x07A0 - Si Config CSM Flag.
+ Platform specific common policies that used by several silicon components. CSM status flag.
+ $EN_DIS
+**/
+ UINT8 SiCsmFlag;
+
+/** Offset 0x07A1
+**/
+ UINT32 SiSsidTablePtr;
+
+/** Offset 0x07A5
+**/
+ UINT16 SiNumberOfSsidTableEntry;
+
+/** Offset 0x07A7 - SATA RST Interrupt Mode
+ Allowes to choose which interrupts will be implemented by SATA controller in RAID mode.
+ 0:Msix, 1:Msi, 2:Legacy
+**/
+ UINT8 SataRstInterrupt;
+
+/** Offset 0x07A8 - ME Unconfig on RTC clear
+ 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>.
+ 2: Cmos is clear, status unkonwn. 3: Reserved
+ 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos
+ is clear, 3: Reserved
+**/
+ UINT8 MeUnconfigOnRtcClear;
+
+/** Offset 0x07A9 - Enable PS_ON.
+ PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power
+ target that will be required by the California Energy Commission (CEC). When FALSE,
+ PS_ON is to be disabled.
+ $EN_DIS
+**/
+ UINT8 PsOnEnable;
+
+/** Offset 0x07AA - Pmc Cpu C10 Gate Pin Enable
+ Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO
+ and VccSTG rails instead of SLP_S0# pin.
+ $EN_DIS
+**/
+ UINT8 PmcCpuC10GatePinEnable;
+
+/** Offset 0x07AB - Pch Dmi Aspm Ctrl
+ ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b>
+ 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto
+**/
+ UINT8 PchDmiAspmCtrl;
+
+/** Offset 0x07AC
+**/
+ UINT8 ReservedFspsUpd[1];
+} FSP_S_CONFIG;
+
+/** Fsp S Test Configuration
+**/
+typedef struct {
+
+/** Offset 0x07AD
+**/
+ UINT32 Signature;
+
+/** Offset 0x07B1 - Enable/Disable Device 7
+ Enable: Device 7 enabled, Disable (Default): Device 7 disabled
+ $EN_DIS
+**/
+ UINT8 ChapDeviceEnable;
+
+/** Offset 0x07B2 - Skip PAM register lock
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ $EN_DIS
+**/
+ UINT8 SkipPamLock;
+
+/** Offset 0x07B3 - EDRAM Test Mode
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode
+**/
+ UINT8 EdramTestMode;
+
+/** Offset 0x07B4 - DMI Extended Sync Control
+ Enable: Enable DMI Extended Sync Control, Disable(Default): Disable DMI Extended
+ Sync Control
+ $EN_DIS
+**/
+ UINT8 DmiExtSync;
+
+/** Offset 0x07B5 - DMI IOT Control
+ Enable: Enable DMI IOT Control, Disable(Default): Disable DMI IOT Control
+ $EN_DIS
+**/
+ UINT8 DmiIot;
+
+/** Offset 0x07B6 - PEG Max Payload size per root port
+ 0xFF(Default):Auto, 0x1: Force 128B, 0x2: Force 256B
+ 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B
+**/
+ UINT8 PegMaxPayload[4];
+
+/** Offset 0x07BA - Enable/Disable IGFX RenderStandby
+ Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby
+ $EN_DIS
+**/
+ UINT8 RenderStandby;
+
+/** Offset 0x07BB - Enable/Disable IGFX PmSupport
+ Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport
+ $EN_DIS
+**/
+ UINT8 PmSupport;
+
+/** Offset 0x07BC - Enable/Disable CdynmaxClamp
+ Enable(Default): Enable CdynmaxClamp, Disable: Disable CdynmaxClamp
+ $EN_DIS
+**/
+ UINT8 CdynmaxClampEnable;
+
+/** Offset 0x07BD - Disable VT-d
+ 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled)
+ $EN_DIS
+**/
+ UINT8 VtdDisable;
+
+/** Offset 0x07BE - GT Frequency Limit
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+**/
+ UINT8 GtFreqMax;
+
+/** Offset 0x07BF - Disable Turbo GT
+ 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency
+ $EN_DIS
+**/
+ UINT8 DisableTurboGt;
+
+/** Offset 0x07C0 - SaPostMemTestRsvd
+ Reserved for SA Post-Mem Test
+ $EN_DIS
+**/
+ UINT8 SaPostMemTestRsvd[11];
+
+/** Offset 0x07CB - 1-Core Ratio Limit
+ 1-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 1-Core
+ Ratio Limit Must be greater than or equal to 2-Core Ratio Limit, 3-Core Ratio Limit,
+ 4-Core Ratio Limit, 5-Core Ratio Limit, 6-Core Ratio Limit, 7-Core Ratio Limit,
+ 8-Core Ratio Limit. Range is 0 to 255
+**/
+ UINT8 OneCoreRatioLimit;
+
+/** Offset 0x07CC - 2-Core Ratio Limit
+ 2-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 2-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+**/
+ UINT8 TwoCoreRatioLimit;
+
+/** Offset 0x07CD - 3-Core Ratio Limit
+ 3-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 3-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+**/
+ UINT8 ThreeCoreRatioLimit;
+
+/** Offset 0x07CE - 4-Core Ratio Limit
+ 4-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 4-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+**/
+ UINT8 FourCoreRatioLimit;
+
+/** Offset 0x07CF - Enable or Disable HWP
+ Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b>
+ 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 Hwp;
+
+/** Offset 0x07D0 - Hardware Duty Cycle Control
+ Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 HdcControl;
+
+/** Offset 0x07D1 - Package Long duration turbo mode time
+ Package Long duration turbo mode time window in seconds. 0 = AUTO, uses 28 seconds.
+ Valid values(Unit in seconds) 1 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40
+ , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PowerLimit1Time;
+
+/** Offset 0x07D2 - Short Duration Turbo Mode
+ Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PowerLimit2;
+
+/** Offset 0x07D3 - Turbo settings Lock
+ Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 TurboPowerLimitLock;
+
+/** Offset 0x07D4 - Package PL3 time window
+ Package PL3 time window range for this policy from 0 to 64ms
+**/
+ UINT8 PowerLimit3Time;
+
+/** Offset 0x07D5 - Package PL3 Duty Cycle
+ Package PL3 Duty Cycle; Valid Range is 0 to 100
+**/
+ UINT8 PowerLimit3DutyCycle;
+
+/** Offset 0x07D6 - Package PL3 Lock
+ Package PL3 Lock Enable/Disable; <b>0: Disable ; <b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit3Lock;
+
+/** Offset 0x07D7 - Package PL4 Lock
+ Package PL4 Lock Enable/Disable; <b>0: Disable ; <b>1: Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit4Lock;
+
+/** Offset 0x07D8 - TCC Activation Offset
+ TCC Activation Offset. Offset from factory set TCC activation temperature at which
+ the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation
+ Temperature, in volts.For Y SKU, the recommended default for this policy is <b>15</b>,
+ For all other SKUs the recommended default are <b>0</b>
+**/
+ UINT8 TccActivationOffset;
+
+/** Offset 0x07D9 - Tcc Offset Clamp Enable/Disable
+ Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle
+ below P1.For Y SKU, the recommended default for this policy is <b>1: Enabled</b>,
+ For all other SKUs the recommended default are <b>0: Disabled</b>.
+ $EN_DIS
+**/
+ UINT8 TccOffsetClamp;
+
+/** Offset 0x07DA - Tcc Offset Lock
+ Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature
+ target; <b>0: Disabled</b>; 1: Enabled.
+ $EN_DIS
+**/
+ UINT8 TccOffsetLock;
+
+/** Offset 0x07DB - Custom Ratio State Entries
+ The number of custom ratio state entries, ranges from 0 to 40 for a valid custom
+ ratio table.Sets the number of custom P-states. At least 2 states must be present
+**/
+ UINT8 NumberOfEntries;
+
+/** Offset 0x07DC - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 1. Valid Range 0
+ to 128, 0 = AUTO
+**/
+ UINT8 Custom1PowerLimit1Time;
+
+/** Offset 0x07DD - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255
+**/
+ UINT8 Custom1TurboActivationRatio;
+
+/** Offset 0x07DE - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom1ConfigTdpControl;
+
+/** Offset 0x07DF - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 2. Valid Range 0
+ to 128, 0 = AUTO
+**/
+ UINT8 Custom2PowerLimit1Time;
+
+/** Offset 0x07E0 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255
+**/
+ UINT8 Custom2TurboActivationRatio;
+
+/** Offset 0x07E1 - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom2ConfigTdpControl;
+
+/** Offset 0x07E2 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 3. Valid Range 0
+ to 128, 0 = AUTO
+**/
+ UINT8 Custom3PowerLimit1Time;
+
+/** Offset 0x07E3 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255
+**/
+ UINT8 Custom3TurboActivationRatio;
+
+/** Offset 0x07E4 - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom3ConfigTdpControl;
+
+/** Offset 0x07E5 - ConfigTdp mode settings Lock
+ Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ConfigTdpLock;
+
+/** Offset 0x07E6 - Load Configurable TDP SSDT
+ Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ConfigTdpBios;
+
+/** Offset 0x07E7 - PL1 Enable value
+ PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit1;
+
+/** Offset 0x07E8 - PL1 timewindow
+ PL1 timewindow in seconds. 0 = AUTO, uses 28 seconds. Valid values(Unit in seconds)
+ 1 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PsysPowerLimit1Time;
+
+/** Offset 0x07E9 - PL2 Enable Value
+ PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit2;
+
+/** Offset 0x07EA - Enable or Disable MLC Streamer Prefetcher
+ Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MlcStreamerPrefetcher;
+
+/** Offset 0x07EB - Enable or Disable MLC Spatial Prefetcher
+ Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 MlcSpatialPrefetcher;
+
+/** Offset 0x07EC - Enable or Disable Monitor /MWAIT instructions
+ Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MonitorMwaitEnable;
+
+/** Offset 0x07ED - Enable or Disable initialization of machine check registers
+ Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MachineCheckEnable;
+
+/** Offset 0x07EE - Deprecated DO NOT USE Enable or Disable processor debug features
+ @deprecated Enable or Disable processor debug features; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 DebugInterfaceEnable;
+
+/** Offset 0x07EF - Lock or Unlock debug interface features
+ Lock or Unlock debug interface features; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DebugInterfaceLockEnable;
+
+/** Offset 0x07F0 - AP Idle Manner of waiting for SIPI
+ AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop.
+ 1: HALT loop, 2: MWAIT loop, 3: RUN loop
+**/
+ UINT8 ApIdleManner;
+
+/** Offset 0x07F1 - Control on Processor Trace output scheme
+ Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output.
+ 0: Single Range Output, 1: ToPA Output
+**/
+ UINT8 ProcessorTraceOutputScheme;
+
+/** Offset 0x07F2 - Enable or Disable Processor Trace feature
+ Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcessorTraceEnable;
+
+/** Offset 0x07F3 - Base of memory region allocated for Processor Trace
+ Base address of memory region allocated for Processor Trace. Processor Trace requires
+ 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT64 ProcessorTraceMemBase;
+
+/** Offset 0x07FB - Memory region allocation for Processor Trace
+ Length in bytes of memory region allocated for Processor Trace. Processor Trace
+ requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT32 ProcessorTraceMemLength;
+
+/** Offset 0x07FF - Enable or Disable Voltage Optimization feature
+ Enable or Disable Voltage Optimization feature 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 VoltageOptimization;
+
+/** Offset 0x0800 - Enable or Disable Intel SpeedStep Technology
+ Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Eist;
+
+/** Offset 0x0801 - Enable or Disable Energy Efficient P-state
+ Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientPState;
+
+/** Offset 0x0802 - Enable or Disable Energy Efficient Turbo
+ Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientTurbo;
+
+/** Offset 0x0803 - Enable or Disable T states
+ Enable or Disable T states; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 TStates;
+
+/** Offset 0x0804 - Enable or Disable Bi-Directional PROCHOT#
+ Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 BiProcHot;
+
+/** Offset 0x0805 - Enable or Disable PROCHOT# signal being driven externally
+ Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DisableProcHotOut;
+
+/** Offset 0x0806 - Enable or Disable PROCHOT# Response
+ Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcHotResponse;
+
+/** Offset 0x0807 - Enable or Disable VR Thermal Alert
+ Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 DisableVrThermalAlert;
+
+/** Offset 0x0808 - Enable or Disable Thermal Reporting
+ Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 AutoThermalReporting;
+
+/** Offset 0x0809 - Enable or Disable Thermal Monitor
+ Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 ThermalMonitor;
+
+/** Offset 0x080A - Enable or Disable CPU power states (C-states)
+ Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Cx;
+
+/** Offset 0x080B - Configure C-State Configuration Lock
+ Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 PmgCstCfgCtrlLock;
+
+/** Offset 0x080C - Enable or Disable Enhanced C-states
+ Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1e;
+
+/** Offset 0x080D - Enable or Disable Package Cstate Demotion
+ Enable or Disable Package Cstate Demotion. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 PkgCStateDemotion;
+
+/** Offset 0x080E - Enable or Disable Package Cstate UnDemotion
+ Enable or Disable Package Cstate UnDemotion. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 PkgCStateUnDemotion;
+
+/** Offset 0x080F - Enable or Disable CState-Pre wake
+ Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 CStatePreWake;
+
+/** Offset 0x0810 - Enable or Disable TimedMwait Support.
+ Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 TimedMwait;
+
+/** Offset 0x0811 - Enable or Disable IO to MWAIT redirection
+ Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CstCfgCtrIoMwaitRedirection;
+
+/** Offset 0x0812 - Set the Max Pkg Cstate
+ Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep
+ C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S ,
+ 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto
+**/
+ UINT8 PkgCStateLimit;
+
+/** Offset 0x0813 - TimeUnit for C-State Latency Control0
+ TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl0TimeUnit;
+
+/** Offset 0x0814 - TimeUnit for C-State Latency Control1
+ TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl1TimeUnit;
+
+/** Offset 0x0815 - TimeUnit for C-State Latency Control2
+ TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl2TimeUnit;
+
+/** Offset 0x0816 - TimeUnit for C-State Latency Control3
+ TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl3TimeUnit;
+
+/** Offset 0x0817 - TimeUnit for C-State Latency Control4
+ Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl4TimeUnit;
+
+/** Offset 0x0818 - TimeUnit for C-State Latency Control5
+ TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl5TimeUnit;
+
+/** Offset 0x0819 - Interrupt Redirection Mode Select
+ Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;4:
+ PAIR with fixed priority;5: PAIR with round robin;6: PAIR with hash vector;7: No change.
+**/
+ UINT8 PpmIrmSetting;
+
+/** Offset 0x081A - Lock prochot configuration
+ Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ProcHotLock;
+
+/** Offset 0x081B - Configuration for boot TDP selection
+ Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP
+ Up;0xFF : Deactivate
+**/
+ UINT8 ConfigTdpLevel;
+
+/** Offset 0x081C - Race To Halt
+ Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency
+ in order to enter pkg C-State faster to reduce overall power. (RTH is controlled
+ through MSR 1FC bit 20)Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 RaceToHalt;
+
+/** Offset 0x081D - Max P-State Ratio
+ Max P-State Ratio, Valid Range 0 to 0x7F
+**/
+ UINT8 MaxRatio;
+
+/** Offset 0x081E - P-state ratios for custom P-state table
+ P-state ratios for custom P-state table. NumberOfEntries has valid range between
+ 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries]
+ are configurable. Valid Range of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatio[40];
+
+/** Offset 0x0846 - P-state ratios for max 16 version of custom P-state table
+ P-state ratios for max 16 version of custom P-state table. This table is used for
+ OS versions limited to a max of 16 P-States. If the first entry of this table is
+ 0, or if Number of Entries is 16 or less, then this table will be ignored, and
+ up to the top 16 values of the StateRatio table will be used instead. Valid Range
+ of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatioMax16[16];
+
+/** Offset 0x0856 - Platform Power Pmax
+ PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
+ Range 0-1024 Watts. Value of 800 = 100W
+**/
+ UINT16 PsysPmax;
+
+/** Offset 0x0858 - Interrupt Response Time Limit of C-State LatencyContol0
+ Interrupt Response Time Limit of C-State LatencyContol0.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl0Irtl;
+
+/** Offset 0x085A - Interrupt Response Time Limit of C-State LatencyContol1
+ Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl1Irtl;
+
+/** Offset 0x085C - Interrupt Response Time Limit of C-State LatencyContol2
+ Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl2Irtl;
+
+/** Offset 0x085E - Interrupt Response Time Limit of C-State LatencyContol3
+ Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl3Irtl;
+
+/** Offset 0x0860 - Interrupt Response Time Limit of C-State LatencyContol4
+ Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl4Irtl;
+
+/** Offset 0x0862 - Interrupt Response Time Limit of C-State LatencyContol5
+ Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl5Irtl;
+
+/** Offset 0x0864 - Package Long duration turbo mode power limit
+ Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.
+ Valid Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit1;
+
+/** Offset 0x0868 - Package Short duration turbo mode power limit
+ Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit2Power;
+
+/** Offset 0x086C - Package PL3 power limit
+ Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit3;
+
+/** Offset 0x0870 - Package PL4 power limit
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 1023875 in Step size of 125
+**/
+ UINT32 PowerLimit4;
+
+/** Offset 0x0874 - Tcc Offset Time Window for RATL
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 1023875 in Step size of 125
+**/
+ UINT32 TccOffsetTimeWindowForRatl;
+
+/** Offset 0x0878 - Short term Power Limit value for custom cTDP level 1
+ Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit1;
+
+/** Offset 0x087C - Long term Power Limit value for custom cTDP level 1
+ Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit2;
+
+/** Offset 0x0880 - Short term Power Limit value for custom cTDP level 2
+ Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit1;
+
+/** Offset 0x0884 - Long term Power Limit value for custom cTDP level 2
+ Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit2;
+
+/** Offset 0x0888 - Short term Power Limit value for custom cTDP level 3
+ Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit1;
+
+/** Offset 0x088C - Long term Power Limit value for custom cTDP level 3
+ Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit2;
+
+/** Offset 0x0890 - Platform PL1 power
+ Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit1Power;
+
+/** Offset 0x0894 - Platform PL2 power
+ Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit2Power;
+
+/** Offset 0x0898 - Set Three Strike Counter Disable
+ False (default): Three Strike counter will be incremented and True: Prevents Three
+ Strike counter from incrementing; <b>0: False</b>; 1: True.
+ 0: False, 1: True
+**/
+ UINT8 ThreeStrikeCounterDisable;
+
+/** Offset 0x0899 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT
+ Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 HwpInterruptControl;
+
+/** Offset 0x089A - 5-Core Ratio Limit
+ 5-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 5-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+ 0x0:0xFF
+**/
+ UINT8 FiveCoreRatioLimit;
+
+/** Offset 0x089B - 6-Core Ratio Limit
+ 6-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 6-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+ 0x0:0xFF
+**/
+ UINT8 SixCoreRatioLimit;
+
+/** Offset 0x089C - 7-Core Ratio Limit
+ 7-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 7-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+ 0x0:0xFF
+**/
+ UINT8 SevenCoreRatioLimit;
+
+/** Offset 0x089D - 8-Core Ratio Limit
+ 8-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 8-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+ 0x0:0xFF
+**/
+ UINT8 EightCoreRatioLimit;
+
+/** Offset 0x089E - Intel Turbo Boost Max Technology 3.0
+ Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b>
+ $EN_DIS
+**/
+ UINT8 EnableItbm;
+
+/** Offset 0x089F - Intel Turbo Boost Max Technology 3.0 Driver
+ Intel Turbo Boost Max Technology 3.0 Driver <b>0: Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 EnableItbmDriver;
+
+/** Offset 0x08A0 - Enable or Disable C1 Cstate Demotion
+ Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateAutoDemotion;
+
+/** Offset 0x08A1 - Enable or Disable C1 Cstate UnDemotion
+ Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateUnDemotion;
+
+/** Offset 0x08A2 - CpuWakeUpTimer
+ Enable long CPU Wakeup Timer. When enabled, the cpu internal wakeup time is increased
+ to 180 seconds. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 CpuWakeUpTimer;
+
+/** Offset 0x08A3 - Minimum Ring ratio limit override
+ Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MinRingRatioLimit;
+
+/** Offset 0x08A4 - Minimum Ring ratio limit override
+ Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MaxRingRatioLimit;
+
+/** Offset 0x08A5 - Enable or Disable C3 Cstate Demotion
+ Enable or Disable C3 Cstate Demotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C3StateAutoDemotion;
+
+/** Offset 0x08A6 - Enable or Disable C3 Cstate UnDemotion
+ Enable or Disable C3 Cstate UnDemotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C3StateUnDemotion;
+
+/** Offset 0x08A7 - ReservedCpuPostMemTest
+ Reserved for CPU Post-Mem Test
+ $EN_DIS
+**/
+ UINT8 ReservedCpuPostMemTest[19];
+
+/** Offset 0x08BA - SgxSinitDataFromTpm
+ SgxSinitDataFromTpm default values
+**/
+ UINT8 SgxSinitDataFromTpm;
+
+/** Offset 0x08BB - End of Post message
+ Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
+ EOP send in PEI, Send in DXE(0x2)(Default): EOP send in PEI
+ 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved
+**/
+ UINT8 EndOfPostMessage;
+
+/** Offset 0x08BC - D0I3 Setting for HECI Disable
+ Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all
+ HECI devices
+ $EN_DIS
+**/
+ UINT8 DisableD0I3SettingForHeci;
+
+/** Offset 0x08BD - HD Audio Reset Wait Timer
+ The delay timer after Azalia reset, the value is number of microseconds. Default is 600.
+**/
+ UINT16 PchHdaResetWaitTimer;
+
+/** Offset 0x08BF - Enable LOCKDOWN SMI
+ Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
+ $EN_DIS
+**/
+ UINT8 PchLockDownGlobalSmi;
+
+/** Offset 0x08C0 - Enable LOCKDOWN BIOS Interface
+ Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register.
+ $EN_DIS
+**/
+ UINT8 PchLockDownBiosInterface;
+
+/** Offset 0x08C1 - Unlock all GPIO pads
+ Force all GPIO pads to be unlocked for debug purpose.
+ $EN_DIS
+**/
+ UINT8 PchUnlockGpioPads;
+
+/** Offset 0x08C2 - PCH Unlock SBI access
+ Deprecated
+ $EN_DIS
+**/
+ UINT8 PchSbiUnlock;
+
+/** Offset 0x08C3 - PCH Unlock SideBand access
+ The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before
+ 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access.
+ $EN_DIS
+**/
+ UINT8 PchSbAccessUnlock;
+
+/** Offset 0x08C4 - PCIE RP Ltr Max Snoop Latency
+ Latency Tolerance Reporting, Max Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxSnoopLatency[24];
+
+/** Offset 0x08F4 - PCIE RP Ltr Max No Snoop Latency
+ Latency Tolerance Reporting, Max Non-Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxNoSnoopLatency[24];
+
+/** Offset 0x0924 - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMode[24];
+
+/** Offset 0x093C - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x0954 - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 PcieRpSnoopLatencyOverrideValue[24];
+
+/** Offset 0x0984 - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMode[24];
+
+/** Offset 0x099C - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x09B4 - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 PcieRpNonSnoopLatencyOverrideValue[24];
+
+/** Offset 0x09E4 - PCIE RP Slot Power Limit Scale
+ Specifies scale used for slot power limit value. Leave as 0 to set to default.
+**/
+ UINT8 PcieRpSlotPowerLimitScale[24];
+
+/** Offset 0x09FC - PCIE RP Slot Power Limit Value
+ Specifies upper limit on power supplie by slot. Leave as 0 to set to default.
+**/
+ UINT16 PcieRpSlotPowerLimitValue[24];
+
+/** Offset 0x0A2C - PCIE RP Upstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 5.
+**/
+ UINT8 PcieRpUptp[24];
+
+/** Offset 0x0A44 - PCIE RP Downstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
+**/
+ UINT8 PcieRpDptp[24];
+
+/** Offset 0x0A5C - PCIE RP Enable Port8xh Decode
+ This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePort8xhDecode;
+
+/** Offset 0x0A5D - PCIE Port8xh Decode Port Index
+ The Index of PCIe Port that is selected for Port8xh Decode (0 Based).
+**/
+ UINT8 PchPciePort8xhDecodePortIndex;
+
+/** Offset 0x0A5E - PCH Energy Reporting
+ Disable/Enable PCH to CPU energy report feature.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableEnergyReport;
+
+/** Offset 0x0A5F - PCH Sata Test Mode
+ Allow entrance to the PCH SATA test modes.
+ $EN_DIS
+**/
+ UINT8 SataTestMode;
+
+/** Offset 0x0A60 - PCH USB OverCurrent mapping lock enable
+ If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning
+ that OC mapping data will be consumed by xHCI and OC mapping registers will be locked.
+ $EN_DIS
+**/
+ UINT8 PchXhciOcLock;
+
+/** Offset 0x0A61
+**/
+ UINT8 UnusedUpdSpace24[17];
+
+/** Offset 0x0A72 - Skip POSTBOOT SAI
+ Deprecated
+ $EN_DIS
+**/
+ UINT8 SkipPostBootSai;
+
+/** Offset 0x0A73 - Mctp Broadcast Cycle
+ Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 MctpBroadcastCycle;
+
+/** Offset 0x0A74
+**/
+ UINT8 ReservedFspsTestUpd[12];
+} FSP_S_TEST_CONFIG;
+
+/** Fsp S UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+ FSP_UPD_HEADER FspUpdHeader;
+
+/** Offset 0x0020
+**/
+ FSP_S_CONFIG FspsConfig;
+
+/** Offset 0x07AD
+**/
+ FSP_S_TEST_CONFIG FspsTestConfig;
+
+/** Offset 0x0A80
+**/
+ UINT16 UpdTerminator;
+} FSPS_UPD;
+
+#pragma pack()
+
+#endif
|