diff options
| author | David Hendricks <dhendricks@fb.com> | 2018-03-09 14:30:38 -0800 |
|---|---|---|
| committer | Philipp Deppenwiese <zaolin.daisuki@gmail.com> | 2018-07-03 15:53:32 +0000 |
| commit | 7d48ac5c7dfb52fc470bbad1013b4d460bc6a1e0 (patch) | |
| tree | 42002ba1e86627339ff4a6cf38efb4b3f00033bb /src/vendorcode/cavium/include/bdk/libbdk-arch/bdk-csrs-usbh.h | |
| parent | d837e660074e0621d63f59515f933c209441b653 (diff) | |
soc/cavium: Integrate BDK files into coreboot
* Make it compile.
* Fix whitespace errors.
* Fix printf formats.
* Add missing headers includes
* Guard headers with ifdefs
Compile DRAM init code in romstage.
Compile QLM, PCIe, RNG, PHY, GPIO, MDIO init code in ramstage.
Change-Id: I0a93219a14bfb6ebe41103a825d5032b11e7f2c6
Signed-off-by: David Hendricks <dhendricks@fb.com>
Reviewed-on: https://review.coreboot.org/25089
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/vendorcode/cavium/include/bdk/libbdk-arch/bdk-csrs-usbh.h')
| -rw-r--r-- | src/vendorcode/cavium/include/bdk/libbdk-arch/bdk-csrs-usbh.h | 7606 |
1 files changed, 7606 insertions, 0 deletions
diff --git a/src/vendorcode/cavium/include/bdk/libbdk-arch/bdk-csrs-usbh.h b/src/vendorcode/cavium/include/bdk/libbdk-arch/bdk-csrs-usbh.h new file mode 100644 index 0000000000..6754b437e1 --- /dev/null +++ b/src/vendorcode/cavium/include/bdk/libbdk-arch/bdk-csrs-usbh.h @@ -0,0 +1,7606 @@ +#ifndef __BDK_CSRS_USBH_H__ +#define __BDK_CSRS_USBH_H__ +/* This file is auto-generated. Do not edit */ + +/***********************license start*************** + * Copyright (c) 2003-2017 Cavium Inc. (support@cavium.com). All rights + * reserved. + * + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + + * * Neither the name of Cavium Inc. nor the names of + * its contributors may be used to endorse or promote products + * derived from this software without specific prior written + * permission. + + * This Software, including technical data, may be subject to U.S. export control + * laws, including the U.S. Export Administration Act and its associated + * regulations, and may be subject to export or import regulations in other + * countries. + + * TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS" + * AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS OR + * WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO + * THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR + * DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM + * SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, + * MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF + * VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR + * CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR + * PERFORMANCE OF THE SOFTWARE LIES WITH YOU. + ***********************license end**************************************/ + + +/** + * @file + * + * Configuration and status register (CSR) address and type definitions for + * Cavium USBH. + * + * This file is auto generated. Do not edit. + * + */ + +/** + * Enumeration uctl_ecc_err_source_e + * + * UCTL ECC Error Source Enumeration + * Enumerate sources of ECC error log information. + */ +#define BDK_UCTL_ECC_ERR_SOURCE_E_NONE (0) +#define BDK_UCTL_ECC_ERR_SOURCE_E_RAM0_DBE (0xf) +#define BDK_UCTL_ECC_ERR_SOURCE_E_RAM0_SBE (7) +#define BDK_UCTL_ECC_ERR_SOURCE_E_RAM1_DBE (0xe) +#define BDK_UCTL_ECC_ERR_SOURCE_E_RAM1_SBE (6) +#define BDK_UCTL_ECC_ERR_SOURCE_E_RAM2_DBE (0xd) +#define BDK_UCTL_ECC_ERR_SOURCE_E_RAM2_SBE (5) +#define BDK_UCTL_ECC_ERR_SOURCE_E_XM_R_DBE (0xa) +#define BDK_UCTL_ECC_ERR_SOURCE_E_XM_R_SBE (2) +#define BDK_UCTL_ECC_ERR_SOURCE_E_XM_W_DBE (9) +#define BDK_UCTL_ECC_ERR_SOURCE_E_XM_W_SBE (1) + +/** + * Enumeration usbh_bar_e + * + * USBH Base Address Register Enumeration + * Enumerates the base address registers. + */ +#define BDK_USBH_BAR_E_USBHX_PF_BAR0(a) (0x868000000000ll + 0x1000000000ll * (a)) +#define BDK_USBH_BAR_E_USBHX_PF_BAR0_SIZE 0x200000ull +#define BDK_USBH_BAR_E_USBHX_PF_BAR4(a) (0x868000200000ll + 0x1000000000ll * (a)) +#define BDK_USBH_BAR_E_USBHX_PF_BAR4_SIZE 0x100000ull + +/** + * Enumeration usbh_int_vec_e + * + * USBH MSI-X Vector Enumeration + * Enumerates the MSI-X interrupt vectors. + */ +#define BDK_USBH_INT_VEC_E_UAHC_IMAN_IP_CN88XXP1_1 (0) +#define BDK_USBH_INT_VEC_E_UAHC_IMAN_IP_CN88XXP1_0 (2) +#define BDK_USBH_INT_VEC_E_UAHC_IMAN_IP_CN88XXP2 (0) +#define BDK_USBH_INT_VEC_E_UAHC_USBSTS_HSE_CN88XXP1_1 (2) +#define BDK_USBH_INT_VEC_E_UAHC_USBSTS_HSE_CN88XXP1_0 (0) +#define BDK_USBH_INT_VEC_E_UAHC_USBSTS_HSE_CN88XXP2 (2) +#define BDK_USBH_INT_VEC_E_UAHC_USBSTS_HSE_CLEAR_CN88XXP1_1 (3) +#define BDK_USBH_INT_VEC_E_UAHC_USBSTS_HSE_CLEAR_CN88XXP1_0 (1) +#define BDK_USBH_INT_VEC_E_UAHC_USBSTS_HSE_CLEAR_CN88XXP2 (3) +#define BDK_USBH_INT_VEC_E_UCTL_INTSTAT_CN88XXP1_1 (1) +#define BDK_USBH_INT_VEC_E_UCTL_INTSTAT_CN88XXP1_0 (3) +#define BDK_USBH_INT_VEC_E_UCTL_INTSTAT_CN88XXP2 (1) + +/** + * Register (NCB) usbh#_msix_pba# + * + * USBH MSI-X Pending Bit Array Registers + * This register is the MSI-X PBA table, the bit number is indexed by the USBH_INT_VEC_E enumeration. + */ +union bdk_usbhx_msix_pbax +{ + uint64_t u; + struct bdk_usbhx_msix_pbax_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t pend : 64; /**< [ 63: 0](RO/H) Pending message for the associated USBH_MSIX_VEC()_CTL, enumerated by USBH_INT_VEC_E. + Bits that have no associated USBH_INT_VEC_E are zero. */ +#else /* Word 0 - Little Endian */ + uint64_t pend : 64; /**< [ 63: 0](RO/H) Pending message for the associated USBH_MSIX_VEC()_CTL, enumerated by USBH_INT_VEC_E. + Bits that have no associated USBH_INT_VEC_E are zero. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_msix_pbax_s cn; */ +}; +typedef union bdk_usbhx_msix_pbax bdk_usbhx_msix_pbax_t; + +static inline uint64_t BDK_USBHX_MSIX_PBAX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_MSIX_PBAX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x8680002f0000ll + 0x1000000000ll * ((a) & 0x1) + 8ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_MSIX_PBAX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_MSIX_PBAX(a,b) bdk_usbhx_msix_pbax_t +#define bustype_BDK_USBHX_MSIX_PBAX(a,b) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_MSIX_PBAX(a,b) "USBHX_MSIX_PBAX" +#define device_bar_BDK_USBHX_MSIX_PBAX(a,b) 0x4 /* PF_BAR4 */ +#define busnum_BDK_USBHX_MSIX_PBAX(a,b) (a) +#define arguments_BDK_USBHX_MSIX_PBAX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB) usbh#_msix_vec#_addr + * + * USBH MSI-X Vector Table Address Registers + * This register is the MSI-X vector table, indexed by the USBH_INT_VEC_E enumeration. + */ +union bdk_usbhx_msix_vecx_addr +{ + uint64_t u; + struct bdk_usbhx_msix_vecx_addr_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_49_63 : 15; + uint64_t addr : 47; /**< [ 48: 2](R/W) IOVA to use for MSI-X delivery of this vector. */ + uint64_t reserved_1 : 1; + uint64_t secvec : 1; /**< [ 0: 0](SR/W) Secure vector. + 0 = This vector may be read or written by either secure or nonsecure states. + 1 = This vector's USBH()_MSIX_VEC()_ADDR, USBH()_MSIX_VEC()_CTL, and + corresponding + bit of USBH()_MSIX_PBA() are RAZ/WI and does not cause a fault when accessed + by the nonsecure world. + + If PCCPF_USBH()_VSEC_SCTL[MSIX_SEC] (for documentation, see + PCCPF_XXX_VSEC_SCTL[MSIX_SEC]) is + set, all vectors are secure and function as if [SECVEC] was set. */ +#else /* Word 0 - Little Endian */ + uint64_t secvec : 1; /**< [ 0: 0](SR/W) Secure vector. + 0 = This vector may be read or written by either secure or nonsecure states. + 1 = This vector's USBH()_MSIX_VEC()_ADDR, USBH()_MSIX_VEC()_CTL, and + corresponding + bit of USBH()_MSIX_PBA() are RAZ/WI and does not cause a fault when accessed + by the nonsecure world. + + If PCCPF_USBH()_VSEC_SCTL[MSIX_SEC] (for documentation, see + PCCPF_XXX_VSEC_SCTL[MSIX_SEC]) is + set, all vectors are secure and function as if [SECVEC] was set. */ + uint64_t reserved_1 : 1; + uint64_t addr : 47; /**< [ 48: 2](R/W) IOVA to use for MSI-X delivery of this vector. */ + uint64_t reserved_49_63 : 15; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_msix_vecx_addr_s cn; */ +}; +typedef union bdk_usbhx_msix_vecx_addr bdk_usbhx_msix_vecx_addr_t; + +static inline uint64_t BDK_USBHX_MSIX_VECX_ADDR(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_MSIX_VECX_ADDR(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b<=3))) + return 0x868000200000ll + 0x1000000000ll * ((a) & 0x1) + 0x10ll * ((b) & 0x3); + __bdk_csr_fatal("USBHX_MSIX_VECX_ADDR", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_MSIX_VECX_ADDR(a,b) bdk_usbhx_msix_vecx_addr_t +#define bustype_BDK_USBHX_MSIX_VECX_ADDR(a,b) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_MSIX_VECX_ADDR(a,b) "USBHX_MSIX_VECX_ADDR" +#define device_bar_BDK_USBHX_MSIX_VECX_ADDR(a,b) 0x4 /* PF_BAR4 */ +#define busnum_BDK_USBHX_MSIX_VECX_ADDR(a,b) (a) +#define arguments_BDK_USBHX_MSIX_VECX_ADDR(a,b) (a),(b),-1,-1 + +/** + * Register (NCB) usbh#_msix_vec#_ctl + * + * USBH MSI-X Vector Table Control and Data Registers + * This register is the MSI-X vector table, indexed by the USBH_INT_VEC_E enumeration. + */ +union bdk_usbhx_msix_vecx_ctl +{ + uint64_t u; + struct bdk_usbhx_msix_vecx_ctl_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_33_63 : 31; + uint64_t mask : 1; /**< [ 32: 32](R/W) When set, no MSI-X interrupts will be sent to this vector. */ + uint64_t reserved_20_31 : 12; + uint64_t data : 20; /**< [ 19: 0](R/W) Data to use for MSI-X delivery of this vector. */ +#else /* Word 0 - Little Endian */ + uint64_t data : 20; /**< [ 19: 0](R/W) Data to use for MSI-X delivery of this vector. */ + uint64_t reserved_20_31 : 12; + uint64_t mask : 1; /**< [ 32: 32](R/W) When set, no MSI-X interrupts will be sent to this vector. */ + uint64_t reserved_33_63 : 31; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_msix_vecx_ctl_s cn; */ +}; +typedef union bdk_usbhx_msix_vecx_ctl bdk_usbhx_msix_vecx_ctl_t; + +static inline uint64_t BDK_USBHX_MSIX_VECX_CTL(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_MSIX_VECX_CTL(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b<=3))) + return 0x868000200008ll + 0x1000000000ll * ((a) & 0x1) + 0x10ll * ((b) & 0x3); + __bdk_csr_fatal("USBHX_MSIX_VECX_CTL", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_MSIX_VECX_CTL(a,b) bdk_usbhx_msix_vecx_ctl_t +#define bustype_BDK_USBHX_MSIX_VECX_CTL(a,b) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_MSIX_VECX_CTL(a,b) "USBHX_MSIX_VECX_CTL" +#define device_bar_BDK_USBHX_MSIX_VECX_CTL(a,b) 0x4 /* PF_BAR4 */ +#define busnum_BDK_USBHX_MSIX_VECX_CTL(a,b) (a) +#define arguments_BDK_USBHX_MSIX_VECX_CTL(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_caplength + * + * XHCI Capability Length Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.3.1. + */ +union bdk_usbhx_uahc_caplength +{ + uint32_t u; + struct bdk_usbhx_uahc_caplength_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t hciversion : 16; /**< [ 31: 16](RO) Host controller interface version number. */ + uint32_t reserved_8_15 : 8; + uint32_t caplength : 8; /**< [ 7: 0](RO) Capability registers length. */ +#else /* Word 0 - Little Endian */ + uint32_t caplength : 8; /**< [ 7: 0](RO) Capability registers length. */ + uint32_t reserved_8_15 : 8; + uint32_t hciversion : 16; /**< [ 31: 16](RO) Host controller interface version number. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_caplength_s cn; */ +}; +typedef union bdk_usbhx_uahc_caplength bdk_usbhx_uahc_caplength_t; + +static inline uint64_t BDK_USBHX_UAHC_CAPLENGTH(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_CAPLENGTH(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000000ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_CAPLENGTH", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_CAPLENGTH(a) bdk_usbhx_uahc_caplength_t +#define bustype_BDK_USBHX_UAHC_CAPLENGTH(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_CAPLENGTH(a) "USBHX_UAHC_CAPLENGTH" +#define device_bar_BDK_USBHX_UAHC_CAPLENGTH(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_CAPLENGTH(a) (a) +#define arguments_BDK_USBHX_UAHC_CAPLENGTH(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_config + * + * XHCI Configuration Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.7. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_config +{ + uint32_t u; + struct bdk_usbhx_uahc_config_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_8_31 : 24; + uint32_t maxslotsen : 8; /**< [ 7: 0](R/W) Maximum device slots enabled. */ +#else /* Word 0 - Little Endian */ + uint32_t maxslotsen : 8; /**< [ 7: 0](R/W) Maximum device slots enabled. */ + uint32_t reserved_8_31 : 24; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_config_s cn; */ +}; +typedef union bdk_usbhx_uahc_config bdk_usbhx_uahc_config_t; + +static inline uint64_t BDK_USBHX_UAHC_CONFIG(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_CONFIG(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000058ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_CONFIG", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_CONFIG(a) bdk_usbhx_uahc_config_t +#define bustype_BDK_USBHX_UAHC_CONFIG(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_CONFIG(a) "USBHX_UAHC_CONFIG" +#define device_bar_BDK_USBHX_UAHC_CONFIG(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_CONFIG(a) (a) +#define arguments_BDK_USBHX_UAHC_CONFIG(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uahc_crcr + * + * XHCI Command Ring Control Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.5. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_crcr +{ + uint64_t u; + struct bdk_usbhx_uahc_crcr_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t cmd_ring_ptr : 58; /**< [ 63: 6](WO) Command ring pointer. */ + uint64_t reserved_4_5 : 2; + uint64_t crr : 1; /**< [ 3: 3](RO/H) Command ring running. */ + uint64_t ca : 1; /**< [ 2: 2](WO) Command abort. */ + uint64_t cs : 1; /**< [ 1: 1](WO) Command stop. */ + uint64_t rcs : 1; /**< [ 0: 0](WO) Ring cycle state. */ +#else /* Word 0 - Little Endian */ + uint64_t rcs : 1; /**< [ 0: 0](WO) Ring cycle state. */ + uint64_t cs : 1; /**< [ 1: 1](WO) Command stop. */ + uint64_t ca : 1; /**< [ 2: 2](WO) Command abort. */ + uint64_t crr : 1; /**< [ 3: 3](RO/H) Command ring running. */ + uint64_t reserved_4_5 : 2; + uint64_t cmd_ring_ptr : 58; /**< [ 63: 6](WO) Command ring pointer. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_crcr_s cn; */ +}; +typedef union bdk_usbhx_uahc_crcr bdk_usbhx_uahc_crcr_t; + +static inline uint64_t BDK_USBHX_UAHC_CRCR(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_CRCR(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000038ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_CRCR", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_CRCR(a) bdk_usbhx_uahc_crcr_t +#define bustype_BDK_USBHX_UAHC_CRCR(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UAHC_CRCR(a) "USBHX_UAHC_CRCR" +#define device_bar_BDK_USBHX_UAHC_CRCR(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_CRCR(a) (a) +#define arguments_BDK_USBHX_UAHC_CRCR(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_db# + * + * XHCI Doorbell Registers + * For information on this register, refer to the xHCI Specification, v1.0, section 5.6. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + * + * Internal: + * xHCI spec, page 32: there are USBH()_UAHC_HCSPARAMS1[MAXSLOTS]+1 doorbell registers. + */ +union bdk_usbhx_uahc_dbx +{ + uint32_t u; + struct bdk_usbhx_uahc_dbx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t dbstreamid : 16; /**< [ 31: 16](WO) Doorbell stream ID. */ + uint32_t reserved_8_15 : 8; + uint32_t dbtarget : 8; /**< [ 7: 0](WO) Doorbell target. */ +#else /* Word 0 - Little Endian */ + uint32_t dbtarget : 8; /**< [ 7: 0](WO) Doorbell target. */ + uint32_t reserved_8_15 : 8; + uint32_t dbstreamid : 16; /**< [ 31: 16](WO) Doorbell stream ID. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_dbx_s cn; */ +}; +typedef union bdk_usbhx_uahc_dbx bdk_usbhx_uahc_dbx_t; + +static inline uint64_t BDK_USBHX_UAHC_DBX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_DBX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b<=64))) + return 0x868000000480ll + 0x1000000000ll * ((a) & 0x1) + 4ll * ((b) & 0x7f); + __bdk_csr_fatal("USBHX_UAHC_DBX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_DBX(a,b) bdk_usbhx_uahc_dbx_t +#define bustype_BDK_USBHX_UAHC_DBX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_DBX(a,b) "USBHX_UAHC_DBX" +#define device_bar_BDK_USBHX_UAHC_DBX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_DBX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_DBX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_dboff + * + * XHCI Doorbell Array Offset Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.3.7. + */ +union bdk_usbhx_uahc_dboff +{ + uint32_t u; + struct bdk_usbhx_uahc_dboff_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t dboff : 30; /**< [ 31: 2](RO) Doorbell array offset. */ + uint32_t reserved_0_1 : 2; +#else /* Word 0 - Little Endian */ + uint32_t reserved_0_1 : 2; + uint32_t dboff : 30; /**< [ 31: 2](RO) Doorbell array offset. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_dboff_s cn; */ +}; +typedef union bdk_usbhx_uahc_dboff bdk_usbhx_uahc_dboff_t; + +static inline uint64_t BDK_USBHX_UAHC_DBOFF(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_DBOFF(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000014ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_DBOFF", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_DBOFF(a) bdk_usbhx_uahc_dboff_t +#define bustype_BDK_USBHX_UAHC_DBOFF(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_DBOFF(a) "USBHX_UAHC_DBOFF" +#define device_bar_BDK_USBHX_UAHC_DBOFF(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_DBOFF(a) (a) +#define arguments_BDK_USBHX_UAHC_DBOFF(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uahc_dcbaap + * + * XHCI Device Context Base-Address-Array Pointer Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.6. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_dcbaap +{ + uint64_t u; + struct bdk_usbhx_uahc_dcbaap_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t dcbaap : 58; /**< [ 63: 6](R/W) Device context base address array pointer. */ + uint64_t reserved_0_5 : 6; +#else /* Word 0 - Little Endian */ + uint64_t reserved_0_5 : 6; + uint64_t dcbaap : 58; /**< [ 63: 6](R/W) Device context base address array pointer. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_dcbaap_s cn; */ +}; +typedef union bdk_usbhx_uahc_dcbaap bdk_usbhx_uahc_dcbaap_t; + +static inline uint64_t BDK_USBHX_UAHC_DCBAAP(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_DCBAAP(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000050ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_DCBAAP", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_DCBAAP(a) bdk_usbhx_uahc_dcbaap_t +#define bustype_BDK_USBHX_UAHC_DCBAAP(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UAHC_DCBAAP(a) "USBHX_UAHC_DCBAAP" +#define device_bar_BDK_USBHX_UAHC_DCBAAP(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_DCBAAP(a) (a) +#define arguments_BDK_USBHX_UAHC_DCBAAP(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_dnctrl + * + * XHCI Device Notification Control Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.4. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_dnctrl +{ + uint32_t u; + struct bdk_usbhx_uahc_dnctrl_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_16_31 : 16; + uint32_t n : 16; /**< [ 15: 0](R/W) Notification enable. */ +#else /* Word 0 - Little Endian */ + uint32_t n : 16; /**< [ 15: 0](R/W) Notification enable. */ + uint32_t reserved_16_31 : 16; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_dnctrl_s cn; */ +}; +typedef union bdk_usbhx_uahc_dnctrl bdk_usbhx_uahc_dnctrl_t; + +static inline uint64_t BDK_USBHX_UAHC_DNCTRL(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_DNCTRL(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000034ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_DNCTRL", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_DNCTRL(a) bdk_usbhx_uahc_dnctrl_t +#define bustype_BDK_USBHX_UAHC_DNCTRL(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_DNCTRL(a) "USBHX_UAHC_DNCTRL" +#define device_bar_BDK_USBHX_UAHC_DNCTRL(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_DNCTRL(a) (a) +#define arguments_BDK_USBHX_UAHC_DNCTRL(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uahc_erdp# + * + * XHCI Event Ring Dequeue Pointer Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.5.2.3.3. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_erdpx +{ + uint64_t u; + struct bdk_usbhx_uahc_erdpx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t erdp : 60; /**< [ 63: 4](R/W) Event ring dequeue pointer bits \<63:4\>. */ + uint64_t ehb : 1; /**< [ 3: 3](R/W1C/H) Event handler busy */ + uint64_t desi : 3; /**< [ 2: 0](R/W) Dequeue ERST segment index. */ +#else /* Word 0 - Little Endian */ + uint64_t desi : 3; /**< [ 2: 0](R/W) Dequeue ERST segment index. */ + uint64_t ehb : 1; /**< [ 3: 3](R/W1C/H) Event handler busy */ + uint64_t erdp : 60; /**< [ 63: 4](R/W) Event ring dequeue pointer bits \<63:4\>. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_erdpx_s cn; */ +}; +typedef union bdk_usbhx_uahc_erdpx bdk_usbhx_uahc_erdpx_t; + +static inline uint64_t BDK_USBHX_UAHC_ERDPX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_ERDPX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x868000000478ll + 0x1000000000ll * ((a) & 0x1) + 0ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UAHC_ERDPX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_ERDPX(a,b) bdk_usbhx_uahc_erdpx_t +#define bustype_BDK_USBHX_UAHC_ERDPX(a,b) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UAHC_ERDPX(a,b) "USBHX_UAHC_ERDPX" +#define device_bar_BDK_USBHX_UAHC_ERDPX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_ERDPX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_ERDPX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB) usbh#_uahc_erstba# + * + * XHCI Event-Ring Segment-Table Base-Address Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.5.2.3.2. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_erstbax +{ + uint64_t u; + struct bdk_usbhx_uahc_erstbax_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t erstba : 58; /**< [ 63: 6](R/W) Event-ring segment-table base-address bits\<63:6\>. */ + uint64_t reserved_0_5 : 6; +#else /* Word 0 - Little Endian */ + uint64_t reserved_0_5 : 6; + uint64_t erstba : 58; /**< [ 63: 6](R/W) Event-ring segment-table base-address bits\<63:6\>. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_erstbax_s cn; */ +}; +typedef union bdk_usbhx_uahc_erstbax bdk_usbhx_uahc_erstbax_t; + +static inline uint64_t BDK_USBHX_UAHC_ERSTBAX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_ERSTBAX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x868000000470ll + 0x1000000000ll * ((a) & 0x1) + 0ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UAHC_ERSTBAX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_ERSTBAX(a,b) bdk_usbhx_uahc_erstbax_t +#define bustype_BDK_USBHX_UAHC_ERSTBAX(a,b) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UAHC_ERSTBAX(a,b) "USBHX_UAHC_ERSTBAX" +#define device_bar_BDK_USBHX_UAHC_ERSTBAX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_ERSTBAX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_ERSTBAX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_erstsz# + * + * XHCI Event-Ring Segment-Table Size Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.5.2.3.1. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_erstszx +{ + uint32_t u; + struct bdk_usbhx_uahc_erstszx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_16_31 : 16; + uint32_t erstsz : 16; /**< [ 15: 0](R/W) Event-ring segment-table size. */ +#else /* Word 0 - Little Endian */ + uint32_t erstsz : 16; /**< [ 15: 0](R/W) Event-ring segment-table size. */ + uint32_t reserved_16_31 : 16; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_erstszx_s cn; */ +}; +typedef union bdk_usbhx_uahc_erstszx bdk_usbhx_uahc_erstszx_t; + +static inline uint64_t BDK_USBHX_UAHC_ERSTSZX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_ERSTSZX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x868000000468ll + 0x1000000000ll * ((a) & 0x1) + 0ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UAHC_ERSTSZX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_ERSTSZX(a,b) bdk_usbhx_uahc_erstszx_t +#define bustype_BDK_USBHX_UAHC_ERSTSZX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_ERSTSZX(a,b) "USBHX_UAHC_ERSTSZX" +#define device_bar_BDK_USBHX_UAHC_ERSTSZX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_ERSTSZX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_ERSTSZX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB) usbh#_uahc_gbuserraddr + * + * UAHC Bus-Error-Address Register + * When the AXI master bus returns error response, the SoC bus error is generated. In the host + * mode, the host_system_err port indicates this condition. In addition, it is also indicated in + * USBH()_UAHC_USBSTS[HSE]. Due to the nature of AXI, it is possible that multiple AXI + * transactions + * are active at a time. The host controller does not keep track of the start address of all + * outstanding transactions. Instead, it keeps track of the start address of the DMA transfer + * associated with all active transactions. It is this address that is reported in + * USBH()_UAHC_GBUSERRADDR when a bus error occurs. For example, if the host controller initiates + * a DMA + * transfer to write 1 k of packet data starting at buffer address 0xABCD0000, and this DMA is + * broken up into multiple 256 B bursts on the AXI, then if a bus error occurs on any of these + * associated AXI transfers, USBH()_UAHC_GBUSERRADDR reflects the DMA start address of 0xABCD0000 + * regardless of which AXI transaction received the error. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.12. + */ +union bdk_usbhx_uahc_gbuserraddr +{ + uint64_t u; + struct bdk_usbhx_uahc_gbuserraddr_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t busaddr : 64; /**< [ 63: 0](RO/H) Bus address. Contains the first bus address that encountered an SoC bus error. It is valid + when the USBH()_UAHC_GSTS[BUSERRADDRVLD] = 1. It can only be cleared by resetting the + core. */ +#else /* Word 0 - Little Endian */ + uint64_t busaddr : 64; /**< [ 63: 0](RO/H) Bus address. Contains the first bus address that encountered an SoC bus error. It is valid + when the USBH()_UAHC_GSTS[BUSERRADDRVLD] = 1. It can only be cleared by resetting the + core. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gbuserraddr_s cn; */ +}; +typedef union bdk_usbhx_uahc_gbuserraddr bdk_usbhx_uahc_gbuserraddr_t; + +static inline uint64_t BDK_USBHX_UAHC_GBUSERRADDR(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GBUSERRADDR(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c130ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GBUSERRADDR", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GBUSERRADDR(a) bdk_usbhx_uahc_gbuserraddr_t +#define bustype_BDK_USBHX_UAHC_GBUSERRADDR(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UAHC_GBUSERRADDR(a) "USBHX_UAHC_GBUSERRADDR" +#define device_bar_BDK_USBHX_UAHC_GBUSERRADDR(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GBUSERRADDR(a) (a) +#define arguments_BDK_USBHX_UAHC_GBUSERRADDR(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gctl + * + * UAHC Control Register + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.5. + */ +union bdk_usbhx_uahc_gctl +{ + uint32_t u; + struct bdk_usbhx_uahc_gctl_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t pwrdnscale : 13; /**< [ 31: 19](R/W) Power down scale. The USB3 suspend-clock input replaces pipe3_rx_pclk as a clock source to + a small part of the USB3 core that operates when the SuperSpeed PHY is in its lowest power + (P3) state, and therefore does not provide a clock. This field specifies how many suspend- + clock periods fit into a 16 kHz clock period. When performing the division, round up the + remainder. + + For example, when using an 32-bit PHY and 25-MHz suspend clock, PWRDNSCALE = 25000 kHz/16 + kHz = 1563 (rounded up). + + The minimum suspend-clock frequency is 32 KHz, and maximum suspend-clock frequency is 125 + MHz. + + The LTSSM uses suspend clock for 12-ms and 100-ms timers during suspend mode. According to + the USB 3.0 specification, the accuracy on these timers is 0% to +50%. 12 ms + 0~+50% + accuracy = 18 ms (Range is 12 ms - 18 ms) + 100 ms + 0~+50% accuracy = 150 ms (Range is 100 ms - 150 ms). + + The suspend clock accuracy requirement is: + _ (12,000/62.5) * (GCTL[31:19]) * actual suspend_clk_period should be between 12,000 and + 18,000 + _ (100,000/62.5) * (GCTL[31:19]) * actual suspend_clk_period should be between 100,000 and + 150,000 + + For example, if your suspend_clk frequency varies from 7.5 MHz to 10.5 MHz, then the value + needs to programmed is: power down scale = 10500/16 = 657 (rounded up; and fastest + frequency used). */ + uint32_t masterfiltbypass : 1; /**< [ 18: 18](R/W) Master filter bypass. Not relevant for Cavium's configuration. */ + uint32_t reserved_16_17 : 2; + uint32_t frmscldwn : 2; /**< [ 15: 14](R/W) Frame scale down. Scales down device view of a SOF/USOF/ITP duration. + For SuperSpeed/high-speed mode: + 0x0 = Interval is 125 us. + 0x1 = Interval is 62.5 us. + 0x2 = Interval is 31.25 us. + 0x3 = Interval is 15.625 us. + + For full speed mode, the scale down value is multiplied by 8. */ + uint32_t prtcapdir : 2; /**< [ 13: 12](R/W) Port capability direction. Always keep set to 0x1. */ + uint32_t coresoftreset : 1; /**< [ 11: 11](R/W) Core soft reset: 1 = soft reset to core, 0 = no soft reset. + Clears the interrupts and all the USBH()_UAHC_* CSRs except the + following registers: USBH()_UAHC_GCTL, USBH()_UAHC_GUCTL, USBH()_UAHC_GSTS, + USBH()_UAHC_GRLSID, USBH()_UAHC_GGPIO, USBH()_UAHC_GUID, USBH()_UAHC_GUSB2PHYCFG(), + USBH()_UAHC_GUSB3PIPECTL(). + + When you reset PHYs (using USBH()_UAHC_GUSB2PHYCFG() or USBH()_UAHC_GUSB3PIPECTL()), you + must keep the + core in reset state until PHY clocks are stable. This controls the bus, RAM, and MAC + domain resets. + + Internal: + Refer to Reset Generation on Synopsys Databook page 250. + Under soft reset, accesses to USBH()_UAHC_* CSRs other than USBH()_UAHC_GCTL may fail + (timeout). + This bit is for debug purposes only. Use USBH()_UAHC_USBCMD[HCRST] for soft reset. */ + uint32_t sofitpsync : 1; /**< [ 10: 10](R/W) Synchronize ITP to reference clock. In host mode, if this bit is set to: + 0 = The core keeps the UTMI/ULPI PHY on the first port in non-suspended state whenever + there is a SuperSpeed port that is not in Rx.Detect, SS.Disable, and U3 state. + 1 = The core keeps the UTMI/ULPI PHY on the first port in non-suspended state whenever the + other non-SuperSpeed ports are not in suspended state. + + This feature is useful because it saves power by suspending UTMI/ULPI when SuperSpeed only + is active and it helps resolve when the PHY does not transmit a host resume unless it is + placed in suspend state. + USBH()_UAHC_GUSB2PHYCFG()[SUSPHY] eventually decides to put the UTMI/ULPI PHY in to + suspend + state. In addition, when this bit is set to 1, the core generates ITP off of the REF_CLK- + based counter. Otherwise, ITP and SOF are generated off of UTMI/ULPI_CLK[0] based counter. + + To program the reference clock period inside the core, refer to + USBH()_UAHC_GUCTL[REFCLKPER]. + + If you do not plan to ever use this feature or the + USBH()_UAHC_GFLADJ[GFLADJ_REFCLK_LPM_SEL] + feature, the minimum frequency for the ref_clk can be as low as 32 KHz. You can connect + the + SUSPEND_CLK (as low as 32 KHz) to REF_CLK. + + If you plan to enable hardware-based LPM (PORTPMSC[HLE] = 1), this feature cannot be used. + Turn off this feature by setting this bit to zero and use the + USBH()_UAHC_GFLADJ[GFLADJ_REFCLK_LPM_SEL] feature. + + If you set this bit to 1, the USBH()_UAHC_GUSB2PHYCFG() [U2_FREECLK_EXISTS] bit + must be set to 0. */ + uint32_t u1u2timerscale : 1; /**< [ 9: 9](R/W) Disable U1/U2 timer scaledown. If set to 1, along with SCALEDOWN = 0x1, disables the scale + down of U1/U2 inactive timer values. + This is for simulation mode only. */ + uint32_t debugattach : 1; /**< [ 8: 8](R/W) Debug attach. When this bit is set: + * SuperSpeed link proceeds directly to the polling-link state (USBH()_UAHC_DCTL[RS] = 1) + without checking remote termination. + * Link LFPS polling timeout is infinite. + * Polling timeout during TS1 is infinite (in case link is waiting for TXEQ to finish). */ + uint32_t ramclksel : 2; /**< [ 7: 6](R/W) RAM clock select. Always keep set to 0x0. */ + uint32_t scaledown : 2; /**< [ 5: 4](R/W) Scale-down mode. When scale-down mode is enabled for simulation, the core uses scaled-down + timing values, resulting in faster simulations. When scale-down mode is disabled, actual + timing values are used. This is required for hardware operation. + + High-speed/full-speed/low-speed modes: + 0x0 = Disables all scale-downs. Actual timing values are used. + 0x1 = Enables scale-down of all timing values. These include: + * Speed enumeration. + * HNP/SRP. + * Suspend and resume. + + 0x2 = N/A. + 0x3 = Enables bits \<0\> and \<1\> scale-down timing values. + + SuperSpeed mode: + 0x0 = Disables all scale-downs. Actual timing values are used. + 0x1 = Enables scaled down SuperSpeed timing and repeat values including: + * Number of TxEq training sequences reduce to eight. + * LFPS polling burst time reduce to 100 ns. + * LFPS warm reset receive reduce to 30 us. + + Internal: + Refer to the rtl_vip_scaledown_mapping.xls file under \<workspace\>/sim/SoC_sim + directory for the complete list. + 0x2 = No TxEq training sequences are sent. Overrides bit\<4\>. + 0x3 = Enables bits\<0\> and \<1\> scale-down timing values. */ + uint32_t disscramble : 1; /**< [ 3: 3](R/W) Disable scrambling. Transmit request to link partner on next transition to recovery or polling. */ + uint32_t u2exit_lfps : 1; /**< [ 2: 2](R/W) LFPS U2 exit. + 0 = The link treats 248 ns LFPS as a valid U2 exit. + 1 = The link waits for 8 us of LFPS before it detects a valid U2 exit. + + This bit is added to improve interoperability with a third party host controller. This + host controller in U2 state while performing receiver detection generates an LFPS glitch + of about 4s duration. This causes the device to exit from U2 state because the LFPS filter + value is 248 ns. With the new functionality enabled, the device can stay in U2 while + ignoring this glitch from the host controller. */ + uint32_t reserved_1 : 1; + uint32_t dsblclkgtng : 1; /**< [ 0: 0](R/W) Disable clock gating. When set to 1 and the core is in low power mode, internal clock + gating is disabled, which means the clocks are always running. This bit can be set to 1 + after power-up reset. */ +#else /* Word 0 - Little Endian */ + uint32_t dsblclkgtng : 1; /**< [ 0: 0](R/W) Disable clock gating. When set to 1 and the core is in low power mode, internal clock + gating is disabled, which means the clocks are always running. This bit can be set to 1 + after power-up reset. */ + uint32_t reserved_1 : 1; + uint32_t u2exit_lfps : 1; /**< [ 2: 2](R/W) LFPS U2 exit. + 0 = The link treats 248 ns LFPS as a valid U2 exit. + 1 = The link waits for 8 us of LFPS before it detects a valid U2 exit. + + This bit is added to improve interoperability with a third party host controller. This + host controller in U2 state while performing receiver detection generates an LFPS glitch + of about 4s duration. This causes the device to exit from U2 state because the LFPS filter + value is 248 ns. With the new functionality enabled, the device can stay in U2 while + ignoring this glitch from the host controller. */ + uint32_t disscramble : 1; /**< [ 3: 3](R/W) Disable scrambling. Transmit request to link partner on next transition to recovery or polling. */ + uint32_t scaledown : 2; /**< [ 5: 4](R/W) Scale-down mode. When scale-down mode is enabled for simulation, the core uses scaled-down + timing values, resulting in faster simulations. When scale-down mode is disabled, actual + timing values are used. This is required for hardware operation. + + High-speed/full-speed/low-speed modes: + 0x0 = Disables all scale-downs. Actual timing values are used. + 0x1 = Enables scale-down of all timing values. These include: + * Speed enumeration. + * HNP/SRP. + * Suspend and resume. + + 0x2 = N/A. + 0x3 = Enables bits \<0\> and \<1\> scale-down timing values. + + SuperSpeed mode: + 0x0 = Disables all scale-downs. Actual timing values are used. + 0x1 = Enables scaled down SuperSpeed timing and repeat values including: + * Number of TxEq training sequences reduce to eight. + * LFPS polling burst time reduce to 100 ns. + * LFPS warm reset receive reduce to 30 us. + + Internal: + Refer to the rtl_vip_scaledown_mapping.xls file under \<workspace\>/sim/SoC_sim + directory for the complete list. + 0x2 = No TxEq training sequences are sent. Overrides bit\<4\>. + 0x3 = Enables bits\<0\> and \<1\> scale-down timing values. */ + uint32_t ramclksel : 2; /**< [ 7: 6](R/W) RAM clock select. Always keep set to 0x0. */ + uint32_t debugattach : 1; /**< [ 8: 8](R/W) Debug attach. When this bit is set: + * SuperSpeed link proceeds directly to the polling-link state (USBH()_UAHC_DCTL[RS] = 1) + without checking remote termination. + * Link LFPS polling timeout is infinite. + * Polling timeout during TS1 is infinite (in case link is waiting for TXEQ to finish). */ + uint32_t u1u2timerscale : 1; /**< [ 9: 9](R/W) Disable U1/U2 timer scaledown. If set to 1, along with SCALEDOWN = 0x1, disables the scale + down of U1/U2 inactive timer values. + This is for simulation mode only. */ + uint32_t sofitpsync : 1; /**< [ 10: 10](R/W) Synchronize ITP to reference clock. In host mode, if this bit is set to: + 0 = The core keeps the UTMI/ULPI PHY on the first port in non-suspended state whenever + there is a SuperSpeed port that is not in Rx.Detect, SS.Disable, and U3 state. + 1 = The core keeps the UTMI/ULPI PHY on the first port in non-suspended state whenever the + other non-SuperSpeed ports are not in suspended state. + + This feature is useful because it saves power by suspending UTMI/ULPI when SuperSpeed only + is active and it helps resolve when the PHY does not transmit a host resume unless it is + placed in suspend state. + USBH()_UAHC_GUSB2PHYCFG()[SUSPHY] eventually decides to put the UTMI/ULPI PHY in to + suspend + state. In addition, when this bit is set to 1, the core generates ITP off of the REF_CLK- + based counter. Otherwise, ITP and SOF are generated off of UTMI/ULPI_CLK[0] based counter. + + To program the reference clock period inside the core, refer to + USBH()_UAHC_GUCTL[REFCLKPER]. + + If you do not plan to ever use this feature or the + USBH()_UAHC_GFLADJ[GFLADJ_REFCLK_LPM_SEL] + feature, the minimum frequency for the ref_clk can be as low as 32 KHz. You can connect + the + SUSPEND_CLK (as low as 32 KHz) to REF_CLK. + + If you plan to enable hardware-based LPM (PORTPMSC[HLE] = 1), this feature cannot be used. + Turn off this feature by setting this bit to zero and use the + USBH()_UAHC_GFLADJ[GFLADJ_REFCLK_LPM_SEL] feature. + + If you set this bit to 1, the USBH()_UAHC_GUSB2PHYCFG() [U2_FREECLK_EXISTS] bit + must be set to 0. */ + uint32_t coresoftreset : 1; /**< [ 11: 11](R/W) Core soft reset: 1 = soft reset to core, 0 = no soft reset. + Clears the interrupts and all the USBH()_UAHC_* CSRs except the + following registers: USBH()_UAHC_GCTL, USBH()_UAHC_GUCTL, USBH()_UAHC_GSTS, + USBH()_UAHC_GRLSID, USBH()_UAHC_GGPIO, USBH()_UAHC_GUID, USBH()_UAHC_GUSB2PHYCFG(), + USBH()_UAHC_GUSB3PIPECTL(). + + When you reset PHYs (using USBH()_UAHC_GUSB2PHYCFG() or USBH()_UAHC_GUSB3PIPECTL()), you + must keep the + core in reset state until PHY clocks are stable. This controls the bus, RAM, and MAC + domain resets. + + Internal: + Refer to Reset Generation on Synopsys Databook page 250. + Under soft reset, accesses to USBH()_UAHC_* CSRs other than USBH()_UAHC_GCTL may fail + (timeout). + This bit is for debug purposes only. Use USBH()_UAHC_USBCMD[HCRST] for soft reset. */ + uint32_t prtcapdir : 2; /**< [ 13: 12](R/W) Port capability direction. Always keep set to 0x1. */ + uint32_t frmscldwn : 2; /**< [ 15: 14](R/W) Frame scale down. Scales down device view of a SOF/USOF/ITP duration. + For SuperSpeed/high-speed mode: + 0x0 = Interval is 125 us. + 0x1 = Interval is 62.5 us. + 0x2 = Interval is 31.25 us. + 0x3 = Interval is 15.625 us. + + For full speed mode, the scale down value is multiplied by 8. */ + uint32_t reserved_16_17 : 2; + uint32_t masterfiltbypass : 1; /**< [ 18: 18](R/W) Master filter bypass. Not relevant for Cavium's configuration. */ + uint32_t pwrdnscale : 13; /**< [ 31: 19](R/W) Power down scale. The USB3 suspend-clock input replaces pipe3_rx_pclk as a clock source to + a small part of the USB3 core that operates when the SuperSpeed PHY is in its lowest power + (P3) state, and therefore does not provide a clock. This field specifies how many suspend- + clock periods fit into a 16 kHz clock period. When performing the division, round up the + remainder. + + For example, when using an 32-bit PHY and 25-MHz suspend clock, PWRDNSCALE = 25000 kHz/16 + kHz = 1563 (rounded up). + + The minimum suspend-clock frequency is 32 KHz, and maximum suspend-clock frequency is 125 + MHz. + + The LTSSM uses suspend clock for 12-ms and 100-ms timers during suspend mode. According to + the USB 3.0 specification, the accuracy on these timers is 0% to +50%. 12 ms + 0~+50% + accuracy = 18 ms (Range is 12 ms - 18 ms) + 100 ms + 0~+50% accuracy = 150 ms (Range is 100 ms - 150 ms). + + The suspend clock accuracy requirement is: + _ (12,000/62.5) * (GCTL[31:19]) * actual suspend_clk_period should be between 12,000 and + 18,000 + _ (100,000/62.5) * (GCTL[31:19]) * actual suspend_clk_period should be between 100,000 and + 150,000 + + For example, if your suspend_clk frequency varies from 7.5 MHz to 10.5 MHz, then the value + needs to programmed is: power down scale = 10500/16 = 657 (rounded up; and fastest + frequency used). */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gctl_s cn; */ +}; +typedef union bdk_usbhx_uahc_gctl bdk_usbhx_uahc_gctl_t; + +static inline uint64_t BDK_USBHX_UAHC_GCTL(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GCTL(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c110ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GCTL", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GCTL(a) bdk_usbhx_uahc_gctl_t +#define bustype_BDK_USBHX_UAHC_GCTL(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GCTL(a) "USBHX_UAHC_GCTL" +#define device_bar_BDK_USBHX_UAHC_GCTL(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GCTL(a) (a) +#define arguments_BDK_USBHX_UAHC_GCTL(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gdbgbmu + * + * UAHC BMU Debug Register + * See description in USBH()_UAHC_GDBGFIFOSPACE. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.4.5. + */ +union bdk_usbhx_uahc_gdbgbmu +{ + uint32_t u; + struct bdk_usbhx_uahc_gdbgbmu_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t bmu_bcu_dbg : 24; /**< [ 31: 8](RO/H) BMU_BCU debug information. */ + uint32_t bmu_dcu_dbg : 4; /**< [ 7: 4](RO/H) BMU_DCU debug information. */ + uint32_t bmu_ccu_dbg : 4; /**< [ 3: 0](RO/H) BMU_CCU debug information. */ +#else /* Word 0 - Little Endian */ + uint32_t bmu_ccu_dbg : 4; /**< [ 3: 0](RO/H) BMU_CCU debug information. */ + uint32_t bmu_dcu_dbg : 4; /**< [ 7: 4](RO/H) BMU_DCU debug information. */ + uint32_t bmu_bcu_dbg : 24; /**< [ 31: 8](RO/H) BMU_BCU debug information. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gdbgbmu_s cn; */ +}; +typedef union bdk_usbhx_uahc_gdbgbmu bdk_usbhx_uahc_gdbgbmu_t; + +static inline uint64_t BDK_USBHX_UAHC_GDBGBMU(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GDBGBMU(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c16cll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GDBGBMU", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GDBGBMU(a) bdk_usbhx_uahc_gdbgbmu_t +#define bustype_BDK_USBHX_UAHC_GDBGBMU(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GDBGBMU(a) "USBHX_UAHC_GDBGBMU" +#define device_bar_BDK_USBHX_UAHC_GDBGBMU(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GDBGBMU(a) (a) +#define arguments_BDK_USBHX_UAHC_GDBGBMU(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uahc_gdbgepinfo + * + * UAHC Endpoint Information Debug Register + * See description in USBH()_UAHC_GDBGFIFOSPACE. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + */ +union bdk_usbhx_uahc_gdbgepinfo +{ + uint64_t u; + struct bdk_usbhx_uahc_gdbgepinfo_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t endpt_dbg : 64; /**< [ 63: 0](RO/H) Endpoint debug information. */ +#else /* Word 0 - Little Endian */ + uint64_t endpt_dbg : 64; /**< [ 63: 0](RO/H) Endpoint debug information. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gdbgepinfo_s cn; */ +}; +typedef union bdk_usbhx_uahc_gdbgepinfo bdk_usbhx_uahc_gdbgepinfo_t; + +static inline uint64_t BDK_USBHX_UAHC_GDBGEPINFO(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GDBGEPINFO(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c178ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GDBGEPINFO", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GDBGEPINFO(a) bdk_usbhx_uahc_gdbgepinfo_t +#define bustype_BDK_USBHX_UAHC_GDBGEPINFO(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UAHC_GDBGEPINFO(a) "USBHX_UAHC_GDBGEPINFO" +#define device_bar_BDK_USBHX_UAHC_GDBGEPINFO(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GDBGEPINFO(a) (a) +#define arguments_BDK_USBHX_UAHC_GDBGEPINFO(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gdbgfifospace + * + * UAHC Debug FIFO Space Available Register + * This register is for debug purposes. It provides debug information on the internal status and + * state machines. Global debug registers have design-specific information, and are used by state + * machines. Global debug registers have design-specific information, and are used for debugging + * purposes. These registers are not intended to be used by the customer. If any debug assistance + * is needed for the silicon, contact customer support with a dump of these registers. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.4.2. + * INTERNAL: Contact Synopsys directly. + */ +union bdk_usbhx_uahc_gdbgfifospace +{ + uint32_t u; + struct bdk_usbhx_uahc_gdbgfifospace_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t spaceavailable : 16; /**< [ 31: 16](RO/H) Space available in the selected FIFO. */ + uint32_t reserved_9_15 : 7; + uint32_t select : 9; /**< [ 8: 0](R/W) FIFO/queue select/port-select. + FIFO/queue select: \<7:5\> indicates the FIFO/queue type; \<4:0\> indicates the FIFO/queue + number. + For example, 0x21 refers to RxFIFO_1, and 0x5E refers to TxReqQ_30. + 0x1F-0x0: TxFIFO_31 to TxFIFO_0. + 0x3F-0x20: RxFIFO_31 to RxFIFO_0. + 0x5F-0x40: TxReqQ_31 to TxReqQ_0. + 0x7F-0x60: RxReqQ_31 to RxReqQ_0. + 0x9F-0x80: RxInfoQ_31 to RxInfoQ_0. + 0xA0: DescFetchQ. + 0xA1: EventQ. + 0xA2: ProtocolStatusQ. + + Port-select: \<3:0\> selects the port-number when accessing USBH()_UAHC_GDBGLTSSM. */ +#else /* Word 0 - Little Endian */ + uint32_t select : 9; /**< [ 8: 0](R/W) FIFO/queue select/port-select. + FIFO/queue select: \<7:5\> indicates the FIFO/queue type; \<4:0\> indicates the FIFO/queue + number. + For example, 0x21 refers to RxFIFO_1, and 0x5E refers to TxReqQ_30. + 0x1F-0x0: TxFIFO_31 to TxFIFO_0. + 0x3F-0x20: RxFIFO_31 to RxFIFO_0. + 0x5F-0x40: TxReqQ_31 to TxReqQ_0. + 0x7F-0x60: RxReqQ_31 to RxReqQ_0. + 0x9F-0x80: RxInfoQ_31 to RxInfoQ_0. + 0xA0: DescFetchQ. + 0xA1: EventQ. + 0xA2: ProtocolStatusQ. + + Port-select: \<3:0\> selects the port-number when accessing USBH()_UAHC_GDBGLTSSM. */ + uint32_t reserved_9_15 : 7; + uint32_t spaceavailable : 16; /**< [ 31: 16](RO/H) Space available in the selected FIFO. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gdbgfifospace_s cn; */ +}; +typedef union bdk_usbhx_uahc_gdbgfifospace bdk_usbhx_uahc_gdbgfifospace_t; + +static inline uint64_t BDK_USBHX_UAHC_GDBGFIFOSPACE(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GDBGFIFOSPACE(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c160ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GDBGFIFOSPACE", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GDBGFIFOSPACE(a) bdk_usbhx_uahc_gdbgfifospace_t +#define bustype_BDK_USBHX_UAHC_GDBGFIFOSPACE(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GDBGFIFOSPACE(a) "USBHX_UAHC_GDBGFIFOSPACE" +#define device_bar_BDK_USBHX_UAHC_GDBGFIFOSPACE(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GDBGFIFOSPACE(a) (a) +#define arguments_BDK_USBHX_UAHC_GDBGFIFOSPACE(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gdbglnmcc + * + * UAHC LNMCC Debug Register + * See description in USBH()_UAHC_GDBGFIFOSPACE. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.4.4. + */ +union bdk_usbhx_uahc_gdbglnmcc +{ + uint32_t u; + struct bdk_usbhx_uahc_gdbglnmcc_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_9_31 : 23; + uint32_t lnmcc_berc : 9; /**< [ 8: 0](RO/H) This field indicates the bit-error-rate information for the port selected in + USBH()_UAHC_GDBGFIFOSPACE[SELECT] (port-select). + This field is for debug purposes only. */ +#else /* Word 0 - Little Endian */ + uint32_t lnmcc_berc : 9; /**< [ 8: 0](RO/H) This field indicates the bit-error-rate information for the port selected in + USBH()_UAHC_GDBGFIFOSPACE[SELECT] (port-select). + This field is for debug purposes only. */ + uint32_t reserved_9_31 : 23; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gdbglnmcc_s cn; */ +}; +typedef union bdk_usbhx_uahc_gdbglnmcc bdk_usbhx_uahc_gdbglnmcc_t; + +static inline uint64_t BDK_USBHX_UAHC_GDBGLNMCC(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GDBGLNMCC(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c168ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GDBGLNMCC", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GDBGLNMCC(a) bdk_usbhx_uahc_gdbglnmcc_t +#define bustype_BDK_USBHX_UAHC_GDBGLNMCC(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GDBGLNMCC(a) "USBHX_UAHC_GDBGLNMCC" +#define device_bar_BDK_USBHX_UAHC_GDBGLNMCC(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GDBGLNMCC(a) (a) +#define arguments_BDK_USBHX_UAHC_GDBGLNMCC(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gdbglsp + * + * UAHC LSP Debug Register + * See description in USBH()_UAHC_GDBGFIFOSPACE. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + */ +union bdk_usbhx_uahc_gdbglsp +{ + uint32_t u; + struct bdk_usbhx_uahc_gdbglsp_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t lsp_dbg : 32; /**< [ 31: 0](RO/H) LSP debug information. */ +#else /* Word 0 - Little Endian */ + uint32_t lsp_dbg : 32; /**< [ 31: 0](RO/H) LSP debug information. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gdbglsp_s cn; */ +}; +typedef union bdk_usbhx_uahc_gdbglsp bdk_usbhx_uahc_gdbglsp_t; + +static inline uint64_t BDK_USBHX_UAHC_GDBGLSP(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GDBGLSP(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c174ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GDBGLSP", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GDBGLSP(a) bdk_usbhx_uahc_gdbglsp_t +#define bustype_BDK_USBHX_UAHC_GDBGLSP(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GDBGLSP(a) "USBHX_UAHC_GDBGLSP" +#define device_bar_BDK_USBHX_UAHC_GDBGLSP(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GDBGLSP(a) (a) +#define arguments_BDK_USBHX_UAHC_GDBGLSP(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gdbglspmux + * + * UAHC LSP Multiplexer Debug Register + * See description in USBH()_UAHC_GDBGFIFOSPACE. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.4.6. + * INTERNAL: This register is for Synopsys internal use only. + */ +union bdk_usbhx_uahc_gdbglspmux +{ + uint32_t u; + struct bdk_usbhx_uahc_gdbglspmux_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_24_31 : 8; + uint32_t latraceportmuxselect : 8; /**< [ 23: 16](R/W) logic_analyzer_trace port multiplexer select. Only bits\<21:16\> are used. For details on + how the mux controls the debug traces, refer to the Verilog file. + A value of 0x3F drives 0s on the logic_analyzer_trace signal. If you plan to OR (instead + using a mux) this signal with other trace signals in your system to generate a common + trace signal, you can use this feature. */ + uint32_t endbc : 1; /**< [ 15: 15](R/W) Enable debugging of the debug capability LSP. Use HOSTSELECT to select the DbC LSP debug + information presented in the GDBGLSP register. + + Internal: + Note this can only be used if DebugCapabaility was enabled at compile. */ + uint32_t reserved_14 : 1; + uint32_t hostselect : 14; /**< [ 13: 0](R/W) Host select. Selects the LSP debug information presented in USBH()_UAHC_GDBGLSP. */ +#else /* Word 0 - Little Endian */ + uint32_t hostselect : 14; /**< [ 13: 0](R/W) Host select. Selects the LSP debug information presented in USBH()_UAHC_GDBGLSP. */ + uint32_t reserved_14 : 1; + uint32_t endbc : 1; /**< [ 15: 15](R/W) Enable debugging of the debug capability LSP. Use HOSTSELECT to select the DbC LSP debug + information presented in the GDBGLSP register. + + Internal: + Note this can only be used if DebugCapabaility was enabled at compile. */ + uint32_t latraceportmuxselect : 8; /**< [ 23: 16](R/W) logic_analyzer_trace port multiplexer select. Only bits\<21:16\> are used. For details on + how the mux controls the debug traces, refer to the Verilog file. + A value of 0x3F drives 0s on the logic_analyzer_trace signal. If you plan to OR (instead + using a mux) this signal with other trace signals in your system to generate a common + trace signal, you can use this feature. */ + uint32_t reserved_24_31 : 8; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gdbglspmux_s cn; */ +}; +typedef union bdk_usbhx_uahc_gdbglspmux bdk_usbhx_uahc_gdbglspmux_t; + +static inline uint64_t BDK_USBHX_UAHC_GDBGLSPMUX(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GDBGLSPMUX(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c170ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GDBGLSPMUX", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GDBGLSPMUX(a) bdk_usbhx_uahc_gdbglspmux_t +#define bustype_BDK_USBHX_UAHC_GDBGLSPMUX(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GDBGLSPMUX(a) "USBHX_UAHC_GDBGLSPMUX" +#define device_bar_BDK_USBHX_UAHC_GDBGLSPMUX(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GDBGLSPMUX(a) (a) +#define arguments_BDK_USBHX_UAHC_GDBGLSPMUX(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gdbgltssm + * + * UAHC LTSSM Debug Register + * In multiport host configuration, the port number is defined by + * USBH()_UAHC_GDBGFIFOSPACE[SELECT]\<3:0\>. Value of this register may change immediately after + * reset. + * See description in USBH()_UAHC_GDBGFIFOSPACE. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.4.3. + */ +union bdk_usbhx_uahc_gdbgltssm +{ + uint32_t u; + struct bdk_usbhx_uahc_gdbgltssm_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_27_31 : 5; + uint32_t ltdbtimeout : 1; /**< [ 26: 26](RO/H) LTDB timeout. */ + uint32_t ltdblinkstate : 4; /**< [ 25: 22](RO/H) LTDB link state. */ + uint32_t ltdbsubstate : 4; /**< [ 21: 18](RO/H) LTDB substate. */ + uint32_t debugpipestatus : 18; /**< [ 17: 0](RO/H) Debug PIPE status. + _ \<17\> Elastic buffer mode. + _ \<16\> TX elec idle. + _ \<15\> RX polarity. + _ \<14\> TX Detect RX/loopback. + _ \<13:11\> LTSSM PHY command state. + _ 0x0 = PHY_IDLE (PHY command state is in IDLE. No PHY request is pending). + _ 0x1 = PHY_DET (Request to start receiver detection). + _ 0x2 = PHY_DET_3 (Wait for Phy_Status (receiver detection)). + _ 0x3 = PHY_PWR_DLY (delay Pipe3_PowerDown P0 -\> P1/P2/P3 request). + _ 0x4 = PHY_PWR_A (delay for internal logic). + _ 0x5 = PHY_PWR_B (wait for Phy_Status(Power-state change request)). + + _ \<10:9\> Power down. + _ \<8\> RxEq train. + _ \<7:6\> TX de-emphasis. + _ \<5:3\> LTSSM clock state. + _ 0x0 = CLK_NORM (PHY is in non-P3 state and PCLK is running). + _ 0x1 = CLK_TO_P3 (P3 entry request to PHY). + _ 0x2 = CLK_WAIT1 (wait for Phy_Status (P3 request)). + _ 0x3 = CLK_P3 (PHY is in P3 and PCLK is not running). + _ 0x4 = CLK_TO_P0 (P3 exit request to PHY). + _ 0x5 = CLK_WAIT2 (Wait for Phy_Status (P3 exit request)). + + _ \<2\> TX swing. + _ \<1\> RX termination. + _ \<0\> TX 1s/0s. */ +#else /* Word 0 - Little Endian */ + uint32_t debugpipestatus : 18; /**< [ 17: 0](RO/H) Debug PIPE status. + _ \<17\> Elastic buffer mode. + _ \<16\> TX elec idle. + _ \<15\> RX polarity. + _ \<14\> TX Detect RX/loopback. + _ \<13:11\> LTSSM PHY command state. + _ 0x0 = PHY_IDLE (PHY command state is in IDLE. No PHY request is pending). + _ 0x1 = PHY_DET (Request to start receiver detection). + _ 0x2 = PHY_DET_3 (Wait for Phy_Status (receiver detection)). + _ 0x3 = PHY_PWR_DLY (delay Pipe3_PowerDown P0 -\> P1/P2/P3 request). + _ 0x4 = PHY_PWR_A (delay for internal logic). + _ 0x5 = PHY_PWR_B (wait for Phy_Status(Power-state change request)). + + _ \<10:9\> Power down. + _ \<8\> RxEq train. + _ \<7:6\> TX de-emphasis. + _ \<5:3\> LTSSM clock state. + _ 0x0 = CLK_NORM (PHY is in non-P3 state and PCLK is running). + _ 0x1 = CLK_TO_P3 (P3 entry request to PHY). + _ 0x2 = CLK_WAIT1 (wait for Phy_Status (P3 request)). + _ 0x3 = CLK_P3 (PHY is in P3 and PCLK is not running). + _ 0x4 = CLK_TO_P0 (P3 exit request to PHY). + _ 0x5 = CLK_WAIT2 (Wait for Phy_Status (P3 exit request)). + + _ \<2\> TX swing. + _ \<1\> RX termination. + _ \<0\> TX 1s/0s. */ + uint32_t ltdbsubstate : 4; /**< [ 21: 18](RO/H) LTDB substate. */ + uint32_t ltdblinkstate : 4; /**< [ 25: 22](RO/H) LTDB link state. */ + uint32_t ltdbtimeout : 1; /**< [ 26: 26](RO/H) LTDB timeout. */ + uint32_t reserved_27_31 : 5; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gdbgltssm_s cn; */ +}; +typedef union bdk_usbhx_uahc_gdbgltssm bdk_usbhx_uahc_gdbgltssm_t; + +static inline uint64_t BDK_USBHX_UAHC_GDBGLTSSM(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GDBGLTSSM(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c164ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GDBGLTSSM", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GDBGLTSSM(a) bdk_usbhx_uahc_gdbgltssm_t +#define bustype_BDK_USBHX_UAHC_GDBGLTSSM(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GDBGLTSSM(a) "USBHX_UAHC_GDBGLTSSM" +#define device_bar_BDK_USBHX_UAHC_GDBGLTSSM(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GDBGLTSSM(a) (a) +#define arguments_BDK_USBHX_UAHC_GDBGLTSSM(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gdmahlratio + * + * UAHC DMA High/Low Ratio Register + * This register specifies the relative priority of the SuperSpeed FIFOs with respect to the + * high-speed/full-speed/low-speed FIFOs. The DMA arbiter prioritizes the high-speed/full-speed + * /low-speed round-robin arbiter group every DMA high-low priority ratio grants as indicated in + * the register separately for TX and RX. + * + * To illustrate, consider that all FIFOs are requesting access simultaneously, and the ratio is + * 4. SuperSpeed gets priority for four packets, high-speed/full-speed/low-speed gets priority + * for one packet, SuperSpeed gets priority for four packets, high-speed/full-speed/low-speed + * gets priority for one packet, and so on. + * + * If FIFOs from both speed groups are not requesting access simultaneously then: + * * If SuperSpeed got grants four out of the last four times, then high-speed/full-speed/ + * low-speed get the priority on any future request. + * * If high-speed/full-speed/low-speed got the grant last time, SuperSpeed gets the priority on + * the next request. + * + * If there is a valid request on either SuperSpeed or high-speed/full-speed/low-speed, a grant + * is always awarded; there is no idle. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.9.5. + */ +union bdk_usbhx_uahc_gdmahlratio +{ + uint32_t u; + struct bdk_usbhx_uahc_gdmahlratio_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_13_31 : 19; + uint32_t rx_ratio : 5; /**< [ 12: 8](R/W) Speed ratio for RX arbitration. */ + uint32_t reserved_5_7 : 3; + uint32_t tx_ratio : 5; /**< [ 4: 0](R/W) Speed ratio for TX arbitration. */ +#else /* Word 0 - Little Endian */ + uint32_t tx_ratio : 5; /**< [ 4: 0](R/W) Speed ratio for TX arbitration. */ + uint32_t reserved_5_7 : 3; + uint32_t rx_ratio : 5; /**< [ 12: 8](R/W) Speed ratio for RX arbitration. */ + uint32_t reserved_13_31 : 19; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gdmahlratio_s cn; */ +}; +typedef union bdk_usbhx_uahc_gdmahlratio bdk_usbhx_uahc_gdmahlratio_t; + +static inline uint64_t BDK_USBHX_UAHC_GDMAHLRATIO(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GDMAHLRATIO(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c624ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GDMAHLRATIO", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GDMAHLRATIO(a) bdk_usbhx_uahc_gdmahlratio_t +#define bustype_BDK_USBHX_UAHC_GDMAHLRATIO(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GDMAHLRATIO(a) "USBHX_UAHC_GDMAHLRATIO" +#define device_bar_BDK_USBHX_UAHC_GDMAHLRATIO(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GDMAHLRATIO(a) (a) +#define arguments_BDK_USBHX_UAHC_GDMAHLRATIO(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gfladj + * + * UAHC Global Frame Length Adjustment Register + * This register provides options for the software to control the core behavior with respect to + * SOF (start of frame) and ITP (isochronous timestamp packet) timers and frame timer + * functionality. It provides the option to override the sideband signal fladj_30mhz_reg. In + * addition, it enables running SOF or ITP frame timer counters completely off of the REF_CLK. + * This facilitates hardware LPM in host mode with the SOF or ITP counters being run off of the + * REF_CLK signal. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.9.6. + */ +union bdk_usbhx_uahc_gfladj +{ + uint32_t u; + struct bdk_usbhx_uahc_gfladj_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t gfladj_refclk_240mhzdecr_pls1 : 1;/**< [ 31: 31](R/W) This field indicates that the decrement value that the controller applies for each REF_CLK + must be GFLADJ_REFCLK_240MHZ_DECR and GFLADJ_REFCLK_240MHZ_DECR +1 alternatively on each + REF_CLK. Set this bit to 1 only if [GFLADJ_REFCLK_LPM_SEL] is set to 1 and the fractional + component of 240/ref_frequency is greater than or equal to 0.5. + + Example: + + If the REF_CLK is 19.2 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 52. + * [GFLADJ_REFCLK_240MHZ_DECR] = (240/19.2) = 12.5. + * [GFLADJ_REFCLK_240MHZDECR_PLS1] = 1. + + If the REF_CLK is 24 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 41. + * [GFLADJ_REFCLK_240MHZ_DECR] = (240/24) = 10. + * [GFLADJ_REFCLK_240MHZDECR_PLS1] = 0. */ + uint32_t gfladj_refclk_240mhz_decr : 7;/**< [ 30: 24](R/W) This field indicates the decrement value that the controller applies for each REF_CLK in + order to derive a frame timer in terms of a 240-MHz clock. This field must be programmed + to a nonzero value only if [GFLADJ_REFCLK_LPM_SEL] is set to 1. + + The value is derived as follows: + _ [GFLADJ_REFCLK_240MHZ_DECR] = 240/ref_clk_frequency + + Examples: + + If the REF_CLK is 24 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 41. + * [GFLADJ_REFCLK_240MHZ_DECR] = 240/24 = 10. + + If the REF_CLK is 48 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 20. + * [GFLADJ_REFCLK_240MHZ_DECR] = 240/48 = 5. + + If the REF_CLK is 17 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 58. + * [GFLADJ_REFCLK_240MHZ_DECR] = 240/17 = 14. */ + uint32_t gfladj_refclk_lpm_sel : 1; /**< [ 23: 23](R/W) This bit enables the functionality of running SOF/ITP counters on the REF_CLK. + This bit must not be set to 1 if USBH()_UAHC_GCTL[SOFITPSYNC] = 1. Similarly, if + [GFLADJ_REFCLK_LPM_SEL] = 1, USBH()_UAHC_GCTL[SOFITPSYNC] must not be set to 1. + When [GFLADJ_REFCLK_LPM_SEL] = 1 the overloading of the suspend control of the USB 2.0 + first + port PHY (UTMI) with USB 3.0 port states is removed. Note that the REF_CLK frequencies + supported in this mode are 16/17/19.2/20/24/39.7/40 MHz. + + Internal: + The utmi_clk[0] signal of the core must be connected to the FREECLK of the PHY. + If you set this bit to 1, USBH()_UAHC_GUSB2PHYCFG()[U2_FREECLK_EXISTS] must be set to 0. */ + uint32_t reserved_22 : 1; + uint32_t gfladj_refclk_fladj : 14; /**< [ 21: 8](R/W) This field indicates the frame length adjustment to be applied when SOF/ITP counter is + running off of the REF_CLK. This register value is used to adjust:. + * ITP interval when USBH()_UAHC_GCTL[SOFITPSYNC] = 1 + * both SOF and ITP interval when [GFLADJ_REFCLK_LPM_SEL] = 1. + + This field must be programmed to a nonzero value only if [GFLADJ_REFCLK_LPM_SEL] = 1 or + USBH()_UAHC_GCTL[SOFITPSYNC] = 1. + + The value is derived as below: + + _ FLADJ_REF_CLK_FLADJ = ((125000/ref_clk_period_integer) - (125000/ref_clk_period)) * + ref_clk_period + + where, + * the ref_clk_period_integer is the integer value of the REF_CLK period got by truncating + the decimal (fractional) value that is programmed in USBH()_UAHC_GUCTL[REFCLKPER]. + * the ref_clk_period is the REF_CLK period including the fractional value. + + Examples: + + If the REF_CLK is 24 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 41. + * GLADJ_REFCLK_FLADJ = ((125000/41) - + (125000/41.6666)) * 41.6666 = 2032 (ignoring the fractional value). + + If the REF_CLK is 48 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 20. + * GLADJ_REFCLK_FLADJ = ((125000/20) - + (125000/20.8333)) * 20.8333 = 5208 (ignoring the fractional value). */ + uint32_t gfladj_30mhz_reg_sel : 1; /**< [ 7: 7](R/W) This field selects whether to use the input signal fladj_30mhz_reg or the [GFLADJ_30MHZ] + to + adjust the frame length for the SOF/ITP. When this bit is set to, 1, the controller uses + [GFLADJ_30MHZ] value 0x0, the controller uses the input signal fladj_30mhz_reg value. */ + uint32_t reserved_6 : 1; + uint32_t gfladj_30mhz : 6; /**< [ 5: 0](R/W) This field indicates the value that is used for frame length adjustment instead of + considering from the sideband input signal fladj_30mhz_reg. This enables post-silicon + frame length adjustment in case the input signal fladj_30mhz_reg is connected to a wrong + value or is not valid. The controller uses this value if [GFLADJ_30MHZ_REG_SEL] = 1 and + the + SOF/ITP counters are running off of UTMI(ULPI) clock ([GFLADJ_REFCLK_LPM_SEL] = 0 and + USBH()_UAHC_GCTL[SOFITPSYNC] is 1 or 0). For details on how to set this value, refer to + section 5.2.4 Frame Length Adjustment Register (FLADJ) of the xHCI Specification. */ +#else /* Word 0 - Little Endian */ + uint32_t gfladj_30mhz : 6; /**< [ 5: 0](R/W) This field indicates the value that is used for frame length adjustment instead of + considering from the sideband input signal fladj_30mhz_reg. This enables post-silicon + frame length adjustment in case the input signal fladj_30mhz_reg is connected to a wrong + value or is not valid. The controller uses this value if [GFLADJ_30MHZ_REG_SEL] = 1 and + the + SOF/ITP counters are running off of UTMI(ULPI) clock ([GFLADJ_REFCLK_LPM_SEL] = 0 and + USBH()_UAHC_GCTL[SOFITPSYNC] is 1 or 0). For details on how to set this value, refer to + section 5.2.4 Frame Length Adjustment Register (FLADJ) of the xHCI Specification. */ + uint32_t reserved_6 : 1; + uint32_t gfladj_30mhz_reg_sel : 1; /**< [ 7: 7](R/W) This field selects whether to use the input signal fladj_30mhz_reg or the [GFLADJ_30MHZ] + to + adjust the frame length for the SOF/ITP. When this bit is set to, 1, the controller uses + [GFLADJ_30MHZ] value 0x0, the controller uses the input signal fladj_30mhz_reg value. */ + uint32_t gfladj_refclk_fladj : 14; /**< [ 21: 8](R/W) This field indicates the frame length adjustment to be applied when SOF/ITP counter is + running off of the REF_CLK. This register value is used to adjust:. + * ITP interval when USBH()_UAHC_GCTL[SOFITPSYNC] = 1 + * both SOF and ITP interval when [GFLADJ_REFCLK_LPM_SEL] = 1. + + This field must be programmed to a nonzero value only if [GFLADJ_REFCLK_LPM_SEL] = 1 or + USBH()_UAHC_GCTL[SOFITPSYNC] = 1. + + The value is derived as below: + + _ FLADJ_REF_CLK_FLADJ = ((125000/ref_clk_period_integer) - (125000/ref_clk_period)) * + ref_clk_period + + where, + * the ref_clk_period_integer is the integer value of the REF_CLK period got by truncating + the decimal (fractional) value that is programmed in USBH()_UAHC_GUCTL[REFCLKPER]. + * the ref_clk_period is the REF_CLK period including the fractional value. + + Examples: + + If the REF_CLK is 24 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 41. + * GLADJ_REFCLK_FLADJ = ((125000/41) - + (125000/41.6666)) * 41.6666 = 2032 (ignoring the fractional value). + + If the REF_CLK is 48 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 20. + * GLADJ_REFCLK_FLADJ = ((125000/20) - + (125000/20.8333)) * 20.8333 = 5208 (ignoring the fractional value). */ + uint32_t reserved_22 : 1; + uint32_t gfladj_refclk_lpm_sel : 1; /**< [ 23: 23](R/W) This bit enables the functionality of running SOF/ITP counters on the REF_CLK. + This bit must not be set to 1 if USBH()_UAHC_GCTL[SOFITPSYNC] = 1. Similarly, if + [GFLADJ_REFCLK_LPM_SEL] = 1, USBH()_UAHC_GCTL[SOFITPSYNC] must not be set to 1. + When [GFLADJ_REFCLK_LPM_SEL] = 1 the overloading of the suspend control of the USB 2.0 + first + port PHY (UTMI) with USB 3.0 port states is removed. Note that the REF_CLK frequencies + supported in this mode are 16/17/19.2/20/24/39.7/40 MHz. + + Internal: + The utmi_clk[0] signal of the core must be connected to the FREECLK of the PHY. + If you set this bit to 1, USBH()_UAHC_GUSB2PHYCFG()[U2_FREECLK_EXISTS] must be set to 0. */ + uint32_t gfladj_refclk_240mhz_decr : 7;/**< [ 30: 24](R/W) This field indicates the decrement value that the controller applies for each REF_CLK in + order to derive a frame timer in terms of a 240-MHz clock. This field must be programmed + to a nonzero value only if [GFLADJ_REFCLK_LPM_SEL] is set to 1. + + The value is derived as follows: + _ [GFLADJ_REFCLK_240MHZ_DECR] = 240/ref_clk_frequency + + Examples: + + If the REF_CLK is 24 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 41. + * [GFLADJ_REFCLK_240MHZ_DECR] = 240/24 = 10. + + If the REF_CLK is 48 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 20. + * [GFLADJ_REFCLK_240MHZ_DECR] = 240/48 = 5. + + If the REF_CLK is 17 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 58. + * [GFLADJ_REFCLK_240MHZ_DECR] = 240/17 = 14. */ + uint32_t gfladj_refclk_240mhzdecr_pls1 : 1;/**< [ 31: 31](R/W) This field indicates that the decrement value that the controller applies for each REF_CLK + must be GFLADJ_REFCLK_240MHZ_DECR and GFLADJ_REFCLK_240MHZ_DECR +1 alternatively on each + REF_CLK. Set this bit to 1 only if [GFLADJ_REFCLK_LPM_SEL] is set to 1 and the fractional + component of 240/ref_frequency is greater than or equal to 0.5. + + Example: + + If the REF_CLK is 19.2 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 52. + * [GFLADJ_REFCLK_240MHZ_DECR] = (240/19.2) = 12.5. + * [GFLADJ_REFCLK_240MHZDECR_PLS1] = 1. + + If the REF_CLK is 24 MHz then: + * USBH()_UAHC_GUCTL[REFCLKPER] = 41. + * [GFLADJ_REFCLK_240MHZ_DECR] = (240/24) = 10. + * [GFLADJ_REFCLK_240MHZDECR_PLS1] = 0. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gfladj_s cn; */ +}; +typedef union bdk_usbhx_uahc_gfladj bdk_usbhx_uahc_gfladj_t; + +static inline uint64_t BDK_USBHX_UAHC_GFLADJ(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GFLADJ(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c630ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GFLADJ", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GFLADJ(a) bdk_usbhx_uahc_gfladj_t +#define bustype_BDK_USBHX_UAHC_GFLADJ(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GFLADJ(a) "USBHX_UAHC_GFLADJ" +#define device_bar_BDK_USBHX_UAHC_GFLADJ(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GFLADJ(a) (a) +#define arguments_BDK_USBHX_UAHC_GFLADJ(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_ggpio + * + * UAHC Core General-Purpose I/O Register + * The application can use this register for general purpose input and output ports or for + * debugging. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.9. + */ +union bdk_usbhx_uahc_ggpio +{ + uint32_t u; + struct bdk_usbhx_uahc_ggpio_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t gpo : 16; /**< [ 31: 16](R/W) General purpose output. These outputs are not connected to anything. Can be used as scratch. */ + uint32_t gpi : 16; /**< [ 15: 0](RO) General purpose input. These inputs are tied 0x0. */ +#else /* Word 0 - Little Endian */ + uint32_t gpi : 16; /**< [ 15: 0](RO) General purpose input. These inputs are tied 0x0. */ + uint32_t gpo : 16; /**< [ 31: 16](R/W) General purpose output. These outputs are not connected to anything. Can be used as scratch. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_ggpio_s cn; */ +}; +typedef union bdk_usbhx_uahc_ggpio bdk_usbhx_uahc_ggpio_t; + +static inline uint64_t BDK_USBHX_UAHC_GGPIO(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GGPIO(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c124ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GGPIO", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GGPIO(a) bdk_usbhx_uahc_ggpio_t +#define bustype_BDK_USBHX_UAHC_GGPIO(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GGPIO(a) "USBHX_UAHC_GGPIO" +#define device_bar_BDK_USBHX_UAHC_GGPIO(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GGPIO(a) (a) +#define arguments_BDK_USBHX_UAHC_GGPIO(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_ghwparams0 + * + * UAHC Hardware Parameters Register 0 + * This register contains the hardware configuration options selected at compile-time. + * Internal: + * Register field names refer to Synopsys DWC_USB3_* parameters of the same suffix. + * INTERNAL: See Synopsys DWC_usb3 Databook v2.50a, section 6.2.3.1. + */ +union bdk_usbhx_uahc_ghwparams0 +{ + uint32_t u; + struct bdk_usbhx_uahc_ghwparams0_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t awidth : 8; /**< [ 31: 24](RO) USB core bus-address width. */ + uint32_t sdwidth : 8; /**< [ 23: 16](RO) USB core bus slave-data width. */ + uint32_t mdwidth : 8; /**< [ 15: 8](RO) USB core bus master-data width. */ + uint32_t sbus_type : 2; /**< [ 7: 6](RO) USB core bus slave type: AXI. */ + uint32_t mbus_type : 3; /**< [ 5: 3](RO) USB core bus master type: AXI. */ + uint32_t mode : 3; /**< [ 2: 0](RO) Operation mode: 0x1: host-only. */ +#else /* Word 0 - Little Endian */ + uint32_t mode : 3; /**< [ 2: 0](RO) Operation mode: 0x1: host-only. */ + uint32_t mbus_type : 3; /**< [ 5: 3](RO) USB core bus master type: AXI. */ + uint32_t sbus_type : 2; /**< [ 7: 6](RO) USB core bus slave type: AXI. */ + uint32_t mdwidth : 8; /**< [ 15: 8](RO) USB core bus master-data width. */ + uint32_t sdwidth : 8; /**< [ 23: 16](RO) USB core bus slave-data width. */ + uint32_t awidth : 8; /**< [ 31: 24](RO) USB core bus-address width. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_ghwparams0_s cn; */ +}; +typedef union bdk_usbhx_uahc_ghwparams0 bdk_usbhx_uahc_ghwparams0_t; + +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS0(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS0(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c140ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GHWPARAMS0", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GHWPARAMS0(a) bdk_usbhx_uahc_ghwparams0_t +#define bustype_BDK_USBHX_UAHC_GHWPARAMS0(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GHWPARAMS0(a) "USBHX_UAHC_GHWPARAMS0" +#define device_bar_BDK_USBHX_UAHC_GHWPARAMS0(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GHWPARAMS0(a) (a) +#define arguments_BDK_USBHX_UAHC_GHWPARAMS0(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_ghwparams1 + * + * UAHC Hardware Parameters Register 1 + * This register contains the hardware configuration options selected at compile-time. + * Internal: + * Register field names refer to Synopsys DWC_USB3_* parameters of the same suffix. + * INTERNAL: See Synopsys DWC_usb3 Databook v2.50a, section 6.2.3.2. + */ +union bdk_usbhx_uahc_ghwparams1 +{ + uint32_t u; + struct bdk_usbhx_uahc_ghwparams1_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t en_dbc : 1; /**< [ 31: 31](RO) Enable debug capability. */ + uint32_t rm_opt_features : 1; /**< [ 30: 30](RO) Remove optional features. */ + uint32_t sync_rst : 1; /**< [ 29: 29](RO) Synchronous reset coding. */ + uint32_t ram_bus_clks_sync : 1; /**< [ 28: 28](RO) RAM_CLK and BUS_CLK are synchronous. + Internal: + (appears to be orthogonal from the + RAM_CLK_TO_BUS_CLK parameter) */ + uint32_t mac_ram_clks_sync : 1; /**< [ 27: 27](RO) MAC3_CLK and RAM_CLK are synchronous. */ + uint32_t mac_phy_clks_sync : 1; /**< [ 26: 26](RO) MAC3_CLK and PHY_CLK are synchronous. */ + uint32_t en_pwropt : 2; /**< [ 25: 24](RO) Power optimization mode: + bit\<0\> = Clock-gating feature available. + bit\<1\> = Hibernation feature available. */ + uint32_t spram_typ : 1; /**< [ 23: 23](RO) SRAM type: one-port RAMs. */ + uint32_t num_rams : 2; /**< [ 22: 21](RO) Number of RAMs. */ + uint32_t device_num_int : 6; /**< [ 20: 15](RO) Number of event buffers (and interrupts) in device-mode (unsupported). */ + uint32_t aspacewidth : 3; /**< [ 14: 12](RO) Native interface address-space port width. */ + uint32_t reqinfowidth : 3; /**< [ 11: 9](RO) Native interface request/response-info port width. */ + uint32_t datainfowidth : 3; /**< [ 8: 6](RO) Native interface data-info port width. */ + uint32_t burstwidth_m1 : 3; /**< [ 5: 3](RO) Width minus one of AXI length field. */ + uint32_t idwidth_m1 : 3; /**< [ 2: 0](RO) Width minus one of AXI ID field. */ +#else /* Word 0 - Little Endian */ + uint32_t idwidth_m1 : 3; /**< [ 2: 0](RO) Width minus one of AXI ID field. */ + uint32_t burstwidth_m1 : 3; /**< [ 5: 3](RO) Width minus one of AXI length field. */ + uint32_t datainfowidth : 3; /**< [ 8: 6](RO) Native interface data-info port width. */ + uint32_t reqinfowidth : 3; /**< [ 11: 9](RO) Native interface request/response-info port width. */ + uint32_t aspacewidth : 3; /**< [ 14: 12](RO) Native interface address-space port width. */ + uint32_t device_num_int : 6; /**< [ 20: 15](RO) Number of event buffers (and interrupts) in device-mode (unsupported). */ + uint32_t num_rams : 2; /**< [ 22: 21](RO) Number of RAMs. */ + uint32_t spram_typ : 1; /**< [ 23: 23](RO) SRAM type: one-port RAMs. */ + uint32_t en_pwropt : 2; /**< [ 25: 24](RO) Power optimization mode: + bit\<0\> = Clock-gating feature available. + bit\<1\> = Hibernation feature available. */ + uint32_t mac_phy_clks_sync : 1; /**< [ 26: 26](RO) MAC3_CLK and PHY_CLK are synchronous. */ + uint32_t mac_ram_clks_sync : 1; /**< [ 27: 27](RO) MAC3_CLK and RAM_CLK are synchronous. */ + uint32_t ram_bus_clks_sync : 1; /**< [ 28: 28](RO) RAM_CLK and BUS_CLK are synchronous. + Internal: + (appears to be orthogonal from the + RAM_CLK_TO_BUS_CLK parameter) */ + uint32_t sync_rst : 1; /**< [ 29: 29](RO) Synchronous reset coding. */ + uint32_t rm_opt_features : 1; /**< [ 30: 30](RO) Remove optional features. */ + uint32_t en_dbc : 1; /**< [ 31: 31](RO) Enable debug capability. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_ghwparams1_s cn; */ +}; +typedef union bdk_usbhx_uahc_ghwparams1 bdk_usbhx_uahc_ghwparams1_t; + +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS1(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS1(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c144ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GHWPARAMS1", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GHWPARAMS1(a) bdk_usbhx_uahc_ghwparams1_t +#define bustype_BDK_USBHX_UAHC_GHWPARAMS1(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GHWPARAMS1(a) "USBHX_UAHC_GHWPARAMS1" +#define device_bar_BDK_USBHX_UAHC_GHWPARAMS1(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GHWPARAMS1(a) (a) +#define arguments_BDK_USBHX_UAHC_GHWPARAMS1(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_ghwparams2 + * + * UAHC Core GHW Parameters Register 2 + * This register contains the hardware configuration options selected at compile-time. + * Internal: + * Register field names refer to Synopsys DWC_USB3_* parameters of the same suffix. + * INTERNAL: See Synopsys DWC_usb3 Databook v2.50a, section 6.2.3.3. + */ +union bdk_usbhx_uahc_ghwparams2 +{ + uint32_t u; + struct bdk_usbhx_uahc_ghwparams2_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t userid : 32; /**< [ 31: 0](RO) User ID. */ +#else /* Word 0 - Little Endian */ + uint32_t userid : 32; /**< [ 31: 0](RO) User ID. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_ghwparams2_s cn; */ +}; +typedef union bdk_usbhx_uahc_ghwparams2 bdk_usbhx_uahc_ghwparams2_t; + +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS2(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS2(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c148ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GHWPARAMS2", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GHWPARAMS2(a) bdk_usbhx_uahc_ghwparams2_t +#define bustype_BDK_USBHX_UAHC_GHWPARAMS2(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GHWPARAMS2(a) "USBHX_UAHC_GHWPARAMS2" +#define device_bar_BDK_USBHX_UAHC_GHWPARAMS2(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GHWPARAMS2(a) (a) +#define arguments_BDK_USBHX_UAHC_GHWPARAMS2(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_ghwparams3 + * + * UAHC GHW Parameters Register 3 + * This register contains the hardware configuration options selected at compile-time. + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.3.4. + */ +union bdk_usbhx_uahc_ghwparams3 +{ + uint32_t u; + struct bdk_usbhx_uahc_ghwparams3_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_31 : 1; + uint32_t cache_total_xfer_resources : 8;/**< [ 30: 23](RO) Maximum number of transfer resources in the core. */ + uint32_t num_in_eps : 5; /**< [ 22: 18](RO) Maximum number of device-mode (unsupported) IN endpoints active. */ + uint32_t num_eps : 6; /**< [ 17: 12](RO) Number of device-mode (unsupported) single-directional endpoints. */ + uint32_t ulpi_carkit : 1; /**< [ 11: 11](RO) ULPI carkit is not supported. */ + uint32_t vendor_ctl_interface : 1; /**< [ 10: 10](RO) UTMI+ PHY vendor control interface enabled. */ + uint32_t reserved_8_9 : 2; + uint32_t hsphy_dwidth : 2; /**< [ 7: 6](RO) Data width of the UTMI+ PHY interface: 0x2 = 8-or-16 bits. */ + uint32_t fsphy_interface : 2; /**< [ 5: 4](RO) USB 1.1 full-speed serial transceiver interface. */ + uint32_t hsphy_interface : 2; /**< [ 3: 2](RO) High-speed PHY interface: 0x1 = UTMI+. */ + uint32_t ssphy_interface : 2; /**< [ 1: 0](RO) SuperSpeed PHY interface: 0x1 = PIPE3. */ +#else /* Word 0 - Little Endian */ + uint32_t ssphy_interface : 2; /**< [ 1: 0](RO) SuperSpeed PHY interface: 0x1 = PIPE3. */ + uint32_t hsphy_interface : 2; /**< [ 3: 2](RO) High-speed PHY interface: 0x1 = UTMI+. */ + uint32_t fsphy_interface : 2; /**< [ 5: 4](RO) USB 1.1 full-speed serial transceiver interface. */ + uint32_t hsphy_dwidth : 2; /**< [ 7: 6](RO) Data width of the UTMI+ PHY interface: 0x2 = 8-or-16 bits. */ + uint32_t reserved_8_9 : 2; + uint32_t vendor_ctl_interface : 1; /**< [ 10: 10](RO) UTMI+ PHY vendor control interface enabled. */ + uint32_t ulpi_carkit : 1; /**< [ 11: 11](RO) ULPI carkit is not supported. */ + uint32_t num_eps : 6; /**< [ 17: 12](RO) Number of device-mode (unsupported) single-directional endpoints. */ + uint32_t num_in_eps : 5; /**< [ 22: 18](RO) Maximum number of device-mode (unsupported) IN endpoints active. */ + uint32_t cache_total_xfer_resources : 8;/**< [ 30: 23](RO) Maximum number of transfer resources in the core. */ + uint32_t reserved_31 : 1; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_ghwparams3_s cn; */ +}; +typedef union bdk_usbhx_uahc_ghwparams3 bdk_usbhx_uahc_ghwparams3_t; + +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS3(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS3(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c14cll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GHWPARAMS3", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GHWPARAMS3(a) bdk_usbhx_uahc_ghwparams3_t +#define bustype_BDK_USBHX_UAHC_GHWPARAMS3(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GHWPARAMS3(a) "USBHX_UAHC_GHWPARAMS3" +#define device_bar_BDK_USBHX_UAHC_GHWPARAMS3(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GHWPARAMS3(a) (a) +#define arguments_BDK_USBHX_UAHC_GHWPARAMS3(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_ghwparams4 + * + * UAHC GHW Parameters Register 4 + * This register contains the hardware configuration options selected at compile-time. + * Internal: + * Register field names refer to Synopsys DWC_USB3_* parameters of the same suffix. + * INTERNAL: See Synopsys DWC_usb3 Databook v2.50a, section 6.2.3.5. + */ +union bdk_usbhx_uahc_ghwparams4 +{ + uint32_t u; + struct bdk_usbhx_uahc_ghwparams4_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t bmu_lsp_depth : 4; /**< [ 31: 28](RO) Depth of the BMU-LSP status buffer. */ + uint32_t bmu_ptl_depth_m1 : 4; /**< [ 27: 24](RO) Depth of the BMU-PTL source/sink buffers minus 1. */ + uint32_t en_isoc_supt : 1; /**< [ 23: 23](RO) Isochronous support enabled. */ + uint32_t reserved_22 : 1; + uint32_t ext_buff_control : 1; /**< [ 21: 21](RO) Enables device external buffer control sideband controls. */ + uint32_t num_ss_usb_instances : 4; /**< [ 20: 17](RO) Number of SuperSpeed bus instances. */ + uint32_t hiber_scratchbufs : 4; /**< [ 16: 13](RO) Number of hibernation scratchpad buffers. */ + uint32_t reserved_6_12 : 7; + uint32_t cache_trbs_per_transfer : 6;/**< [ 5: 0](RO) Number of TRBs per transfer that can be cached. */ +#else /* Word 0 - Little Endian */ + uint32_t cache_trbs_per_transfer : 6;/**< [ 5: 0](RO) Number of TRBs per transfer that can be cached. */ + uint32_t reserved_6_12 : 7; + uint32_t hiber_scratchbufs : 4; /**< [ 16: 13](RO) Number of hibernation scratchpad buffers. */ + uint32_t num_ss_usb_instances : 4; /**< [ 20: 17](RO) Number of SuperSpeed bus instances. */ + uint32_t ext_buff_control : 1; /**< [ 21: 21](RO) Enables device external buffer control sideband controls. */ + uint32_t reserved_22 : 1; + uint32_t en_isoc_supt : 1; /**< [ 23: 23](RO) Isochronous support enabled. */ + uint32_t bmu_ptl_depth_m1 : 4; /**< [ 27: 24](RO) Depth of the BMU-PTL source/sink buffers minus 1. */ + uint32_t bmu_lsp_depth : 4; /**< [ 31: 28](RO) Depth of the BMU-LSP status buffer. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_ghwparams4_s cn; */ +}; +typedef union bdk_usbhx_uahc_ghwparams4 bdk_usbhx_uahc_ghwparams4_t; + +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS4(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS4(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c150ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GHWPARAMS4", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GHWPARAMS4(a) bdk_usbhx_uahc_ghwparams4_t +#define bustype_BDK_USBHX_UAHC_GHWPARAMS4(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GHWPARAMS4(a) "USBHX_UAHC_GHWPARAMS4" +#define device_bar_BDK_USBHX_UAHC_GHWPARAMS4(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GHWPARAMS4(a) (a) +#define arguments_BDK_USBHX_UAHC_GHWPARAMS4(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_ghwparams5 + * + * UAHC GHW Parameters Register 5 + * This register contains the hardware configuration options selected at compile-time. + * Internal: + * Register field names refer to Synopsys DWC_USB3_* parameters of the same suffix. + * INTERNAL: See Synopsys DWC_usb3 Databook v2.50a, section 6.2.3.6. + */ +union bdk_usbhx_uahc_ghwparams5 +{ + uint32_t u; + struct bdk_usbhx_uahc_ghwparams5_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_28_31 : 4; + uint32_t dfq_fifo_depth : 6; /**< [ 27: 22](RO) Size of the BMU descriptor fetch-request queue. */ + uint32_t dwq_fifo_depth : 6; /**< [ 21: 16](RO) Size of the BMU descriptor write queue. */ + uint32_t txq_fifo_depth : 6; /**< [ 15: 10](RO) Size of the BMU TX request queue. */ + uint32_t rxq_fifo_depth : 6; /**< [ 9: 4](RO) Size of the BMU RX request queue. */ + uint32_t bmu_busgm_depth : 4; /**< [ 3: 0](RO) Depth of the BMU-BUSGM source/sink buffers. */ +#else /* Word 0 - Little Endian */ + uint32_t bmu_busgm_depth : 4; /**< [ 3: 0](RO) Depth of the BMU-BUSGM source/sink buffers. */ + uint32_t rxq_fifo_depth : 6; /**< [ 9: 4](RO) Size of the BMU RX request queue. */ + uint32_t txq_fifo_depth : 6; /**< [ 15: 10](RO) Size of the BMU TX request queue. */ + uint32_t dwq_fifo_depth : 6; /**< [ 21: 16](RO) Size of the BMU descriptor write queue. */ + uint32_t dfq_fifo_depth : 6; /**< [ 27: 22](RO) Size of the BMU descriptor fetch-request queue. */ + uint32_t reserved_28_31 : 4; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_ghwparams5_s cn; */ +}; +typedef union bdk_usbhx_uahc_ghwparams5 bdk_usbhx_uahc_ghwparams5_t; + +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS5(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS5(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c154ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GHWPARAMS5", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GHWPARAMS5(a) bdk_usbhx_uahc_ghwparams5_t +#define bustype_BDK_USBHX_UAHC_GHWPARAMS5(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GHWPARAMS5(a) "USBHX_UAHC_GHWPARAMS5" +#define device_bar_BDK_USBHX_UAHC_GHWPARAMS5(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GHWPARAMS5(a) (a) +#define arguments_BDK_USBHX_UAHC_GHWPARAMS5(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_ghwparams6 + * + * UAHC GHW Parameters Register 6 + * This register contains the hardware configuration options selected at compile-time. + * Internal: + * Register field names refer to Synopsys DWC_USB3_* parameters of the same suffix. + * INTERNAL: See Synopsys DWC_usb3 Databook v2.50a, section 6.2.3.7. + */ +union bdk_usbhx_uahc_ghwparams6 +{ + uint32_t u; + struct bdk_usbhx_uahc_ghwparams6_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t ram0_depth : 16; /**< [ 31: 16](RO) RAM0 depth. */ + uint32_t en_bus_filters : 1; /**< [ 15: 15](RO) Enable VBus filters support. */ + uint32_t en_bc : 1; /**< [ 14: 14](RO) Enable battery charging support. */ + uint32_t en_otg_ss : 1; /**< [ 13: 13](RO) Enable OTG SuperSpeed support. */ + uint32_t en_adp : 1; /**< [ 12: 12](RO) Enable ADP support. */ + uint32_t hnp_support : 1; /**< [ 11: 11](RO) HNP support. */ + uint32_t srp_support : 1; /**< [ 10: 10](RO) SRP support. */ + uint32_t reserved_8_9 : 2; + uint32_t en_fpga : 1; /**< [ 7: 7](RO) Enable FPGA implementation. */ + uint32_t en_dbg_ports : 1; /**< [ 6: 6](RO) Enable debug ports for FGPA. */ + uint32_t psq_fifo_depth : 6; /**< [ 5: 0](RO) Size of the BMU protocol status queue. */ +#else /* Word 0 - Little Endian */ + uint32_t psq_fifo_depth : 6; /**< [ 5: 0](RO) Size of the BMU protocol status queue. */ + uint32_t en_dbg_ports : 1; /**< [ 6: 6](RO) Enable debug ports for FGPA. */ + uint32_t en_fpga : 1; /**< [ 7: 7](RO) Enable FPGA implementation. */ + uint32_t reserved_8_9 : 2; + uint32_t srp_support : 1; /**< [ 10: 10](RO) SRP support. */ + uint32_t hnp_support : 1; /**< [ 11: 11](RO) HNP support. */ + uint32_t en_adp : 1; /**< [ 12: 12](RO) Enable ADP support. */ + uint32_t en_otg_ss : 1; /**< [ 13: 13](RO) Enable OTG SuperSpeed support. */ + uint32_t en_bc : 1; /**< [ 14: 14](RO) Enable battery charging support. */ + uint32_t en_bus_filters : 1; /**< [ 15: 15](RO) Enable VBus filters support. */ + uint32_t ram0_depth : 16; /**< [ 31: 16](RO) RAM0 depth. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_ghwparams6_s cn; */ +}; +typedef union bdk_usbhx_uahc_ghwparams6 bdk_usbhx_uahc_ghwparams6_t; + +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS6(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS6(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c158ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GHWPARAMS6", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GHWPARAMS6(a) bdk_usbhx_uahc_ghwparams6_t +#define bustype_BDK_USBHX_UAHC_GHWPARAMS6(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GHWPARAMS6(a) "USBHX_UAHC_GHWPARAMS6" +#define device_bar_BDK_USBHX_UAHC_GHWPARAMS6(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GHWPARAMS6(a) (a) +#define arguments_BDK_USBHX_UAHC_GHWPARAMS6(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_ghwparams7 + * + * UAHC GHW Parameters Register 7 + * This register contains the hardware configuration options selected at compile-time. + * Internal: + * Register field names refer to Synopsys DWC_USB3_* parameters of the same suffix. + * INTERNAL: See Synopsys DWC_usb3 Databook v2.50a, section 6.2.3.8. + */ +union bdk_usbhx_uahc_ghwparams7 +{ + uint32_t u; + struct bdk_usbhx_uahc_ghwparams7_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t ram2_depth : 16; /**< [ 31: 16](RO) RAM2 depth. */ + uint32_t ram1_depth : 16; /**< [ 15: 0](RO) RAM1 depth. */ +#else /* Word 0 - Little Endian */ + uint32_t ram1_depth : 16; /**< [ 15: 0](RO) RAM1 depth. */ + uint32_t ram2_depth : 16; /**< [ 31: 16](RO) RAM2 depth. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_ghwparams7_s cn; */ +}; +typedef union bdk_usbhx_uahc_ghwparams7 bdk_usbhx_uahc_ghwparams7_t; + +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS7(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS7(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c15cll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GHWPARAMS7", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GHWPARAMS7(a) bdk_usbhx_uahc_ghwparams7_t +#define bustype_BDK_USBHX_UAHC_GHWPARAMS7(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GHWPARAMS7(a) "USBHX_UAHC_GHWPARAMS7" +#define device_bar_BDK_USBHX_UAHC_GHWPARAMS7(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GHWPARAMS7(a) (a) +#define arguments_BDK_USBHX_UAHC_GHWPARAMS7(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_ghwparams8 + * + * UAHC GHW Parameters Register 8 + * This register contains the hardware configuration options selected at compile-time. + * Internal: + * Register field names refer to Synopsys DWC_USB3_* parameters of the same suffix. + * INTERNAL: See Synopsys DWC_usb3 Databook v2.20a, section 6.2.3.9. + */ +union bdk_usbhx_uahc_ghwparams8 +{ + uint32_t u; + struct bdk_usbhx_uahc_ghwparams8_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t dcache_depth_info : 32; /**< [ 31: 0](RO) Dcache depth. */ +#else /* Word 0 - Little Endian */ + uint32_t dcache_depth_info : 32; /**< [ 31: 0](RO) Dcache depth. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_ghwparams8_s cn; */ +}; +typedef union bdk_usbhx_uahc_ghwparams8 bdk_usbhx_uahc_ghwparams8_t; + +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS8(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GHWPARAMS8(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c600ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GHWPARAMS8", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GHWPARAMS8(a) bdk_usbhx_uahc_ghwparams8_t +#define bustype_BDK_USBHX_UAHC_GHWPARAMS8(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GHWPARAMS8(a) "USBHX_UAHC_GHWPARAMS8" +#define device_bar_BDK_USBHX_UAHC_GHWPARAMS8(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GHWPARAMS8(a) (a) +#define arguments_BDK_USBHX_UAHC_GHWPARAMS8(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gpmsts + * + * UAHC Global Power Management Status Register + * This debug register gives information on which event caused the hibernation exit. These + * registers are for debug purposes. They provide debug information on the internal status and + * state machines. Global debug registers have design-specific information, and are used by for + * debugging purposes. These registers are not intended to be used by the customer. If any debug + * assistance is needed for the silicon, contact customer support with a dump of these registers. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.4.1. + * INTERNAL: Contact Synopsys directly. + */ +union bdk_usbhx_uahc_gpmsts +{ + uint32_t u; + struct bdk_usbhx_uahc_gpmsts_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t portsel : 4; /**< [ 31: 28](WO) This field selects the port number. Always 0x0. */ + uint32_t reserved_17_27 : 11; + uint32_t u3wakeup : 5; /**< [ 16: 12](RO/H) This field gives the USB 3.0 port wakeup conditions. + bit\<12\> = Overcurrent detected. + bit\<13\> = Resume detected. + bit\<14\> = Connect detected. + bit\<15\> = Disconnect detected. + bit\<16\> = Last connection state. */ + uint32_t reserved_10_11 : 2; + uint32_t u2wakeup : 10; /**< [ 9: 0](RO/H) This field indicates the USB 2.0 port wakeup conditions. + bit\<0\> = Overcurrent detected. + bit\<1\> = Resume detected. + bit\<2\> = Connect detected. + bit\<3\> = Disconnect detected. + bit\<4\> = Last connection state. + bit\<5\> = ID change detected. + bit\<6\> = SRP request detected. + bit\<7\> = ULPI interrupt detected. + bit\<8\> = USB reset detected. + bit\<9\> = Resume detected changed. */ +#else /* Word 0 - Little Endian */ + uint32_t u2wakeup : 10; /**< [ 9: 0](RO/H) This field indicates the USB 2.0 port wakeup conditions. + bit\<0\> = Overcurrent detected. + bit\<1\> = Resume detected. + bit\<2\> = Connect detected. + bit\<3\> = Disconnect detected. + bit\<4\> = Last connection state. + bit\<5\> = ID change detected. + bit\<6\> = SRP request detected. + bit\<7\> = ULPI interrupt detected. + bit\<8\> = USB reset detected. + bit\<9\> = Resume detected changed. */ + uint32_t reserved_10_11 : 2; + uint32_t u3wakeup : 5; /**< [ 16: 12](RO/H) This field gives the USB 3.0 port wakeup conditions. + bit\<12\> = Overcurrent detected. + bit\<13\> = Resume detected. + bit\<14\> = Connect detected. + bit\<15\> = Disconnect detected. + bit\<16\> = Last connection state. */ + uint32_t reserved_17_27 : 11; + uint32_t portsel : 4; /**< [ 31: 28](WO) This field selects the port number. Always 0x0. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gpmsts_s cn; */ +}; +typedef union bdk_usbhx_uahc_gpmsts bdk_usbhx_uahc_gpmsts_t; + +static inline uint64_t BDK_USBHX_UAHC_GPMSTS(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GPMSTS(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c114ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GPMSTS", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GPMSTS(a) bdk_usbhx_uahc_gpmsts_t +#define bustype_BDK_USBHX_UAHC_GPMSTS(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GPMSTS(a) "USBHX_UAHC_GPMSTS" +#define device_bar_BDK_USBHX_UAHC_GPMSTS(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GPMSTS(a) (a) +#define arguments_BDK_USBHX_UAHC_GPMSTS(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uahc_gprtbimap + * + * UAHC SuperSpeed Port-to-Bus Instance Mapping Register + * This register specifies the SuperSpeed USB instance number to which each USB 3.0 port is + * connected. By default, USB 3.0 ports are evenly distributed among all SuperSpeed USB + * instances. Software can program this register to specify how USB 3.0 ports are connected to + * SuperSpeed USB instances. The UAHC only implements one SuperSpeed bus-instance, so this + * register should always be 0. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.2.1. + */ +union bdk_usbhx_uahc_gprtbimap +{ + uint64_t u; + struct bdk_usbhx_uahc_gprtbimap_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_4_63 : 60; + uint64_t binum1 : 4; /**< [ 3: 0](R/W) SuperSpeed USB instance number for port 1. */ +#else /* Word 0 - Little Endian */ + uint64_t binum1 : 4; /**< [ 3: 0](R/W) SuperSpeed USB instance number for port 1. */ + uint64_t reserved_4_63 : 60; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gprtbimap_s cn; */ +}; +typedef union bdk_usbhx_uahc_gprtbimap bdk_usbhx_uahc_gprtbimap_t; + +static inline uint64_t BDK_USBHX_UAHC_GPRTBIMAP(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GPRTBIMAP(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c138ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GPRTBIMAP", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GPRTBIMAP(a) bdk_usbhx_uahc_gprtbimap_t +#define bustype_BDK_USBHX_UAHC_GPRTBIMAP(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UAHC_GPRTBIMAP(a) "USBHX_UAHC_GPRTBIMAP" +#define device_bar_BDK_USBHX_UAHC_GPRTBIMAP(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GPRTBIMAP(a) (a) +#define arguments_BDK_USBHX_UAHC_GPRTBIMAP(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uahc_gprtbimap_fs + * + * UAHC Full/LowSpeed Port-to-Bus Instance Mapping Register + * This register specifies the full-speed/low-speed USB instance number to which each USB 1.1 + * port is connected. By default, USB 1.1 ports are evenly distributed among all full-speed/ + * low-speed USB instances. Software can program this register to specify how USB 1.1 ports are + * connected to full-speed/low-speed USB instances. The UAHC only implements one full-speed/ + * low-speed bus-instance, so this register should always be 0x0. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.20a, section 6.2.2.3. + */ +union bdk_usbhx_uahc_gprtbimap_fs +{ + uint64_t u; + struct bdk_usbhx_uahc_gprtbimap_fs_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_4_63 : 60; + uint64_t binum1 : 4; /**< [ 3: 0](R/W) Full-speed USB instance number for port 1. */ +#else /* Word 0 - Little Endian */ + uint64_t binum1 : 4; /**< [ 3: 0](R/W) Full-speed USB instance number for port 1. */ + uint64_t reserved_4_63 : 60; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gprtbimap_fs_s cn; */ +}; +typedef union bdk_usbhx_uahc_gprtbimap_fs bdk_usbhx_uahc_gprtbimap_fs_t; + +static inline uint64_t BDK_USBHX_UAHC_GPRTBIMAP_FS(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GPRTBIMAP_FS(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c188ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GPRTBIMAP_FS", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GPRTBIMAP_FS(a) bdk_usbhx_uahc_gprtbimap_fs_t +#define bustype_BDK_USBHX_UAHC_GPRTBIMAP_FS(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UAHC_GPRTBIMAP_FS(a) "USBHX_UAHC_GPRTBIMAP_FS" +#define device_bar_BDK_USBHX_UAHC_GPRTBIMAP_FS(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GPRTBIMAP_FS(a) (a) +#define arguments_BDK_USBHX_UAHC_GPRTBIMAP_FS(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uahc_gprtbimap_hs + * + * UAHC High-Speed Port-to-Bus Instance Mapping Register + * This register specifies the high-speed USB instance number to which each USB 2.0 port is + * connected. By default, USB 2.0 ports are evenly distributed among all high-speed USB + * instances. Software can program this register to specify how USB 2.0 ports are connected to + * high-speed USB instances. The UAHC only implements one high-speed bus-instance, so this + * register should always be 0. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.20a, section 6.2.2.2. + */ +union bdk_usbhx_uahc_gprtbimap_hs +{ + uint64_t u; + struct bdk_usbhx_uahc_gprtbimap_hs_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_4_63 : 60; + uint64_t binum1 : 4; /**< [ 3: 0](R/W) High-speed USB instance number for port 1. */ +#else /* Word 0 - Little Endian */ + uint64_t binum1 : 4; /**< [ 3: 0](R/W) High-speed USB instance number for port 1. */ + uint64_t reserved_4_63 : 60; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gprtbimap_hs_s cn; */ +}; +typedef union bdk_usbhx_uahc_gprtbimap_hs bdk_usbhx_uahc_gprtbimap_hs_t; + +static inline uint64_t BDK_USBHX_UAHC_GPRTBIMAP_HS(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GPRTBIMAP_HS(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c180ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GPRTBIMAP_HS", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GPRTBIMAP_HS(a) bdk_usbhx_uahc_gprtbimap_hs_t +#define bustype_BDK_USBHX_UAHC_GPRTBIMAP_HS(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UAHC_GPRTBIMAP_HS(a) "USBHX_UAHC_GPRTBIMAP_HS" +#define device_bar_BDK_USBHX_UAHC_GPRTBIMAP_HS(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GPRTBIMAP_HS(a) (a) +#define arguments_BDK_USBHX_UAHC_GPRTBIMAP_HS(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_grlsid + * + * UAHC Release ID Register + * This is a read-only register that contains the release number of the core. + * Internal: + * Original name: GSNPSID = Synopsys ID. + * INTERNAL: See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.8. + */ +union bdk_usbhx_uahc_grlsid +{ + uint32_t u; + struct bdk_usbhx_uahc_grlsid_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t releaseid : 32; /**< [ 31: 0](RO) Software can use this register to configure release-specific features in the driver. + Internal: + Synopsys ID + * SynopsysID[31:16] indicates Core Identification Number. 0x5533 is ASCII for + U3 (DWC_usb3). + * SynopsysID[15:0] indicates the release number. Current Release is 2.50a. */ +#else /* Word 0 - Little Endian */ + uint32_t releaseid : 32; /**< [ 31: 0](RO) Software can use this register to configure release-specific features in the driver. + Internal: + Synopsys ID + * SynopsysID[31:16] indicates Core Identification Number. 0x5533 is ASCII for + U3 (DWC_usb3). + * SynopsysID[15:0] indicates the release number. Current Release is 2.50a. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_grlsid_s cn; */ +}; +typedef union bdk_usbhx_uahc_grlsid bdk_usbhx_uahc_grlsid_t; + +static inline uint64_t BDK_USBHX_UAHC_GRLSID(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GRLSID(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c120ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GRLSID", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GRLSID(a) bdk_usbhx_uahc_grlsid_t +#define bustype_BDK_USBHX_UAHC_GRLSID(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GRLSID(a) "USBHX_UAHC_GRLSID" +#define device_bar_BDK_USBHX_UAHC_GRLSID(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GRLSID(a) (a) +#define arguments_BDK_USBHX_UAHC_GRLSID(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_grxfifoprihst + * + * UAHC RX FIFOs DMA Priority Register + * This register specifies the relative DMA priority level among the host RXFIFOs (one per USB + * bus instance) within the associated speed group (SuperSpeed or high-speed/full-speed/ + * low-speed). When multiple RXFIFOs compete for DMA service at a given time, the RXDMA arbiter + * grants access on a packet-basis in the following manner: + * + * Among the FIFOs in the same speed group (SuperSpeed or high-speed/full-speed/low-speed): + * * High-priority RXFIFOs are granted access using round-robin arbitration. + * * Low-priority RXFIFOs are granted access using round-robin arbitration only after high- + * priority + * RXFIFOs have no further processing to do (i.e., either the RXQs are empty or the corresponding + * RXFIFOs do not have the required data). + * + * The RX DMA arbiter prioritizes the SuperSpeed group or high-speed/full-speed/low-speed group + * according to the ratio programmed in + * USBH()_UAHC_GDMAHLRATIO. + * + * For scatter-gather packets, the arbiter grants successive DMA requests to the same FIFO until + * the entire packet is completed. The register size corresponds to the number of configured USB + * bus instances; for example, in the default configuration, there are 3 USB bus instances (1 + * SuperSpeed, 1 high-speed, and 1 full-speed/low-speed). + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.9.3. + */ +union bdk_usbhx_uahc_grxfifoprihst +{ + uint32_t u; + struct bdk_usbhx_uahc_grxfifoprihst_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_3_31 : 29; + uint32_t rx_priority : 3; /**< [ 2: 0](R/W) Each register bit[n] controls the priority (1 = high, 0 = low) of RXFIFO[n] within a speed group. */ +#else /* Word 0 - Little Endian */ + uint32_t rx_priority : 3; /**< [ 2: 0](R/W) Each register bit[n] controls the priority (1 = high, 0 = low) of RXFIFO[n] within a speed group. */ + uint32_t reserved_3_31 : 29; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_grxfifoprihst_s cn; */ +}; +typedef union bdk_usbhx_uahc_grxfifoprihst bdk_usbhx_uahc_grxfifoprihst_t; + +static inline uint64_t BDK_USBHX_UAHC_GRXFIFOPRIHST(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GRXFIFOPRIHST(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c61cll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GRXFIFOPRIHST", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GRXFIFOPRIHST(a) bdk_usbhx_uahc_grxfifoprihst_t +#define bustype_BDK_USBHX_UAHC_GRXFIFOPRIHST(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GRXFIFOPRIHST(a) "USBHX_UAHC_GRXFIFOPRIHST" +#define device_bar_BDK_USBHX_UAHC_GRXFIFOPRIHST(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GRXFIFOPRIHST(a) (a) +#define arguments_BDK_USBHX_UAHC_GRXFIFOPRIHST(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_grxfifosiz# + * + * UAHC RX FIFO Size Register + * The application can program the internal RAM start address/depth of the each RxFIFO as shown + * below. It is recommended that software use the default value. In Host mode, per-port registers + * are implemented. One register per FIFO. + * + * Reset values = 0:{0x0000_0084} 1:{0x0084_0104} 2:{0x0188_0180}. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.20a, section 6.2.6.2. + * INTERNAL: For more information, see the BMU section in Block Descriptions on Synopsys Databook + * page 238. + */ +union bdk_usbhx_uahc_grxfifosizx +{ + uint32_t u; + struct bdk_usbhx_uahc_grxfifosizx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t rxfstaddr : 16; /**< [ 31: 16](R/W) RxFIFOn RAM start address. This field contains the memory start address for RxFIFOn. The + reset value is derived from configuration parameters. */ + uint32_t rxfdep : 16; /**< [ 15: 0](R/W) RxFIFOn depth. This value is in terms of RX RAM Data width. + minimum value = 0x20, maximum value = 0x4000. + + Internal: + For more information, see the Hardware Integration chapter of the Synopsys + Databook. + The reset value is derived from configuration parameters. */ +#else /* Word 0 - Little Endian */ + uint32_t rxfdep : 16; /**< [ 15: 0](R/W) RxFIFOn depth. This value is in terms of RX RAM Data width. + minimum value = 0x20, maximum value = 0x4000. + + Internal: + For more information, see the Hardware Integration chapter of the Synopsys + Databook. + The reset value is derived from configuration parameters. */ + uint32_t rxfstaddr : 16; /**< [ 31: 16](R/W) RxFIFOn RAM start address. This field contains the memory start address for RxFIFOn. The + reset value is derived from configuration parameters. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_grxfifosizx_s cn; */ +}; +typedef union bdk_usbhx_uahc_grxfifosizx bdk_usbhx_uahc_grxfifosizx_t; + +static inline uint64_t BDK_USBHX_UAHC_GRXFIFOSIZX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GRXFIFOSIZX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b<=2))) + return 0x86800000c380ll + 0x1000000000ll * ((a) & 0x1) + 4ll * ((b) & 0x3); + __bdk_csr_fatal("USBHX_UAHC_GRXFIFOSIZX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GRXFIFOSIZX(a,b) bdk_usbhx_uahc_grxfifosizx_t +#define bustype_BDK_USBHX_UAHC_GRXFIFOSIZX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GRXFIFOSIZX(a,b) "USBHX_UAHC_GRXFIFOSIZX" +#define device_bar_BDK_USBHX_UAHC_GRXFIFOSIZX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GRXFIFOSIZX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_GRXFIFOSIZX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_grxthrcfg + * + * UAHC RX Threshold Control Register + * In a normal case, an RX burst starts as soon as 1-packet space is available. This works well + * as long as the system bus is faster than the USB3.0 bus (a 1024-bytes packet takes ~2.2 us on + * the USB bus in SuperSpeed mode). If the system bus latency is larger than 2.2 us to access a + * 1024-byte packet, then starting a burst on 1-packet condition leads to an early abort of the + * burst causing unnecessary performance reduction. This register allows the configuration of + * threshold and burst size control. This feature is enabled by USBRXPKTCNTSEL. + * + * Receive Path: + * * The RX threshold is controlled by USBRXPKTCNT and the RX burst size is controlled by + * USBMAXRXBURSTSIZE. + * * Selecting optimal RX FIFO size, RX threshold, and RX burst size avoids RX burst aborts due + * to overrun if the system bus is slower than USB. Once in a while overrun is OK, and there is + * no functional issue. + * * Some devices do not support terminating ACK retry. With these devices, host cannot set ACK=0 + * and Retry=0 and do retry later and you have to retry immediately. For such devices, minimize + * retry due to underrun. Setting threshold and burst size guarantees this. + * A larger RX threshold affects the performance since the scheduler is idle during this time. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.4. + */ +union bdk_usbhx_uahc_grxthrcfg +{ + uint32_t u; + struct bdk_usbhx_uahc_grxthrcfg_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_30_31 : 2; + uint32_t usbrxpktcntsel : 1; /**< [ 29: 29](R/W) USB receive-packet-count enable. Enables/disables the USB reception multipacket + thresholding: + 0 = the core can only start reception on the USB when the RX FIFO has space for at least + one packet. + 1 = the core can only start reception on the USB when the RX FIFO has space for at least + USBRXPKTCNT amount of packets. + This mode is only used for SuperSpeed. */ + uint32_t reserved_28 : 1; + uint32_t usbrxpktcnt : 4; /**< [ 27: 24](R/W) USB receive-packet count. In host-mode, specifies space (in number of packets) that must + be available in the RX FIFO before the core can start the corresponding USB RX transaction + (burst). + + This field is only valid when [USBRXPKTCNTSEL] = 1. The valid values are from 0x1 to 0xF. + This field must be \<= [USBMAXRXBURSTSIZE]. */ + uint32_t usbmaxrxburstsize : 5; /**< [ 23: 19](R/W) USB maximum receive-burst size. Specifies the maximum bulk IN burst the core + should do. When the system bus is slower than the USB, RX FIFO can overrun during a long + burst. + + Program a smaller value to this field to limit the RX burst size that the core can do. It + only applies to SuperSpeed Bulk, Isochronous, and Interrupt IN endpoints. + This field is only valid when [USBRXPKTCNTSEL] = 1. The valid values are from 0x1 to 0x10. */ + uint32_t reserved_0_18 : 19; +#else /* Word 0 - Little Endian */ + uint32_t reserved_0_18 : 19; + uint32_t usbmaxrxburstsize : 5; /**< [ 23: 19](R/W) USB maximum receive-burst size. Specifies the maximum bulk IN burst the core + should do. When the system bus is slower than the USB, RX FIFO can overrun during a long + burst. + + Program a smaller value to this field to limit the RX burst size that the core can do. It + only applies to SuperSpeed Bulk, Isochronous, and Interrupt IN endpoints. + This field is only valid when [USBRXPKTCNTSEL] = 1. The valid values are from 0x1 to 0x10. */ + uint32_t usbrxpktcnt : 4; /**< [ 27: 24](R/W) USB receive-packet count. In host-mode, specifies space (in number of packets) that must + be available in the RX FIFO before the core can start the corresponding USB RX transaction + (burst). + + This field is only valid when [USBRXPKTCNTSEL] = 1. The valid values are from 0x1 to 0xF. + This field must be \<= [USBMAXRXBURSTSIZE]. */ + uint32_t reserved_28 : 1; + uint32_t usbrxpktcntsel : 1; /**< [ 29: 29](R/W) USB receive-packet-count enable. Enables/disables the USB reception multipacket + thresholding: + 0 = the core can only start reception on the USB when the RX FIFO has space for at least + one packet. + 1 = the core can only start reception on the USB when the RX FIFO has space for at least + USBRXPKTCNT amount of packets. + This mode is only used for SuperSpeed. */ + uint32_t reserved_30_31 : 2; +#endif /* Word 0 - End */ + } s; + struct bdk_usbhx_uahc_grxthrcfg_cn + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_30_31 : 2; + uint32_t usbrxpktcntsel : 1; /**< [ 29: 29](R/W) USB receive-packet-count enable. Enables/disables the USB reception multipacket + thresholding: + 0 = the core can only start reception on the USB when the RX FIFO has space for at least + one packet. + 1 = the core can only start reception on the USB when the RX FIFO has space for at least + USBRXPKTCNT amount of packets. + This mode is only used for SuperSpeed. */ + uint32_t reserved_28 : 1; + uint32_t usbrxpktcnt : 4; /**< [ 27: 24](R/W) USB receive-packet count. In host-mode, specifies space (in number of packets) that must + be available in the RX FIFO before the core can start the corresponding USB RX transaction + (burst). + + This field is only valid when [USBRXPKTCNTSEL] = 1. The valid values are from 0x1 to 0xF. + This field must be \<= [USBMAXRXBURSTSIZE]. */ + uint32_t usbmaxrxburstsize : 5; /**< [ 23: 19](R/W) USB maximum receive-burst size. Specifies the maximum bulk IN burst the core + should do. When the system bus is slower than the USB, RX FIFO can overrun during a long + burst. + + Program a smaller value to this field to limit the RX burst size that the core can do. It + only applies to SuperSpeed Bulk, Isochronous, and Interrupt IN endpoints. + This field is only valid when [USBRXPKTCNTSEL] = 1. The valid values are from 0x1 to 0x10. */ + uint32_t reserved_16_18 : 3; + uint32_t reserved_15 : 1; + uint32_t reserved_11_14 : 4; + uint32_t reserved_0_10 : 11; +#else /* Word 0 - Little Endian */ + uint32_t reserved_0_10 : 11; + uint32_t reserved_11_14 : 4; + uint32_t reserved_15 : 1; + uint32_t reserved_16_18 : 3; + uint32_t usbmaxrxburstsize : 5; /**< [ 23: 19](R/W) USB maximum receive-burst size. Specifies the maximum bulk IN burst the core + should do. When the system bus is slower than the USB, RX FIFO can overrun during a long + burst. + + Program a smaller value to this field to limit the RX burst size that the core can do. It + only applies to SuperSpeed Bulk, Isochronous, and Interrupt IN endpoints. + This field is only valid when [USBRXPKTCNTSEL] = 1. The valid values are from 0x1 to 0x10. */ + uint32_t usbrxpktcnt : 4; /**< [ 27: 24](R/W) USB receive-packet count. In host-mode, specifies space (in number of packets) that must + be available in the RX FIFO before the core can start the corresponding USB RX transaction + (burst). + + This field is only valid when [USBRXPKTCNTSEL] = 1. The valid values are from 0x1 to 0xF. + This field must be \<= [USBMAXRXBURSTSIZE]. */ + uint32_t reserved_28 : 1; + uint32_t usbrxpktcntsel : 1; /**< [ 29: 29](R/W) USB receive-packet-count enable. Enables/disables the USB reception multipacket + thresholding: + 0 = the core can only start reception on the USB when the RX FIFO has space for at least + one packet. + 1 = the core can only start reception on the USB when the RX FIFO has space for at least + USBRXPKTCNT amount of packets. + This mode is only used for SuperSpeed. */ + uint32_t reserved_30_31 : 2; +#endif /* Word 0 - End */ + } cn; +}; +typedef union bdk_usbhx_uahc_grxthrcfg bdk_usbhx_uahc_grxthrcfg_t; + +static inline uint64_t BDK_USBHX_UAHC_GRXTHRCFG(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GRXTHRCFG(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c10cll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GRXTHRCFG", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GRXTHRCFG(a) bdk_usbhx_uahc_grxthrcfg_t +#define bustype_BDK_USBHX_UAHC_GRXTHRCFG(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GRXTHRCFG(a) "USBHX_UAHC_GRXTHRCFG" +#define device_bar_BDK_USBHX_UAHC_GRXTHRCFG(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GRXTHRCFG(a) (a) +#define arguments_BDK_USBHX_UAHC_GRXTHRCFG(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gsbuscfg0 + * + * UAHC Bus Configuration Register 0 + * This register can be used to configure the core after power-on or a change in mode of + * operation. This register mainly contains AXI system-related configuration parameters. Do not + * change this register after the initial programming. The application must program this register + * before starting any transactions on AXI. When [INCRBRSTENA] is enabled, it has the highest + * priority over other burst lengths. The core always performs the largest burst when enabled. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * The AXI cache signals are not connected in Cavium's hookup, so the *REQINFO fields + * can be ignored. + * INTERNAL: See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.1. + */ +union bdk_usbhx_uahc_gsbuscfg0 +{ + uint32_t u; + struct bdk_usbhx_uahc_gsbuscfg0_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t datrdreqinfo : 4; /**< [ 31: 28](R/W) AXI-cache for data-read operations. Always set to 0x0. */ + uint32_t desrdreqinfo : 4; /**< [ 27: 24](R/W) AXI-cache for descriptor-read operations. Always set to 0x0. */ + uint32_t datwrreqinfo : 4; /**< [ 23: 20](R/W) AXI-cache for data-write operations. Always set to 0x0. */ + uint32_t deswrreqinfo : 4; /**< [ 19: 16](R/W) AXI-cache for descriptor-write operations. Always set to 0x0. */ + uint32_t reserved_12_15 : 4; + uint32_t datbigend : 1; /**< [ 11: 11](R/W) Data access is big-endian. Keep this set to 0 (little-endian) and use the + USBH()_UCTL_SHIM_CFG[DMA_ENDIAN_MODE] setting instead. + + For diagnostic use only, drivers should be written assuming little-endian. */ + uint32_t descbigend : 1; /**< [ 10: 10](R/W) Descriptor access is big-endian. Keep this set to 0 (little-endian) and use the + USBH()_UCTL_SHIM_CFG[DMA_ENDIAN_MODE] setting instead. + + For diagnostic use only, drivers should be written assuming little-endian. */ + uint32_t reserved_8_9 : 2; + uint32_t incr256brstena : 1; /**< [ 7: 7](R/W) INCR256 burst-type enable. Always set to 0. */ + uint32_t incr128brstena : 1; /**< [ 6: 6](R/W) INCR128 burst-type enable. Always set to 0. */ + uint32_t incr64brstena : 1; /**< [ 5: 5](R/W) INCR64 burst-type enable. Always set to 0. */ + uint32_t incr32brstena : 1; /**< [ 4: 4](R/W) INCR32 burst-type enable. Always set to 0. */ + uint32_t incr16brstena : 1; /**< [ 3: 3](R/W) INCR16 burst-type enable. Allows the AXI master to generate INCR 16-beat bursts. */ + uint32_t incr8brstena : 1; /**< [ 2: 2](R/W) INCR8 burst-type enable. Allows the AXI master to generate INCR eight-beat bursts. */ + uint32_t incr4brstena : 1; /**< [ 1: 1](R/W) INCR4 burst-type enable. Allows the AXI master to generate INCR four-beat bursts. */ + uint32_t incrbrstena : 1; /**< [ 0: 0](R/W) Undefined-length INCR burst-type enable. + This bit determines the set of burst lengths to be utilized by the master interface. It + works in conjunction with the GSBUSCFG0[7:1] enables (INCR*BRSTENA). + + If disabled, the AXI master will use only the burst lengths + 1, 4, 8, 16 (assuming the INCR*BRSTENA are set to their reset values). + + If enabled, the AXI master uses any length less than or equal to the largest-enabled burst + length based on the INCR*BRSTENA fields. */ +#else /* Word 0 - Little Endian */ + uint32_t incrbrstena : 1; /**< [ 0: 0](R/W) Undefined-length INCR burst-type enable. + This bit determines the set of burst lengths to be utilized by the master interface. It + works in conjunction with the GSBUSCFG0[7:1] enables (INCR*BRSTENA). + + If disabled, the AXI master will use only the burst lengths + 1, 4, 8, 16 (assuming the INCR*BRSTENA are set to their reset values). + + If enabled, the AXI master uses any length less than or equal to the largest-enabled burst + length based on the INCR*BRSTENA fields. */ + uint32_t incr4brstena : 1; /**< [ 1: 1](R/W) INCR4 burst-type enable. Allows the AXI master to generate INCR four-beat bursts. */ + uint32_t incr8brstena : 1; /**< [ 2: 2](R/W) INCR8 burst-type enable. Allows the AXI master to generate INCR eight-beat bursts. */ + uint32_t incr16brstena : 1; /**< [ 3: 3](R/W) INCR16 burst-type enable. Allows the AXI master to generate INCR 16-beat bursts. */ + uint32_t incr32brstena : 1; /**< [ 4: 4](R/W) INCR32 burst-type enable. Always set to 0. */ + uint32_t incr64brstena : 1; /**< [ 5: 5](R/W) INCR64 burst-type enable. Always set to 0. */ + uint32_t incr128brstena : 1; /**< [ 6: 6](R/W) INCR128 burst-type enable. Always set to 0. */ + uint32_t incr256brstena : 1; /**< [ 7: 7](R/W) INCR256 burst-type enable. Always set to 0. */ + uint32_t reserved_8_9 : 2; + uint32_t descbigend : 1; /**< [ 10: 10](R/W) Descriptor access is big-endian. Keep this set to 0 (little-endian) and use the + USBH()_UCTL_SHIM_CFG[DMA_ENDIAN_MODE] setting instead. + + For diagnostic use only, drivers should be written assuming little-endian. */ + uint32_t datbigend : 1; /**< [ 11: 11](R/W) Data access is big-endian. Keep this set to 0 (little-endian) and use the + USBH()_UCTL_SHIM_CFG[DMA_ENDIAN_MODE] setting instead. + + For diagnostic use only, drivers should be written assuming little-endian. */ + uint32_t reserved_12_15 : 4; + uint32_t deswrreqinfo : 4; /**< [ 19: 16](R/W) AXI-cache for descriptor-write operations. Always set to 0x0. */ + uint32_t datwrreqinfo : 4; /**< [ 23: 20](R/W) AXI-cache for data-write operations. Always set to 0x0. */ + uint32_t desrdreqinfo : 4; /**< [ 27: 24](R/W) AXI-cache for descriptor-read operations. Always set to 0x0. */ + uint32_t datrdreqinfo : 4; /**< [ 31: 28](R/W) AXI-cache for data-read operations. Always set to 0x0. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gsbuscfg0_s cn; */ +}; +typedef union bdk_usbhx_uahc_gsbuscfg0 bdk_usbhx_uahc_gsbuscfg0_t; + +static inline uint64_t BDK_USBHX_UAHC_GSBUSCFG0(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GSBUSCFG0(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c100ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GSBUSCFG0", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GSBUSCFG0(a) bdk_usbhx_uahc_gsbuscfg0_t +#define bustype_BDK_USBHX_UAHC_GSBUSCFG0(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GSBUSCFG0(a) "USBHX_UAHC_GSBUSCFG0" +#define device_bar_BDK_USBHX_UAHC_GSBUSCFG0(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GSBUSCFG0(a) (a) +#define arguments_BDK_USBHX_UAHC_GSBUSCFG0(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gsbuscfg1 + * + * UAHC Bus Configuration Register 1 + * This register can be used to configure the core after power-on or a change in mode of + * operation. This register mainly contains AXI system-related configuration parameters. Do not + * change this register after the initial programming. The application must program this register + * before starting any transactions on AXI. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.2. + */ +union bdk_usbhx_uahc_gsbuscfg1 +{ + uint32_t u; + struct bdk_usbhx_uahc_gsbuscfg1_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_13_31 : 19; + uint32_t en1kpage : 1; /**< [ 12: 12](R/W) 1K page-boundary enable. + 0 = Break transfers at the 4K page boundary (default). + 1 = Break transfers at the 1K page boundary. */ + uint32_t pipetranslimit : 4; /**< [ 11: 8](R/W) AXI pipelined transfers burst-request limit. Controls the number of outstanding pipelined + transfers requests the AXI master will push to the AXI slave. Once the AXI master reaches + this limit, it does not make more requests on the AXI ARADDR and AWADDR buses until the + associated data phases complete. This field is encoded as follows: + 0x0 = 1 request. 0x8 = 9 requests. + 0x1 = 2 requests. 0x9 = 10 requests. + 0x2 = 3 requests. 0xA = 11 requests. + 0x3 = 4 requests. 0xB = 12 requests. + 0x4 = 5 requests. 0xC = 13 requests. + 0x5 = 6 requests. 0xD = 14 requests. + 0x6 = 7 requests. 0xE = 15 requests. + 0x7 = 8 requests. 0xF = 16 requests. */ + uint32_t reserved_0_7 : 8; +#else /* Word 0 - Little Endian */ + uint32_t reserved_0_7 : 8; + uint32_t pipetranslimit : 4; /**< [ 11: 8](R/W) AXI pipelined transfers burst-request limit. Controls the number of outstanding pipelined + transfers requests the AXI master will push to the AXI slave. Once the AXI master reaches + this limit, it does not make more requests on the AXI ARADDR and AWADDR buses until the + associated data phases complete. This field is encoded as follows: + 0x0 = 1 request. 0x8 = 9 requests. + 0x1 = 2 requests. 0x9 = 10 requests. + 0x2 = 3 requests. 0xA = 11 requests. + 0x3 = 4 requests. 0xB = 12 requests. + 0x4 = 5 requests. 0xC = 13 requests. + 0x5 = 6 requests. 0xD = 14 requests. + 0x6 = 7 requests. 0xE = 15 requests. + 0x7 = 8 requests. 0xF = 16 requests. */ + uint32_t en1kpage : 1; /**< [ 12: 12](R/W) 1K page-boundary enable. + 0 = Break transfers at the 4K page boundary (default). + 1 = Break transfers at the 1K page boundary. */ + uint32_t reserved_13_31 : 19; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gsbuscfg1_s cn; */ +}; +typedef union bdk_usbhx_uahc_gsbuscfg1 bdk_usbhx_uahc_gsbuscfg1_t; + +static inline uint64_t BDK_USBHX_UAHC_GSBUSCFG1(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GSBUSCFG1(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c104ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GSBUSCFG1", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GSBUSCFG1(a) bdk_usbhx_uahc_gsbuscfg1_t +#define bustype_BDK_USBHX_UAHC_GSBUSCFG1(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GSBUSCFG1(a) "USBHX_UAHC_GSBUSCFG1" +#define device_bar_BDK_USBHX_UAHC_GSBUSCFG1(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GSBUSCFG1(a) (a) +#define arguments_BDK_USBHX_UAHC_GSBUSCFG1(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gsts + * + * UAHC Core Status Register + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.6. + */ +union bdk_usbhx_uahc_gsts +{ + uint32_t u; + struct bdk_usbhx_uahc_gsts_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t cbelt : 12; /**< [ 31: 20](RO/H) Current BELT value. In host mode, indicates the minimum value of all received device BELT + values and the BELT value that is set by the set latency tolerance value command. */ + uint32_t reserved_8_19 : 12; + uint32_t host_ip : 1; /**< [ 7: 7](RO/H) Host interrupt pending. Indicates that there is a pending interrupt pertaining to xHC in + the host-event queue. */ + uint32_t reserved_6 : 1; + uint32_t csrtimeout : 1; /**< [ 5: 5](R/W1C/H) CSR timeout. When set to 1, indicates that software performed a write or read operation to + a core register that could not be completed within 0xFFFF controller-clock cycles. */ + uint32_t buserraddrvld : 1; /**< [ 4: 4](R/W1C/H) Bus-error address valid. Indicates that USBH()_UAHC_GBUSERRADDR is valid and reports the + first bus address that encounters a bus error. */ + uint32_t reserved_2_3 : 2; + uint32_t curmod : 2; /**< [ 1: 0](RO) Current mode of operation. Always 0x1. + Internal: + May vary from 0x1 if you write + USBH()_UAHC_GCTL[PRTCAPDIR]!=0x1. */ +#else /* Word 0 - Little Endian */ + uint32_t curmod : 2; /**< [ 1: 0](RO) Current mode of operation. Always 0x1. + Internal: + May vary from 0x1 if you write + USBH()_UAHC_GCTL[PRTCAPDIR]!=0x1. */ + uint32_t reserved_2_3 : 2; + uint32_t buserraddrvld : 1; /**< [ 4: 4](R/W1C/H) Bus-error address valid. Indicates that USBH()_UAHC_GBUSERRADDR is valid and reports the + first bus address that encounters a bus error. */ + uint32_t csrtimeout : 1; /**< [ 5: 5](R/W1C/H) CSR timeout. When set to 1, indicates that software performed a write or read operation to + a core register that could not be completed within 0xFFFF controller-clock cycles. */ + uint32_t reserved_6 : 1; + uint32_t host_ip : 1; /**< [ 7: 7](RO/H) Host interrupt pending. Indicates that there is a pending interrupt pertaining to xHC in + the host-event queue. */ + uint32_t reserved_8_19 : 12; + uint32_t cbelt : 12; /**< [ 31: 20](RO/H) Current BELT value. In host mode, indicates the minimum value of all received device BELT + values and the BELT value that is set by the set latency tolerance value command. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gsts_s cn; */ +}; +typedef union bdk_usbhx_uahc_gsts bdk_usbhx_uahc_gsts_t; + +static inline uint64_t BDK_USBHX_UAHC_GSTS(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GSTS(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c118ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GSTS", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GSTS(a) bdk_usbhx_uahc_gsts_t +#define bustype_BDK_USBHX_UAHC_GSTS(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GSTS(a) "USBHX_UAHC_GSTS" +#define device_bar_BDK_USBHX_UAHC_GSTS(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GSTS(a) (a) +#define arguments_BDK_USBHX_UAHC_GSTS(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gtxfifoprihst + * + * UAHC TX FIFOs DMA Priority Register + * This register specifies the relative DMA priority level among the host TXFIFOs (one per USB + * bus instance) within the associated speed group (SuperSpeed or high-speed/full-speed/ + * low-speed). When multiple TXFIFOs compete for DMA service at a given time, the TXDMA arbiter + * grants access on a packet-basis in the following manner: + * + * Among the FIFOs in the same speed group (SuperSpeed or high-speed/full-speed/low-speed): + * + * * High-priority TXFIFOs are granted access using round-robin arbitration. + * * Low-priority TXFIFOs are granted access using round-robin arbitration only after high- + * priority + * TXFIFOs have no further processing to do (i.e., either the TXQs are empty or the corresponding + * TXFIFOs do not have the required data). + * + * The TX DMA arbiter prioritizes the SuperSpeed group or high-speed/full-speed/low-speed group + * according to the ratio programmed in + * USBH()_UAHC_GDMAHLRATIO. + * + * For scatter-gather packets, the arbiter grants successive DMA requests to the same FIFO until + * the entire packet is completed. The register size corresponds to the number of configured USB + * bus instances; for example, in the default configuration, there are 3 USB bus instances (1 + * SuperSpeed, 1 high-speed, and 1 full-speed/low-speed). + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.9.2. + */ +union bdk_usbhx_uahc_gtxfifoprihst +{ + uint32_t u; + struct bdk_usbhx_uahc_gtxfifoprihst_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_3_31 : 29; + uint32_t tx_priority : 3; /**< [ 2: 0](R/W) Each register bit n controls the priority (1: high, 0: low) of TX FIFO\<n\> within a speed + group. */ +#else /* Word 0 - Little Endian */ + uint32_t tx_priority : 3; /**< [ 2: 0](R/W) Each register bit n controls the priority (1: high, 0: low) of TX FIFO\<n\> within a speed + group. */ + uint32_t reserved_3_31 : 29; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gtxfifoprihst_s cn; */ +}; +typedef union bdk_usbhx_uahc_gtxfifoprihst bdk_usbhx_uahc_gtxfifoprihst_t; + +static inline uint64_t BDK_USBHX_UAHC_GTXFIFOPRIHST(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GTXFIFOPRIHST(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c618ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GTXFIFOPRIHST", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GTXFIFOPRIHST(a) bdk_usbhx_uahc_gtxfifoprihst_t +#define bustype_BDK_USBHX_UAHC_GTXFIFOPRIHST(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GTXFIFOPRIHST(a) "USBHX_UAHC_GTXFIFOPRIHST" +#define device_bar_BDK_USBHX_UAHC_GTXFIFOPRIHST(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GTXFIFOPRIHST(a) (a) +#define arguments_BDK_USBHX_UAHC_GTXFIFOPRIHST(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gtxfifosiz# + * + * UAHC TX FIFO Size Registers + * This register holds the internal RAM start address/depth of each TxFIFO implemented. Unless + * packet size/buffer size for each endpoint is different and application-specific, it is + * recommended that the software use the default value. One register per FIFO. One register per + * FIFO. + * + * Reset values = 0:{0x0000_0082} 1:{0x0082_0103} 2:{0x0185_0205}. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.20a, section 6.2.6.1. + * INTERNAL: For more information, refer to the BMU section in Block Descriptions on Synopsys + * Databook page 238. + */ +union bdk_usbhx_uahc_gtxfifosizx +{ + uint32_t u; + struct bdk_usbhx_uahc_gtxfifosizx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t txfstaddr : 16; /**< [ 31: 16](R/W) Transmit FIFOn RAM start address. Contains the memory start address for TxFIFOn. The reset + is value derived from configuration parameters. */ + uint32_t txfdep : 16; /**< [ 15: 0](R/W) TxFIFOn depth. This value is in terms of TX RAM data width. + minimum value = 0x20, maximum value = 0x8000. + + Internal: + For more information, see the Hardware Integration chapter of the Synopsys + Databook. + The reset value derived from configuration parameters. */ +#else /* Word 0 - Little Endian */ + uint32_t txfdep : 16; /**< [ 15: 0](R/W) TxFIFOn depth. This value is in terms of TX RAM data width. + minimum value = 0x20, maximum value = 0x8000. + + Internal: + For more information, see the Hardware Integration chapter of the Synopsys + Databook. + The reset value derived from configuration parameters. */ + uint32_t txfstaddr : 16; /**< [ 31: 16](R/W) Transmit FIFOn RAM start address. Contains the memory start address for TxFIFOn. The reset + is value derived from configuration parameters. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gtxfifosizx_s cn; */ +}; +typedef union bdk_usbhx_uahc_gtxfifosizx bdk_usbhx_uahc_gtxfifosizx_t; + +static inline uint64_t BDK_USBHX_UAHC_GTXFIFOSIZX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GTXFIFOSIZX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b<=2))) + return 0x86800000c300ll + 0x1000000000ll * ((a) & 0x1) + 4ll * ((b) & 0x3); + __bdk_csr_fatal("USBHX_UAHC_GTXFIFOSIZX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GTXFIFOSIZX(a,b) bdk_usbhx_uahc_gtxfifosizx_t +#define bustype_BDK_USBHX_UAHC_GTXFIFOSIZX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GTXFIFOSIZX(a,b) "USBHX_UAHC_GTXFIFOSIZX" +#define device_bar_BDK_USBHX_UAHC_GTXFIFOSIZX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GTXFIFOSIZX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_GTXFIFOSIZX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gtxthrcfg + * + * UAHC TX Threshold Control Register + * In a normal case, a TX burst starts as soon as one packet is prefetched. This works well as + * long as the system bus is faster than the USB3.0 bus (a 1024-bytes packet takes ~2.2 us on the + * USB bus in SuperSpeed mode). If the system bus latency is larger than 2.2 us to access a + * 1024-byte packet, then starting a burst on 1-packet condition leads to an early abort of the + * burst causing unnecessary performance reduction. This register allows the configuration of + * threshold and burst size control. This feature is enabled by [USBTXPKTCNTSEL]. + * + * Transmit path: + * * The TX threshold is controlled by [USBTXPKTCNT], and the TX burst size is controlled by + * [USBMAXTXBURSTSIZE]. + * * Selecting optimal TX FIFO size, TX threshold, and TX burst size avoids TX burst aborts due + * to an underrun if the system bus is slower than USB. Once in a while an underrun is OK, and + * there is no functional issue. + * * A larger threshold affects the performance, since the scheduler is idle during this time. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.3. + */ +union bdk_usbhx_uahc_gtxthrcfg +{ + uint32_t u; + struct bdk_usbhx_uahc_gtxthrcfg_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_30_31 : 2; + uint32_t usbtxpktcntsel : 1; /**< [ 29: 29](R/W) USB transmit packet-count enable. Enables/disables the USB transmission multipacket + thresholding: + 0 = USB transmission multipacket thresholding is disabled, the core can only start + transmission on the USB after the entire packet has been fetched into the corresponding + TXFIFO. + 1 = USB transmission multipacket thresholding is enabled. The core can only start + transmission on the USB after USBTXPKTCNT amount of packets for the USB transaction + (burst) are already in the corresponding TXFIFO. + This mode is only used for SuperSpeed. */ + uint32_t reserved_28 : 1; + uint32_t usbtxpktcnt : 4; /**< [ 27: 24](R/W) USB transmit-packet count. Specifies the number of packets that must be in the TXFIFO + before the core can start transmission for the corresponding USB transaction (burst). This + field is only valid when [USBTXPKTCNTSEL] = 1. Valid values are from 0x1 to 0xF. + This field must be \<= [USBMAXTXBURSTSIZE]. */ + uint32_t usbmaxtxburstsize : 8; /**< [ 23: 16](R/W) USB maximum TX burst size. When [USBTXPKTCNTSEL] = 1, this field specifies the + maximum bulk OUT burst the core should do. When the system bus is slower than + the USB, TX FIFO can underrun during a long burst. Program a smaller value to + this field to limit the TX burst size that the core can do. It only applies to + SuperSpeed bulk, isochronous, and interrupt OUT endpoints in the host + mode. Valid values are from 0x1 to 0x10. */ + uint32_t reserved_0_15 : 16; +#else /* Word 0 - Little Endian */ + uint32_t reserved_0_15 : 16; + uint32_t usbmaxtxburstsize : 8; /**< [ 23: 16](R/W) USB maximum TX burst size. When [USBTXPKTCNTSEL] = 1, this field specifies the + maximum bulk OUT burst the core should do. When the system bus is slower than + the USB, TX FIFO can underrun during a long burst. Program a smaller value to + this field to limit the TX burst size that the core can do. It only applies to + SuperSpeed bulk, isochronous, and interrupt OUT endpoints in the host + mode. Valid values are from 0x1 to 0x10. */ + uint32_t usbtxpktcnt : 4; /**< [ 27: 24](R/W) USB transmit-packet count. Specifies the number of packets that must be in the TXFIFO + before the core can start transmission for the corresponding USB transaction (burst). This + field is only valid when [USBTXPKTCNTSEL] = 1. Valid values are from 0x1 to 0xF. + This field must be \<= [USBMAXTXBURSTSIZE]. */ + uint32_t reserved_28 : 1; + uint32_t usbtxpktcntsel : 1; /**< [ 29: 29](R/W) USB transmit packet-count enable. Enables/disables the USB transmission multipacket + thresholding: + 0 = USB transmission multipacket thresholding is disabled, the core can only start + transmission on the USB after the entire packet has been fetched into the corresponding + TXFIFO. + 1 = USB transmission multipacket thresholding is enabled. The core can only start + transmission on the USB after USBTXPKTCNT amount of packets for the USB transaction + (burst) are already in the corresponding TXFIFO. + This mode is only used for SuperSpeed. */ + uint32_t reserved_30_31 : 2; +#endif /* Word 0 - End */ + } s; + struct bdk_usbhx_uahc_gtxthrcfg_cn + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_30_31 : 2; + uint32_t usbtxpktcntsel : 1; /**< [ 29: 29](R/W) USB transmit packet-count enable. Enables/disables the USB transmission multipacket + thresholding: + 0 = USB transmission multipacket thresholding is disabled, the core can only start + transmission on the USB after the entire packet has been fetched into the corresponding + TXFIFO. + 1 = USB transmission multipacket thresholding is enabled. The core can only start + transmission on the USB after USBTXPKTCNT amount of packets for the USB transaction + (burst) are already in the corresponding TXFIFO. + This mode is only used for SuperSpeed. */ + uint32_t reserved_28 : 1; + uint32_t usbtxpktcnt : 4; /**< [ 27: 24](R/W) USB transmit-packet count. Specifies the number of packets that must be in the TXFIFO + before the core can start transmission for the corresponding USB transaction (burst). This + field is only valid when [USBTXPKTCNTSEL] = 1. Valid values are from 0x1 to 0xF. + This field must be \<= [USBMAXTXBURSTSIZE]. */ + uint32_t usbmaxtxburstsize : 8; /**< [ 23: 16](R/W) USB maximum TX burst size. When [USBTXPKTCNTSEL] = 1, this field specifies the + maximum bulk OUT burst the core should do. When the system bus is slower than + the USB, TX FIFO can underrun during a long burst. Program a smaller value to + this field to limit the TX burst size that the core can do. It only applies to + SuperSpeed bulk, isochronous, and interrupt OUT endpoints in the host + mode. Valid values are from 0x1 to 0x10. */ + uint32_t reserved_14_15 : 2; + uint32_t reserved_10_13 : 4; + uint32_t reserved_0_9 : 10; +#else /* Word 0 - Little Endian */ + uint32_t reserved_0_9 : 10; + uint32_t reserved_10_13 : 4; + uint32_t reserved_14_15 : 2; + uint32_t usbmaxtxburstsize : 8; /**< [ 23: 16](R/W) USB maximum TX burst size. When [USBTXPKTCNTSEL] = 1, this field specifies the + maximum bulk OUT burst the core should do. When the system bus is slower than + the USB, TX FIFO can underrun during a long burst. Program a smaller value to + this field to limit the TX burst size that the core can do. It only applies to + SuperSpeed bulk, isochronous, and interrupt OUT endpoints in the host + mode. Valid values are from 0x1 to 0x10. */ + uint32_t usbtxpktcnt : 4; /**< [ 27: 24](R/W) USB transmit-packet count. Specifies the number of packets that must be in the TXFIFO + before the core can start transmission for the corresponding USB transaction (burst). This + field is only valid when [USBTXPKTCNTSEL] = 1. Valid values are from 0x1 to 0xF. + This field must be \<= [USBMAXTXBURSTSIZE]. */ + uint32_t reserved_28 : 1; + uint32_t usbtxpktcntsel : 1; /**< [ 29: 29](R/W) USB transmit packet-count enable. Enables/disables the USB transmission multipacket + thresholding: + 0 = USB transmission multipacket thresholding is disabled, the core can only start + transmission on the USB after the entire packet has been fetched into the corresponding + TXFIFO. + 1 = USB transmission multipacket thresholding is enabled. The core can only start + transmission on the USB after USBTXPKTCNT amount of packets for the USB transaction + (burst) are already in the corresponding TXFIFO. + This mode is only used for SuperSpeed. */ + uint32_t reserved_30_31 : 2; +#endif /* Word 0 - End */ + } cn; +}; +typedef union bdk_usbhx_uahc_gtxthrcfg bdk_usbhx_uahc_gtxthrcfg_t; + +static inline uint64_t BDK_USBHX_UAHC_GTXTHRCFG(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GTXTHRCFG(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c108ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GTXTHRCFG", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GTXTHRCFG(a) bdk_usbhx_uahc_gtxthrcfg_t +#define bustype_BDK_USBHX_UAHC_GTXTHRCFG(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GTXTHRCFG(a) "USBHX_UAHC_GTXTHRCFG" +#define device_bar_BDK_USBHX_UAHC_GTXTHRCFG(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GTXTHRCFG(a) (a) +#define arguments_BDK_USBHX_UAHC_GTXTHRCFG(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_guctl + * + * UAHC Core User-Control Register + * This register provides a few options for the software to control the core behavior in the host + * mode. Most of the options are used to improve host inter-operability with different devices. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.11. + */ +union bdk_usbhx_uahc_guctl +{ + uint32_t u; + struct bdk_usbhx_uahc_guctl_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t refclkper : 10; /**< [ 31: 22](R/W) Reference-clock period. Indicates (in terms of ns) the period of REF_CLK. The default + value is set to 0x8 + (8 ns/125 MHz). This field must be updated during power on initialization if + USBH()_UAHC_GCTL[SOFITPSYNC] = 1 or USBH()_UAHC_GFLADJ [GFLADJ_REFCLK_LPM_SEL] = 1. The + programmable maximum value 62 ns, and the minimum value is 8 ns. You use a reference clock + with a period that is a integer multiple, so that ITP can meet the jitter margin of 32 ns. + The allowable REF_CLK frequencies whose period is not integer multiples are + 16/17/19.2/24/39.7 MHz. + + This field should not be set to 0x0 at any time. If you do not plan to use this feature, + then you need to set this field to 0x8, the default value. */ + uint32_t noextrdl : 1; /**< [ 21: 21](R/W) No extra delay between SOF and the first packet. + Some high-speed devices misbehave when the host sends a packet immediately after an SOF. + However, adding an extra delay between an SOF and the first packet can reduce the USB data + rate and performance. + + This bit is used to control whether the host should wait for 2 us before it sends the + first packet after a SOF, or not. You can set this bit to 1 to improve the performance if + those problematic devices are not a concern in your host environment. + 0 = host waits for 2 us after an SOF before it sends the first USB packet. + 1 = host does not wait after an SOF before it sends the first USB packet. */ + uint32_t psqextrressp : 3; /**< [ 20: 18](R/W) PSQ extra reserved space. This is a debug feature, and is not intended for normal usage. + This parameter specifies how much additional space in the PSQ (protocol-status queue) must + be reserved before the U3PTL initiates a new USB transaction and burst beats. */ + uint32_t sprsctrltransen : 1; /**< [ 17: 17](R/W) Sparse control transaction enable. Some devices are slow in responding to control + transfers. Scheduling multiple transactions in one microframe/frame can cause these + devices to misbehave. If this bit is set to 1, the host controller schedules transactions + for a control transfer in different microframes/frames. */ + uint32_t resbwhseps : 1; /**< [ 16: 16](R/W) Reserving 85% bandwidth for high-speed periodic EPs. By default, host controller reserves + 80% of the bandwidth for periodic EPs. If this bit is set, the bandwidth is relaxed to 85% + to accommodate two high-speed, high-bandwidth ISOC EPs. + + USB 2.0 required 80% bandwidth allocated for ISOC traffic. If two high bandwidth ISOC + devices (HD webcams) are connected, and if each requires 1024-bytes * 3 packets per + microframe, then the bandwidth required is around 82%. If this bit is set to 1, it is + possible to connect two webcams of 1024 bytes * 3 payload per microframe each. Otherwise, + you may have to reduce the resolution of the webcams. */ + uint32_t cmdevaddr : 1; /**< [ 15: 15](R/W) Compliance mode for device address. When set to 1, slot ID can have different value than + device address if max_slot_enabled \< 128. + 0 = Device address is equal to slot ID. + 1 = Increment device address on each address device command. + + The xHCI compliance requires this bit to be set to 1. The 0 mode is for debug purpose + only. This allows you to easily identify a device connected to a port in the Lecroy or + Eliisys trace during hardware debug. */ + uint32_t usbhstinautoretryen : 1; /**< [ 14: 14](R/W) Host IN auto-retry enable. When set, this field enables the auto-retry feature. For IN + transfers (non-isochronous) that encounter data packets with CRC errors or internal + overrun scenarios, the auto-retry feature causes the host core to reply to the device with + a non-terminating retry ACK (i.e. an ACK transaction packet with Retry = 1 and NumP != 0). + If the auto-retry feature is disabled (default), the core responds with a terminating + retry ACK (i.e. an ACK transaction packet with Retry = 1 and NumP = 0). */ + uint32_t enoverlapchk : 1; /**< [ 13: 13](R/W) Enable check for LFPS overlap during remote Ux Exit. If this bit is set to: + 0 = When the link exists U1/U2/U3 because of a remote exit, it does not look for an LFPS + overlap. + 1 = The SuperSpeed link, when exiting U1/U2/U3, waits for either the remote link LFPS or + TS1/TS2 training symbols before it confirms that the LFPS handshake is complete. This is + done to handle the case where the LFPS glitch causes the link to start exiting from the + low power state. Looking for the LFPS overlap makes sure that the link partner also sees + the LFPS. */ + uint32_t extcapsupten : 1; /**< [ 12: 12](R/W) External extended capability support enable. If disabled, a read USBH()_UAHC_SUPTPRT3_DW0 + [NEXTCAPPTR] returns 0 in the next capability pointer field. This indicates there are no + more capabilities. If enabled, a read to USBH()_UAHC_SUPTPRT3_DW0[NEXTCAPPTR] returns 4 in + the + next capability pointer field. + Always set to 0x0. */ + uint32_t insrtextrfsbodi : 1; /**< [ 11: 11](R/W) Insert extra delay between full-speed bulk OUT transactions. Some full-speed devices are + slow to receive bulk OUT data and can get stuck when there are consecutive bulk OUT + transactions with short inter-transaction delays. This bit is used to control whether the + host inserts extra delay between consecutive bulk OUT transactions to a full-speed + endpoint. + 0 = Host does not insert extra delay. + Setting this bit to 1 reduces the bulk OUT transfer performance for most of the full-speed + devices. + 1 = Host inserts about 12 us extra delay between consecutive bulk OUT transactions to an + full-speed endpoint to work around the device issue. */ + uint32_t dtct : 2; /**< [ 10: 9](R/W) Device timeout coarse tuning. This field determines how long the host waits for a response + from device before considering a timeout. + The core first checks the [DTCT] value. If it is 0, then the timeout value is defined by + the + [DTFT]. If it is nonzero, then it uses the following timeout values: + 0x0 = 0 us; use [DTFT] value instead. + 0x1 = 500 us. + 0x2 = 1.5 ms. + 0x3 = 6.5 ms. */ + uint32_t dtft : 9; /**< [ 8: 0](R/W) Device timeout fine tuning. This field determines how long the host waits for a response + from a device before considering a timeout. For [DTFT] to take effect, [DTCT] must be set + to + 0x0. + The [DTFT] value specifies the number of 125 MHz clock cycles * 256 to count before + considering a device timeout. For the 125 MHz clock cycles (8 ns period), this is + calculated as follows: + _ [DTFT value] * 256 * 8 (ns) + 0x2 = 2 * 256 * 8 -\> 4 us. + 0x5 = 5 * 256 * 8 -\> 10 us. + 0xA = 10 * 256 * 8 -\> 20 us. + 0x10 = 16 * 256 * 8 -\> 32 us. + 0x19 = 25 * 256 * 8 -\> 51 us. + 0x31 = 49 * 256 * 8 -\> 100 us. + 0x62 = 98 * 256 * 8 -\> 200 us. */ +#else /* Word 0 - Little Endian */ + uint32_t dtft : 9; /**< [ 8: 0](R/W) Device timeout fine tuning. This field determines how long the host waits for a response + from a device before considering a timeout. For [DTFT] to take effect, [DTCT] must be set + to + 0x0. + The [DTFT] value specifies the number of 125 MHz clock cycles * 256 to count before + considering a device timeout. For the 125 MHz clock cycles (8 ns period), this is + calculated as follows: + _ [DTFT value] * 256 * 8 (ns) + 0x2 = 2 * 256 * 8 -\> 4 us. + 0x5 = 5 * 256 * 8 -\> 10 us. + 0xA = 10 * 256 * 8 -\> 20 us. + 0x10 = 16 * 256 * 8 -\> 32 us. + 0x19 = 25 * 256 * 8 -\> 51 us. + 0x31 = 49 * 256 * 8 -\> 100 us. + 0x62 = 98 * 256 * 8 -\> 200 us. */ + uint32_t dtct : 2; /**< [ 10: 9](R/W) Device timeout coarse tuning. This field determines how long the host waits for a response + from device before considering a timeout. + The core first checks the [DTCT] value. If it is 0, then the timeout value is defined by + the + [DTFT]. If it is nonzero, then it uses the following timeout values: + 0x0 = 0 us; use [DTFT] value instead. + 0x1 = 500 us. + 0x2 = 1.5 ms. + 0x3 = 6.5 ms. */ + uint32_t insrtextrfsbodi : 1; /**< [ 11: 11](R/W) Insert extra delay between full-speed bulk OUT transactions. Some full-speed devices are + slow to receive bulk OUT data and can get stuck when there are consecutive bulk OUT + transactions with short inter-transaction delays. This bit is used to control whether the + host inserts extra delay between consecutive bulk OUT transactions to a full-speed + endpoint. + 0 = Host does not insert extra delay. + Setting this bit to 1 reduces the bulk OUT transfer performance for most of the full-speed + devices. + 1 = Host inserts about 12 us extra delay between consecutive bulk OUT transactions to an + full-speed endpoint to work around the device issue. */ + uint32_t extcapsupten : 1; /**< [ 12: 12](R/W) External extended capability support enable. If disabled, a read USBH()_UAHC_SUPTPRT3_DW0 + [NEXTCAPPTR] returns 0 in the next capability pointer field. This indicates there are no + more capabilities. If enabled, a read to USBH()_UAHC_SUPTPRT3_DW0[NEXTCAPPTR] returns 4 in + the + next capability pointer field. + Always set to 0x0. */ + uint32_t enoverlapchk : 1; /**< [ 13: 13](R/W) Enable check for LFPS overlap during remote Ux Exit. If this bit is set to: + 0 = When the link exists U1/U2/U3 because of a remote exit, it does not look for an LFPS + overlap. + 1 = The SuperSpeed link, when exiting U1/U2/U3, waits for either the remote link LFPS or + TS1/TS2 training symbols before it confirms that the LFPS handshake is complete. This is + done to handle the case where the LFPS glitch causes the link to start exiting from the + low power state. Looking for the LFPS overlap makes sure that the link partner also sees + the LFPS. */ + uint32_t usbhstinautoretryen : 1; /**< [ 14: 14](R/W) Host IN auto-retry enable. When set, this field enables the auto-retry feature. For IN + transfers (non-isochronous) that encounter data packets with CRC errors or internal + overrun scenarios, the auto-retry feature causes the host core to reply to the device with + a non-terminating retry ACK (i.e. an ACK transaction packet with Retry = 1 and NumP != 0). + If the auto-retry feature is disabled (default), the core responds with a terminating + retry ACK (i.e. an ACK transaction packet with Retry = 1 and NumP = 0). */ + uint32_t cmdevaddr : 1; /**< [ 15: 15](R/W) Compliance mode for device address. When set to 1, slot ID can have different value than + device address if max_slot_enabled \< 128. + 0 = Device address is equal to slot ID. + 1 = Increment device address on each address device command. + + The xHCI compliance requires this bit to be set to 1. The 0 mode is for debug purpose + only. This allows you to easily identify a device connected to a port in the Lecroy or + Eliisys trace during hardware debug. */ + uint32_t resbwhseps : 1; /**< [ 16: 16](R/W) Reserving 85% bandwidth for high-speed periodic EPs. By default, host controller reserves + 80% of the bandwidth for periodic EPs. If this bit is set, the bandwidth is relaxed to 85% + to accommodate two high-speed, high-bandwidth ISOC EPs. + + USB 2.0 required 80% bandwidth allocated for ISOC traffic. If two high bandwidth ISOC + devices (HD webcams) are connected, and if each requires 1024-bytes * 3 packets per + microframe, then the bandwidth required is around 82%. If this bit is set to 1, it is + possible to connect two webcams of 1024 bytes * 3 payload per microframe each. Otherwise, + you may have to reduce the resolution of the webcams. */ + uint32_t sprsctrltransen : 1; /**< [ 17: 17](R/W) Sparse control transaction enable. Some devices are slow in responding to control + transfers. Scheduling multiple transactions in one microframe/frame can cause these + devices to misbehave. If this bit is set to 1, the host controller schedules transactions + for a control transfer in different microframes/frames. */ + uint32_t psqextrressp : 3; /**< [ 20: 18](R/W) PSQ extra reserved space. This is a debug feature, and is not intended for normal usage. + This parameter specifies how much additional space in the PSQ (protocol-status queue) must + be reserved before the U3PTL initiates a new USB transaction and burst beats. */ + uint32_t noextrdl : 1; /**< [ 21: 21](R/W) No extra delay between SOF and the first packet. + Some high-speed devices misbehave when the host sends a packet immediately after an SOF. + However, adding an extra delay between an SOF and the first packet can reduce the USB data + rate and performance. + + This bit is used to control whether the host should wait for 2 us before it sends the + first packet after a SOF, or not. You can set this bit to 1 to improve the performance if + those problematic devices are not a concern in your host environment. + 0 = host waits for 2 us after an SOF before it sends the first USB packet. + 1 = host does not wait after an SOF before it sends the first USB packet. */ + uint32_t refclkper : 10; /**< [ 31: 22](R/W) Reference-clock period. Indicates (in terms of ns) the period of REF_CLK. The default + value is set to 0x8 + (8 ns/125 MHz). This field must be updated during power on initialization if + USBH()_UAHC_GCTL[SOFITPSYNC] = 1 or USBH()_UAHC_GFLADJ [GFLADJ_REFCLK_LPM_SEL] = 1. The + programmable maximum value 62 ns, and the minimum value is 8 ns. You use a reference clock + with a period that is a integer multiple, so that ITP can meet the jitter margin of 32 ns. + The allowable REF_CLK frequencies whose period is not integer multiples are + 16/17/19.2/24/39.7 MHz. + + This field should not be set to 0x0 at any time. If you do not plan to use this feature, + then you need to set this field to 0x8, the default value. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_guctl_s cn; */ +}; +typedef union bdk_usbhx_uahc_guctl bdk_usbhx_uahc_guctl_t; + +static inline uint64_t BDK_USBHX_UAHC_GUCTL(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GUCTL(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c12cll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GUCTL", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GUCTL(a) bdk_usbhx_uahc_guctl_t +#define bustype_BDK_USBHX_UAHC_GUCTL(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GUCTL(a) "USBHX_UAHC_GUCTL" +#define device_bar_BDK_USBHX_UAHC_GUCTL(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GUCTL(a) (a) +#define arguments_BDK_USBHX_UAHC_GUCTL(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_guctl1 + * + * UAHC Global User Control Register 1 + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.7. + */ +union bdk_usbhx_uahc_guctl1 +{ + uint32_t u; + struct bdk_usbhx_uahc_guctl1_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_18_31 : 14; + uint32_t parkmode_disable_ss : 1; /**< [ 17: 17](R/W) This bit is for debug purpose only. + When this bit is set to 1 all SS bus instances in park mode are + disabled. */ + uint32_t parkmode_disable_hs : 1; /**< [ 16: 16](R/W) When this bit is set to 1 all HS bus instances park mode are + disabled. */ + uint32_t parkmode_disable_fsls : 1; /**< [ 15: 15](R/W) When this bit is set to 1 all FS/LS bus instances park mode are + disabled. */ + uint32_t reserved_9_14 : 6; + uint32_t l1_susp_thrld_en_for_host : 1;/**< [ 8: 8](R/W) The controller puts the PHY into deep low-power mode in L1 when both of the + following are true: + + * The HIRD/BESL value used is greater than or equal to the + value in [L1_SUSP_THRLD_FOR_HOST]. + * The [L1_SUSP_THRLD_EN_FOR_HOST] bit is set. + + The controller the UTMI PHY transitions to shallow low-power + mode in L1 by powering down necessary blocks when one of the + following is true: + + * The HIRD/BESL value used is less than the value in + [L1_SUSP_THRLD_FOR_HOST]. + * [L1_SUSP_THRLD_EN_FOR_HOST] is clear. */ + uint32_t l1_susp_thrld_for_host : 4; /**< [ 7: 4](R/W) This field is effective only when the [L1_SUSP_THRLD_EN_FOR_HOST] is set to 1. */ + uint32_t helden : 1; /**< [ 3: 3](R/W) When this bit is set to 1, it enables the exit latency delta (ELD) + support defined in the xHCI 1.0 Errata. */ + uint32_t hparchkdisable : 1; /**< [ 2: 2](R/W) When this bit is set to 0 (by default), the xHC checks that the input + slot/EP context fields comply to the xHCI Specification. Upon + detection of a parameter error during command execution, the + xHC generates an event TRB with completion code indicating + 'PARAMETER ERROR'. + When the bit is set to 1, the xHC does not perform parameter + checks and does not generate 'PARAMETER ERROR' completion + code. */ + uint32_t ovrld_l1_susp_com : 1; /**< [ 1: 1](R/W) Always set to 0. */ + uint32_t loa_filter_en : 1; /**< [ 0: 0](R/W) If this bit is set, the USB 2.0 port babble is checked at least three consecutive times + before the port is disabled. This prevents false triggering of the babble condition when + using low quality cables. */ +#else /* Word 0 - Little Endian */ + uint32_t loa_filter_en : 1; /**< [ 0: 0](R/W) If this bit is set, the USB 2.0 port babble is checked at least three consecutive times + before the port is disabled. This prevents false triggering of the babble condition when + using low quality cables. */ + uint32_t ovrld_l1_susp_com : 1; /**< [ 1: 1](R/W) Always set to 0. */ + uint32_t hparchkdisable : 1; /**< [ 2: 2](R/W) When this bit is set to 0 (by default), the xHC checks that the input + slot/EP context fields comply to the xHCI Specification. Upon + detection of a parameter error during command execution, the + xHC generates an event TRB with completion code indicating + 'PARAMETER ERROR'. + When the bit is set to 1, the xHC does not perform parameter + checks and does not generate 'PARAMETER ERROR' completion + code. */ + uint32_t helden : 1; /**< [ 3: 3](R/W) When this bit is set to 1, it enables the exit latency delta (ELD) + support defined in the xHCI 1.0 Errata. */ + uint32_t l1_susp_thrld_for_host : 4; /**< [ 7: 4](R/W) This field is effective only when the [L1_SUSP_THRLD_EN_FOR_HOST] is set to 1. */ + uint32_t l1_susp_thrld_en_for_host : 1;/**< [ 8: 8](R/W) The controller puts the PHY into deep low-power mode in L1 when both of the + following are true: + + * The HIRD/BESL value used is greater than or equal to the + value in [L1_SUSP_THRLD_FOR_HOST]. + * The [L1_SUSP_THRLD_EN_FOR_HOST] bit is set. + + The controller the UTMI PHY transitions to shallow low-power + mode in L1 by powering down necessary blocks when one of the + following is true: + + * The HIRD/BESL value used is less than the value in + [L1_SUSP_THRLD_FOR_HOST]. + * [L1_SUSP_THRLD_EN_FOR_HOST] is clear. */ + uint32_t reserved_9_14 : 6; + uint32_t parkmode_disable_fsls : 1; /**< [ 15: 15](R/W) When this bit is set to 1 all FS/LS bus instances park mode are + disabled. */ + uint32_t parkmode_disable_hs : 1; /**< [ 16: 16](R/W) When this bit is set to 1 all HS bus instances park mode are + disabled. */ + uint32_t parkmode_disable_ss : 1; /**< [ 17: 17](R/W) This bit is for debug purpose only. + When this bit is set to 1 all SS bus instances in park mode are + disabled. */ + uint32_t reserved_18_31 : 14; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_guctl1_s cn; */ +}; +typedef union bdk_usbhx_uahc_guctl1 bdk_usbhx_uahc_guctl1_t; + +static inline uint64_t BDK_USBHX_UAHC_GUCTL1(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GUCTL1(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c11cll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GUCTL1", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GUCTL1(a) bdk_usbhx_uahc_guctl1_t +#define bustype_BDK_USBHX_UAHC_GUCTL1(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GUCTL1(a) "USBHX_UAHC_GUCTL1" +#define device_bar_BDK_USBHX_UAHC_GUCTL1(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GUCTL1(a) (a) +#define arguments_BDK_USBHX_UAHC_GUCTL1(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_guid + * + * UAHC Core User ID Register + * This is a read/write register containing the User ID. The power-on value for this register is + * specified as the user identification register. This register can be used in the following + * ways: + * * To store the version or revision of your system. + * * To store hardware configurations that are outside of the core. + * * As a scratch register. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.50a, section 6.2.1.10. + */ +union bdk_usbhx_uahc_guid +{ + uint32_t u; + struct bdk_usbhx_uahc_guid_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t userid : 32; /**< [ 31: 0](R/W) User ID. Application-programmable ID field. */ +#else /* Word 0 - Little Endian */ + uint32_t userid : 32; /**< [ 31: 0](R/W) User ID. Application-programmable ID field. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_guid_s cn; */ +}; +typedef union bdk_usbhx_uahc_guid bdk_usbhx_uahc_guid_t; + +static inline uint64_t BDK_USBHX_UAHC_GUID(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GUID(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000c128ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_GUID", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GUID(a) bdk_usbhx_uahc_guid_t +#define bustype_BDK_USBHX_UAHC_GUID(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GUID(a) "USBHX_UAHC_GUID" +#define device_bar_BDK_USBHX_UAHC_GUID(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GUID(a) (a) +#define arguments_BDK_USBHX_UAHC_GUID(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gusb2i2cctl# + * + * UAHC USB2 I2C Control Register + * This register is reserved for future use. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.20a, section 6.2.5.2. + */ +union bdk_usbhx_uahc_gusb2i2cctlx +{ + uint32_t u; + struct bdk_usbhx_uahc_gusb2i2cctlx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_0_31 : 32; +#else /* Word 0 - Little Endian */ + uint32_t reserved_0_31 : 32; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gusb2i2cctlx_s cn; */ +}; +typedef union bdk_usbhx_uahc_gusb2i2cctlx bdk_usbhx_uahc_gusb2i2cctlx_t; + +static inline uint64_t BDK_USBHX_UAHC_GUSB2I2CCTLX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GUSB2I2CCTLX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x86800000c240ll + 0x1000000000ll * ((a) & 0x1) + 4ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UAHC_GUSB2I2CCTLX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GUSB2I2CCTLX(a,b) bdk_usbhx_uahc_gusb2i2cctlx_t +#define bustype_BDK_USBHX_UAHC_GUSB2I2CCTLX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GUSB2I2CCTLX(a,b) "USBHX_UAHC_GUSB2I2CCTLX" +#define device_bar_BDK_USBHX_UAHC_GUSB2I2CCTLX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GUSB2I2CCTLX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_GUSB2I2CCTLX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gusb2phycfg# + * + * UAHC USB2 PHY-Configuration Register + * This register is used to configure the core after power-on. It contains USB 2.0 and USB 2.0 + * PHY-related configuration parameters. The application must program this register before + * starting any transactions on either the SoC bus or the USB. Per-port registers are + * implemented. + * + * Do not make changes to this register after the initial programming. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.20a, section 6.2.5.1. + */ +union bdk_usbhx_uahc_gusb2phycfgx +{ + uint32_t u; + struct bdk_usbhx_uahc_gusb2phycfgx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t physoftrst : 1; /**< [ 31: 31](R/W) PHY soft reset. Causes the usb2phy_reset signal to be asserted to reset a UTMI PHY. */ + uint32_t u2_freeclk_exists : 1; /**< [ 30: 30](R/W) Specifies whether your USB 2.0 PHY provides a free-running PHY clock, which is active when + the clock control input is active. If your USB 2.0 PHY provides a free-running PHY clock, + it must be connected to the utmi_clk[0] input. The remaining utmi_clk[n] must be connected + to the respective port clocks. The core uses the Port-0 clock for generating the internal + mac2 clock. + 0 = USB 2.0 free clock does not exist. + 1 = USB 2.0 free clock exists. + + This field must be set to zero if you enable ITP generation based on the REF_CLK + counter, USBH()_UAHC_GCTL[SOFITPSYNC] = 1, or USBH()_UAHC_GFLADJ [GFLADJ_REFCLK_LPM_SEL] = + 1. */ + uint32_t ulpi_lpm_with_opmode_chk : 1;/**< [ 29: 29](R/W) Support the LPM over ULPI without NOPID token to the ULPI PHY. Always 0x0. */ + uint32_t hsic_con_width_adj : 2; /**< [ 28: 27](RO) This bit is used in the HSIC device mode of operation. Always 0x0 */ + uint32_t inv_sel_hsic : 1; /**< [ 26: 26](RO) The application driver uses this bit to control the HSIC enable/disable function. */ + uint32_t reserved_19_25 : 7; + uint32_t ulpiextvbusindicator : 1; /**< [ 18: 18](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiextvbusdrv : 1; /**< [ 17: 17](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiclksusm : 1; /**< [ 16: 16](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiautores : 1; /**< [ 15: 15](R/W) Reserved (unused in this configuration). */ + uint32_t reserved_14 : 1; + uint32_t usbtrdtim : 4; /**< [ 13: 10](R/W) USB 2.0 turnaround time. Sets the turnaround time in PHY clock cycles. Specifies the + response time for a MAC request to the packet FIFO controller (PFC) to fetch data from the + DFIFO (SPRAM). + USB turnaround time is a critical certification criteria when using long cables and five + hub levels. + When the MAC interface is 8-bit UTMI+/ULPI, the required values for this field is 0x9. */ + uint32_t reserved_9 : 1; + uint32_t enblslpm : 1; /**< [ 8: 8](R/W) Enable utmi_sleep_n and utmi_l1_suspend_n. The application uses this field to control + utmi_sleep_n and utmi_l1_suspend_n assertion to the PHY in the L1 state. + 0 = utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferred to the + external PHY. + 1 = utmi_sleep_n and utmi_l1_suspend_n assertion from the core is transferred to the + external PHY. + + When hardware LPM is enabled, this bit should be set high for Port0. */ + uint32_t physel : 1; /**< [ 7: 7](WO) USB 2.0 high-speed PHY or USB 1.1 full-speed serial transceiver select. */ + uint32_t susphy : 1; /**< [ 6: 6](R/W) Suspend USB2.0 high-speed/full-speed/low-speed PHY. When set, USB2.0 PHY enters suspend + mode if suspend conditions are valid. */ + uint32_t fsintf : 1; /**< [ 5: 5](RO) Full-speed serial-interface select. Always reads as 0x0. */ + uint32_t ulpi_utmi_sel : 1; /**< [ 4: 4](RO) ULPI or UTMI+ select. Always reads as 0x0, indicating UTMI+. */ + uint32_t phyif : 1; /**< [ 3: 3](R/W) PHY interface width: 1 = 16-bit, 0 = 8-bit. + All the enabled 2.0 ports should have the same clock frequency as Port0 clock frequency + (utmi_clk[0]). + The UTMI 8-bit and 16-bit modes cannot be used together for different ports at the same + time (i.e., all the ports should be in 8-bit mode, or all of them should be in 16-bit + mode). */ + uint32_t toutcal : 3; /**< [ 2: 0](R/W) High-speed/full-speed timeout calibration. + The number of PHY clock cycles, as indicated by the application in this field, is + multiplied by a bit-time factor; this factor is added to the high-speed/full-speed + interpacket timeout duration in the core to account for additional delays introduced by + the PHY. This might be required, since the delay introduced by the PHY in generating the + linestate condition can vary among PHYs. + + The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit + times. The USB standard timeout value for full-speed operation is 16 to 18 (inclusive) bit + times. The application must program this field based on the speed of connection. + + The number of bit times added per PHY clock are: + * High-speed operation: + _ one 30-MHz PHY clock = 16 bit times. + _ one 60-MHz PHY clock = 8 bit times. + + * Full-speed operation: + _ one 30-MHz PHY clock = 0.4 bit times. + _ one 60-MHz PHY clock = 0.2 bit times. + _ one 48-MHz PHY clock = 0.25 bit times. */ +#else /* Word 0 - Little Endian */ + uint32_t toutcal : 3; /**< [ 2: 0](R/W) High-speed/full-speed timeout calibration. + The number of PHY clock cycles, as indicated by the application in this field, is + multiplied by a bit-time factor; this factor is added to the high-speed/full-speed + interpacket timeout duration in the core to account for additional delays introduced by + the PHY. This might be required, since the delay introduced by the PHY in generating the + linestate condition can vary among PHYs. + + The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit + times. The USB standard timeout value for full-speed operation is 16 to 18 (inclusive) bit + times. The application must program this field based on the speed of connection. + + The number of bit times added per PHY clock are: + * High-speed operation: + _ one 30-MHz PHY clock = 16 bit times. + _ one 60-MHz PHY clock = 8 bit times. + + * Full-speed operation: + _ one 30-MHz PHY clock = 0.4 bit times. + _ one 60-MHz PHY clock = 0.2 bit times. + _ one 48-MHz PHY clock = 0.25 bit times. */ + uint32_t phyif : 1; /**< [ 3: 3](R/W) PHY interface width: 1 = 16-bit, 0 = 8-bit. + All the enabled 2.0 ports should have the same clock frequency as Port0 clock frequency + (utmi_clk[0]). + The UTMI 8-bit and 16-bit modes cannot be used together for different ports at the same + time (i.e., all the ports should be in 8-bit mode, or all of them should be in 16-bit + mode). */ + uint32_t ulpi_utmi_sel : 1; /**< [ 4: 4](RO) ULPI or UTMI+ select. Always reads as 0x0, indicating UTMI+. */ + uint32_t fsintf : 1; /**< [ 5: 5](RO) Full-speed serial-interface select. Always reads as 0x0. */ + uint32_t susphy : 1; /**< [ 6: 6](R/W) Suspend USB2.0 high-speed/full-speed/low-speed PHY. When set, USB2.0 PHY enters suspend + mode if suspend conditions are valid. */ + uint32_t physel : 1; /**< [ 7: 7](WO) USB 2.0 high-speed PHY or USB 1.1 full-speed serial transceiver select. */ + uint32_t enblslpm : 1; /**< [ 8: 8](R/W) Enable utmi_sleep_n and utmi_l1_suspend_n. The application uses this field to control + utmi_sleep_n and utmi_l1_suspend_n assertion to the PHY in the L1 state. + 0 = utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferred to the + external PHY. + 1 = utmi_sleep_n and utmi_l1_suspend_n assertion from the core is transferred to the + external PHY. + + When hardware LPM is enabled, this bit should be set high for Port0. */ + uint32_t reserved_9 : 1; + uint32_t usbtrdtim : 4; /**< [ 13: 10](R/W) USB 2.0 turnaround time. Sets the turnaround time in PHY clock cycles. Specifies the + response time for a MAC request to the packet FIFO controller (PFC) to fetch data from the + DFIFO (SPRAM). + USB turnaround time is a critical certification criteria when using long cables and five + hub levels. + When the MAC interface is 8-bit UTMI+/ULPI, the required values for this field is 0x9. */ + uint32_t reserved_14 : 1; + uint32_t ulpiautores : 1; /**< [ 15: 15](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiclksusm : 1; /**< [ 16: 16](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiextvbusdrv : 1; /**< [ 17: 17](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiextvbusindicator : 1; /**< [ 18: 18](R/W) Reserved (unused in this configuration). */ + uint32_t reserved_19_25 : 7; + uint32_t inv_sel_hsic : 1; /**< [ 26: 26](RO) The application driver uses this bit to control the HSIC enable/disable function. */ + uint32_t hsic_con_width_adj : 2; /**< [ 28: 27](RO) This bit is used in the HSIC device mode of operation. Always 0x0 */ + uint32_t ulpi_lpm_with_opmode_chk : 1;/**< [ 29: 29](R/W) Support the LPM over ULPI without NOPID token to the ULPI PHY. Always 0x0. */ + uint32_t u2_freeclk_exists : 1; /**< [ 30: 30](R/W) Specifies whether your USB 2.0 PHY provides a free-running PHY clock, which is active when + the clock control input is active. If your USB 2.0 PHY provides a free-running PHY clock, + it must be connected to the utmi_clk[0] input. The remaining utmi_clk[n] must be connected + to the respective port clocks. The core uses the Port-0 clock for generating the internal + mac2 clock. + 0 = USB 2.0 free clock does not exist. + 1 = USB 2.0 free clock exists. + + This field must be set to zero if you enable ITP generation based on the REF_CLK + counter, USBH()_UAHC_GCTL[SOFITPSYNC] = 1, or USBH()_UAHC_GFLADJ [GFLADJ_REFCLK_LPM_SEL] = + 1. */ + uint32_t physoftrst : 1; /**< [ 31: 31](R/W) PHY soft reset. Causes the usb2phy_reset signal to be asserted to reset a UTMI PHY. */ +#endif /* Word 0 - End */ + } s; + struct bdk_usbhx_uahc_gusb2phycfgx_cn + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t physoftrst : 1; /**< [ 31: 31](R/W) PHY soft reset. Causes the usb2phy_reset signal to be asserted to reset a UTMI PHY. */ + uint32_t u2_freeclk_exists : 1; /**< [ 30: 30](R/W) Specifies whether your USB 2.0 PHY provides a free-running PHY clock, which is active when + the clock control input is active. If your USB 2.0 PHY provides a free-running PHY clock, + it must be connected to the utmi_clk[0] input. The remaining utmi_clk[n] must be connected + to the respective port clocks. The core uses the Port-0 clock for generating the internal + mac2 clock. + 0 = USB 2.0 free clock does not exist. + 1 = USB 2.0 free clock exists. + + This field must be set to zero if you enable ITP generation based on the REF_CLK + counter, USBH()_UAHC_GCTL[SOFITPSYNC] = 1, or USBH()_UAHC_GFLADJ [GFLADJ_REFCLK_LPM_SEL] = + 1. */ + uint32_t ulpi_lpm_with_opmode_chk : 1;/**< [ 29: 29](R/W) Support the LPM over ULPI without NOPID token to the ULPI PHY. Always 0x0. */ + uint32_t hsic_con_width_adj : 2; /**< [ 28: 27](RO) This bit is used in the HSIC device mode of operation. Always 0x0 */ + uint32_t inv_sel_hsic : 1; /**< [ 26: 26](RO) The application driver uses this bit to control the HSIC enable/disable function. */ + uint32_t reserved_25 : 1; + uint32_t reserved_19_24 : 6; + uint32_t ulpiextvbusindicator : 1; /**< [ 18: 18](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiextvbusdrv : 1; /**< [ 17: 17](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiclksusm : 1; /**< [ 16: 16](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiautores : 1; /**< [ 15: 15](R/W) Reserved (unused in this configuration). */ + uint32_t reserved_14 : 1; + uint32_t usbtrdtim : 4; /**< [ 13: 10](R/W) USB 2.0 turnaround time. Sets the turnaround time in PHY clock cycles. Specifies the + response time for a MAC request to the packet FIFO controller (PFC) to fetch data from the + DFIFO (SPRAM). + USB turnaround time is a critical certification criteria when using long cables and five + hub levels. + When the MAC interface is 8-bit UTMI+/ULPI, the required values for this field is 0x9. */ + uint32_t reserved_9 : 1; + uint32_t enblslpm : 1; /**< [ 8: 8](R/W) Enable utmi_sleep_n and utmi_l1_suspend_n. The application uses this field to control + utmi_sleep_n and utmi_l1_suspend_n assertion to the PHY in the L1 state. + 0 = utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferred to the + external PHY. + 1 = utmi_sleep_n and utmi_l1_suspend_n assertion from the core is transferred to the + external PHY. + + When hardware LPM is enabled, this bit should be set high for Port0. */ + uint32_t physel : 1; /**< [ 7: 7](WO) USB 2.0 high-speed PHY or USB 1.1 full-speed serial transceiver select. */ + uint32_t susphy : 1; /**< [ 6: 6](R/W) Suspend USB2.0 high-speed/full-speed/low-speed PHY. When set, USB2.0 PHY enters suspend + mode if suspend conditions are valid. */ + uint32_t fsintf : 1; /**< [ 5: 5](RO) Full-speed serial-interface select. Always reads as 0x0. */ + uint32_t ulpi_utmi_sel : 1; /**< [ 4: 4](RO) ULPI or UTMI+ select. Always reads as 0x0, indicating UTMI+. */ + uint32_t phyif : 1; /**< [ 3: 3](R/W) PHY interface width: 1 = 16-bit, 0 = 8-bit. + All the enabled 2.0 ports should have the same clock frequency as Port0 clock frequency + (utmi_clk[0]). + The UTMI 8-bit and 16-bit modes cannot be used together for different ports at the same + time (i.e., all the ports should be in 8-bit mode, or all of them should be in 16-bit + mode). */ + uint32_t toutcal : 3; /**< [ 2: 0](R/W) High-speed/full-speed timeout calibration. + The number of PHY clock cycles, as indicated by the application in this field, is + multiplied by a bit-time factor; this factor is added to the high-speed/full-speed + interpacket timeout duration in the core to account for additional delays introduced by + the PHY. This might be required, since the delay introduced by the PHY in generating the + linestate condition can vary among PHYs. + + The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit + times. The USB standard timeout value for full-speed operation is 16 to 18 (inclusive) bit + times. The application must program this field based on the speed of connection. + + The number of bit times added per PHY clock are: + * High-speed operation: + _ one 30-MHz PHY clock = 16 bit times. + _ one 60-MHz PHY clock = 8 bit times. + + * Full-speed operation: + _ one 30-MHz PHY clock = 0.4 bit times. + _ one 60-MHz PHY clock = 0.2 bit times. + _ one 48-MHz PHY clock = 0.25 bit times. */ +#else /* Word 0 - Little Endian */ + uint32_t toutcal : 3; /**< [ 2: 0](R/W) High-speed/full-speed timeout calibration. + The number of PHY clock cycles, as indicated by the application in this field, is + multiplied by a bit-time factor; this factor is added to the high-speed/full-speed + interpacket timeout duration in the core to account for additional delays introduced by + the PHY. This might be required, since the delay introduced by the PHY in generating the + linestate condition can vary among PHYs. + + The USB standard timeout value for high-speed operation is 736 to 816 (inclusive) bit + times. The USB standard timeout value for full-speed operation is 16 to 18 (inclusive) bit + times. The application must program this field based on the speed of connection. + + The number of bit times added per PHY clock are: + * High-speed operation: + _ one 30-MHz PHY clock = 16 bit times. + _ one 60-MHz PHY clock = 8 bit times. + + * Full-speed operation: + _ one 30-MHz PHY clock = 0.4 bit times. + _ one 60-MHz PHY clock = 0.2 bit times. + _ one 48-MHz PHY clock = 0.25 bit times. */ + uint32_t phyif : 1; /**< [ 3: 3](R/W) PHY interface width: 1 = 16-bit, 0 = 8-bit. + All the enabled 2.0 ports should have the same clock frequency as Port0 clock frequency + (utmi_clk[0]). + The UTMI 8-bit and 16-bit modes cannot be used together for different ports at the same + time (i.e., all the ports should be in 8-bit mode, or all of them should be in 16-bit + mode). */ + uint32_t ulpi_utmi_sel : 1; /**< [ 4: 4](RO) ULPI or UTMI+ select. Always reads as 0x0, indicating UTMI+. */ + uint32_t fsintf : 1; /**< [ 5: 5](RO) Full-speed serial-interface select. Always reads as 0x0. */ + uint32_t susphy : 1; /**< [ 6: 6](R/W) Suspend USB2.0 high-speed/full-speed/low-speed PHY. When set, USB2.0 PHY enters suspend + mode if suspend conditions are valid. */ + uint32_t physel : 1; /**< [ 7: 7](WO) USB 2.0 high-speed PHY or USB 1.1 full-speed serial transceiver select. */ + uint32_t enblslpm : 1; /**< [ 8: 8](R/W) Enable utmi_sleep_n and utmi_l1_suspend_n. The application uses this field to control + utmi_sleep_n and utmi_l1_suspend_n assertion to the PHY in the L1 state. + 0 = utmi_sleep_n and utmi_l1_suspend_n assertion from the core is not transferred to the + external PHY. + 1 = utmi_sleep_n and utmi_l1_suspend_n assertion from the core is transferred to the + external PHY. + + When hardware LPM is enabled, this bit should be set high for Port0. */ + uint32_t reserved_9 : 1; + uint32_t usbtrdtim : 4; /**< [ 13: 10](R/W) USB 2.0 turnaround time. Sets the turnaround time in PHY clock cycles. Specifies the + response time for a MAC request to the packet FIFO controller (PFC) to fetch data from the + DFIFO (SPRAM). + USB turnaround time is a critical certification criteria when using long cables and five + hub levels. + When the MAC interface is 8-bit UTMI+/ULPI, the required values for this field is 0x9. */ + uint32_t reserved_14 : 1; + uint32_t ulpiautores : 1; /**< [ 15: 15](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiclksusm : 1; /**< [ 16: 16](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiextvbusdrv : 1; /**< [ 17: 17](R/W) Reserved (unused in this configuration). */ + uint32_t ulpiextvbusindicator : 1; /**< [ 18: 18](R/W) Reserved (unused in this configuration). */ + uint32_t reserved_19_24 : 6; + uint32_t reserved_25 : 1; + uint32_t inv_sel_hsic : 1; /**< [ 26: 26](RO) The application driver uses this bit to control the HSIC enable/disable function. */ + uint32_t hsic_con_width_adj : 2; /**< [ 28: 27](RO) This bit is used in the HSIC device mode of operation. Always 0x0 */ + uint32_t ulpi_lpm_with_opmode_chk : 1;/**< [ 29: 29](R/W) Support the LPM over ULPI without NOPID token to the ULPI PHY. Always 0x0. */ + uint32_t u2_freeclk_exists : 1; /**< [ 30: 30](R/W) Specifies whether your USB 2.0 PHY provides a free-running PHY clock, which is active when + the clock control input is active. If your USB 2.0 PHY provides a free-running PHY clock, + it must be connected to the utmi_clk[0] input. The remaining utmi_clk[n] must be connected + to the respective port clocks. The core uses the Port-0 clock for generating the internal + mac2 clock. + 0 = USB 2.0 free clock does not exist. + 1 = USB 2.0 free clock exists. + + This field must be set to zero if you enable ITP generation based on the REF_CLK + counter, USBH()_UAHC_GCTL[SOFITPSYNC] = 1, or USBH()_UAHC_GFLADJ [GFLADJ_REFCLK_LPM_SEL] = + 1. */ + uint32_t physoftrst : 1; /**< [ 31: 31](R/W) PHY soft reset. Causes the usb2phy_reset signal to be asserted to reset a UTMI PHY. */ +#endif /* Word 0 - End */ + } cn; +}; +typedef union bdk_usbhx_uahc_gusb2phycfgx bdk_usbhx_uahc_gusb2phycfgx_t; + +static inline uint64_t BDK_USBHX_UAHC_GUSB2PHYCFGX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GUSB2PHYCFGX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x86800000c200ll + 0x1000000000ll * ((a) & 0x1) + 4ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UAHC_GUSB2PHYCFGX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GUSB2PHYCFGX(a,b) bdk_usbhx_uahc_gusb2phycfgx_t +#define bustype_BDK_USBHX_UAHC_GUSB2PHYCFGX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GUSB2PHYCFGX(a,b) "USBHX_UAHC_GUSB2PHYCFGX" +#define device_bar_BDK_USBHX_UAHC_GUSB2PHYCFGX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GUSB2PHYCFGX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_GUSB2PHYCFGX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_gusb3pipectl# + * + * UAHC USB3 Pipe-Control Register + * This register is used to configure the core after power-on. It contains USB 3.0 and USB 3.0 + * PHY-related configuration parameters. The application must program this register before + * starting any transactions on either the SoC bus or the USB. Per-port registers are + * implemented. + * + * Do not make changes to this register after the initial programming. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UAHC_RST]. + * + * Internal: + * See Synopsys DWC_usb3 Databook v2.20a, section 6.2.5.4. + */ +union bdk_usbhx_uahc_gusb3pipectlx +{ + uint32_t u; + struct bdk_usbhx_uahc_gusb3pipectlx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t physoftrst : 1; /**< [ 31: 31](R/W) USB3 PHY soft reset (PHYSoftRst). When set to 1, initiates a PHY soft reset. After setting + this bit to 1, the software needs to clear this bit. */ + uint32_t hstprtcmpl : 1; /**< [ 30: 30](R/W) Host port compliance. Setting this bit to 1 enables placing the SuperSpeed port link into + a compliance state, which allows testing of the PIPE PHY compliance patterns without + having to have a test fixture on the USB 3.0 cable. By default, this bit should be set to + 0. + + In compliance-lab testing, the SuperSpeed port link enters compliance after failing the + first polling sequence after power on. Set this bit to 0 when you run compliance tests. + + The sequence for using this functionality is as follows: + * Disconnect any plugged-in devices. + * Set USBH()_UAHC_USBCMD[HCRST] = 1 or power-on-chip reset. + * Set USBH()_UAHC_PORTSC()[PP] = 0. + * Set HSTPRTCMPL = 1. This places the link into compliance state. + + To advance the compliance pattern, follow this sequence (toggle HSTPRTCMPL): + * Set HSTPRTCMPL = 0. + * Set HSTPRTCMPL = 1. This advances the link to the next compliance pattern. + + To exit from the compliance state, set USBH()_UAHC_USBCMD[HCRST] = 1 or power-on-chip + reset. */ + uint32_t u2ssinactp3ok : 1; /**< [ 29: 29](R/W) P3 OK for U2/SS.Inactive: + 0 = During link state U2/SS.Inactive, put PHY in P2 (default). + 1 = During link state U2/SS.Inactive, put PHY in P3. */ + uint32_t disrxdetp3 : 1; /**< [ 28: 28](R/W) Disables receiver detection in P3. If PHY is in P3 and the core needs to perform receiver + detection: + 0 = Core performs receiver detection in P3 (default). + 1 = Core changes the PHY power state to P2 and then performs receiver detection. After + receiver detection, core changes PHY power state to P3. */ + uint32_t ux_exit_in_px : 1; /**< [ 27: 27](R/W) UX exit in Px: + 0 = Core does U1/U2/U3 exit in PHY power state P0 (default behavior). + 1 = Core does U1/U2/U3 exit in PHY power state P1/P2/P3 respectively. + + This bit is added for SuperSpeed PHY workaround where SuperSpeed PHY injects a glitch on + pipe3_RxElecIdle while receiving Ux exit LFPS, and pipe3_PowerDown change is in progress. + + Internal: + Note: This bit is used by third-party SuperSpeed PHY. It should be set to 0 for + Synopsys PHY. */ + uint32_t ping_enchance_en : 1; /**< [ 26: 26](R/W) Ping enhancement enable. When set to 1, the downstream-port U1-ping-receive timeout + becomes 500 ms instead of 300 ms. Minimum Ping.LFPS receive duration is 8 ns (one mac3_clk + cycle). This field is valid for the downstream port only. + + Internal: + Note: This bit is used by third-party SuperSpeed PHY. It should be set to 0 for + Synopsys PHY. */ + uint32_t u1u2exitfail_to_recov : 1; /**< [ 25: 25](R/W) U1U2exit fail to recovery. When set to 1, and U1/U2 LFPS handshake fails, the LTSSM + transitions from U1/U2 to recovery instead of SS.inactive. + If recovery fails, then the LTSSM can enter SS.Inactive. This is an enhancement only. It + prevents interoperability issue if the remote link does not do the proper handshake. */ + uint32_t request_p1p2p3 : 1; /**< [ 24: 24](R/W) Always request P1/P2/P3 for U1/U2/U3. + 0 = if immediate Ux exit (remotely initiated, or locally initiated) happens, the core does + not request P1/P2/P3 power state change. + 1 = the core always requests PHY power change from P0 to P1/P2/P3 during U0 to U1/U2/U3 + transition. + + Internal: + Note: This bit should be set to 1 for Synopsys PHY. For third-party SuperSpeed + PHY, check with your PHY vendor. */ + uint32_t startrxdetu3rxdet : 1; /**< [ 23: 23](WO) Start receiver detection in U3/Rx.Detect. + If DISRXDETU3RXDET is set to 1 during reset, and the link is in U3 or Rx.Detect state, the + core starts receiver detection on rising edge of this bit. + This bit is valid for downstream ports only, and this feature must not be enabled for + normal operation. + + Internal: + If have to use this feature, contact Synopsys. */ + uint32_t disrxdetu3rxdet : 1; /**< [ 22: 22](R/W) Disable receiver detection in U3/Rx.Detect. When set to 1, the core does not do receiver + detection in U3 or Rx.Detect state. If STARTRXDETU3RXDET is set to 1 during reset, + receiver detection starts manually. + This bit is valid for downstream ports only, and this feature must not be enabled for + normal operation. + + Internal: + If have to use this feature, contact Synopsys. */ + uint32_t delaypx : 3; /**< [ 21: 19](R/W) Delay P1P2P3. Delay P0 to P1/P2/P3 request when entering U1/U2/U3 until (DELAYPX * 8) + 8B10B error occurs, or Pipe3_RxValid drops to 0. + DELAYPXTRANSENTERUX must reset to 1 to enable this functionality. + + Internal: + Should always be 0x1 for a Synopsys PHY. */ + uint32_t delaypxtransenterux : 1; /**< [ 18: 18](R/W) Delay PHY power change from P0 to P1/P2/P3 when link state changing from U0 to U1/U2/U3 + respectively. + 0 = when entering U1/U2/U3, transition to P1/P2/P3 without checking for Pipe3_RxElecIlde + and pipe3_RxValid. + 1 = when entering U1/U2/U3, delay the transition to P1/P2/P3 until the pipe3 signals, + Pipe3_RxElecIlde is 1 and pipe3_RxValid is 0. + + Internal: + Note: This bit should be set to '1' for Synopsys PHY. It is also used by third- + party SuperSpeed PHY. */ + uint32_t suspend_en : 1; /**< [ 17: 17](R/W) Suspend USB3.0 SuperSpeed PHY (Suspend_en). When set to 1, and if suspend conditions are + valid, the USB 3.0 PHY enters suspend mode. */ + uint32_t datwidth : 2; /**< [ 16: 15](RO) PIPE data width. + 0x0 = 32 bits. + 0x1 = 16 bits. + 0x2 = 8 bits. + 0x3 = reserved. + + One clock cycle after reset, these bits receive the value seen on the pipe3_DataBusWidth. + This will always be 0x0. + + Internal: + The simulation testbench uses the coreConsultant parameter to configure the VIP. + INTERNAL: These bits in the coreConsultant parameter should match your PHY data width and + the pipe3_DataBusWidth port. */ + uint32_t abortrxdetinu2 : 1; /**< [ 14: 14](R/W) Abort RX Detect in U2. When set to 1, and the link state is U2, the core aborts receiver + detection if it receives U2 exit LFPS from the remote link partner. + + This bit is for downstream port only. + + Internal: + Note: This bit is used by third-party SuperSpeed PHY. It should be set to 0 for + Synopsys PHY. */ + uint32_t skiprxdet : 1; /**< [ 13: 13](R/W) Skip RX detect. When set to 1, the core skips RX detection if pipe3_RxElecIdle is low. + Skip is defined as waiting for the appropriate timeout, then repeating the operation. */ + uint32_t lfpsp0algn : 1; /**< [ 12: 12](R/W) LFPS P0 align. When set to 1: + * the core deasserts LFPS transmission on the clock edge that it requests Phy power state + 0 when exiting U1, U2, or U3 low power states. Otherwise, LFPS transmission is asserted + one clock earlier. + * the core requests symbol transmission two pipe3_rx_pclks periods after the PHY asserts + PhyStatus as a result of the PHY switching from P1 or P2 state to P0 state. + For USB 3.0 host, this is not required. */ + uint32_t p3p2tranok : 1; /**< [ 11: 11](R/W) P3 P2 transitions OK. + 0 = P0 is always entered as an intermediate state during transitions between P2 and P3, as + defined in the PIPE3 specification. + 1 = the core transitions directly from Phy power state P2 to P3 or from state P3 to P2. + + According to PIPE3 specification, any direct transition between P3 and P2 is illegal. + + Internal: + This bit is used only for some non-Synopsys PHYs that cannot do LFPS in P3. + INTERNAL: Note: This bit is used by third-party SuperSpeed PHY. It should be set to 0 for + Synopsys PHY. */ + uint32_t p3exsigp2 : 1; /**< [ 10: 10](R/W) P3 exit signal in P2. When set to 1, the core always changes the PHY power state to P2, + before attempting a U3 exit handshake. + + Internal: + Note: This bit is used by third-party SuperSpeed PHY. It should be set to 0 for + Synopsys PHY. */ + uint32_t lfpsfilt : 1; /**< [ 9: 9](R/W) LFPS filter. When set to 1, filter LFPS reception with pipe3_RxValid in PHY power state + P0, ignore LFPS reception from the PHY unless both pipe3_Rxelecidle and pipe3_RxValid are + deasserted. */ + uint32_t rxdet2polllfpsctrl : 1; /**< [ 8: 8](R/W) RX_DETECT to Polling. + 0 = Enables a 400 us delay to start polling LFPS after RX_DETECT. This allows VCM offset + to settle to a proper level. + 1 = Disables the 400 us delay to start polling LFPS after RX_DETECT. */ + uint32_t ssicen : 1; /**< [ 7: 7](R/W) SSIC is not supported. This bit must be set to 0. */ + uint32_t txswing : 1; /**< [ 6: 6](R/W) TX swing. Refer to the PIPE3 specification. */ + uint32_t txmargin : 3; /**< [ 5: 3](R/W) TX margin. Refer to the PIPE3 specification, table 5-3. */ + uint32_t txdeemphasis : 2; /**< [ 2: 1](R/W) TX de-emphasis. The value driven to the PHY is controlled by the LTSSM during USB3 + compliance mode. Refer to the PIPE3 specification, table 5-3. + + Use the following values for the appropriate level of de-emphasis (From pipe3 spec): + 0x0 = -6 dB de-emphasis, use USBH()_UCTL_PORT()_CFG_SS[PCS_TX_DEEMPH_6DB]. + 0x1 = -3.5 dB de-emphasis, use USBH()_UCTL_PORT()_CFG_SS[PCS_TX_DEEMPH_3P5DB]. + 0x2 = No de-emphasis. + 0x3 = Reserved. */ + uint32_t elasticbuffermode : 1; /**< [ 0: 0](R/W) Elastic buffer mode. Refer to the PIPE3 specification, table 5-3. */ +#else /* Word 0 - Little Endian */ + uint32_t elasticbuffermode : 1; /**< [ 0: 0](R/W) Elastic buffer mode. Refer to the PIPE3 specification, table 5-3. */ + uint32_t txdeemphasis : 2; /**< [ 2: 1](R/W) TX de-emphasis. The value driven to the PHY is controlled by the LTSSM during USB3 + compliance mode. Refer to the PIPE3 specification, table 5-3. + + Use the following values for the appropriate level of de-emphasis (From pipe3 spec): + 0x0 = -6 dB de-emphasis, use USBH()_UCTL_PORT()_CFG_SS[PCS_TX_DEEMPH_6DB]. + 0x1 = -3.5 dB de-emphasis, use USBH()_UCTL_PORT()_CFG_SS[PCS_TX_DEEMPH_3P5DB]. + 0x2 = No de-emphasis. + 0x3 = Reserved. */ + uint32_t txmargin : 3; /**< [ 5: 3](R/W) TX margin. Refer to the PIPE3 specification, table 5-3. */ + uint32_t txswing : 1; /**< [ 6: 6](R/W) TX swing. Refer to the PIPE3 specification. */ + uint32_t ssicen : 1; /**< [ 7: 7](R/W) SSIC is not supported. This bit must be set to 0. */ + uint32_t rxdet2polllfpsctrl : 1; /**< [ 8: 8](R/W) RX_DETECT to Polling. + 0 = Enables a 400 us delay to start polling LFPS after RX_DETECT. This allows VCM offset + to settle to a proper level. + 1 = Disables the 400 us delay to start polling LFPS after RX_DETECT. */ + uint32_t lfpsfilt : 1; /**< [ 9: 9](R/W) LFPS filter. When set to 1, filter LFPS reception with pipe3_RxValid in PHY power state + P0, ignore LFPS reception from the PHY unless both pipe3_Rxelecidle and pipe3_RxValid are + deasserted. */ + uint32_t p3exsigp2 : 1; /**< [ 10: 10](R/W) P3 exit signal in P2. When set to 1, the core always changes the PHY power state to P2, + before attempting a U3 exit handshake. + + Internal: + Note: This bit is used by third-party SuperSpeed PHY. It should be set to 0 for + Synopsys PHY. */ + uint32_t p3p2tranok : 1; /**< [ 11: 11](R/W) P3 P2 transitions OK. + 0 = P0 is always entered as an intermediate state during transitions between P2 and P3, as + defined in the PIPE3 specification. + 1 = the core transitions directly from Phy power state P2 to P3 or from state P3 to P2. + + According to PIPE3 specification, any direct transition between P3 and P2 is illegal. + + Internal: + This bit is used only for some non-Synopsys PHYs that cannot do LFPS in P3. + INTERNAL: Note: This bit is used by third-party SuperSpeed PHY. It should be set to 0 for + Synopsys PHY. */ + uint32_t lfpsp0algn : 1; /**< [ 12: 12](R/W) LFPS P0 align. When set to 1: + * the core deasserts LFPS transmission on the clock edge that it requests Phy power state + 0 when exiting U1, U2, or U3 low power states. Otherwise, LFPS transmission is asserted + one clock earlier. + * the core requests symbol transmission two pipe3_rx_pclks periods after the PHY asserts + PhyStatus as a result of the PHY switching from P1 or P2 state to P0 state. + For USB 3.0 host, this is not required. */ + uint32_t skiprxdet : 1; /**< [ 13: 13](R/W) Skip RX detect. When set to 1, the core skips RX detection if pipe3_RxElecIdle is low. + Skip is defined as waiting for the appropriate timeout, then repeating the operation. */ + uint32_t abortrxdetinu2 : 1; /**< [ 14: 14](R/W) Abort RX Detect in U2. When set to 1, and the link state is U2, the core aborts receiver + detection if it receives U2 exit LFPS from the remote link partner. + + This bit is for downstream port only. + + Internal: + Note: This bit is used by third-party SuperSpeed PHY. It should be set to 0 for + Synopsys PHY. */ + uint32_t datwidth : 2; /**< [ 16: 15](RO) PIPE data width. + 0x0 = 32 bits. + 0x1 = 16 bits. + 0x2 = 8 bits. + 0x3 = reserved. + + One clock cycle after reset, these bits receive the value seen on the pipe3_DataBusWidth. + This will always be 0x0. + + Internal: + The simulation testbench uses the coreConsultant parameter to configure the VIP. + INTERNAL: These bits in the coreConsultant parameter should match your PHY data width and + the pipe3_DataBusWidth port. */ + uint32_t suspend_en : 1; /**< [ 17: 17](R/W) Suspend USB3.0 SuperSpeed PHY (Suspend_en). When set to 1, and if suspend conditions are + valid, the USB 3.0 PHY enters suspend mode. */ + uint32_t delaypxtransenterux : 1; /**< [ 18: 18](R/W) Delay PHY power change from P0 to P1/P2/P3 when link state changing from U0 to U1/U2/U3 + respectively. + 0 = when entering U1/U2/U3, transition to P1/P2/P3 without checking for Pipe3_RxElecIlde + and pipe3_RxValid. + 1 = when entering U1/U2/U3, delay the transition to P1/P2/P3 until the pipe3 signals, + Pipe3_RxElecIlde is 1 and pipe3_RxValid is 0. + + Internal: + Note: This bit should be set to '1' for Synopsys PHY. It is also used by third- + party SuperSpeed PHY. */ + uint32_t delaypx : 3; /**< [ 21: 19](R/W) Delay P1P2P3. Delay P0 to P1/P2/P3 request when entering U1/U2/U3 until (DELAYPX * 8) + 8B10B error occurs, or Pipe3_RxValid drops to 0. + DELAYPXTRANSENTERUX must reset to 1 to enable this functionality. + + Internal: + Should always be 0x1 for a Synopsys PHY. */ + uint32_t disrxdetu3rxdet : 1; /**< [ 22: 22](R/W) Disable receiver detection in U3/Rx.Detect. When set to 1, the core does not do receiver + detection in U3 or Rx.Detect state. If STARTRXDETU3RXDET is set to 1 during reset, + receiver detection starts manually. + This bit is valid for downstream ports only, and this feature must not be enabled for + normal operation. + + Internal: + If have to use this feature, contact Synopsys. */ + uint32_t startrxdetu3rxdet : 1; /**< [ 23: 23](WO) Start receiver detection in U3/Rx.Detect. + If DISRXDETU3RXDET is set to 1 during reset, and the link is in U3 or Rx.Detect state, the + core starts receiver detection on rising edge of this bit. + This bit is valid for downstream ports only, and this feature must not be enabled for + normal operation. + + Internal: + If have to use this feature, contact Synopsys. */ + uint32_t request_p1p2p3 : 1; /**< [ 24: 24](R/W) Always request P1/P2/P3 for U1/U2/U3. + 0 = if immediate Ux exit (remotely initiated, or locally initiated) happens, the core does + not request P1/P2/P3 power state change. + 1 = the core always requests PHY power change from P0 to P1/P2/P3 during U0 to U1/U2/U3 + transition. + + Internal: + Note: This bit should be set to 1 for Synopsys PHY. For third-party SuperSpeed + PHY, check with your PHY vendor. */ + uint32_t u1u2exitfail_to_recov : 1; /**< [ 25: 25](R/W) U1U2exit fail to recovery. When set to 1, and U1/U2 LFPS handshake fails, the LTSSM + transitions from U1/U2 to recovery instead of SS.inactive. + If recovery fails, then the LTSSM can enter SS.Inactive. This is an enhancement only. It + prevents interoperability issue if the remote link does not do the proper handshake. */ + uint32_t ping_enchance_en : 1; /**< [ 26: 26](R/W) Ping enhancement enable. When set to 1, the downstream-port U1-ping-receive timeout + becomes 500 ms instead of 300 ms. Minimum Ping.LFPS receive duration is 8 ns (one mac3_clk + cycle). This field is valid for the downstream port only. + + Internal: + Note: This bit is used by third-party SuperSpeed PHY. It should be set to 0 for + Synopsys PHY. */ + uint32_t ux_exit_in_px : 1; /**< [ 27: 27](R/W) UX exit in Px: + 0 = Core does U1/U2/U3 exit in PHY power state P0 (default behavior). + 1 = Core does U1/U2/U3 exit in PHY power state P1/P2/P3 respectively. + + This bit is added for SuperSpeed PHY workaround where SuperSpeed PHY injects a glitch on + pipe3_RxElecIdle while receiving Ux exit LFPS, and pipe3_PowerDown change is in progress. + + Internal: + Note: This bit is used by third-party SuperSpeed PHY. It should be set to 0 for + Synopsys PHY. */ + uint32_t disrxdetp3 : 1; /**< [ 28: 28](R/W) Disables receiver detection in P3. If PHY is in P3 and the core needs to perform receiver + detection: + 0 = Core performs receiver detection in P3 (default). + 1 = Core changes the PHY power state to P2 and then performs receiver detection. After + receiver detection, core changes PHY power state to P3. */ + uint32_t u2ssinactp3ok : 1; /**< [ 29: 29](R/W) P3 OK for U2/SS.Inactive: + 0 = During link state U2/SS.Inactive, put PHY in P2 (default). + 1 = During link state U2/SS.Inactive, put PHY in P3. */ + uint32_t hstprtcmpl : 1; /**< [ 30: 30](R/W) Host port compliance. Setting this bit to 1 enables placing the SuperSpeed port link into + a compliance state, which allows testing of the PIPE PHY compliance patterns without + having to have a test fixture on the USB 3.0 cable. By default, this bit should be set to + 0. + + In compliance-lab testing, the SuperSpeed port link enters compliance after failing the + first polling sequence after power on. Set this bit to 0 when you run compliance tests. + + The sequence for using this functionality is as follows: + * Disconnect any plugged-in devices. + * Set USBH()_UAHC_USBCMD[HCRST] = 1 or power-on-chip reset. + * Set USBH()_UAHC_PORTSC()[PP] = 0. + * Set HSTPRTCMPL = 1. This places the link into compliance state. + + To advance the compliance pattern, follow this sequence (toggle HSTPRTCMPL): + * Set HSTPRTCMPL = 0. + * Set HSTPRTCMPL = 1. This advances the link to the next compliance pattern. + + To exit from the compliance state, set USBH()_UAHC_USBCMD[HCRST] = 1 or power-on-chip + reset. */ + uint32_t physoftrst : 1; /**< [ 31: 31](R/W) USB3 PHY soft reset (PHYSoftRst). When set to 1, initiates a PHY soft reset. After setting + this bit to 1, the software needs to clear this bit. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_gusb3pipectlx_s cn; */ +}; +typedef union bdk_usbhx_uahc_gusb3pipectlx bdk_usbhx_uahc_gusb3pipectlx_t; + +static inline uint64_t BDK_USBHX_UAHC_GUSB3PIPECTLX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_GUSB3PIPECTLX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x86800000c2c0ll + 0x1000000000ll * ((a) & 0x1) + 4ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UAHC_GUSB3PIPECTLX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_GUSB3PIPECTLX(a,b) bdk_usbhx_uahc_gusb3pipectlx_t +#define bustype_BDK_USBHX_UAHC_GUSB3PIPECTLX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_GUSB3PIPECTLX(a,b) "USBHX_UAHC_GUSB3PIPECTLX" +#define device_bar_BDK_USBHX_UAHC_GUSB3PIPECTLX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_GUSB3PIPECTLX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_GUSB3PIPECTLX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_hccparams + * + * XHCI Controller Capability Parameters Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.3.6. + */ +union bdk_usbhx_uahc_hccparams +{ + uint32_t u; + struct bdk_usbhx_uahc_hccparams_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t xecp : 16; /**< [ 31: 16](RO) xHCI extended capabilities pointer. */ + uint32_t maxpsasize : 4; /**< [ 15: 12](RO) Maximum primary-stream-array size. */ + uint32_t reserved_11 : 1; + uint32_t sec : 1; /**< [ 10: 10](RO/H) Stopped EDLTA Capability */ + uint32_t spc : 1; /**< [ 9: 9](RO/H) Stopped - short packet Capability */ + uint32_t pae : 1; /**< [ 8: 8](RO) Parse all event data. */ + uint32_t nss : 1; /**< [ 7: 7](RO) No secondary SID support. */ + uint32_t ltc : 1; /**< [ 6: 6](RO) Latency tolerance messaging capability. */ + uint32_t lhrc : 1; /**< [ 5: 5](RO) Light HC reset capability. */ + uint32_t pind : 1; /**< [ 4: 4](RO) Port indicators. */ + uint32_t ppc : 1; /**< [ 3: 3](RO) Port power control. Value is based on USBH()_UCTL_HOST_CFG[PPC_EN]. */ + uint32_t csz : 1; /**< [ 2: 2](RO) Context size. */ + uint32_t bnc : 1; /**< [ 1: 1](RO) BW negotiation capability. */ + uint32_t ac64 : 1; /**< [ 0: 0](RO) 64-bit addressing capability. */ +#else /* Word 0 - Little Endian */ + uint32_t ac64 : 1; /**< [ 0: 0](RO) 64-bit addressing capability. */ + uint32_t bnc : 1; /**< [ 1: 1](RO) BW negotiation capability. */ + uint32_t csz : 1; /**< [ 2: 2](RO) Context size. */ + uint32_t ppc : 1; /**< [ 3: 3](RO) Port power control. Value is based on USBH()_UCTL_HOST_CFG[PPC_EN]. */ + uint32_t pind : 1; /**< [ 4: 4](RO) Port indicators. */ + uint32_t lhrc : 1; /**< [ 5: 5](RO) Light HC reset capability. */ + uint32_t ltc : 1; /**< [ 6: 6](RO) Latency tolerance messaging capability. */ + uint32_t nss : 1; /**< [ 7: 7](RO) No secondary SID support. */ + uint32_t pae : 1; /**< [ 8: 8](RO) Parse all event data. */ + uint32_t spc : 1; /**< [ 9: 9](RO/H) Stopped - short packet Capability */ + uint32_t sec : 1; /**< [ 10: 10](RO/H) Stopped EDLTA Capability */ + uint32_t reserved_11 : 1; + uint32_t maxpsasize : 4; /**< [ 15: 12](RO) Maximum primary-stream-array size. */ + uint32_t xecp : 16; /**< [ 31: 16](RO) xHCI extended capabilities pointer. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_hccparams_s cn; */ +}; +typedef union bdk_usbhx_uahc_hccparams bdk_usbhx_uahc_hccparams_t; + +static inline uint64_t BDK_USBHX_UAHC_HCCPARAMS(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_HCCPARAMS(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000010ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_HCCPARAMS", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_HCCPARAMS(a) bdk_usbhx_uahc_hccparams_t +#define bustype_BDK_USBHX_UAHC_HCCPARAMS(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_HCCPARAMS(a) "USBHX_UAHC_HCCPARAMS" +#define device_bar_BDK_USBHX_UAHC_HCCPARAMS(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_HCCPARAMS(a) (a) +#define arguments_BDK_USBHX_UAHC_HCCPARAMS(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_hcsparams1 + * + * XHCI Controller Structural Parameters Register 1 + * For information on this register, refer to the xHCI Specification, v1.0, section 5.3.3. + */ +union bdk_usbhx_uahc_hcsparams1 +{ + uint32_t u; + struct bdk_usbhx_uahc_hcsparams1_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t maxports : 8; /**< [ 31: 24](RO) Maximum number of ports. */ + uint32_t reserved_19_23 : 5; + uint32_t maxintrs : 11; /**< [ 18: 8](RO) Maximum number of interrupters. */ + uint32_t maxslots : 8; /**< [ 7: 0](RO) Maximum number of device slots. */ +#else /* Word 0 - Little Endian */ + uint32_t maxslots : 8; /**< [ 7: 0](RO) Maximum number of device slots. */ + uint32_t maxintrs : 11; /**< [ 18: 8](RO) Maximum number of interrupters. */ + uint32_t reserved_19_23 : 5; + uint32_t maxports : 8; /**< [ 31: 24](RO) Maximum number of ports. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_hcsparams1_s cn; */ +}; +typedef union bdk_usbhx_uahc_hcsparams1 bdk_usbhx_uahc_hcsparams1_t; + +static inline uint64_t BDK_USBHX_UAHC_HCSPARAMS1(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_HCSPARAMS1(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000004ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_HCSPARAMS1", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_HCSPARAMS1(a) bdk_usbhx_uahc_hcsparams1_t +#define bustype_BDK_USBHX_UAHC_HCSPARAMS1(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_HCSPARAMS1(a) "USBHX_UAHC_HCSPARAMS1" +#define device_bar_BDK_USBHX_UAHC_HCSPARAMS1(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_HCSPARAMS1(a) (a) +#define arguments_BDK_USBHX_UAHC_HCSPARAMS1(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_hcsparams2 + * + * XHCI Controller Structural Parameters Register 2 + * For information on this register, refer to the xHCI Specification, v1.0, section 5.3.4. + */ +union bdk_usbhx_uahc_hcsparams2 +{ + uint32_t u; + struct bdk_usbhx_uahc_hcsparams2_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t maxscratchpadbufs_l : 5; /**< [ 31: 27](RO) Maximum number of scratchpad buffers[4:0]. */ + uint32_t spr : 1; /**< [ 26: 26](RO) Scratchpad restore. */ + uint32_t maxscratchpadbufs_h : 5; /**< [ 25: 21](RO) Maximum number of scratchpad buffers[9:5]. */ + uint32_t reserved_8_20 : 13; + uint32_t erst_max : 4; /**< [ 7: 4](RO) Event ring segment table maximum. */ + uint32_t ist : 4; /**< [ 3: 0](RO) Isochronous scheduling threshold. */ +#else /* Word 0 - Little Endian */ + uint32_t ist : 4; /**< [ 3: 0](RO) Isochronous scheduling threshold. */ + uint32_t erst_max : 4; /**< [ 7: 4](RO) Event ring segment table maximum. */ + uint32_t reserved_8_20 : 13; + uint32_t maxscratchpadbufs_h : 5; /**< [ 25: 21](RO) Maximum number of scratchpad buffers[9:5]. */ + uint32_t spr : 1; /**< [ 26: 26](RO) Scratchpad restore. */ + uint32_t maxscratchpadbufs_l : 5; /**< [ 31: 27](RO) Maximum number of scratchpad buffers[4:0]. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_hcsparams2_s cn; */ +}; +typedef union bdk_usbhx_uahc_hcsparams2 bdk_usbhx_uahc_hcsparams2_t; + +static inline uint64_t BDK_USBHX_UAHC_HCSPARAMS2(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_HCSPARAMS2(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000008ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_HCSPARAMS2", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_HCSPARAMS2(a) bdk_usbhx_uahc_hcsparams2_t +#define bustype_BDK_USBHX_UAHC_HCSPARAMS2(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_HCSPARAMS2(a) "USBHX_UAHC_HCSPARAMS2" +#define device_bar_BDK_USBHX_UAHC_HCSPARAMS2(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_HCSPARAMS2(a) (a) +#define arguments_BDK_USBHX_UAHC_HCSPARAMS2(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_hcsparams3 + * + * XHCI Controller Structural Parameters Register 3 + * For information on this register, refer to the xHCI Specification, v1.0, section 5.3.5. + */ +union bdk_usbhx_uahc_hcsparams3 +{ + uint32_t u; + struct bdk_usbhx_uahc_hcsparams3_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t u2_device_exit_latency : 16;/**< [ 31: 16](RO) U2 device exit latency. */ + uint32_t reserved_8_15 : 8; + uint32_t u1_device_exit_latency : 8; /**< [ 7: 0](RO) U1 device exit latency. */ +#else /* Word 0 - Little Endian */ + uint32_t u1_device_exit_latency : 8; /**< [ 7: 0](RO) U1 device exit latency. */ + uint32_t reserved_8_15 : 8; + uint32_t u2_device_exit_latency : 16;/**< [ 31: 16](RO) U2 device exit latency. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_hcsparams3_s cn; */ +}; +typedef union bdk_usbhx_uahc_hcsparams3 bdk_usbhx_uahc_hcsparams3_t; + +static inline uint64_t BDK_USBHX_UAHC_HCSPARAMS3(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_HCSPARAMS3(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000000cll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_HCSPARAMS3", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_HCSPARAMS3(a) bdk_usbhx_uahc_hcsparams3_t +#define bustype_BDK_USBHX_UAHC_HCSPARAMS3(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_HCSPARAMS3(a) "USBHX_UAHC_HCSPARAMS3" +#define device_bar_BDK_USBHX_UAHC_HCSPARAMS3(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_HCSPARAMS3(a) (a) +#define arguments_BDK_USBHX_UAHC_HCSPARAMS3(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_iman# + * + * XHCI Interrupt Management Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.5.2.1. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_imanx +{ + uint32_t u; + struct bdk_usbhx_uahc_imanx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_2_31 : 30; + uint32_t ie : 1; /**< [ 1: 1](R/W) Interrupt enable. */ + uint32_t ip : 1; /**< [ 0: 0](R/W1C/H) Interrupt pending. */ +#else /* Word 0 - Little Endian */ + uint32_t ip : 1; /**< [ 0: 0](R/W1C/H) Interrupt pending. */ + uint32_t ie : 1; /**< [ 1: 1](R/W) Interrupt enable. */ + uint32_t reserved_2_31 : 30; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_imanx_s cn; */ +}; +typedef union bdk_usbhx_uahc_imanx bdk_usbhx_uahc_imanx_t; + +static inline uint64_t BDK_USBHX_UAHC_IMANX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_IMANX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x868000000460ll + 0x1000000000ll * ((a) & 0x1) + 0ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UAHC_IMANX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_IMANX(a,b) bdk_usbhx_uahc_imanx_t +#define bustype_BDK_USBHX_UAHC_IMANX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_IMANX(a,b) "USBHX_UAHC_IMANX" +#define device_bar_BDK_USBHX_UAHC_IMANX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_IMANX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_IMANX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_imod# + * + * XHCI Interrupt Moderation Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.5.2.2. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_imodx +{ + uint32_t u; + struct bdk_usbhx_uahc_imodx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t imodc : 16; /**< [ 31: 16](R/W) Interrupt moderation counter. */ + uint32_t imodi : 16; /**< [ 15: 0](R/W) Interrupt moderation interval. */ +#else /* Word 0 - Little Endian */ + uint32_t imodi : 16; /**< [ 15: 0](R/W) Interrupt moderation interval. */ + uint32_t imodc : 16; /**< [ 31: 16](R/W) Interrupt moderation counter. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_imodx_s cn; */ +}; +typedef union bdk_usbhx_uahc_imodx bdk_usbhx_uahc_imodx_t; + +static inline uint64_t BDK_USBHX_UAHC_IMODX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_IMODX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x868000000464ll + 0x1000000000ll * ((a) & 0x1) + 0ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UAHC_IMODX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_IMODX(a,b) bdk_usbhx_uahc_imodx_t +#define bustype_BDK_USBHX_UAHC_IMODX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_IMODX(a,b) "USBHX_UAHC_IMODX" +#define device_bar_BDK_USBHX_UAHC_IMODX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_IMODX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_IMODX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_mfindex + * + * XHCI Microframe Index Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.5.1. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_mfindex +{ + uint32_t u; + struct bdk_usbhx_uahc_mfindex_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_14_31 : 18; + uint32_t mfindex : 14; /**< [ 13: 0](RO/H) Microframe index. */ +#else /* Word 0 - Little Endian */ + uint32_t mfindex : 14; /**< [ 13: 0](RO/H) Microframe index. */ + uint32_t reserved_14_31 : 18; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_mfindex_s cn; */ +}; +typedef union bdk_usbhx_uahc_mfindex bdk_usbhx_uahc_mfindex_t; + +static inline uint64_t BDK_USBHX_UAHC_MFINDEX(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_MFINDEX(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000440ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_MFINDEX", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_MFINDEX(a) bdk_usbhx_uahc_mfindex_t +#define bustype_BDK_USBHX_UAHC_MFINDEX(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_MFINDEX(a) "USBHX_UAHC_MFINDEX" +#define device_bar_BDK_USBHX_UAHC_MFINDEX(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_MFINDEX(a) (a) +#define arguments_BDK_USBHX_UAHC_MFINDEX(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_pagesize + * + * XHCI Page-Size Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.3. + */ +union bdk_usbhx_uahc_pagesize +{ + uint32_t u; + struct bdk_usbhx_uahc_pagesize_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_16_31 : 16; + uint32_t pagesize : 16; /**< [ 15: 0](RO) Page size. */ +#else /* Word 0 - Little Endian */ + uint32_t pagesize : 16; /**< [ 15: 0](RO) Page size. */ + uint32_t reserved_16_31 : 16; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_pagesize_s cn; */ +}; +typedef union bdk_usbhx_uahc_pagesize bdk_usbhx_uahc_pagesize_t; + +static inline uint64_t BDK_USBHX_UAHC_PAGESIZE(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_PAGESIZE(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000028ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_PAGESIZE", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_PAGESIZE(a) bdk_usbhx_uahc_pagesize_t +#define bustype_BDK_USBHX_UAHC_PAGESIZE(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_PAGESIZE(a) "USBHX_UAHC_PAGESIZE" +#define device_bar_BDK_USBHX_UAHC_PAGESIZE(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_PAGESIZE(a) (a) +#define arguments_BDK_USBHX_UAHC_PAGESIZE(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_porthlpmc_20# + * + * XHCI Port Hardware LPM Control (High-Speed) Register + * For information on this register, refer to the xHCI Specification, v1.1, section 5.4.11.2. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_porthlpmc_20x +{ + uint32_t u; + struct bdk_usbhx_uahc_porthlpmc_20x_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_14_31 : 18; + uint32_t hirdd : 4; /**< [ 13: 10](R/W) See section 5.4.11.2 of the XHCI Spec 1.1. + If USBH()_UAHC_SUPTPRT2_DW2[BLC] = 0, then HIRD timing is applied to this field. + If USBH()_UAHC_SUPTPRT2_DW2[BLC] = 1, then BESL timing is applied to this field. */ + uint32_t l1_timeout : 8; /**< [ 9: 2](R/W) Timeout value for the L1 inactivity timer (LPM timer). This field is set to 0x0 by the + assertion of PR to 1. Refer to section 4.23.5.1.1.1 (in XHCI spec 1.1) for more + information on L1 Timeout operation. + The following are permissible values: + 0x0 = 128 us. (default). + 0x1 = 256 us. + 0x2 = 512 us. + 0x3 = 768 us. + _ ... + 0xFF = 65280 us. */ + uint32_t hirdm : 2; /**< [ 1: 0](R/W) Host-initiated resume-duration mode. */ +#else /* Word 0 - Little Endian */ + uint32_t hirdm : 2; /**< [ 1: 0](R/W) Host-initiated resume-duration mode. */ + uint32_t l1_timeout : 8; /**< [ 9: 2](R/W) Timeout value for the L1 inactivity timer (LPM timer). This field is set to 0x0 by the + assertion of PR to 1. Refer to section 4.23.5.1.1.1 (in XHCI spec 1.1) for more + information on L1 Timeout operation. + The following are permissible values: + 0x0 = 128 us. (default). + 0x1 = 256 us. + 0x2 = 512 us. + 0x3 = 768 us. + _ ... + 0xFF = 65280 us. */ + uint32_t hirdd : 4; /**< [ 13: 10](R/W) See section 5.4.11.2 of the XHCI Spec 1.1. + If USBH()_UAHC_SUPTPRT2_DW2[BLC] = 0, then HIRD timing is applied to this field. + If USBH()_UAHC_SUPTPRT2_DW2[BLC] = 1, then BESL timing is applied to this field. */ + uint32_t reserved_14_31 : 18; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_porthlpmc_20x_s cn; */ +}; +typedef union bdk_usbhx_uahc_porthlpmc_20x bdk_usbhx_uahc_porthlpmc_20x_t; + +static inline uint64_t BDK_USBHX_UAHC_PORTHLPMC_20X(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_PORTHLPMC_20X(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x86800000042cll + 0x1000000000ll * ((a) & 0x1) + 0x10ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UAHC_PORTHLPMC_20X", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_PORTHLPMC_20X(a,b) bdk_usbhx_uahc_porthlpmc_20x_t +#define bustype_BDK_USBHX_UAHC_PORTHLPMC_20X(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_PORTHLPMC_20X(a,b) "USBHX_UAHC_PORTHLPMC_20X" +#define device_bar_BDK_USBHX_UAHC_PORTHLPMC_20X(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_PORTHLPMC_20X(a,b) (a) +#define arguments_BDK_USBHX_UAHC_PORTHLPMC_20X(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_porthlpmc_ss# + * + * XHCI Port Hardware LPM Control (SuperSpeed) Register + * The USB3 port hardware LPM control register is reserved and shall be treated as RsvdP by + * software. See xHCI specification v1.1 section 5.4.11.1. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST]. + */ +union bdk_usbhx_uahc_porthlpmc_ssx +{ + uint32_t u; + struct bdk_usbhx_uahc_porthlpmc_ssx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_0_31 : 32; +#else /* Word 0 - Little Endian */ + uint32_t reserved_0_31 : 32; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_porthlpmc_ssx_s cn; */ +}; +typedef union bdk_usbhx_uahc_porthlpmc_ssx bdk_usbhx_uahc_porthlpmc_ssx_t; + +static inline uint64_t BDK_USBHX_UAHC_PORTHLPMC_SSX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_PORTHLPMC_SSX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==1))) + return 0x86800000042cll + 0x1000000000ll * ((a) & 0x1) + 0x10ll * ((b) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_PORTHLPMC_SSX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_PORTHLPMC_SSX(a,b) bdk_usbhx_uahc_porthlpmc_ssx_t +#define bustype_BDK_USBHX_UAHC_PORTHLPMC_SSX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_PORTHLPMC_SSX(a,b) "USBHX_UAHC_PORTHLPMC_SSX" +#define device_bar_BDK_USBHX_UAHC_PORTHLPMC_SSX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_PORTHLPMC_SSX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_PORTHLPMC_SSX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_portli_20# + * + * XHCI Port Link (High-Speed) Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.10. + */ +union bdk_usbhx_uahc_portli_20x +{ + uint32_t u; + struct bdk_usbhx_uahc_portli_20x_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_0_31 : 32; +#else /* Word 0 - Little Endian */ + uint32_t reserved_0_31 : 32; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_portli_20x_s cn; */ +}; +typedef union bdk_usbhx_uahc_portli_20x bdk_usbhx_uahc_portli_20x_t; + +static inline uint64_t BDK_USBHX_UAHC_PORTLI_20X(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_PORTLI_20X(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x868000000428ll + 0x1000000000ll * ((a) & 0x1) + 0x10ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UAHC_PORTLI_20X", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_PORTLI_20X(a,b) bdk_usbhx_uahc_portli_20x_t +#define bustype_BDK_USBHX_UAHC_PORTLI_20X(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_PORTLI_20X(a,b) "USBHX_UAHC_PORTLI_20X" +#define device_bar_BDK_USBHX_UAHC_PORTLI_20X(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_PORTLI_20X(a,b) (a) +#define arguments_BDK_USBHX_UAHC_PORTLI_20X(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_portli_ss# + * + * XHCI Port Link (SuperSpeed) Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.10. + */ +union bdk_usbhx_uahc_portli_ssx +{ + uint32_t u; + struct bdk_usbhx_uahc_portli_ssx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_16_31 : 16; + uint32_t linkerrorcount : 16; /**< [ 15: 0](RO/H) Link error count. */ +#else /* Word 0 - Little Endian */ + uint32_t linkerrorcount : 16; /**< [ 15: 0](RO/H) Link error count. */ + uint32_t reserved_16_31 : 16; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_portli_ssx_s cn; */ +}; +typedef union bdk_usbhx_uahc_portli_ssx bdk_usbhx_uahc_portli_ssx_t; + +static inline uint64_t BDK_USBHX_UAHC_PORTLI_SSX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_PORTLI_SSX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==1))) + return 0x868000000428ll + 0x1000000000ll * ((a) & 0x1) + 0x10ll * ((b) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_PORTLI_SSX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_PORTLI_SSX(a,b) bdk_usbhx_uahc_portli_ssx_t +#define bustype_BDK_USBHX_UAHC_PORTLI_SSX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_PORTLI_SSX(a,b) "USBHX_UAHC_PORTLI_SSX" +#define device_bar_BDK_USBHX_UAHC_PORTLI_SSX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_PORTLI_SSX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_PORTLI_SSX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_portpmsc_20# + * + * XHCI Port Power Management Status/Control (High-Speed) Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.9. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST]. + */ +union bdk_usbhx_uahc_portpmsc_20x +{ + uint32_t u; + struct bdk_usbhx_uahc_portpmsc_20x_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t port_test_control : 4; /**< [ 31: 28](R/W) Port test control. */ + uint32_t reserved_17_27 : 11; + uint32_t hle : 1; /**< [ 16: 16](R/W) Hardware LPM enable. */ + uint32_t l1_device_slot : 8; /**< [ 15: 8](R/W) L1 device slot. */ + uint32_t hird : 4; /**< [ 7: 4](R/W) Host-initiated resume duration. */ + uint32_t rwe : 1; /**< [ 3: 3](R/W) Remove wake enable. */ + uint32_t l1s : 3; /**< [ 2: 0](RO/H) L1 status. */ +#else /* Word 0 - Little Endian */ + uint32_t l1s : 3; /**< [ 2: 0](RO/H) L1 status. */ + uint32_t rwe : 1; /**< [ 3: 3](R/W) Remove wake enable. */ + uint32_t hird : 4; /**< [ 7: 4](R/W) Host-initiated resume duration. */ + uint32_t l1_device_slot : 8; /**< [ 15: 8](R/W) L1 device slot. */ + uint32_t hle : 1; /**< [ 16: 16](R/W) Hardware LPM enable. */ + uint32_t reserved_17_27 : 11; + uint32_t port_test_control : 4; /**< [ 31: 28](R/W) Port test control. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_portpmsc_20x_s cn; */ +}; +typedef union bdk_usbhx_uahc_portpmsc_20x bdk_usbhx_uahc_portpmsc_20x_t; + +static inline uint64_t BDK_USBHX_UAHC_PORTPMSC_20X(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_PORTPMSC_20X(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x868000000424ll + 0x1000000000ll * ((a) & 0x1) + 0x10ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UAHC_PORTPMSC_20X", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_PORTPMSC_20X(a,b) bdk_usbhx_uahc_portpmsc_20x_t +#define bustype_BDK_USBHX_UAHC_PORTPMSC_20X(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_PORTPMSC_20X(a,b) "USBHX_UAHC_PORTPMSC_20X" +#define device_bar_BDK_USBHX_UAHC_PORTPMSC_20X(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_PORTPMSC_20X(a,b) (a) +#define arguments_BDK_USBHX_UAHC_PORTPMSC_20X(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_portpmsc_ss# + * + * XHCI Port Power Management Status/Control (SuperSpeed) Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.9. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST]. + */ +union bdk_usbhx_uahc_portpmsc_ssx +{ + uint32_t u; + struct bdk_usbhx_uahc_portpmsc_ssx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_17_31 : 15; + uint32_t fla : 1; /**< [ 16: 16](R/W/H) Force link PM accept. */ + uint32_t u2_timeout : 8; /**< [ 15: 8](R/W/H) U2 timeout. */ + uint32_t u1_timeout : 8; /**< [ 7: 0](R/W/H) U1 timeout. */ +#else /* Word 0 - Little Endian */ + uint32_t u1_timeout : 8; /**< [ 7: 0](R/W/H) U1 timeout. */ + uint32_t u2_timeout : 8; /**< [ 15: 8](R/W/H) U2 timeout. */ + uint32_t fla : 1; /**< [ 16: 16](R/W/H) Force link PM accept. */ + uint32_t reserved_17_31 : 15; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_portpmsc_ssx_s cn; */ +}; +typedef union bdk_usbhx_uahc_portpmsc_ssx bdk_usbhx_uahc_portpmsc_ssx_t; + +static inline uint64_t BDK_USBHX_UAHC_PORTPMSC_SSX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_PORTPMSC_SSX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==1))) + return 0x868000000424ll + 0x1000000000ll * ((a) & 0x1) + 0x10ll * ((b) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_PORTPMSC_SSX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_PORTPMSC_SSX(a,b) bdk_usbhx_uahc_portpmsc_ssx_t +#define bustype_BDK_USBHX_UAHC_PORTPMSC_SSX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_PORTPMSC_SSX(a,b) "USBHX_UAHC_PORTPMSC_SSX" +#define device_bar_BDK_USBHX_UAHC_PORTPMSC_SSX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_PORTPMSC_SSX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_PORTPMSC_SSX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_portsc# + * + * XHCI Port Status and Control Registers + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.8. Port 1 + * is USB3.0 SuperSpeed link, Port 0 is USB2.0 high-speed/full-speed/low-speed link. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST]. + */ +union bdk_usbhx_uahc_portscx +{ + uint32_t u; + struct bdk_usbhx_uahc_portscx_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t wpr : 1; /**< [ 31: 31](WO) Warm port reset. */ + uint32_t dr : 1; /**< [ 30: 30](RO/H) Device removable. */ + uint32_t reserved_28_29 : 2; + uint32_t woe : 1; /**< [ 27: 27](R/W) Wake on overcurrent enable. */ + uint32_t wde : 1; /**< [ 26: 26](R/W) Wake on disconnect enable. */ + uint32_t wce : 1; /**< [ 25: 25](R/W) Wake on connect enable. */ + uint32_t cas : 1; /**< [ 24: 24](RO/H) Cold attach status. */ + uint32_t cec : 1; /**< [ 23: 23](R/W1C/H) Port configuration error change. */ + uint32_t plc : 1; /**< [ 22: 22](R/W1C/H) Port link state change. */ + uint32_t prc : 1; /**< [ 21: 21](R/W1C/H) Port reset change. */ + uint32_t occ : 1; /**< [ 20: 20](R/W1C/H) Overcurrent change. */ + uint32_t wrc : 1; /**< [ 19: 19](R/W1C/H) Warm port reset change. */ + uint32_t pec : 1; /**< [ 18: 18](R/W1C/H) Port enabled/disabled change. */ + uint32_t csc : 1; /**< [ 17: 17](R/W1C/H) Connect status change. */ + uint32_t lws : 1; /**< [ 16: 16](WO) Port link state write strobe. */ + uint32_t pic : 2; /**< [ 15: 14](R/W/H) Port indicator control. */ + uint32_t portspeed : 4; /**< [ 13: 10](RO/H) Port speed. */ + uint32_t pp : 1; /**< [ 9: 9](R/W/H) Port power. */ + uint32_t pls : 4; /**< [ 8: 5](R/W/H) Port link state. */ + uint32_t pr : 1; /**< [ 4: 4](R/W1S/H) Port reset. */ + uint32_t oca : 1; /**< [ 3: 3](RO/H) Overcurrent active. */ + uint32_t reserved_2 : 1; + uint32_t ped : 1; /**< [ 1: 1](R/W1C/H) Port enabled/disabled. */ + uint32_t ccs : 1; /**< [ 0: 0](RO/H) Current connect status. */ +#else /* Word 0 - Little Endian */ + uint32_t ccs : 1; /**< [ 0: 0](RO/H) Current connect status. */ + uint32_t ped : 1; /**< [ 1: 1](R/W1C/H) Port enabled/disabled. */ + uint32_t reserved_2 : 1; + uint32_t oca : 1; /**< [ 3: 3](RO/H) Overcurrent active. */ + uint32_t pr : 1; /**< [ 4: 4](R/W1S/H) Port reset. */ + uint32_t pls : 4; /**< [ 8: 5](R/W/H) Port link state. */ + uint32_t pp : 1; /**< [ 9: 9](R/W/H) Port power. */ + uint32_t portspeed : 4; /**< [ 13: 10](RO/H) Port speed. */ + uint32_t pic : 2; /**< [ 15: 14](R/W/H) Port indicator control. */ + uint32_t lws : 1; /**< [ 16: 16](WO) Port link state write strobe. */ + uint32_t csc : 1; /**< [ 17: 17](R/W1C/H) Connect status change. */ + uint32_t pec : 1; /**< [ 18: 18](R/W1C/H) Port enabled/disabled change. */ + uint32_t wrc : 1; /**< [ 19: 19](R/W1C/H) Warm port reset change. */ + uint32_t occ : 1; /**< [ 20: 20](R/W1C/H) Overcurrent change. */ + uint32_t prc : 1; /**< [ 21: 21](R/W1C/H) Port reset change. */ + uint32_t plc : 1; /**< [ 22: 22](R/W1C/H) Port link state change. */ + uint32_t cec : 1; /**< [ 23: 23](R/W1C/H) Port configuration error change. */ + uint32_t cas : 1; /**< [ 24: 24](RO/H) Cold attach status. */ + uint32_t wce : 1; /**< [ 25: 25](R/W) Wake on connect enable. */ + uint32_t wde : 1; /**< [ 26: 26](R/W) Wake on disconnect enable. */ + uint32_t woe : 1; /**< [ 27: 27](R/W) Wake on overcurrent enable. */ + uint32_t reserved_28_29 : 2; + uint32_t dr : 1; /**< [ 30: 30](RO/H) Device removable. */ + uint32_t wpr : 1; /**< [ 31: 31](WO) Warm port reset. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_portscx_s cn; */ +}; +typedef union bdk_usbhx_uahc_portscx bdk_usbhx_uahc_portscx_t; + +static inline uint64_t BDK_USBHX_UAHC_PORTSCX(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_PORTSCX(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b<=1))) + return 0x868000000420ll + 0x1000000000ll * ((a) & 0x1) + 0x10ll * ((b) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_PORTSCX", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_PORTSCX(a,b) bdk_usbhx_uahc_portscx_t +#define bustype_BDK_USBHX_UAHC_PORTSCX(a,b) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_PORTSCX(a,b) "USBHX_UAHC_PORTSCX" +#define device_bar_BDK_USBHX_UAHC_PORTSCX(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_PORTSCX(a,b) (a) +#define arguments_BDK_USBHX_UAHC_PORTSCX(a,b) (a),(b),-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_rtsoff + * + * XHCI Runtime Register-Space Offset Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.3.8. + */ +union bdk_usbhx_uahc_rtsoff +{ + uint32_t u; + struct bdk_usbhx_uahc_rtsoff_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t rtsoff : 27; /**< [ 31: 5](RO) Runtime register-space offset. */ + uint32_t reserved_0_4 : 5; +#else /* Word 0 - Little Endian */ + uint32_t reserved_0_4 : 5; + uint32_t rtsoff : 27; /**< [ 31: 5](RO) Runtime register-space offset. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_rtsoff_s cn; */ +}; +typedef union bdk_usbhx_uahc_rtsoff bdk_usbhx_uahc_rtsoff_t; + +static inline uint64_t BDK_USBHX_UAHC_RTSOFF(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_RTSOFF(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000018ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_RTSOFF", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_RTSOFF(a) bdk_usbhx_uahc_rtsoff_t +#define bustype_BDK_USBHX_UAHC_RTSOFF(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_RTSOFF(a) "USBHX_UAHC_RTSOFF" +#define device_bar_BDK_USBHX_UAHC_RTSOFF(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_RTSOFF(a) (a) +#define arguments_BDK_USBHX_UAHC_RTSOFF(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_suptprt2_dw0 + * + * XHCI Supported-Protocol-Capability (USB 2.0) Register 0 + * For information on this register, refer to the xHCI Specification, v1.0, section 7.2. + */ +union bdk_usbhx_uahc_suptprt2_dw0 +{ + uint32_t u; + struct bdk_usbhx_uahc_suptprt2_dw0_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t majorrev : 8; /**< [ 31: 24](RO) Major revision. */ + uint32_t minorrev : 8; /**< [ 23: 16](RO) Minor revision. */ + uint32_t nextcapptr : 8; /**< [ 15: 8](RO) Next capability pointer. */ + uint32_t capid : 8; /**< [ 7: 0](RO) Capability ID = supported protocol. */ +#else /* Word 0 - Little Endian */ + uint32_t capid : 8; /**< [ 7: 0](RO) Capability ID = supported protocol. */ + uint32_t nextcapptr : 8; /**< [ 15: 8](RO) Next capability pointer. */ + uint32_t minorrev : 8; /**< [ 23: 16](RO) Minor revision. */ + uint32_t majorrev : 8; /**< [ 31: 24](RO) Major revision. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_suptprt2_dw0_s cn; */ +}; +typedef union bdk_usbhx_uahc_suptprt2_dw0 bdk_usbhx_uahc_suptprt2_dw0_t; + +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT2_DW0(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT2_DW0(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000890ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_SUPTPRT2_DW0", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_SUPTPRT2_DW0(a) bdk_usbhx_uahc_suptprt2_dw0_t +#define bustype_BDK_USBHX_UAHC_SUPTPRT2_DW0(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_SUPTPRT2_DW0(a) "USBHX_UAHC_SUPTPRT2_DW0" +#define device_bar_BDK_USBHX_UAHC_SUPTPRT2_DW0(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_SUPTPRT2_DW0(a) (a) +#define arguments_BDK_USBHX_UAHC_SUPTPRT2_DW0(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_suptprt2_dw1 + * + * XHCI Supported-Protocol-Capability (USB 2.0) Register 1 + * For information on this register, refer to the xHCI Specification, v1.0, section 7.2. + */ +union bdk_usbhx_uahc_suptprt2_dw1 +{ + uint32_t u; + struct bdk_usbhx_uahc_suptprt2_dw1_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t name : 32; /**< [ 31: 0](RO) Name string: 'USB'. */ +#else /* Word 0 - Little Endian */ + uint32_t name : 32; /**< [ 31: 0](RO) Name string: 'USB'. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_suptprt2_dw1_s cn; */ +}; +typedef union bdk_usbhx_uahc_suptprt2_dw1 bdk_usbhx_uahc_suptprt2_dw1_t; + +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT2_DW1(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT2_DW1(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000894ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_SUPTPRT2_DW1", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_SUPTPRT2_DW1(a) bdk_usbhx_uahc_suptprt2_dw1_t +#define bustype_BDK_USBHX_UAHC_SUPTPRT2_DW1(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_SUPTPRT2_DW1(a) "USBHX_UAHC_SUPTPRT2_DW1" +#define device_bar_BDK_USBHX_UAHC_SUPTPRT2_DW1(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_SUPTPRT2_DW1(a) (a) +#define arguments_BDK_USBHX_UAHC_SUPTPRT2_DW1(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_suptprt2_dw2 + * + * XHCI Supported-Protocol-Capability (USB 2.0) Register 2 + * For information on this register, refer to the xHCI Specification, v1.0, section 7.2. + */ +union bdk_usbhx_uahc_suptprt2_dw2 +{ + uint32_t u; + struct bdk_usbhx_uahc_suptprt2_dw2_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t psic : 4; /**< [ 31: 28](RO) Protocol speed ID count. */ + uint32_t reserved_21_27 : 7; + uint32_t blc : 1; /**< [ 20: 20](RO) BESL LPM capability. */ + uint32_t hlc : 1; /**< [ 19: 19](RO) Hardware LMP capability. */ + uint32_t ihi : 1; /**< [ 18: 18](RO) Integrated hub implemented. */ + uint32_t hso : 1; /**< [ 17: 17](RO) High-speed only. */ + uint32_t reserved_16 : 1; + uint32_t compatprtcnt : 8; /**< [ 15: 8](RO) Compatible port count. */ + uint32_t compatprtoff : 8; /**< [ 7: 0](RO) Compatible port offset. */ +#else /* Word 0 - Little Endian */ + uint32_t compatprtoff : 8; /**< [ 7: 0](RO) Compatible port offset. */ + uint32_t compatprtcnt : 8; /**< [ 15: 8](RO) Compatible port count. */ + uint32_t reserved_16 : 1; + uint32_t hso : 1; /**< [ 17: 17](RO) High-speed only. */ + uint32_t ihi : 1; /**< [ 18: 18](RO) Integrated hub implemented. */ + uint32_t hlc : 1; /**< [ 19: 19](RO) Hardware LMP capability. */ + uint32_t blc : 1; /**< [ 20: 20](RO) BESL LPM capability. */ + uint32_t reserved_21_27 : 7; + uint32_t psic : 4; /**< [ 31: 28](RO) Protocol speed ID count. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_suptprt2_dw2_s cn; */ +}; +typedef union bdk_usbhx_uahc_suptprt2_dw2 bdk_usbhx_uahc_suptprt2_dw2_t; + +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT2_DW2(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT2_DW2(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000898ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_SUPTPRT2_DW2", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_SUPTPRT2_DW2(a) bdk_usbhx_uahc_suptprt2_dw2_t +#define bustype_BDK_USBHX_UAHC_SUPTPRT2_DW2(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_SUPTPRT2_DW2(a) "USBHX_UAHC_SUPTPRT2_DW2" +#define device_bar_BDK_USBHX_UAHC_SUPTPRT2_DW2(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_SUPTPRT2_DW2(a) (a) +#define arguments_BDK_USBHX_UAHC_SUPTPRT2_DW2(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_suptprt2_dw3 + * + * XHCI Supported-Protocol-Capability (USB 2.0) Register 3 + * For information on this register, refer to the xHCI Specification, v1.1, section 7.2. + */ +union bdk_usbhx_uahc_suptprt2_dw3 +{ + uint32_t u; + struct bdk_usbhx_uahc_suptprt2_dw3_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_5_31 : 27; + uint32_t protslottype : 5; /**< [ 4: 0](RO) Protocol slot type. */ +#else /* Word 0 - Little Endian */ + uint32_t protslottype : 5; /**< [ 4: 0](RO) Protocol slot type. */ + uint32_t reserved_5_31 : 27; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_suptprt2_dw3_s cn; */ +}; +typedef union bdk_usbhx_uahc_suptprt2_dw3 bdk_usbhx_uahc_suptprt2_dw3_t; + +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT2_DW3(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT2_DW3(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x86800000089cll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_SUPTPRT2_DW3", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_SUPTPRT2_DW3(a) bdk_usbhx_uahc_suptprt2_dw3_t +#define bustype_BDK_USBHX_UAHC_SUPTPRT2_DW3(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_SUPTPRT2_DW3(a) "USBHX_UAHC_SUPTPRT2_DW3" +#define device_bar_BDK_USBHX_UAHC_SUPTPRT2_DW3(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_SUPTPRT2_DW3(a) (a) +#define arguments_BDK_USBHX_UAHC_SUPTPRT2_DW3(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_suptprt3_dw0 + * + * XHCI Supported-Protocol-Capability (USB 3.0) Register 0 + * For information on this register, refer to the xHCI Specification, v1.0, section 7.2. + */ +union bdk_usbhx_uahc_suptprt3_dw0 +{ + uint32_t u; + struct bdk_usbhx_uahc_suptprt3_dw0_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t majorrev : 8; /**< [ 31: 24](RO) Major revision. */ + uint32_t minorrev : 8; /**< [ 23: 16](RO) Minor revision. */ + uint32_t nextcapptr : 8; /**< [ 15: 8](RO/H) Next capability pointer. Value depends on USBH()_UAHC_GUCTL[EXTCAPSUPTEN]. If EXTCAPSUPTEN + = + 0, value is 0x0. If EXTCAPSUPTEN = 1, value is 0x4. */ + uint32_t capid : 8; /**< [ 7: 0](RO) Capability ID = supported protocol. */ +#else /* Word 0 - Little Endian */ + uint32_t capid : 8; /**< [ 7: 0](RO) Capability ID = supported protocol. */ + uint32_t nextcapptr : 8; /**< [ 15: 8](RO/H) Next capability pointer. Value depends on USBH()_UAHC_GUCTL[EXTCAPSUPTEN]. If EXTCAPSUPTEN + = + 0, value is 0x0. If EXTCAPSUPTEN = 1, value is 0x4. */ + uint32_t minorrev : 8; /**< [ 23: 16](RO) Minor revision. */ + uint32_t majorrev : 8; /**< [ 31: 24](RO) Major revision. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_suptprt3_dw0_s cn; */ +}; +typedef union bdk_usbhx_uahc_suptprt3_dw0 bdk_usbhx_uahc_suptprt3_dw0_t; + +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT3_DW0(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT3_DW0(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x8680000008a0ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_SUPTPRT3_DW0", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_SUPTPRT3_DW0(a) bdk_usbhx_uahc_suptprt3_dw0_t +#define bustype_BDK_USBHX_UAHC_SUPTPRT3_DW0(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_SUPTPRT3_DW0(a) "USBHX_UAHC_SUPTPRT3_DW0" +#define device_bar_BDK_USBHX_UAHC_SUPTPRT3_DW0(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_SUPTPRT3_DW0(a) (a) +#define arguments_BDK_USBHX_UAHC_SUPTPRT3_DW0(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_suptprt3_dw1 + * + * XHCI Supported-Protocol-Capability (USB 3.0) Register 1 + * For information on this register, refer to the xHCI Specification, v1.0, section 7.2. + */ +union bdk_usbhx_uahc_suptprt3_dw1 +{ + uint32_t u; + struct bdk_usbhx_uahc_suptprt3_dw1_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t name : 32; /**< [ 31: 0](RO) Name string: 'USB'. */ +#else /* Word 0 - Little Endian */ + uint32_t name : 32; /**< [ 31: 0](RO) Name string: 'USB'. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_suptprt3_dw1_s cn; */ +}; +typedef union bdk_usbhx_uahc_suptprt3_dw1 bdk_usbhx_uahc_suptprt3_dw1_t; + +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT3_DW1(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT3_DW1(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x8680000008a4ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_SUPTPRT3_DW1", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_SUPTPRT3_DW1(a) bdk_usbhx_uahc_suptprt3_dw1_t +#define bustype_BDK_USBHX_UAHC_SUPTPRT3_DW1(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_SUPTPRT3_DW1(a) "USBHX_UAHC_SUPTPRT3_DW1" +#define device_bar_BDK_USBHX_UAHC_SUPTPRT3_DW1(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_SUPTPRT3_DW1(a) (a) +#define arguments_BDK_USBHX_UAHC_SUPTPRT3_DW1(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_suptprt3_dw2 + * + * XHCI Supported-Protocol-Capability (USB 3.0) Register 2 + * For information on this register, refer to the xHCI Specification, v1.0, section 7.2. + */ +union bdk_usbhx_uahc_suptprt3_dw2 +{ + uint32_t u; + struct bdk_usbhx_uahc_suptprt3_dw2_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t psic : 4; /**< [ 31: 28](RO) Protocol speed ID count. */ + uint32_t reserved_16_27 : 12; + uint32_t compatprtcnt : 8; /**< [ 15: 8](RO) Compatible port count. */ + uint32_t compatprtoff : 8; /**< [ 7: 0](RO) Compatible port offset. */ +#else /* Word 0 - Little Endian */ + uint32_t compatprtoff : 8; /**< [ 7: 0](RO) Compatible port offset. */ + uint32_t compatprtcnt : 8; /**< [ 15: 8](RO) Compatible port count. */ + uint32_t reserved_16_27 : 12; + uint32_t psic : 4; /**< [ 31: 28](RO) Protocol speed ID count. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_suptprt3_dw2_s cn; */ +}; +typedef union bdk_usbhx_uahc_suptprt3_dw2 bdk_usbhx_uahc_suptprt3_dw2_t; + +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT3_DW2(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT3_DW2(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x8680000008a8ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_SUPTPRT3_DW2", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_SUPTPRT3_DW2(a) bdk_usbhx_uahc_suptprt3_dw2_t +#define bustype_BDK_USBHX_UAHC_SUPTPRT3_DW2(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_SUPTPRT3_DW2(a) "USBHX_UAHC_SUPTPRT3_DW2" +#define device_bar_BDK_USBHX_UAHC_SUPTPRT3_DW2(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_SUPTPRT3_DW2(a) (a) +#define arguments_BDK_USBHX_UAHC_SUPTPRT3_DW2(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_suptprt3_dw3 + * + * XHCI Supported-Protocol-Capability (USB 3.0) Register 3 + * For information on this register, refer to the xHCI Specification, v1.1, section 7.2. + */ +union bdk_usbhx_uahc_suptprt3_dw3 +{ + uint32_t u; + struct bdk_usbhx_uahc_suptprt3_dw3_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_5_31 : 27; + uint32_t protslottype : 5; /**< [ 4: 0](RO) Protocol slot type. */ +#else /* Word 0 - Little Endian */ + uint32_t protslottype : 5; /**< [ 4: 0](RO) Protocol slot type. */ + uint32_t reserved_5_31 : 27; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_suptprt3_dw3_s cn; */ +}; +typedef union bdk_usbhx_uahc_suptprt3_dw3 bdk_usbhx_uahc_suptprt3_dw3_t; + +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT3_DW3(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_SUPTPRT3_DW3(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x8680000008acll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_SUPTPRT3_DW3", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_SUPTPRT3_DW3(a) bdk_usbhx_uahc_suptprt3_dw3_t +#define bustype_BDK_USBHX_UAHC_SUPTPRT3_DW3(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_SUPTPRT3_DW3(a) "USBHX_UAHC_SUPTPRT3_DW3" +#define device_bar_BDK_USBHX_UAHC_SUPTPRT3_DW3(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_SUPTPRT3_DW3(a) (a) +#define arguments_BDK_USBHX_UAHC_SUPTPRT3_DW3(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_usbcmd + * + * XHCI Command Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.1. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_usbcmd +{ + uint32_t u; + struct bdk_usbhx_uahc_usbcmd_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_12_31 : 20; + uint32_t eu3s : 1; /**< [ 11: 11](R/W) Enable U3 MFINDEX stop. */ + uint32_t ewe : 1; /**< [ 10: 10](R/W) Enable wrap event. */ + uint32_t crs : 1; /**< [ 9: 9](WO) Controller restore state. */ + uint32_t css : 1; /**< [ 8: 8](WO) Controller save state. */ + uint32_t lhcrst : 1; /**< [ 7: 7](R/W1S/H) Light host controller reset. */ + uint32_t reserved_4_6 : 3; + uint32_t hsee : 1; /**< [ 3: 3](R/W) Host system error enable. */ + uint32_t inte : 1; /**< [ 2: 2](R/W) Interrupter enable. */ + uint32_t hcrst : 1; /**< [ 1: 1](R/W1S/H) Host controller reset. */ + uint32_t r_s : 1; /**< [ 0: 0](R/W) Run/stop. */ +#else /* Word 0 - Little Endian */ + uint32_t r_s : 1; /**< [ 0: 0](R/W) Run/stop. */ + uint32_t hcrst : 1; /**< [ 1: 1](R/W1S/H) Host controller reset. */ + uint32_t inte : 1; /**< [ 2: 2](R/W) Interrupter enable. */ + uint32_t hsee : 1; /**< [ 3: 3](R/W) Host system error enable. */ + uint32_t reserved_4_6 : 3; + uint32_t lhcrst : 1; /**< [ 7: 7](R/W1S/H) Light host controller reset. */ + uint32_t css : 1; /**< [ 8: 8](WO) Controller save state. */ + uint32_t crs : 1; /**< [ 9: 9](WO) Controller restore state. */ + uint32_t ewe : 1; /**< [ 10: 10](R/W) Enable wrap event. */ + uint32_t eu3s : 1; /**< [ 11: 11](R/W) Enable U3 MFINDEX stop. */ + uint32_t reserved_12_31 : 20; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_usbcmd_s cn; */ +}; +typedef union bdk_usbhx_uahc_usbcmd bdk_usbhx_uahc_usbcmd_t; + +static inline uint64_t BDK_USBHX_UAHC_USBCMD(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_USBCMD(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000020ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_USBCMD", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_USBCMD(a) bdk_usbhx_uahc_usbcmd_t +#define bustype_BDK_USBHX_UAHC_USBCMD(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_USBCMD(a) "USBHX_UAHC_USBCMD" +#define device_bar_BDK_USBHX_UAHC_USBCMD(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_USBCMD(a) (a) +#define arguments_BDK_USBHX_UAHC_USBCMD(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_usblegctlsts + * + * XHCI Legacy Support Control/Status Register + * For information on this register, refer to the xHCI Specification, v1.0, section 7.1.2. Note + * that the SMI interrupts are not connected to anything in a CNXXXX configuration. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_usblegctlsts +{ + uint32_t u; + struct bdk_usbhx_uahc_usblegctlsts_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t smi_on_bar : 1; /**< [ 31: 31](R/W1C/H) System management interrupt on BAR. Never generated. */ + uint32_t smi_on_pci_command : 1; /**< [ 30: 30](R/W1C/H) System management interrupt on PCI command. Never generated. */ + uint32_t smi_on_os_ownership : 1; /**< [ 29: 29](R/W1C/H) System management interrupt on OS ownership change. This bit is set to 1 whenever + USBH()_UAHC_USBLEGSUP[HC_OS_OWNED_SEMAPHORES] transitions. */ + uint32_t reserved_21_28 : 8; + uint32_t smi_on_hostsystemerr : 1; /**< [ 20: 20](RO/H) System-management interrupt on host-system error. Shadow bit of USBH()_UAHC_USBSTS[HSE]. + Refer to + xHCI Section 5.4.2 for definition and effects of the events associated with this bit being + set to 1. + + To clear this bit to a 0, system software must write a 1 to USBH()_UAHC_USBSTS[HSE]. */ + uint32_t reserved_17_19 : 3; + uint32_t smi_on_event_interrupt : 1; /**< [ 16: 16](RO/H) System-management interrupt on event interrupt. Shadow bit of USBH()_UAHC_USBSTS[EINT]. + Refer to + xHCI Section 5.4.2 for definition. This bit automatically clears when [EINT] clears and + sets when [EINT] sets. */ + uint32_t smi_on_bar_en : 1; /**< [ 15: 15](R/W) System-management interrupt on BAR enable. */ + uint32_t smi_on_pci_command_en : 1; /**< [ 14: 14](R/W) System-management interrupt on PCI command enable. */ + uint32_t smi_on_os_ownership_en : 1; /**< [ 13: 13](R/W) System-management interrupt on OS ownership enable. */ + uint32_t reserved_5_12 : 8; + uint32_t smi_on_hostsystemerr_en : 1;/**< [ 4: 4](R/W) System-management interrupt on host-system error enable */ + uint32_t reserved_1_3 : 3; + uint32_t usb_smi_en : 1; /**< [ 0: 0](R/W) USB system-management interrupt enable. */ +#else /* Word 0 - Little Endian */ + uint32_t usb_smi_en : 1; /**< [ 0: 0](R/W) USB system-management interrupt enable. */ + uint32_t reserved_1_3 : 3; + uint32_t smi_on_hostsystemerr_en : 1;/**< [ 4: 4](R/W) System-management interrupt on host-system error enable */ + uint32_t reserved_5_12 : 8; + uint32_t smi_on_os_ownership_en : 1; /**< [ 13: 13](R/W) System-management interrupt on OS ownership enable. */ + uint32_t smi_on_pci_command_en : 1; /**< [ 14: 14](R/W) System-management interrupt on PCI command enable. */ + uint32_t smi_on_bar_en : 1; /**< [ 15: 15](R/W) System-management interrupt on BAR enable. */ + uint32_t smi_on_event_interrupt : 1; /**< [ 16: 16](RO/H) System-management interrupt on event interrupt. Shadow bit of USBH()_UAHC_USBSTS[EINT]. + Refer to + xHCI Section 5.4.2 for definition. This bit automatically clears when [EINT] clears and + sets when [EINT] sets. */ + uint32_t reserved_17_19 : 3; + uint32_t smi_on_hostsystemerr : 1; /**< [ 20: 20](RO/H) System-management interrupt on host-system error. Shadow bit of USBH()_UAHC_USBSTS[HSE]. + Refer to + xHCI Section 5.4.2 for definition and effects of the events associated with this bit being + set to 1. + + To clear this bit to a 0, system software must write a 1 to USBH()_UAHC_USBSTS[HSE]. */ + uint32_t reserved_21_28 : 8; + uint32_t smi_on_os_ownership : 1; /**< [ 29: 29](R/W1C/H) System management interrupt on OS ownership change. This bit is set to 1 whenever + USBH()_UAHC_USBLEGSUP[HC_OS_OWNED_SEMAPHORES] transitions. */ + uint32_t smi_on_pci_command : 1; /**< [ 30: 30](R/W1C/H) System management interrupt on PCI command. Never generated. */ + uint32_t smi_on_bar : 1; /**< [ 31: 31](R/W1C/H) System management interrupt on BAR. Never generated. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_usblegctlsts_s cn; */ +}; +typedef union bdk_usbhx_uahc_usblegctlsts bdk_usbhx_uahc_usblegctlsts_t; + +static inline uint64_t BDK_USBHX_UAHC_USBLEGCTLSTS(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_USBLEGCTLSTS(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000884ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_USBLEGCTLSTS", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_USBLEGCTLSTS(a) bdk_usbhx_uahc_usblegctlsts_t +#define bustype_BDK_USBHX_UAHC_USBLEGCTLSTS(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_USBLEGCTLSTS(a) "USBHX_UAHC_USBLEGCTLSTS" +#define device_bar_BDK_USBHX_UAHC_USBLEGCTLSTS(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_USBLEGCTLSTS(a) (a) +#define arguments_BDK_USBHX_UAHC_USBLEGCTLSTS(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_usblegsup + * + * XHCI Legacy Support Capability Register + * For information on this register, refer to the xHCI Specification, v1.0, section 7.1.1. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_usblegsup +{ + uint32_t u; + struct bdk_usbhx_uahc_usblegsup_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_25_31 : 7; + uint32_t hc_os_owned_semaphores : 1; /**< [ 24: 24](R/W) HC OS-owned semaphore. */ + uint32_t reserved_17_23 : 7; + uint32_t hc_bios_owned_semaphores : 1;/**< [ 16: 16](R/W) HC BIOS-owned semaphore. */ + uint32_t nextcapptr : 8; /**< [ 15: 8](RO) Next xHCI extended-capability pointer. */ + uint32_t capid : 8; /**< [ 7: 0](RO) Capability ID = USB legacy support. */ +#else /* Word 0 - Little Endian */ + uint32_t capid : 8; /**< [ 7: 0](RO) Capability ID = USB legacy support. */ + uint32_t nextcapptr : 8; /**< [ 15: 8](RO) Next xHCI extended-capability pointer. */ + uint32_t hc_bios_owned_semaphores : 1;/**< [ 16: 16](R/W) HC BIOS-owned semaphore. */ + uint32_t reserved_17_23 : 7; + uint32_t hc_os_owned_semaphores : 1; /**< [ 24: 24](R/W) HC OS-owned semaphore. */ + uint32_t reserved_25_31 : 7; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_usblegsup_s cn; */ +}; +typedef union bdk_usbhx_uahc_usblegsup bdk_usbhx_uahc_usblegsup_t; + +static inline uint64_t BDK_USBHX_UAHC_USBLEGSUP(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_USBLEGSUP(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000880ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_USBLEGSUP", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_USBLEGSUP(a) bdk_usbhx_uahc_usblegsup_t +#define bustype_BDK_USBHX_UAHC_USBLEGSUP(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_USBLEGSUP(a) "USBHX_UAHC_USBLEGSUP" +#define device_bar_BDK_USBHX_UAHC_USBLEGSUP(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_USBLEGSUP(a) (a) +#define arguments_BDK_USBHX_UAHC_USBLEGSUP(a) (a),-1,-1,-1 + +/** + * Register (NCB32b) usbh#_uahc_usbsts + * + * XHCI Status Register + * For information on this register, refer to the xHCI Specification, v1.0, section 5.4.2. + * + * This register can be reset by NCB reset, + * or USBH()_UCTL_CTL[UAHC_RST], + * or USBH()_UAHC_GCTL[CORESOFTRESET], + * or USBH()_UAHC_USBCMD[HCRST], or USBH()_UAHC_USBCMD[LHCRST]. + */ +union bdk_usbhx_uahc_usbsts +{ + uint32_t u; + struct bdk_usbhx_uahc_usbsts_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint32_t reserved_13_31 : 19; + uint32_t hce : 1; /**< [ 12: 12](RO/H) Host controller error. */ + uint32_t cnr : 1; /**< [ 11: 11](RO/H) Controller not ready. */ + uint32_t sre : 1; /**< [ 10: 10](R/W1C/H) Save/restore error. */ + uint32_t rss : 1; /**< [ 9: 9](RO/H) Restore state status. */ + uint32_t sss : 1; /**< [ 8: 8](RO/H) Save state status. */ + uint32_t reserved_5_7 : 3; + uint32_t pcd : 1; /**< [ 4: 4](R/W1C/H) Port change detect. */ + uint32_t eint : 1; /**< [ 3: 3](R/W1C/H) Event interrupt. */ + uint32_t hse : 1; /**< [ 2: 2](R/W1C/H) Host system error. The typical software response to an HSE is to reset the core. */ + uint32_t reserved_1 : 1; + uint32_t hch : 1; /**< [ 0: 0](RO/H) HC halted. */ +#else /* Word 0 - Little Endian */ + uint32_t hch : 1; /**< [ 0: 0](RO/H) HC halted. */ + uint32_t reserved_1 : 1; + uint32_t hse : 1; /**< [ 2: 2](R/W1C/H) Host system error. The typical software response to an HSE is to reset the core. */ + uint32_t eint : 1; /**< [ 3: 3](R/W1C/H) Event interrupt. */ + uint32_t pcd : 1; /**< [ 4: 4](R/W1C/H) Port change detect. */ + uint32_t reserved_5_7 : 3; + uint32_t sss : 1; /**< [ 8: 8](RO/H) Save state status. */ + uint32_t rss : 1; /**< [ 9: 9](RO/H) Restore state status. */ + uint32_t sre : 1; /**< [ 10: 10](R/W1C/H) Save/restore error. */ + uint32_t cnr : 1; /**< [ 11: 11](RO/H) Controller not ready. */ + uint32_t hce : 1; /**< [ 12: 12](RO/H) Host controller error. */ + uint32_t reserved_13_31 : 19; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uahc_usbsts_s cn; */ +}; +typedef union bdk_usbhx_uahc_usbsts bdk_usbhx_uahc_usbsts_t; + +static inline uint64_t BDK_USBHX_UAHC_USBSTS(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UAHC_USBSTS(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000000024ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UAHC_USBSTS", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UAHC_USBSTS(a) bdk_usbhx_uahc_usbsts_t +#define bustype_BDK_USBHX_UAHC_USBSTS(a) BDK_CSR_TYPE_NCB32b +#define basename_BDK_USBHX_UAHC_USBSTS(a) "USBHX_UAHC_USBSTS" +#define device_bar_BDK_USBHX_UAHC_USBSTS(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UAHC_USBSTS(a) (a) +#define arguments_BDK_USBHX_UAHC_USBSTS(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uctl_bist_status + * + * UCTL BIST Status Register + * This register indicates the results from the built-in self-test (BIST) runs of USBH memories. + * A 0 indicates pass or never run, a 1 indicates fail. This register can be reset by NCB reset. + */ +union bdk_usbhx_uctl_bist_status +{ + uint64_t u; + struct bdk_usbhx_uctl_bist_status_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_42_63 : 22; + uint64_t uctl_xm_r_bist_ndone : 1; /**< [ 41: 41](RO/H) BIST is not complete for the UCTL AxiMaster read-data FIFO. */ + uint64_t uctl_xm_w_bist_ndone : 1; /**< [ 40: 40](RO/H) BIST is not complete for the UCTL AxiMaster write-data FIFO. */ + uint64_t reserved_35_39 : 5; + uint64_t uahc_ram2_bist_ndone : 1; /**< [ 34: 34](RO/H) BIST is not complete for the UAHC RxFIFO RAM (RAM2). */ + uint64_t uahc_ram1_bist_ndone : 1; /**< [ 33: 33](RO/H) BIST is not complete for the UAHC TxFIFO RAM (RAM1). */ + uint64_t uahc_ram0_bist_ndone : 1; /**< [ 32: 32](RO/H) BIST is not complete for the UAHC descriptor/register cache (RAM0). */ + uint64_t reserved_10_31 : 22; + uint64_t uctl_xm_r_bist_status : 1; /**< [ 9: 9](RO/H) BIST status of the UCTL AxiMaster read-data FIFO. */ + uint64_t uctl_xm_w_bist_status : 1; /**< [ 8: 8](RO/H) BIST status of the UCTL AxiMaster write-data FIFO. */ + uint64_t reserved_3_7 : 5; + uint64_t uahc_ram2_bist_status : 1; /**< [ 2: 2](RO/H) BIST status of the UAHC RxFIFO RAM (RAM2). */ + uint64_t uahc_ram1_bist_status : 1; /**< [ 1: 1](RO/H) BIST status of the UAHC TxFIFO RAM (RAM1). */ + uint64_t uahc_ram0_bist_status : 1; /**< [ 0: 0](RO/H) BIST status of the UAHC descriptor/register cache (RAM0). */ +#else /* Word 0 - Little Endian */ + uint64_t uahc_ram0_bist_status : 1; /**< [ 0: 0](RO/H) BIST status of the UAHC descriptor/register cache (RAM0). */ + uint64_t uahc_ram1_bist_status : 1; /**< [ 1: 1](RO/H) BIST status of the UAHC TxFIFO RAM (RAM1). */ + uint64_t uahc_ram2_bist_status : 1; /**< [ 2: 2](RO/H) BIST status of the UAHC RxFIFO RAM (RAM2). */ + uint64_t reserved_3_7 : 5; + uint64_t uctl_xm_w_bist_status : 1; /**< [ 8: 8](RO/H) BIST status of the UCTL AxiMaster write-data FIFO. */ + uint64_t uctl_xm_r_bist_status : 1; /**< [ 9: 9](RO/H) BIST status of the UCTL AxiMaster read-data FIFO. */ + uint64_t reserved_10_31 : 22; + uint64_t uahc_ram0_bist_ndone : 1; /**< [ 32: 32](RO/H) BIST is not complete for the UAHC descriptor/register cache (RAM0). */ + uint64_t uahc_ram1_bist_ndone : 1; /**< [ 33: 33](RO/H) BIST is not complete for the UAHC TxFIFO RAM (RAM1). */ + uint64_t uahc_ram2_bist_ndone : 1; /**< [ 34: 34](RO/H) BIST is not complete for the UAHC RxFIFO RAM (RAM2). */ + uint64_t reserved_35_39 : 5; + uint64_t uctl_xm_w_bist_ndone : 1; /**< [ 40: 40](RO/H) BIST is not complete for the UCTL AxiMaster write-data FIFO. */ + uint64_t uctl_xm_r_bist_ndone : 1; /**< [ 41: 41](RO/H) BIST is not complete for the UCTL AxiMaster read-data FIFO. */ + uint64_t reserved_42_63 : 22; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_bist_status_s cn; */ +}; +typedef union bdk_usbhx_uctl_bist_status bdk_usbhx_uctl_bist_status_t; + +static inline uint64_t BDK_USBHX_UCTL_BIST_STATUS(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_BIST_STATUS(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000100008ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UCTL_BIST_STATUS", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_BIST_STATUS(a) bdk_usbhx_uctl_bist_status_t +#define bustype_BDK_USBHX_UCTL_BIST_STATUS(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_BIST_STATUS(a) "USBHX_UCTL_BIST_STATUS" +#define device_bar_BDK_USBHX_UCTL_BIST_STATUS(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_BIST_STATUS(a) (a) +#define arguments_BDK_USBHX_UCTL_BIST_STATUS(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uctl_ctl + * + * UCTL Control Register + * This register controls clocks, resets, power, and BIST. + * + * This register can be reset by NCB reset. + */ +union bdk_usbhx_uctl_ctl +{ + uint64_t u; + struct bdk_usbhx_uctl_ctl_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t clear_bist : 1; /**< [ 63: 63](R/W) BIST fast-clear mode select. A BIST run with this bit set clears all entries in USBH RAMs + to 0x0. + + There are two major modes of BIST: full and clear. Full BIST is run by the BIST state + machine when [CLEAR_BIST] is deasserted during BIST. Clear BIST is run if [CLEAR_BIST] is + asserted during BIST. + + To avoid race conditions, software must first perform a CSR write operation that puts the + [CLEAR_BIST] setting into the correct state and then perform another CSR write operation + to + set the BIST trigger (keeping the [CLEAR_BIST] state constant). + CLEAR BIST completion is indicated by USBH()_UCTL_BIST_STATUS. A BIST clear operation + takes almost 2,000 controller-clock cycles for the largest RAM. */ + uint64_t start_bist : 1; /**< [ 62: 62](R/W) Rising edge starts BIST on the memories in USBH. + To run BIST, the controller clock must be both configured and enabled, and should be + configured to the maximum available frequency given the available coprocessor clock and + dividers. + Also, the UCTL, UAHC, and UPHY should be held in software- initiated reset (using + [UPHY_RST], [UAHC_RST], [UCTL_RST]) until BIST is complete. + BIST defect status can be checked after FULL BIST completion, both of which are indicated + in USBH()_UCTL_BIST_STATUS. The full BIST run takes almost 80,000 controller-clock cycles + for + the largest RAM. */ + uint64_t ref_clk_sel : 2; /**< [ 61: 60](R/W) Reference clock select. Choose reference-clock source for the SuperSpeed and high-speed + PLL blocks. + 0x0 = Reference clock source for both PLLs come from the USB pads. + 0x1 = Reserved. + 0x2 = Reserved. + 0x3 = Reserved. + + This value can be changed only during UPHY_RST. + + If REF_CLK_SEL = 0x0, then the reference clock input cannot be spread-spectrum. + + Internal: + For the 0x1 selection, reference clock source for SuperSpeed PLL is from the USB + pads, reference clock source for HighSpeed PLL is PLL_REF_CLK. But in 78xx, PLL_REF_CLK + cannot be routed to USB without violating jitter requirements */ + uint64_t ssc_en : 1; /**< [ 59: 59](R/W) Spread-spectrum clock enable. Enables spread-spectrum clock production in the SuperSpeed + function. If the input reference clock for the SuperSpeed PLL is already spread-spectrum, + then do not enable this feature. The clocks sourced to the SuperSpeed function must have + spread-spectrum to be compliant with the USB specification. + The high-speed PLL cannot support a spread-spectrum input, so REF_CLK_SEL = 0x0 must + enable this feature. + This value may only be changed during [UPHY_RST]. */ + uint64_t ssc_range : 3; /**< [ 58: 56](R/W) Spread-spectrum clock range. Selects the range of spread-spectrum modulation when SSC_EN + is asserted and the PHY is spreading the SuperSpeed transmit clocks. + Applies a fixed offset to the phase accumulator. + 0x0 = -4980 ppm downspread of clock. + 0x1 = -4492 ppm. + 0x2 = -4003 ppm. + 0x3-0x7 = reserved. + + All of these settings are within the USB 3.0 specification. The amount of EMI emission + reduction might decrease as the [SSC_RANGE] increases; therefore, the [SSC_RANGE] settings + can + be registered to enable the amount of spreading to be adjusted on a per-application basis. + This value can be changed only during UPHY_RST. */ + uint64_t ssc_ref_clk_sel : 9; /**< [ 55: 47](R/W) Enables non-standard oscillator frequencies to generate targeted MPLL output rates. Input + corresponds to the frequency-synthesis coefficient. + + [55:53]: modulus - 1, + [52:47]: 2's complement push amount + + Must leave at reset value of 0x0. + This value may only be changed during [UPHY_RST]. */ + uint64_t mpll_multiplier : 7; /**< [ 46: 40](R/W) Multiplies the reference clock to a frequency suitable for intended operating speed. Must + leave at reset value of 0x0. This value may only be changed during [UPHY_RST]. + This value is superseded by the [REF_CLK_FSEL]\<5:3\> selection. */ + uint64_t ref_ssp_en : 1; /**< [ 39: 39](R/W) Enables reference clock to the prescaler for SuperSpeed function. This should always be + enabled since this output clock is used to drive the UAHC suspend-mode clock during + low-power states. + + This value can be changed only during UPHY_RST or during low-power states. + The reference clock must be running and stable before [UPHY_RST] is deasserted and before + [REF_SSP_EN] is asserted. */ + uint64_t ref_clk_div2 : 1; /**< [ 38: 38](R/W) Divides the reference clock by 2 before feeding it into the REF_CLK_FSEL divider. Must + leave at reset value of 0x0. + + This value can be changed only during UPHY_RST. */ + uint64_t ref_clk_fsel : 6; /**< [ 37: 32](R/W) Selects the reference clock frequency for the SuperSpeed and high-speed PLL blocks. The + legal values are as follows: + 0x27 = External reference clock 100 MHz. + + All other values are reserved. + This value may only be changed during [UPHY_RST]. + + Internal: + 0x2A = External reference clock 24 MHz. + 0x31 = External reference clock 20 MHz. + 0x38 = External reference clock 19.2 MHz. */ + uint64_t reserved_31 : 1; + uint64_t h_clk_en : 1; /**< [ 30: 30](R/W) Controller-clock enable. When set to 1, the controller clock is generated. This also + enables access to UCTL registers 0x30-0xF8. */ + uint64_t h_clk_byp_sel : 1; /**< [ 29: 29](R/W) Select the bypass input to the controller-clock divider. + 0 = Use the divided coprocessor clock from the H_CLKDIV divider. + 1 = Use the bypass clock from the GPIO pins. + + This signal is just a multiplexer-select signal; it does not enable the controller clock. + You must still set H_CLKDIV_EN separately. [H_CLK_BYP_SEL] select should not be changed + unless H_CLKDIV_EN is disabled. + + The bypass clock can be selected and running even if the controller-clock dividers are not + running. + + Internal: + Generally bypass is only used for scan purposes. */ + uint64_t h_clkdiv_rst : 1; /**< [ 28: 28](R/W) Controller clock divider reset. Divided clocks are not generated while the divider is + being reset. + This also resets the suspend-clock divider. */ + uint64_t reserved_27 : 1; + uint64_t h_clkdiv_sel : 3; /**< [ 26: 24](R/W) Controller clock-frequency-divider select. The controller-clock frequency is the + coprocessor-clock frequency divided by [H_CLKDIV_SEL] and must be at or below 300 MHz. + The divider values are the following: + 0x0 = divide by 1. + 0x1 = divide by 2. + 0x2 = divide by 4. + 0x3 = divide by 6. + 0x4 = divide by 8. + 0x5 = divide by 16. + 0x6 = divide by 24. + 0x7 = divide by 32. + + For USB3: + * The controller-clock frequency must be at or above 125 MHz for any USB3 operation. + * The controller-clock frequency must be at or above + 150 MHz for full-rate USB3 operation. + + For USB2: + * The controller-clock frequency must be at or above 62.5 MHz for any USB2 operation. + * The controller-clock frequency must be at or above + 90 MHz for full-rate USB2 operation. + + This field can be changed only when [H_CLKDIV_RST] = 1. + + Internal: + 150MHz is from the maximum of Synopsys DWC_usb3 Databook v2.50a, table A-16, row + 1, col 12. Synopsys DWC_usb3 Databook v2.50a, table A-17, row 7, col 9. Synopsys DWC_usb3 + Databook v2.50a, table A-16, row 7, col 9. HOST2\>62.5MHz in HOST mode is from Synopsys + DWC_usb3 Databook v2.50a, section A.12.5, 3rd bullet in Note on page 894. HOST2\>90MHz was + arrived at from some math: 62.5MHz + (diff between row 1 and 2, col 12 of table A-16). */ + uint64_t reserved_22_23 : 2; + uint64_t usb3_port_perm_attach : 1; /**< [ 21: 21](R/W) Indicates this port is permanently attached. This is a strap signal; it should be modified + only when [UPHY_RST] is asserted. */ + uint64_t usb2_port_perm_attach : 1; /**< [ 20: 20](R/W) Indicates this port is permanently attached. This is a strap signal; it should be modified + only when [UPHY_RST] is asserted. */ + uint64_t reserved_19 : 1; + uint64_t usb3_port_disable : 1; /**< [ 18: 18](R/W) Disables the USB3 (SuperSpeed) portion of this PHY. When set to 1, this signal stops + reporting connect/disconnect events on the port and keeps the port in disabled state. This + could be used for security reasons where hardware can disable a port regardless of whether + xHCI driver enables a port or not. + USBH()_UAHC_HCSPARAMS1[MAXPORTS] is not affected by this signal. + + This is a strap signal; it should be modified only when [UPHY_RST] is asserted. */ + uint64_t reserved_17 : 1; + uint64_t usb2_port_disable : 1; /**< [ 16: 16](R/W) Disables USB2 (high-speed/full-speed/low-speed) portion of this PHY. When set to 1, this + signal stops reporting connect/disconnect events on the port and keeps the port in + disabled state. This could be used for security reasons where hardware can disable a port + regardless of whether xHCI driver enables a port or not. + USBH()_UAHC_HCSPARAMS1[MAXPORTS] is not affected by this signal. + + This is a strap signal; it should only be modified when [UPHY_RST] is asserted. + If Port0 is required to be disabled, ensure that the utmi_clk[0] is running at the normal + speed. Also, all the enabled USB2.0 ports should have the same clock frequency as Port0. */ + uint64_t reserved_15 : 1; + uint64_t ss_power_en : 1; /**< [ 14: 14](R/W) PHY SuperSpeed block power enable. + This is a strap signal; it should only be modified when [UPHY_RST] is asserted. */ + uint64_t reserved_13 : 1; + uint64_t hs_power_en : 1; /**< [ 12: 12](R/W) PHY high-speed block power enable. + This is a strap signal; it should only be modified when [UPHY_RST] is asserted. */ + uint64_t reserved_5_11 : 7; + uint64_t csclk_en : 1; /**< [ 4: 4](R/W) Turns on the USB UCTL interface clock (coprocessor clock). This enables access to UAHC + and UCTL registers starting from 0x30. */ + uint64_t reserved_3 : 1; + uint64_t uphy_rst : 1; /**< [ 2: 2](R/W) PHY reset; resets UPHY; active-high. */ + uint64_t uahc_rst : 1; /**< [ 1: 1](R/W) Software reset; resets UAHC; active-high. + Internal: + Note that soft-resetting the UAHC while it is active may cause violations of RSL + or NCB protocols. */ + uint64_t uctl_rst : 1; /**< [ 0: 0](R/W) Software reset; resets UCTL; active-high. + Resets UAHC DMA and register shims. Resets UCTL registers 0x30-0xF8. + Does not reset UCTL registers 0x0-0x28. + UCTL registers starting from 0x30 can be accessed only after the controller clock is + active and [UCTL_RST] is deasserted. + + Internal: + Note that soft-resetting the UCTL while it is active may cause violations of + RSL, NCB, and CIB protocols. */ +#else /* Word 0 - Little Endian */ + uint64_t uctl_rst : 1; /**< [ 0: 0](R/W) Software reset; resets UCTL; active-high. + Resets UAHC DMA and register shims. Resets UCTL registers 0x30-0xF8. + Does not reset UCTL registers 0x0-0x28. + UCTL registers starting from 0x30 can be accessed only after the controller clock is + active and [UCTL_RST] is deasserted. + + Internal: + Note that soft-resetting the UCTL while it is active may cause violations of + RSL, NCB, and CIB protocols. */ + uint64_t uahc_rst : 1; /**< [ 1: 1](R/W) Software reset; resets UAHC; active-high. + Internal: + Note that soft-resetting the UAHC while it is active may cause violations of RSL + or NCB protocols. */ + uint64_t uphy_rst : 1; /**< [ 2: 2](R/W) PHY reset; resets UPHY; active-high. */ + uint64_t reserved_3 : 1; + uint64_t csclk_en : 1; /**< [ 4: 4](R/W) Turns on the USB UCTL interface clock (coprocessor clock). This enables access to UAHC + and UCTL registers starting from 0x30. */ + uint64_t reserved_5_11 : 7; + uint64_t hs_power_en : 1; /**< [ 12: 12](R/W) PHY high-speed block power enable. + This is a strap signal; it should only be modified when [UPHY_RST] is asserted. */ + uint64_t reserved_13 : 1; + uint64_t ss_power_en : 1; /**< [ 14: 14](R/W) PHY SuperSpeed block power enable. + This is a strap signal; it should only be modified when [UPHY_RST] is asserted. */ + uint64_t reserved_15 : 1; + uint64_t usb2_port_disable : 1; /**< [ 16: 16](R/W) Disables USB2 (high-speed/full-speed/low-speed) portion of this PHY. When set to 1, this + signal stops reporting connect/disconnect events on the port and keeps the port in + disabled state. This could be used for security reasons where hardware can disable a port + regardless of whether xHCI driver enables a port or not. + USBH()_UAHC_HCSPARAMS1[MAXPORTS] is not affected by this signal. + + This is a strap signal; it should only be modified when [UPHY_RST] is asserted. + If Port0 is required to be disabled, ensure that the utmi_clk[0] is running at the normal + speed. Also, all the enabled USB2.0 ports should have the same clock frequency as Port0. */ + uint64_t reserved_17 : 1; + uint64_t usb3_port_disable : 1; /**< [ 18: 18](R/W) Disables the USB3 (SuperSpeed) portion of this PHY. When set to 1, this signal stops + reporting connect/disconnect events on the port and keeps the port in disabled state. This + could be used for security reasons where hardware can disable a port regardless of whether + xHCI driver enables a port or not. + USBH()_UAHC_HCSPARAMS1[MAXPORTS] is not affected by this signal. + + This is a strap signal; it should be modified only when [UPHY_RST] is asserted. */ + uint64_t reserved_19 : 1; + uint64_t usb2_port_perm_attach : 1; /**< [ 20: 20](R/W) Indicates this port is permanently attached. This is a strap signal; it should be modified + only when [UPHY_RST] is asserted. */ + uint64_t usb3_port_perm_attach : 1; /**< [ 21: 21](R/W) Indicates this port is permanently attached. This is a strap signal; it should be modified + only when [UPHY_RST] is asserted. */ + uint64_t reserved_22_23 : 2; + uint64_t h_clkdiv_sel : 3; /**< [ 26: 24](R/W) Controller clock-frequency-divider select. The controller-clock frequency is the + coprocessor-clock frequency divided by [H_CLKDIV_SEL] and must be at or below 300 MHz. + The divider values are the following: + 0x0 = divide by 1. + 0x1 = divide by 2. + 0x2 = divide by 4. + 0x3 = divide by 6. + 0x4 = divide by 8. + 0x5 = divide by 16. + 0x6 = divide by 24. + 0x7 = divide by 32. + + For USB3: + * The controller-clock frequency must be at or above 125 MHz for any USB3 operation. + * The controller-clock frequency must be at or above + 150 MHz for full-rate USB3 operation. + + For USB2: + * The controller-clock frequency must be at or above 62.5 MHz for any USB2 operation. + * The controller-clock frequency must be at or above + 90 MHz for full-rate USB2 operation. + + This field can be changed only when [H_CLKDIV_RST] = 1. + + Internal: + 150MHz is from the maximum of Synopsys DWC_usb3 Databook v2.50a, table A-16, row + 1, col 12. Synopsys DWC_usb3 Databook v2.50a, table A-17, row 7, col 9. Synopsys DWC_usb3 + Databook v2.50a, table A-16, row 7, col 9. HOST2\>62.5MHz in HOST mode is from Synopsys + DWC_usb3 Databook v2.50a, section A.12.5, 3rd bullet in Note on page 894. HOST2\>90MHz was + arrived at from some math: 62.5MHz + (diff between row 1 and 2, col 12 of table A-16). */ + uint64_t reserved_27 : 1; + uint64_t h_clkdiv_rst : 1; /**< [ 28: 28](R/W) Controller clock divider reset. Divided clocks are not generated while the divider is + being reset. + This also resets the suspend-clock divider. */ + uint64_t h_clk_byp_sel : 1; /**< [ 29: 29](R/W) Select the bypass input to the controller-clock divider. + 0 = Use the divided coprocessor clock from the H_CLKDIV divider. + 1 = Use the bypass clock from the GPIO pins. + + This signal is just a multiplexer-select signal; it does not enable the controller clock. + You must still set H_CLKDIV_EN separately. [H_CLK_BYP_SEL] select should not be changed + unless H_CLKDIV_EN is disabled. + + The bypass clock can be selected and running even if the controller-clock dividers are not + running. + + Internal: + Generally bypass is only used for scan purposes. */ + uint64_t h_clk_en : 1; /**< [ 30: 30](R/W) Controller-clock enable. When set to 1, the controller clock is generated. This also + enables access to UCTL registers 0x30-0xF8. */ + uint64_t reserved_31 : 1; + uint64_t ref_clk_fsel : 6; /**< [ 37: 32](R/W) Selects the reference clock frequency for the SuperSpeed and high-speed PLL blocks. The + legal values are as follows: + 0x27 = External reference clock 100 MHz. + + All other values are reserved. + This value may only be changed during [UPHY_RST]. + + Internal: + 0x2A = External reference clock 24 MHz. + 0x31 = External reference clock 20 MHz. + 0x38 = External reference clock 19.2 MHz. */ + uint64_t ref_clk_div2 : 1; /**< [ 38: 38](R/W) Divides the reference clock by 2 before feeding it into the REF_CLK_FSEL divider. Must + leave at reset value of 0x0. + + This value can be changed only during UPHY_RST. */ + uint64_t ref_ssp_en : 1; /**< [ 39: 39](R/W) Enables reference clock to the prescaler for SuperSpeed function. This should always be + enabled since this output clock is used to drive the UAHC suspend-mode clock during + low-power states. + + This value can be changed only during UPHY_RST or during low-power states. + The reference clock must be running and stable before [UPHY_RST] is deasserted and before + [REF_SSP_EN] is asserted. */ + uint64_t mpll_multiplier : 7; /**< [ 46: 40](R/W) Multiplies the reference clock to a frequency suitable for intended operating speed. Must + leave at reset value of 0x0. This value may only be changed during [UPHY_RST]. + This value is superseded by the [REF_CLK_FSEL]\<5:3\> selection. */ + uint64_t ssc_ref_clk_sel : 9; /**< [ 55: 47](R/W) Enables non-standard oscillator frequencies to generate targeted MPLL output rates. Input + corresponds to the frequency-synthesis coefficient. + + [55:53]: modulus - 1, + [52:47]: 2's complement push amount + + Must leave at reset value of 0x0. + This value may only be changed during [UPHY_RST]. */ + uint64_t ssc_range : 3; /**< [ 58: 56](R/W) Spread-spectrum clock range. Selects the range of spread-spectrum modulation when SSC_EN + is asserted and the PHY is spreading the SuperSpeed transmit clocks. + Applies a fixed offset to the phase accumulator. + 0x0 = -4980 ppm downspread of clock. + 0x1 = -4492 ppm. + 0x2 = -4003 ppm. + 0x3-0x7 = reserved. + + All of these settings are within the USB 3.0 specification. The amount of EMI emission + reduction might decrease as the [SSC_RANGE] increases; therefore, the [SSC_RANGE] settings + can + be registered to enable the amount of spreading to be adjusted on a per-application basis. + This value can be changed only during UPHY_RST. */ + uint64_t ssc_en : 1; /**< [ 59: 59](R/W) Spread-spectrum clock enable. Enables spread-spectrum clock production in the SuperSpeed + function. If the input reference clock for the SuperSpeed PLL is already spread-spectrum, + then do not enable this feature. The clocks sourced to the SuperSpeed function must have + spread-spectrum to be compliant with the USB specification. + The high-speed PLL cannot support a spread-spectrum input, so REF_CLK_SEL = 0x0 must + enable this feature. + This value may only be changed during [UPHY_RST]. */ + uint64_t ref_clk_sel : 2; /**< [ 61: 60](R/W) Reference clock select. Choose reference-clock source for the SuperSpeed and high-speed + PLL blocks. + 0x0 = Reference clock source for both PLLs come from the USB pads. + 0x1 = Reserved. + 0x2 = Reserved. + 0x3 = Reserved. + + This value can be changed only during UPHY_RST. + + If REF_CLK_SEL = 0x0, then the reference clock input cannot be spread-spectrum. + + Internal: + For the 0x1 selection, reference clock source for SuperSpeed PLL is from the USB + pads, reference clock source for HighSpeed PLL is PLL_REF_CLK. But in 78xx, PLL_REF_CLK + cannot be routed to USB without violating jitter requirements */ + uint64_t start_bist : 1; /**< [ 62: 62](R/W) Rising edge starts BIST on the memories in USBH. + To run BIST, the controller clock must be both configured and enabled, and should be + configured to the maximum available frequency given the available coprocessor clock and + dividers. + Also, the UCTL, UAHC, and UPHY should be held in software- initiated reset (using + [UPHY_RST], [UAHC_RST], [UCTL_RST]) until BIST is complete. + BIST defect status can be checked after FULL BIST completion, both of which are indicated + in USBH()_UCTL_BIST_STATUS. The full BIST run takes almost 80,000 controller-clock cycles + for + the largest RAM. */ + uint64_t clear_bist : 1; /**< [ 63: 63](R/W) BIST fast-clear mode select. A BIST run with this bit set clears all entries in USBH RAMs + to 0x0. + + There are two major modes of BIST: full and clear. Full BIST is run by the BIST state + machine when [CLEAR_BIST] is deasserted during BIST. Clear BIST is run if [CLEAR_BIST] is + asserted during BIST. + + To avoid race conditions, software must first perform a CSR write operation that puts the + [CLEAR_BIST] setting into the correct state and then perform another CSR write operation + to + set the BIST trigger (keeping the [CLEAR_BIST] state constant). + CLEAR BIST completion is indicated by USBH()_UCTL_BIST_STATUS. A BIST clear operation + takes almost 2,000 controller-clock cycles for the largest RAM. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_ctl_s cn; */ +}; +typedef union bdk_usbhx_uctl_ctl bdk_usbhx_uctl_ctl_t; + +static inline uint64_t BDK_USBHX_UCTL_CTL(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_CTL(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000100000ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UCTL_CTL", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_CTL(a) bdk_usbhx_uctl_ctl_t +#define bustype_BDK_USBHX_UCTL_CTL(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_CTL(a) "USBHX_UCTL_CTL" +#define device_bar_BDK_USBHX_UCTL_CTL(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_CTL(a) (a) +#define arguments_BDK_USBHX_UCTL_CTL(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uctl_ecc + * + * UCTL ECC Control Register + * This register can be used to disable ECC correction, insert ECC errors, and debug ECC + * failures. + * * The ECC_ERR* fields are captured when there are no outstanding ECC errors indicated in + * INTSTAT and a new ECC error arrives. Prioritization for multiple events occurring on the same + * cycle is indicated by the ECC_ERR_SOURCE enumeration: highest encoded value has highest + * priority. + * * The *ECC_*_DIS fields disable ECC correction; SBE and DBE errors are still reported. If + * *ECC_*_DIS = 0x1, then no data-correction occurs. + * * The *ECC_FLIP_SYND fields flip the syndrome\<1:0\> bits to generate single-bit/double-bit + * error for testing. + * + * 0x0 = Normal operation. + * 0x1 = SBE on bit[0]. + * 0x2 = SBE on bit[1]. + * 0x3 = DBE on bit[1:0]. + * + * This register is accessible only when USB()_UCTL_CTL[H_CLK_EN] = 1. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UCTL_RST]. + */ +union bdk_usbhx_uctl_ecc +{ + uint64_t u; + struct bdk_usbhx_uctl_ecc_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_60_63 : 4; + uint64_t ecc_err_source : 4; /**< [ 59: 56](RO/H) Source of ECC error, see UCTL_ECC_ERR_SOURCE_E. */ + uint64_t ecc_err_syndrome : 8; /**< [ 55: 48](RO/H) Syndrome bits of the ECC error. */ + uint64_t ecc_err_address : 16; /**< [ 47: 32](RO/H) RAM address of the ECC error. */ + uint64_t reserved_21_31 : 11; + uint64_t uctl_xm_r_ecc_flip_synd : 2;/**< [ 20: 19](R/W) Insert ECC error for testing purposes. */ + uint64_t uctl_xm_r_ecc_cor_dis : 1; /**< [ 18: 18](R/W) Enables ECC correction on UCTL AxiMaster read-data FIFO. */ + uint64_t uctl_xm_w_ecc_flip_synd : 2;/**< [ 17: 16](R/W) Insert ECC error for testing purposes. */ + uint64_t uctl_xm_w_ecc_cor_dis : 1; /**< [ 15: 15](R/W) Enables ECC correction on UCTL AxiMaster write-data FIFO. */ + uint64_t reserved_9_14 : 6; + uint64_t uahc_ram2_ecc_flip_synd : 2;/**< [ 8: 7](R/W) Insert ECC error for testing purposes. */ + uint64_t uahc_ram2_ecc_cor_dis : 1; /**< [ 6: 6](R/W) Enables ECC correction on UAHC RxFIFO RAMs (RAM2). */ + uint64_t uahc_ram1_ecc_flip_synd : 2;/**< [ 5: 4](R/W) Insert ECC error for testing purposes. */ + uint64_t uahc_ram1_ecc_cor_dis : 1; /**< [ 3: 3](R/W) Enables ECC correction on UAHC TxFIFO RAMs (RAM1). */ + uint64_t uahc_ram0_ecc_flip_synd : 2;/**< [ 2: 1](R/W) Insert ECC error for testing purposes. */ + uint64_t uahc_ram0_ecc_cor_dis : 1; /**< [ 0: 0](R/W) Enables ECC correction on UAHC Desc/Reg cache (RAM0). */ +#else /* Word 0 - Little Endian */ + uint64_t uahc_ram0_ecc_cor_dis : 1; /**< [ 0: 0](R/W) Enables ECC correction on UAHC Desc/Reg cache (RAM0). */ + uint64_t uahc_ram0_ecc_flip_synd : 2;/**< [ 2: 1](R/W) Insert ECC error for testing purposes. */ + uint64_t uahc_ram1_ecc_cor_dis : 1; /**< [ 3: 3](R/W) Enables ECC correction on UAHC TxFIFO RAMs (RAM1). */ + uint64_t uahc_ram1_ecc_flip_synd : 2;/**< [ 5: 4](R/W) Insert ECC error for testing purposes. */ + uint64_t uahc_ram2_ecc_cor_dis : 1; /**< [ 6: 6](R/W) Enables ECC correction on UAHC RxFIFO RAMs (RAM2). */ + uint64_t uahc_ram2_ecc_flip_synd : 2;/**< [ 8: 7](R/W) Insert ECC error for testing purposes. */ + uint64_t reserved_9_14 : 6; + uint64_t uctl_xm_w_ecc_cor_dis : 1; /**< [ 15: 15](R/W) Enables ECC correction on UCTL AxiMaster write-data FIFO. */ + uint64_t uctl_xm_w_ecc_flip_synd : 2;/**< [ 17: 16](R/W) Insert ECC error for testing purposes. */ + uint64_t uctl_xm_r_ecc_cor_dis : 1; /**< [ 18: 18](R/W) Enables ECC correction on UCTL AxiMaster read-data FIFO. */ + uint64_t uctl_xm_r_ecc_flip_synd : 2;/**< [ 20: 19](R/W) Insert ECC error for testing purposes. */ + uint64_t reserved_21_31 : 11; + uint64_t ecc_err_address : 16; /**< [ 47: 32](RO/H) RAM address of the ECC error. */ + uint64_t ecc_err_syndrome : 8; /**< [ 55: 48](RO/H) Syndrome bits of the ECC error. */ + uint64_t ecc_err_source : 4; /**< [ 59: 56](RO/H) Source of ECC error, see UCTL_ECC_ERR_SOURCE_E. */ + uint64_t reserved_60_63 : 4; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_ecc_s cn; */ +}; +typedef union bdk_usbhx_uctl_ecc bdk_usbhx_uctl_ecc_t; + +static inline uint64_t BDK_USBHX_UCTL_ECC(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_ECC(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x8680001000f0ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UCTL_ECC", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_ECC(a) bdk_usbhx_uctl_ecc_t +#define bustype_BDK_USBHX_UCTL_ECC(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_ECC(a) "USBHX_UCTL_ECC" +#define device_bar_BDK_USBHX_UCTL_ECC(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_ECC(a) (a) +#define arguments_BDK_USBHX_UCTL_ECC(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uctl_host_cfg + * + * UCTL Host Controller Configuration Register + * This register allows configuration of various host controller (UAHC) features. Most of these + * are strap signals and should be modified only while the controller is not running. + * + * This register is accessible only when USB()_UCTL_CTL[H_CLK_EN] = 1. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UCTL_RST]. + */ +union bdk_usbhx_uctl_host_cfg +{ + uint64_t u; + struct bdk_usbhx_uctl_host_cfg_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_60_63 : 4; + uint64_t host_current_belt : 12; /**< [ 59: 48](RO) This signal indicates the minimum value of all received BELT values and the BELT that is + set by the Set LTV command. */ + uint64_t reserved_38_47 : 10; + uint64_t fla : 6; /**< [ 37: 32](R/W) High-speed jitter adjustment. Indicates the correction required to accommodate mac3 clock + and utmi clock jitter to measure 125 us duration. With FLA tied to 0x0, the high-speed + 125 us micro-frame is counted for 123933 ns. The value needs to be programmed in terms of + high-speed bit times in a 30 MHz cycle. Default value that needs to be driven is 0x20 + (assuming 30 MHz perfect clock). + + FLA connects to the FLADJ register defined in the xHCI spec in the PCI configuration + space. Each count is equal to 16 high-speed bit times. By default when this register is + set to 0x20, it gives 125 us interval. Now, based on the clock accuracy, you can decrement + the count or increment the count to get the 125 us uSOF window. + This is a strap signal; it should only be modified when UAHC is in reset (soft-reset + okay). */ + uint64_t reserved_29_31 : 3; + uint64_t bme : 1; /**< [ 28: 28](R/W) Bus-master enable. This signal is used to disable the bus-mastering capability of the + host. Disabling this capability stalls DMA accesses. */ + uint64_t oci_en : 1; /**< [ 27: 27](R/W) Overcurrent-indication enable. When enabled, OCI input to UAHC is taken from the GPIO + signals and sense-converted based on OCI_ACTIVE_HIGH_EN. The MIO GPIO multiplexer must be + programmed accordingly. + + When disabled, OCI input to UAHC is forced to the correct inactive state based on + OCI_ACTIVE_HIGH_EN. + + This is a strap signal; it should only be modified when UAHC is in reset (soft-reset + okay). */ + uint64_t oci_active_high_en : 1; /**< [ 26: 26](R/W) Overcurrent sense selection. The off-chip sense (high/low) is converted to match the + controller's active-high sense. + 0 = Overcurrent indication from off-chip source is active-low. + 1 = Overcurrent indication from off-chip source is active-high. + + This is a strap signal; it should only be modified when UAHC is in reset (soft-reset + okay). */ + uint64_t ppc_en : 1; /**< [ 25: 25](R/W) Port-power-control enable. + 0 = USBH()_UAHC_HCCPARAMS[PPC] report port-power-control feature is unavailable. + 1 = USBH()_UAHC_HCCPARAMS[PPC] reports port-power-control feature is available. PPC output + from UAHC is taken to the GPIO signals and sense-converted based on PPC_ACTIVE_HIGH_EN. + + The MIO GPIO multiplexer must be programmed accordingly. + + This is a strap signal; it should only be modified when either the UCTL_CTL[UAHC] or + UAHC_GCTL[CoreSoftReset] is asserted. */ + uint64_t ppc_active_high_en : 1; /**< [ 24: 24](R/W) Port power control sense selection. The active-high port-power-control output to off-chip + source is converted to match the off-chip sense. + 0 = Port-power control to off-chip source is active-low. + 1 = Port-power control to off-chip source is active-high. + + This is a strap signal; it should only be modified when either the UCTL_CTL[UAHC] or + UAHC_GCTL[CoreSoftReset] is asserted. */ + uint64_t reserved_0_23 : 24; +#else /* Word 0 - Little Endian */ + uint64_t reserved_0_23 : 24; + uint64_t ppc_active_high_en : 1; /**< [ 24: 24](R/W) Port power control sense selection. The active-high port-power-control output to off-chip + source is converted to match the off-chip sense. + 0 = Port-power control to off-chip source is active-low. + 1 = Port-power control to off-chip source is active-high. + + This is a strap signal; it should only be modified when either the UCTL_CTL[UAHC] or + UAHC_GCTL[CoreSoftReset] is asserted. */ + uint64_t ppc_en : 1; /**< [ 25: 25](R/W) Port-power-control enable. + 0 = USBH()_UAHC_HCCPARAMS[PPC] report port-power-control feature is unavailable. + 1 = USBH()_UAHC_HCCPARAMS[PPC] reports port-power-control feature is available. PPC output + from UAHC is taken to the GPIO signals and sense-converted based on PPC_ACTIVE_HIGH_EN. + + The MIO GPIO multiplexer must be programmed accordingly. + + This is a strap signal; it should only be modified when either the UCTL_CTL[UAHC] or + UAHC_GCTL[CoreSoftReset] is asserted. */ + uint64_t oci_active_high_en : 1; /**< [ 26: 26](R/W) Overcurrent sense selection. The off-chip sense (high/low) is converted to match the + controller's active-high sense. + 0 = Overcurrent indication from off-chip source is active-low. + 1 = Overcurrent indication from off-chip source is active-high. + + This is a strap signal; it should only be modified when UAHC is in reset (soft-reset + okay). */ + uint64_t oci_en : 1; /**< [ 27: 27](R/W) Overcurrent-indication enable. When enabled, OCI input to UAHC is taken from the GPIO + signals and sense-converted based on OCI_ACTIVE_HIGH_EN. The MIO GPIO multiplexer must be + programmed accordingly. + + When disabled, OCI input to UAHC is forced to the correct inactive state based on + OCI_ACTIVE_HIGH_EN. + + This is a strap signal; it should only be modified when UAHC is in reset (soft-reset + okay). */ + uint64_t bme : 1; /**< [ 28: 28](R/W) Bus-master enable. This signal is used to disable the bus-mastering capability of the + host. Disabling this capability stalls DMA accesses. */ + uint64_t reserved_29_31 : 3; + uint64_t fla : 6; /**< [ 37: 32](R/W) High-speed jitter adjustment. Indicates the correction required to accommodate mac3 clock + and utmi clock jitter to measure 125 us duration. With FLA tied to 0x0, the high-speed + 125 us micro-frame is counted for 123933 ns. The value needs to be programmed in terms of + high-speed bit times in a 30 MHz cycle. Default value that needs to be driven is 0x20 + (assuming 30 MHz perfect clock). + + FLA connects to the FLADJ register defined in the xHCI spec in the PCI configuration + space. Each count is equal to 16 high-speed bit times. By default when this register is + set to 0x20, it gives 125 us interval. Now, based on the clock accuracy, you can decrement + the count or increment the count to get the 125 us uSOF window. + This is a strap signal; it should only be modified when UAHC is in reset (soft-reset + okay). */ + uint64_t reserved_38_47 : 10; + uint64_t host_current_belt : 12; /**< [ 59: 48](RO) This signal indicates the minimum value of all received BELT values and the BELT that is + set by the Set LTV command. */ + uint64_t reserved_60_63 : 4; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_host_cfg_s cn; */ +}; +typedef union bdk_usbhx_uctl_host_cfg bdk_usbhx_uctl_host_cfg_t; + +static inline uint64_t BDK_USBHX_UCTL_HOST_CFG(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_HOST_CFG(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x8680001000e0ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UCTL_HOST_CFG", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_HOST_CFG(a) bdk_usbhx_uctl_host_cfg_t +#define bustype_BDK_USBHX_UCTL_HOST_CFG(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_HOST_CFG(a) "USBHX_UCTL_HOST_CFG" +#define device_bar_BDK_USBHX_UCTL_HOST_CFG(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_HOST_CFG(a) (a) +#define arguments_BDK_USBHX_UCTL_HOST_CFG(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uctl_intena_w1c + * + * UCTL Interrupt Status Register + * This register clears interrupt enable bits. + */ +union bdk_usbhx_uctl_intena_w1c +{ + uint64_t u; + struct bdk_usbhx_uctl_intena_w1c_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_30_63 : 34; + uint64_t xm_r_dbe : 1; /**< [ 29: 29](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XM_R_DBE]. */ + uint64_t xm_r_sbe : 1; /**< [ 28: 28](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XM_R_SBE]. */ + uint64_t xm_w_dbe : 1; /**< [ 27: 27](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XM_W_DBE]. */ + uint64_t xm_w_sbe : 1; /**< [ 26: 26](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XM_W_SBE]. */ + uint64_t reserved_22_25 : 4; + uint64_t ram2_dbe : 1; /**< [ 21: 21](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM2_DBE]. */ + uint64_t ram2_sbe : 1; /**< [ 20: 20](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM2_SBE]. */ + uint64_t ram1_dbe : 1; /**< [ 19: 19](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM1_DBE]. */ + uint64_t ram1_sbe : 1; /**< [ 18: 18](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM1_SBE]. */ + uint64_t ram0_dbe : 1; /**< [ 17: 17](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM0_DBE]. */ + uint64_t ram0_sbe : 1; /**< [ 16: 16](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM0_SBE]. */ + uint64_t reserved_8_15 : 8; + uint64_t dma_rd_err : 1; /**< [ 7: 7](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[DMA_RD_ERR]. */ + uint64_t dma_wr_err : 1; /**< [ 6: 6](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[DMA_WR_ERR]. */ + uint64_t reserved_3_5 : 3; + uint64_t xm_bad_dma : 1; /**< [ 2: 2](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XM_BAD_DMA]. */ + uint64_t xs_ncb_oob : 1; /**< [ 1: 1](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XS_NCB_OOB]. */ + uint64_t reserved_0 : 1; +#else /* Word 0 - Little Endian */ + uint64_t reserved_0 : 1; + uint64_t xs_ncb_oob : 1; /**< [ 1: 1](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XS_NCB_OOB]. */ + uint64_t xm_bad_dma : 1; /**< [ 2: 2](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XM_BAD_DMA]. */ + uint64_t reserved_3_5 : 3; + uint64_t dma_wr_err : 1; /**< [ 6: 6](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[DMA_WR_ERR]. */ + uint64_t dma_rd_err : 1; /**< [ 7: 7](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[DMA_RD_ERR]. */ + uint64_t reserved_8_15 : 8; + uint64_t ram0_sbe : 1; /**< [ 16: 16](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM0_SBE]. */ + uint64_t ram0_dbe : 1; /**< [ 17: 17](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM0_DBE]. */ + uint64_t ram1_sbe : 1; /**< [ 18: 18](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM1_SBE]. */ + uint64_t ram1_dbe : 1; /**< [ 19: 19](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM1_DBE]. */ + uint64_t ram2_sbe : 1; /**< [ 20: 20](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM2_SBE]. */ + uint64_t ram2_dbe : 1; /**< [ 21: 21](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[RAM2_DBE]. */ + uint64_t reserved_22_25 : 4; + uint64_t xm_w_sbe : 1; /**< [ 26: 26](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XM_W_SBE]. */ + uint64_t xm_w_dbe : 1; /**< [ 27: 27](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XM_W_DBE]. */ + uint64_t xm_r_sbe : 1; /**< [ 28: 28](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XM_R_SBE]. */ + uint64_t xm_r_dbe : 1; /**< [ 29: 29](R/W1C/H) Reads or clears enable for USBH(0..1)_UCTL_INTSTAT[XM_R_DBE]. */ + uint64_t reserved_30_63 : 34; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_intena_w1c_s cn; */ +}; +typedef union bdk_usbhx_uctl_intena_w1c bdk_usbhx_uctl_intena_w1c_t; + +static inline uint64_t BDK_USBHX_UCTL_INTENA_W1C(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_INTENA_W1C(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000100040ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UCTL_INTENA_W1C", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_INTENA_W1C(a) bdk_usbhx_uctl_intena_w1c_t +#define bustype_BDK_USBHX_UCTL_INTENA_W1C(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_INTENA_W1C(a) "USBHX_UCTL_INTENA_W1C" +#define device_bar_BDK_USBHX_UCTL_INTENA_W1C(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_INTENA_W1C(a) (a) +#define arguments_BDK_USBHX_UCTL_INTENA_W1C(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uctl_intena_w1s + * + * UCTL Interrupt Status Register + * This register sets interrupt enable bits. + */ +union bdk_usbhx_uctl_intena_w1s +{ + uint64_t u; + struct bdk_usbhx_uctl_intena_w1s_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_30_63 : 34; + uint64_t xm_r_dbe : 1; /**< [ 29: 29](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XM_R_DBE]. */ + uint64_t xm_r_sbe : 1; /**< [ 28: 28](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XM_R_SBE]. */ + uint64_t xm_w_dbe : 1; /**< [ 27: 27](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XM_W_DBE]. */ + uint64_t xm_w_sbe : 1; /**< [ 26: 26](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XM_W_SBE]. */ + uint64_t reserved_22_25 : 4; + uint64_t ram2_dbe : 1; /**< [ 21: 21](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM2_DBE]. */ + uint64_t ram2_sbe : 1; /**< [ 20: 20](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM2_SBE]. */ + uint64_t ram1_dbe : 1; /**< [ 19: 19](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM1_DBE]. */ + uint64_t ram1_sbe : 1; /**< [ 18: 18](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM1_SBE]. */ + uint64_t ram0_dbe : 1; /**< [ 17: 17](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM0_DBE]. */ + uint64_t ram0_sbe : 1; /**< [ 16: 16](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM0_SBE]. */ + uint64_t reserved_8_15 : 8; + uint64_t dma_rd_err : 1; /**< [ 7: 7](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[DMA_RD_ERR]. */ + uint64_t dma_wr_err : 1; /**< [ 6: 6](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[DMA_WR_ERR]. */ + uint64_t reserved_3_5 : 3; + uint64_t xm_bad_dma : 1; /**< [ 2: 2](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XM_BAD_DMA]. */ + uint64_t xs_ncb_oob : 1; /**< [ 1: 1](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XS_NCB_OOB]. */ + uint64_t reserved_0 : 1; +#else /* Word 0 - Little Endian */ + uint64_t reserved_0 : 1; + uint64_t xs_ncb_oob : 1; /**< [ 1: 1](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XS_NCB_OOB]. */ + uint64_t xm_bad_dma : 1; /**< [ 2: 2](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XM_BAD_DMA]. */ + uint64_t reserved_3_5 : 3; + uint64_t dma_wr_err : 1; /**< [ 6: 6](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[DMA_WR_ERR]. */ + uint64_t dma_rd_err : 1; /**< [ 7: 7](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[DMA_RD_ERR]. */ + uint64_t reserved_8_15 : 8; + uint64_t ram0_sbe : 1; /**< [ 16: 16](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM0_SBE]. */ + uint64_t ram0_dbe : 1; /**< [ 17: 17](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM0_DBE]. */ + uint64_t ram1_sbe : 1; /**< [ 18: 18](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM1_SBE]. */ + uint64_t ram1_dbe : 1; /**< [ 19: 19](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM1_DBE]. */ + uint64_t ram2_sbe : 1; /**< [ 20: 20](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM2_SBE]. */ + uint64_t ram2_dbe : 1; /**< [ 21: 21](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[RAM2_DBE]. */ + uint64_t reserved_22_25 : 4; + uint64_t xm_w_sbe : 1; /**< [ 26: 26](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XM_W_SBE]. */ + uint64_t xm_w_dbe : 1; /**< [ 27: 27](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XM_W_DBE]. */ + uint64_t xm_r_sbe : 1; /**< [ 28: 28](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XM_R_SBE]. */ + uint64_t xm_r_dbe : 1; /**< [ 29: 29](R/W1S/H) Reads or sets enable for USBH(0..1)_UCTL_INTSTAT[XM_R_DBE]. */ + uint64_t reserved_30_63 : 34; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_intena_w1s_s cn; */ +}; +typedef union bdk_usbhx_uctl_intena_w1s bdk_usbhx_uctl_intena_w1s_t; + +static inline uint64_t BDK_USBHX_UCTL_INTENA_W1S(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_INTENA_W1S(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000100048ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UCTL_INTENA_W1S", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_INTENA_W1S(a) bdk_usbhx_uctl_intena_w1s_t +#define bustype_BDK_USBHX_UCTL_INTENA_W1S(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_INTENA_W1S(a) "USBHX_UCTL_INTENA_W1S" +#define device_bar_BDK_USBHX_UCTL_INTENA_W1S(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_INTENA_W1S(a) (a) +#define arguments_BDK_USBHX_UCTL_INTENA_W1S(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uctl_intstat + * + * UCTL Interrupt Status Register + * This register provides a summary of interrupts. DBEs are detected and + * SBE are corrected. For debugging output for ECC DBEs/SBEs, see USBH()_UCTL_ECC. This register + * can + * be reset by NCB reset. + */ +union bdk_usbhx_uctl_intstat +{ + uint64_t u; + struct bdk_usbhx_uctl_intstat_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_30_63 : 34; + uint64_t xm_r_dbe : 1; /**< [ 29: 29](R/W1C/H) Detected double-bit error on the UCTL AxiMaster read-data FIFO. */ + uint64_t xm_r_sbe : 1; /**< [ 28: 28](R/W1C/H) Detected single-bit error on the UCTL AxiMaster read-data FIFO. */ + uint64_t xm_w_dbe : 1; /**< [ 27: 27](R/W1C/H) Detected double-bit error on the UCTL AxiMaster write-data FIFO. */ + uint64_t xm_w_sbe : 1; /**< [ 26: 26](R/W1C/H) Detected single-bit error on the UCTL AxiMaster write-data FIFO. */ + uint64_t reserved_22_25 : 4; + uint64_t ram2_dbe : 1; /**< [ 21: 21](R/W1C/H) Detected double-bit error on the UAHC RxFIFO RAMs (RAM2). */ + uint64_t ram2_sbe : 1; /**< [ 20: 20](R/W1C/H) Detected single-bit error on the UAHC RxFIFO RAMs (RAM2). */ + uint64_t ram1_dbe : 1; /**< [ 19: 19](R/W1C/H) Detected double-bit error on the UAHC TxFIFO RAMs (RAM1). */ + uint64_t ram1_sbe : 1; /**< [ 18: 18](R/W1C/H) Detected single-bit error on the UAHC TxFIFO RAMs (RAM1). */ + uint64_t ram0_dbe : 1; /**< [ 17: 17](R/W1C/H) Detected double-bit error on the UAHC Desc/Reg Cache (RAM0). */ + uint64_t ram0_sbe : 1; /**< [ 16: 16](R/W1C/H) Detected single-bit error on the UAHC Desc/Reg Cache (RAM0). */ + uint64_t reserved_8_15 : 8; + uint64_t dma_rd_err : 1; /**< [ 7: 7](R/W1C/H) Received DMA read response error from NCBO */ + uint64_t dma_wr_err : 1; /**< [ 6: 6](R/W1C/H) Received DMA write response error from NCBO */ + uint64_t reserved_3_5 : 3; + uint64_t xm_bad_dma : 1; /**< [ 2: 2](R/W1C/H) Detected bad DMA access from UAHC to NCB. Error information is logged in + USBH()_UCTL_SHIM_CFG[XM_BAD_DMA_*]. Received a DMA request from UAHC that violates the + assumptions made by the AXI-to-NCB shim. Such scenarios include: illegal length/size + combinations and address out-of-bounds. + + For more information on exact failures, see the description in + USBH()_UCTL_SHIM_CFG[XM_BAD_DMA_TYPE]. The hardware does not translate the request + correctly + and results may violate NCB protocols. */ + uint64_t xs_ncb_oob : 1; /**< [ 1: 1](R/W1C/H) Detected out-of-bound register access to UAHC over NCB. The UAHC defines 1MB of register + space, starting at offset 0x0. Any accesses outside of this register space cause this bit + to be set to 1. Error information is logged in USBH()_UCTL_SHIM_CFG[XS_NCB_OOB_*]. */ + uint64_t reserved_0 : 1; +#else /* Word 0 - Little Endian */ + uint64_t reserved_0 : 1; + uint64_t xs_ncb_oob : 1; /**< [ 1: 1](R/W1C/H) Detected out-of-bound register access to UAHC over NCB. The UAHC defines 1MB of register + space, starting at offset 0x0. Any accesses outside of this register space cause this bit + to be set to 1. Error information is logged in USBH()_UCTL_SHIM_CFG[XS_NCB_OOB_*]. */ + uint64_t xm_bad_dma : 1; /**< [ 2: 2](R/W1C/H) Detected bad DMA access from UAHC to NCB. Error information is logged in + USBH()_UCTL_SHIM_CFG[XM_BAD_DMA_*]. Received a DMA request from UAHC that violates the + assumptions made by the AXI-to-NCB shim. Such scenarios include: illegal length/size + combinations and address out-of-bounds. + + For more information on exact failures, see the description in + USBH()_UCTL_SHIM_CFG[XM_BAD_DMA_TYPE]. The hardware does not translate the request + correctly + and results may violate NCB protocols. */ + uint64_t reserved_3_5 : 3; + uint64_t dma_wr_err : 1; /**< [ 6: 6](R/W1C/H) Received DMA write response error from NCBO */ + uint64_t dma_rd_err : 1; /**< [ 7: 7](R/W1C/H) Received DMA read response error from NCBO */ + uint64_t reserved_8_15 : 8; + uint64_t ram0_sbe : 1; /**< [ 16: 16](R/W1C/H) Detected single-bit error on the UAHC Desc/Reg Cache (RAM0). */ + uint64_t ram0_dbe : 1; /**< [ 17: 17](R/W1C/H) Detected double-bit error on the UAHC Desc/Reg Cache (RAM0). */ + uint64_t ram1_sbe : 1; /**< [ 18: 18](R/W1C/H) Detected single-bit error on the UAHC TxFIFO RAMs (RAM1). */ + uint64_t ram1_dbe : 1; /**< [ 19: 19](R/W1C/H) Detected double-bit error on the UAHC TxFIFO RAMs (RAM1). */ + uint64_t ram2_sbe : 1; /**< [ 20: 20](R/W1C/H) Detected single-bit error on the UAHC RxFIFO RAMs (RAM2). */ + uint64_t ram2_dbe : 1; /**< [ 21: 21](R/W1C/H) Detected double-bit error on the UAHC RxFIFO RAMs (RAM2). */ + uint64_t reserved_22_25 : 4; + uint64_t xm_w_sbe : 1; /**< [ 26: 26](R/W1C/H) Detected single-bit error on the UCTL AxiMaster write-data FIFO. */ + uint64_t xm_w_dbe : 1; /**< [ 27: 27](R/W1C/H) Detected double-bit error on the UCTL AxiMaster write-data FIFO. */ + uint64_t xm_r_sbe : 1; /**< [ 28: 28](R/W1C/H) Detected single-bit error on the UCTL AxiMaster read-data FIFO. */ + uint64_t xm_r_dbe : 1; /**< [ 29: 29](R/W1C/H) Detected double-bit error on the UCTL AxiMaster read-data FIFO. */ + uint64_t reserved_30_63 : 34; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_intstat_s cn; */ +}; +typedef union bdk_usbhx_uctl_intstat bdk_usbhx_uctl_intstat_t; + +static inline uint64_t BDK_USBHX_UCTL_INTSTAT(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_INTSTAT(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000100030ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UCTL_INTSTAT", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_INTSTAT(a) bdk_usbhx_uctl_intstat_t +#define bustype_BDK_USBHX_UCTL_INTSTAT(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_INTSTAT(a) "USBHX_UCTL_INTSTAT" +#define device_bar_BDK_USBHX_UCTL_INTSTAT(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_INTSTAT(a) (a) +#define arguments_BDK_USBHX_UCTL_INTSTAT(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uctl_intstat_w1s + * + * UCTL Interrupt Status Register + * This register sets interrupt bits. + */ +union bdk_usbhx_uctl_intstat_w1s +{ + uint64_t u; + struct bdk_usbhx_uctl_intstat_w1s_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_30_63 : 34; + uint64_t xm_r_dbe : 1; /**< [ 29: 29](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XM_R_DBE]. */ + uint64_t xm_r_sbe : 1; /**< [ 28: 28](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XM_R_SBE]. */ + uint64_t xm_w_dbe : 1; /**< [ 27: 27](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XM_W_DBE]. */ + uint64_t xm_w_sbe : 1; /**< [ 26: 26](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XM_W_SBE]. */ + uint64_t reserved_22_25 : 4; + uint64_t ram2_dbe : 1; /**< [ 21: 21](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM2_DBE]. */ + uint64_t ram2_sbe : 1; /**< [ 20: 20](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM2_SBE]. */ + uint64_t ram1_dbe : 1; /**< [ 19: 19](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM1_DBE]. */ + uint64_t ram1_sbe : 1; /**< [ 18: 18](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM1_SBE]. */ + uint64_t ram0_dbe : 1; /**< [ 17: 17](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM0_DBE]. */ + uint64_t ram0_sbe : 1; /**< [ 16: 16](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM0_SBE]. */ + uint64_t reserved_8_15 : 8; + uint64_t dma_rd_err : 1; /**< [ 7: 7](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[DMA_RD_ERR]. */ + uint64_t dma_wr_err : 1; /**< [ 6: 6](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[DMA_WR_ERR]. */ + uint64_t reserved_3_5 : 3; + uint64_t xm_bad_dma : 1; /**< [ 2: 2](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XM_BAD_DMA]. */ + uint64_t xs_ncb_oob : 1; /**< [ 1: 1](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XS_NCB_OOB]. */ + uint64_t reserved_0 : 1; +#else /* Word 0 - Little Endian */ + uint64_t reserved_0 : 1; + uint64_t xs_ncb_oob : 1; /**< [ 1: 1](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XS_NCB_OOB]. */ + uint64_t xm_bad_dma : 1; /**< [ 2: 2](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XM_BAD_DMA]. */ + uint64_t reserved_3_5 : 3; + uint64_t dma_wr_err : 1; /**< [ 6: 6](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[DMA_WR_ERR]. */ + uint64_t dma_rd_err : 1; /**< [ 7: 7](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[DMA_RD_ERR]. */ + uint64_t reserved_8_15 : 8; + uint64_t ram0_sbe : 1; /**< [ 16: 16](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM0_SBE]. */ + uint64_t ram0_dbe : 1; /**< [ 17: 17](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM0_DBE]. */ + uint64_t ram1_sbe : 1; /**< [ 18: 18](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM1_SBE]. */ + uint64_t ram1_dbe : 1; /**< [ 19: 19](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM1_DBE]. */ + uint64_t ram2_sbe : 1; /**< [ 20: 20](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM2_SBE]. */ + uint64_t ram2_dbe : 1; /**< [ 21: 21](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[RAM2_DBE]. */ + uint64_t reserved_22_25 : 4; + uint64_t xm_w_sbe : 1; /**< [ 26: 26](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XM_W_SBE]. */ + uint64_t xm_w_dbe : 1; /**< [ 27: 27](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XM_W_DBE]. */ + uint64_t xm_r_sbe : 1; /**< [ 28: 28](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XM_R_SBE]. */ + uint64_t xm_r_dbe : 1; /**< [ 29: 29](R/W1S/H) Reads or sets USBH(0..1)_UCTL_INTSTAT[XM_R_DBE]. */ + uint64_t reserved_30_63 : 34; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_intstat_w1s_s cn; */ +}; +typedef union bdk_usbhx_uctl_intstat_w1s bdk_usbhx_uctl_intstat_w1s_t; + +static inline uint64_t BDK_USBHX_UCTL_INTSTAT_W1S(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_INTSTAT_W1S(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000100038ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UCTL_INTSTAT_W1S", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_INTSTAT_W1S(a) bdk_usbhx_uctl_intstat_w1s_t +#define bustype_BDK_USBHX_UCTL_INTSTAT_W1S(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_INTSTAT_W1S(a) "USBHX_UCTL_INTSTAT_W1S" +#define device_bar_BDK_USBHX_UCTL_INTSTAT_W1S(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_INTSTAT_W1S(a) (a) +#define arguments_BDK_USBHX_UCTL_INTSTAT_W1S(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uctl_port#_cfg_hs + * + * UCTL Port Configuration HighSpeed Register + * This register controls configuration and test controls for the HS port 0 PHY. + * + * This register is accessible only when USB()_UCTL_CTL[H_CLK_EN] = 1. + * + * This register can be reset by NCB reset. + * + * Internal: + * INTERNAL: All these settings are for HS functionality, connect on DVDD power domain. + */ +union bdk_usbhx_uctl_portx_cfg_hs +{ + uint64_t u; + struct bdk_usbhx_uctl_portx_cfg_hs_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_58_63 : 6; + uint64_t comp_dis_tune : 3; /**< [ 57: 55](R/W) Disconnect threshold voltage. Adjusts the voltage level for the threshold used to detect a + disconnect event at the host. + A positive binary bit setting change results in a +1.5% incremental change in the + threshold voltage level, while a negative binary bit setting change results in a -1.5% + incremental change in the threshold voltage level. */ + uint64_t sq_rx_tune : 3; /**< [ 54: 52](R/W) Squelch threshold adjustment. Adjusts the voltage level for the threshold used to detect + valid high-speed data. + A positive binary bit setting change results in a -5% incremental change in threshold + voltage level, while a negative binary bit setting change results in a +5% incremental + change in threshold voltage level. */ + uint64_t tx_fsls_tune : 4; /**< [ 51: 48](R/W) Low-speed/full-speed source impedance adjustment. Adjusts the low- and full-speed single- + ended source impedance while driving high. This parameter control is encoded in + thermometer code. + A positive thermometer code change results in a -2.5% incremental change in source + impedance. A negative thermometer code change results in +2.5% incremental change in + source impedance. Any non-thermometer code setting (that is, 0x9) is not supported and + reserved. */ + uint64_t reserved_46_47 : 2; + uint64_t tx_hs_xv_tune : 2; /**< [ 45: 44](R/W) Transmitter high-speed crossover adjustment. This bus adjusts the voltage at which the DP0 + and DM0 signals cross while transmitting in high-speed mode. + 0x3 = default setting. + 0x2 = +15 mV. + 0x1 = -15 mV. + 0x0 = reserved. */ + uint64_t tx_preemp_amp_tune : 2; /**< [ 43: 42](R/W) High-speed transmitter preemphasis current control. Controls the amount of current + sourced to DP0 and DM0 after a J-to-K or K-to-J transition. The high-speed transmitter + preemphasis current is defined in terms of unit amounts. One unit amount is approximately + 600 A and is defined as 1* preemphasis current. + 0x0 = High-speed TX preemphasis is disabled. + 0x1 = High-speed TX preemphasis circuit sources 1* preemphasis current. + 0x2 = High-speed TX preemphasis circuit sources 2* preemphasis current. + 0x3 = High-speed TX preemphasis circuit sources 3* preemphasis current. + + If these signals are not used, set them to 0x0. */ + uint64_t reserved_41 : 1; + uint64_t tx_preemp_pulse_tune : 1; /**< [ 40: 40](R/W) High-speed transmitter preemphasis duration control. Controls the duration for which the + high-speed preemphasis current is sourced onto DP0 or DM0. The high-speed transmitter + preemphasis duration is defined in terms of unit amounts. One unit of preemphasis duration + is approximately 580 ps and is defined as 1* preemphasis duration. This signal is valid + only if either TX_PREEMP_AMP_TUNE0[1] or TX_PREEMP_AMP_TUNE0[0] is set to 1. + 0 = 2*, long preemphasis current duration (design default). + 1 = 1*, short preemphasis current duration. + + If this signal is not used, set it to 0. */ + uint64_t tx_res_tune : 2; /**< [ 39: 38](R/W) USB source-impedance adjustment. Some applications require additional devices to be added + on the USB, such as a series switch, which can add significant series resistance. This bus + adjusts the driver source impedance to compensate for added series resistance on the USB. + 0x0 = source impedance is decreased by approximately 1.5 ohm. + 0x1 = design default. + 0x2 = source impedance is decreased by approximately 2 ohm. + 0x3 = source impedance is decreased by approximately 4 ohm. + + Any setting other than the default can result in source-impedance variation across + process, voltage, and temperature conditions that does not meet USB 2.0 specification + limits. If this bus is not used, leave it at the default setting. */ + uint64_t tx_rise_tune : 2; /**< [ 37: 36](R/W) High-speed transmitter rise-/fall-time adjustment. Adjusts the rise/fall times of the + high-speed waveform. A positive binary bit setting change results in a -4% incremental + change in the high-speed rise/fall time. A negative binary bit setting change results in a + +4% incremental change in the high-speed rise/fall time. */ + uint64_t tx_vref_tune : 4; /**< [ 35: 32](R/W) High-speed DC voltage-level adjustment. Adjusts the high-speed DC level voltage. + A positive binary-bit-setting change results in a +1.25% incremental change in high-speed + DC voltage level, while a negative binary-bit-setting change results in a -1.25% + incremental change in high-speed DC voltage level. + + The default bit setting is intended to create a HighSpeed transmit + DC level of approximately 400mV. */ + uint64_t reserved_4_31 : 28; + uint64_t vatest_enable : 2; /**< [ 3: 2](R/W) Analog test-pin select. Enables analog test voltages to be placed on the ID0 pin. + 0x0 = Test functionality disabled. + 0x1 = Test functionality enabled. + 0x2, 0x3 = Reserved, invalid settings. + + See also the PHY databook for details on how to select which analog test voltage. */ + uint64_t loopback_enable : 1; /**< [ 1: 1](R/W) Places the high-speed PHY in loopback mode, which concurrently enables high-speed receive + and transmit logic. */ + uint64_t atereset : 1; /**< [ 0: 0](R/W) Per-PHY ATE reset. When the USB core is powered up (not in suspend mode), an automatic + tester can use this to disable PHYCLOCK and FREECLK, then re-enable them with an aligned + phase. + 0 = PHYCLOCK and FREECLK are available within a specific period after ATERESET is + deasserted. + 1 = PHYCLOCK and FREECLK outputs are disabled. */ +#else /* Word 0 - Little Endian */ + uint64_t atereset : 1; /**< [ 0: 0](R/W) Per-PHY ATE reset. When the USB core is powered up (not in suspend mode), an automatic + tester can use this to disable PHYCLOCK and FREECLK, then re-enable them with an aligned + phase. + 0 = PHYCLOCK and FREECLK are available within a specific period after ATERESET is + deasserted. + 1 = PHYCLOCK and FREECLK outputs are disabled. */ + uint64_t loopback_enable : 1; /**< [ 1: 1](R/W) Places the high-speed PHY in loopback mode, which concurrently enables high-speed receive + and transmit logic. */ + uint64_t vatest_enable : 2; /**< [ 3: 2](R/W) Analog test-pin select. Enables analog test voltages to be placed on the ID0 pin. + 0x0 = Test functionality disabled. + 0x1 = Test functionality enabled. + 0x2, 0x3 = Reserved, invalid settings. + + See also the PHY databook for details on how to select which analog test voltage. */ + uint64_t reserved_4_31 : 28; + uint64_t tx_vref_tune : 4; /**< [ 35: 32](R/W) High-speed DC voltage-level adjustment. Adjusts the high-speed DC level voltage. + A positive binary-bit-setting change results in a +1.25% incremental change in high-speed + DC voltage level, while a negative binary-bit-setting change results in a -1.25% + incremental change in high-speed DC voltage level. + + The default bit setting is intended to create a HighSpeed transmit + DC level of approximately 400mV. */ + uint64_t tx_rise_tune : 2; /**< [ 37: 36](R/W) High-speed transmitter rise-/fall-time adjustment. Adjusts the rise/fall times of the + high-speed waveform. A positive binary bit setting change results in a -4% incremental + change in the high-speed rise/fall time. A negative binary bit setting change results in a + +4% incremental change in the high-speed rise/fall time. */ + uint64_t tx_res_tune : 2; /**< [ 39: 38](R/W) USB source-impedance adjustment. Some applications require additional devices to be added + on the USB, such as a series switch, which can add significant series resistance. This bus + adjusts the driver source impedance to compensate for added series resistance on the USB. + 0x0 = source impedance is decreased by approximately 1.5 ohm. + 0x1 = design default. + 0x2 = source impedance is decreased by approximately 2 ohm. + 0x3 = source impedance is decreased by approximately 4 ohm. + + Any setting other than the default can result in source-impedance variation across + process, voltage, and temperature conditions that does not meet USB 2.0 specification + limits. If this bus is not used, leave it at the default setting. */ + uint64_t tx_preemp_pulse_tune : 1; /**< [ 40: 40](R/W) High-speed transmitter preemphasis duration control. Controls the duration for which the + high-speed preemphasis current is sourced onto DP0 or DM0. The high-speed transmitter + preemphasis duration is defined in terms of unit amounts. One unit of preemphasis duration + is approximately 580 ps and is defined as 1* preemphasis duration. This signal is valid + only if either TX_PREEMP_AMP_TUNE0[1] or TX_PREEMP_AMP_TUNE0[0] is set to 1. + 0 = 2*, long preemphasis current duration (design default). + 1 = 1*, short preemphasis current duration. + + If this signal is not used, set it to 0. */ + uint64_t reserved_41 : 1; + uint64_t tx_preemp_amp_tune : 2; /**< [ 43: 42](R/W) High-speed transmitter preemphasis current control. Controls the amount of current + sourced to DP0 and DM0 after a J-to-K or K-to-J transition. The high-speed transmitter + preemphasis current is defined in terms of unit amounts. One unit amount is approximately + 600 A and is defined as 1* preemphasis current. + 0x0 = High-speed TX preemphasis is disabled. + 0x1 = High-speed TX preemphasis circuit sources 1* preemphasis current. + 0x2 = High-speed TX preemphasis circuit sources 2* preemphasis current. + 0x3 = High-speed TX preemphasis circuit sources 3* preemphasis current. + + If these signals are not used, set them to 0x0. */ + uint64_t tx_hs_xv_tune : 2; /**< [ 45: 44](R/W) Transmitter high-speed crossover adjustment. This bus adjusts the voltage at which the DP0 + and DM0 signals cross while transmitting in high-speed mode. + 0x3 = default setting. + 0x2 = +15 mV. + 0x1 = -15 mV. + 0x0 = reserved. */ + uint64_t reserved_46_47 : 2; + uint64_t tx_fsls_tune : 4; /**< [ 51: 48](R/W) Low-speed/full-speed source impedance adjustment. Adjusts the low- and full-speed single- + ended source impedance while driving high. This parameter control is encoded in + thermometer code. + A positive thermometer code change results in a -2.5% incremental change in source + impedance. A negative thermometer code change results in +2.5% incremental change in + source impedance. Any non-thermometer code setting (that is, 0x9) is not supported and + reserved. */ + uint64_t sq_rx_tune : 3; /**< [ 54: 52](R/W) Squelch threshold adjustment. Adjusts the voltage level for the threshold used to detect + valid high-speed data. + A positive binary bit setting change results in a -5% incremental change in threshold + voltage level, while a negative binary bit setting change results in a +5% incremental + change in threshold voltage level. */ + uint64_t comp_dis_tune : 3; /**< [ 57: 55](R/W) Disconnect threshold voltage. Adjusts the voltage level for the threshold used to detect a + disconnect event at the host. + A positive binary bit setting change results in a +1.5% incremental change in the + threshold voltage level, while a negative binary bit setting change results in a -1.5% + incremental change in the threshold voltage level. */ + uint64_t reserved_58_63 : 6; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_portx_cfg_hs_s cn; */ +}; +typedef union bdk_usbhx_uctl_portx_cfg_hs bdk_usbhx_uctl_portx_cfg_hs_t; + +static inline uint64_t BDK_USBHX_UCTL_PORTX_CFG_HS(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_PORTX_CFG_HS(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x868000100050ll + 0x1000000000ll * ((a) & 0x1) + 0x20ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UCTL_PORTX_CFG_HS", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_PORTX_CFG_HS(a,b) bdk_usbhx_uctl_portx_cfg_hs_t +#define bustype_BDK_USBHX_UCTL_PORTX_CFG_HS(a,b) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_PORTX_CFG_HS(a,b) "USBHX_UCTL_PORTX_CFG_HS" +#define device_bar_BDK_USBHX_UCTL_PORTX_CFG_HS(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_PORTX_CFG_HS(a,b) (a) +#define arguments_BDK_USBHX_UCTL_PORTX_CFG_HS(a,b) (a),(b),-1,-1 + +/** + * Register (NCB) usbh#_uctl_port#_cfg_ss + * + * UCTL Port Configuration SuperSpeed Register + * This register controls configuration and test controls for the SS port 0 PHY. + * + * This register is accessible only when USB()_UCTL_CTL[H_CLK_EN] = 1. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UCTL_RST]. + * + * Internal: + * All these settings are for high-speed functionality, connect on DVDD power domain. + */ +union bdk_usbhx_uctl_portx_cfg_ss +{ + uint64_t u; + struct bdk_usbhx_uctl_portx_cfg_ss_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t tx_vboost_lvl : 3; /**< [ 63: 61](R/W) TX voltage-boost level. Sets the boosted transmit launch amplitude (mVppd). The default + bit setting is intended to set the launch amplitude to approximately 1,008 mVppd. A + single, positive binary bit setting change results in a +156 mVppd change in the TX launch + amplitude. + A single, negative binary bit setting change results in a -156 mVppd change in the TX + launch amplitude. All settings more than one binary bit change should not be used. + 0x3 = 0.844 V launch amplitude. + 0x4 = 1.008 V launch amplitude. + 0x5 = 1.156 V launch amplitude. + All others values are invalid. */ + uint64_t los_bias : 3; /**< [ 60: 58](R/W) Loss-of-signal detector threshold-level control. A positive, binary bit setting change + results in a +15 mVp incremental change in the LOS threshold. + A negative binary bit setting change results in a -15 mVp incremental change in the LOS + threshold. The 0x0 setting is reserved and must not be used. The default 0x5 setting + corresponds to approximately 105 mVp. + 0x0 = invalid. + 0x1 = 45 mV. + 0x2 = 60 mV. + 0x3 = 75 mV. + 0x4 = 90 mV. + 0x5 = 105 mV (default). + 0x6 = 120 mV. + 0x7 = 135 mV. */ + uint64_t lane0_ext_pclk_req : 1; /**< [ 57: 57](R/W) When asserted, this signal enables the pipe0_pclk output regardless of power state (along + with the associated increase in power consumption). You can use this input to enable + pipe0_pclk in the P3 state without going through a complete boot sequence. */ + uint64_t lane0_tx2rx_loopbk : 1; /**< [ 56: 56](R/W) When asserted, data from TX predriver is looped back to RX slicers. LOS is bypassed and + based on the tx0_en input so that rx0_los = !tx_data_en. */ + uint64_t reserved_42_55 : 14; + uint64_t pcs_rx_los_mask_val : 10; /**< [ 41: 32](R/W) Configurable loss-of-signal mask width. Sets the number of reference clock cycles to mask + the incoming LFPS in U3 and U2 states. Masks the incoming LFPS for the number of reference + clock cycles equal to the value of pcs_rx_los_mask_val\<9:0\>. This control filters out + short, non-compliant LFPS glitches sent by a noncompliant host. + + For normal operation, set to a targeted mask interval of 10us (value = 10us / Tref_clk). + If the USBH()_UCTL_CTL[REF_CLK_DIV2] is used, then + (value = 10us / (2 * Tref_clk)). These equations are based on the SuperSpeed reference + clock frequency. The value of PCS_RX_LOS_MASK_VAL should be as follows: + + \<pre\> + Frequency DIV2 LOS_MASK + --------- --- -------- + 200 MHz 1 0x3E8 + 125 MHz 0 0x4E2 + 104 MHz 0 0x410 + 100 MHz 0 0x3E8 + 96 MHz 0 0x3C0 + 76.8 MHz 1 0x180 + 52 MHz 0 0x208 + 50 MHz 0 0x1F4 + 48 MHz 0 0x1E0 + 40 MHz 1 0x0C8 + 38.4 MHz 0 0x180 + 26 MHz 0 0x104 + 25 MHz 0 0x0FA + 24 MHz 0 0x0F0 + 20 MHz 0 0x0C8 + 19.2 MHz 0 0x0C0 + \</pre\> + + Setting this bus to 0x0 disables masking. The value should be defined when the PHY is in + reset. Changing this value during operation might disrupt normal operation of the link. */ + uint64_t pcs_tx_deemph_3p5db : 6; /**< [ 31: 26](R/W) Fine-tune transmitter driver deemphasis when set to 3.5db. + This static value sets the TX driver deemphasis value when + USBH()_UAHC_GUSB3PIPECTL()[TXDEEMPHASIS] is set to + 0x1 (according to the PIPE3 specification). The values for transmit deemphasis are derived + from the following equation: + + _ TX de-emphasis (db) = 20 * log_base_10((128 - 2 * pcs_tx_deemph)/128) + + In general, the parameter controls are static signals to be set prior to taking the PHY + out of reset. However, you can dynamically change these values on-the-fly for test + purposes. In this case, changes to the transmitter to reflect the current value occur only + after USBH()_UAHC_GUSB3PIPECTL()[TXDEEMPHASIS] changes. + + Internal: + Default value is package dependant. */ + uint64_t pcs_tx_deemph_6db : 6; /**< [ 25: 20](R/W) Fine-tune transmitter driver deemphasis when set to 6 db. + This static value sets the TX driver deemphasis value when + USBH()_UAHC_GUSB3PIPECTL()[TXDEEMPHASIS] is set to + 0x2 (according to the PIPE3 specification). This bus is provided for completeness and as a + second potential launch amplitude. The values for transmit deemphasis are derived from the + following equation: + + _ TX deemphasis (db) = 20 * log_base_10((128 - 2 * pcs_tx_deemph)/128) + + In general, the parameter controls are static signals to be set prior to taking the PHY + out of reset. However, you can dynamically change these values on-the-fly for test + purposes. In this case, changes to the transmitter to reflect the current value occur only + after USBH()_UAHC_GUSB3PIPECTL()[TXDEEMPHASIS] changes. + + Internal: + Default value is package dependant. */ + uint64_t pcs_tx_swing_full : 7; /**< [ 19: 13](R/W) Launch amplitude of the transmitter. Sets the launch amplitude of the transmitter. The + values for transmit amplitude are derived from the following equation: + TX amplitude (V) = vptx * ((pcs_tx_swing_full + 1)/128) + + In general, the parameter controls are static signals to be set prior to taking the PHY + out of reset. However, you can dynamically change these values on-the-fly for test + purposes. In this case, changes to the transmitter to reflect the current value occur only + after USBH()_UAHC_GUSB3PIPECTL()[TXDEEMPHASIS] changes. + + Internal: + Default value is package dependant. */ + uint64_t lane0_tx_term_offset : 5; /**< [ 12: 8](R/W) Transmitter termination offset. Reserved, set to 0x0. */ + uint64_t reserved_6_7 : 2; + uint64_t res_tune_ack : 1; /**< [ 5: 5](RO/H) Resistor tune acknowledge. While asserted, indicates a resistor tune is in progress. */ + uint64_t res_tune_req : 1; /**< [ 4: 4](R/W) Resistor tune request. The rising edge triggers a resistor tune request (if one is not + already in progress). When asserted, [RES_TUNE_ACK] is asserted high until calibration of + the termination impedance is complete. + Tuning disrupts the normal flow of data; therefore, assert [RES_TUNE_REQ] only when the + PHY + is inactive. The PHY automatically performs a tune when coming out of PRST. */ + uint64_t reserved_0_3 : 4; +#else /* Word 0 - Little Endian */ + uint64_t reserved_0_3 : 4; + uint64_t res_tune_req : 1; /**< [ 4: 4](R/W) Resistor tune request. The rising edge triggers a resistor tune request (if one is not + already in progress). When asserted, [RES_TUNE_ACK] is asserted high until calibration of + the termination impedance is complete. + Tuning disrupts the normal flow of data; therefore, assert [RES_TUNE_REQ] only when the + PHY + is inactive. The PHY automatically performs a tune when coming out of PRST. */ + uint64_t res_tune_ack : 1; /**< [ 5: 5](RO/H) Resistor tune acknowledge. While asserted, indicates a resistor tune is in progress. */ + uint64_t reserved_6_7 : 2; + uint64_t lane0_tx_term_offset : 5; /**< [ 12: 8](R/W) Transmitter termination offset. Reserved, set to 0x0. */ + uint64_t pcs_tx_swing_full : 7; /**< [ 19: 13](R/W) Launch amplitude of the transmitter. Sets the launch amplitude of the transmitter. The + values for transmit amplitude are derived from the following equation: + TX amplitude (V) = vptx * ((pcs_tx_swing_full + 1)/128) + + In general, the parameter controls are static signals to be set prior to taking the PHY + out of reset. However, you can dynamically change these values on-the-fly for test + purposes. In this case, changes to the transmitter to reflect the current value occur only + after USBH()_UAHC_GUSB3PIPECTL()[TXDEEMPHASIS] changes. + + Internal: + Default value is package dependant. */ + uint64_t pcs_tx_deemph_6db : 6; /**< [ 25: 20](R/W) Fine-tune transmitter driver deemphasis when set to 6 db. + This static value sets the TX driver deemphasis value when + USBH()_UAHC_GUSB3PIPECTL()[TXDEEMPHASIS] is set to + 0x2 (according to the PIPE3 specification). This bus is provided for completeness and as a + second potential launch amplitude. The values for transmit deemphasis are derived from the + following equation: + + _ TX deemphasis (db) = 20 * log_base_10((128 - 2 * pcs_tx_deemph)/128) + + In general, the parameter controls are static signals to be set prior to taking the PHY + out of reset. However, you can dynamically change these values on-the-fly for test + purposes. In this case, changes to the transmitter to reflect the current value occur only + after USBH()_UAHC_GUSB3PIPECTL()[TXDEEMPHASIS] changes. + + Internal: + Default value is package dependant. */ + uint64_t pcs_tx_deemph_3p5db : 6; /**< [ 31: 26](R/W) Fine-tune transmitter driver deemphasis when set to 3.5db. + This static value sets the TX driver deemphasis value when + USBH()_UAHC_GUSB3PIPECTL()[TXDEEMPHASIS] is set to + 0x1 (according to the PIPE3 specification). The values for transmit deemphasis are derived + from the following equation: + + _ TX de-emphasis (db) = 20 * log_base_10((128 - 2 * pcs_tx_deemph)/128) + + In general, the parameter controls are static signals to be set prior to taking the PHY + out of reset. However, you can dynamically change these values on-the-fly for test + purposes. In this case, changes to the transmitter to reflect the current value occur only + after USBH()_UAHC_GUSB3PIPECTL()[TXDEEMPHASIS] changes. + + Internal: + Default value is package dependant. */ + uint64_t pcs_rx_los_mask_val : 10; /**< [ 41: 32](R/W) Configurable loss-of-signal mask width. Sets the number of reference clock cycles to mask + the incoming LFPS in U3 and U2 states. Masks the incoming LFPS for the number of reference + clock cycles equal to the value of pcs_rx_los_mask_val\<9:0\>. This control filters out + short, non-compliant LFPS glitches sent by a noncompliant host. + + For normal operation, set to a targeted mask interval of 10us (value = 10us / Tref_clk). + If the USBH()_UCTL_CTL[REF_CLK_DIV2] is used, then + (value = 10us / (2 * Tref_clk)). These equations are based on the SuperSpeed reference + clock frequency. The value of PCS_RX_LOS_MASK_VAL should be as follows: + + \<pre\> + Frequency DIV2 LOS_MASK + --------- --- -------- + 200 MHz 1 0x3E8 + 125 MHz 0 0x4E2 + 104 MHz 0 0x410 + 100 MHz 0 0x3E8 + 96 MHz 0 0x3C0 + 76.8 MHz 1 0x180 + 52 MHz 0 0x208 + 50 MHz 0 0x1F4 + 48 MHz 0 0x1E0 + 40 MHz 1 0x0C8 + 38.4 MHz 0 0x180 + 26 MHz 0 0x104 + 25 MHz 0 0x0FA + 24 MHz 0 0x0F0 + 20 MHz 0 0x0C8 + 19.2 MHz 0 0x0C0 + \</pre\> + + Setting this bus to 0x0 disables masking. The value should be defined when the PHY is in + reset. Changing this value during operation might disrupt normal operation of the link. */ + uint64_t reserved_42_55 : 14; + uint64_t lane0_tx2rx_loopbk : 1; /**< [ 56: 56](R/W) When asserted, data from TX predriver is looped back to RX slicers. LOS is bypassed and + based on the tx0_en input so that rx0_los = !tx_data_en. */ + uint64_t lane0_ext_pclk_req : 1; /**< [ 57: 57](R/W) When asserted, this signal enables the pipe0_pclk output regardless of power state (along + with the associated increase in power consumption). You can use this input to enable + pipe0_pclk in the P3 state without going through a complete boot sequence. */ + uint64_t los_bias : 3; /**< [ 60: 58](R/W) Loss-of-signal detector threshold-level control. A positive, binary bit setting change + results in a +15 mVp incremental change in the LOS threshold. + A negative binary bit setting change results in a -15 mVp incremental change in the LOS + threshold. The 0x0 setting is reserved and must not be used. The default 0x5 setting + corresponds to approximately 105 mVp. + 0x0 = invalid. + 0x1 = 45 mV. + 0x2 = 60 mV. + 0x3 = 75 mV. + 0x4 = 90 mV. + 0x5 = 105 mV (default). + 0x6 = 120 mV. + 0x7 = 135 mV. */ + uint64_t tx_vboost_lvl : 3; /**< [ 63: 61](R/W) TX voltage-boost level. Sets the boosted transmit launch amplitude (mVppd). The default + bit setting is intended to set the launch amplitude to approximately 1,008 mVppd. A + single, positive binary bit setting change results in a +156 mVppd change in the TX launch + amplitude. + A single, negative binary bit setting change results in a -156 mVppd change in the TX + launch amplitude. All settings more than one binary bit change should not be used. + 0x3 = 0.844 V launch amplitude. + 0x4 = 1.008 V launch amplitude. + 0x5 = 1.156 V launch amplitude. + All others values are invalid. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_portx_cfg_ss_s cn; */ +}; +typedef union bdk_usbhx_uctl_portx_cfg_ss bdk_usbhx_uctl_portx_cfg_ss_t; + +static inline uint64_t BDK_USBHX_UCTL_PORTX_CFG_SS(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_PORTX_CFG_SS(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x868000100058ll + 0x1000000000ll * ((a) & 0x1) + 0x20ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UCTL_PORTX_CFG_SS", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_PORTX_CFG_SS(a,b) bdk_usbhx_uctl_portx_cfg_ss_t +#define bustype_BDK_USBHX_UCTL_PORTX_CFG_SS(a,b) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_PORTX_CFG_SS(a,b) "USBHX_UCTL_PORTX_CFG_SS" +#define device_bar_BDK_USBHX_UCTL_PORTX_CFG_SS(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_PORTX_CFG_SS(a,b) (a) +#define arguments_BDK_USBHX_UCTL_PORTX_CFG_SS(a,b) (a),(b),-1,-1 + +/** + * Register (NCB) usbh#_uctl_port#_cr_dbg_cfg + * + * UCTL Port Debug Configuration Register + * This register allows indirect access to the configuration and test controls for the port 0 + * PHY. + * + * This register is accessible only when USB()_UCTL_CTL[H_CLK_EN] = 1. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UCTL_RST]. + * + * Internal: + * (In body of HRM) + * To access the PHY registers indirectly through the CR interface, the HCLK must be running, + * UCTL_RST must be deasserted, and UPHY_RST must be deasserted. Software is responsible for + * ensuring that only one indirect access is ongoing at a time. + * + * To read a PHY register via indirect CR interface: + * 1. Write UCTL_PORTn_CR_DBG_CFG with: + * * [DATA_IN] with the \<\<address\>\> of the register, + * * [CAP_ADDR], [CAP_DATA], [READ], and [WRITE] fields 0x0. + * 2. Write UCTL_PORTn_CR_DBG_CFG with: + * * [DATA_IN] with the \<\<address\>\> of the register, + * * [CAP_ADDR] field 0x1, + * * [CAP_DATA], [READ], and [WRITE] fields 0x0. + * 3. Poll for UCTL_PORTn_CR_DBG_STATUS[ACK] 0x1. + * 4. Write UCTL_PORTn_CR_DBG_CFG with all 0x0's. + * 5. Poll for UCTL_PORTn_CR_DBG_STATUS[ACK] 0x0. + * 6. Write UCTL_PORTn_CR_DBG_CFG with: + * * [READ] field 0x1, + * * [DATA_IN], [CAP_ADDR], [CAP_DATA], and [WRITE] fields 0x0. + * 7. Poll for UCTL_PORTn_CR_DBG_STATUS[ACK] 0x1. + * 8. Read UCTL_PORTn_CR_DBG_STATUS[DATA_OUT]. This is the \<\<read data\>\>. + * 9. Write UCTL_PORTn_CR_DBG_CFG with all 0x0's. + * 10. Poll for UCTL_PORTn_CR_DBG_STATUS[ACK] 0x0. + * + * To write a PHY register via indirect CR interface: + * 1. Write UCTL_PORTn_CR_DBG_CFG with: + * * [DATA_IN] with the \<\<address\>\> of the register, + * * [CAP_ADDR], [CAP_DATA], [READ], and [WRITE] fields 0x0. + * 2. Write UCTL_PORTn_CR_DBG_CFG with: + * * [DATA_IN] with the \<\<address\>\> of the register, + * * [CAP_ADDR] field 0x1, + * * [CAP_DATA], [READ], and [WRITE] fields 0x0. + * 3. Poll for UCTL_PORTn_CR_DBG_STATUS[ACK] 0x1. + * 4. Write UCTL_PORTn_CR_DBG_CFG with all 0x0's. + * 5. Poll for UCTL_PORTn_CR_DBG_STATUS[ACK] 0x0. + * 6. Write UCTL_PORTn_CR_DBG_CFG with: + * * [DATA_IN] with the \<\<write data\>\>, + * * [CAP_ADDR], [CAP_DATA], [READ], and [WRITE] fields 0x0. + * 7. Write UCTL_PORTn_CR_DBG_CFG with: + * * [DATA_IN] with the write data, + * * [CAP_DATA] field 0x1, + * * [CAP_ADDR], [READ], and [WRITE] fields 0x0. + * 8. Poll for UCTL_PORTn_CR_DBG_STATUS[ACK] 0x1. + * 9. Write UCTL_PORTn_CR_DBG_CFG with all 0x0's. + * 10. Poll for UCTL_PORTn_CR_DBG_STATUS[ACK] 0x0. + * 11. Write UCTL_PORTn_CR_DBG_CFG with: + * * [WRITE] field 0x1, + * * [DATA_IN], [CAP_ADDR], and [READ] fields 0x0. + * 12. Poll for UCTL_PORTn_CR_DBG_STATUS[ACK] 0x1. + * 13. Write UCTL_PORTn_CR_DBG_CFG with all 0x0's. + * 14. Poll for UCTL_PORTn_CR_DBG_STATUS[ACK] 0x0. + * + * For partial writes, a read-modify write is required. Note that the CAP_ADDR steps (1-5) + * do not have to be repeated until the address needs changed. + */ +union bdk_usbhx_uctl_portx_cr_dbg_cfg +{ + uint64_t u; + struct bdk_usbhx_uctl_portx_cr_dbg_cfg_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_48_63 : 16; + uint64_t data_in : 16; /**< [ 47: 32](R/W) Address or data to be written to the CR interface. */ + uint64_t reserved_4_31 : 28; + uint64_t cap_addr : 1; /**< [ 3: 3](R/W) Rising edge triggers the [DATA_IN] field to be captured as the address. */ + uint64_t cap_data : 1; /**< [ 2: 2](R/W) Rising edge triggers the [DATA_IN] field to be captured as the write data. */ + uint64_t read : 1; /**< [ 1: 1](R/W) Rising edge triggers a register read operation of the captured address. */ + uint64_t write : 1; /**< [ 0: 0](R/W) Rising edge triggers a register write operation of the captured address with the captured data. */ +#else /* Word 0 - Little Endian */ + uint64_t write : 1; /**< [ 0: 0](R/W) Rising edge triggers a register write operation of the captured address with the captured data. */ + uint64_t read : 1; /**< [ 1: 1](R/W) Rising edge triggers a register read operation of the captured address. */ + uint64_t cap_data : 1; /**< [ 2: 2](R/W) Rising edge triggers the [DATA_IN] field to be captured as the write data. */ + uint64_t cap_addr : 1; /**< [ 3: 3](R/W) Rising edge triggers the [DATA_IN] field to be captured as the address. */ + uint64_t reserved_4_31 : 28; + uint64_t data_in : 16; /**< [ 47: 32](R/W) Address or data to be written to the CR interface. */ + uint64_t reserved_48_63 : 16; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_portx_cr_dbg_cfg_s cn; */ +}; +typedef union bdk_usbhx_uctl_portx_cr_dbg_cfg bdk_usbhx_uctl_portx_cr_dbg_cfg_t; + +static inline uint64_t BDK_USBHX_UCTL_PORTX_CR_DBG_CFG(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_PORTX_CR_DBG_CFG(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x868000100060ll + 0x1000000000ll * ((a) & 0x1) + 0ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UCTL_PORTX_CR_DBG_CFG", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_PORTX_CR_DBG_CFG(a,b) bdk_usbhx_uctl_portx_cr_dbg_cfg_t +#define bustype_BDK_USBHX_UCTL_PORTX_CR_DBG_CFG(a,b) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_PORTX_CR_DBG_CFG(a,b) "USBHX_UCTL_PORTX_CR_DBG_CFG" +#define device_bar_BDK_USBHX_UCTL_PORTX_CR_DBG_CFG(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_PORTX_CR_DBG_CFG(a,b) (a) +#define arguments_BDK_USBHX_UCTL_PORTX_CR_DBG_CFG(a,b) (a),(b),-1,-1 + +/** + * Register (NCB) usbh#_uctl_port#_cr_dbg_status + * + * UCTL Port Debug Status Register + * This register allows indirect access to the configuration and test controls for the port 0 + * PHY. + * + * This register is accessible only when USB()_UCTL_CTL[H_CLK_EN] = 1. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UCTL_RST]. + */ +union bdk_usbhx_uctl_portx_cr_dbg_status +{ + uint64_t u; + struct bdk_usbhx_uctl_portx_cr_dbg_status_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t reserved_48_63 : 16; + uint64_t data_out : 16; /**< [ 47: 32](RO/H) Last data read from the CR interface. */ + uint64_t reserved_1_31 : 31; + uint64_t ack : 1; /**< [ 0: 0](RO/H) Acknowledge that the CAP_ADDR, CAP_DATA, READ, WRITE commands have completed. */ +#else /* Word 0 - Little Endian */ + uint64_t ack : 1; /**< [ 0: 0](RO/H) Acknowledge that the CAP_ADDR, CAP_DATA, READ, WRITE commands have completed. */ + uint64_t reserved_1_31 : 31; + uint64_t data_out : 16; /**< [ 47: 32](RO/H) Last data read from the CR interface. */ + uint64_t reserved_48_63 : 16; +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_portx_cr_dbg_status_s cn; */ +}; +typedef union bdk_usbhx_uctl_portx_cr_dbg_status bdk_usbhx_uctl_portx_cr_dbg_status_t; + +static inline uint64_t BDK_USBHX_UCTL_PORTX_CR_DBG_STATUS(unsigned long a, unsigned long b) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_PORTX_CR_DBG_STATUS(unsigned long a, unsigned long b) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && ((a<=1) && (b==0))) + return 0x868000100068ll + 0x1000000000ll * ((a) & 0x1) + 0ll * ((b) & 0x0); + __bdk_csr_fatal("USBHX_UCTL_PORTX_CR_DBG_STATUS", 2, a, b, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_PORTX_CR_DBG_STATUS(a,b) bdk_usbhx_uctl_portx_cr_dbg_status_t +#define bustype_BDK_USBHX_UCTL_PORTX_CR_DBG_STATUS(a,b) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_PORTX_CR_DBG_STATUS(a,b) "USBHX_UCTL_PORTX_CR_DBG_STATUS" +#define device_bar_BDK_USBHX_UCTL_PORTX_CR_DBG_STATUS(a,b) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_PORTX_CR_DBG_STATUS(a,b) (a) +#define arguments_BDK_USBHX_UCTL_PORTX_CR_DBG_STATUS(a,b) (a),(b),-1,-1 + +/** + * Register (NCB) usbh#_uctl_shim_cfg + * + * UCTL Shim Configuration Register + * This register allows configuration of various shim (UCTL) features. The fields XS_NCB_OOB_* + * are captured when there are no outstanding OOB errors indicated in INTSTAT and a new OOB error + * arrives. The fields XS_BAD_DMA_* are captured when there are no outstanding DMA errors + * indicated in INTSTAT and a new DMA error arrives. + * + * This register is accessible only when USB()_UCTL_CTL[H_CLK_EN] = 1. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UCTL_RST]. + */ +union bdk_usbhx_uctl_shim_cfg +{ + uint64_t u; + struct bdk_usbhx_uctl_shim_cfg_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t xs_ncb_oob_wrn : 1; /**< [ 63: 63](RO/H) Read/write error log for out-of-bound UAHC register access. + 0 = read, 1 = write. */ + uint64_t reserved_60_62 : 3; + uint64_t xs_ncb_oob_osrc : 12; /**< [ 59: 48](RO/H) SRCID error log for out-of-bound UAHC register access. The NCB outbound SRCID for the OOB + error. + \<59:58\> = chipID. + \<57\> = Request source: 0 = core, 1 = NCB-device. + \<56:51\> = Core/NCB-device number. Note that for NCB devices, \<56\> is always 0. + \<50:48\> = SubID. */ + uint64_t xm_bad_dma_wrn : 1; /**< [ 47: 47](RO/H) Read/write error log for bad DMA access from UAHC. + 0 = read error log, 1 = write error log. */ + uint64_t reserved_44_46 : 3; + uint64_t xm_bad_dma_type : 4; /**< [ 43: 40](RO/H) ErrType error log for bad DMA access from UAHC. Encodes the type of error encountered + (error largest encoded value has priority). See UCTL_XM_BAD_DMA_TYPE_E. */ + uint64_t reserved_14_39 : 26; + uint64_t dma_read_cmd : 2; /**< [ 13: 12](R/W) Selects the NCB read command used by DMA accesses. See UCTL_DMA_READ_CMD_E. */ + uint64_t reserved_11 : 1; + uint64_t dma_write_cmd : 1; /**< [ 10: 10](R/W) Selects the NCB write command used by DMA accesses. See UCTL_DMA_WRITE_CMD_E. */ + uint64_t reserved_0_9 : 10; +#else /* Word 0 - Little Endian */ + uint64_t reserved_0_9 : 10; + uint64_t dma_write_cmd : 1; /**< [ 10: 10](R/W) Selects the NCB write command used by DMA accesses. See UCTL_DMA_WRITE_CMD_E. */ + uint64_t reserved_11 : 1; + uint64_t dma_read_cmd : 2; /**< [ 13: 12](R/W) Selects the NCB read command used by DMA accesses. See UCTL_DMA_READ_CMD_E. */ + uint64_t reserved_14_39 : 26; + uint64_t xm_bad_dma_type : 4; /**< [ 43: 40](RO/H) ErrType error log for bad DMA access from UAHC. Encodes the type of error encountered + (error largest encoded value has priority). See UCTL_XM_BAD_DMA_TYPE_E. */ + uint64_t reserved_44_46 : 3; + uint64_t xm_bad_dma_wrn : 1; /**< [ 47: 47](RO/H) Read/write error log for bad DMA access from UAHC. + 0 = read error log, 1 = write error log. */ + uint64_t xs_ncb_oob_osrc : 12; /**< [ 59: 48](RO/H) SRCID error log for out-of-bound UAHC register access. The NCB outbound SRCID for the OOB + error. + \<59:58\> = chipID. + \<57\> = Request source: 0 = core, 1 = NCB-device. + \<56:51\> = Core/NCB-device number. Note that for NCB devices, \<56\> is always 0. + \<50:48\> = SubID. */ + uint64_t reserved_60_62 : 3; + uint64_t xs_ncb_oob_wrn : 1; /**< [ 63: 63](RO/H) Read/write error log for out-of-bound UAHC register access. + 0 = read, 1 = write. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_shim_cfg_s cn; */ +}; +typedef union bdk_usbhx_uctl_shim_cfg bdk_usbhx_uctl_shim_cfg_t; + +static inline uint64_t BDK_USBHX_UCTL_SHIM_CFG(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_SHIM_CFG(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x8680001000e8ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UCTL_SHIM_CFG", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_SHIM_CFG(a) bdk_usbhx_uctl_shim_cfg_t +#define bustype_BDK_USBHX_UCTL_SHIM_CFG(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_SHIM_CFG(a) "USBHX_UCTL_SHIM_CFG" +#define device_bar_BDK_USBHX_UCTL_SHIM_CFG(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_SHIM_CFG(a) (a) +#define arguments_BDK_USBHX_UCTL_SHIM_CFG(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uctl_spare0 + * + * UCTL Spare Register 0 + * This register is a spare register. This register can be reset by NCB reset. + */ +union bdk_usbhx_uctl_spare0 +{ + uint64_t u; + struct bdk_usbhx_uctl_spare0_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t spare : 64; /**< [ 63: 0](R/W) Spare. */ +#else /* Word 0 - Little Endian */ + uint64_t spare : 64; /**< [ 63: 0](R/W) Spare. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_spare0_s cn; */ +}; +typedef union bdk_usbhx_uctl_spare0 bdk_usbhx_uctl_spare0_t; + +static inline uint64_t BDK_USBHX_UCTL_SPARE0(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_SPARE0(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x868000100010ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UCTL_SPARE0", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_SPARE0(a) bdk_usbhx_uctl_spare0_t +#define bustype_BDK_USBHX_UCTL_SPARE0(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_SPARE0(a) "USBHX_UCTL_SPARE0" +#define device_bar_BDK_USBHX_UCTL_SPARE0(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_SPARE0(a) (a) +#define arguments_BDK_USBHX_UCTL_SPARE0(a) (a),-1,-1,-1 + +/** + * Register (NCB) usbh#_uctl_spare1 + * + * UCTL Spare Register 1 + * This register is accessible only when USB()_UCTL_CTL[H_CLK_EN] = 1. + * + * This register can be reset by NCB reset or with USBH()_UCTL_CTL[UCTL_RST]. + */ +union bdk_usbhx_uctl_spare1 +{ + uint64_t u; + struct bdk_usbhx_uctl_spare1_s + { +#if __BYTE_ORDER == __BIG_ENDIAN /* Word 0 - Big Endian */ + uint64_t spare : 64; /**< [ 63: 0](R/W) Spare. */ +#else /* Word 0 - Little Endian */ + uint64_t spare : 64; /**< [ 63: 0](R/W) Spare. */ +#endif /* Word 0 - End */ + } s; + /* struct bdk_usbhx_uctl_spare1_s cn; */ +}; +typedef union bdk_usbhx_uctl_spare1 bdk_usbhx_uctl_spare1_t; + +static inline uint64_t BDK_USBHX_UCTL_SPARE1(unsigned long a) __attribute__ ((pure, always_inline)); +static inline uint64_t BDK_USBHX_UCTL_SPARE1(unsigned long a) +{ + if (CAVIUM_IS_MODEL(CAVIUM_CN88XX) && (a<=1)) + return 0x8680001000f8ll + 0x1000000000ll * ((a) & 0x1); + __bdk_csr_fatal("USBHX_UCTL_SPARE1", 1, a, 0, 0, 0); +} + +#define typedef_BDK_USBHX_UCTL_SPARE1(a) bdk_usbhx_uctl_spare1_t +#define bustype_BDK_USBHX_UCTL_SPARE1(a) BDK_CSR_TYPE_NCB +#define basename_BDK_USBHX_UCTL_SPARE1(a) "USBHX_UCTL_SPARE1" +#define device_bar_BDK_USBHX_UCTL_SPARE1(a) 0x0 /* PF_BAR0 */ +#define busnum_BDK_USBHX_UCTL_SPARE1(a) (a) +#define arguments_BDK_USBHX_UCTL_SPARE1(a) (a),-1,-1,-1 + +#endif /* __BDK_CSRS_USBH_H__ */ |