diff options
author | Andrey Petrov <andrey.petrov@intel.com> | 2017-06-05 18:09:12 -0700 |
---|---|---|
committer | Aaron Durbin <adurbin@chromium.org> | 2017-07-12 17:41:24 +0000 |
commit | ce1b28f96673f1a0e5a969fd71982b70ef823e93 (patch) | |
tree | 2fdab64884bbde08873f798571273aba2b853934 /src/vendorcode/intel/fsp/fsp2_0 | |
parent | 9cd59312f8b57acfdfc9f5b2aae9d7b2ac54e9bc (diff) |
vendorcode/intel: Add initial FSP headers for Cannonlake
Intial FSP headers with FSP version 1.5.30
Change-Id: I4471c6aa40ff23179b033a873aec1887b8b4370e
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/20069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Diffstat (limited to 'src/vendorcode/intel/fsp/fsp2_0')
-rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h | 48 | ||||
-rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h | 3335 | ||||
-rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h | 4027 | ||||
-rw-r--r-- | src/vendorcode/intel/fsp/fsp2_0/cannonlake/MemInfoHob.h | 280 |
4 files changed, 7690 insertions, 0 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h new file mode 100644 index 0000000000..364afedd14 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspUpd.h @@ -0,0 +1,48 @@ +/** @file + +Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include <FspEas.h> + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F4450554C4E43 /* 'CNLUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4E43 /* 'CNLUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F4450554C4E43 /* 'CNLUPD_S' */ + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h new file mode 100644 index 0000000000..0e2bd999db --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspmUpd.h @@ -0,0 +1,3335 @@ +/** @file + +Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +#include <MemInfoHob.h> + +/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS +/// ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + + +/** Fsp M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Platform Reserved Memory Size + The minimum platform memory size required to pass control into DXE +**/ + UINT64 PlatformMemorySize; + +/** Offset 0x0048 - Memory SPD Pointer Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr00; + +/** Offset 0x004C - Memory SPD Pointer Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr01; + +/** Offset 0x0050 - Memory SPD Pointer Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr10; + +/** Offset 0x0054 - Memory SPD Pointer Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 +**/ + UINT32 MemorySpdPtr11; + +/** Offset 0x0058 - SPD Data Length + Length of SPD Data + 0x100:256 Bytes, 0x200:512 Bytes +**/ + UINT16 MemorySpdDataLen; + +/** Offset 0x005A - Dq Byte Map CH0 + Dq byte mapping between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqByteMapCh0[12]; + +/** Offset 0x0066 - Dq Byte Map CH1 + Dq byte mapping between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqByteMapCh1[12]; + +/** Offset 0x0072 - Dqs Map CPU to DRAM CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent +**/ + UINT8 DqsMapCpu2DramCh0[8]; + +/** Offset 0x007A - Dqs Map CPU to DRAM CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent +**/ + UINT8 DqsMapCpu2DramCh1[8]; + +/** Offset 0x0082 - RcompResister settings + Indicates RcompReister settings: CNL - 0's means MRC auto configured based on Design + Guidelines, otherwise input an Ohmic value per segment. CFL will need to provide + the appropriate values. +**/ + UINT16 RcompResistor[3]; + +/** Offset 0x0088 - RcompTarget settings + RcompTarget settings: CNL - 0's mean MRC auto configured based on Design Guidelines, + otherwise input an Ohmic value per segment. CFL will need to provide the appropriate values. +**/ + UINT16 RcompTarget[5]; + +/** Offset 0x0092 - Dqs Pins Interleaved Setting + Indicates DqPinsInterleaved setting: board-dependent + $EN_DIS +**/ + UINT8 DqPinsInterleaved; + +/** Offset 0x0093 - VREF_CA + CA Vref routing: board-dependent + 0:VREF_CA goes to both CH_A and CH_B, 1: VREF_CA to CH_A and VREF_DQ_A to CH_B, + 2:VREF_CA to CH_A and VREF_DQ_B to CH_B +**/ + UINT8 CaVrefConfig; + +/** Offset 0x0094 - Smram Mask + The SMM Regions AB-SEG and/or H-SEG reserved + 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both +**/ + UINT8 SmramMask; + +/** Offset 0x0095 - MRC Fast Boot + Enables/Disable the MRC fast path thru the MRC + $EN_DIS +**/ + UINT8 MrcFastBoot; + +/** Offset 0x0096 - Rank Margin Tool per Task + This option enables the user to execute Rank Margin Tool per major training step + in the MRC. + $EN_DIS +**/ + UINT8 RmtPerTask; + +/** Offset 0x0097 - Training Trace + This option enables the trained state tracing feature in MRC. This feature will + print out the key training parameters state across major training steps. + $EN_DIS +**/ + UINT8 TrainTrace; + +/** Offset 0x0098 - Intel Enhanced Debug + Intel Enhanced Debug (IED): 0=Disabled, 0x400000=Enabled and 4MB SMRAM occupied + 0 : Disable, 0x400000 : Enable +**/ + UINT32 IedSize; + +/** Offset 0x009C - Tseg Size + Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build + 0x0400000:4MB, 0x01000000:16MB +**/ + UINT32 TsegSize; + +/** Offset 0x00A0 - MMIO Size + Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB +**/ + UINT16 MmioSize; + +/** Offset 0x00A2 - Probeless Trace + Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. + This also requires IED to be enabled. + $EN_DIS +**/ + UINT8 ProbelessTrace; + +/** Offset 0x00A3 +**/ + UINT8 UnusedUpdSpace0[2]; + +/** Offset 0x00A5 - Enable SMBus + Enable/disable SMBus controller. + $EN_DIS +**/ + UINT8 SmbusEnable; + +/** Offset 0x00A6 - Spd Address Tabl + Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used + if SPD Address is 00 +**/ + UINT8 SpdAddressTable[4]; + +/** Offset 0x00AA - Platform Debug Consent + To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. + Enabling this BIOS option may alter the default value of other debug-related BIOS + options. Note: DCI OOB (aka BSSB) uses CCA probe + 0:Disabled, 1:Enabled (DCI OOB+DbC), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), + 4:Enabled (XDP/MIPI60) +**/ + UINT8 PlatformDebugConsent; + +/** Offset 0x00AB - USB3 Type-C UFP2DFP Kernel/Platform Debug Support + This BIOS option enables kernel and platform debug for USB3 interface over a UFP + Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DciUsb3TypecUfpDbg; + +/** Offset 0x00AC - PCH Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode +**/ + UINT8 PchTraceHubMode; + +/** Offset 0x00AD - PCH Trace Hub Memory Region 0 buffer Size + Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg0Size; + +/** Offset 0x00AE - PCH Trace Hub Memory Region 1 buffer Size + Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg1Size; + +/** Offset 0x00AF - PchPreMemRsvd + Reserved for PCH Pre-Mem Reserved + $EN_DIS +**/ + UINT8 PchPreMemRsvd[9]; + +/** Offset 0x00B8 - Internal Graphics Pre-allocated Memory + Size of memory preallocated for internal graphics. + 0x00:0MB, 0x01:32MB, 0x02:64MB, 0xF0:4MB, 0xF1:8MB, 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, + 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, + 0xFD:56MB, 0xFE:60MB +**/ + UINT8 IgdDvmt50PreAlloc; + +/** Offset 0x00B9 - Internal Graphics + Enable/disable internal graphics. + $EN_DIS +**/ + UINT8 InternalGfx; + +/** Offset 0x00BA - Aperture Size + Select the Aperture Size. + 0:128 MB, 1:256 MB, 2:512 MB +**/ + UINT8 ApertureSize; + +/** Offset 0x00BB - Board Type + MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile + Halo, 7=UP Server + 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server +**/ + UINT8 UserBd; + +/** Offset 0x00BC - SA GV + System Agent dynamic frequency support and when enabled memory will be training + at two different frequencies. Only effects ULX/ULT CPUs. 0=Disabled, 1=FixedLow, + 2=FixedHigh, and 3=Enabled. + 0:Disabled, 1:FixedLow, 2:FixedMid, 3:FixedHigh, 4:Enabled +**/ + UINT8 SaGv; + +/** Offset 0x00BD +**/ + UINT8 UnusedUpdSpace1; + +/** Offset 0x00BE - DDR Frequency Limit + Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, + 2133, 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 DdrFreqLimit; + +/** Offset 0x00C0 - Low Frequency + SAGV Low Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, + 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 FreqSaGvLow; + +/** Offset 0x00C2 - Mid Frequency + SAGV Mid Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, 2133, + 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 FreqSaGvMid; + +/** Offset 0x00C4 - Rank Margin Tool + Enable/disable Rank Margin Tool. + $EN_DIS +**/ + UINT8 RMT; + +/** Offset 0x00C5 - Channel A DIMM Control + Channel A DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs +**/ + UINT8 DisableDimmChannel0; + +/** Offset 0x00C6 - Channel B DIMM Control + Channel B DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs +**/ + UINT8 DisableDimmChannel1; + +/** Offset 0x00C7 - Scrambler Support + This option enables data scrambling in memory. + $EN_DIS +**/ + UINT8 ScramblerSupport; + +/** Offset 0x00C8 - MMA Test Content Pointer + Pointer to MMA Test Content in Memory +**/ + UINT32 MmaTestContentPtr; + +/** Offset 0x00CC - MMA Test Content Size + Size of MMA Test Content in Memory +**/ + UINT32 MmaTestContentSize; + +/** Offset 0x00D0 - MMA Test Config Pointer + Pointer to MMA Test Config in Memory +**/ + UINT32 MmaTestConfigPtr; + +/** Offset 0x00D4 - MMA Test Config Size + Size of MMA Test Config in Memory +**/ + UINT32 MmaTestConfigSize; + +/** Offset 0x00D8 - SPD Profile Selected + Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP + Profile 1, 3=XMP Profile 2 + 0:Default profile, 1:Custom profile, 2:XMP profile 1, 3:XMP profile 2 +**/ + UINT8 SpdProfileSelected; + +/** Offset 0x00D9 - Memory Reference Clock + Automatic, 100MHz, 133MHz. + 0:Auto, 1:133MHz, 2:100MHz +**/ + UINT8 RefClk; + +/** Offset 0x00DA - Memory Voltage + Memory Voltage Override (Vddq). Default = no override + 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 + Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts +**/ + UINT16 VddVoltage; + +/** Offset 0x00DC - Memory Ratio + Automatic or the frequency will equal ratio times reference clock. Set to Auto to + recalculate memory timings listed below. + 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT8 Ratio; + +/** Offset 0x00DD - QCLK Odd Ratio + Adds 133 or 100 MHz to QCLK frequency, depending on RefClk + $EN_DIS +**/ + UINT8 OddRatioMode; + +/** Offset 0x00DE - tCL + CAS Latency, 0: AUTO, max: 31 +**/ + UINT8 tCL; + +/** Offset 0x00DF - tCWL + Min CAS Write Latency Delay Time, 0: AUTO, max: 34 +**/ + UINT8 tCWL; + +/** Offset 0x00E0 - tRCD/tRP + RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63 +**/ + UINT8 tRCDtRP; + +/** Offset 0x00E1 - tRRD + Min Row Active to Row Active Delay Time, 0: AUTO, max: 15 +**/ + UINT8 tRRD; + +/** Offset 0x00E2 - tFAW + Min Four Activate Window Delay Time, 0: AUTO, max: 63 +**/ + UINT16 tFAW; + +/** Offset 0x00E4 - tRAS + RAS Active Time, 0: AUTO, max: 64 +**/ + UINT16 tRAS; + +/** Offset 0x00E6 - tREFI + Refresh Interval, 0: AUTO, max: 65535 +**/ + UINT16 tREFI; + +/** Offset 0x00E8 - tRFC + Min Refresh Recovery Delay Time, 0: AUTO, max: 1023 +**/ + UINT16 tRFC; + +/** Offset 0x00EA - tRTP + Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal + values: 5, 6, 7, 8, 9, 10, 12 +**/ + UINT8 tRTP; + +/** Offset 0x00EB - tWR + Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, + 20, 24, 30, 34, 40 + 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, + 34:34, 40:40 +**/ + UINT8 tWR; + +/** Offset 0x00EC - tWTR + Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28 +**/ + UINT8 tWTR; + +/** Offset 0x00ED - NMode + System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N +**/ + UINT8 NModeSupport; + +/** Offset 0x00EE - DllBwEn[0] + DllBwEn[0], for 1067 (0..7) +**/ + UINT8 DllBwEn0; + +/** Offset 0x00EF - DllBwEn[1] + DllBwEn[1], for 1333 (0..7) +**/ + UINT8 DllBwEn1; + +/** Offset 0x00F0 - DllBwEn[2] + DllBwEn[2], for 1600 (0..7) +**/ + UINT8 DllBwEn2; + +/** Offset 0x00F1 - DllBwEn[3] + DllBwEn[3], for 1867 and up (0..7) +**/ + UINT8 DllBwEn3; + +/** Offset 0x00F2 - ISVT IO Port Address + ISVT IO Port Address. 0=Minimal, 0xFF=Maximum, 0x99=Default +**/ + UINT8 IsvtIoPort; + +/** Offset 0x00F3 - CPU Trace Hub Mode + Select 'Target Debugger' if Trace Hub is used by target debugger software or 'Disable' + trace hub functionality. + 0: Disable, 1:Target Debugger Mode +**/ + UINT8 CpuTraceHubMode; + +/** Offset 0x00F4 - CPU Trace Hub Memory Region 0 + CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg0Size; + +/** Offset 0x00F5 - CPU Trace Hub Memory Region 1 + CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg1Size; + +/** Offset 0x00F6 +**/ + UINT8 UnusedUpdSpace2[6]; + +/** Offset 0x00FC - Enable Intel HD Audio (Azalia) + 0: Disable, 1: Enable (Default) Azalia controller + $EN_DIS +**/ + UINT8 PchHdaEnable; + +/** Offset 0x00FD - Enable PCH ISH Controller + 0: Disable, 1: Enable (Default) ISH Controller + $EN_DIS +**/ + UINT8 PchIshEnable; + +/** Offset 0x00FE - HECI Timeouts + 0: Disable, 1: Enable (Default) timeout check for HECI + $EN_DIS +**/ + UINT8 HeciTimeouts; + +/** Offset 0x00FF +**/ + UINT8 UnusedUpdSpace3; + +/** Offset 0x0100 - HECI1 BAR address + BAR address of HECI1 +**/ + UINT32 Heci1BarAddress; + +/** Offset 0x0104 - HECI2 BAR address + BAR address of HECI2 +**/ + UINT32 Heci2BarAddress; + +/** Offset 0x0108 - HECI3 BAR address + BAR address of HECI3 +**/ + UINT32 Heci3BarAddress; + +/** Offset 0x010C - SG dGPU Power Delay + SG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is + 300=300 microseconds +**/ + UINT16 SgDelayAfterPwrEn; + +/** Offset 0x010E - SG dGPU Reset Delay + SG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 + microseconds +**/ + UINT16 SgDelayAfterHoldReset; + +/** Offset 0x0110 - MMIO size adjustment for AUTO mode + Positive number means increasing MMIO size, Negative value means decreasing MMIO + size: 0 (Default)=no change to AUTO mode MMIO size +**/ + UINT16 MmioSizeAdjustment; + +/** Offset 0x0112 - Enable/Disable DMI GEN3 Static EQ Phase1 programming + Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiGen3ProgramStaticEq; + +/** Offset 0x0113 - Enable/Disable PEG 0 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg0Enable; + +/** Offset 0x0114 - Enable/Disable PEG 1 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg1Enable; + +/** Offset 0x0115 - Enable/Disable PEG 2 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg2Enable; + +/** Offset 0x0116 - Enable/Disable PEG 3 + Disabled(0x0): Disable PEG Port, Enabled(0x1): Enable PEG Port (If Silicon SKU permits + it), Auto(0x2)(Default): If an endpoint is present, enable the PEG Port, Disable otherwise + 0:Disable, 1:Enable, 2:AUTO +**/ + UINT8 Peg3Enable; + +/** Offset 0x0117 - PEG 0 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg0MaxLinkSpeed; + +/** Offset 0x0118 - PEG 1 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg1MaxLinkSpeed; + +/** Offset 0x0119 - PEG 2 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg2MaxLinkSpeed; + +/** Offset 0x011A - PEG 3 Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 Peg3MaxLinkSpeed; + +/** Offset 0x011B - PEG 0 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2, (0x3):Limit Link to x4, (0x4): Limit Link to x8 + 0:Auto, 1:x1, 2:x2, 3:x4, 4:x8 +**/ + UINT8 Peg0MaxLinkWidth; + +/** Offset 0x011C - PEG 1 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2, (0x3):Limit Link to x4 + 0:Auto, 1:x1, 2:x2, 3:x4 +**/ + UINT8 Peg1MaxLinkWidth; + +/** Offset 0x011D - PEG 2 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2 + 0:Auto, 1:x1, 2:x2 +**/ + UINT8 Peg2MaxLinkWidth; + +/** Offset 0x011E - PEG 3 Max Link Width + Auto (Default)(0x0): Maximum possible link width, (0x1): Limit Link to x1, (0x2): + Limit Link to x2 + 0:Auto, 1:x1, 2:x2 +**/ + UINT8 Peg3MaxLinkWidth; + +/** Offset 0x011F - Power down unused lanes on PEG 0 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg0PowerDownUnusedLanes; + +/** Offset 0x0120 - Power down unused lanes on PEG 1 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg1PowerDownUnusedLanes; + +/** Offset 0x0121 - Power down unused lanes on PEG 2 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg2PowerDownUnusedLanes; + +/** Offset 0x0122 - Power down unused lanes on PEG 3 + (0x0): Do not power down any lane, (0x1): Bios will power down unused lanes based + on the max possible link width + 0:No power saving, 1:Auto +**/ + UINT8 Peg3PowerDownUnusedLanes; + +/** Offset 0x0123 - PCIe ASPM programming will happen in relation to the Oprom + Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): + Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after + Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume + 0:Before, 1:After +**/ + UINT8 InitPcieAspmAfterOprom; + +/** Offset 0x0124 - PCIe Disable Spread Spectrum Clocking + PCIe Disable Spread Spectrum Clocking. Normal Operation(0x0)(Default) - SSC enabled, + Disable SSC(0X1) - Disable SSC per platform design or for compliance testing + 0:Normal Operation, 1:Disable SSC +**/ + UINT8 PegDisableSpreadSpectrumClocking; + +/** Offset 0x0125 +**/ + UINT8 UnusedUpdSpace4[3]; + +/** Offset 0x0128 - DMI Gen3 Root port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 DmiGen3RootPortPreset[8]; + +/** Offset 0x0130 - DMI Gen3 End port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 DmiGen3EndPointPreset[8]; + +/** Offset 0x0138 - DMI Gen3 End port Hint values per lane + Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 DmiGen3EndPointHint[8]; + +/** Offset 0x0140 - DMI Gen3 RxCTLEp per-Bundle control + Range: 0-15, 12 is default for each bundle, must be specified based upon platform design +**/ + UINT8 DmiGen3RxCtlePeaking[4]; + +/** Offset 0x0144 +**/ + UINT8 UnusedUpdSpace5[4]; + +/** Offset 0x0148 - PEG Gen3 RxCTLEp per-Bundle control + Range: 0-15, 12 is default for each bundle, must be specified based upon platform design +**/ + UINT8 PegGen3RxCtlePeaking[8]; + +/** Offset 0x0150 - Memory data pointer for saved preset search results + The reference code will store the Gen3 Preset Search results in the SaDataHob's + PegData structure (SA_PEG_DATA) and platform code can save/restore this data to + skip preset search in the following boots. Range: 0-0xFFFFFFFF, default is 0 +**/ + UINT32 PegDataPtr; + +/** Offset 0x0154 - PEG PERST# GPIO information + The reference code will use the information in this structure in order to reset + PCIe Gen3 devices during equalization, if necessary +**/ + UINT8 PegGpioData[28]; + +/** Offset 0x0170 - PCIe Hot Plug Enable/Disable per port + 0(Default): Disable, 1: Enable +**/ + UINT8 PegRootPortHPE[4]; + +/** Offset 0x0174 - DeEmphasis control for DMI + DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB + 0: -6dB, 1: -3.5dB +**/ + UINT8 DmiDeEmphasis; + +/** Offset 0x0175 - Selection of the primary display device + 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Switchable Graphics + 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Switchable Graphics +**/ + UINT8 PrimaryDisplay; + +/** Offset 0x0176 - Selection of iGFX GTT Memory size + 1=2MB, 2=4MB, 3=8MB, Default is 3 + 1:2MB, 2:4MB, 3:8MB +**/ + UINT16 GttSize; + +/** Offset 0x0178 - Temporary MMIO address for GMADR + The reference code will use this as Temporary MMIO address space to access GMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to + (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress + - 0x1) (Where ApertureSize = 256MB) +**/ + UINT32 GmAdr; + +/** Offset 0x017C - Temporary MMIO address for GTTMMADR + The reference code will use this as Temporary MMIO address space to access GTTMMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr + to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO + + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) +**/ + UINT32 GttMmAdr; + +/** Offset 0x0180 - Selection of PSMI Region size + 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 + 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB +**/ + UINT8 PsmiRegionSize; + +/** Offset 0x0181 - Switchable Graphics GPIO information for PEG 0 + Switchable Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie0Gpio[24]; + +/** Offset 0x0199 - Switchable Graphics GPIO information for PEG 1 + Switchable Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie1Gpio[24]; + +/** Offset 0x01B1 - Switchable Graphics GPIO information for PEG 2 + Switchable Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie2Gpio[24]; + +/** Offset 0x01C9 - Switchable Graphics GPIO information for PEG 3 + Switchable Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs +**/ + UINT8 SaRtd3Pcie3Gpio[24]; + +/** Offset 0x01E1 - Enable/Disable MRC TXT dependency + When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0) + (Default): MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT + initialization $EN_DIS +**/ + UINT8 TxtImplemented; + +/** Offset 0x01E2 - Enable/Disable SA OcSupport + Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport + $EN_DIS +**/ + UINT8 SaOcSupport; + +/** Offset 0x01E3 - GT slice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override +**/ + UINT8 GtVoltageMode; + +/** Offset 0x01E4 - Maximum GTs turbo ratio override + 0(Default)=Minimal/Auto, 60=Maximum +**/ + UINT8 GtMaxOcRatio; + +/** Offset 0x01E5 - The voltage offset applied to GT slice + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 GtVoltageOffset; + +/** Offset 0x01E7 - The GT slice voltage override which is applied to the entire range of GT + frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtVoltageOverride; + +/** Offset 0x01E9 - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtExtraTurboVoltage; + +/** Offset 0x01EB - voltage offset applied to the SA + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 SaVoltageOffset; + +/** Offset 0x01ED - PCIe root port Function number for Switchable Graphics dGPU + Root port Index number to indicate which PCIe root port has dGPU +**/ + UINT8 RootPortIndex; + +/** Offset 0x01EE - Realtime Memory Timing + 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform + realtime memory timing changes after MRC_DONE. + 0: Disabled, 1: Enabled +**/ + UINT8 RealtimeMemoryTiming; + +/** Offset 0x01EF - Enable/Disable SA IPU + Enable(Default): Enable SA IPU, Disable: Disable SA IPU + $EN_DIS +**/ + UINT8 SaIpuEnable; + +/** Offset 0x01F0 - IPU IMR Configuration + 0:IPU Camera, 1:IPU Gen Default is 0 + 0:IPU Camera, 1:IPU Gen +**/ + UINT8 SaIpuImrConfiguration; + +/** Offset 0x01F1 - Selection of PSMI Support On/Off + 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support + $EN_DIS +**/ + UINT8 GtPsmiSupport; + +/** Offset 0x01F2 - SaPreMemProductionRsvd + Reserved for SA Pre-Mem Production + $EN_DIS +**/ + UINT8 SaPreMemProductionRsvd[14]; + +/** Offset 0x0200 - BIST on Reset + Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 BistOnReset; + +/** Offset 0x0201 - Skip Stop PBET Timer Enable/Disable + Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 SkipStopPbet; + +/** Offset 0x0202 - C6DRAM power gating feature + This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM + power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating + feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>. + $EN_DIS +**/ + UINT8 EnableC6Dram; + +/** Offset 0x0203 - Over clocking support + Over clocking support; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 OcSupport; + +/** Offset 0x0204 - Over clocking Lock + Over clocking Lock Enable/Disable; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 OcLock; + +/** Offset 0x0205 - Maximum Core Turbo Ratio Override + Maximum core turbo ratio override allows to increase CPU core frequency beyond the + fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-83 +**/ + UINT8 CoreMaxOcRatio; + +/** Offset 0x0206 - Core voltage mode + Core voltage mode; <b>0: Adaptive</b>; 1: Override. + $EN_DIS +**/ + UINT8 CoreVoltageMode; + +/** Offset 0x0207 - Minimum clr turbo ratio override + Minimum clr turbo ratio override. <b>0: Hardware defaults.</b> Range: 0-83 +**/ + UINT8 RingMinOcRatio; + +/** Offset 0x0208 - Maximum clr turbo ratio override + Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the + fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-83 +**/ + UINT8 RingMaxOcRatio; + +/** Offset 0x0209 - Hyper Threading Enable/Disable + Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 HyperThreading; + +/** Offset 0x020A - CPU ratio value + CPU ratio value. Valid Range 0 to 63. CPU Ratio is 0 when disabled. +**/ + UINT8 CpuRatio; + +/** Offset 0x020B - Boot frequency + Sets the boot frequency starting from reset vector.- 0: Maximum battery performance.- + <b>1: Maximum non-turbo performance</b>.- 2: Turbo performance. @note If Turbo + is selected BIOS will start in max non-turbo mode and switch to Turbo mode. + 0:0, 1:1, 2:2 +**/ + UINT8 BootFrequency; + +/** Offset 0x020C - Number of active cores + Number of active cores(Depends on Number of cores). <b>0: All</b>;<b>1: 1 </b>;<b>2: + 2 </b>;<b>3: 3 </b> + 0:All, 1:1, 2:2, 3:3 +**/ + UINT8 ActiveCoreCount; + +/** Offset 0x020D - Processor Early Power On Configuration FCLK setting + <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- + 2: 400 MHz. - 3: Reserved + 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved +**/ + UINT8 FClkFrequency; + +/** Offset 0x020E - Set JTAG power in C10 and deeper power states + False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 + and deeper power states for debug purpose. <b>0: False</b>; 1: True. + 0: False, 1: True +**/ + UINT8 JtagC10PowerGateDisable; + +/** Offset 0x020F - Enable or Disable VMX + Enable or Disable VMX; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x0210 - AVX2 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx2RatioOffset; + +/** Offset 0x0211 - AVX3 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx3RatioOffset; + +/** Offset 0x0212 - BCLK Adaptive Voltage Enable + When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: + Disable;<b> 1: Enable + $EN_DIS +**/ + UINT8 BclkAdaptiveVoltage; + +/** Offset 0x0213 - Core PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 CorePllVoltageOffset; + +/** Offset 0x0214 - core voltage override + The core voltage override which is applied to the entire range of cpu core frequencies. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageOverride; + +/** Offset 0x0216 - Core Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageAdaptive; + +/** Offset 0x0218 - Core Turbo voltage Offset + The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 +**/ + UINT16 CoreVoltageOffset; + +/** Offset 0x021A - Ring Downbin + Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always + lower than the core ratio.<b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 RingDownBin; + +/** Offset 0x021B - Ring voltage mode + Ring voltage mode; <b>0: Adaptive</b>; 1: Override. + $EN_DIS +**/ + UINT8 RingVoltageMode; + +/** Offset 0x021C - Ring voltage override + The ring voltage override which is applied to the entire range of cpu ring frequencies. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageOverride; + +/** Offset 0x021E - Ring Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageAdaptive; + +/** Offset 0x0220 - Ring Turbo voltage Offset + The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 +**/ + UINT16 RingVoltageOffset; + +/** Offset 0x0222 - TjMax Offset + TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support + TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 +**/ + UINT8 TjMaxOffset; + +/** Offset 0x0223 - BiosGuard + Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable + $EN_DIS +**/ + UINT8 BiosGuard; + +/** Offset 0x0224 +**/ + UINT8 BiosGuardToolsInterface; + +/** Offset 0x0225 - EnableSgx + Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable + $EN_DIS +**/ + UINT8 EnableSgx; + +/** Offset 0x0226 - Txt + Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable + $EN_DIS +**/ + UINT8 Txt; + +/** Offset 0x0227 +**/ + UINT8 UnusedUpdSpace6; + +/** Offset 0x0228 - PrmrrSize + Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable +**/ + UINT32 PrmrrSize; + +/** Offset 0x022C - SinitMemorySize + Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +**/ + UINT32 SinitMemorySize; + +/** Offset 0x0230 - TxtHeapMemorySize + Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable +**/ + UINT32 TxtHeapMemorySize; + +/** Offset 0x0234 - TxtDprMemorySize + Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable +**/ + UINT32 TxtDprMemorySize; + +/** Offset 0x0238 - TxtDprMemoryBase + Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable +**/ + UINT64 TxtDprMemoryBase; + +/** Offset 0x0240 - BiosAcmBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 BiosAcmBase; + +/** Offset 0x0244 - BiosAcmSize + Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable +**/ + UINT32 BiosAcmSize; + +/** Offset 0x0248 - ApStartupBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 ApStartupBase; + +/** Offset 0x024C - TgaSize + Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable +**/ + UINT32 TgaSize; + +/** Offset 0x0250 - TxtLcpPdBase + Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable +**/ + UINT64 TxtLcpPdBase; + +/** Offset 0x0258 - TxtLcpPdSize + Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable +**/ + UINT64 TxtLcpPdSize; + +/** Offset 0x0260 - IsTPMPresence + IsTPMPresence default values +**/ + UINT8 IsTPMPresence; + +/** Offset 0x0261 - ReservedSecurityPreMem + Reserved for Security Pre-Mem + $EN_DIS +**/ + UINT8 ReservedSecurityPreMem[15]; + +/** Offset 0x0270 - Enable PCH HSIO PCIE Rx Set Ctle + Enable PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtleEnable[24]; + +/** Offset 0x0288 - PCH HSIO PCIE Rx Set Ctle Value + PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtle[24]; + +/** Offset 0x02A0 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; + +/** Offset 0x02B8 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; + +/** Offset 0x02D0 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; + +/** Offset 0x02E8 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; + +/** Offset 0x0300 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; + +/** Offset 0x0318 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; + +/** Offset 0x0330 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; + +/** Offset 0x0348 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value + PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen1DeEmph[24]; + +/** Offset 0x0360 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; + +/** Offset 0x0378 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; + +/** Offset 0x0390 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; + +/** Offset 0x03A8 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; + +/** Offset 0x03C0 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; + +/** Offset 0x03C8 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen1EqBoostMag[8]; + +/** Offset 0x03D0 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; + +/** Offset 0x03D8 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen2EqBoostMag[8]; + +/** Offset 0x03E0 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; + +/** Offset 0x03E8 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen3EqBoostMag[8]; + +/** Offset 0x03F0 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; + +/** Offset 0x03F8 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmp[8]; + +/** Offset 0x0400 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; + +/** Offset 0x0408 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmp[8]; + +/** Offset 0x0410 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; + +/** Offset 0x0418 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmp[8]; + +/** Offset 0x0420 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DeEmphEnable[8]; + +/** Offset 0x0428 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen1DeEmph[8]; + +/** Offset 0x0430 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DeEmphEnable[8]; + +/** Offset 0x0438 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen2DeEmph[8]; + +/** Offset 0x0440 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DeEmphEnable[8]; + +/** Offset 0x0448 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen3DeEmph[8]; + +/** Offset 0x0450 - PCH LPC Enhance the port 8xh decoding + Original LPC only decodes one byte of port 80h. + $EN_DIS +**/ + UINT8 PchLpcEnhancePort8xhDecoding; + +/** Offset 0x0451 - PCH Port80 Route + Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. + $EN_DIS +**/ + UINT8 PchPort80Route; + +/** Offset 0x0452 - Enable SMBus ARP support + Enable SMBus ARP support. + $EN_DIS +**/ + UINT8 SmbusArpEnable; + +/** Offset 0x0453 - Number of RsvdSmbusAddressTable. + The number of elements in the RsvdSmbusAddressTable. +**/ + UINT8 PchNumRsvdSmbusAddresses; + +/** Offset 0x0454 - SMBUS Base Address + SMBUS Base Address (IO space). +**/ + UINT16 PchSmbusIoBase; + +/** Offset 0x0456 - Size of PCIe IMR. + Size of PCIe IMR in megabytes +**/ + UINT16 PcieImrSize; + +/** Offset 0x0458 - Point of RsvdSmbusAddressTable + Array of addresses reserved for non-ARP-capable SMBus devices. +**/ + UINT32 RsvdSmbusAddressTablePtr; + +/** Offset 0x045C - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpEnableMask; + +/** Offset 0x0460 - Enable PCIe IMR + 0:Disable, 1:Enable + $EN_DIS +**/ + UINT8 PcieImrEnabled; + +/** Offset 0x0461 - Root port number for IMR. + Root port number for IMR. +**/ + UINT8 ImrRpSelection; + +/** Offset 0x0462 - Enable SMBus Alert Pin + Enable SMBus Alert Pin. + $EN_DIS +**/ + UINT8 PchSmbAlertEnable; + +/** Offset 0x0463 - ReservedSecurityPreMem + Reserved for Security Pre-Mem + $EN_DIS +**/ + UINT8 ReservedPchPreMem[13]; + +/** Offset 0x0470 - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x0471 - PcdSerialIoUartNumber + Select SerialIo Uart Controller for debug. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIoUartNumber; + +/** Offset 0x0472 - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x0473 - GT PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 GtPllVoltageOffset; + +/** Offset 0x0474 - Ring PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 RingPllVoltageOffset; + +/** Offset 0x0475 - System Agent PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 SaPllVoltageOffset; + +/** Offset 0x0476 - Memory Controller PLL voltage offset + Core PLL voltage offset. <b>0: No offset</b>. Range 0-63 +**/ + UINT8 McPllVoltageOffset; + +/** Offset 0x0477 - MRC Safe Config + Enables/Disable MRC Safe Config + $EN_DIS +**/ + UINT8 MrcSafeConfig; + +/** Offset 0x0478 - PcdSerialDebugBaudRate + Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. + 3:9600, 4:19200, 6:56700, 7:115200 +**/ + UINT8 PcdSerialDebugBaudRate; + +/** Offset 0x0479 - HobBufferSize + Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB + total HOB size). + 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value +**/ + UINT8 HobBufferSize; + +/** Offset 0x047A - Early Command Training + Enables/Disable Early Command Training + $EN_DIS +**/ + UINT8 ECT; + +/** Offset 0x047B - SenseAmp Offset Training + Enables/Disable SenseAmp Offset Training + $EN_DIS +**/ + UINT8 SOT; + +/** Offset 0x047C - Early ReadMPR Timing Centering 2D + Enables/Disable Early ReadMPR Timing Centering 2D + $EN_DIS +**/ + UINT8 ERDMPRTC2D; + +/** Offset 0x047D - Read MPR Training + Enables/Disable Read MPR Training + $EN_DIS +**/ + UINT8 RDMPRT; + +/** Offset 0x047E - Receive Enable Training + Enables/Disable Receive Enable Training + $EN_DIS +**/ + UINT8 RCVET; + +/** Offset 0x047F - Jedec Write Leveling + Enables/Disable Jedec Write Leveling + $EN_DIS +**/ + UINT8 JWRL; + +/** Offset 0x0480 - Early Write Time Centering 2D + Enables/Disable Early Write Time Centering 2D + $EN_DIS +**/ + UINT8 EWRTC2D; + +/** Offset 0x0481 - Early Read Time Centering 2D + Enables/Disable Early Read Time Centering 2D + $EN_DIS +**/ + UINT8 ERDTC2D; + +/** Offset 0x0482 - Write Timing Centering 1D + Enables/Disable Write Timing Centering 1D + $EN_DIS +**/ + UINT8 WRTC1D; + +/** Offset 0x0483 - Write Voltage Centering 1D + Enables/Disable Write Voltage Centering 1D + $EN_DIS +**/ + UINT8 WRVC1D; + +/** Offset 0x0484 - Read Timing Centering 1D + Enables/Disable Read Timing Centering 1D + $EN_DIS +**/ + UINT8 RDTC1D; + +/** Offset 0x0485 - Dimm ODT Training + Enables/Disable Dimm ODT Training + $EN_DIS +**/ + UINT8 DIMMODTT; + +/** Offset 0x0486 - DIMM RON Training + Enables/Disable DIMM RON Training + $EN_DIS +**/ + UINT8 DIMMRONT; + +/** Offset 0x0487 - Write Drive Strength/Equalization 2D + Enables/Disable Write Drive Strength/Equalization 2D + $EN_DIS +**/ + UINT8 WRDSEQT; + +/** Offset 0x0488 - Write Slew Rate Training + Enables/Disable Write Slew Rate Training + $EN_DIS +**/ + UINT8 WRSRT; + +/** Offset 0x0489 - Read ODT Training + Enables/Disable Read ODT Training + $EN_DIS +**/ + UINT8 RDODTT; + +/** Offset 0x048A - Read Equalization Training + Enables/Disable Read Equalization Training + $EN_DIS +**/ + UINT8 RDEQT; + +/** Offset 0x048B - Read Amplifier Training + Enables/Disable Read Amplifier Training + $EN_DIS +**/ + UINT8 RDAPT; + +/** Offset 0x048C - Write Timing Centering 2D + Enables/Disable Write Timing Centering 2D + $EN_DIS +**/ + UINT8 WRTC2D; + +/** Offset 0x048D - Read Timing Centering 2D + Enables/Disable Read Timing Centering 2D + $EN_DIS +**/ + UINT8 RDTC2D; + +/** Offset 0x048E - Write Voltage Centering 2D + Enables/Disable Write Voltage Centering 2D + $EN_DIS +**/ + UINT8 WRVC2D; + +/** Offset 0x048F - Read Voltage Centering 2D + Enables/Disable Read Voltage Centering 2D + $EN_DIS +**/ + UINT8 RDVC2D; + +/** Offset 0x0490 - Command Voltage Centering + Enables/Disable Command Voltage Centering + $EN_DIS +**/ + UINT8 CMDVC; + +/** Offset 0x0491 - Late Command Training + Enables/Disable Late Command Training + $EN_DIS +**/ + UINT8 LCT; + +/** Offset 0x0492 - Round Trip Latency Training + Enables/Disable Round Trip Latency Training + $EN_DIS +**/ + UINT8 RTL; + +/** Offset 0x0493 - Turn Around Timing Training + Enables/Disable Turn Around Timing Training + $EN_DIS +**/ + UINT8 TAT; + +/** Offset 0x0494 - Memory Test + Enables/Disable Memory Test + $EN_DIS +**/ + UINT8 MEMTST; + +/** Offset 0x0495 - DIMM SPD Alias Test + Enables/Disable DIMM SPD Alias Test + $EN_DIS +**/ + UINT8 ALIASCHK; + +/** Offset 0x0496 - Receive Enable Centering 1D + Enables/Disable Receive Enable Centering 1D + $EN_DIS +**/ + UINT8 RCVENC1D; + +/** Offset 0x0497 - Retrain Margin Check + Enables/Disable Retrain Margin Check + $EN_DIS +**/ + UINT8 RMC; + +/** Offset 0x0498 - Write Drive Strength Up/Dn independently + Enables/Disable Write Drive Strength Up/Dn independently + $EN_DIS +**/ + UINT8 WRDSUDT; + +/** Offset 0x0499 - ECC Support + Enables/Disable ECC Support + $EN_DIS +**/ + UINT8 EccSupport; + +/** Offset 0x049A - Memory Remap + Enables/Disable Memory Remap + $EN_DIS +**/ + UINT8 RemapEnable; + +/** Offset 0x049B - Rank Interleave support + Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at + the same time. + $EN_DIS +**/ + UINT8 RankInterleave; + +/** Offset 0x049C - Enhanced Interleave support + Enables/Disable Enhanced Interleave support + $EN_DIS +**/ + UINT8 EnhancedInterleave; + +/** Offset 0x049D - Memory Trace + Enable Memory Trace of Ch 0 to Ch 1 using Stacked Mode. Both channels must be of + equal size. This option may change TOLUD and REMAP values as needed. + $EN_DIS +**/ + UINT8 MemoryTrace; + +/** Offset 0x049E - Ch Hash Support + Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode + $EN_DIS +**/ + UINT8 ChHashEnable; + +/** Offset 0x049F - Extern Therm Status + Enables/Disable Extern Therm Status + $EN_DIS +**/ + UINT8 EnableExtts; + +/** Offset 0x04A0 - Closed Loop Therm Manage + Enables/Disable Closed Loop Therm Manage + $EN_DIS +**/ + UINT8 EnableCltm; + +/** Offset 0x04A1 - Open Loop Therm Manage + Enables/Disable Open Loop Therm Manage + $EN_DIS +**/ + UINT8 EnableOltm; + +/** Offset 0x04A2 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDn; + +/** Offset 0x04A3 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDnLpddr; + +/** Offset 0x04A4 - Use user provided power weights, scale factor, and channel power floor values + Enables/Disable Use user provided power weights, scale factor, and channel power + floor values + $EN_DIS +**/ + UINT8 UserPowerWeightsEn; + +/** Offset 0x04A5 - RAPL PL Lock + Enables/Disable RAPL PL Lock + $EN_DIS +**/ + UINT8 RaplLim2Lock; + +/** Offset 0x04A6 - RAPL PL 2 enable + Enables/Disable RAPL PL 2 enable + $EN_DIS +**/ + UINT8 RaplLim2Ena; + +/** Offset 0x04A7 - RAPL PL 1 enable + Enables/Disable RAPL PL 1 enable + $EN_DIS +**/ + UINT8 RaplLim1Ena; + +/** Offset 0x04A8 - SelfRefresh Enable + Enables/Disable SelfRefresh Enable + $EN_DIS +**/ + UINT8 SrefCfgEna; + +/** Offset 0x04A9 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeatLpddr; + +/** Offset 0x04AA - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeat; + +/** Offset 0x04AB - Enable RH Prevention + Enables/Disable RH Prevention + $EN_DIS +**/ + UINT8 RhPrevention; + +/** Offset 0x04AC - Exit On Failure (MRC) + Enables/Disable Exit On Failure (MRC) + $EN_DIS +**/ + UINT8 ExitOnFailure; + +/** Offset 0x04AD - LPDDR Thermal Sensor + Enables/Disable LPDDR Thermal Sensor + $EN_DIS +**/ + UINT8 DdrThermalSensor; + +/** Offset 0x04AE - EV Loader + Enable/Disable EV Loader Functionality + $EN_DIS +**/ + UINT8 EvLoader; + +/** Offset 0x04AF - EV Loader Delay + Enable/Disable EV Loader 2 Second Delay + $EN_DIS +**/ + UINT8 EvLoaderDelay; + +/** Offset 0x04B0 - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedClock; + +/** Offset 0x04B1 - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedZq; + +/** Offset 0x04B2 - Ch Hash Mask + Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to + BITS [19:6 +**/ + UINT16 ChHashMask; + +/** Offset 0x04B4 - Base reference clock value + Base reference clock value, in Hertz(Default is 125Hz) + 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz +**/ + UINT32 BClkFrequency; + +/** Offset 0x04B8 - Ch Hash Interleaved Bit + Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave + the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 + 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 +**/ + UINT8 ChHashInterleaveBit; + +/** Offset 0x04B9 - Energy Scale Factor + Energy Scale Factor, Default is 4 +**/ + UINT8 EnergyScaleFact; + +/** Offset 0x04BA - EPG DIMM Idd3N + Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on + a per DIMM basis. Default is 26 +**/ + UINT16 Idd3n; + +/** Offset 0x04BC - EPG DIMM Idd3P + Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated + on a per DIMM basis. Default is 11 +**/ + UINT16 Idd3p; + +/** Offset 0x04BE - CMD Slew Rate Training + Enable/Disable CMD Slew Rate Training + $EN_DIS +**/ + UINT8 CMDSR; + +/** Offset 0x04BF - CMD Drive Strength and Tx Equalization + Enable/Disable CMD Drive Strength and Tx Equalization + $EN_DIS +**/ + UINT8 CMDDSEQ; + +/** Offset 0x04C0 - CMD Normalization + Enable/Disable CMD Normalization + $EN_DIS +**/ + UINT8 CMDNORM; + +/** Offset 0x04C1 - Early DQ Write Drive Strength and Equalization Training + Enable/Disable Early DQ Write Drive Strength and Equalization Training + $EN_DIS +**/ + UINT8 EWRDSEQ; + +/** Offset 0x04C2 - RH Activation Probability + RH Activation Probability, Probability value is 1/2^(inputvalue) +**/ + UINT8 RhActProbability; + +/** Offset 0x04C3 - RAPL PL 2 WindowX + Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim2WindX; + +/** Offset 0x04C4 - RAPL PL 2 WindowY + Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim2WindY; + +/** Offset 0x04C5 - RAPL PL 1 WindowX + Power PL 1 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindX; + +/** Offset 0x04C6 - RAPL PL 1 WindowY + Power PL 1 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def) +**/ + UINT8 RaplLim1WindY; + +/** Offset 0x04C7 +**/ + UINT8 UnusedUpdSpace7; + +/** Offset 0x04C8 - RAPL PL 2 Power + range[0;2^14-1]= [2047.875;0]in W, (224= Def) +**/ + UINT16 RaplLim2Pwr; + +/** Offset 0x04CA - RAPL PL 1 Power + range[0;2^14-1]= [2047.875;0]in W, (224= Def) +**/ + UINT16 RaplLim1Pwr; + +/** Offset 0x04CC - Warm Threshold Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh0Dimm0; + +/** Offset 0x04CD - Warm Threshold Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh0Dimm1; + +/** Offset 0x04CE - Warm Threshold Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh1Dimm0; + +/** Offset 0x04CF - Warm Threshold Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 WarmThresholdCh1Dimm1; + +/** Offset 0x04D0 - Hot Threshold Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh0Dimm0; + +/** Offset 0x04D1 - Hot Threshold Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh0Dimm1; + +/** Offset 0x04D2 - Hot Threshold Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh1Dimm0; + +/** Offset 0x04D3 - Hot Threshold Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255 +**/ + UINT8 HotThresholdCh1Dimm1; + +/** Offset 0x04D4 - Warm Budget Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh0Dimm0; + +/** Offset 0x04D5 - Warm Budget Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh0Dimm1; + +/** Offset 0x04D6 - Warm Budget Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh1Dimm0; + +/** Offset 0x04D7 - Warm Budget Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 WarmBudgetCh1Dimm1; + +/** Offset 0x04D8 - Hot Budget Ch0 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh0Dimm0; + +/** Offset 0x04D9 - Hot Budget Ch0 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh0Dimm1; + +/** Offset 0x04DA - Hot Budget Ch1 Dimm0 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh1Dimm0; + +/** Offset 0x04DB - Hot Budget Ch1 Dimm1 + range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM +**/ + UINT8 HotBudgetCh1Dimm1; + +/** Offset 0x04DC - Idle Energy Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh0Dimm0; + +/** Offset 0x04DD - Idle Energy Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh0Dimm1; + +/** Offset 0x04DE - Idle Energy Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh1Dimm0; + +/** Offset 0x04DF - Idle Energy Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyCh1Dimm1; + +/** Offset 0x04E0 - PowerDown Energy Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh0Dimm0; + +/** Offset 0x04E1 - PowerDown Energy Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh0Dimm1; + +/** Offset 0x04E2 - PowerDown Energy Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh1Dimm0; + +/** Offset 0x04E3 - PowerDown Energy Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(5= Def) +**/ + UINT8 PdEnergyCh1Dimm1; + +/** Offset 0x04E4 - Activate Energy Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh0Dimm0; + +/** Offset 0x04E5 - Activate Energy Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh0Dimm1; + +/** Offset 0x04E6 - Activate Energy Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh1Dimm0; + +/** Offset 0x04E7 - Activate Energy Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyCh1Dimm1; + +/** Offset 0x04E8 - Read Energy Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh0Dimm0; + +/** Offset 0x04E9 - Read Energy Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh0Dimm1; + +/** Offset 0x04EA - Read Energy Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh1Dimm0; + +/** Offset 0x04EB - Read Energy Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyCh1Dimm1; + +/** Offset 0x04EC - Write Energy Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh0Dimm0; + +/** Offset 0x04ED - Write Energy Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh0Dimm1; + +/** Offset 0x04EE - Write Energy Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh1Dimm0; + +/** Offset 0x04EF - Write Energy Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyCh1Dimm1; + +/** Offset 0x04F0 - Throttler CKEMin Timer + Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). + Dfault is 0x30 +**/ + UINT8 ThrtCkeMinTmr; + +/** Offset 0x04F1 - Cke Rank Mapping + Bits [7:4] - Channel 1, bits [3:0] - Channel 0. <b>0xAA=Default</b> Bit [i] specifies + which rank CKE[i] goes to. +**/ + UINT8 CkeRankMapping; + +/** Offset 0x04F2 - Rapl Power Floor Ch0 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh0; + +/** Offset 0x04F3 - Rapl Power Floor Ch1 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh1; + +/** Offset 0x04F4 - Command Rate Support + CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs + 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS +**/ + UINT8 EnCmdRate; + +/** Offset 0x04F5 - REFRESH_2X_MODE + 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot + 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only +**/ + UINT8 Refresh2X; + +/** Offset 0x04F6 - Energy Performance Gain + Enable/disable(default) Energy Performance Gain. + $EN_DIS +**/ + UINT8 EpgEnable; + +/** Offset 0x04F7 - Row Hammer Solution + Type of method used to prevent Row Hammer. Default is Hardware RHP + 0:Hardware RHP, 1:2x Refresh +**/ + UINT8 RhSolution; + +/** Offset 0x04F8 - User Manual Threshold + Disabled: Predefined threshold will be used.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserThresholdEnable; + +/** Offset 0x04F9 - User Manual Budget + Disabled: Configuration of memories will defined the Budget value.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserBudgetEnable; + +/** Offset 0x04FA - TcritMax + Maximum Critical Temperature in Centigrade of the On-DIMM Thermal Sensor. TCRITMax + has to be greater than THIGHMax .\n + Critical temperature will be TcritMax +**/ + UINT8 TsodTcritMax; + +/** Offset 0x04FB - Event mode + Disable:Comparator mode.\n + Enable:Interrupt mode + $EN_DIS +**/ + UINT8 TsodEventMode; + +/** Offset 0x04FC - EVENT polarity + Disable:Active LOW.\n + Enable:Active HIGH + $EN_DIS +**/ + UINT8 TsodEventPolarity; + +/** Offset 0x04FD - Critical event only + Disable:Trips on alarm or critical.\n + Enable:Trips only if criticaal temperature is reached + $EN_DIS +**/ + UINT8 TsodCriticalEventOnly; + +/** Offset 0x04FE - Event output control + Disable:Event output disable.\n + Enable:Event output enabled + $EN_DIS +**/ + UINT8 TsodEventOutputControl; + +/** Offset 0x04FF - Alarm window lock bit + Disable:Alarm trips are not locked and can be changed.\n + Enable:Alarm trips are locked and cannot be changed + $EN_DIS +**/ + UINT8 TsodAlarmwindowLockBit; + +/** Offset 0x0500 - Critical trip lock bit + Disable:Critical trip is not locked and can be changed.\n + Enable:Critical trip is locked and cannot be changed + $EN_DIS +**/ + UINT8 TsodCriticaltripLockBit; + +/** Offset 0x0501 - Shutdown mode + Disable:Temperature sensor enable.\n + Enable:Temperature sensor disable + $EN_DIS +**/ + UINT8 TsodShutdownMode; + +/** Offset 0x0502 - ThighMax + Thigh = ThighMax (Default is 93) +**/ + UINT8 TsodThigMax; + +/** Offset 0x0503 - User Manual Thig and Tcrit + Disabled(Default): Temperature will be given by the configuration of memories and + 1x or 2xrefresh rate.\n + Enabled: User Input will define for Thigh and Tcrit. + $EN_DIS +**/ + UINT8 TsodManualEnable; + +/** Offset 0x0504 - Force OLTM or 2X Refresh when needed + Disabled(Default): = Force OLTM.\n + Enabled: = Force 2x Refresh. + $EN_DIS +**/ + UINT8 ForceOltmOrRefresh2x; + +/** Offset 0x0505 - Pwr Down Idle Timer + The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means + AUTO: 64 for ULX/ULT, 128 for DT/Halo +**/ + UINT8 PwdwnIdleCounter; + +/** Offset 0x0506 - Bitmask of ranks that have CA bus terminated + Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, + Rank0 is terminating and Rank1 is non-terminating</b> +**/ + UINT8 CmdRanksTerminated; + +/** Offset 0x0507 - GDXC MOT enable + GDXC MOT enable. + $EN_DIS +**/ + UINT8 GdxcEnable; + +/** Offset 0x0508 - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x0509 - Fivr Faults + Fivr Faults; 0: Disabled; <b>1: Enabled.</b> + $EN_DIS +**/ + UINT8 FivrFaults; + +/** Offset 0x050A - Fivr Efficiency + Fivr Efficiency Management; 0: Disabled; <b>1: Enabled.</b> + $EN_DIS +**/ + UINT8 FivrEfficiency; + +/** Offset 0x050B - Safe Mode Support + This option configures the varous items in the IO and MC to be more conservative.(def=Disable) + $EN_DIS +**/ + UINT8 SafeMode; + +/** Offset 0x050C - Ask MRC to clear memory content + Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. + $EN_DIS +**/ + UINT8 CleanMemory; + +/** Offset 0x050D +**/ + UINT8 ReservedFspmUpd[19]; +} FSP_M_CONFIG; + +/** Fsp M Test Configuration +**/ +typedef struct { + +/** Offset 0x0520 +**/ + UINT32 Signature; + +/** Offset 0x0524 - Skip external display device scanning + Enable: Do not scan for external display device, Disable (Default): Scan external + display devices + $EN_DIS +**/ + UINT8 SkipExtGfxScan; + +/** Offset 0x0525 - Generate BIOS Data ACPI Table + Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it + $EN_DIS +**/ + UINT8 BdatEnable; + +/** Offset 0x0526 - Detect External Graphics device for LegacyOpROM + Detect and report if external graphics device only support LegacyOpROM or not (to + support CSM auto-enable). Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 ScanExtGfxForLegacyOpRom; + +/** Offset 0x0527 - Lock PCU Thermal Management registers + Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 LockPTMregs; + +/** Offset 0x0528 - DMI Max Link Speed + Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 + Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 DmiMaxLinkSpeed; + +/** Offset 0x0529 - DMI Equalization Phase 2 + DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): + AUTO - Use the current default method + 0:Disable phase2, 1:Enable phase2, 2:Auto +**/ + UINT8 DmiGen3EqPh2Enable; + +/** Offset 0x052A - DMI Gen3 Equalization Phase3 + DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 DmiGen3EqPh3Method; + +/** Offset 0x052B - Phase2 EQ enable on the PEG 0:1:0. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg0Gen3EqPh2Enable; + +/** Offset 0x052C - Phase2 EQ enable on the PEG 0:1:1. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg1Gen3EqPh2Enable; + +/** Offset 0x052D - Phase2 EQ enable on the PEG 0:1:2. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg2Gen3EqPh2Enable; + +/** Offset 0x052E - Phase2 EQ enable on the PEG 0:1:3. + Phase2 EQ enable on the PEG 0:1:0. Disabled(0x0): Disable phase 2, Enabled(0x1): + Enable phase 2, Auto(0x2)(Default): Use the current default method + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Peg3Gen3EqPh2Enable; + +/** Offset 0x052F - Phase3 EQ method on the PEG 0:1:0. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg0Gen3EqPh3Method; + +/** Offset 0x0530 - Phase3 EQ method on the PEG 0:1:1. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg1Gen3EqPh3Method; + +/** Offset 0x0531 - Phase3 EQ method on the PEG 0:1:2. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg2Gen3EqPh3Method; + +/** Offset 0x0532 - Phase3 EQ method on the PEG 0:1:3. + PEG Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 Peg3Gen3EqPh3Method; + +/** Offset 0x0533 - Enable/Disable PEG GEN3 Static EQ Phase1 programming + Program PEG Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 PegGen3ProgramStaticEq; + +/** Offset 0x0534 - PEG Gen3 SwEq Always Attempt + Gen3 Software Equalization will be executed every boot. Disabled(0x0)(Default): + Reuse EQ settings saved/restored from NVRAM whenever possible, Enabled(0x1): Re-test + and generate new EQ values every boot, not recommended + 0:Disable, 1:Enable +**/ + UINT8 Gen3SwEqAlwaysAttempt; + +/** Offset 0x0535 - Select number of TxEq presets to test in the PCIe/DMI SwEq + Select number of TxEq presets to test in the PCIe/DMI SwEq. P7,P3,P5(0x0): Test + Presets 7, 3, and 5, P0-P9(0x1): Test Presets 0-9, Auto(0x2)(Default): Use the + current default method (Default)Auto will test Presets 7, 3, and 5. It is possible + for this default to change over time;using Auto will ensure Reference Code always + uses the latest default settings + 0:P7 P3 P5, 1:P0 to P9, 2:Auto +**/ + UINT8 Gen3SwEqNumberOfPresets; + +/** Offset 0x0536 - Enable use of the Voltage Offset and Centering Test in the PCIe SwEq + Enable use of the Voltage Offset and Centering Test in the PCIe Software Equalization + Algorithm. Disabled(0x0): Disable VOC Test, Enabled(0x1): Enable VOC Test, Auto(0x2)(Default): + Use the current default + 0:Disable, 1:Enable, 2:Auto +**/ + UINT8 Gen3SwEqEnableVocTest; + +/** Offset 0x0537 - PPCIe Rx Compliance Testing Mode + Disabled(0x0)(Default): Normal Operation - Disable PCIe Rx Compliance testing, Enabled(0x1): + PCIe Rx Compliance Test Mode - PEG controller is in Rx Compliance Testing Mode; + it should only be set when doing PCIe compliance testing + $EN_DIS +**/ + UINT8 PegRxCemTestingMode; + +/** Offset 0x0538 - PCIe Rx Compliance Loopback Lane When PegRxCemTestingMode is Enabled + the specificied Lane (0 - 15) will be used for RxCEMLoopback. Default is Lane 0 +**/ + UINT8 PegRxCemLoopbackLane; + +/** Offset 0x0539 - Generate PCIe BDAT Margin Table + Set this policy to enable the generation and addition of PCIe margin data to the + BDAT table. Disabled(0x0)(Default): Normal Operation - Disable PCIe BDAT margin + data generation, Enable(0x1): Generate PCIe BDAT margin data + $EN_DIS +**/ + UINT8 PegGenerateBdatMarginTable; + +/** Offset 0x053A - PCIe Non-Protocol Awareness for Rx Compliance Testing + Set this policy to enable the generation and addition of PCIe margin data to the + BDAT table. Disabled(0x0)(Default): Normal Operation - Disable non-protocol awareness, + Enable(0x1): Non-Protocol Awareness Enabled - Enable non-protocol awareness for + compliance testing + $EN_DIS +**/ + UINT8 PegRxCemNonProtocolAwareness; + +/** Offset 0x053B - PCIe Override RxCTLE + Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): + Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE + peak values unmodified + $EN_DIS +**/ + UINT8 PegGen3RxCtleOverride; + +/** Offset 0x053C - Rsvd + Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): + Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE + peak values unmodified + $EN_DIS +**/ + UINT8 PegGen3Rsvd; + +/** Offset 0x053D - PEG Gen3 Root port preset values per lane + Used for programming PEG Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 PegGen3RootPortPreset[20]; + +/** Offset 0x0551 - PEG Gen3 End port preset values per lane + Used for programming PEG Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 PegGen3EndPointPreset[20]; + +/** Offset 0x0565 - PEG Gen3 End port Hint values per lane + Used for programming PEG Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 PegGen3EndPointHint[20]; + +/** Offset 0x0579 +**/ + UINT8 UnusedUpdSpace8; + +/** Offset 0x057A - Jitter Dwell Time for PCIe Gen3 Software Equalization + Range: 0-65535, default is 1000. @warning Do not change from the default +**/ + UINT16 Gen3SwEqJitterDwellTime; + +/** Offset 0x057C - Jitter Error Target for PCIe Gen3 Software Equalization + Range: 0-65535, default is 1. @warning Do not change from the default +**/ + UINT16 Gen3SwEqJitterErrorTarget; + +/** Offset 0x057E - VOC Dwell Time for PCIe Gen3 Software Equalization + Range: 0-65535, default is 10000. @warning Do not change from the default +**/ + UINT16 Gen3SwEqVocDwellTime; + +/** Offset 0x0580 - VOC Error Target for PCIe Gen3 Software Equalization + Range: 0-65535, default is 2. @warning Do not change from the default +**/ + UINT16 Gen3SwEqVocErrorTarget; + +/** Offset 0x0582 - Panel Power Enable + Control for enabling/disabling VDD force bit (Required only for early enabling of + eDP panel). 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 PanelPowerEnable; + +/** Offset 0x0583 - SaPreMemTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SaPreMemTestRsvd[13]; + +/** Offset 0x0590 - TotalFlashSize + Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable +**/ + UINT16 TotalFlashSize; + +/** Offset 0x0592 - BiosSize + Enable/Disable. 0: Disable, define default value of BiosSize , 1: enable +**/ + UINT16 BiosSize; + +/** Offset 0x0594 - SecurityTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SecurityTestRsvd[4]; + +/** Offset 0x0598 - Smbus dynamic power gating + Disable or Enable Smbus dynamic power gating. + $EN_DIS +**/ + UINT8 SmbusDynamicPowerGating; + +/** Offset 0x0599 - Disable and Lock Watch Dog Register + Set 1 to clear WDT status, then disable and lock WDT registers. + $EN_DIS +**/ + UINT8 WdtDisableAndLock; + +/** Offset 0x059A - SMBUS SPD Write Disable + Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write + Disable bit. For security recommendations, SPD write disable bit must be set. + $EN_DIS +**/ + UINT8 SmbusSpdWriteDisable; + +/** Offset 0x059B - ChipsetInit HECI message + Enable/Disable. 0: Disable, 1: enable, Enable or disable ChipsetInit HECI message. + If disabled, it prevents from sending ChipsetInit HECI message. + $EN_DIS +**/ + UINT8 ChipsetInitMessage; + +/** Offset 0x059C - Bypass ChipsetInit sync reset. + 0: disable, 1: enable, Set Enable to bypass the reset after ChipsetInit HECI message. + $EN_DIS +**/ + UINT8 BypassPhySyncReset; + +/** Offset 0x059D - Force ME DID Init Status + Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, 4: + Memory not preserved across reset, Set ME DID init stat value + $EN_DIS +**/ + UINT8 DidInitStat; + +/** Offset 0x059E - CPU Replaced Polling Disable + Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop + $EN_DIS +**/ + UINT8 DisableCpuReplacedPolling; + +/** Offset 0x059F - ME DID Message + Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable will prevent + the DID message from being sent) + $EN_DIS +**/ + UINT8 SendDidMsg; + +/** Offset 0x05A0 - Retry mechanism for HECI APIs + Test, 0: disable, 1: enable, Enable/Disable HECI retry. + $EN_DIS +**/ + UINT8 DisableHeciRetry; + +/** Offset 0x05A1 - Check HECI message before send + Test, 0: disable, 1: enable, Enable/Disable message check. + $EN_DIS +**/ + UINT8 DisableMessageCheck; + +/** Offset 0x05A2 - Skip MBP HOB + Test, 0: disable, 1: enable, Enable/Disable MOB HOB. + $EN_DIS +**/ + UINT8 SkipMbpHob; + +/** Offset 0x05A3 - HECI2 Interface Communication + Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. + $EN_DIS +**/ + UINT8 HeciCommunication2; + +/** Offset 0x05A4 - Enable KT device + Test, 0: disable, 1: enable, Enable or Disable KT device. + $EN_DIS +**/ + UINT8 KtDeviceEnable; + +/** Offset 0x05A5 +**/ + UINT8 ReservedFspmTestUpd[11]; +} FSP_M_TEST_CONFIG; + +/** Fsp M Restricted Configuration +**/ +typedef struct { + +/** Offset 0x05B0 +**/ + UINT32 Signature; + +/** Offset 0x05B4 - Sa Sv Remap Base Override + SvRemapBaseOverride +**/ + UINT16 SaSvRemapBaseOverride; + +/** Offset 0x05B6 - Sa System Agent ClockGating Enable + SystemAgentClockGatingEnable +**/ + UINT8 SaSystemAgentClockGatingEnable; + +/** Offset 0x05B7 - Sa Pcie Pll Shutdown Enable + PciePllShutdownEnable +**/ + UINT8 SaPciePllShutdownEnable; + +/** Offset 0x05B8 - Sa SV_DMI_GEN1_halt + SV_DMI_GEN1_halt +**/ + UINT8 SaSV_DMI_GEN1_halt; + +/** Offset 0x05B9 - Sa SV_nFTS_DMI_auto + SV_nFTS_DMI_auto +**/ + UINT8 SaSV_nFTS_DMI_auto; + +/** Offset 0x05BA - Sa Sv DMI_nFTS + SvDMI_nFTS +**/ + UINT8 SaSvDMI_nFTS; + +/** Offset 0x05BB - Sa nFTS_auto + nFTS_auto +**/ + UINT8 SanFTS_auto; + +/** Offset 0x05BC - Sa SvPEG_nFTS + SvPEG_nFTS +**/ + UINT8 SaSvPEG_nFTS[4]; + +/** Offset 0x05C0 - Sa SvPEG_gen3_ccFTS + SvPEG_gen3_ccFTS +**/ + UINT8 SaSvPEG_gen3_ccFTS[4]; + +/** Offset 0x05C4 - Sa SvPEG_gen3_nccFTS + SvPEG_gen3_nccFTS +**/ + UINT8 SaSvPEG_gen3_nccFTS[4]; + +/** Offset 0x05C8 - Sa nFTS_gen3_auto + nFTS_gen3_auto +**/ + UINT8 SanFTS_gen3_auto; + +/** Offset 0x05C9 - Sa SVIAER + SVIAER +**/ + UINT8 SaSVIAER; + +/** Offset 0x05CA - Sa Sv Scrambler Dmi + SvScramblerDmi +**/ + UINT8 SaSvScramblerDmi; + +/** Offset 0x05CB +**/ + UINT8 UnusedUpdSpace9[1]; + +/** Offset 0x05CC - Sa Sv Scrambler Peg + SvScramblerPeg +**/ + UINT8 SaSvScramblerPeg[4]; + +/** Offset 0x05D0 - Sa Sv Dmi Serr + SvDmiSerr +**/ + UINT8 SaSvDmiSerr; + +/** Offset 0x05D1 +**/ + UINT8 UnusedUpdSpace10[3]; + +/** Offset 0x05D4 - Sa Sv Scrambler Peg Gen3 + SvScramblerPegGen3 +**/ + UINT8 SaSvScramblerPegGen3[4]; + +/** Offset 0x05D8 - Sa Sv Peg Serr + SvPegSerr +**/ + UINT8 SaSvPegSerr[4]; + +/** Offset 0x05DC - Sa Test Tx ClkGating + TestTxClkGating +**/ + UINT8 SaTestTxClkGating; + +/** Offset 0x05DD - Sa Test Rx ClkGating + TestRxClkGating +**/ + UINT8 SaTestRxClkGating; + +/** Offset 0x05DE - Sa Test Low Pwr Mode + TestLowPwrMode +**/ + UINT8 SaTestLowPwrMode; + +/** Offset 0x05DF - Sa Sr Mode + SrMode +**/ + UINT8 SaSrMode; + +/** Offset 0x05E0 - Sa Sr Seq + SrSeq +**/ + UINT8 SaSrSeq; + +/** Offset 0x05E1 - Sa Burst Spacing + BurstSpacing +**/ + UINT8 SaBurstSpacing; + +/** Offset 0x05E2 - SvPolicyEnable + Enable: SV policy is enabled, Disable(Default): SV policy is disabled + $EN_DIS +**/ + UINT8 SaRestrictedSvPolicyEnable; + +/** Offset 0x05E3 - Cpu Sv Boot Mode + 0: Auto (Default), 1: Commercial boot mode, 2: SV boot mode, 3: SV boot JTAG mode + with SB loop, 4: SV boot JTAG mode without SB loop + 0: Auto , 1: Commercial boot mode, 2: SV boot mode, 3: SV boot JTAG mode with SB + loop, 4: SV boot JTAG mode without SB loop +**/ + UINT8 SaCpuSvBootMode; + +/** Offset 0x05E4 - CpuSvBootMode + Enable: FlexCon is enabled, Disble(Default): FlexCon is disabled + $EN_DIS +**/ + UINT8 XmlCliEnable; + +/** Offset 0x05E5 - LoadValidationFv + Enable: Enable loading of ValidationFV, Disable(Default) + $EN_DIS +**/ + UINT8 LoadValidationFv; + +/** Offset 0x05E6 - SvReserveMemoryBelowPrmrr + Enable: Enable reserve SV memory below PMRR, Disable(Default) + $EN_DIS +**/ + UINT8 SvReserveMemoryBelowPrmrr; + +/** Offset 0x05E7 - Sa Test Sample Part Status Override + 0-Passthrough, 1-Production part, 2-Preproduction part +**/ + UINT8 SaTestSamplePartStatusOverride; + +/** Offset 0x05E8 - Sa Test Grunit ClockGating + Enable Sa Test Grunit ClockGating + $EN_DIS +**/ + UINT8 SaTestGrunitClockGating; + +/** Offset 0x05E9 - Sa Test Dmi Cap Reg Lock + DMI Capability Register Lock +**/ + UINT8 SaTestDmiCapRegLock; + +/** Offset 0x05EA - Sa Test Dmi Max Payload Size + DMI Max Payload Size +**/ + UINT8 SaTestDmiMaxPayloadSize; + +/** Offset 0x05EB - Sa Pcie VcLim Lock + Lock bit +**/ + UINT8 SaPcieVcLimLock; + +/** Offset 0x05EC - Sa Pcie VCm Cmp Lim + VCm Completions override +**/ + UINT8 SaPcieVCmCmpLim; + +/** Offset 0x05ED - Sa Pcie VCm PLim + posted VCm Requests override +**/ + UINT8 SaPcieVCmPLim; + +/** Offset 0x05EE - Sa Pcie VCm NpLim + non-posted VCm Requests override +**/ + UINT8 SaPcieVCmNpLim; + +/** Offset 0x05EF - Sa Laguna Credit WA + Laguna Credit WA +**/ + UINT8 SaLagunaCreditWA; + +/** Offset 0x05F0 - Sa Sv Dmi Compliance Deemphasis + SvDmiComplianceDeemphasis +**/ + UINT8 SaSvDmiComplianceDeemphasis; + +/** Offset 0x05F1 - Prefetch NonPrefetch Ratio + 0: All prefetch, 1: Seven of Eight Prefetch, 2: Three of Four Prefetch, 3: Half + Prefetch Half Non-Prefetch(Default), 4: Three of Four Non-Prefetch, 5: Seven of + Eight Prefetch, 6: All Non-prefetch + 0: All prefetch, 1: Seven of Eight Prefetch, 2: Three of Four Prefetch, 3: Half + Prefetch Half Non-Prefetch, 4: Three of Four Non-Prefetch, 5: Seven of Eight Prefetch, + 6: All Non-prefetch +**/ + UINT8 PrefetchNonPrefetchRatio; + +/** Offset 0x05F2 - SaPreMemRestrictedRsvd + Reserved for SA Pre-Mem Restricted + $EN_DIS +**/ + UINT8 SaPreMemRestrictedRsvd[30]; + +/** Offset 0x0610 - MSEG Size + MSEG Size. Valid values 0 : 512K , 1 : 1M , 2 : 1.5M , 3 : 2M , 4 : 2.4M , 5 : 3M + 0 : 512K , 1 : 1M , 2 : 1.5M , 3 : 2M , 4 : 2.4M , 5 : 3M +**/ + UINT64 MsegSize; + +/** Offset 0x0618 - Force TXT Enable + Force TXT Enable; 0: disable, 1: enable + $EN_DIS +**/ + UINT8 ForceTxtEnable; + +/** Offset 0x0619 - SaPreMemRestrictedRsvd + Reserved for SA Pre-Mem Restricted + $EN_DIS +**/ + UINT8 CpuPreMemRestrictedRsvd[23]; + +/** Offset 0x0630 - Dmi Test Tran Co Over En + Enable/Disable Lane Transmitter Coefficient. +**/ + UINT8 PchTestDmiTranCoOverEn[4]; + +/** Offset 0x0634 - Dmi Test Tran Co Over Post Cur + Lane Transmitter Post-Cursor Coefficient Override. +**/ + UINT8 PchTestDmiTranCoOverPostCur[4]; + +/** Offset 0x0638 - Dmi Test Tran Co Over Pre Cur + Lane Transmitter Pre-Cursor Coefficient Override. +**/ + UINT8 PchTestDmiTranCoOverPreCur[4]; + +/** Offset 0x063C - Dmi Test Up Port Tran Preset + Upstream Port Lane Transmitter Preset. +**/ + UINT8 PchTestDmiUpPortTranPreset[4]; + +/** Offset 0x0640 - Dmi Test UpPort Tran Preset En + 0: POR setting, 1: force enable, 2: force disable. +**/ + UINT8 PchTestDmiUpPortTranPresetEn; + +/** Offset 0x0641 - Dmi Test Rtlepceb + DMI Remote Transmit Link Equalization Preset/Coefficient Evaluation Bypass (RTLEPCEB). +**/ + UINT8 PchTestDmiRtlepceb; + +/** Offset 0x0642 - DMI ME UMA Root Space Check + DMI IOSF Root Space attribute check for RS3 for cycles targeting MEUMA. + 0: POR, 1: enable, 2: disable +**/ + UINT8 PchTestDmiMeUmaRootSpaceCheck; + +/** Offset 0x0643 - ModPhy Selection Policy + ModPhy Selection for ChipsetInitTable +**/ + UINT8 ModPhySelection; + +/** Offset 0x0644 - HECI Communication + Test, 0: POR, 1: enable, 2: disable, Disables HECI communication causing ME to enter + error state. + $EN_DIS +**/ + UINT8 HeciCommunication; + +/** Offset 0x0645 - HECI3 Interface Communication + Test, 0: POR, 1: enable, 2: disable, Adds or Removes HECI3 Device from PCI space. + $EN_DIS +**/ + UINT8 HeciCommunication3; + +/** Offset 0x0646 - Notification test for Host Reset + Test, 0: POR, 1: enable, 2: disable, Enable test for notification when Host Reset + $EN_DIS +**/ + UINT8 HostResetNotification; + +/** Offset 0x0647 - Send Manufacturing Reset And Halt On S3 Resume + Test, 0: POR, 1: enable, 2: disable, Enable sending Manufacturing Reset and Halt + on S3 Resume + $EN_DIS +**/ + UINT8 ManufRstAndHaltOnS3Resume; + +/** Offset 0x0648 - Force Unlock AES + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 ForceUnlockAes; + +/** Offset 0x0649 - PreMemRestrictedRsvd2 + Reserved for Pre-Mem RestrictedReserved + $EN_DIS +**/ + UINT8 PreMemRestrictedRsvd2[23]; + +/** Offset 0x0660 - Asynchronous ODT + This option configures the Memory Controler Asynchronous ODT control + 0:Enabled, 1:Disabled +**/ + UINT8 AsyncOdtDis; + +/** Offset 0x0661 - Power Down Mode + This option controls command bus tristating during idle periods + 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto +**/ + UINT8 PowerDownMode; + +/** Offset 0x0662 - Time Measure + Time Measure: 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 MrcTimeMeasure; + +/** Offset 0x0663 - DLL Weak Lock Support + Enables/Disable DLL Weak Lock Support + $EN_DIS +**/ + UINT8 WeaklockEn; + +/** Offset 0x0664 - Fore 1 DPC config + Enables/Disable Fore 1 DPC config + $EN_DIS +**/ + UINT8 Force1Dpc; + +/** Offset 0x0665 - Fore Single Rank config + Enables/Disable Fore Single Rank config + $EN_DIS +**/ + UINT8 ForceSingleRank; + +/** Offset 0x0666 - SelfRefresh IdleTimer + SelfRefresh IdleTimer, Default is 512 +**/ + UINT16 SrefCfgIdleTmr; + +/** Offset 0x0668 - Strong Weak Leaker + Strong Weak Leaker value. 7=def +**/ + UINT8 StrongWkLeaker; + +/** Offset 0x0669 +**/ + UINT8 MrcRestrictedRsvd0x0669[1]; + +/** Offset 0x066A - Opportunistic Read + Enables/Disable Opportunistic Read (Def= Enable) + $EN_DIS +**/ + UINT8 OpportunisticRead; + +/** Offset 0x066B - Stacked Mode + Memory Stacked Mode Support (Def = Disable) + $EN_DIS +**/ + UINT8 MemStackMode; + +/** Offset 0x066C - Stacked Mode Ch Bit + Channel hash bit used during Stacked Mode(Def= BIT28) + 0:BIT28, 1:BIT29, 2:BIT30, 3:BIT31, 4:BIT32, 5:BIT33, 6:BIT34 +**/ + UINT8 StackModeChBit; + +/** Offset 0x066D - Low Memory Channel + Selecting which Physical Channel is mapped to low memory. + 0:Channel A, 1:Channel B +**/ + UINT8 LowMemChannel; + +/** Offset 0x066E - Cycle Bypass Support + Enables/Disable Cycle Bypass Support(Def=Disable) + $EN_DIS +**/ + UINT8 Disable2CycleBypass; + +/** Offset 0x066F - MC Register Offset + Apply user offsets to select MC registers(Def=Disable) + $EN_DIS +**/ + UINT8 MCREGOFFSET; + +/** Offset 0x0670 - CA Vref Ctl Offset + Offset to be applied to DDRDATA7CH1_CR_DDRCRVREFADJUST1.CAVref + 0:-12,1:-11, 2:-10, 3:-9, 4:-8, 5:-7, 6:-6, 7:-5, 8:-4, 9:-3, 10:-2, 11:-1, 12:0, + 13:+1, 14:+2, 15:+3, 16:+4, 17:+5, 18:+6, 19:+7, 20:+8, 21:+9, 22:+10, 23:+11, + 24:+12, 0xFF:RANDOM +**/ + UINT8 CAVrefCtlOffset; + +/** Offset 0x0671 - Ch0 DQ Vref Ctrl Offset + Offset to be applied to DDRDATA7CH1_CR_DDRCRVREFADJUST1.Ch0VrefCtl + 0:-12,1:-11, 2:-10, 3:-9, 4:-8, 5:-7, 6:-6, 7:-5, 8:-4, 9:-3, 10:-2, 11:-1, 12:0, + 13:+1, 14:+2, 15:+3, 16:+4, 17:+5, 18:+6, 19:+7, 20:+8, 21:+9, 22:+10, 23:+11, + 24:+12, 0xFF:RANDOM +**/ + UINT8 Ch0VrefCtlOffset; + +/** Offset 0x0672 - Ch1 DQ Vref Ctrl Offset + Offset to be applied to DDRDATA7CH1_CR_DDRCRVREFADJUST1.Ch1VrefCtl + 0:-12,1:-11, 2:-10, 3:-9, 4:-8, 5:-7, 6:-6, 7:-5, 8:-4, 9:-3, 10:-2, 11:-1, 12:0, + 13:+1, 14:+2, 15:+3, 16:+4, 17:+5, 18:+6, 19:+7, 20:+8, 21:+9, 22:+10, 23:+11, + 24:+12, 0xFF:RANDOM +**/ + UINT8 Ch1VrefCtlOffset; + +/** Offset 0x0673 - Ch0 Clk PI Code Offset + Offset to be applied to DDRCLKCH0_CR_DDRCRCLKPICODE.PiSettingRank[0-3] + 0:-6,1:-5, 2:-4, 3:-3, 4:-2, 5:-1, 6:0, 7:1, 8:2, 9:3, 10:4, 11:5, 12:6, 0xFF:RANDOM +**/ + UINT8 Ch0ClkPiCodeOffset; + +/** Offset 0x0674 - Ch1 Clk PI Code Offset + Offset to be applied to DDRCLKCH1_CR_DDRCRCLKPICODE.PiSettingRank[0-3] + 0:-6,1:-5, 2:-4, 3:-3, 4:-2, 5:-1, 6:0, 7:1, 8:2, 9:3, 10:4, 11:5, 12:6, 0xFF:RANDOM +**/ + UINT8 Ch1ClkPiCodeOffset; + +/** Offset 0x0675 - Ch0 RcvEn Offset + Offset to be applied to DDRDATACH0_CR_DDRCRDATAOFFSETTRAIN.RcvEn + 0:-3,1:-2, 2:-1, 3:0, 4:1, 5:2, 6:3, 0xFF:RANDOM +**/ + UINT8 Ch0RcvEnOffset; + +/** Offset 0x0676 - Ch1 RcvEn Offset + Offset to be applied to DDRDATACH1_CR_DDRCRDATAOFFSETTRAIN.RcvEn + 0:-3,1:-2, 2:-1, 3:0, 4:1, 5:2, 6:3, 0xFF:RANDOM +**/ + UINT8 Ch1RcvEnOffset; + +/** Offset 0x0677 - Ch0 Rx Dqs Offset + Offset to be applied to DDRDATACH0_CR_DDRCRDATAOFFSETTRAIN.RxDqsOffset + 0:-3,1:-2, 2:-1, 3:0, 4:1, 5:2, 6:3, 0xFF:RANDOM +**/ + UINT8 Ch0RxDqsOffset; + +/** Offset 0x0678 - Ch1 Rx Dqs Offset + Offset to be applied to DDRDATACH1_CR_DDRCRDATAOFFSETTRAIN.RxDqsOffset + 0:-3,1:-2, 2:-1, 3:0, 4:1, 5:2, 6:3, 0xFF:RANDOM +**/ + UINT8 Ch1RxDqsOffset; + +/** Offset 0x0679 - Ch0 Tx Dq Offset + Offset to be applied to DDRDATACH0_CR_DDRCRDATAOFFSETTRAIN.TxDqOffset + 0:-3,1:-2, 2:-1, 3:0, 4:1, 5:2, 6:3, 0xFF:RANDOM +**/ + UINT8 Ch0TxDqOffset; + +/** Offset 0x067A - Ch1 Tx Dq Offset + Offset to be applied to DDRDATACH1_CR_DDRCRDATAOFFSETTRAIN.TxDqOffset + 0:-3,1:-2, 2:-1, 3:0, 4:1, 5:2, 6:3, 0xFF:RANDOM +**/ + UINT8 Ch1TxDqOffset; + +/** Offset 0x067B - Ch0 Tx Dqs Offset + Offset to be applied to DDRDATACH0_CR_DDRCRDATAOFFSETTRAIN.TxDqsOffset + 0:-3,1:-2, 2:-1, 3:0, 4:1, 5:2, 6:3, 0xFF:RANDOM +**/ + UINT8 Ch0TxDqsOffset; + +/** Offset 0x067C - Ch1 Tx Dqs Offset + Offset to be applied to DDRDATACH1_CR_DDRCRDATAOFFSETTRAIN.TxDqsOffset + 0:-3,1:-2, 2:-1, 3:0, 4:1, 5:2, 6:3, 0xFF:RANDOM +**/ + UINT8 Ch1TxDqsOffset; + +/** Offset 0x067D - Ch0 Vref Offset + Offset to be applied to DDRDATACH0_CR_DDRCRDATAOFFSETTRAIN.VrefOffset + 0:-6,1:-5, 2:-4, 3:-3, 4:-2, 5:-1, 6:0, 7:1, 8:2, 9:3, 10:4, 11:5, 12:6, 0xFF:RANDOM +**/ + UINT8 Ch0VrefOffset; + +/** Offset 0x067E - Ch1 Vref Offset + Offset to be applied to DDRDATACH1_CR_DDRCRDATAOFFSETTRAIN.VrefOffset + 0:-6,1:-5, 2:-4, 3:-3, 4:-2, 5:-1, 6:0, 7:1, 8:2, 9:3, 10:4, 11:5, 12:6, 0xFF:RANDOM +**/ + UINT8 Ch1VrefOffset; + +/** Offset 0x067F - tRRSG + Delay between Read-to-Read commands in the same Bank Group for DDR4 or Same Rank + for DDR3/LPDDR3. 0-Auto, Range 4-54. +**/ + UINT8 tRRSG; + +/** Offset 0x0680 - tRRDG + Delay between Read-to-Read commands in different Bank Group for DDR4 or Same Rank + for DDR3/LPDDR3. 0-Auto, Range 4-54. +**/ + UINT8 tRRDG; + +/** Offset 0x0681 - tRRDR + Delay between Read-to-Read commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tRRDR; + +/** Offset 0x0682 - tRRDD + Delay between Read-to-Read commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tRRDD; + +/** Offset 0x0683 - tWRSG + Delay between Write-to-Read commands in the same Bank Group for DDR4 or Same Rank + for DDR3/LPDDR3. 0-Auto, Range 4-86. +**/ + UINT8 tWRSG; + +/** Offset 0x0684 - tWRDG + Delay between Write-to-Read commands in different Bank Group for DDR4 or Same Rank + for DDR3/LPDDR3. 0-Auto, Range 4-54. +**/ + UINT8 tWRDG; + +/** Offset 0x0685 - tWRDR + Delay between Write-to-Read commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tWRDR; + +/** Offset 0x0686 - tWRDD + Delay between Write-to-Read commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tWRDD; + +/** Offset 0x0687 - tWWSG + Delay between Write-to-Write commands in the same Bank Group for DDR4 or Same Rank + for DDR3/LPDDR3. 0-Auto, Range 4-54. +**/ + UINT8 tWWSG; + +/** Offset 0x0688 - tWWDG + Delay between Write-to-Write commands in different Bank Group for DDR4 or Same Rank + for DDR3/LPDDR3. 0-Auto, Range 4-54. +**/ + UINT8 tWWDG; + +/** Offset 0x0689 - tWWDR + Delay between Write-to-Write commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tWWDR; + +/** Offset 0x068A - tWWDD + Delay between Write-to-Write commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tWWDD; + +/** Offset 0x068B - tRWSG + Delay between Read-to-Write commands in the same Bank Group for DDR4 or Same Rank + for DDR3/LPDDR3. 0-Auto, Range 4-54. +**/ + UINT8 tRWSG; + +/** Offset 0x068C - tRWDG + Delay between Read-to-Write commands in different Bank Group for DDR4 or Same Rank + for DDR3/LPDDR3. 0-Auto, Range 4-54. +**/ + UINT8 tRWDG; + +/** Offset 0x068D - tRWDR + Delay between Read-to-Write commands in different Ranks. 0-Auto, Range 4-54. +**/ + UINT8 tRWDR; + +/** Offset 0x068E - tRWDD + Delay between Read-to-Write commands in different DIMMs. 0-Auto, Range 4-54. +**/ + UINT8 tRWDD; + +/** Offset 0x068F - DCTT Test + Select which test to run + 0:Basic walking memory test, 1:Row Hammer test +**/ + UINT8 DcttTest; + +/** Offset 0x0690 - DCTT: Iterations on Row + Number of repetitions on a Row +**/ + UINT8 DcttRhIterationOnRow; + +/** Offset 0x0691 - Page Close Delay Prompt + SubSequence Delay value used to ensure the page closes (In DClks) +**/ + UINT8 DcttRhPageCloseDelay; + +/** Offset 0x0692 - Row Hammer Refresh + Enable/Disables refreshes during the Row Hammer Test + $EN_DIS +**/ + UINT8 DcttRhRefreshEnable; + +/** Offset 0x0693 - Data Base + Select which data pattern that is used as the base pattern + 0:Zeros, 1:Ones, 2:Five, 3:A +**/ + UINT8 DcttDataBase; + +/** Offset 0x0694 - DCTT: Row Hammer Count + Number of Hammers for a given Row. +**/ + UINT32 DcttRhHammerCount; + +/** Offset 0x0698 - Row swizzle + Select which Row swizzle algorithm to use during Row Hammer test + 0:No Swizzle, 1:3xOr1_3xOr2, 2:01234567EFCDAB89 +**/ + UINT8 DcttRowSwizzleType; + +/** Offset 0x0699 - Refresh Multiplier + Multiplier applied to tREFI +**/ + UINT8 DcttRefreshMultiplier; + +/** Offset 0x069A - Bank Disable Mask + Bit Mask Bank Disable for per-Bank tests (Row Hammer) +**/ + UINT8 DcttBankDisableMask; + +/** Offset 0x069B - Clock Gate AB + Clock Gate AB + 0:Disable, 1:2 Cycles, 2:3 Cycles, 3:4 Cycles +**/ + UINT8 ScramClockGateAB; + +/** Offset 0x069C - Clock Gate C + Select which Row swizzle algorithm to use during Row Hammer test + 0:Disable, 1:2 Cycles, 2:4 Cycles, 3:8 Cycles +**/ + UINT8 ScramClockGateC; + +/** Offset 0x069D - Enable DBI AB + Enable DBI AB + $EN_DIS +**/ + UINT8 ScramEnableDbiAB; + +/** Offset 0x069E - MRC Interpreter + Select CMOS location match of DD01 or Ctrl-Break key or force entry + 0:CMOS, 1:Break, 2:Force +**/ + UINT8 Interpreter; + +/** Offset 0x069F - ODT mode + ODT mode + 0:Default, 1:Ctt, 2:Vtt, 3:Vddq, 4:Vss,5:Max +**/ + UINT8 IoOdtMode; + +/** Offset 0x06A0 - Lock DPR register + Lock DPR register. <b>0: Platform POR </b>; 1: Enable; 2: Disable + 0:Platform POR, 1: Enable, 2: Disable +**/ + UINT8 TestMenuDprLock; + +/** Offset 0x06A1 - PerBankRefresh + Control of Per Bank Refresh feature for LPDDR DRAMs + $EN_DIS +**/ + UINT8 PerBankRefresh; + +/** Offset 0x06A2 - Command Tristate + Enables/Disable Command Tristate + $EN_DIS +**/ + UINT8 CmdTriStateDis; + +/** Offset 0x06A3 +**/ + UINT8 MrcRestrictedRsvd[1]; + +/** Offset 0x06A4 +**/ + UINT8 ReservedFspmRestrictedUpd[26]; +} FSP_M_RESTRICTED_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPM_ARCH_UPD FspmArchUpd; + +/** Offset 0x0040 +**/ + FSP_M_CONFIG FspmConfig; + +/** Offset 0x0520 +**/ + FSP_M_TEST_CONFIG FspmTestConfig; + +/** Offset 0x05B0 +**/ + FSP_M_RESTRICTED_CONFIG FspmRestrictedConfig; + +/** Offset 0x06BE +**/ + UINT16 UpdTerminator; +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h new file mode 100644 index 0000000000..ab48513570 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/FspsUpd.h @@ -0,0 +1,4027 @@ +/** @file + +Copyright (c) 2017, Intel Corporation. All rights reserved.<BR> + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include <FspUpd.h> + +#pragma pack(1) + + +/// +/// Azalia Header structure +/// +typedef struct { + UINT16 VendorId; ///< Codec Vendor ID + UINT16 DeviceId; ///< Codec Device ID + UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. + UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. + UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. + UINT32 Reserved; ///< Reserved for future use. Must be set to 0. +} AZALIA_HEADER; + +/// +/// Audio Azalia Verb Table structure +/// +typedef struct { + AZALIA_HEADER Header; ///< AZALIA PCH header + UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header +} AUDIO_AZALIA_VERB_TABLE; + +/// +/// Refer to the definition of PCH_INT_PIN +/// +typedef enum { + SiPchNoInt, ///< No Interrupt Pin + SiPchIntA, + SiPchIntB, + SiPchIntC, + SiPchIntD +} SI_PCH_INT_PIN; +/// +/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. +/// +typedef struct { + UINT8 Device; ///< Device number + UINT8 Function; ///< Device function + UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) + UINT8 Irq; ///< IRQ to be set for device. +} SI_PCH_DEVICE_INTERRUPT_CONFIG; + +#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices + + +/** Fsp S Configuration +**/ +typedef struct { + +/** Offset 0x0020 - Logo Pointer + Points to PEI Display Logo Image +**/ + UINT32 LogoPtr; + +/** Offset 0x0024 - Logo Size + Size of PEI Display Logo Image +**/ + UINT32 LogoSize; + +/** Offset 0x0028 - Graphics Configuration Ptr + Points to VBT +**/ + UINT32 GraphicsConfigPtr; + +/** Offset 0x002C - Enable Device 4 + Enable/disable Device 4 + $EN_DIS +**/ + UINT8 Device4Enable; + +/** Offset 0x002D - Enable HD Audio DSP + Enable/disable HD Audio DSP feature. + $EN_DIS +**/ + UINT8 PchHdaDspEnable; + +/** Offset 0x002E +**/ + UINT8 UnusedUpdSpace0[3]; + +/** Offset 0x0031 - Enable eMMC Controller + Enable/disable eMMC Controller. + $EN_DIS +**/ + UINT8 ScsEmmcEnabled; + +/** Offset 0x0032 - Enable eMMC HS400 Mode + Enable eMMC HS400 Mode. + $EN_DIS +**/ + UINT8 ScsEmmcHs400Enabled; + +/** Offset 0x0033 - Enable SdCard Controller + Enable/disable SD Card Controller. + $EN_DIS +**/ + UINT8 ScsSdCardEnabled; + +/** Offset 0x0034 - Show SPI controller + Enable/disable to show SPI controller. + $EN_DIS +**/ + UINT8 ShowSpiController; + +/** Offset 0x0035 +**/ + UINT8 UnusedUpdSpace1[3]; + +/** Offset 0x0038 - MicrocodeRegionBase + Memory Base of Microcode Updates +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x003C - MicrocodeRegionSize + Size of Microcode Updates +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x0040 - Turbo Mode + Enable/Disable Turbo mode. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 TurboMode; + +/** Offset 0x0041 - Enable SATA SALP Support + Enable/disable SATA Aggressive Link Power Management. + $EN_DIS +**/ + UINT8 SataSalpSupport; + +/** Offset 0x0042 - Enable SATA ports + Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, + and so on. +**/ + UINT8 SataPortsEnable[8]; + +/** Offset 0x004A - Enable SATA DEVSLP Feature + Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each + port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlp[8]; + +/** Offset 0x0052 - Enable USB2 ports + Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb20Enable[16]; + +/** Offset 0x0062 - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb30Enable[10]; + +/** Offset 0x006C - Enable xDCI controller + Enable/disable to xDCI controller. + $EN_DIS +**/ + UINT8 XdciEnable; + +/** Offset 0x006D +**/ + UINT8 UnusedUpdSpace2[2]; + +/** Offset 0x006F - Enable SerialIo Device Mode + 0:Disabled, 1:PCI Mode, 2:Acpi mode, 3:Hidden mode (Legacy UART mode) - Enable/disable + SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5,SPI0,SPI1,SPI2,UART0,UART1,UART2 device + mode respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, + and so on. +**/ + UINT8 SerialIoDevMode[12]; + +/** Offset 0x007B - Address of PCH_DEVICE_INTERRUPT_CONFIG table. + The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. +**/ + UINT32 DevIntConfigPtr; + +/** Offset 0x007F - Number of DevIntConfig Entry + Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr + must not be NULL. +**/ + UINT8 NumOfDevIntConfig; + +/** Offset 0x0080 - PIRQx to IRQx Map Config + PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for + PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy + 8259 PCI mode. +**/ + UINT8 PxRcConfig[8]; + +/** Offset 0x0088 - Select GPIO IRQ Route + GPIO IRQ Select. The valid value is 14 or 15. +**/ + UINT8 GpioIrqRoute; + +/** Offset 0x0089 - Select SciIrqSelect + SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. +**/ + UINT8 SciIrqSelect; + +/** Offset 0x008A - Select TcoIrqSelect + TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. +**/ + UINT8 TcoIrqSelect; + +/** Offset 0x008B - Enable/Disable Tco IRQ + Enable/disable TCO IRQ + $EN_DIS +**/ + UINT8 TcoIrqEnable; + +/** Offset 0x008C - PCH HDA Verb Table Entry Number + Number of Entries in Verb Table. +**/ + UINT8 PchHdaVerbTableEntryNum; + +/** Offset 0x008D - PCH HDA Verb Table Pointer + Pointer to Array of pointers to Verb Table. +**/ + UINT32 PchHdaVerbTablePtr; + +/** Offset 0x0091 - PCH HDA Codec Sx Wake Capability + Capability to detect wake initiated by a codec in Sx +**/ + UINT8 PchHdaCodecSxWakeCapability; + +/** Offset 0x0092 - Enable SATA + Enable/disable SATA controller. + $EN_DIS +**/ + UINT8 SataEnable; + +/** Offset 0x0093 - SATA Mode + Select SATA controller working mode. + 0:AHCI, 1:RAID +**/ + UINT8 SataMode; + +/** Offset 0x0094 - USB Per Port HS Preemphasis Bias + USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. +**/ + UINT8 Usb2AfePetxiset[16]; + +/** Offset 0x00A4 - USB Per Port HS Transmitter Bias + USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. +**/ + UINT8 Usb2AfeTxiset[16]; + +/** Offset 0x00B4 - USB Per Port HS Transmitter Emphasis + USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, + 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. +**/ + UINT8 Usb2AfePredeemp[16]; + +/** Offset 0x00C4 - USB Per Port Half Bit Pre-emphasis + USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. + One byte for each port. +**/ + UINT8 Usb2AfePehalfbit[16]; + +/** Offset 0x00D4 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment + Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmphEnable[10]; + +/** Offset 0x00DE - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting + USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], + <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmph[10]; + +/** Offset 0x00E8 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment + Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmpEnable[10]; + +/** Offset 0x00F2 - USB 3.0 TX Output Downscale Amplitude Adjustment + USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default + = 00h</b>. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmp[10]; + +/** Offset 0x00FC - Enable LAN + Enable/disable LAN controller. + $EN_DIS +**/ + UINT8 PchLanEnable; + +/** Offset 0x00FD - Enable HD Audio Link + Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkHda; + +/** Offset 0x00FE - Enable HD Audio DMIC0 Link + Enable/disable HD Audio DMIC0 link. Muxed with SNDW4. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkDmic0; + +/** Offset 0x00FF - Enable HD Audio DMIC1 Link + Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkDmic1; + +/** Offset 0x0100 - Enable HD Audio SSP0 Link + Enable/disable HD Audio SSP0/I2S link. Muxed with HDA. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp0; + +/** Offset 0x0101 - Enable HD Audio SSP1 Link + Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp1; + +/** Offset 0x0102 - Enable HD Audio SSP2 Link + Enable/disable HD Audio SSP2/I2S link. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSsp2; + +/** Offset 0x0103 - Enable HD Audio SoundWire#1 Link + Enable/disable HD Audio SNDW1 link. Muxed with HDA. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw1; + +/** Offset 0x0104 - Enable HD Audio SoundWire#2 Link + Enable/disable HD Audio SNDW2 link. Muxed with SSP1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw2; + +/** Offset 0x0105 - Enable HD Audio SoundWire#3 Link + Enable/disable HD Audio SNDW3 link. Muxed with DMIC1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw3; + +/** Offset 0x0106 - Enable HD Audio SoundWire#4 Link + Enable/disable HD Audio SNDW4 link. Muxed with DMIC0. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkSndw4; + +/** Offset 0x0107 - Soundwire Clock Buffer GPIO RCOMP Setting + 0: non-ACT - 50 Ohm driver impedance, 1: ACT - 8 Ohm driver impedance. + $EN_DIS +**/ + UINT8 PchHdaSndwBufferRcomp; + +/** Offset 0x0108 - PTM for PCIE RP Mask + Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpPtmMask; + +/** Offset 0x010C - DPC for PCIE RP Mask + Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpDpcMask; + +/** Offset 0x0110 - DPC Extensions PCIE RP Mask + Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit + for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpDpcExtensionsMask; + +/** Offset 0x0114 - USB PDO Programming + Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming + during later phase. 1: enable, 0: disable + $EN_DIS +**/ + UINT8 UsbPdoProgramming; + +/** Offset 0x0115 - Power button debounce configuration + Debounce time for PWRBTN in microseconds. For values not supported by HW, they will + be rounded down to closest supported on. 0: disable, 250-1024000us: supported range +**/ + UINT32 PmcPowerButtonDebounce; + +/** Offset 0x0119 - PCH eSPI Master and Slave BME enabled + PCH eSPI Master and Slave BME enabled + $EN_DIS +**/ + UINT8 PchEspiBmeMasterSlaveEnabled; + +/** Offset 0x011A - PCH SATA use RST Legacy OROM + Use PCH SATA RST Legacy OROM when CSM is Enabled + $EN_DIS +**/ + UINT8 SataRstLegacyOrom; + +/** Offset 0x011B - PchPostMemRsvd + Reserved for PCH Post-Mem + $EN_DIS +**/ + UINT8 PchPostMemRsvd[42]; + +/** Offset 0x0145 - Enable Ufs Controller + Enable/disable Ufs 2.0 Controller. + $EN_DIS +**/ + UINT8 ScsUfsEnabled; + +/** Offset 0x0146 - CNVi Configuration + This option allows for automatic detection of Connectivity Solution. [Auto Detection] + assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. + 0:Disable, 1:Auto +**/ + UINT8 PchCnviMode; + +/** Offset 0x0147 +**/ + UINT8 UnusedUpdSpace3; + +/** Offset 0x0148 - CNVi BT Interface + This option configures BT device interface to either USB or UART + 0:UART, 1:USB +**/ + UINT8 PchCnviBtInterface; + +/** Offset 0x0149 - PCH USB OverCurrent mapping enable + 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin + mapping allow for NOA usage of OC pins + $EN_DIS +**/ + UINT8 PchUsbOverCurrentEnable; + +/** Offset 0x014A - CNVi BT Uart Type + This is a test option which allows configuration of UART type for BT communication + 0:Serial IO Uart0, 1:ISH Uart0, 2:Uart over external pads +**/ + UINT8 PchCnviBtUartType; + +/** Offset 0x014B - CNVi MfUart1 Type + This option configures Uart type which connects to MfUart1 + 0:ISH Uart0, 1:SerialIO Uart2, 2:Uart over external pads +**/ + UINT8 PchCnviMfUart1Type; + +/** Offset 0x014C - Espi Lgmr Memory Range decode + This option enables or disables espi lgmr + $EN_DIS +**/ + UINT8 PchEspiLgmrEnable; + +/** Offset 0x014D - HECI3 state + The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed. + 0: disable, 1: enable + $EN_DIS +**/ + UINT8 Heci3Enabled; + +/** Offset 0x014E +**/ + UINT8 UnusedUpdSpace4; + +/** Offset 0x014F - PCHHOT# pin + Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchHotEnable; + +/** Offset 0x0150 - SATA LED + SATA LED indicating SATA controller activity. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 SataLedEnable; + +/** Offset 0x0151 - VRAlert# Pin + When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling + to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmVrAlert; + +/** Offset 0x0152 - SLP_S0 VM Dynamic Control + SLP_S0 Voltage Margining Runtime Control Policy. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmSlpS0VmRuntimeControl; + +/** Offset 0x0153 - SLP_S0 VM 0.70V Support + SLP_S0 Voltage Margining 0.70V Support Policy. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmSlpS0Vm070VSupport; + +/** Offset 0x0154 - SLP_S0 VM 0.75V Support + SLP_S0 Voltage Margining 0.75V Support Policy. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmSlpS0Vm075VSupport; + +/** Offset 0x0155 - AMT Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. + $EN_DIS +**/ + UINT8 AmtEnabled; + +/** Offset 0x0156 - WatchDog Timer Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. + $EN_DIS +**/ + UINT8 WatchDog; + +/** Offset 0x0157 - ASF Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable ASF functionality. + $EN_DIS +**/ + UINT8 AsfEnabled; + +/** Offset 0x0158 - Manageability Mode set by Mebx + Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode. + $EN_DIS +**/ + UINT8 ManageabilityMode; + +/** Offset 0x0159 - PET Progress + Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive + PET Events. + $EN_DIS +**/ + UINT8 FwProgress; + +/** Offset 0x015A - SOL Switch + Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx + $EN_DIS +**/ + UINT8 AmtSolEnabled; + +/** Offset 0x015B - OS Timer + 16 bits Value, Set OS watchdog timer. + $EN_DIS +**/ + UINT16 WatchDogTimerOs; + +/** Offset 0x015D - BIOS Timer + 16 bits Value, Set BIOS watchdog timer. + $EN_DIS +**/ + UINT16 WatchDogTimerBios; + +/** Offset 0x015F +**/ + UINT8 UnusedUpdSpace5[4]; + +/** Offset 0x0163 - PCH PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 PcieRpSlotImplemented[24]; + +/** Offset 0x017B - Usage type for ClkSrc + 0-23: PCH rootport, 0x40: LAN, 0x80: unspecified but in use, 0xFF: not used +**/ + UINT8 PcieClkSrcUsage[16]; + +/** Offset 0x018B - ClkReq-to-ClkSrc mapping + Number of ClkReq signal assigned to ClkSrc +**/ + UINT8 PcieClkSrcClkReq[16]; + +/** Offset 0x019B - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 PcieRpAcsEnabled[24]; + +/** Offset 0x01B3 - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 PcieRpEnableCpm[24]; + +/** Offset 0x01CB - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 PcieRpDetectTimeoutMs[24]; + +/** Offset 0x01FB +**/ + UINT8 UnusedUpdSpace6[5]; + +/** Offset 0x0200 - Enable/Disable SA CRID + Enable: SA CRID, Disable (Default): SA CRID + $EN_DIS +**/ + UINT8 CridEnable; + +/** Offset 0x0201 - DMI ASPM + 0=Disable, 2(Default)=L1 + 0:Disable, 2:L1 +**/ + UINT8 DmiAspm; + +/** Offset 0x0202 - PCIe DeEmphasis control per root port + 0: -6dB, 1(Default): -3.5dB + 0:-6dB, 1:-3.5dB +**/ + UINT8 PegDeEmphasis[4]; + +/** Offset 0x0206 - PCIe Slot Power Limit value per root port + Slot power limit value per root port +**/ + UINT8 PegSlotPowerLimitValue[4]; + +/** Offset 0x020A - PCIe Slot Power Limit scale per root port + Slot power limit scale per root port + 0:1.0x, 1:0.1x, 2:0.01x, 3:0x001x +**/ + UINT8 PegSlotPowerLimitScale[4]; + +/** Offset 0x020E - PCIe Physical Slot Number per root port + Physical Slot Number per root port +**/ + UINT16 PegPhysicalSlotNumber[4]; + +/** Offset 0x0216 - Enable/Disable PavpEnable + Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable + $EN_DIS +**/ + UINT8 PavpEnable; + +/** Offset 0x0217 - CdClock Frequency selection + 0=168 Mhz, 1=336 Mhz, 2(Default)=528 Mhz + 0: 168 Mhz, 1: 336 Mhz, 2: 528 Mhz +**/ + UINT8 CdClock; + +/** Offset 0x0218 - Enable/Disable PeiGraphicsPeimInit + Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit + $EN_DIS +**/ + UINT8 PeiGraphicsPeimInit; + +/** Offset 0x0219 +**/ + UINT8 UnusedUpdSpace7; + +/** Offset 0x021A - Enable or disable GNA device + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 GnaEnable; + +/** Offset 0x021B - State of X2APIC_OPT_OUT bit in the DMAR table + 0=Disable/Clear, 1(Default)=Enable/Set + $EN_DIS +**/ + UINT8 X2ApicOptOut; + +/** Offset 0x021C - Base addresses for VT-d function MMIO access + Base addresses for VT-d MMIO access per VT-d engine +**/ + UINT32 VtdBaseAddress[3]; + +/** Offset 0x0228 - Enable or disable eDP device + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortEdp; + +/** Offset 0x0229 - Enable or disable HPD of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBHpd; + +/** Offset 0x022A - Enable or disable HPD of DDI port C + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortCHpd; + +/** Offset 0x022B - Enable or disable HPD of DDI port D + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortDHpd; + +/** Offset 0x022C - Enable or disable HPD of DDI port F + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortFHpd; + +/** Offset 0x022D - Enable or disable DDC of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBDdc; + +/** Offset 0x022E - Enable or disable DDC of DDI port C + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortCDdc; + +/** Offset 0x022F - Enable or disable DDC of DDI port D + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortDDdc; + +/** Offset 0x0230 - Enable or disable DDC of DDI port F + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortFDdc; + +/** Offset 0x0231 - SaPostMemProductionRsvd + Reserved for SA Post-Mem Production + $EN_DIS +**/ + UINT8 SaPostMemProductionRsvd[70]; + +/** Offset 0x0277 - Advanced Encryption Standard (AES) feature + Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable + $EN_DIS +**/ + UINT8 AesEnable; + +/** Offset 0x0278 - Power State 3 enable/disable + PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>. + For all VR Indexes +**/ + UINT8 Psi3Enable[5]; + +/** Offset 0x027D - Power State 4 enable/disable + PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For + all VR Indexes +**/ + UINT8 Psi4Enable[5]; + +/** Offset 0x0282 - Imon slope correction + PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. + Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes +**/ + UINT8 ImonSlope[5]; + +/** Offset 0x0287 - Imon offset correction + PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. + Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b> +**/ + UINT8 ImonOffset[5]; + +/** Offset 0x028C - Enable/Disable BIOS configuration of VR + Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes +**/ + UINT8 VrConfigEnable[5]; + +/** Offset 0x0291 - Thermal Design Current enable/disable + PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1: + Enable.For all VR Indexes +**/ + UINT8 TdcEnable[5]; + +/** Offset 0x0296 - HECI3 state + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - 6ms , 7 - 7ms + , 8 - 8ms , 10 - 10ms.For all VR Indexe +**/ + UINT8 TdcTimeWindow[5]; + +/** Offset 0x029B - Thermal Design Current Lock + PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For + all VR Indexes +**/ + UINT8 TdcLock[5]; + +/** Offset 0x02A0 - Platform Psys slope correction + PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in + 1/100 increment values. Range is 0-200. 125 = 1.25 +**/ + UINT8 PsysSlope; + +/** Offset 0x02A1 - Platform Psys offset correction + PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/4, + Range 0-255. Value of 100 = 100/4 = 25 offset +**/ + UINT8 PsysOffset; + +/** Offset 0x02A2 - Acoustic Noise Mitigation feature + Enable or Disable Acoustic Noise Mitigation feature. <b>0: Disabled</b>; 1: Enabled + $EN_DIS +**/ + UINT8 AcousticNoiseMitigation; + +/** Offset 0x02A3 - Disable Fast Slew Rate for Deep Package C States for VR IA domain + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. <b>0: False</b>; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisableIa; + +/** Offset 0x02A4 - Slew Rate configuration for Deep Package C States for VR IA domain + Slew Rate configuration for Deep Package C States for VR IA domain based on Acoustic + Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRateForIa; + +/** Offset 0x02A5 - Slew Rate configuration for Deep Package C States for VR GT domain + Slew Rate configuration for Deep Package C States for VR GT domain based on Acoustic + Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRateForGt; + +/** Offset 0x02A6 - Slew Rate configuration for Deep Package C States for VR SA domain + Slew Rate configuration for Deep Package C States for VR SA domain based on Acoustic + Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRateForSa; + +/** Offset 0x02A7 - Thermal Design Current current limit + PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. + Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes +**/ + UINT16 TdcPowerLimit[5]; + +/** Offset 0x02B1 - AcLoadline + PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249. <b>Intel Recommended Defaults vary by domain and SKU. +**/ + UINT16 AcLoadline[5]; + +/** Offset 0x02BB +**/ + UINT8 UnusedUpdSpace8[10]; + +/** Offset 0x02C5 - DcLoadline + PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b> +**/ + UINT16 DcLoadline[5]; + +/** Offset 0x02CF - Power State 1 Threshold current + PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi1Threshold[5]; + +/** Offset 0x02D9 - Power State 2 Threshold current + PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi2Threshold[5]; + +/** Offset 0x02E3 - Power State 3 Threshold current + PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi3Threshold[5]; + +/** Offset 0x02ED - Icc Max limit + PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A +**/ + UINT16 IccMax[5]; + +/** Offset 0x02F7 - VR Voltage Limit + PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV. +**/ + UINT16 VrVoltageLimit[5]; + +/** Offset 0x0301 - Disable Fast Slew Rate for Deep Package C States for VR GT domain + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. <b>0: False</b>; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisableGt; + +/** Offset 0x0302 - Disable Fast Slew Rate for Deep Package C States for VR SA domain + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. <b>0: False</b>; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisableSa; + +/** Offset 0x0303 - Enable VR specific mailbox command + VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A + VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific + command sent for PS4 exit issue. 11b - Reserved. + $EN_DIS +**/ + UINT8 SendVrMbxCmd; + +/** Offset 0x0304 - Enable or Disable VMX + Enable or Disable VMX; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x0305 - Enable or Disable TXT + Enable or Disable TXT; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 TxtEnable; + +/** Offset 0x0306 +**/ + UINT8 UnusedUpdSpace9[6]; + +/** Offset 0x030C - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. </b>0: Initialize; <b>1: Skip + $EN_DIS +**/ + UINT8 SkipMpInit; + +/** Offset 0x030D - McIVR RFI Frequency Prefix + PCODE MMIO Mailbox: McIVR RFI Frequency Adjustment Prefix. <b>0: Plus (+)</b>; 1: + Minus (-). +**/ + UINT8 McivrRfiFrequencyPrefix; + +/** Offset 0x030E - McIVR RFI Frequency Adjustment + PCODE MMIO Mailbox: Adjust the RFI frequency relative to the nominal frequency in + increments of 100KHz. For subtraction, change McivrRfiFrequencyPrefix. <b>0: Auto</b>. +**/ + UINT16 McivrRfiFrequencyAdjust; + +/** Offset 0x0310 - FIVR RFI Frequency + PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0: + Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock; + 0-1535 (Up to 153.5MHz) for 19MHz clock. +**/ + UINT16 FivrRfiFrequency; + +/** Offset 0x0312 - McIVR RFI Spread Spectrum + PCODE MMIO Mailbox: McIVR RFI Spread Spectrum. <b>0: 0%</b>; 1: +/- 0.5%; 2: +/- + 1%; 3: +/- 1.5%; 4: +/- 2%; 5: +/- 3%; 6: +/- 4%; 7: +/- 5%; 8: +/- 6%. +**/ + UINT8 McivrSpreadSpectrum; + +/** Offset 0x0313 - FIVR RFI Spread Spectrum + PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments. <b>0: 0%</b>; + Range: 0.0% to 10.0% (0-100). +**/ + UINT8 FivrSpreadSpectrum; + +/** Offset 0x0314 - Disable Fast Slew Rate for Deep Package C States for VR FIVR domain + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. <b>0: False</b>; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisableFivr; + +/** Offset 0x0315 - Slew Rate configuration for Deep Package C States for VR FIVR domain + Slew Rate configuration for Deep Package C States for VR FIVR domain based on Acoustic + Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRateForFivr; + +/** Offset 0x0316 - CpuBistData + Pointer CPU BIST Data +**/ + UINT32 CpuBistData; + +/** Offset 0x031A - ReservedCpuPostMemProduction + Reserved for CPU Post-Mem Production + $EN_DIS +**/ + UINT8 ReservedCpuPostMemProduction[17]; + +/** Offset 0x032B +**/ + UINT8 UnusedUpdSpace10[27]; + +/** Offset 0x0346 - Enable DMI ASPM + ASPM on PCH side of the DMI Link. + $EN_DIS +**/ + UINT8 PchDmiAspm; + +/** Offset 0x0347 - Enable Power Optimizer + Enable DMI Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 PchPwrOptEnable; + +/** Offset 0x0348 - PCH Flash Protection Ranges Write Enble + Write or erase is blocked by hardware. +**/ + UINT8 PchWriteProtectionEnable[5]; + +/** Offset 0x034D - PCH Flash Protection Ranges Read Enble + Read is blocked by hardware. +**/ + UINT8 PchReadProtectionEnable[5]; + +/** Offset 0x0352 - PCH Protect Range Limit + Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for + limit comparison. +**/ + UINT16 PchProtectedRangeLimit[5]; + +/** Offset 0x035C - PCH Protect Range Base + Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. +**/ + UINT16 PchProtectedRangeBase[5]; + +/** Offset 0x0366 - Enable Pme + Enable Azalia wake-on-ring. + $EN_DIS +**/ + UINT8 PchHdaPme; + +/** Offset 0x0367 +**/ + UINT8 UnusedUpdSpace11; + +/** Offset 0x0368 - VC Type + Virtual Channel Type Select: 0: VC0, 1: VC1. + 0: VC0, 1: VC1 +**/ + UINT8 PchHdaVcType; + +/** Offset 0x0369 - HD Audio Link Frequency + HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. + 0: 6MHz, 1: 12MHz, 2: 24MHz +**/ + UINT8 PchHdaLinkFrequency; + +/** Offset 0x036A - iDisp-Link Frequency + iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. + 4: 96MHz, 3: 48MHz +**/ + UINT8 PchHdaIDispLinkFrequency; + +/** Offset 0x036B - iDisp-Link T-mode + iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 1: 1T. + 0: 2T, 1: 1T +**/ + UINT8 PchHdaIDispLinkTmode; + +/** Offset 0x036C - Universal Audio Architecture compliance for DSP enabled system + 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox + driver or SST driver supported). + $EN_DIS +**/ + UINT8 PchHdaDspUaaCompliance; + +/** Offset 0x036D - iDisplay Audio Codec disconnection + 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. + $EN_DIS +**/ + UINT8 PchHdaIDispCodecDisconnect; + +/** Offset 0x036E - DSP DMIC Select (PCH_HDAUDIO_DMIC_TYPE enum) + 0: Disable; 1: 2ch array; 2: 4ch array; 3: 1ch array. + 0: Disable, 1: 2ch array, 2: 4ch array, 3: 1ch array +**/ + UINT8 PchHdaDspEndpointDmic; + +/** Offset 0x036F - DSP Bluetooth enablement + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchHdaDspEndpointBluetooth; + +/** Offset 0x0370 - DSP I2S enablement + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchHdaDspEndpointI2s; + +/** Offset 0x0371 - Bitmask of supported DSP features + [BIT0] - WoV; [BIT1] - BT Sideband; [BIT2] - Codec VAD; [BIT5] - BT Intel HFP; [BIT6] + - BT Intel A2DP; [BIT7] - DSP based speech pre-processing disabled; [BIT8] - 0: + Intel WoV, 1: Windows Voice Activation. +**/ + UINT32 PchHdaDspFeatureMask; + +/** Offset 0x0375 +**/ + UINT8 UnusedUpdSpace12[8]; + +/** Offset 0x037D - Enable PCH Io Apic Entry 24-119 + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIoApicEntry24_119; + +/** Offset 0x037E - PCH Io Apic ID + This member determines IOAPIC ID. Default is 0x02. +**/ + UINT8 PchIoApicId; + +/** Offset 0x037F +**/ + UINT8 UnusedUpdSpace13; + +/** Offset 0x0380 - Enable PCH ISH SPI GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshSpiGpioAssign; + +/** Offset 0x0381 - Enable PCH ISH UART0 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshUart0GpioAssign; + +/** Offset 0x0382 - Enable PCH ISH UART1 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshUart1GpioAssign; + +/** Offset 0x0383 - Enable PCH ISH I2C0 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshI2c0GpioAssign; + +/** Offset 0x0384 - Enable PCH ISH I2C1 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshI2c1GpioAssign; + +/** Offset 0x0385 - Enable PCH ISH I2C2 GPIO pins assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshI2c2GpioAssign; + +/** Offset 0x0386 - Enable PCH ISH GP_0 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp0GpioAssign; + +/** Offset 0x0387 - Enable PCH ISH GP_1 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp1GpioAssign; + +/** Offset 0x0388 - Enable PCH ISH GP_2 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp2GpioAssign; + +/** Offset 0x0389 - Enable PCH ISH GP_3 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp3GpioAssign; + +/** Offset 0x038A - Enable PCH ISH GP_4 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp4GpioAssign; + +/** Offset 0x038B - Enable PCH ISH GP_5 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp5GpioAssign; + +/** Offset 0x038C - Enable PCH ISH GP_6 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp6GpioAssign; + +/** Offset 0x038D - Enable PCH ISH GP_7 GPIO pin assigned + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIshGp7GpioAssign; + +/** Offset 0x038E - PCH ISH PDT Unlock Msg + 0: False; 1: True. + $EN_DIS +**/ + UINT8 PchIshPdtUnlock; + +/** Offset 0x038F - Enable PCH Lan LTR capabilty of PCH internal LAN + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchLanLtrEnable; + +/** Offset 0x0390 +**/ + UINT8 UnusedUpdSpace14[3]; + +/** Offset 0x0393 - Enable LOCKDOWN BIOS LOCK + Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region + protection. + $EN_DIS +**/ + UINT8 PchLockDownBiosLock; + +/** Offset 0x0394 - PCH Compatibility Revision ID + This member describes whether or not the CRID feature of PCH should be enabled. + $EN_DIS +**/ + UINT8 PchCrid; + +/** Offset 0x0395 - RTC CMOS MEMORY LOCK + Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper + and and lower 128-byte bank of RTC RAM. + $EN_DIS +**/ + UINT8 PchLockDownRtcMemoryLock; + +/** Offset 0x0396 - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 PcieRpHotPlug[24]; + +/** Offset 0x03AE - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 PcieRpPmSci[24]; + +/** Offset 0x03C6 - Enable PCIE RP Ext Sync + Indicate whether the extended synch is enabled. +**/ + UINT8 PcieRpExtSync[24]; + +/** Offset 0x03DE - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 PcieRpTransmitterHalfSwing[24]; + +/** Offset 0x03F6 - Enable PCIE RP Clk Req Detect + Probe CLKREQ# signal before enabling CLKREQ# based power management. +**/ + UINT8 PcieRpClkReqDetect[24]; + +/** Offset 0x040E - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 PcieRpAdvancedErrorReporting[24]; + +/** Offset 0x0426 - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 PcieRpUnsupportedRequestReport[24]; + +/** Offset 0x043E - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 PcieRpFatalErrorReport[24]; + +/** Offset 0x0456 - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 PcieRpNoFatalErrorReport[24]; + +/** Offset 0x046E - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 PcieRpCorrectableErrorReport[24]; + +/** Offset 0x0486 - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnFatalError[24]; + +/** Offset 0x049E - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnNonFatalError[24]; + +/** Offset 0x04B6 - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnCorrectableError[24]; + +/** Offset 0x04CE - PCIE RP Max Payload + Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. +**/ + UINT8 PcieRpMaxPayload[24]; + +/** Offset 0x04E6 - PCIE RP Device Reset Pad Active High + Indicated whether PERST# is active 0: Low; 1: High, See: DeviceResetPad. +**/ + UINT8 PcieRpDeviceResetPadActiveHigh[24]; + +/** Offset 0x04FE - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: + PCH_PCIE_SPEED). +**/ + UINT8 PcieRpPcieSpeed[24]; + +/** Offset 0x0516 - PCIE RP Gen3 Equalization Phase Method + PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: Default; 2: Software Search; + 4: Fixed Coeficients. +**/ + UINT8 PcieRpGen3EqPh3Method[24]; + +/** Offset 0x052E - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 PcieRpPhysicalSlotNumber[24]; + +/** Offset 0x0546 - PCIE RP Completion Timeout + The root port completion timeout(see: PCH_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default. +**/ + UINT8 PcieRpCompletionTimeout[24]; + +/** Offset 0x055E - PCIE RP Device Reset Pad + The PCH pin assigned to device PERST# signal if available, zero otherwise. See + also DeviceResetPadActiveHigh. +**/ + UINT32 PcieRpDeviceResetPad[24]; + +/** Offset 0x05BE +**/ + UINT8 UnusedUpdSpace15[10]; + +/** Offset 0x05C8 - PCIE RP Aspm + The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is + PchPcieAspmAutoConfig. +**/ + UINT8 PcieRpAspm[24]; + +/** Offset 0x05E0 - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). + Default is PchPcieL1SubstatesL1_1_2. +**/ + UINT8 PcieRpL1Substates[24]; + +/** Offset 0x05F8 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 PcieRpLtrEnable[24]; + +/** Offset 0x0610 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 PcieRpLtrConfigLock[24]; + +/** Offset 0x0628 - PCIE Eq Ph3 Lane Param Cm + PCH_PCIE_EQ_LANE_PARAM. Coefficient C-1. +**/ + UINT8 PcieEqPh3LaneParamCm[24]; + +/** Offset 0x0640 - PCIE Eq Ph3 Lane Param Cp + PCH_PCIE_EQ_LANE_PARAM. Coefficient C+1. +**/ + UINT8 PcieEqPh3LaneParamCp[24]; + +/** Offset 0x0658 - PCIE Sw Eq CoeffList Cm + PCH_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 PcieSwEqCoeffListCm[5]; + +/** Offset 0x065D - PCIE Sw Eq CoeffList Cp + PCH_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 PcieSwEqCoeffListCp[5]; + +/** Offset 0x0662 - PCIE Disable RootPort Clock Gating + Describes whether the PCI Express Clock Gating for each root port is enabled by + platform modules. 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PcieDisableRootPortClockGating; + +/** Offset 0x0663 - PCIE Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 PcieEnablePeerMemoryWrite; + +/** Offset 0x0664 +**/ + UINT8 UnusedUpdSpace16; + +/** Offset 0x0665 - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 PcieComplianceTestMode; + +/** Offset 0x0666 - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 PcieRpFunctionSwap; + +/** Offset 0x0667 +**/ + UINT8 UnusedUpdSpace17[2]; + +/** Offset 0x0669 - PCH Pm PME_B0_S5_DIS + When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. + $EN_DIS +**/ + UINT8 PchPmPmeB0S5Dis; + +/** Offset 0x066A - SPI ChipSelect signal polarity + Selects SPI ChipSelect signal polarity. +**/ + UINT8 SerialIoSpiCsPolarity[3]; + +/** Offset 0x066D - PCIE IMR + Enables Isolated Memory Region for PCIe. + $EN_DIS +**/ + UINT8 PcieRpImrEnabled; + +/** Offset 0x066E - PCIE IMR port number + Selects PCIE root port number for IMR feature. +**/ + UINT8 PcieRpImrSelection; + +/** Offset 0x066F +**/ + UINT8 UnusedUpdSpace18; + +/** Offset 0x0670 - PCH Pm Wol Enable Override + Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. + $EN_DIS +**/ + UINT8 PchPmWolEnableOverride; + +/** Offset 0x0671 - PCH Pm Pcie Wake From DeepSx + Determine if enable PCIe to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmPcieWakeFromDeepSx; + +/** Offset 0x0672 - PCH Pm WoW lan Enable + Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanEnable; + +/** Offset 0x0673 - PCH Pm WoW lan DeepSx Enable + Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the + PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanDeepSxEnable; + +/** Offset 0x0674 - PCH Pm Lan Wake From DeepSx + Determine if enable LAN to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmLanWakeFromDeepSx; + +/** Offset 0x0675 - PCH Pm Deep Sx Pol + Deep Sx Policy. + $EN_DIS +**/ + UINT8 PchPmDeepSxPol; + +/** Offset 0x0676 - PCH Pm Slp S3 Min Assert + SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. +**/ + UINT8 PchPmSlpS3MinAssert; + +/** Offset 0x0677 - PCH Pm Slp S4 Min Assert + SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. +**/ + UINT8 PchPmSlpS4MinAssert; + +/** Offset 0x0678 - PCH Pm Slp Sus Min Assert + SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. +**/ + UINT8 PchPmSlpSusMinAssert; + +/** Offset 0x0679 - PCH Pm Slp A Min Assert + SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. +**/ + UINT8 PchPmSlpAMinAssert; + +/** Offset 0x067A - SLP_S0# Override + Select 'Auto', it will be auto-configured according to probe type. Select 'Enabled' + will disable SLP_S0# assertion whereas 'Disabled' will enable SLP_S0# assertion + when debug is enabled. \n + Note: This BIOS option should keep 'Auto', other options are intended for advanced + configuration only. + 0:Disabled, 1:Enabled, 2:Auto +**/ + UINT8 SlpS0Override; + +/** Offset 0x067B - S0ix Override Settings + Select 'Auto', it will be auto-configured according to probe type. 'No Change' will + keep PMC default settings. Or select the desired debug probe type for S0ix Override + settings.\n + Reminder: DCI OOB (aka BSSB) uses CCA probe.\n + Note: This BIOS option should keep 'Auto', other options are intended for advanced + configuration only. + 0:No Change, 1:DCI OOB, 2:USB2 DbC, 3:Auto +**/ + UINT8 SlpS0DisQForDebug; + +/** Offset 0x067C - USB Overcurrent Override for DbC + This option overrides USB Over Current enablement state that USB OC will be disabled + after enabling this option. Enable when DbC is used to avoid signaling conflicts. + $EN_DIS +**/ + UINT8 PchEnableDbcObs; + +/** Offset 0x067D +**/ + UINT8 UnusedUpdSpace19[3]; + +/** Offset 0x0680 - PCH Pm Lpc Clock Run + This member describes whether or not the LPC ClockRun feature of PCH should be enabled. + $EN_DIS +**/ + UINT8 PchPmLpcClockRun; + +/** Offset 0x0681 - PCH Pm Slp Strch Sus Up + Enable SLP_X Stretching After SUS Well Power Up. + $EN_DIS +**/ + UINT8 PchPmSlpStrchSusUp; + +/** Offset 0x0682 - PCH Pm Slp Lan Low Dc + Enable/Disable SLP_LAN# Low on DC Power. + $EN_DIS +**/ + UINT8 PchPmSlpLanLowDc; + +/** Offset 0x0683 - PCH Pm Pwr Btn Override Period + PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. +**/ + UINT8 PchPmPwrBtnOverridePeriod; + +/** Offset 0x0684 - PCH Pm Disable Dsx Ac Present Pulldown + When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. + $EN_DIS +**/ + UINT8 PchPmDisableDsxAcPresentPulldown; + +/** Offset 0x0685 +**/ + UINT8 UnusedUpdSpace20; + +/** Offset 0x0686 - PCH Pm Disable Native Power Button + Power button native mode disable. + $EN_DIS +**/ + UINT8 PchPmDisableNativePowerButton; + +/** Offset 0x0687 - PCH Pm Slp S0 Enable + Indicates whether SLP_S0# is to be asserted when PCH reaches idle state. + $EN_DIS +**/ + UINT8 PchPmSlpS0Enable; + +/** Offset 0x0688 - PCH Pm ME_WAKE_STS + Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmMeWakeSts; + +/** Offset 0x0689 - PCH Pm WOL_OVR_WK_STS + Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmWolOvrWkSts; + +/** Offset 0x068A - PCH Pm Reset Power Cycle Duration + Could be customized in the unit of second. Please refer to EDS for all support settings. + 0 is default, 1 is 1 second, 2 is 2 seconds, ... +**/ + UINT8 PchPmPwrCycDur; + +/** Offset 0x068B - PCH Pm Pcie Pll Ssc + Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No + BIOS override. +**/ + UINT8 PchPmPciePllSsc; + +/** Offset 0x068C +**/ + UINT8 UnusedUpdSpace21; + +/** Offset 0x068D - PCH Sata Pwr Opt Enable + SATA Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 SataPwrOptEnable; + +/** Offset 0x068E - PCH Sata eSATA Speed Limit + When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. + $EN_DIS +**/ + UINT8 EsataSpeedLimit; + +/** Offset 0x068F - PCH Sata Speed Limit + Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. +**/ + UINT8 SataSpeedLimit; + +/** Offset 0x0690 - Enable SATA Port HotPlug + Enable SATA Port HotPlug. +**/ + UINT8 SataPortsHotPlug[8]; + +/** Offset 0x0698 - Enable SATA Port Interlock Sw + Enable SATA Port Interlock Sw. +**/ + UINT8 SataPortsInterlockSw[8]; + +/** Offset 0x06A0 - Enable SATA Port External + Enable SATA Port External. +**/ + UINT8 SataPortsExternal[8]; + +/** Offset 0x06A8 - Enable SATA Port SpinUp + Enable the COMRESET initialization Sequence to the device. +**/ + UINT8 SataPortsSpinUp[8]; + +/** Offset 0x06B0 - Enable SATA Port Solid State Drive + 0: HDD; 1: SSD. +**/ + UINT8 SataPortsSolidStateDrive[8]; + +/** Offset 0x06B8 - Enable SATA Port Enable Dito Config + Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). +**/ + UINT8 SataPortsEnableDitoConfig[8]; + +/** Offset 0x06C0 - Enable SATA Port DmVal + DITO multiplier. Default is 15. +**/ + UINT8 SataPortsDmVal[8]; + +/** Offset 0x06C8 - Enable SATA Port DmVal + DEVSLP Idle Timeout (DITO), Default is 625. +**/ + UINT16 SataPortsDitoVal[8]; + +/** Offset 0x06D8 - Enable SATA Port ZpOdd + Support zero power ODD. +**/ + UINT8 SataPortsZpOdd[8]; + +/** Offset 0x06E0 - PCH Sata Rst Raid Device Id + Enable RAID Alternate ID. + 0:Client, 1:Alternate, 2:Server +**/ + UINT8 SataRstRaidDeviceId; + +/** Offset 0x06E1 - PCH Sata Rst Raid0 + RAID0. + $EN_DIS +**/ + UINT8 SataRstRaid0; + +/** Offset 0x06E2 - PCH Sata Rst Raid1 + RAID1. + $EN_DIS +**/ + UINT8 SataRstRaid1; + +/** Offset 0x06E3 - PCH Sata Rst Raid10 + RAID10. + $EN_DIS +**/ + UINT8 SataRstRaid10; + +/** Offset 0x06E4 - PCH Sata Rst Raid5 + RAID5. + $EN_DIS +**/ + UINT8 SataRstRaid5; + +/** Offset 0x06E5 - PCH Sata Rst Irrt + Intel Rapid Recovery Technology. + $EN_DIS +**/ + UINT8 SataRstIrrt; + +/** Offset 0x06E6 - PCH Sata Rst Orom Ui Banner + OROM UI and BANNER. + $EN_DIS +**/ + UINT8 SataRstOromUiBanner; + +/** Offset 0x06E7 - PCH Sata Rst Orom Ui Delay + 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). +**/ + UINT8 SataRstOromUiDelay; + +/** Offset 0x06E8 - PCH Sata Rst Hdd Unlock + Indicates that the HDD password unlock in the OS is enabled. + $EN_DIS +**/ + UINT8 SataRstHddUnlock; + +/** Offset 0x06E9 - PCH Sata Rst Led Locate + Indicates that the LED/SGPIO hardware is attached and ping to locate feature is + enabled on the OS. + $EN_DIS +**/ + UINT8 SataRstLedLocate; + +/** Offset 0x06EA - PCH Sata Rst Irrt Only + Allow only IRRT drives to span internal and external ports. + $EN_DIS +**/ + UINT8 SataRstIrrtOnly; + +/** Offset 0x06EB - PCH Sata Rst Smart Storage + RST Smart Storage caching Bit. + $EN_DIS +**/ + UINT8 SataRstSmartStorage; + +/** Offset 0x06EC - PCH Sata Rst Pcie Storage Remap enable + Enable Intel RST for PCIe Storage remapping. +**/ + UINT8 SataRstPcieEnable[3]; + +/** Offset 0x06EF - PCH Sata Rst Pcie Storage Port + Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). +**/ + UINT8 SataRstPcieStoragePort[3]; + +/** Offset 0x06F2 - PCH Sata Rst Pcie Device Reset Delay + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms +**/ + UINT8 SataRstPcieDeviceResetDelay[3]; + +/** Offset 0x06F5 - Enable eMMC HS400 Training + Determine if HS400 Training is required. + $EN_DIS +**/ + UINT8 PchScsEmmcHs400TuningRequired; + +/** Offset 0x06F6 - Set HS400 Tuning Data Valid + Set if HS400 Tuning Data Valid. + $EN_DIS +**/ + UINT8 PchScsEmmcHs400DllDataValid; + +/** Offset 0x06F7 - Rx Strobe Delay Control + Rx Strobe Delay Control - Rx Strobe Delay DLL 1 (HS400 Mode). +**/ + UINT8 PchScsEmmcHs400RxStrobeDll1; + +/** Offset 0x06F8 - Tx Data Delay Control + Tx Data Delay Control 1 - Tx Data Delay (HS400 Mode). +**/ + UINT8 PchScsEmmcHs400TxDataDll; + +/** Offset 0x06F9 - I/O Driver Strength + I/O driver strength: 0 - 33 Ohm, 1 - 40 Ohm, 2 - 50 Ohm. + 0:33 Ohm, 1:40 Ohm, 2:50 Ohm +**/ + UINT8 PchScsEmmcHs400DriverStrength; + +/** Offset 0x06FA +**/ + UINT8 UnusedUpdSpace22[7]; + +/** Offset 0x0701 - PcdSerialIoUart0PinMuxing + Select SerialIo Uart0 pin muxing. Setting applicable only if SerialIO UART0 is enabled. + 0:default pins, 1:pins muxed with CNV_BRI/RGI +**/ + UINT8 SerialIoUart0PinMuxing; + +/** Offset 0x0702 +**/ + UINT8 UnusedUpdSpace23[1]; + +/** Offset 0x0703 - Enables UART hardware flow control, CTS and RTS lines + Enables UART hardware flow control, CTS and RTS linesh. +**/ + UINT8 SerialIoUartHwFlowCtrl[3]; + +/** Offset 0x0706 - UART Number For Debug Purpose + UART number for debug purpose. 0:UART0, 1: UART1, 2:UART2. Note: If UART0 is selected + as CNVi BT Core interface, it cannot be used for debug purpose. + 0:UART0, 1:UART1, 2:UART2 +**/ + UINT8 SerialIoDebugUartNumber; + +/** Offset 0x0707 - Enable Debug UART Controller + Enable debug UART controller after post. + $EN_DIS +**/ + UINT8 SerialIoEnableDebugUartAfterPost; + +/** Offset 0x0708 - Enable Serial IRQ + Determines if enable Serial IRQ. + $EN_DIS +**/ + UINT8 PchSirqEnable; + +/** Offset 0x0709 - Serial IRQ Mode Select + Serial IRQ Mode Select, 0: quiet mode, 1: continuous mode. + $EN_DIS +**/ + UINT8 PchSirqMode; + +/** Offset 0x070A - Start Frame Pulse Width + Start Frame Pulse Width, 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk. + 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk +**/ + UINT8 PchStartFramePulse; + +/** Offset 0x070B - Reserved + Reserved + $EN_DIS +**/ + UINT8 ReservedForFuture1; + +/** Offset 0x070C - Thermal Device SMI Enable + This locks down SMI Enable on Alert Thermal Sensor Trip. + $EN_DIS +**/ + UINT8 PchTsmicLock; + +/** Offset 0x070D - Thermal Throttling Custimized T0Level Value + Custimized T0Level value. +**/ + UINT16 PchT0Level; + +/** Offset 0x070F - Thermal Throttling Custimized T1Level Value + Custimized T1Level value. +**/ + UINT16 PchT1Level; + +/** Offset 0x0711 - Thermal Throttling Custimized T2Level Value + Custimized T2Level value. +**/ + UINT16 PchT2Level; + +/** Offset 0x0713 - Enable The Thermal Throttle + Enable the thermal throttle function. + $EN_DIS +**/ + UINT8 PchTTEnable; + +/** Offset 0x0714 - PMSync State 13 + When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force + at least T2 state. + $EN_DIS +**/ + UINT8 PchTTState13Enable; + +/** Offset 0x0715 - Thermal Throttle Lock + Thermal Throttle Lock. + $EN_DIS +**/ + UINT8 PchTTLock; + +/** Offset 0x0716 - Thermal Throttling Suggested Setting + Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 TTSuggestedSetting; + +/** Offset 0x0717 - Enable PCH Cross Throttling + Enable/Disable PCH Cross Throttling + $EN_DIS +**/ + UINT8 TTCrossThrottling; + +/** Offset 0x0718 - DMI Thermal Sensor Autonomous Width Enable + DMI Thermal Sensor Autonomous Width Enable. + $EN_DIS +**/ + UINT8 PchDmiTsawEn; + +/** Offset 0x0719 - DMI Thermal Sensor Suggested Setting + DMT thermal sensor suggested representative values. + $EN_DIS +**/ + UINT8 DmiSuggestedSetting; + +/** Offset 0x071A - Thermal Sensor 0 Target Width + DMT thermal sensor suggested representative values. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS0TW; + +/** Offset 0x071B - Thermal Sensor 1 Target Width + Thermal Sensor 1 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS1TW; + +/** Offset 0x071C - Thermal Sensor 2 Target Width + Thermal Sensor 2 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS2TW; + +/** Offset 0x071D - Thermal Sensor 3 Target Width + Thermal Sensor 3 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS3TW; + +/** Offset 0x071E - Port 0 T1 Multipler + Port 0 T1 Multipler. +**/ + UINT8 SataP0T1M; + +/** Offset 0x071F - Port 0 T2 Multipler + Port 0 T2 Multipler. +**/ + UINT8 SataP0T2M; + +/** Offset 0x0720 - Port 0 T3 Multipler + Port 0 T3 Multipler. +**/ + UINT8 SataP0T3M; + +/** Offset 0x0721 - Port 0 Tdispatch + Port 0 Tdispatch. +**/ + UINT8 SataP0TDisp; + +/** Offset 0x0722 - Port 1 T1 Multipler + Port 1 T1 Multipler. +**/ + UINT8 SataP1T1M; + +/** Offset 0x0723 - Port 1 T2 Multipler + Port 1 T2 Multipler. +**/ + UINT8 SataP1T2M; + +/** Offset 0x0724 - Port 1 T3 Multipler + Port 1 T3 Multipler. +**/ + UINT8 SataP1T3M; + +/** Offset 0x0725 - Port 1 Tdispatch + Port 1 Tdispatch. +**/ + UINT8 SataP1TDisp; + +/** Offset 0x0726 - Port 0 Tinactive + Port 0 Tinactive. +**/ + UINT8 SataP0Tinact; + +/** Offset 0x0727 - Port 0 Alternate Fast Init Tdispatch + Port 0 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP0TDispFinit; + +/** Offset 0x0728 - Port 1 Tinactive + Port 1 Tinactive. +**/ + UINT8 SataP1Tinact; + +/** Offset 0x0729 - Port 1 Alternate Fast Init Tdispatch + Port 1 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP1TDispFinit; + +/** Offset 0x072A - Sata Thermal Throttling Suggested Setting + Sata Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 SataThermalSuggestedSetting; + +/** Offset 0x072B - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. + $EN_DIS +**/ + UINT8 PchMemoryThrottlingEnable; + +/** Offset 0x072C - Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPmsyncEnable[2]; + +/** Offset 0x072E - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryC0TransmitEnable[2]; + +/** Offset 0x0730 - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPinSelection[2]; + +/** Offset 0x0732 - Thermal Device Temperature + Decides the temperature. +**/ + UINT16 PchTemperatureHotLevel; + +/** Offset 0x0734 - Enable xHCI Compliance Mode + Compliance Mode can be enabled for testing through this option but this is disabled + by default. + $EN_DIS +**/ + UINT8 PchEnableComplianceMode; + +/** Offset 0x0735 - USB2 Port Over Current Pin + Describe the specific over current pin number of USB 2.0 Port N. +**/ + UINT8 Usb2OverCurrentPin[16]; + +/** Offset 0x0745 - USB3 Port Over Current Pin + Describe the specific over current pin number of USB 3.0 Port N. +**/ + UINT8 Usb3OverCurrentPin[10]; + +/** Offset 0x074F - Enable 8254 Static Clock Gating + Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time + might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support + boot legacy OS using 8254 timer. Also enable this while S0ix is enabled. + $EN_DIS +**/ + UINT8 Enable8254ClockGating; + +/** Offset 0x0750 - PCH Sata Rst Optane Memory + Optane Memory + $EN_DIS +**/ + UINT8 SataRstOptaneMemory; + +/** Offset 0x0751 +**/ + UINT8 UnusedUpdSpace24[3]; + +/** Offset 0x0754 - Pch PCIE device override table pointer + The PCIe device table is being used to override PCIe device ASPM settings. This + is a pointer points to a 32bit address. And it's only used in PostMem phase. Please + refer to PCH_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId + must be 0. +**/ + UINT32 PchPcieDeviceOverrideTablePtr; + +/** Offset 0x0758 - Enable TCO timer. + When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have + huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer + emulation must be enabled, and WDAT table must not be exposed to the OS. + $EN_DIS +**/ + UINT8 EnableTcoTimer; + +/** Offset 0x0759 - BgpdtHash[4] + BgpdtHash values +**/ + UINT64 BgpdtHash[4]; + +/** Offset 0x0779 - BiosGuardAttr + BiosGuardAttr default values +**/ + UINT32 BiosGuardAttr; + +/** Offset 0x077D - BiosGuardModulePtr + BiosGuardModulePtr default values +**/ + UINT64 BiosGuardModulePtr; + +/** Offset 0x0785 - SendEcCmd + SendEcCmd function pointer. \n + @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE + EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode +**/ + UINT64 SendEcCmd; + +/** Offset 0x078D - EcCmdProvisionEav + Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC +**/ + UINT8 EcCmdProvisionEav; + +/** Offset 0x078E - EcCmdLock + EcCmdLock default values. Locks Ephemeral Authorization Value sent previously +**/ + UINT8 EcCmdLock; + +/** Offset 0x078F - SgxEpoch0 + SgxEpoch0 default values +**/ + UINT64 SgxEpoch0; + +/** Offset 0x0797 - SgxEpoch1 + SgxEpoch1 default values +**/ + UINT64 SgxEpoch1; + +/** Offset 0x079F - SgxSinitNvsData + SgxSinitNvsData default values +**/ + UINT8 SgxSinitNvsData; + +/** Offset 0x07A0 - Si Config CSM Flag. + Platform specific common policies that used by several silicon components. CSM status flag. + $EN_DIS +**/ + UINT8 SiCsmFlag; + +/** Offset 0x07A1 +**/ + UINT32 SiSsidTablePtr; + +/** Offset 0x07A5 +**/ + UINT16 SiNumberOfSsidTableEntry; + +/** Offset 0x07A7 - SATA RST Interrupt Mode + Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. + 0:Msix, 1:Msi, 2:Legacy +**/ + UINT8 SataRstInterrupt; + +/** Offset 0x07A8 - ME Unconfig on RTC clear + 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>. + 2: Cmos is clear, status unkonwn. 3: Reserved + 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos + is clear, 3: Reserved +**/ + UINT8 MeUnconfigOnRtcClear; + +/** Offset 0x07A9 - Enable PS_ON. + When FALSE, PS_ON is to be disabled. + $EN_DIS +**/ + UINT8 PsOnEnable; + +/** Offset 0x07AA +**/ + UINT8 ReservedFspsUpd[3]; +} FSP_S_CONFIG; + +/** Fsp S Test Configuration +**/ +typedef struct { + +/** Offset 0x07AD +**/ + UINT32 Signature; + +/** Offset 0x07B1 - Enable/Disable Device 7 + Enable: Device 7 enabled, Disable (Default): Device 7 disabled + $EN_DIS +**/ + UINT8 ChapDeviceEnable; + +/** Offset 0x07B2 - Skip PAM regsiter lock + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + $EN_DIS +**/ + UINT8 SkipPamLock; + +/** Offset 0x07B3 - EDRAM Test Mode + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode +**/ + UINT8 EdramTestMode; + +/** Offset 0x07B4 - DMI Extended Sync Control + Enable: Enable DMI Extended Sync Control, Disable(Default): Disable DMI Extended + Sync Control + $EN_DIS +**/ + UINT8 DmiExtSync; + +/** Offset 0x07B5 - DMI IOT Control + Enable: Enable DMI IOT Control, Disable(Default): Disable DMI IOT Control + $EN_DIS +**/ + UINT8 DmiIot; + +/** Offset 0x07B6 - PEG Max Payload size per root port + 0xFF(Default):Auto, 0x1: Force 128B, 0x2: Force 256B + 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B +**/ + UINT8 PegMaxPayload[4]; + +/** Offset 0x07BA - Enable/Disable IGFX RenderStandby + Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby + $EN_DIS +**/ + UINT8 RenderStandby; + +/** Offset 0x07BB - Enable/Disable IGFX PmSupport + Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport + $EN_DIS +**/ + UINT8 PmSupport; + +/** Offset 0x07BC - Enable/Disable CdynmaxClamp + Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp + $EN_DIS +**/ + UINT8 CdynmaxClampEnable; + +/** Offset 0x07BD - Disable VT-d + 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) + $EN_DIS +**/ + UINT8 VtdDisable; + +/** Offset 0x07BE - GT Frequency Limit + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz +**/ + UINT8 GtFreqMax; + +/** Offset 0x07BF - Disable Turbo GT + 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency + $EN_DIS +**/ + UINT8 DisableTurboGt; + +/** Offset 0x07C0 - SaPostMemTestRsvd + Reserved for SA Post-Mem Test + $EN_DIS +**/ + UINT8 SaPostMemTestRsvd[11]; + +/** Offset 0x07CB - 1-Core Ratio Limit + 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal + to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit, 5-Core Ratio Limit, + 6-Core Ratio Limit, 7-Core Ratio Limit, 8-Core Ratio Limit. Range is 0 to 83 +**/ + UINT8 OneCoreRatioLimit; + +/** Offset 0x07CC - 2-Core Ratio Limit + 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 TwoCoreRatioLimit; + +/** Offset 0x07CD - 3-Core Ratio Limit + 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 ThreeCoreRatioLimit; + +/** Offset 0x07CE - 4-Core Ratio Limit + 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 FourCoreRatioLimit; + +/** Offset 0x07CF - Enable or Disable HWP + Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b> + 2-3:Reserved + $EN_DIS +**/ + UINT8 Hwp; + +/** Offset 0x07D0 - Hardware Duty Cycle Control + Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved + $EN_DIS +**/ + UINT8 HdcControl; + +/** Offset 0x07D1 - Package Long duration turbo mode time + Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds) + 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PowerLimit1Time; + +/** Offset 0x07D2 - Short Duration Turbo Mode + Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PowerLimit2; + +/** Offset 0x07D3 - Turbo settings Lock + Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable + $EN_DIS +**/ + UINT8 TurboPowerLimitLock; + +/** Offset 0x07D4 - Package PL3 time window + Package PL3 time window range for this policy from 0 to 64ms +**/ + UINT8 PowerLimit3Time; + +/** Offset 0x07D5 - Package PL3 Duty Cycle + Package PL3 Duty Cycle; Valid Range is 0 to 100 +**/ + UINT8 PowerLimit3DutyCycle; + +/** Offset 0x07D6 - Package PL3 Lock + Package PL3 Lock Enable/Disable; <b>0: Disable ; <b> 1: Enable + $EN_DIS +**/ + UINT8 PowerLimit3Lock; + +/** Offset 0x07D7 - Package PL4 Lock + Package PL4 Lock Enable/Disable; <b>0: Disable ; <b>1: Enable + $EN_DIS +**/ + UINT8 PowerLimit4Lock; + +/** Offset 0x07D8 - TCC Activation Offset + TCC Activation Offset. Offset from factory set TCC activation temperature at which + the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation + Temperature, in volts.For Y SKU, the recommended default for this policy is <b>10</b>, + For all other SKUs the recommended default are <b>0</b> +**/ + UINT8 TccActivationOffset; + +/** Offset 0x07D9 - Tcc Offset Clamp Enable/Disable + Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle + below P1.For Y SKU, the recommended default for this policy is <b>1: Enabled</b>, + For all other SKUs the recommended default are <b>0: Disabled</b>. + $EN_DIS +**/ + UINT8 TccOffsetClamp; + +/** Offset 0x07DA - Tcc Offset Lock + Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature + target; 0: Disabled; <b>1: Enabled </b>. + $EN_DIS +**/ + UINT8 TccOffsetLock; + +/** Offset 0x07DB - Custom Ratio State Entries + The number of custom ratio state entries, ranges from 0 to 40 for a valid custom + ratio table.Sets the number of custom P-states. At least 2 states must be present +**/ + UINT8 NumberOfEntries; + +/** Offset 0x07DC - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128 +**/ + UINT8 Custom1PowerLimit1Time; + +/** Offset 0x07DD - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 +**/ + UINT8 Custom1TurboActivationRatio; + +/** Offset 0x07DE - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom1ConfigTdpControl; + +/** Offset 0x07DF - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128 +**/ + UINT8 Custom2PowerLimit1Time; + +/** Offset 0x07E0 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 +**/ + UINT8 Custom2TurboActivationRatio; + +/** Offset 0x07E1 - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom2ConfigTdpControl; + +/** Offset 0x07E2 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128 +**/ + UINT8 Custom3PowerLimit1Time; + +/** Offset 0x07E3 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 +**/ + UINT8 Custom3TurboActivationRatio; + +/** Offset 0x07E4 - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom3ConfigTdpControl; + +/** Offset 0x07E5 - ConfigTdp mode settings Lock + Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 ConfigTdpLock; + +/** Offset 0x07E6 - Load Configurable TDP SSDT + Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ConfigTdpBios; + +/** Offset 0x07E7 - PL1 Enable value + PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit1; + +/** Offset 0x07E8 - PL1 timewindow + PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16 + , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PsysPowerLimit1Time; + +/** Offset 0x07E9 - PL2 Enable Value + PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>; + 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit2; + +/** Offset 0x07EA - Enable or Disable MLC Streamer Prefetcher + Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MlcStreamerPrefetcher; + +/** Offset 0x07EB - Enable or Disable MLC Spatial Prefetcher + Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 MlcSpatialPrefetcher; + +/** Offset 0x07EC - Enable or Disable Monitor /MWAIT instructions + Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MonitorMwaitEnable; + +/** Offset 0x07ED - Enable or Disable initialization of machine check registers + Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 MachineCheckEnable; + +/** Offset 0x07EE - Enable or Disable processor debug features + Enable or Disable processor debug features; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 DebugInterfaceEnable; + +/** Offset 0x07EF - Lock or Unlock debug interface features + Lock or Unlock debug interface features; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 DebugInterfaceLockEnable; + +/** Offset 0x07F0 - AP Idle Manner of waiting for SIPI + AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop. + 1: HALT loop, 2: MWAIT loop, 3: RUN loop +**/ + UINT8 ApIdleManner; + +/** Offset 0x07F1 - Control on Processor Trace output scheme + Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output. + 0: Single Range Output, 1: ToPA Output +**/ + UINT8 ProcessorTraceOutputScheme; + +/** Offset 0x07F2 - Enable or Disable Processor Trace feature + Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ProcessorTraceEnable; + +/** Offset 0x07F3 - Base of memory region allocated for Processor Trace + Base address of memory region allocated for Processor Trace. Processor Trace requires + 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> +**/ + UINT64 ProcessorTraceMemBase; + +/** Offset 0x07FB - Memory region allocation for Processor Trace + Length in bytes of memory region allocated for Processor Trace. Processor Trace + requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b> +**/ + UINT32 ProcessorTraceMemLength; + +/** Offset 0x07FF - Enable or Disable Voltage Optimization feature + Enable or Disable Voltage Optimization feature 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 VoltageOptimization; + +/** Offset 0x0800 - Enable or Disable Intel SpeedStep Technology + Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 Eist; + +/** Offset 0x0801 - Enable or Disable Energy Efficient P-state + Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; + <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnergyEfficientPState; + +/** Offset 0x0802 - Enable or Disable Energy Efficient Turbo + Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; + <b>1: Enable</b> + $EN_DIS +**/ + UINT8 EnergyEfficientTurbo; + +/** Offset 0x0803 - Enable or Disable T states + Enable or Disable T states; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 TStates; + +/** Offset 0x0804 - Enable or Disable Bi-Directional PROCHOT# + Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 BiProcHot; + +/** Offset 0x0805 - Enable or Disable PROCHOT# signal being driven externally + Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 DisableProcHotOut; + +/** Offset 0x0806 - Enable or Disable PROCHOT# Response + Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 ProcHotResponse; + +/** Offset 0x0807 - Enable or Disable VR Thermal Alert + Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 DisableVrThermalAlert; + +/** Offset 0x0808 - Enable or Disable Thermal Reporting + Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 AutoThermalReporting; + +/** Offset 0x0809 - Enable or Disable Thermal Monitor + Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 ThermalMonitor; + +/** Offset 0x080A - Enable or Disable CPU power states (C-states) + Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 Cx; + +/** Offset 0x080B - Configure C-State Configuration Lock + Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>. + $EN_DIS +**/ + UINT8 PmgCstCfgCtrlLock; + +/** Offset 0x080C - Enable or Disable Enhanced C-states + Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1e; + +/** Offset 0x080D - Enable or Disable Package Cstate Demotion + Enable or Disable Package Cstate Demotion. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PkgCStateDemotion; + +/** Offset 0x080E - Enable or Disable Package Cstate UnDemotion + Enable or Disable Package Cstate UnDemotion. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 PkgCStateUnDemotion; + +/** Offset 0x080F - Enable or Disable CState-Pre wake + Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 CStatePreWake; + +/** Offset 0x0810 - Enable or Disable TimedMwait Support. + Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 TimedMwait; + +/** Offset 0x0811 - Enable or Disable IO to MWAIT redirection + Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 CstCfgCtrIoMwaitRedirection; + +/** Offset 0x0812 - Set the Max Pkg Cstate + Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep + C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , + 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto +**/ + UINT8 PkgCStateLimit; + +/** Offset 0x0813 - TimeUnit for C-State Latency Control0 + TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl0TimeUnit; + +/** Offset 0x0814 - TimeUnit for C-State Latency Control1 + TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl1TimeUnit; + +/** Offset 0x0815 - TimeUnit for C-State Latency Control2 + TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl2TimeUnit; + +/** Offset 0x0816 - TimeUnit for C-State Latency Control3 + TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl3TimeUnit; + +/** Offset 0x0817 - TimeUnit for C-State Latency Control4 + Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl4TimeUnit; + +/** Offset 0x0818 - TimeUnit for C-State Latency Control5 + TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl5TimeUnit; + +/** Offset 0x0819 - Interrupt Redirection Mode Select + Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7: + No change. +**/ + UINT8 PpmIrmSetting; + +/** Offset 0x081A - Lock prochot configuration + Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable + $EN_DIS +**/ + UINT8 ProcHotLock; + +/** Offset 0x081B - Configuration for boot TDP selection + Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP + Up;0xFF : Deactivate +**/ + UINT8 ConfigTdpLevel; + +/** Offset 0x081C - Race To Halt + Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency + in order to enter pkg C-State faster to reduce overall power. (RTH is controlled + through MSR 1FC bit 20)Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 RaceToHalt; + +/** Offset 0x081D - Max P-State Ratio + Max P-State Ratio, Valid Range 0 to 0x7F +**/ + UINT8 MaxRatio; + +/** Offset 0x081E - P-state ratios for custom P-state table + P-state ratios for custom P-state table. NumberOfEntries has valid range between + 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] + are configurable. Valid Range of each entry is 0 to 0x7F +**/ + UINT8 StateRatio[40]; + +/** Offset 0x0846 - P-state ratios for max 16 version of custom P-state table + P-state ratios for max 16 version of custom P-state table. This table is used for + OS versions limited to a max of 16 P-States. If the first entry of this table is + 0, or if Number of Entries is 16 or less, then this table will be ignored, and + up to the top 16 values of the StateRatio table will be used instead. Valid Range + of each entry is 0 to 0x7F +**/ + UINT8 StateRatioMax16[16]; + +/** Offset 0x0856 - Platform Power Pmax + PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments. + Range 0-1024 Watts. Value of 800 = 100W +**/ + UINT16 PsysPmax; + +/** Offset 0x0858 - Interrupt Response Time Limit of C-State LatencyContol0 + Interrupt Response Time Limit of C-State LatencyContol0. Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl0Irtl; + +/** Offset 0x085A - Interrupt Response Time Limit of C-State LatencyContol1 + Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl1Irtl; + +/** Offset 0x085C - Interrupt Response Time Limit of C-State LatencyContol2 + Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl2Irtl; + +/** Offset 0x085E - Interrupt Response Time Limit of C-State LatencyContol3 + Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl3Irtl; + +/** Offset 0x0860 - Interrupt Response Time Limit of C-State LatencyContol4 + Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl4Irtl; + +/** Offset 0x0862 - Interrupt Response Time Limit of C-State LatencyContol5 + Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF +**/ + UINT16 CstateLatencyControl5Irtl; + +/** Offset 0x0864 - Package Long duration turbo mode power limit + Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit1; + +/** Offset 0x0868 - Package Short duration turbo mode power limit + Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit2Power; + +/** Offset 0x086C - Package PL3 power limit + Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit3; + +/** Offset 0x0870 - Package PL4 power limit + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit4; + +/** Offset 0x0874 - Tcc Offset Time Window for RATL + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 TccOffsetTimeWindowForRatl; + +/** Offset 0x0878 - Short term Power Limit value for custom cTDP level 1 + Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit1; + +/** Offset 0x087C - Long term Power Limit value for custom cTDP level 1 + Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit2; + +/** Offset 0x0880 - Short term Power Limit value for custom cTDP level 2 + Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit1; + +/** Offset 0x0884 - Long term Power Limit value for custom cTDP level 2 + Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit2; + +/** Offset 0x0888 - Short term Power Limit value for custom cTDP level 3 + Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit1; + +/** Offset 0x088C - Long term Power Limit value for custom cTDP level 3 + Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit2; + +/** Offset 0x0890 - Platform PL1 power + Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit1Power; + +/** Offset 0x0894 - Platform PL2 power + Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit2Power; + +/** Offset 0x0898 - Set Three Strike Counter Disable + False (default): Three Strike counter will be incremented and True: Prevents Three + Strike counter from incrementing; <b>0: False</b>; 1: True. + 0: False, 1: True +**/ + UINT8 ThreeStrikeCounterDisable; + +/** Offset 0x0899 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT + Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable. + $EN_DIS +**/ + UINT8 HwpInterruptControl; + +/** Offset 0x089A - 5-Core Ratio Limit + 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 FiveCoreRatioLimit; + +/** Offset 0x089B - 6-Core Ratio Limit + 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SixCoreRatioLimit; + +/** Offset 0x089C - 7-Core Ratio Limit + 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SevenCoreRatioLimit; + +/** Offset 0x089D - 8-Core Ratio Limit + 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 EightCoreRatioLimit; + +/** Offset 0x089E - Intel Turbo Boost Max Technology 3.0 + Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b> + $EN_DIS +**/ + UINT8 EnableItbm; + +/** Offset 0x089F - Intel Turbo Boost Max Technology 3.0 Driver + Intel Turbo Boost Max Technology 3.0 Driver <b>0: Disabled</b>; 1: Enabled + $EN_DIS +**/ + UINT8 EnableItbmDriver; + +/** Offset 0x08A0 - Enable or Disable C1 Cstate Demotion + Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1StateAutoDemotion; + +/** Offset 0x08A1 - Enable or Disable C1 Cstate UnDemotion + Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b> + $EN_DIS +**/ + UINT8 C1StateUnDemotion; + +/** Offset 0x08A2 - ReservedCpuPostMemTest + Reserved for CPU Post-Mem Test + $EN_DIS +**/ + UINT8 ReservedCpuPostMemTest[24]; + +/** Offset 0x08BA - SgxSinitDataFromTpm + SgxSinitDataFromTpm default values +**/ + UINT8 SgxSinitDataFromTpm; + +/** Offset 0x08BB - End of Post message + Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): + EOP send in PEI, Send in DXE(0x2)(Default): EOP send in PEI + 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x08BC - D0I3 Setting for HECI Disable + Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all + HECI devices + $EN_DIS +**/ + UINT8 DisableD0I3SettingForHeci; + +/** Offset 0x08BD - HD Audio Reset Wait Timer + The delay timer after Azalia reset, the value is number of microseconds. Default is 600. +**/ + UINT16 PchHdaResetWaitTimer; + +/** Offset 0x08BF - Enable LOCKDOWN SMI + Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. + $EN_DIS +**/ + UINT8 PchLockDownGlobalSmi; + +/** Offset 0x08C0 - Enable LOCKDOWN BIOS Interface + Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. + $EN_DIS +**/ + UINT8 PchLockDownBiosInterface; + +/** Offset 0x08C1 - Unlock all GPIO pads + Force all GPIO pads to be unlocked for debug purpose. + $EN_DIS +**/ + UINT8 PchUnlockGpioPads; + +/** Offset 0x08C2 - PCH Unlock SBI access + This unlock the SBI lock bit to allow SBI after post time. 0: Lock SBI access; 1: + Unlock SBI access. + $EN_DIS +**/ + UINT8 PchSbiUnlock; + +/** Offset 0x08C3 - PCH Unlock SideBand access + The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before + 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. + $EN_DIS +**/ + UINT8 PchSbAccessUnlock; + +/** Offset 0x08C4 - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 PcieRpLtrMaxSnoopLatency[24]; + +/** Offset 0x08F4 - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 PcieRpLtrMaxNoSnoopLatency[24]; + +/** Offset 0x0924 - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 PcieRpSnoopLatencyOverrideMode[24]; + +/** Offset 0x093C - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x0954 - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 PcieRpSnoopLatencyOverrideValue[24]; + +/** Offset 0x0984 - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; + +/** Offset 0x099C - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x09B4 - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; + +/** Offset 0x09E4 - PCIE RP Slot Power Limit Scale + Specifies scale used for slot power limit value. Leave as 0 to set to default. +**/ + UINT8 PcieRpSlotPowerLimitScale[24]; + +/** Offset 0x09FC - PCIE RP Slot Power Limit Value + Specifies upper limit on power supplie by slot. Leave as 0 to set to default. +**/ + UINT16 PcieRpSlotPowerLimitValue[24]; + +/** Offset 0x0A2C - PCIE RP Upstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 5. +**/ + UINT8 PcieRpUptp[24]; + +/** Offset 0x0A44 - PCIE RP Downstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 7. +**/ + UINT8 PcieRpDptp[24]; + +/** Offset 0x0A5C - PCIE RP Enable Port8xh Decode + This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PcieEnablePort8xhDecode; + +/** Offset 0x0A5D - PCIE Port8xh Decode Port Index + The Index of PCIe Port that is selected for Port8xh Decode (0 Based). +**/ + UINT8 PchPciePort8xhDecodePortIndex; + +/** Offset 0x0A5E - PCH Energy Reporting + Disable/Enable PCH to CPU energy report feature. + $EN_DIS +**/ + UINT8 PchPmDisableEnergyReport; + +/** Offset 0x0A5F - PCH Pm Pmc Read Disable + When set to true, this bit disallows host reads to PMC XRAM. + $EN_DIS +**/ + UINT8 PchPmPmcReadDisable; + +/** Offset 0x0A60 - PCH Sata Test Mode + Allow entrance to the PCH SATA test modes. + $EN_DIS +**/ + UINT8 SataTestMode; + +/** Offset 0x0A61 - PCH USB OverCurrent mapping lock enable + If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning + that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. + $EN_DIS +**/ + UINT8 PchXhciOcLock; + +/** Offset 0x0A62 - PCH USB Access Control setting + This policy option controls setting the Access Control (ACCTRL) bit in XHCC1 which + will lock write access to registers controlled by its functionality. + $EN_DIS +**/ + UINT8 PchXhciAcLock; + +/** Offset 0x0A63 +**/ + UINT8 UnusedUpdSpace25[15]; + +/** Offset 0x0A72 - Skip POSTBOOT SAI + This skip the Post Boot Sai programming. 0: Set Post Boot Sai; 1: Skip Post Boot Sai. + $EN_DIS +**/ + UINT8 SkipPostBootSai; + +/** Offset 0x0A73 +**/ + UINT8 ReservedFspsTestUpd[13]; +} FSP_S_TEST_CONFIG; + +/** Fsp S Restricted Configuration +**/ +typedef struct { + +/** Offset 0x0A80 +**/ + UINT32 Signature; + +/** Offset 0x0A84 +**/ + UINT8 UnusedUpdSpace26; + +/** Offset 0x0A85 - Enable or disable GNA Error Check Disable Bit + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 TestGnaErrorCheckDis; + +/** Offset 0x0A86 - Enable or disable VT-d DmaPassThrough + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DmaPassThrough; + +/** Offset 0x0A87 - Enable or disable VT-d CCHit2pend + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 CCHit2pend; + +/** Offset 0x0A88 - Enable or disable VT-d ContextInvalidation + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 ContextInvalidation; + +/** Offset 0x0A89 - Enable or disable VT-d IotlbInvalidation + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 IotlbInvalidation; + +/** Offset 0x0A8A - Enable or disable VT-d ContextCacheDis + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 ContextCacheDis; + +/** Offset 0x0A8B - Enable or disable VT-d L1Disable + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 L1Disable; + +/** Offset 0x0A8C - Enable or disable VT-d L2Disable + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 L2Disable; + +/** Offset 0x0A8D - Enable or disable VT-d L3Disable + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 L3Disable; + +/** Offset 0x0A8E - Enable or disable VT-d L1Hit2PendDis + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 L1Hit2PendDis; + +/** Offset 0x0A8F - Enable or disable VT-d L3Hit2PendDis + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 L3Hit2PendDis; + +/** Offset 0x0A90 - Enable or disable VT-d InvQueueCohDis + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 InvQueueCohDis; + +/** Offset 0x0A91 - Enable or disable VT-d SuperPageCap + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 SuperPageCap; + +/** Offset 0x0A92 - Enable or disable VT-d QueueInvCapDis + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 QueueInvCapDis; + +/** Offset 0x0A93 - Enable or disable VT-d IntrRemapCapDis + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 TestIntrRemapCapDis; + +/** Offset 0x0A94 - Enable or disable VT-d SnoopControl + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 SnoopControl; + +/** Offset 0x0A95 - Enable or disable VT-d RemapReverseCtrl + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 RemapReverseCtrl; + +/** Offset 0x0A96 - Enable or disable VT-d SvPolicyEnable + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 VtdSvPolicyEnable; + +/** Offset 0x0A97 - Sa Graphics Pei Test Force Wake + Test Force Wake +**/ + UINT8 SaTestForceWake; + +/** Offset 0x0A98 - Sa Graphics Pei Test Gfx Pause + Test Gfx Pause +**/ + UINT8 SaTestGfxPause; + +/** Offset 0x0A99 - Sa Graphics Pei Test Graphics Freq Modify + Test Graphics Freq Modify +**/ + UINT8 SaTestGraphicsFreqModify; + +/** Offset 0x0A9A - Sa Graphics Pei Test PmLock + Test PmLock +**/ + UINT8 SaTestPmLock; + +/** Offset 0x0A9B - Sa Graphics Pei Test Pavp Heavy Mode + Test Pavp Heavy Mode +**/ + UINT8 SaTestPavpHeavyMode; + +/** Offset 0x0A9C - Sa Graphics Pei Test Dop ClockGating + Test Dop ClockGating +**/ + UINT8 SaTestDopClockGating; + +/** Offset 0x0A9D - Sa Graphics Pei Test Unsolicited Attack Override + Test Unsolicited Attack Override +**/ + UINT8 SaTestUnsolicitedAttackOverride; + +/** Offset 0x0A9E - Sa Graphics Pei Test WOPCM Support + Test WOPCM Support +**/ + UINT8 SaTestWOPCMSupport; + +/** Offset 0x0A9F - Sa Graphics Pei Test Pavp Asmf + Test Pavp Asmf +**/ + UINT8 SaTestPavpAsmf; + +/** Offset 0x0AA0 - Sa Graphics Pei Test Power Gating + Test Power Gating +**/ + UINT8 SaTestPowerGating; + +/** Offset 0x0AA1 - Sa Graphics Pei Test Unit Level ClockGating + Test Unit Level ClockGating +**/ + UINT8 SaTestUnitLevelClockGating; + +/** Offset 0x0AA2 - Sa Graphics Pei Test Auto TearDown + Test Auto TearDown +**/ + UINT8 SaTestAutoTearDown; + +/** Offset 0x0AA3 - Sa Graphics Pei Test Graphics Video Freq + Test Graphics Video Freq +**/ + UINT8 SaTestGraphicsVideoFreq; + +/** Offset 0x0AA4 - Sa Graphics Pei Test WOPCM Size + Test WOPCM Size +**/ + UINT8 SaTestWOPCMSize; + +/** Offset 0x0AA5 - Sa Graphics Pei Test Graphics Freq Req + Test Graphics Freq Req +**/ + UINT8 SaTestGraphicsFreqReq; + +/** Offset 0x0AA6 - Sa Test Peg Aspm L0s Aggression + Test Peg Aspm L0s Aggression +**/ + UINT8 SaTestPegAspmL0sAggression[4]; + +/** Offset 0x0AAA - Sa Clear CorrUnCorrErr Enable + Clear CorrUnCorrErr Enable + $EN_DIS +**/ + UINT8 SaClearCorrUnCorrErrEnable; + +/** Offset 0x0AAB - Sa SvPegArifen + SvPegArifen +**/ + UINT8 SaSvPegArifen[4]; + +/** Offset 0x0AAF - Sa Peg0 Completion Timeout + Peg0 Completion Timeout +**/ + UINT8 SaPeg0CompletionTimeout; + +/** Offset 0x0AB0 - Sa Peg1 Completion Timeout + Peg1 Completion Timeout +**/ + UINT8 SaPeg1CompletionTimeout; + +/** Offset 0x0AB1 - Sa Peg2 Completion Timeout + Peg2 Completion Timeout +**/ + UINT8 SaPeg2CompletionTimeout; + +/** Offset 0x0AB2 - Sa Peg3 Completion Timeout + Peg3 Completion Timeout +**/ + UINT8 SaPeg3CompletionTimeout; + +/** Offset 0x0AB3 - Sa Sv Peg Compliance Deemphasis + SvPegComplianceDeemphasis +**/ + UINT8 SaSvPegComplianceDeemphasis[4]; + +/** Offset 0x0AB7 - Sa Sv Peg TxLn Staggering Mode + SvPegTxLnStaggeringMode +**/ + UINT8 SaSvPegTxLnStaggeringMode[4]; + +/** Offset 0x0ABB - Sa Sv Peg TxLane Staggering Interval + SvPegTxLaneStaggeringInterval +**/ + UINT8 SaSvPegTxLaneStaggeringInterval[4]; + +/** Offset 0x0ABF - Sa Sv Peg RxLn Staggering Mode + SvPegRxLnStaggeringMode +**/ + UINT8 SaSvPegRxLnStaggeringMode[4]; + +/** Offset 0x0AC3 - Sa Sv Peg RxLane Staggering Interval + SvPegRxLaneStaggeringInterval +**/ + UINT8 SaSvPegRxLaneStaggeringInterval[4]; + +/** Offset 0x0AC7 - Sa Test MpllOffSen + TestMpllOffSen +**/ + UINT8 SaTestMpllOffSen; + +/** Offset 0x0AC8 - Sa Test MdllOffSen + TestMdllOffSen +**/ + UINT8 SaTestMdllOffSen; + +/** Offset 0x0AC9 - Sa Test Mode Edram Internal + Edram Enable Option +**/ + UINT8 SaTestModeEdramInternal; + +/** Offset 0x0ACA - Sa Test Security Lock + Enable/Disable Security lock +**/ + UINT8 SaTestSecurityLock; + +/** Offset 0x0ACB +**/ + UINT8 UnusedUpdSpace27[49]; + +/** Offset 0x0AFC - SaPostMemRestrictedRsvd + Reserved for SA Post-Mem Restricted + $EN_DIS +**/ + UINT8 SaPostMemRestrictedRsvd[22]; + +/** Offset 0x0B12 - CpuPostMemRestrictedRsvd + Reserved for CPU Post-Mem Restricted + $EN_DIS +**/ + UINT8 CpuPostMemRestrictedRsvd[16]; + +/** Offset 0x0B22 - BiosGuardModulePtr + BiosGuardModulePtr default values +**/ + UINT8 EnableSgx7a; + +/** Offset 0x0B23 - SgxDebugMode + SgxDebugMode default values +**/ + UINT8 SgxDebugMode; + +/** Offset 0x0B24 - SvLtEnable + SvLtEnable default values +**/ + UINT8 SvLtEnable; + +/** Offset 0x0B25 - SelectiveEnableSgx + SelectiveEnableSgx default values +**/ + UINT8 SelectiveEnableSgx; + +/** Offset 0x0B26 - EpcOffset + EpcOffset default values +**/ + UINT64 EpcOffset; + +/** Offset 0x0B2E - EpcLength + EpcLength default values +**/ + UINT64 EpcLength; + +/** Offset 0x0B36 - SgxLCP + SgxLCP default values +**/ + UINT8 SgxLCP; + +/** Offset 0x0B37 - EpcLength + EpcLength default values +**/ + UINT64 SgxLEPubKeyHash0; + +/** Offset 0x0B3F - EpcLength + EpcLength default values +**/ + UINT64 SgxLEPubKeyHash1; + +/** Offset 0x0B47 - EpcLength + EpcLength default values +**/ + UINT64 SgxLEPubKeyHash2; + +/** Offset 0x0B4F - EpcLength + EpcLength default values +**/ + UINT64 SgxLEPubKeyHash3; + +/** Offset 0x0B57 - CpuPostMemRestrictedRsvd + Reserved for CPU Post-Mem Restricted + $EN_DIS +**/ + UINT8 SecurityRestrictedRsvd[1]; + +/** Offset 0x0B58 - MEM CLOSED State on PCH side + Enable/Disable MEM CLOSED State on PCH side. + $EN_DIS +**/ + UINT8 PchDmiTestMemCloseStateEn; + +/** Offset 0x0B59 - Optimized Buffer Flush/Fill (OBFF) protocol for internal on PCH side + enable/disable Optimized Buffer Flush/Fill (OBFF) protocol for internal on PCH side. + $EN_DIS +**/ + UINT8 PchDmiTestInternalObffEn; + +/** Offset 0x0B5A - Determines if force extended transmission of FTS ordered sets + Determines if force extended transmission of FTS ordered sets when exiting L0s prior + to entering L0. +**/ + UINT8 PchDmiTestDmiExtSync; + +/** Offset 0x0B5B - Optimized Buffer Flush/Fill (OBFF) protocol for external on PCH side + Enable/Disable Optimized Buffer Flush/Fill (OBFF) protocol for external on PCH side. + $EN_DIS +**/ + UINT8 PchDmiTestExternalObffEn; + +/** Offset 0x0B5C - Client Obff Enable + Client Obff Enable. + $EN_DIS +**/ + UINT8 PchDmiTestClientObffEn; + +/** Offset 0x0B5D - CxObff Entry Delay + CxObff Entry Delay. +**/ + UINT8 PchDmiTestCxObffEntryDelay; + +/** Offset 0x0B5E +**/ + UINT8 UnusedUpdSpace28; + +/** Offset 0x0B5F - Pch Tc Lock Down + Pch Tc Lock Down. + $EN_DIS +**/ + UINT8 PchDmiTestPchTcLockDown; + +/** Offset 0x0B60 - Enable DMI ASPM after booting to OS + Enable DMI ASPM after booting to OS. + $EN_DIS +**/ + UINT8 PchDmiTestDelayEnDmiAspm; + +/** Offset 0x0B61 - Dmi Aspm Ctrl + Dmi Aspm Ctrl. + $EN_DIS +**/ + UINT8 PchDmiTestDmiAspmCtrl; + +/** Offset 0x0B62 - DMI Secure Reg Lock + DMI Secure Reg Lock. + 0: POR (Enable), 1: Enable, 2: Disable +**/ + UINT8 PchDmiTestDmiSecureRegLock; + +/** Offset 0x0B63 +**/ + UINT8 UnusedUpdSpace29; + +/** Offset 0x0B64 - Configuration Lockdown (BCLD) + 0: POR (Enable), 1: Enable, 2: Disable. + 0: POR (Enable), 1: Enable, 2: Disable +**/ + UINT8 PchHdaTestConfigLockdown; + +/** Offset 0x0B65 - Low Frequency Link Clock Source (LFLCS) + 0: POR (Enable), 1: Enable (XTAL), 2: Disable (Audio PLL). + 0: POR (Enable), 1: Enable (XTAL), 2: Disable (Audio PLL) +**/ + UINT8 PchHdaTestLowFreqLinkClkSrc; + +/** Offset 0x0B66 - I2s Configuration + 0: Disabled, 1: Realtek ALC298, 2: Realtek ALC286S, 3: Analog Devices, 4: I2S_24b_48kHz_Master, + 5: I2S_24b_48kHz_Slave, 6: PCM_16b_8kHz_Master, 7: PCM_16b_8kHz_Slave. +**/ + UINT32 PchHdaTestI2sConfiguration; + +/** Offset 0x0B6A - PCH Lan Test WOL Fast Support + Enables bit B_PCH_ACPI_GPE0_EN_127_96_PME_B0 during PchLanSxCallback in PchLanSxSmm. + $EN_DIS +**/ + UINT8 PchLanTestPchWOLFastSupport; + +/** Offset 0x0B6B - Smi Unlock bit for SV policy + 0: Lock; 1: Unlock. + $EN_DIS +**/ + UINT8 PchLockDownTestSmiUnlock; + +/** Offset 0x0B6C - PchPostMemRestrictedRsvd + Reserved for PCH Post-Mem Restricted Reserved + $EN_DIS +**/ + UINT8 PchPostMemRestrictedRsvd[24]; + +/** Offset 0x0B84 - Gen3 EQ Phase2 Tx override + Coefficient requested by the remote device is ignored. +**/ + UINT8 PcieRpTestEqPh2Override[24]; + +/** Offset 0x0B9C - Tx preset to use when TestEqPh2Override is set + Tx preset to use when TestEqPh2Override is set. +**/ + UINT8 PcieRpTestEqPh2Preset[24]; + +/** Offset 0x0BB4 - Enable/Disable ASPM Optionality Compliance + Enable/Disable ASPM Optionality Compliance. +**/ + UINT8 PcieRpTestAspmOc[24]; + +/** Offset 0x0BCC - Force LTR Override + Force LTR Override. +**/ + UINT8 PcieRpTestForceLtrOverride[24]; + +/** Offset 0x0BE4 +**/ + UINT8 UnusedUpdSpace30[72]; + +/** Offset 0x0C2C - PCH Pcie bem + PCH Pcie bem. +**/ + UINT8 PcieTestPchPciebem; + +/** Offset 0x0C2D - PCH Pcie Test bem Port Index + PCH Pcie Test bem Port Index. +**/ + UINT8 PcieTestPchPciebemPortIndex; + +/** Offset 0x0C2E - PCH Test PcieRp dbc gen + PCH Test PcieRp dbc gen. +**/ + UINT8 PcieTestPchPcieRpdbcgen; + +/** Offset 0x0C2F - PCH Test PcieRp dlc gen + PCH Test PcieRp dlc gen. +**/ + UINT8 PcieTestPchPcieRpdlcgen; + +/** Offset 0x0C30 - PCH Test Pcie Dcgeisma + PCH Test Pcie Dcgeisma. +**/ + UINT8 PcieTestPchPcieDcgeisma; + +/** Offset 0x0C31 - PCH Test PcieRp scgen + PCH Test PcieRp scgen. +**/ + UINT8 PcieTestPchPcieRpscgen; + +/** Offset 0x0C32 - PCH Test Pcie Srdbcgen + PCH Test Pcie Srdbcgen. +**/ + UINT8 PcieTestPchPcieSrdbcgen; + +/** Offset 0x0C33 - PCH Test Pcie Scptcge + PCH Test Pcie Scptcge. +**/ + UINT8 PcieTestPchPcieScptcge; + +/** Offset 0x0C34 - PCH Test Pcie Fdppge + PCH Test Pcie Fdppge. +**/ + UINT8 PcieTestPchPcieFdppge; + +/** Offset 0x0C35 - PCH Test Pcie Phyclpge + PCH Test Pcie Phyclpge. +**/ + UINT8 PcieTestPchPciePhyclpge; + +/** Offset 0x0C36 - PCH Test Pcie Fdcpge + PCH Test Pcie Fdcpge. +**/ + UINT8 PcieTestPchPcieFdcpge; + +/** Offset 0x0C37 - PCH Test Pcie Detscpge + PCH Test Pcie Detscpge. +**/ + UINT8 PcieTestPchPcieDetscpge; + +/** Offset 0x0C38 - PCH Test Pcie L23 rdyscpge + PCH Test Pcie L23 rdyscpge. +**/ + UINT8 PcieTestPchPcieL23rdyscpge; + +/** Offset 0x0C39 - PCH Test Pcie Disscpge + PCH Test Pcie Disscpge. +**/ + UINT8 PcieTestPchPcieDisscpge; + +/** Offset 0x0C3A - PCH Test Pcie L1 scpge + PCH Test Pcie L1 scpge. +**/ + UINT8 PcieTestPchPcieL1scpge; + +/** Offset 0x0C3B - PCH Pcie Test Lane Eq En + PCH PcieTest Lane Eq En. +**/ + UINT8 PcieTestLaneEqEn; + +/** Offset 0x0C3C - PCH Pcie Test Sw Eq Override + PCH Pcie bem. +**/ + UINT8 PcieTestSwEqOverride; + +/** Offset 0x0C3D - PCH Pcie Test Sw Eq Dwell Time Us + PCH Pcie Test Sw Eq Dwell Time Us. +**/ + UINT16 PcieTestSwEqDwellTimeUs; + +/** Offset 0x0C3F - PCH Pcie Test Sw Eq Error Threshold + PCH Pcie Test Sw Eq Error Threshold. +**/ + UINT16 PcieTestSwEqErrorThreshold; + +/** Offset 0x0C41 - PCH Pcie Test Sw Eq Rec Threshold + PCH Pcie Test Sw Eq Rec Threshold. +**/ + UINT16 PcieTestSwEqRecThreshold; + +/** Offset 0x0C43 - PCH Pcie Test Sw Eq Retrain Timeout Ms + PCH Pcie Test Sw Eq Retrain Timeout Ms. +**/ + UINT16 PcieTestSwEqRetrainTimeoutMs; + +/** Offset 0x0C45 - PCH Pcie Test Sw Eq Recovery Wait + PCH Pcie Test Sw Eq Recovery Wait. +**/ + UINT16 PcieTestSwEqRecoveryWait; + +/** Offset 0x0C47 - PCH Pm Register Lock + PCH Pm Register Lock. +**/ + UINT8 PchPmTestPchPmRegisterLock; + +/** Offset 0x0C48 - PCH Pm Test SlpS0 CsMe PgQDis + CPPM VRIC CSME Power Gated Qualification Disable. +**/ + UINT8 PchPmTestSlpS0CsMePgQDis; + +/** Offset 0x0C49 - PCH Pm Test Slp S0 Gbe Disc QDis + CPPM VRIC GbE Disconnected Qualification Disable. +**/ + UINT8 PchPmTestSlpS0GbeDiscQDis; + +/** Offset 0x0C4A - PCH Pm Test Slp S0A Dsp D3 QDis + CPPM VRIC Audio DSP is in D3 Qualification Disable. +**/ + UINT8 PchPmTestSlpS0ADspD3QDis; + +/** Offset 0x0C4B - PCH Pm Test Slp S0 Xhci D3QDis + CPPM VRIC XHCI is in D3 Qualification Disable. +**/ + UINT8 PchPmTestSlpS0XhciD3QDis; + +/** Offset 0x0C4C - PCH Pm Test Slp S0 Lpio D3QDis + CPPM VRIC LPIO is in D3 Qualification Disable. +**/ + UINT8 PchPmTestSlpS0LpioD3QDis; + +/** Offset 0x0C4D - PCH Pm Test Slp S0 Icc Pll W BEn + CPPM VRIC ICC PLL Wake Block Enable. +**/ + UINT8 PchPmTestSlpS0IccPllWBEn; + +/** Offset 0x0C4E - PCH Pm Test Slp S0 PUGB En + PCH Pm CPPM VRIC Power Ungate Block Enable. +**/ + UINT8 PchPmTestSlpS0PUGBEn; + +/** Offset 0x0C4F - PCH Pm Test Clear Power Sts + @todo ADD DESCRIPTION. Policy for SV usage. NO USE.. +**/ + UINT8 PchPmTestPchClearPowerSts; + +/** Offset 0x0C50 - PCH Sata Test Rst Pcie Storage Test Mode + PCIe Storage remapping Test Mode to override existing PCIe Storage remapping POR + setting for development purpose. +**/ + UINT8 SataTestRstPcieStorageTestMode[3]; + +/** Offset 0x0C53 - PCH Sata Test Rst Pcie Storage Port Config Check + Enable/Disable Port Configuration Check for RST PCIe Storage Remapping. +**/ + UINT8 SataTestRstPcieStoragePortConfigCheck[3]; + +/** Offset 0x0C56 - PCH Sata Test Rst Pcie Storage Device Interface + Select the device interface (AHCI/NVME) for remapped device. NO USE. +**/ + UINT8 SataTestRstPcieStorageDeviceInterface[3]; + +/** Offset 0x0C59 - PCH Sata Test Rst Pcie Storage Device Bar Size Check + Enable/Disable Device BAR Size Check for remapped device. +**/ + UINT8 SataTestRstPcieStorageDeviceBarSizeCheck[3]; + +/** Offset 0x0C5C - PCH Sata Test Rst Pcie Storage Device Bar Select + Select the device BAR (BAR0-BAR5) that will be used for Remapping. +**/ + UINT8 SataTestRstPcieStorageDeviceBarSelect[3]; + +/** Offset 0x0C5F - PCH Sata Test Rst Pcie Storage Device Interrupt + Select the device interrupt (Legacy/MSIX) for remapped device. +**/ + UINT8 SataTestRstPcieStorageDeviceInterrupt[3]; + +/** Offset 0x0C62 - PCH Sata Test Rst Pcie Storage Aspm Programming + Enable/Disable ASPM Programming for remapped device. +**/ + UINT8 SataTestRstPcieStorageAspmProgramming[3]; + +/** Offset 0x0C65 - PCH Sata Test Rst Pcie Storage Save Restore + Enable/Disable ASPM Programming for remapped device. +**/ + UINT8 SataTestRstPcieStorageSaveRestore[3]; + +/** Offset 0x0C68 - Latency Tolerance Reporting Mechanism + Latency Tolerance Reporting Mechanism. +**/ + UINT8 SataTestLtrEnable; + +/** Offset 0x0C69 - Latency Tolerance Reporting Mechanism + Latency Tolerance Reporting Mechanism. +**/ + UINT8 SataTestLtrConfigLock; + +/** Offset 0x0C6A - Latency Tolerance Reporting Mechanism + Latency Tolerance Reporting Mechanism. +**/ + UINT8 SataTestLtrOverride; + +/** Offset 0x0C6B - Latency Tolerance Reporting Mechanism + Latency Tolerance Reporting Mechanism. +**/ + UINT8 SataTestSnoopLatencyOverrideMultiplier; + +/** Offset 0x0C6C - Latency Tolerance Reporting Mechanism + Latency Tolerance Reporting Mechanism. +**/ + UINT16 SataTestSnoopLatencyOverrideValue; + +/** Offset 0x0C6E - Latency Tolerance Reporting Mechanism + Latency Tolerance Reporting Mechanism. +**/ + UINT8 SataTestSataAssel; + +/** Offset 0x0C6F +**/ + UINT8 UnusedUpdSpace31[2]; + +/** Offset 0x0C71 - This locks down Enables the thermal sensor + 0: Disabled, 1: Enabled. + $EN_DIS +**/ + UINT8 PchTestTselLock; + +/** Offset 0x0C72 - This locks down Catastrophic Power-Down Enable and Catastrophic Trip Point Register + 0: Disabled, 1: Enabled. + $EN_DIS +**/ + UINT8 PchTestTscLock; + +/** Offset 0x0C73 - This locks down PHL and PHLC + 0: Disabled, 1: Enabled. + $EN_DIS +**/ + UINT8 PchTestPhlcLock; + +/** Offset 0x0C74 +**/ + UINT8 UnusedUpdSpace32[10]; + +/** Offset 0x0C7E - USB EP Type Lock Policy + USB EP Type Lock Policy. +**/ + UINT32 PchTestEPTypeLockPolicy; + +/** Offset 0x0C82 - USB EP Type Lock Policy Control 1 + USB EP Type Lock Policy Control 1. +**/ + UINT32 PchTestEPTypeLockPolicyPortControl1; + +/** Offset 0x0C86 - USB EP Type Lock Policy Control 2 + USB EP Type Lock Policy Control 2. +**/ + UINT32 PchTestEPTypeLockPolicyPortControl2; + +/** Offset 0x0C8A +**/ + UINT8 UnusedUpdSpace33[4]; + +/** Offset 0x0C8E - Xhci Controller Enable + 0: Disable; 1: Enable. +**/ + UINT8 PchTestControllerEnabled; + +/** Offset 0x0C8F +**/ + UINT8 UnusedUpdSpace34; + +/** Offset 0x0C90 - Unlock to enable NOA for SV usage + 1: Unlock to enable NOA usage. 0: Set Xhci OC registers, Set Xhci OCCDone bit, XHCI + Access Control Bit. + $EN_DIS +**/ + UINT8 PchTestUnlockUsbForSvNoa; + +/** Offset 0x0C91 - Enable XHCI Clock Gating for SV usage + 1: Enable XHCI Clock Gating. 0: Disable XHCI Clock Gating. Policy for SV usage. + $EN_DIS +**/ + UINT8 PchTestClkGatingXhci; + +/** Offset 0x0C92 - Restricted Cyclone Pcie Switch WA + Restricted Cyclone Pcie Switch WA. +**/ + UINT8 PchTestCyclonePcieSwitchWA; + +/** Offset 0x0C93 - Restricted Pch Root Port + Restricted Pch Root Port. +**/ + UINT8 PchTestPchRootPort; + +/** Offset 0x0C94 +**/ + UINT8 UnusedUpdSpace35[2]; + +/** Offset 0x0C96 - Restricted Flash Lock Down + Restricted Flash Lock Down. +**/ + UINT8 PchTestFlashLockDown; + +/** Offset 0x0C97 - Restricted Mctp Broad cast Cycle + Determine if MCTP Broadcast is enabled. 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE. + 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE +**/ + UINT8 PchTestMctpBroadcastCycle; + +/** Offset 0x0C98 +**/ + UINT8 UnusedUpdSpace36; + +/** Offset 0x0C99 - PCH PMC ER Debug mode + Disable/Enable Energy Reporting Debug Mode. + $EN_DIS +**/ + UINT8 TestPchPmErDebugMode; + +/** Offset 0x0C9A - PCH ACPI Timer Disable + 0: False, Acpi Timer is enabled; 1: True, Acpi Timer is disabled + $EN_DIS +**/ + UINT8 TestAcpiTmrDisable; + +/** Offset 0x0C9B +**/ + UINT8 UnusedUpdSpace37; + +/** Offset 0x0C9C - USB2/TS LDO Dynamic Shutdown + Enable/Disable USB2/TS LDO Dynamic Shutdown + 0: POR, 1: force enable, 2: force disable +**/ + UINT8 TestUsbTsLdoShutdown; + +/** Offset 0x0C9D - OPI PLL Power Gating + OPI PLL Power Gating. + 0: POR, 1: force enable, 2: force disable +**/ + UINT8 PchDmiTestOpiPllPowerGating; + +/** Offset 0x0C9E - HDA Power/Clock Gating (PGD/CGD) + Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1: + FORCE_ENABLE, 2: FORCE_DISABLE. + 0: POR, 1: Force Enable, 2: Force Disable +**/ + UINT8 PchHdaTestPowerClockGating; + +/** Offset 0x0C9F - CNVi BT Core + Enable/Disable CNVi BT Core. 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE. + 0: POR, 1: Force Enable, 2: Force Disable +**/ + UINT8 TestCnviBtCore; + +/** Offset 0x0CA0 - CNVi BT Wireless Charging + Enable/Disable CNVi BT Wireless Charging. 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE. + 0: POR, 1: Force Enable, 2: Force Disable +**/ + UINT8 TestCnviBtWirelessCharging; + +/** Offset 0x0CA1 - CNVi WiFi LTR + Enable/Disable CNVi WiFi LTR. 0: PLATFORM_POR, 1: FORCE_ENABLE, 2: FORCE_DISABLE. + 0: POR, 1: Force Enable, 2: Force Disable +**/ + UINT8 TestCnviWifiLtrEn; + +/** Offset 0x0CA2 - PCH Pm Latch events C10 exit + PCH Pm Latch events C10 exit Enable. + 0: POR, 1: force enable, 2: force disable +**/ + UINT8 TestPchPmLatchEventsC10Exit; + +/** Offset 0x0CA3 - CNVi LTE Coexistence + Enable/Disable MFUART2 connection for coexistence between LTE and Wi-Fi/BT. 0: PLATFORM_POR, + 1: FORCE_ENABLE, 2: FORCE_DISABLE. + 0: POR, 1: Force Enable, 2: Force Disable +**/ + UINT8 TestCnviLteCoex; + +/** Offset 0x0CA4 - PCIE Allow L0s with Gen3 + Allows PCH rootports to have both L0s and Gen3 speed enabled at the same time. + $EN_DIS +**/ + UINT8 PcieAllowL0sWithGen3; + +/** Offset 0x0CA5 - PchSiliconRestrictedRsvd + Reserved for CPU Post-Mem Restricted + $EN_DIS +**/ + UINT8 PchSiliconRestrictedRsvd[5]; + +/** Offset 0x0CAA - Si Config SvPolicyEnable. + Platform specific common policies that used by several silicon components. SvPolicyEnable. + $EN_DIS +**/ + UINT8 SiSvPolicyEnable; + +/** Offset 0x0CAB - Si Config HsleWorkaround + Enable/Disable HSLE model specific workarounds + $EN_DIS +**/ + UINT8 HsleWorkaround; + +/** Offset 0x0CAC +**/ + UINT8 ReservedFspsRestrictedUpd[4]; +} FSP_S_RESTRICTED_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSP_S_CONFIG FspsConfig; + +/** Offset 0x07AD +**/ + FSP_S_TEST_CONFIG FspsTestConfig; + +/** Offset 0x0A80 +**/ + FSP_S_RESTRICTED_CONFIG FspsRestrictedConfig; + +/** Offset 0x0CB0 +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/src/vendorcode/intel/fsp/fsp2_0/cannonlake/MemInfoHob.h b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/MemInfoHob.h new file mode 100644 index 0000000000..7927e239d4 --- /dev/null +++ b/src/vendorcode/intel/fsp/fsp2_0/cannonlake/MemInfoHob.h @@ -0,0 +1,280 @@ +/** @file + This file contains definitions required for creation of + Memory S3 Save data, Memory Info data and Memory Platform + data hobs. + +@copyright + INTEL CONFIDENTIAL + Copyright 1999 - 2017 Intel Corporation. + + The source code contained or described herein and all documents related to the + source code ("Material") are owned by Intel Corporation or its suppliers or + licensors. Title to the Material remains with Intel Corporation or its suppliers + and licensors. The Material may contain trade secrets and proprietary and + confidential information of Intel Corporation and its suppliers and licensors, + and is protected by worldwide copyright and trade secret laws and treaty + provisions. No part of the Material may be used, copied, reproduced, modified, + published, uploaded, posted, transmitted, distributed, or disclosed in any way + without Intel's prior express written permission. + + No license under any patent, copyright, trade secret or other intellectual + property right is granted to or conferred upon you by disclosure or delivery + of the Materials, either expressly, by implication, inducement, estoppel or + otherwise. Any license under such intellectual property rights must be + express and approved by Intel in writing. + + Unless otherwise agreed by Intel in writing, you may not remove or alter + this notice or any other notice embedded in Materials by Intel or + Intel's suppliers or licensors in any way. + + This file contains an 'Intel Peripheral Driver' and is uniquely identified as + "Intel Reference Module" and is licensed for Intel CPUs and chipsets under + the terms of your license agreement with Intel or your vendor. This file may + be modified by the user, subject to additional terms of the license agreement. + +@par Specification Reference: +**/ +#ifndef _MEM_INFO_HOB_H_ +#define _MEM_INFO_HOB_H_ + +#pragma pack (push, 1) + +extern EFI_GUID gSiMemoryS3DataGuid; +extern EFI_GUID gSiMemoryInfoDataGuid; +extern EFI_GUID gSiMemoryPlatformDataGuid; + +#define MAX_NODE 1 +#define MAX_CH 2 +#define MAX_DIMM 2 + +/// +/// Host reset states from MRC. +/// +#define WARM_BOOT 2 + +#define R_MC_CHNL_RANK_PRESENT 0x7C +#define B_RANK0_PRS BIT0 +#define B_RANK1_PRS BIT1 +#define B_RANK2_PRS BIT4 +#define B_RANK3_PRS BIT5 + +// @todo remove and use the MdePkg\Include\Pi\PiHob.h +#if !defined(_PEI_HOB_H_) && !defined(__PI_HOB_H__) +#ifndef __HOB__H__ +typedef struct _EFI_HOB_GENERIC_HEADER { + UINT16 HobType; + UINT16 HobLength; + UINT32 Reserved; +} EFI_HOB_GENERIC_HEADER; + +typedef struct _EFI_HOB_GUID_TYPE { + EFI_HOB_GENERIC_HEADER Header; + EFI_GUID Name; + /// + /// Guid specific data goes here + /// +} EFI_HOB_GUID_TYPE; +#endif +#endif + +/// +/// Defines taken from MRC so avoid having to include MrcInterface.h +/// + +// +// Matches MAX_SPD_SAVE define in MRC +// +#ifndef MAX_SPD_SAVE +#define MAX_SPD_SAVE 29 +#endif + +// +// MRC version description. +// +typedef struct { + UINT8 Major; ///< Major version number + UINT8 Minor; ///< Minor version number + UINT8 Rev; ///< Revision number + UINT8 Build; ///< Build number +} SiMrcVersion; + +// +// Matches MrcDimmSts enum in MRC +// +#ifndef DIMM_ENABLED +#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected. +#endif +#ifndef DIMM_DISABLED +#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence. +#endif +#ifndef DIMM_PRESENT +#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used. +#endif +#ifndef DIMM_NOT_PRESENT +#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair. +#endif + +// +// Matches MrcBootMode enum in MRC +// +#ifndef bmCold +#define bmCold 0 // Cold boot +#endif +#ifndef bmWarm +#define bmWarm 1 // Warm boot +#endif +#ifndef bmS3 +#define bmS3 2 // S3 resume +#endif +#ifndef bmFast +#define bmFast 3 // Fast boot +#endif + +// +// Matches MrcDdrType enum in MRC +// +#ifndef MRC_DDR_TYPE_DDR4 +#define MRC_DDR_TYPE_DDR4 0 +#endif +#ifndef MRC_DDR_TYPE_DDR3 +#define MRC_DDR_TYPE_DDR3 1 +#endif +#ifndef MRC_DDR_TYPE_LPDDR3 +#define MRC_DDR_TYPE_LPDDR3 2 +#endif +#ifndef MRC_DDR_TYPE_UNKNOWN +#define MRC_DDR_TYPE_UNKNOWN 3 +#endif + +#define MAX_PROFILE_NUM 4 // number of memory profiles supported +#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported + +// +// DIMM timings +// +typedef struct { + UINT32 tCK; ///< Memory cycle time, in femtoseconds. + UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. + UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. + UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. + UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. + UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. + UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. + UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. + UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time. + UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. + UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. + UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. + UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. + UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. + UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. + UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. + UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. + UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. + UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group. +} MRC_CH_TIMING; + +/// +/// Memory SMBIOS & OC Memory Data Hob +/// +typedef struct { + UINT8 Status; ///< See MrcDimmStatus for the definition of this field. + UINT8 DimmId; + UINT32 DimmCapacity; ///< DIMM size in MBytes. + UINT16 MfgId; + UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes + UINT8 RankInDimm; ///< The number of ranks in this DIMM. + UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. + UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. + UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. + UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. +} DIMM_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this channel should be used. + UINT8 ChannelId; + UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. + MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. + DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. +} CHANNEL_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this controller should be used. + UINT16 DeviceId; ///< The PCI device id of this memory controller. + UINT8 RevisionId; ///< The PCI revision id of this memory controller. + UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. + CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. +} CONTROLLER_INFO; + +typedef struct { + UINT8 Revision; + UINT16 DataWidth; ///< Data width, in bits, of this memory device + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 + UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) + UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + + SiMrcVersion Version; + BOOLEAN EccSupport; + UINT8 MemoryProfile; + UINT32 TotalPhysicalMemorySize; + UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. + UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. + UINT8 Ratio; + UINT8 RefClk; + UINT32 VddVoltage[MAX_PROFILE_NUM]; + CONTROLLER_INFO Controller[MAX_NODE]; +} MEMORY_INFO_DATA_HOB; + +/** + Memory Platform Data Hob + + <b>Revision 1:</b> + - Initial version. + <b>Revision 2:</b> + - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields +**/ +typedef struct { + UINT8 Revision; + UINT8 Reserved[3]; + UINT32 BootMode; + UINT32 TsegSize; + UINT32 TsegBase; + UINT32 PrmrrSize; + UINT32 PrmrrBase; + UINT32 GttBase; + UINT32 MmioSize; + UINT32 PciEBaseAddress; +#ifdef CPU_CFL + UINT32 GdxcIotBase; + UINT32 GdxcIotSize; + UINT32 GdxcMotBase; + UINT32 GdxcMotSize; +#endif //CPU_CFL +// +// CPU:RestrictedBegin +// + UINT32 SharedMailboxBase; +// +// CPU:RestrictedEnd +// +} MEMORY_PLATFORM_DATA; + +typedef struct { + EFI_HOB_GUID_TYPE EfiHobGuidType; + MEMORY_PLATFORM_DATA Data; + UINT8 *Buffer; +} MEMORY_PLATFORM_DATA_HOB; + +#pragma pack (pop) + +#endif // _MEM_INFO_HOB_H_ |