AMD Kabini: Add AGESA/PI code for new processor family

Change-Id: Icb6f64e2e3cfd678fb4fb4f13f0e4b678d5acc4a
Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com>
Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com>
Reviewed-by: Nick Dill <nick.dill@se-eng.com>
Tested-by: Bruce Griffith <bruce.griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/3836
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>

13 files changed, 4025 insertions, 0 deletions

diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.c
new file mode 100644
index 0000000000..113386e20b
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.c
@@ -0,0 +1,235 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt3.c
+ *
+ * Common Technology  functions for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mtspd3.h"
+#include "mtot3.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+/* features */
+#define FILECODE PROC_MEM_TECH_DDR3_MT3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function Constructs the technology block
+ *
+ *     @param[in,out]   *NBPtr   - Pointer to the MEM_NB_BLOCK
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+BOOLEAN
+MemConstructTechBlock3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  )
+{
+  TECHNOLOGY_TYPE *TechTypePtr;
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 i;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  UINT8 DimmSlots;
+
+
+  TechTypePtr = (TECHNOLOGY_TYPE *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_MEM_TECH, NBPtr->MCTPtr->SocketId, 0, 0, NULL, NULL);
+  if (TechTypePtr != NULL) {
+    // Ensure the platform override value is valid
+    ASSERT ((*TechTypePtr == DDR3_TECHNOLOGY) || (*TechTypePtr == DDR2_TECHNOLOGY));
+    if (*TechTypePtr != DDR3_TECHNOLOGY) {
+      return FALSE;
+    }
+  }
+
+  TechPtr->NBPtr = NBPtr;
+  TechPtr->RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  TechPtr->SendAllMRCmds = MemTSendAllMRCmds3;
+  TechPtr->FreqChgCtrlWrd = FreqChgCtrlWrd3;
+  TechPtr->SetDramMode = MemTSetDramMode3;
+  TechPtr->DimmPresence = MemTDIMMPresence3;
+  TechPtr->SpdCalcWidth = MemTSPDCalcWidth3;
+  TechPtr->SpdGetTargetSpeed = MemTSPDGetTargetSpeed3;
+  TechPtr->AutoCycTiming = MemTAutoCycTiming3;
+  TechPtr->SpdSetBanks = MemTSPDSetBanks3;
+  TechPtr->SetDqsEccTmgs = MemTSetDQSEccTmgs;
+  TechPtr->GetCSIntLvAddr = MemTGetCSIntLvAddr3;
+  TechPtr->AdjustTwrwr = MemTAdjustTwrwr3;
+  TechPtr->AdjustTwrrd = MemTAdjustTwrrd3;
+  TechPtr->GetDimmSpdBuffer = MemTGetDimmSpdBuffer3;
+  TechPtr->GetLD = MemTGetLD3;
+  TechPtr->MaxFilterDly = 0;
+
+  //
+  // Map the Logical Dimms on this channel to the SPD that should be used for that logical DIMM.
+  // The pointers to the DIMM SPD information is as follows (2 Dimm/Ch and 3 Dimm/Ch examples).
+  //
+  //    DIMM Spd Buffer                          Current Channel DimmSpdPtr[MAX_DIMMS_PER_CHANNEL] array
+  //    (Number of dimms varies by platform)     (Array size is determined in AGESA.H) Dimm operations loop
+  //                                              on this array only)
+  //    2 DIMMS PER CHANNEL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1 SR/DR DIMM <--------------DimmSpdPtr[1]
+  //                                                         DimmSpdPtr[2]------->NULL
+  //                                                         DimmSpdPtr[3]------->NULL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1    QR DIMM <---------+----DimmSpdPtr[1]
+  //                                                    |    DimmSpdPtr[2]------->NULL
+  //                                                    +----DimmSpdPtr[3]
+  //
+  //    Socket N  Channel N Dimm 0    QR DIMM <-----+--------DimmSpdPtr[0]
+  //                        Dimm 1    QR DIMM <-----|---+----DimmSpdPtr[1]
+  //                                                +-- | ---DimmSpdPtr[2]
+  //                                                    +----DimmSpdPtr[3]
+  //
+  //    3 DIMMS PER CHANNEL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1 SR/DR DIMM <--------------DimmSpdPtr[1]
+  //                        Dimm 3 SR/DR DIMM <--------------DimmSpdPtr[2]
+  //                                                         DimmSpdPtr[3]------->NULL
+  //
+  //    Socket N  Channel N Dimm 0 SR/DR DIMM <--------------DimmSpdPtr[0]
+  //                        Dimm 1    QR DIMM <---------+----DimmSpdPtr[1]
+  //                        Dimm 3 SR/DR DIMM <-------- | ---DimmSpdPtr[2]
+  //                                                    +----DimmSpdPtr[3]
+  //
+  //
+  //    FOR LRDIMMS
+  //
+  //    This code will assign SPD pointers on the basis of Physical ranks, even though
+  //    an LRDIMM may only use one or two logical ranks, that determination will have to
+  //    be made from downstream code.  An LRDIMM with greater than 2 Physical ranks will have
+  //    its DimmSpdPtr[] mapped as if it were a QR in the above diagrams.
+
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+    for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+      NBPtr->SwitchChannel (NBPtr, Channel);
+      ChannelPtr = NBPtr->ChannelPtr;
+      ChannelPtr->TechType = DDR3_TECHNOLOGY;
+      ChannelPtr->MCTPtr = MCTPtr;
+      ChannelPtr->DCTPtr = DCTPtr;
+
+      DimmSlots = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                         MCTPtr->SocketId,
+                                         NBPtr->GetSocketRelativeChannel (NBPtr, Dct, Channel)
+                                        );
+      //
+      // Initialize the SPD pointers for each Dimm
+      //
+      for (i = 0 ; i < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0])) ; i++) {
+        ChannelPtr->DimmSpdPtr[i] = NULL;
+      }
+      for (i = 0 ; i < DimmSlots; i++) {
+        ChannelPtr->DimmSpdPtr[i] = &(ChannelPtr->SpdPtr[i]);
+        if ( (i + 2) < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0]))) {
+          if (ChannelPtr->DimmSpdPtr[i]->DimmPresent) {
+            if ((((ChannelPtr->DimmSpdPtr[i]->Data[SPD_RANKS] >> 3) & 0x07) + 1) > 2) {
+              ChannelPtr->DimmSpdPtr[i + 2] = &(ChannelPtr->SpdPtr[i]);
+            }
+          }
+        }
+      }
+    }
+  }
+  // Initialize Common technology functions
+  MemTCommonTechInit (TechPtr);
+
+  return TRUE;
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.h
new file mode 100644
index 0000000000..d737449b05
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mt3.h
@@ -0,0 +1,134 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mt3.h
+ *
+ * Common Technology
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MT3_H_
+#define _MT3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+MemConstructTechBlock3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   MEM_NB_BLOCK *NBPtr
+  );
+BOOLEAN
+MemTSetDramMode3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTDIMMPresence3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSPDCalcWidth3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSPDGetTargetSpeed3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTAutoCycTiming3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+MemTSPDSetBanks3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTGetCSIntLvAddr3 (
+  IN       UINT8 BankEnc,
+  OUT      UINT8 *LowBit,
+  OUT      UINT8 *HiBit
+  );
+
+VOID
+MemTSendAllMRCmds3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  );
+
+VOID
+FreqChgCtrlWrd3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+
+BOOLEAN
+MemTGetDimmSpdBuffer3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT8 **SpdBuffer,
+  IN       UINT8 Dimm
+  );
+#endif  /* _MT3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtlrdimm3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtlrdimm3.h
new file mode 100644
index 0000000000..1ace78b00d
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtlrdimm3.h
@@ -0,0 +1,132 @@
+/**
+ * @file
+ *
+ * mtlrdimm3.h
+ *
+ * Definitions and declarations for DDR3 LRDIMM support
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTLRDIMM3_H_
+#define _MTLRDIMM3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+#define RCW_FN_SELECT 7
+
+#define F0 0
+#define F1 1
+#define F2 2
+#define F3 3
+#define F4 4
+#define F5 5
+#define F6 6
+#define F7 7
+#define F8 8
+#define F9 9
+#define F10 10
+#define F11 11
+#define F12 12
+#define F13 13
+#define F14 14
+#define F15 15
+
+#define RC0 0
+#define RC1 1
+#define RC2 2
+#define RC3 3
+#define RC4 4
+#define RC5 5
+#define RC6 6
+#define RC7 7
+#define RC8 8
+#define RC9 9
+#define RC10 10
+#define RC11 11
+#define RC12 12
+#define RC13 13
+#define RC14 14
+#define RC15 15
+
+#define SPD_NONE             0
+#define SPD_67               67
+#define SPD_68               68
+#define SPD_69               69
+#define SPD_70               70
+#define SPD_71               71
+
+#define SPD_MDQ_800_1066     72
+#define SPD_QXODT_800_1066   73
+#define SPD_MR1_MR2_800_1066 77
+#define SPD_PERSONALITY_BYTE 102
+#define SPD_FREQ_DIFF_OFFSET 6
+
+#define SPECIAL_CASE         0xFF
+#define WAIT_6US             0xF6
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/// LRDIMM SPECIALIZED HOOK ENTRY POINTS
+typedef enum {
+  AFTER_TSTAB,          ///< Time point after tStab
+  AFTER_RCW,            ///< Time point after LrDimm Rcw commands are sent
+  BEFORE_BUFFERTRN,     ///< Time point just before Buffer training
+  AFTER_BUFFERTRN,      ///< Time point just after Buffer training
+  BEFORE_HOST_WL,       ///< Time point before host WL
+  AFTER_HOST_WL         ///< Time point after host WL
+} LRDIMM_HOOK_ENTRYPOINT;
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+#endif  /* _MTLRDIMM3_H_ */
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.c
new file mode 100644
index 0000000000..41834f103a
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.c
@@ -0,0 +1,167 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtot3.c
+ *
+ * Technology Non-SPD Timings for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mtot3.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTOT3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function adjusts the Twrwr value for DDR3.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTAdjustTwrwr3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  DCT_STRUCT *DCTPtr;
+
+  DCTPtr = TechPtr->NBPtr->DCTPtr;
+
+  // For DDR3, value 0000b-0001b and >= 1011b of Twrwr is reserved.
+  if (DCTPtr->Timings.Twrwr < 2) {
+    DCTPtr->Timings.Twrwr = 2;
+  } else if (DCTPtr->Timings.Twrwr > 10) {
+    DCTPtr->Timings.Twrwr = 10;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function adjusts the Twrrd value for DDR3.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTAdjustTwrrd3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  DCT_STRUCT *DCTPtr;
+
+  DCTPtr = TechPtr->NBPtr->DCTPtr;
+
+  // For DDR3, value 0000b, 0001b, and > 1010b of Twrrd is reserved.
+  if (DCTPtr->Timings.Twrrd < 2) {
+    DCTPtr->Timings.Twrrd = 2;
+  } else if (DCTPtr->Timings.Twrrd > 10) {
+    DCTPtr->Timings.Twrrd = 10;
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function gets the LD value for DDR3.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  Value of LD
+ */
+
+INT8
+MemTGetLD3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  INT8 LD;
+  MEM_NB_BLOCK *NBPtr;
+  NBPtr = TechPtr->NBPtr;
+  //
+  // For DDR3, BIOS calculates the latency difference (Ld) as equal to read CAS latency minus write CAS
+  // latency, in MEMCLKs (see F2x[1, 0]88[Tcl] and F2x[1, 0]84[Tcwl]) which can be a negative or positive
+  // value.
+  //
+  LD = ((INT8) NBPtr->GetBitField (NBPtr, BFTcl) + 4) - ((INT8) NBPtr->GetBitField (NBPtr, BFTcwl) + 5);
+
+  return LD;
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.h
new file mode 100644
index 0000000000..05f0c41a72
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtot3.h
@@ -0,0 +1,90 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtot3.h
+ *
+ * Technology Non-SPD timings for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTOT3_H_
+#define _MTOT3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+VOID
+MemTAdjustTwrwr3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTAdjustTwrrd3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+INT8
+MemTGetLD3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+#endif  /* _MTOT3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.c
new file mode 100644
index 0000000000..bc7a5a0b08
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.c
@@ -0,0 +1,318 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtrci3.c
+ *
+ * Technology Control word initialization for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mtrci3.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTRCI3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends control words
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTDramControlRegInit3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 ChipSel;
+  UINT8 i;
+  UINT8 RawCard;
+  UINT8 Data;
+  UINT16 CsPresent;
+
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  CsPresent = NBPtr->DCTPtr->Timings.CsPresent;
+
+  MemUWait10ns (800, MemPtr);   // wait 8us TACT must be changed to optimize to 8 MEM CLKs
+
+  // Set EnDramInit to start DRAM initialization
+
+  MemUWait10ns (600, MemPtr);   // wait 6us for PLL LOCK
+
+  for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+    //
+    // If chip select present
+    //
+    if ((CsPresent & ((UINT16)3 << ChipSel)) != 0) {
+      NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+
+      // 2. Program F2x[1, 0]A8[CtrlWordCS]=bit mask for target chip selects.
+      NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (ChipSel & 0xFE));
+
+      RawCard = NBPtr->ChannelPtr->RefRawCard[ChipSel >> 1];
+
+      for (i = 0; i <= 15; i++) {
+        // wait 8us for TMRD, must be changed to optimize to 8 MEM CLKs
+        MemUWait10ns (800, MemPtr);
+        if ((i != 6) && (i != 7)) {
+          Data = MemTGetCtlWord3 (TechPtr, i, RawCard, ChipSel);
+          MemTSendCtlWord3 (TechPtr, i, Data);
+        }
+      }
+    }
+  }
+  MemUWait10ns (600, MemPtr);   // wait 6us for TSTAB
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the ControlRC value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]     CtrlWordNum  -  control Word number.
+ *     @param[in]     RawCard  -  Raw Card
+ *     @param[in]     ChipSel  - Target Chip Select
+ *     @return  Control Word value
+ */
+
+UINT8
+MemTGetCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 CtrlWordNum,
+  IN       UINT8 RawCard,
+  IN       UINT8 ChipSel
+  )
+{
+  UINT8  Data;
+  UINT8  PowerDownMode;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  DCTPtr = TechPtr->NBPtr->DCTPtr;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  Data = 0;  //Default value for all control words is 0
+  switch (CtrlWordNum) {
+  case 0:
+    Data = 0x02;  // DA4=1
+    break;
+  case 1:
+    if (DCTPtr->Timings.DimmSRPresent & ((UINT16) 1 << (ChipSel >> 1))) {
+      Data = 0x0C;  // if single rank, set DBA1 and DBA0
+    }
+    break;
+  case 2:
+    Data = ChannelPtr->CtrlWrd02[ChipSel >> 1];
+    break;
+  case 3:
+    Data = ChannelPtr->CtrlWrd03[ChipSel >> 1];
+    break;
+  case 4:
+    Data = ChannelPtr->CtrlWrd04[ChipSel >> 1];
+    break;
+  case 5:
+    Data = ChannelPtr->CtrlWrd05[ChipSel >> 1];
+    break;
+  case 8:
+    Data = ChannelPtr->CtrlWrd08[ChipSel >> 1];
+    break;
+  case 9:
+    // RC9 = 0xD except when partial powerdown mode is enabled and mix SR/DR or SR/QR configurations,
+    // RC9 should be 0x9 for SR and and 0xD for DR or QR RDIMMs.
+    PowerDownMode = (UINT8) UserOptions.CfgPowerDownMode;
+    PowerDownMode = (!TechPtr->NBPtr->IsSupported[ChannelPDMode]) ? PowerDownMode : 0;
+    IDS_OPTION_HOOK (IDS_POWERDOWN_MODE, &PowerDownMode, &(TechPtr->NBPtr->MemPtr->StdHeader));
+    if ((PowerDownMode == 1) &&
+        (DCTPtr->Timings.DimmSRPresent & ((UINT16) 1 << (ChipSel >> 1))) &&
+        ((DCTPtr->Timings.DimmDrPresent != 0) || (DCTPtr->Timings.DimmQrPresent != 0))) {
+      Data = 0x09;
+    } else {
+      Data = 0x0D;
+    }
+    break;
+  case 11:
+    Data = CONVERT_VDDIO_TO_ENCODED (TechPtr->RefPtr->DDR3Voltage);
+    break;
+  default:;
+  }
+
+  return (Data & 0x0F);
+}
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends control word command
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]     CmdNum  -  control number.
+ *     @param[in]     Value  -  value to send
+ *
+ */
+
+VOID
+MemTSendCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 CmdNum,
+  IN       UINT8 Value
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // 1. Program MrsBank and MrsAddress.
+  //    n = [BA2, A2, A1, A0].
+  //    data = [BA1, BA0, A4, A3].
+  //    Set all other bits in MrsAddress to zero.
+  //
+  NBPtr->SetBitField (NBPtr, BFMrsBank, ((CmdNum & 8) >> 1) | (Value >> 2));
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, ((Value & 3) << 3) | (CmdNum & 7));
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tCS%d RC%02d %04x\n", (MemNGetBitFieldNb (NBPtr, BFMrsChipSel) & 7), CmdNum, Value);
+
+  // 2.Set SendCtrlWord=1
+  NBPtr->SetBitField (NBPtr, BFSendCtrlWord, 1);
+  // 3.Wait for BFSendCtrlWord=0
+  NBPtr->PollBitField (NBPtr, BFSendCtrlWord, 0, PCI_ACCESS_TIMEOUT, FALSE);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sends specific control words commands before frequency change for certain DRAM buffers.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+FreqChgCtrlWrd3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 ChipSel;
+  UINT16 Speed;
+  UINT16 CsPresent;
+
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  Speed = NBPtr->DCTPtr->Timings.Speed;
+  CsPresent = NBPtr->DCTPtr->Timings.CsPresent;
+
+
+  for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+    //
+    // If chip select present.
+    //
+    if ((CsPresent & ((UINT16)3 << ChipSel)) != 0) {
+
+      NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+      // program F2x[1, 0]A8[CtrlWordCS]=bit mask for target chip selects.
+      NBPtr->SetBitField (NBPtr, BFCtrlWordCS, 3 << (ChipSel & 0xFE));
+
+      //wait 8us for TMRD, must be changed to optimize to 8 MEM CLKs
+      MemUWait10ns (800, MemPtr);
+      if (Speed == DDR800_FREQUENCY) {
+        MemTSendCtlWord3 (TechPtr, 0x0A, 0);
+      } else if (Speed == DDR1066_FREQUENCY) {
+        MemTSendCtlWord3 (TechPtr, 0x0A, 1);
+      } else if (Speed == DDR1333_FREQUENCY) {
+        MemTSendCtlWord3 (TechPtr, 0x0A, 2);
+      } else if (Speed == DDR1600_FREQUENCY) {
+        MemTSendCtlWord3 (TechPtr, 0x0A, 3);
+      } else if (Speed == DDR1866_FREQUENCY) {
+        MemTSendCtlWord3 (TechPtr, 0x0A, 4);
+      } else {
+        ASSERT (FALSE);
+      }
+    }
+  }
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.h
new file mode 100644
index 0000000000..7b2db43f8f
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtrci3.h
@@ -0,0 +1,87 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtrci3.h
+ *
+ * Technology control word init for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTRCI3_H_
+#define _MTRCI3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+UINT8
+MemTGetCtlWord3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 CtrlWordNum,
+  IN       UINT8 RawCard,
+  IN       UINT8 ChipSel
+  );
+
+VOID
+MemTDramControlRegInit3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+#endif  /* _MTRCI3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.c
new file mode 100644
index 0000000000..a023705110
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.c
@@ -0,0 +1,503 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtsdi3.c
+ *
+ * Technology Software DRAM Init for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mtsdi3.h"
+#include "mtrci3.h"
+#include "merrhdl.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+#define FILECODE PROC_MEM_TECH_DDR3_MTSDI3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function initiates software DRAM init for  both DCTs
+ *   at the same time.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+BOOLEAN
+MemTDramInitSw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 ChipSel;
+
+  MEM_DATA_STRUCT *MemPtr;
+  DIE_STRUCT *MCTPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart Dram Init\n");
+  // 3.Program F2x[1,0]7C[EnDramInit]=1
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tEnDramInit = 1 for both DCTs\n");
+  NBPtr->BrdcstSet (NBPtr, BFEnDramInit, 1);
+  NBPtr->PollBitField (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, TRUE);
+
+  // 4.wait 200us
+  MemUWait10ns (20000, MemPtr);
+
+  // 5.Program F2x[1, 0]7C[DeassertMemRstX] = 1.
+  NBPtr->BrdcstSet (NBPtr, BFDeassertMemRstX, 1);
+
+  // 6.wait 500us
+  MemUWait10ns (50000, MemPtr);
+
+  // Do Phy Fence training before sending MRS commands
+  if (!NBPtr->IsSupported[FenceTrnBeforeDramInit]) {
+    AGESA_TESTPOINT (TpProcMemPhyFenceTraining, &(NBPtr->MemPtr->StdHeader));
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+        NBPtr->PhyFenceTraining (NBPtr);
+      }
+    }
+  }
+
+  // 7.NOP or deselect & take CKE high
+  NBPtr->BrdcstSet (NBPtr, BFAssertCke, 1);
+
+  // 8.wait 360ns
+  MemUWait10ns (36, MemPtr);
+
+  // The following steps are performed once for each channel with unbuffered DIMMs
+  // and once for each chip select on registered DIMMs:
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+      IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+
+      // Enable Dram Parity if appropriate.
+      NBPtr->FamilySpecificHook[EnableParityAfterMemRst] (NBPtr, NULL);
+
+      // The following steps are performed with registered DIMMs only and
+      // must be done for each chip select pair:
+      if (MCTPtr->Status[SbRegistered]) {
+        MemTDramControlRegInit3 (TechPtr);
+      }
+
+      // Initialize LRDIMM's register
+      TechPtr->TechnologySpecificHook[LrdimmControlRegInit] (TechPtr, NULL);
+
+      for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+        if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+          IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+          // if chip select present
+          if (!(TechPtr->TechnologySpecificHook[LrdimmSendAllMRCmds] (TechPtr, &ChipSel))) {
+            MemTSendAllMRCmds3 (TechPtr, ChipSel);
+          }
+          // NOTE: wait 512 clocks for DLL-relock
+          MemUWait10ns (50000, NBPtr->MemPtr);  // wait 500us
+          if (!(MCTPtr->Status[SbRegistered] || MCTPtr->Status[SbLrdimms])) {
+            break;
+          }
+        }
+      }
+
+      // 17.Send two ZQCL commands (to even then odd chip select)
+      NBPtr->sendZQCmd (NBPtr);
+      NBPtr->sendZQCmd (NBPtr);
+    }
+  }
+
+  // 18.Program F2x[1,0]7C[EnDramInit]=0
+  NBPtr->BrdcstSet (NBPtr, BFEnDramInit, 0);
+  NBPtr->PollBitField (NBPtr, BFDctAccessDone, 1, PCI_ACCESS_TIMEOUT, TRUE);
+  //
+  // For Unbuffered Dimms, Issue MRS for remaining CS without EnDramInit
+  //
+  NBPtr->FamilySpecificHook[SendMrsCmdsPerCs] (NBPtr, NBPtr);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "End Dram Init\n\n");
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the EMRS1 value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]        Wl - Indicates if WL mode should be enabled
+ *     @param[in]        TargetDIMM - DIMM target for WL
+ */
+
+VOID
+MemTEMRS13 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       BOOLEAN Wl,
+  IN       UINT8 TargetDIMM
+  )
+{
+  UINT16 MrsAddress;
+  UINT8 MaxDimmPerCH;
+  UINT8 ChipSel;
+  UINT8  Value8;
+
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MaxDimmPerCH = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                        NBPtr->MCTPtr->SocketId,
+                                        NBPtr->ChannelPtr->ChannelID);
+  ChipSel = (UINT8) (0x0FF & NBPtr->GetBitField (NBPtr, BFMrsChipSel));
+
+  // BA2=0,BA1=0,BA0=1
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 1);
+
+  MrsAddress = 0;
+
+  // program MrsAddress[5,1]=output driver impedance control (DIC):
+  // based on F2x[1,0]84[DrvImpCtrl]
+  if (!(NBPtr->IsSupported[CheckDrvImpCtrl])) {
+    Value8 = (UINT8)NBPtr->GetBitField (NBPtr, BFDrvImpCtrl);
+    if ((Value8 & ((UINT8) 1 << 1)) != 0) {
+      MrsAddress |= ((UINT16) 1 << 5);
+    }
+    if ((Value8 & ((UINT8) 1 << 0)) != 0) {
+      MrsAddress |= ((UINT16) 1 << 1);
+    }
+  } else {
+    MrsAddress |= ((UINT16) 1 << 1);
+  }
+  // program MrsAddress[9,6,2]=nominal termination resistance of ODT (RTT):
+  // Different CS may have different RTT.
+  //
+  Value8 = NBPtr->MemNGetDramTerm (NBPtr, ChipSel);
+
+  //
+  // If Write Leveling this DIMM
+  //
+  if (Wl) {
+    if ((ChipSel / NBPtr->CsPerDelay) == TargetDIMM) {
+      // Program MrsAddress[7] = 1 for Write leveling enable
+      MrsAddress |= ((UINT16) 1 << 7);
+      if (ChipSel & 1) {
+        // Output buffer disabled, MrsAddress[7] (Qoff = 1)
+        MrsAddress |= ((UINT16) 1 << 12);
+      }
+      //  Set Rtt_Nom = Rtt_Wr if there are 2 or more dimms
+      if ((NBPtr->ChannelPtr->DimmQrPresent != 0) || (NBPtr->ChannelPtr->Dimms >= 2)) {
+        Value8 = NBPtr->MemNGetDynDramTerm (NBPtr, ChipSel);
+      } else if (NBPtr->IsSupported[WlRttNomFor1of3Cfg] && (MaxDimmPerCH == 3)) {
+        // For some family, set Rtt_Nom = Rtt_Wr in one of three DIMMs per channel configurations
+        Value8 = NBPtr->MemNGetDynDramTerm (NBPtr, ChipSel);
+      }
+    }
+    NBPtr->FamilySpecificHook[WLMR1] (NBPtr, &MrsAddress);
+  }
+  //
+  // Turn off Rtt_Nom (DramTerm=0) for certain CS in certain configs.
+  //
+  // All odd CS for 4 Dimm Systems
+  if (MaxDimmPerCH == 4) {
+    if (ChipSel & 0x01) {
+      Value8 = 0;
+    }
+  // CS 1 and 5 for 3 Dimm configs
+  } else if (MaxDimmPerCH == 3) {
+    if ((ChipSel == 1) || (ChipSel == 5)) {
+      Value8 = 0;
+    }
+  }
+  // All odd CS of any QR Dimms
+  if ((NBPtr->ChannelPtr->DimmQrPresent & ((UINT8) (1 << (ChipSel >> 1)))) != 0) {
+    if (ChipSel & 0x01) {
+      Value8 = 0;
+    }
+  }
+  if ((Value8 & ((UINT8) 1 << 2)) != 0) {
+    MrsAddress |= ((UINT16) 1 << 9);
+  }
+  if ((Value8 & ((UINT8) 1 << 1)) != 0) {
+    MrsAddress |= ((UINT16) 1 << 6);
+  }
+  if ((Value8 & ((UINT8) 1 << 0)) != 0) {
+    MrsAddress |= ((UINT16) 1 << 2);
+  }
+
+  // program MrsAddress[12]=output disable (QOFF):
+  // based on F2x[1,0]84[Qoff]
+
+  if (!NBPtr->IsSupported[CheckQoff]) {
+    if (NBPtr->GetBitField (NBPtr, BFQoff) != 0) {
+      MrsAddress |= ((UINT16) 1 << 12);
+    }
+  }
+
+  // program MrsAddress[11]=TDQS:
+  // based on F2x[1,0]94[RDqsEn]
+
+  if ((NBPtr->DCTPtr->Timings.Dimmx4Present != 0) && (NBPtr->DCTPtr->Timings.Dimmx8Present != 0)) {
+    if (!(NBPtr->IsSupported[SetTDqsForx8DimmOnly]) || ((NBPtr->DCTPtr->Timings.Dimmx8Present & ((UINT8) 1 << (ChipSel >> 1))) != 0)) {
+      MrsAddress |= ((UINT16) 1 << 11);
+    }
+  }
+
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the EMRS2 value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTEMRS23 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT32 MrsAddress;
+  UINT8 DramTermDyn;
+  UINT8 MaxDimmPerCH;
+  UINT8 ChipSel;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  MaxDimmPerCH = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration, NBPtr->MCTPtr->SocketId, NBPtr->ChannelPtr->ChannelID );
+  ChipSel = (UINT8) (0x0FF & NBPtr->GetBitField (NBPtr, BFMrsChipSel));
+
+  // BA2=0,BA1=1,BA0=0
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 2);
+
+  // program MrsAddress[5:3]=CAS write latency (CWL):
+  MrsAddress = NBPtr->MemNGetMR2CWL (NBPtr);
+
+  // program MrsAddress[6]=auto self refresh method (ASR):
+  // program MrsAddress[7]=self refresh temperature range (SRT):
+  MrsAddress |= 1 << 6;
+  MrsAddress &= ( ~ (1 << 7));
+
+  // program MrsAddress[10:9]=dynamic termination during writes (RTT_WR):
+  DramTermDyn = NBPtr->MemNGetDynDramTerm (NBPtr, ChipSel);
+  // Special Case for 1 DR Unbuffered Dimm in 3 Dimm/Ch
+  if (!(NBPtr->MCTPtr->Status[SbRegistered])) {
+    if (MaxDimmPerCH == 3) {
+      if (NBPtr->ChannelPtr->Dimms == 1) {
+        if ((NBPtr->ChannelPtr->DimmDrPresent & ((UINT8) (1 << (ChipSel >> 1)))) != 0) {
+          DramTermDyn = 1;
+        }
+      }
+    }
+  }
+  MrsAddress |= (UINT16) DramTermDyn << 9;
+
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function calculates the EMRS3 value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTEMRS33 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // BA2=0,BA1=1,BA0=1
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 3);
+
+  // program MrsAddress[1:0]=multi purpose register address location
+  // (MPR Location):based on F2x[1,0]84[MprLoc]
+  // program MrsAddress[2]=multi purpose register
+  // (MPR):based on F2x[1,0]84[MprEn]
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, (NBPtr->GetBitField (NBPtr, BFDramMRSReg) >> 24) & 0x0007);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This sets MRS value
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ */
+
+VOID
+MemTMRS3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT32 MrsAddress;
+  MEM_NB_BLOCK  *NBPtr;
+  UINT32 Ppd;
+
+  NBPtr = TechPtr->NBPtr;
+
+  // BA2=0,BA1=0,BA0=0
+  NBPtr->SetBitField (NBPtr, BFMrsBank, 0);
+
+  // program MrsAddress[1:0]=burst length and control method
+  // (BL):based on F2x[1,0]84[BurstCtrl]
+  MrsAddress = NBPtr->GetBitField (NBPtr, BFBurstCtrl);
+
+  // program MrsAddress[3]=1 (BT):interleaved
+  MrsAddress |= (UINT16) 1 << 3;
+
+  // program MrsAddress[6:4,2]=read CAS latency
+  MrsAddress |= NBPtr->MemNGetMR0CL (NBPtr);
+
+  // program MrsAddress[11:9]=write recovery for auto-precharge
+  MrsAddress |= NBPtr->MemNGetMR0WR (NBPtr);
+
+  // program MrsAddress[12] (PPD):based on F2x[1,0]84[PChgPDModeSel]
+  Ppd = NBPtr->GetBitField (NBPtr, BFPchgPDModeSel);
+  NBPtr->FamilySpecificHook[MR0_PPD] (NBPtr, &Ppd);
+  IDS_OPTION_HOOK (IDS_MEM_MR0, &Ppd, &TechPtr->NBPtr->MemPtr->StdHeader);
+  MrsAddress |= Ppd << 12;
+
+  // program MrsAddress[8]=1 (DLL):DLL reset
+  MrsAddress |= (UINT32) 1 << 8;
+
+  // During memory initialization, the value sent to MR0 is saved for S3 resume
+  NBPtr->MemNSaveMR0 (NBPtr, MrsAddress);
+
+  NBPtr->SetBitField (NBPtr, BFMrsAddress, MrsAddress);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This send all MR commands to a rank in sequence 2-3-1-0
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in]       ChipSel    - Target Chip Select
+ */
+
+VOID
+MemTSendAllMRCmds3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 ChipSel
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+
+  NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+
+  // 13.Send EMRS(2)
+  MemTEMRS23 (TechPtr);
+  AGESA_TESTPOINT (TpProcMemSendMRS2, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->SendMrsCmd (NBPtr);
+
+  // 14.Send EMRS(3). Ordinarily at this time, MrsAddress[2:0]=000b
+  MemTEMRS33 (TechPtr);
+  AGESA_TESTPOINT (TpProcMemSendMRS3, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->SendMrsCmd (NBPtr);
+
+  // 15.Send EMRS(1).
+  MemTEMRS13 (TechPtr, FALSE, (ChipSel >> 1));
+  AGESA_TESTPOINT (TpProcMemSendMRS1, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->SendMrsCmd (NBPtr);
+
+  // 16.Send MRS with MrsAddress[8]=1(reset the DLL)
+  MemTMRS3 (TechPtr);
+  AGESA_TESTPOINT (TpProcMemSendMRS0, &(NBPtr->MemPtr->StdHeader));
+  NBPtr->SendMrsCmd (NBPtr);
+}
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.h
new file mode 100644
index 0000000000..69461e3957
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtsdi3.h
@@ -0,0 +1,96 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtsdi3.h
+ *
+ * Technology software DRAM init for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTSDI3_H_
+#define _MTSDI3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+VOID
+MemTEMRS33 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTMRS3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+VOID
+MemTEMRS13 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       BOOLEAN Wl,
+  IN       UINT8 TargetDIMM
+  );
+
+VOID
+MemTEMRS23 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+#endif  /* _MTSDI3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.c
new file mode 100644
index 0000000000..5e20a3fde7
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.c
@@ -0,0 +1,1202 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtspd3.c
+ *
+ * Technology SPD supporting functions for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 85961 $ @e \$Date: 2013-01-14 19:58:20 -0600 (Mon, 14 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "AdvancedApi.h"
+#include "Ids.h"
+#include "mport.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "mt3.h"
+#include "mu.h"
+#include "mtspd3.h"
+#include "mftds.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTSPD3_FILECODE
+
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+BOOLEAN
+STATIC
+MemTCRCCheck3 (
+  IN OUT   UINT8 *SPDPtr
+  );
+
+UINT8
+STATIC
+MemTSPDGetTCL3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  );
+
+BOOLEAN
+STATIC
+MemTCheckBankAddr3 (
+  IN       UINT8 Encode,
+     OUT   UINT8 *Index
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+extern BUILD_OPT_CFG UserOptions;
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the DRAM mode
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE - indicates that the DRAM mode is set to DDR3
+ */
+
+BOOLEAN
+MemTSetDramMode3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFLegacyBiosMode, 0);
+  TechPtr->NBPtr->SetBitField (TechPtr->NBPtr, BFDdr3Mode, 1);
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function determines if DIMMs are present. It checks checksum and interrogates the SPDs
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE  - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTDIMMPresence3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 Channel;
+  UINT8 i;
+  MEM_PARAMETER_STRUCT *RefPtr;
+  UINT8 *SpdBufferPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  MEM_NB_BLOCK *NBPtr;
+  BOOLEAN SPDCtrl;
+  UINT8 Devwidth;
+  UINT8 MaxDimms;
+  UINT8 NumDimmslots;
+  UINT8 Value8;
+  UINT16  DimmMask;
+  UINT32 DimmValidMask;
+
+  NBPtr = TechPtr->NBPtr;
+  RefPtr = NBPtr->RefPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  SPDCtrl = UserOptions.CfgIgnoreSpdChecksum;
+  DimmValidMask = 0;
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+    for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+      NBPtr->SwitchChannel (NBPtr, Channel);
+      ChannelPtr = NBPtr->ChannelPtr;
+      ChannelPtr->DimmQrPresent = 0;
+      //
+      // Get the maximum number of DIMMs
+      //
+      MaxDimms = MAX_DIMMS_PER_CHANNEL;
+      NumDimmslots = GetMaxDimmsPerChannel (NBPtr->RefPtr->PlatformMemoryConfiguration,
+                                            MCTPtr->SocketId,
+                                            ChannelPtr->ChannelID);
+      DimmValidMask |= (NumDimmslots == 3) ? 0x7 : 0x3;
+
+      for (i = 0; i < MaxDimms; i++) {
+        //  Bitmask representing dimm #i.
+        DimmMask = (UINT16)1 << i;
+        //
+        if (MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, i)) {
+          MCTPtr->DimmPresent |= DimmMask;
+          //
+          //  Check for valid checksum value
+          //
+          AGESA_TESTPOINT (TpProcMemSPDChecking, &(NBPtr->MemPtr->StdHeader));
+          if (SpdBufferPtr[SPD_TYPE] == JED_DDR3SDRAM) {
+            ChannelPtr->ChDimmValid |= DimmMask;
+            MCTPtr->DimmValid |= DimmMask;
+          } else if (NBPtr->IsSupported[G5DimmInD3Socket]) {
+            // If a non-DDR3 DIMM is installed, mark all DIMMs of that channel as not present
+            MCTPtr->DimmPresent &= ~((UINT32) 0xFF << Dct);
+            MCTPtr->DimmValid &= ~((UINT32) 0xFF << Dct);
+            ChannelPtr->ChDimmValid = 0;
+            DCTPtr->Timings.DctDimmValid = 0;
+            MCTPtr->ErrStatus[EsbDimmMismatchM] = TRUE;
+            PutEventLog (AGESA_ERROR, MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+            SetMemError (AGESA_ERROR, MCTPtr);
+            continue;
+          } else {
+            // Current socket is set up to only support DDR3 dimms.
+            IDS_ERROR_TRAP;
+          }
+          if (!MemTCRCCheck3 (SpdBufferPtr) && !SPDCtrl && !NBPtr->IsSupported[AMPIsEnabled]) {
+            //
+            // NV_SPDCHK_RESTRT is set to 0,
+            // cannot ignore faulty SPD checksum
+            //
+            //  Indicate checksum error
+            ChannelPtr->DimmSpdCse |= DimmMask;
+            PutEventLog (AGESA_ERROR, MEM_ERROR_CHECKSUM_NV_SPDCHK_RESTRT_ERROR, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+            SetMemError (AGESA_ERROR, MCTPtr);
+          }
+          //
+          //  Check module type information.
+          //
+          if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_LRDIMM) {
+            //
+            // LRDIMMS
+            //
+            if (i < NumDimmslots) {
+              ChannelPtr->LrDimmPresent |= DimmMask;
+              MCTPtr->LrDimmPresent |= DimmMask;
+
+              if (!UserOptions.CfgMemoryLRDimmCapable) {
+                PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_LRDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+                IDS_ERROR_TRAP;
+              }
+              TechPtr->TechnologySpecificHook[LrdimmPresence] (TechPtr, &i);
+            }
+          }
+          if (SpdBufferPtr[SPD_DIMM_TYPE] == JED_RDIMM || SpdBufferPtr[SPD_DIMM_TYPE] == JED_MINIRDIMM) {
+            //
+            // RDIMMS
+            //
+            ChannelPtr->RegDimmPresent |= DimmMask;
+            MCTPtr->RegDimmPresent |= DimmMask;
+            if (!UserOptions.CfgMemoryRDimmCapable) {
+              PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_RDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+              IDS_ERROR_TRAP;
+            }
+          }
+          if ((SpdBufferPtr[SPD_DIMM_TYPE] == JED_UDIMM) && !UserOptions.CfgMemoryUDimmCapable) {
+            PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_UDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+            IDS_ERROR_TRAP;
+          }
+          if ((SpdBufferPtr[SPD_DIMM_TYPE] == JED_SODIMM) || (SpdBufferPtr[SPD_DIMM_TYPE] == JED_72B_SOUDIMM)) {
+            ChannelPtr->SODimmPresent |= DimmMask;
+            if (!UserOptions.CfgMemorySODimmCapable) {
+              PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_SODIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+              IDS_ERROR_TRAP;
+            }
+          }
+          //
+          //  Check error correction type
+          //
+          if ((SpdBufferPtr[SPD_ECCBITS] & JED_ECC) != 0) {
+            MCTPtr->DimmEccPresent |= DimmMask;  //  Dimm has ECC
+          }
+          //
+          //  Get the Dimm width data
+          //
+          Devwidth = SpdBufferPtr[SPD_DEV_WIDTH] & 0x7;
+          switch (Devwidth) {
+          case 0:
+            ChannelPtr->Dimmx4Present |= DimmMask;
+            if ((ChannelPtr->LrDimmPresent & DimmMask) == 0) {
+              //
+              // DimmNibbleAccess indicates that a DIMM will use nibble signaling and use nibble training.
+              // LRDIMMs will not use Nibble based signaling even if x4 parts are present.
+              //
+              if (i < NumDimmslots) {
+                ChannelPtr->DimmNibbleAccess |= DimmMask;
+              }
+            }
+            Devwidth = 4;
+            break;
+          case 1:
+            ChannelPtr->Dimmx8Present |= DimmMask;
+            Devwidth = 8;
+            break;
+          case 2:
+            ChannelPtr->Dimmx16Present |= DimmMask;
+            Devwidth = 16;
+            break;
+          default:
+            IDS_ERROR_TRAP;
+          }
+          //
+          //  Check for 'analysis probe installed'
+          // if (SpdBufferPtr[SPD_ATTRIB] & JED_PROBE_MSK)
+          //
+          //  Determine the geometry of the DIMM module
+          // if (SpdBufferPtr[SPD_DM_BANKS] & SP_DPL_BIT)
+          //
+          //  specify the number of ranks
+          //
+          Value8 = ((SpdBufferPtr[SPD_RANKS] >> 3) & 0x07) + 1;
+          if (Value8 == 5) {
+            // Octal Rank
+            Value8 = 8;
+          }
+          //
+          // For LRDIMMS we will assume that if there are at least 4 Physical ranks, then it Could be used
+          // as a QR RDIMM with a rank Mux of x1 and therefore all four CS will be used. So an 8R LRDIMM will
+          // be marked as a QR even if Rank multiplication allows it to use only 2 logical ranks.
+          //
+          if ((ChannelPtr->LrDimmPresent & DimmMask) != 0) {
+            //
+            // LRDIMM Physical Ranks
+            //
+            ChannelPtr->LrdimmPhysicalRanks[i] = Value8;
+          }
+          if (Value8 > 2) {
+            if (!UserOptions.CfgMemoryQuadRankCapable) {
+              PutEventLog (AGESA_WARNING, MEM_WARNING_UNSUPPORTED_QRDIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+            }
+            //
+            // Mark this Dimm as Quad Rank
+            //
+            ChannelPtr->DimmQrPresent |= DimmMask;
+            Value8 = 2;
+          } else if (Value8 == 2) {
+            ChannelPtr->DimmDrPresent |= DimmMask;   //  Dual rank dimms
+          } else {
+            ChannelPtr->DimmSRPresent |= DimmMask;   //  Single rank dimms
+          }
+          //
+          //  Calculate bus loading per Channel
+          if (Devwidth == 16) {
+            Devwidth = 4;
+          } else if (Devwidth == 4) {
+            Devwidth = 16;
+          }
+          //
+          //  Double Addr bus load value for dual rank DIMMs (Unless LRDIMM)
+          //
+          if (((ChannelPtr->LrDimmPresent & DimmMask) == 0) && (Value8 == 2) ) {
+            Devwidth = Devwidth << 1;
+          }
+          //
+          ChannelPtr->Ranks = ChannelPtr->Ranks + Value8;
+          ChannelPtr->Loads = ChannelPtr->Loads + Devwidth;
+          if ((i < NumDimmslots) || ((ChannelPtr->DimmQrPresent & DimmMask) == 0)) {
+            ChannelPtr->Dimms++;
+          }
+          //
+          // Check address mirror support for Unbuffered Dimms or LRDimms
+          //
+          if ((ChannelPtr->RegDimmPresent & DimmMask) == 0) {
+            if ((SpdBufferPtr[SPD_ADDRMAP] & 1) != 0) {
+              ChannelPtr->DimmMirrorPresent |= DimmMask;
+            }
+          }
+          //
+          // Get byte62: Reference Raw Card information
+          //
+          ChannelPtr->RefRawCard[i] = SpdBufferPtr[SPD_RAWCARD] & 0x1F;
+          //
+          // Get control word values for RC3, RC4 and RC5
+          //
+          ChannelPtr->CtrlWrd03[i] = SpdBufferPtr[SPD_CTLWRD03] >> 4;
+          ChannelPtr->CtrlWrd04[i] = SpdBufferPtr[SPD_CTLWRD04] & 0x0F;
+          ChannelPtr->CtrlWrd05[i] = SpdBufferPtr[SPD_CTLWRD05] >> 4;
+          //
+          // Temporarily store info. of SPD byte 63 into CtrlWrd02(s),
+          // and they will be used late to calculate real RC2 and RC8 value
+          //
+          ChannelPtr->CtrlWrd02[i] = SpdBufferPtr[SPD_ADDRMAP] & 0x03;
+          //
+          // Copy the number of registers to the Ps Block to persist across frequency changes
+          //
+          NBPtr->PsPtr->NumOfReg[i] = SpdBufferPtr[SPD_ADDRMAP] & 0x03;
+          //
+          // Workaround for early revisions of DIMMs which SPD byte 63 is 0
+          //
+          if (NBPtr->PsPtr->NumOfReg[i] == JED_UNDEFINED) {
+            NBPtr->PsPtr->NumOfReg[i] = 1;
+          }
+        } // if DIMM present
+      } // Dimm loop
+
+      if (Channel == 0) {
+        DCTPtr->Timings.DctDimmValid = ChannelPtr->ChDimmValid;
+        DCTPtr->Timings.DimmMirrorPresent = ChannelPtr->DimmMirrorPresent;
+        DCTPtr->Timings.DimmSpdCse = ChannelPtr->DimmSpdCse;
+        DCTPtr->Timings.DimmQrPresent = ChannelPtr->DimmQrPresent;
+        DCTPtr->Timings.DimmDrPresent = ChannelPtr->DimmDrPresent;
+        DCTPtr->Timings.DimmSRPresent = ChannelPtr->DimmSRPresent;
+        DCTPtr->Timings.Dimmx4Present = ChannelPtr->Dimmx4Present;
+        DCTPtr->Timings.Dimmx8Present = ChannelPtr->Dimmx8Present;
+        DCTPtr->Timings.Dimmx16Present = ChannelPtr->Dimmx16Present;
+      }
+      if ((Channel != 1) || (Dct != 1)) {
+        MCTPtr->DimmPresent <<= 8;
+        MCTPtr->DimmValid <<= 8;
+        MCTPtr->RegDimmPresent <<= 8;
+        MCTPtr->LrDimmPresent <<= 8;
+        MCTPtr->DimmEccPresent <<= 8;
+        MCTPtr->DimmParPresent <<= 8;
+        DimmValidMask <<= 8;
+      }
+    } // Channel loop
+  } // DCT loop
+
+  //  If we have DIMMs, some further general characteristics checking
+  if (MCTPtr->DimmValid != 0) {
+    //  If there are registered dimms, all the dimms must be registered
+    if (MCTPtr->RegDimmPresent == MCTPtr->DimmValid) {
+      //  All dimms registered
+      MCTPtr->Status[SbRegistered] = TRUE;
+      MCTPtr->Status[SbParDimms] = TRUE;  //  All DDR3 RDIMMs are parity capable
+      TechPtr->SetDqsEccTmgs = MemTSetDQSEccTmgsRDdr3; // Change the function pointer for DQS ECC timing
+    } else if (MCTPtr->RegDimmPresent != 0) {
+      //  We have an illegal DIMM mismatch
+      PutEventLog (AGESA_FATAL, MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_FATAL, MCTPtr);
+    }
+    //  If there are LrDimms, all the dimms must be LrDimms
+    if (MCTPtr->LrDimmPresent == (MCTPtr->DimmValid & DimmValidMask)) {
+      //  All dimms LRDIMMs
+      MCTPtr->Status[SbLrdimms] = TRUE;
+      MCTPtr->Status[SbParDimms] = TRUE;  //  All DDR3 RDIMMs are parity capable
+    } else if (MCTPtr->LrDimmPresent != 0) {
+      //  We have an illegal DIMM mismatch
+      PutEventLog (AGESA_FATAL, MEM_ERROR_MODULE_TYPE_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_FATAL, MCTPtr);
+    }
+
+    //  check the ECC capability of the DIMMs
+    if (MCTPtr->DimmEccPresent == MCTPtr->DimmValid) {
+      MCTPtr->Status[SbEccDimms] = TRUE;  //  All dimms ECC capable
+    }
+  } else {
+  }
+
+  NBPtr->SwitchDCT (NBPtr, 0);
+  NBPtr->SwitchChannel (NBPtr, 0);
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function finds the maximum frequency that each channel is capable to run at.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE  - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDGetTargetSpeed3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 *SpdBufferPtr;
+  UINT8 Dimm;
+  UINT8 Dct;
+  UINT8 Channel;
+  INT32 MTB_ps;
+  INT32 FTB_ps;
+  INT32 TCKmin_ps;
+  INT32 Value32;
+  MEM_NB_BLOCK *NBPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    DCTPtr = NBPtr->DCTPtr;
+    TCKmin_ps = 0;
+    for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+      NBPtr->SwitchChannel (NBPtr, Channel);
+      ChannelPtr = NBPtr->ChannelPtr;
+      for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+        if ((ChannelPtr->ChDimmValid & ((UINT8)1 << Dimm)) != 0) {
+          MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm);
+
+          // Determine tCKmin(all) which is the largest tCKmin
+          // value for all modules on the memory Channel (SPD byte 12).
+          //
+          MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR];
+          FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF);
+          Value32 = (MTB_ps * SpdBufferPtr[SPD_TCK]) + (FTB_ps * (INT8) SpdBufferPtr[SPD_TCK_FTB]) ;
+          if (TCKmin_ps < Value32) {
+            TCKmin_ps = Value32;
+          }
+        }
+      }
+    }
+    if (TCKmin_ps <= 938) {
+      DCTPtr->Timings.TargetSpeed = DDR2133_FREQUENCY;
+    } else if (TCKmin_ps <= 1071) {
+      DCTPtr->Timings.TargetSpeed = DDR1866_FREQUENCY;
+    } else if (TCKmin_ps <= 1250) {
+      DCTPtr->Timings.TargetSpeed = DDR1600_FREQUENCY;
+    } else if (TCKmin_ps <= 1500) {
+      DCTPtr->Timings.TargetSpeed = DDR1333_FREQUENCY;
+    } else if (TCKmin_ps <= 1875) {
+      DCTPtr->Timings.TargetSpeed = DDR1066_FREQUENCY;
+    } else if (TCKmin_ps <= 2500) {
+      DCTPtr->Timings.TargetSpeed = DDR800_FREQUENCY;
+    } else {
+      DCTPtr->Timings.TargetSpeed = DDR667_FREQUENCY;
+    }
+  }
+
+  // Ensure the target speed can be applied to all channels of the current node
+  NBPtr->SyncTargetSpeed (NBPtr);
+
+  // Set the start-up frequency
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    NBPtr->DCTPtr->Timings.Speed = TechPtr->NBPtr->StartupSpeed;
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function check the symmetry of DIMM pairs (DIMM on Channel A matching with
+ *   DIMM on Channel B), the overall DIMM population, and determine the width mode:
+ *   64-bit, 64-bit muxed, 128-bit.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE  - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDCalcWidth3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 *SpdBufferAPtr;
+  UINT8 *SpdBufferBPtr;
+  MEM_NB_BLOCK *NBPtr;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  UINT8 i;
+  UINT16 DimmMask;
+  UINT8 UngangMode;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  UngangMode = UserOptions.CfgMemoryModeUnganged;
+  // Does not support ganged mode for DDR3 dimms
+  ASSERT (UngangMode);
+  IDS_OPTION_HOOK (IDS_GANGING_MODE, &UngangMode, &(NBPtr->MemPtr->StdHeader));
+
+  //  Check symmetry of channel A and channel B dimms for 128-bit mode
+  //  capability.
+  //
+  AGESA_TESTPOINT (TpProcMemModeChecking, &(NBPtr->MemPtr->StdHeader));
+  i = 0;
+  if (!UngangMode) {
+    if (MCTPtr->DctData[0].Timings.DctDimmValid == MCTPtr->DctData[1].Timings.DctDimmValid) {
+      for (; i < MAX_DIMMS_PER_CHANNEL; i++) {
+        DimmMask = (UINT16)1 << i;
+        if ((DCTPtr->Timings.DctDimmValid & DimmMask) != 0) {
+          NBPtr->SwitchDCT (NBPtr, 0);
+          MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferAPtr, i);
+          NBPtr->SwitchDCT (NBPtr, 1);
+          MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferBPtr, i);
+          // compare rows and columns
+          if ((SpdBufferAPtr[SPD_ROW_SZ]&0x3F) != (SpdBufferBPtr[SPD_ROW_SZ]&0x3F)) {
+            break;
+          }
+          if ((SpdBufferAPtr[SPD_DENSITY]&0x0F) != (SpdBufferBPtr[SPD_DENSITY]&0x0F)) {
+            break;
+          }
+          // compare ranks and devwidth
+          if ((SpdBufferAPtr[SPD_DEV_WIDTH]&0x7F) != (SpdBufferBPtr[SPD_DEV_WIDTH]&0x7F)) {
+            break;
+          }
+        }
+      }
+    }
+    if (i < MAX_DIMMS_PER_CHANNEL) {
+      PutEventLog (AGESA_ALERT, MEM_ALERT_ORG_MISMATCH_DIMM, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+      SetMemError (AGESA_ALERT, MCTPtr);
+    } else {
+      NBPtr->Ganged = TRUE;
+      MCTPtr->GangedMode = TRUE;
+      MCTPtr->Status[Sb128bitmode] = TRUE;
+      NBPtr->SetBitField (NBPtr, BFDctGangEn, 1);
+    }
+  }
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       Initialize DCT Timing registers as per DIMM SPD.
+ *       For primary timing (T, CL) use best case T value.
+ *       For secondary timing params., use most aggressive settings
+ *           of slowest DIMM.
+ *
+ *   Note:
+ *   There are three components to determining "maximum frequency": SPD component,
+ *   Bus load component, and "Preset" max frequency component.
+ *   The SPD component is a function of the min cycle time specified by each DIMM,
+ *   and the interaction of cycle times from all DIMMs in conjunction with CAS
+ *   latency.  The SPD component only applies when user timing mode is 'Auto'.
+ *
+ *   The Bus load component is a limiting factor determined by electrical
+ *   characteristics on the bus as a result of varying number of device loads.  The
+ *   Bus load component is specific to each platform but may also be a function of
+ *   other factors.  The bus load component only applies when user timing mode is
+ * ' Auto'.
+ *
+ *   The Preset component is subdivided into three items and is the minimum of
+ *   the set: Silicon revision, user limit setting when user timing mode is 'Auto' and
+ *   memclock mode is 'Limit', OEM build specification of the maximum frequency.
+ *   The Preset component only applies when user timing mode is 'Auto'.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE  - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTAutoCycTiming3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  CONST UINT8 SpdIndexes[] = {
+    SPD_TRCD,
+    SPD_TRP,
+    SPD_TRTP,
+    SPD_TRAS,
+    SPD_TRC,
+    SPD_TWR,
+    SPD_TRRD,
+    SPD_TWTR,
+    SPD_TFAW
+  };
+
+  CONST UINT8 SpdFTBIndexes[] = {
+    SPD_TRCD_FTB,
+    SPD_TRP_FTB,
+    0,
+    0,
+    SPD_TRC_FTB,
+    0,
+    0,
+    0,
+    0
+  };
+
+  UINT8  *SpdBufferPtr;
+  INT32  MiniMaxTmg[GET_SIZE_OF (SpdIndexes)];
+  UINT8  MiniMaxTrfc[4];
+
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_NB_BLOCK *NBPtr;
+  UINT16 DimmMask;
+  INT32 Value32;
+  INT32 MTB_ps;
+  INT32 FTB_ps;
+  INT32 TCK_ps;
+  UINT8 i;
+  UINT8 j;
+  UINT8 Value8;
+  UINT8  *StatTmgPtr;
+  UINT16 *StatDimmTmgPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  // initialize mini-max arrays
+  for (j = 0; j < GET_SIZE_OF (MiniMaxTmg); j++) {
+    MiniMaxTmg[j] = 0;
+  }
+  for (j = 0; j < GET_SIZE_OF (MiniMaxTrfc); j++) {
+    MiniMaxTrfc[j] = 0;
+  }
+
+  // ======================================================================
+  //  Get primary timing (CAS Latency and Cycle Time)
+  // ======================================================================
+  //  Get OEM specific load variant max
+  //
+
+  //======================================================================
+  // Gather all DIMM mini-max values for cycle timing data
+  //======================================================================
+  //
+  DimmMask = 1;
+  for (i = 0; i < (MAX_CS_PER_CHANNEL / 2); i++) {
+    if ((DCTPtr->Timings.DctDimmValid & DimmMask) != 0) {
+      MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, i);
+      MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR];
+      FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF);
+
+      for (j = 0; j < GET_SIZE_OF (SpdIndexes); j++) {
+        Value32 = (UINT16)SpdBufferPtr[SpdIndexes[j]];
+        if (SpdIndexes[j] == SPD_TRC) {
+          Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TRC] & 0xF0) << 4;
+        } else if (SpdIndexes[j] == SPD_TRAS) {
+          Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TRAS] & 0x0F) << 8;
+        } else if (SpdIndexes[j] == SPD_TFAW) {
+          Value32 |= ((UINT16)SpdBufferPtr[SPD_UPPER_TFAW] & 0x0F) << 8;
+        }
+
+        Value32 *= MTB_ps;
+        if (SpdFTBIndexes[j] != 0) {
+          Value32 += (FTB_ps * (INT8) SpdBufferPtr[SpdFTBIndexes[j]]) ;
+        }
+        if (MiniMaxTmg[j] < Value32) {
+          MiniMaxTmg[j] = Value32;
+        }
+      }
+
+      //  get Trfc0 - Trfc3 values
+      Value8 = SpdBufferPtr[SPD_DENSITY] & 0x0F;
+      if (MiniMaxTrfc[i] < Value8) {
+        MiniMaxTrfc[i] = Value8;
+      }
+    }
+    DimmMask <<= 1;
+  }
+
+  // ======================================================================
+  //  Convert  DRAM CycleTiming values and store into DCT structure
+  // ======================================================================
+  //
+  TCK_ps = 1000500 / DCTPtr->Timings.Speed;
+
+  StatDimmTmgPtr = &DCTPtr->Timings.DIMMTrcd;
+  StatTmgPtr = &DCTPtr->Timings.Trcd;
+  for (j = 0; j < GET_SIZE_OF (SpdIndexes); j++) {
+    Value32 = MiniMaxTmg[j];
+
+    MiniMaxTmg[j] = (MiniMaxTmg[j] + TCK_ps - 1) / TCK_ps;
+
+    StatDimmTmgPtr[j] = (UINT16) (Value32 / (1000 / 40));
+    StatTmgPtr[j] = (UINT8) MiniMaxTmg[j];
+  }
+  DCTPtr->Timings.Trfc0 = MiniMaxTrfc[0];
+  DCTPtr->Timings.Trfc1 = MiniMaxTrfc[1];
+  DCTPtr->Timings.Trfc2 = MiniMaxTrfc[2];
+  DCTPtr->Timings.Trfc3 = MiniMaxTrfc[3];
+
+  DCTPtr->Timings.CasL = MemTSPDGetTCL3 (TechPtr);
+
+  //======================================================================
+  // Program DRAM Timing values
+  //======================================================================
+  //
+  NBPtr->ProgramCycTimings (NBPtr);
+
+  MemFInitTableDrive (NBPtr, MTAfterAutoCycTiming);
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the bank addressing, program Mask values and build a chip-select population map.
+ *   This routine programs PCI 0:24N:2x80 config register.
+ *   This routine programs PCI 0:24N:2x60,64,68,6C config registers (CS Mask 0-3)
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  TRUE  - indicates that a FATAL error has not occurred
+ *     @return  FALSE - indicates that a FATAL error has occurred
+ */
+
+BOOLEAN
+MemTSPDSetBanks3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 *SpdBufferPtr;
+  UINT8 i;
+  UINT8 ChipSel;
+  UINT8 DimmID;
+  UINT8 Value8;
+  UINT8 Rows;
+  UINT8 Cols;
+  UINT8 Ranks;
+  UINT8 Banks;
+  UINT32 BankAddrReg;
+  UINT32 CsMask;
+  UINT16 CSSpdCSE;
+  UINT16 CSExclude;
+  UINT16 DimmQRDR;
+  DIE_STRUCT *MCTPtr;
+  DCT_STRUCT *DCTPtr;
+  MEM_NB_BLOCK *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  DCTPtr = NBPtr->DCTPtr;
+  BankAddrReg = 0;
+  CSSpdCSE = 0;
+  CSExclude = 0;
+
+  for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel += 2) {
+    DimmID = ChipSel >> 1;
+
+    DimmQRDR = (DCTPtr->Timings.DimmQrPresent) | (DCTPtr->Timings.DimmDrPresent);
+    if ((DCTPtr->Timings.DimmSpdCse & ((UINT16) 1 << DimmID)) != 0) {
+      CSSpdCSE |= (UINT16) ((DimmQRDR & (UINT16) 1 << DimmID) ? 3 : 1) << ChipSel;
+    }
+    if ((DCTPtr->Timings.DimmExclude & ((UINT16) 1 << DimmID)) != 0) {
+      CSExclude |= (UINT16) ((DimmQRDR & (UINT16) 1 << DimmID) ? 3: 1) << ChipSel;
+    }
+
+    if ((DCTPtr->Timings.DctDimmValid & ((UINT16)1 << DimmID)) != 0) {
+      MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, DimmID);
+
+      //  Get the basic data
+      Rows = (SpdBufferPtr[SPD_ROW_SZ] >> 3) & 0x7;
+      Cols = SpdBufferPtr[SPD_COL_SZ] & 0x7;
+      Banks = (SpdBufferPtr[SPD_L_BANKS] >> 4) & 0x7;
+      Ranks = ((SpdBufferPtr[SPD_RANKS] >> 3) & 0x07) + 1;
+      if (Ranks == 5) {
+        Ranks = 8;
+      }
+      //
+      // Configure the bank encoding
+      // Use a 6-bit key into a lookup table.
+      // Key (index) = RRRBCC, where CC is the number of Columns minus 9,
+      // RRR is the number of Rows minus 12, and B is the number of banks
+      // minus 3.
+      //
+      Value8 = Cols;
+      Value8 |= (Banks == 1) ? 4 : 0;
+      Value8 |= Rows << 3;
+
+      if (MemTCheckBankAddr3 (Value8, &i)) {
+        //
+        // Mask value=(2pow(rows+cols+banks+3)-1)>>8,
+        // or 2pow(rows+cols+banks-5)-1
+        //
+        Value8 = (Rows + 12) + (Cols + 9) + (Banks + 3) + 3 - 8;
+        if (MCTPtr->Status[Sb128bitmode]) {
+          Value8++;
+        }
+
+        DCTPtr->Timings.CsPresent |= (UINT16)1 << ChipSel;
+
+        if (Ranks >= 2) {
+          DCTPtr->Timings.CsPresent |= (UINT16)1 << (ChipSel + 1);
+        }
+        //
+        // Determine LRDIMM Rank Multiplication
+        //
+        if (TechPtr->TechnologySpecificHook[LrdimmRankMultiplication] (TechPtr, &DimmID)) {
+          //
+          // Increase the CS Size by the rank multiplication factor
+          //
+          Value8 += ((NBPtr->ChannelPtr->LrDimmRankMult[DimmID]) >> 1);
+          CsMask = ((UINT32)1 << Value8) - 1;
+          CsMask &= NBPtr->CsRegMsk;
+          CsMask |= (NBPtr->GetBitField (NBPtr, BFRankDef0 + DimmID) & 0x03);
+        } else {
+          CsMask = ((UINT32)1 << Value8) - 1;
+          CsMask &= NBPtr->CsRegMsk;
+        }
+        //
+        //  Update the DRAM CS Mask and BankAddrReg for this chipselect
+        //
+        if ((DCTPtr->Timings.CsPresent & (UINT16)3 << ChipSel) != 0) {
+          NBPtr->SetBitField (NBPtr, BFCSMask0Reg + (ChipSel >> 1), (CsMask));
+          BankAddrReg |= ((UINT32)i << (ChipSel << 1));
+        }
+      } else {
+        //
+        // Dimm is not supported, as no address mapping is found.
+        //
+        DCTPtr->Timings.CsPresent |= (UINT16)1 << ChipSel;
+        DCTPtr->Timings.CsTestFail |= (UINT16)1 << ChipSel;
+        if (Ranks >= 2) {
+          DCTPtr->Timings.CsPresent |= (UINT16)1 << (ChipSel + 1);
+          DCTPtr->Timings.CsTestFail |= (UINT16)1 << (ChipSel + 1);
+        }
+        PutEventLog (AGESA_ERROR, MEM_ERROR_NO_ADDRESS_MAPPING, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, DimmID, &NBPtr->MemPtr->StdHeader);
+        SetMemError (AGESA_ERROR, MCTPtr);
+      }
+    } //if (MemTCheckBankAddr3 (Value8, &i)
+  }
+  // For ranks that need to be excluded, the loading of this rank should be considered
+  // in timing, so need to set CsPresent before setting CsTestFail
+  if ((CSSpdCSE != 0) || (CSExclude != 0)) {
+    if (!NBPtr->MemPtr->ErrorHandling (MCTPtr, NBPtr->Dct, (CSSpdCSE | CSExclude), &NBPtr->MemPtr->StdHeader)) {
+      ASSERT (FALSE);
+    }
+  }
+
+  //  If there are no chip selects, we have an error situation.
+  if (DCTPtr->Timings.CsPresent == 0) {
+    PutEventLog (AGESA_ERROR, MEM_ERROR_NO_CHIPSELECT, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, 0, &NBPtr->MemPtr->StdHeader);
+    SetMemError (AGESA_ERROR, MCTPtr);
+  }
+
+  NBPtr->SetBitField (NBPtr, BFDramBankAddrReg, BankAddrReg);
+
+  return (BOOLEAN) (MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function returns the low bit that will be swapped to enable CS interleaving
+ *
+ *     @param[in]   BankEnc - AddrMap Bank encoding from F2x80
+ *     @param[in]   *LowBit - pointer to low bit
+ *     @param[in]   *HiBit  - pointer hight bit
+ *
+ */
+
+VOID
+MemTGetCSIntLvAddr3 (
+  IN       UINT8 BankEnc,
+     OUT   UINT8 *LowBit,
+     OUT   UINT8 *HiBit
+  )
+{
+  CONST UINT8 ArrCodesLo[] = {0, 8, 8, 0, 0, 8, 9, 8, 9, 9, 8, 9};
+  CONST UINT8 ArrCodesHi[] = {0, 20, 21, 0, 0, 22, 22, 23, 23, 24, 24, 25};
+  ASSERT (BankEnc < GET_SIZE_OF (ArrCodesLo));
+  ASSERT (BankEnc < GET_SIZE_OF (ArrCodesHi));
+  //  return ArrCodes[BankEnc];
+  *LowBit = ArrCodesLo[BankEnc];
+  *HiBit = ArrCodesHi[BankEnc];
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function determines if the checksum is correct
+ *
+ *     @param[in]   *SPDPtr - Pointer to SPD data
+ *
+ *     @return    TRUE  - CRC check passes
+ *     @return    FALSE - CRC check fails
+ */
+
+BOOLEAN
+STATIC
+MemTCRCCheck3 (
+  IN OUT   UINT8 *SPDPtr
+  )
+{
+  UINT16 Crc;
+  INT16 i;
+  INT16 j;
+  INT16 Count;
+
+  if (SPDPtr[SPD_TYPE] == JED_DDR3SDRAM) {
+    Count = (SPDPtr[SPD_BYTE_USED] & 0x80) ? 117 : 126;
+    Crc = 0;
+    for (j = 0; j < Count; j++) {
+      Crc = Crc ^ ((UINT16)SPDPtr[j] << 8);
+      for (i = 0; i < 8; i++) {
+        if (Crc & 0x8000) {
+          Crc = (Crc << 1) ^ 0x1021;
+        } else {
+          Crc = (Crc << 1);
+        }
+      }
+    }
+    if (*(UINT16 *) (SPDPtr + 126) == Crc) {
+      return TRUE;
+    }
+  }
+
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function returns the CAS latency of the current frequency (DCTPtr->Timings.Speed).
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return  CAS Latency
+ */
+
+UINT8
+STATIC
+MemTSPDGetTCL3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8  *SpdBufferPtr;
+  UINT8 CLdesired;
+  UINT8 CLactual;
+  UINT8 Dimm;
+  UINT8 Channel;
+  UINT16 CASLat;
+  UINT16 Mask16;
+  INT32 MTB_ps;
+  INT32 FTB_ps;
+  INT32 TAAmin_ps;
+  INT32 TCKproposed_ps;
+  INT32 Value32;
+  BOOLEAN CltFail;
+  MEM_NB_BLOCK *NBPtr;
+  DCT_STRUCT *DCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  DCTPtr = NBPtr->DCTPtr;
+
+  CASLat = 0xFFFF;
+  TAAmin_ps = 0;
+  CltFail = FALSE;
+
+  for (Channel = 0; Channel < NBPtr->ChannelCount; Channel++) {
+    NBPtr->SwitchChannel (NBPtr, Channel);
+    ChannelPtr = NBPtr->ChannelPtr;
+    for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+      if ((ChannelPtr->ChDimmValid & ((UINT8)1 << Dimm)) != 0) {
+        MemTGetDimmSpdBuffer3 (TechPtr, &SpdBufferPtr, Dimm);
+
+        // Step 1: Determine the common set of supported CAS Latency
+        // values for all modules on the memory Channel using the CAS
+        // Latencies Supported in SPD bytes 14 and 15.
+        //
+        CASLat &= ((UINT16)SpdBufferPtr[SPD_CASHI] << 8) | SpdBufferPtr[SPD_CASLO];
+
+        // Step 2: Determine tAAmin(all) which is the largest tAAmin
+        // value for all modules on the memory Channel (SPD byte 16).
+        //
+        MTB_ps = ((INT32) SpdBufferPtr[SPD_DIVIDENT] * 1000) / SpdBufferPtr[SPD_DIVISOR];
+        FTB_ps = (SpdBufferPtr[SPD_FTB] >> 4) / (SpdBufferPtr[SPD_FTB] & 0xF);
+        Value32 = (MTB_ps * SpdBufferPtr[SPD_TAA]) + (FTB_ps * (INT8) SpdBufferPtr[SPD_TAA_FTB]) ;
+        if (TAAmin_ps < Value32) {
+          TAAmin_ps = Value32;
+        }
+
+        // Step 3: Determine tCKmin(all) which is the largest tCKmin
+        // value for all modules on the memory Channel (SPD byte 12).
+        // * This step has been done in SPDGetTargetSpeed
+      }
+    }
+  }
+
+  TCKproposed_ps = 1000500 / DCTPtr->Timings.Speed;
+
+  // Step 4: For a proposed tCK value (tCKproposed) between tCKmin(all) and tCKmax,
+  // determine the desired CAS Latency. If tCKproposed is not a standard JEDEC
+  // value (2.5, 1.875, 1.5, or 1.25 ns) then tCKproposed must be adjusted to the
+  // next lower standard tCK value for calculating CLdesired.
+  // CLdesired = ceiling ( tAAmin(all) / tCKproposed )
+  // where tAAmin is defined in Byte 16. The ceiling function requires that the
+  // quotient be rounded up always.
+  //
+  CLdesired = (UINT8) ((TAAmin_ps + TCKproposed_ps - 1) / TCKproposed_ps);
+
+  // Step 5: Choose an actual CAS Latency (CLactual) that is greater than or equal
+  // to CLdesired and is supported by all modules on the memory Channel as
+  // determined in step 1. If no such value exists, choose a higher tCKproposed
+  // value and repeat steps 4 and 5 until a solution is found.
+  //
+  CLactual = 4;
+  for (Mask16 = 1; Mask16 < 0x8000; Mask16 <<= 1) {
+    if (CASLat & Mask16) {
+      if (CLdesired <= CLactual) {
+        break;
+      }
+    }
+    CLactual++;
+  }
+  if (Mask16 == 0x8000) {
+    CltFail = TRUE;
+  }
+
+  // Step 6: Once the calculation of CLactual is completed, the BIOS must also
+  // verify that this CAS Latency value does not exceed tAAmax, which is 20 ns
+  // for all DDR3 speed grades, by multiplying CLactual times tCKproposed. If
+  // not, choose a lower CL value and repeat steps 5 and 6 until a solution is found.
+  //
+  if ((TCKproposed_ps * CLactual) > 20000) {
+    CltFail = TRUE;
+  }
+
+  if (!CltFail) {
+    DCTPtr->Timings.CasL = CLactual;
+  } else {
+    //  Fail to find supported Tcl, use 6 clocks since it is required for all DDR3 speed bin.
+    DCTPtr->Timings.CasL = 6;
+  }
+
+  return DCTPtr->Timings.CasL;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function returns the encoded value of bank address.
+ *
+ *     @param[in]   Encode - RRRBCC, where CC is the number of Columns minus 9,
+ *                           RRR is the number of Rows minus 12, and B is the number of banks
+ *                           minus 3.
+ *     @param[out]  *Index - index in bank address table
+ *     @return      TRUE   - encoded value is found.
+ *                  FALSE  - encoded value is not found.
+ */
+
+BOOLEAN
+STATIC
+MemTCheckBankAddr3 (
+  IN       UINT8 Encode,
+     OUT   UINT8 *Index
+  )
+{
+  UINT8 i;
+  CONST UINT8 TabBankAddr[]  = {
+    0x3F, 0x01, 0x09, 0x3F, 0x3F, 0x11,
+    0x0A, 0x19, 0x12, 0x1A, 0x21, 0x22
+  };
+
+  for (i = 0; i < GET_SIZE_OF (TabBankAddr); i++) {
+    if (Encode == TabBankAddr[i]) {
+      *Index = i;
+      return TRUE;
+    }
+  }
+  return FALSE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *       This function returns a pointer to the SPD Buffer of a specific dimm on
+ *    the current channel.
+ *
+ *     @param[in,out] *TechPtr - Pointer to the MEM_TECH_BLOCK
+ *     @param[in,out] **SpdBuffer - Pointer to a pointer to a UINT8 Buffer
+ *     @param[in] Dimm - Dimm number
+ *
+ *
+ *     @return BOOLEAN - Value of DimmPresent
+ *                       TRUE = Dimm is present, pointer is valid
+ *                       FALSE = Dimm is not present, pointer has not been modified.
+ */
+
+BOOLEAN
+MemTGetDimmSpdBuffer3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN OUT   UINT8 **SpdBuffer,
+  IN       UINT8 Dimm
+  )
+{
+  CH_DEF_STRUCT *ChannelPtr;
+  SPD_DEF_STRUCT *SPDPtr;
+  BOOLEAN DimmPresent;
+
+  DimmPresent = FALSE;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+  ASSERT (Dimm < (sizeof (ChannelPtr->DimmSpdPtr) / sizeof (ChannelPtr->DimmSpdPtr[0])))
+  SPDPtr = ChannelPtr->DimmSpdPtr[Dimm];
+
+
+  if (SPDPtr != NULL) {
+    DimmPresent = SPDPtr->DimmPresent;
+    if (DimmPresent) {
+      *SpdBuffer = SPDPtr->Data;
+    }
+  }
+  return DimmPresent;
+}
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.h b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.h
new file mode 100644
index 0000000000..bf13c7f13c
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mtspd3.h
@@ -0,0 +1,180 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mtspd3.h
+ *
+ * Technology SPD support for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 85961 $ @e \$Date: 2013-01-14 19:58:20 -0600 (Mon, 14 Jan 2013) $
+ *
+ **/
+/*****************************************************************************
+  *
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  * ***************************************************************************
+  *
+ */
+
+#ifndef _MTSPD3_H_
+#define _MTSPD3_H_
+
+/*----------------------------------------------------------------------------
+ *   Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS)
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*-----------------------------------------------------------------------------
+ *                         DEFINITIONS AND MACROS
+ *
+ *-----------------------------------------------------------------------------
+ */
+
+/*===============================================================================
+ *   Jedec DDR III
+ *===============================================================================
+ */
+#define SPD_BYTE_USED     0
+#define SPD_TYPE         2              /* SPD byte read location */
+#define JED_DDR_SDRAM     7              /* Jedec defined bit field */
+#define JED_DDR2_SDRAM    8              /* Jedec defined bit field */
+#define JED_DDR3SDRAM    0xB            /* Jedec defined bit field */
+
+#define SPD_DIMM_TYPE    3
+#define SPD_ATTRIB      21
+#define JED_DIF_CK_MSK    0x20            /* Differential Clock Input */
+#define JED_RDIMM       1
+#define JED_MINIRDIMM   5
+#define JED_UDIMM       2
+#define JED_SODIMM       3
+#define JED_LRDIMM      0xB
+#define JED_72B_SOUDIMM 8
+#define JED_UNDEFINED   0                /* Undefined value */
+
+#define SPD_L_BANKS      4               /* [7:4] number of [logical] banks on each device */
+#define SPD_DENSITY     4               /* bit 3:0 */
+#define SPD_ROW_SZ       5               /* bit 5:3 */
+#define SPD_COL_SZ       5               /* bit 2:0 */
+#define SPD_RANKS       7               /* bit 5:3 */
+#define SPD_DEV_WIDTH    7               /* bit 2:0 */
+#define SPD_ECCBITS     8               /* bit 4:3 */
+#define JED_ECC         8
+#define SPD_RAWCARD     62              /* bit 2:0 */
+#define SPD_ADDRMAP     63              /* bit 0 */
+
+#define SPD_CTLWRD03     70              /* bit 7:4 */
+#define SPD_CTLWRD04     71              /* bit 3:0 */
+#define SPD_CTLWRD05     71              /* bit 7:4 */
+
+#define SPD_FTB          9
+
+#define SPD_DIVIDENT    10
+#define SPD_DIVISOR     11
+
+#define SPD_TCK         12
+#define SPD_CASLO       14
+#define SPD_CASHI       15
+#define SPD_TAA         16
+
+#define SPD_TRP         20
+#define SPD_TRRD        19
+#define SPD_TRCD        18
+#define SPD_TRAS        22
+#define SPD_TWR         17
+#define SPD_TWTR        26
+#define SPD_TRTP        27
+#define SPD_TRC         23
+#define SPD_UPPER_TRC   21              /* bit 7:4 */
+#define SPD_UPPER_TRAS  21              /* bit 3:0 */
+#define SPD_TFAW        29
+#define SPD_UPPER_TFAW  28              /* bit 3:0 */
+
+#define SPD_TCK_FTB     34
+#define SPD_TAA_FTB     35
+#define SPD_TRCD_FTB    36
+#define SPD_TRP_FTB     37
+#define SPD_TRC_FTB     38
+
+#define SPD_TRFC_LO     24
+#define SPD_TRFC_HI     25
+
+/*-----------------------------
+ * Jedec DDR II related equates
+ *-----------------------------
+ */
+
+#define CL_DEF          4              /* Default value for failsafe operation. 4=CL 6.0 T */
+#define T_DEF           4              /* Default value for failsafe operation. 4=2.5ns (cycle time) */
+
+#define BIAS_TRTP_T      4
+#define BIAS_TRCD_T      5
+#define BIAS_TRAS_T      15
+#define BIAS_TRC_T       11
+#define BIAS_TRRD_T      4
+#define BIAS_TWR_T       4
+#define BIAS_TRP_T       5
+#define BIAS_TWTR_T      4
+#define BIAS_TFAW_T      14
+
+#define MIN_TRTP_T       4
+#define MAX_TRTP_T       7
+#define MIN_TRCD_T       5
+#define MAX_TRCD_T       12
+#define MIN_TRAS_T       15
+#define MAX_TRAS_T       30
+#define MIN_TRC_T        11
+#define MAX_TRC_T        42
+#define MIN_TRRD_T       4
+#define MAX_TRRD_T       7
+#define MIN_TWR_T        5
+#define MAX_TWR_T        12
+#define MIN_TRP_T        5
+#define MAX_TRP_T        12
+#define MIN_TWTR_T       4
+#define MAX_TWTR_T       7
+#define MIN_TFAW_T       16
+#define MAX_TFAW_T       32
+
+/*----------------------------------------------------------------------------
+ *                         TYPEDEFS, STRUCTURES, ENUMS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           FUNCTIONS PROTOTYPE
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#endif  /* _MTSPD3_H_ */
+
+
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttecc3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttecc3.c
new file mode 100644
index 0000000000..abd7965c6e
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttecc3.c
@@ -0,0 +1,163 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttecc3.c
+ *
+ * Technology ECC byte support for registered DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+#include "AGESA.h"
+#include "mm.h"
+#include "mn.h"
+#include "mt.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTTECC3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *   This function sets the DQS ECC timings for registered DDR3
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTSetDQSEccTmgsRDdr3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  UINT8 Dct;
+  UINT8 Dimm;
+  UINT8 i;
+  UINT8 *WrDqsDly;
+  UINT16 *RcvEnDly;
+  UINT8 *RdDqsDly;
+  UINT8 *WrDatDly;
+  UINT8 EccByte;
+  INT16 TempValue;
+
+  MEM_NB_BLOCK *NBPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+
+  EccByte = TechPtr->MaxByteLanes ();
+  NBPtr = TechPtr->NBPtr;
+
+  if (NBPtr->MCTPtr->NodeMemSize) {
+    for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+      NBPtr->SwitchDCT (NBPtr, Dct);
+      if (NBPtr->DCTPtr->Timings.DctMemSize != 0) {
+        ChannelPtr = NBPtr->ChannelPtr;
+        for (Dimm = 0; Dimm < MAX_DIMMS_PER_CHANNEL; Dimm++) {
+          if (NBPtr->DCTPtr->Timings.CsEnabled & ((UINT16)3 << (Dimm * 2))) {
+            i = Dimm * TechPtr->DlyTableWidth ();
+            WrDqsDly = &ChannelPtr->WrDqsDlys[i];
+            RcvEnDly = &ChannelPtr->RcvEnDlys[i];
+            RdDqsDly = &ChannelPtr->RdDqsDlys[i];
+            WrDatDly = &ChannelPtr->WrDatDlys[i];
+            // Receiver DQS Enable:
+            // Receiver DQS enable for ECC bytelane = Receiver DQS enable for bytelane 3 -
+            //                                        [write DQS for bytelane 3 - write DQS for ECC]
+
+            TempValue = (INT16) RcvEnDly[3] - (INT16) (WrDqsDly[3] - WrDqsDly[EccByte]);
+            if (TempValue < 0) {
+              TempValue = 0;
+            }
+            RcvEnDly[EccByte] = (UINT16) TempValue;
+
+            // Read DQS:
+            // Read DQS for ECC bytelane = read DQS of byte lane 3
+            //
+            RdDqsDly[EccByte] = RdDqsDly[3];
+
+            // Write Data:
+            // Write Data for ECC bytelane = Write DQS for ECC +
+            //                               [write data for bytelane 3 - Write DQS for bytelane 3]
+            TempValue = (INT16) (WrDqsDly[EccByte] + (INT8) (WrDatDly[3] - WrDqsDly[3]));
+            if (TempValue < 0) {
+              TempValue = 0;
+            }
+            WrDatDly[EccByte] = (UINT8) TempValue;
+
+            NBPtr->SetTrainDly (NBPtr, AccessRcvEnDly, DIMM_BYTE_ACCESS (Dimm, EccByte), RcvEnDly[EccByte]);
+            NBPtr->SetTrainDly (NBPtr, AccessRdDqsDly, DIMM_BYTE_ACCESS (Dimm, EccByte), RdDqsDly[EccByte]);
+            NBPtr->SetTrainDly (NBPtr, AccessWrDatDly, DIMM_BYTE_ACCESS (Dimm, EccByte), WrDatDly[EccByte]);
+          }
+        }
+      }
+    }
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
\ No newline at end of file
diff --git a/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttwl3.c b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttwl3.c
new file mode 100644
index 0000000000..361b56a896
--- /dev/null
+++ b/src/vendorcode/amd/agesa/f16kb/Proc/Mem/Tech/DDR3/mttwl3.c
@@ -0,0 +1,718 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * mttwl3.c
+ *
+ * Technology Phy assisted write levelization for DDR3
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: (Mem/Tech/DDR3)
+ * @e \$Revision: 84150 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ *
+ **/
+/*****************************************************************************
+*
+ * Copyright (c) 2008 - 2013, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of
+ *       its contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+* ***************************************************************************
+*
+*/
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "Ids.h"
+#include "mm.h"
+#include "mn.h"
+#include "mu.h"
+#include "mt.h"
+#include "mp.h"
+#include "mtsdi3.h"
+#include "mtlrdimm3.h"
+#include "merrhdl.h"
+#include "OptionMemory.h"
+#include "PlatformMemoryConfiguration.h"
+#include "GeneralServices.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_MEM_TECH_DDR3_MTTWL3_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+extern MEM_PSC_FLOW_BLOCK* memPlatSpecFlowArray[];
+
+/*----------------------------------------------------------------------------
+ *                           TYPEDEFS AND STRUCTURES
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ *                        PROTOTYPES OF LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+BOOLEAN
+STATIC
+MemTWriteLevelizationHw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Pass
+  );
+
+VOID
+STATIC
+MemTWLPerDimmHw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Pass
+  );
+
+VOID
+STATIC
+MemTPrepareDIMMs3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 TargetDIMM,
+  IN       BOOLEAN Wl
+  );
+
+VOID
+STATIC
+MemTProcConfig3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Pass
+  );
+
+VOID
+STATIC
+MemTBeginWLTrain3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm
+  );
+
+/*----------------------------------------------------------------------------
+ *                            EXPORTED FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes first pass of Phy assisted write levelization
+ *      for a specific node (DDR800).
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTWriteLevelizationHw3Pass1 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  return MemTWriteLevelizationHw3 (TechPtr, 1);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executes second pass of Phy assisted write levelization
+ *      for a specific node (DDR1066 and above).
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTWriteLevelizationHw3Pass2 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  // If current speed is higher than start-up speed, do second pass of WL
+  if (TechPtr->NBPtr->DCTPtr->Timings.Speed > TechPtr->NBPtr->StartupSpeed) {
+    return MemTWriteLevelizationHw3 (TechPtr, 2);
+  }
+  return TRUE;
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function prepares for Phy assisted training.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTPreparePhyAssistedTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  //  Disable auto refresh by configuring F2x[1, 0]8C[DisAutoRefresh] = 1.
+  TechPtr->NBPtr->BrdcstSet (TechPtr->NBPtr, BFDisAutoRefresh, 1);
+  //  Disable ZQ calibration short command by configuring F2x[1, 0]94[ZqcsInterval] = 00b.
+  TechPtr->NBPtr->BrdcstSet (TechPtr->NBPtr, BFZqcsInterval, 0);
+  //  Attempt to get the seeds value from PSC tables for WL and RxEn pass1 training if applicable.
+  if (!TechPtr->NBPtr->PsPtr->MemPGetPass1Seeds (TechPtr->NBPtr)) {
+    ASSERT (FALSE);
+  }
+
+  return (BOOLEAN) (TechPtr->NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function revert to normal settings when exiting from Phy assisted training.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTExitPhyAssistedTraining (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK *NBPtr;
+  NBPtr = TechPtr->NBPtr;
+
+  //  13.Program F2x[1, 0]8C[DisAutoRefresh] = 0.
+  NBPtr->BrdcstSet (NBPtr, BFDisAutoRefresh, 0);
+  //  14.Program F2x[1, 0]94[ZqcsInterval] to the proper interval for the current memory configuration.
+  NBPtr->BrdcstSet (NBPtr, BFZqcsInterval, 2);
+  NBPtr->FamilySpecificHook[ExitPhyAssistedTraining] (NBPtr, NBPtr);
+
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/*----------------------------------------------------------------------------
+ *                              LOCAL FUNCTIONS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function executed hardware based write levelization for a specific die
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in] Pass - Pass number (1 (400Mhz) or 2 (>400Mhz))
+ *
+ *     @pre   Auto refresh and ZQCL must be disabled
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+STATIC
+MemTWriteLevelizationHw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Pass
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  DCT_STRUCT *DCTPtr;
+  UINT8 Dct;
+  UINT8 ChipSel;
+
+  NBPtr = TechPtr->NBPtr;
+
+  IDS_HDT_CONSOLE (MEM_STATUS, "\nStart write leveling\n");
+  AGESA_TESTPOINT (TpProcMemWriteLevelizationTraining, &(NBPtr->MemPtr->StdHeader));
+  // Begin DQS Write timing training
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    DCTPtr = NBPtr->DCTPtr;
+
+    TechPtr->WLCriticalDelay = 0x00;
+
+    //training for each Dimm/CS
+    for (ChipSel = 0; ChipSel < NBPtr->CsPerChannel; ChipSel = ChipSel + NBPtr->CsPerDelay) {
+      if ((DCTPtr->Timings.CsEnabled & ((UINT16) ((NBPtr->CsPerDelay == 2)? 3 : 1) << ChipSel)) != 0) {
+        if (!(NBPtr->MCTPtr->Status[SbLrdimms]) || ((NBPtr->ChannelPtr->LrDimmPresent & ((UINT8) 1 << (ChipSel >> 1))) != 0)) {
+          IDS_HDT_CONSOLE (MEM_STATUS, "\t\tCS %d\n", ChipSel);
+          MemTWLPerDimmHw3 (TechPtr, (ChipSel / NBPtr->CsPerDelay), Pass);
+        }
+      }
+    }
+
+    NBPtr->FamilySpecificHook[CalcWrDqDqsEarly] (NBPtr, NULL);
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "End write leveling\n\n");
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function initializes per DIMM write levelization
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in] Dimm - DIMM to be trained
+ *     @param[in] Pass - Pass number (1 (400Mhz) or 2 (>400Mhz))
+ *
+ */
+
+VOID
+STATIC
+MemTWLPerDimmHw3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Pass
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  MEM_NB_BLOCK  *NBPtr;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+
+  ASSERT (Dimm < (NBPtr->CsPerChannel / NBPtr->CsPerDelay));
+
+  // 1. A. Specify the target Dimm that is to be trained by programming
+  //     F2x[1, 0]9C_x08[TrDimmSel].
+  NBPtr->SetBitField (NBPtr, BFTrDimmSel, Dimm);
+
+  TechPtr->TargetDIMM = Dimm;
+  NBPtr->FamilySpecificHook[InitPerNibbleTrn] (NBPtr, NULL);
+  for (TechPtr->TrnNibble = NIBBLE_0; TechPtr->TrnNibble <= (NBPtr->FamilySpecificHook[TrainWlPerNibble] (NBPtr, &Dimm)? NIBBLE_0 : NIBBLE_1); TechPtr->TrnNibble++) {
+    // 2. Prepare the DIMMs for write levelization using DDR3-defined
+    // MR commands.
+    MemTPrepareDIMMs3 (TechPtr, Dimm, TRUE);
+
+    // 3. After the DIMMs are configured, BIOS waits 40 MEMCLKs to
+    //     satisfy DDR3-defined internal DRAM timing.
+    NBPtr->WaitXMemClks (NBPtr, 40);
+
+    // 4. Configure the processor's DDR phy for write levelization training:
+    MemTProcConfig3 (TechPtr, Dimm, Pass);
+
+    // 5. Begin write levelization training
+    MemTBeginWLTrain3 (TechPtr, Dimm);
+  }
+  // 7. Program the target Dimm back to normal operation
+  MemTPrepareDIMMs3 (TechPtr, Dimm, FALSE);
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function prepares the DIMMS for Write Levelization
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in] TargetDIMM - DIMM to be trained
+ *     @param[in] Wl - Indicates if WL mode should be enabled
+ *
+ */
+
+VOID
+STATIC
+MemTPrepareDIMMs3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 TargetDIMM,
+  IN       BOOLEAN Wl
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  UINT8 ChipSel;
+
+  NBPtr = TechPtr->NBPtr;
+
+  AGESA_TESTPOINT (TpProcMemWlPrepDimms, &(NBPtr->MemPtr->StdHeader));
+  ASSERT (TargetDIMM < (NBPtr->CsPerChannel / NBPtr->CsPerDelay));
+  TechPtr->TargetDIMM = TargetDIMM;
+  if (!(TechPtr->TechnologySpecificHook[WlTrainingPrepareLrdimm] (TechPtr, &Wl))) {
+    for (ChipSel = 0; ChipSel < MAX_CS_PER_CHANNEL; ChipSel++) {
+      if ((NBPtr->DCTPtr->Timings.CsPresent & ((UINT16)1 << ChipSel)) != 0) {
+        NBPtr->SetBitField (NBPtr, BFMrsChipSel, ChipSel);
+        // Set MR1 to F2x7C[MrsAddress], F2x7C[MrsBank]=1
+        MemTEMRS13 (TechPtr, Wl, TargetDIMM);
+        NBPtr->SendMrsCmd (NBPtr);
+        // Set MR2 to F2x7C[MrsAddress], F2x7C[MrsBank]=1
+        MemTEMRS23 (TechPtr);
+        // Send command
+        NBPtr->SendMrsCmd (NBPtr);
+      }
+    }
+    if (Wl) {
+      // Program WrLvOdt for the Target DIMM (or CS)
+      NBPtr->SetBitField (NBPtr, BFWrLvOdt, NBPtr->ChannelPtr->PhyWLODT[TargetDIMM]);
+    }
+  }
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function programs seed values for Write Levelization
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in] Dimm - DIMM to be trained
+ *     @param[in] Pass - Pass for WL training (1 - 400Mhz or 2 - >400Mhz)
+ *
+ */
+
+VOID
+STATIC
+MemTProcConfig3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm,
+  IN       UINT8 Pass
+  )
+{
+  DIE_STRUCT *MCTPtr;
+  CH_DEF_STRUCT *ChannelPtr;
+  MEM_NB_BLOCK *NBPtr;
+  UINT16 WrDqsDly;
+  // Memclk Delay incurred by register.
+  UINT8 MemClkRegDly;
+  UINT8 ByteLane;
+  UINT8 DefaultSeed;
+  UINT8 CurrentSeed;
+  UINT8 *Seed;
+  UINT8 RCW2;
+  UINT16 Speed;
+  INT16 WrDqsBias;
+
+  NBPtr = TechPtr->NBPtr;
+  MCTPtr = NBPtr->MCTPtr;
+  ChannelPtr = TechPtr->NBPtr->ChannelPtr;
+
+  AGESA_TESTPOINT (TpProcMemWlConfigDimms, &(NBPtr->MemPtr->StdHeader));
+  RCW2 = ChannelPtr->CtrlWrd02[Dimm];
+  Speed = TechPtr->NBPtr->DCTPtr->Timings.Speed;
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\t Byte: 00 01 02 03 04 05 06 07 ECC\n");
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tSeeds: ");
+  //  Program an initialization Value to registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 to set
+  //  the gross and fine delay for all the byte lane fields. If the target frequency is different than 400MHz,
+  //  BIOS must execute two training passes for each Dimm. For pass 1 at a 400MHz MEMCLK frequency,
+  //  use an initial total delay value.
+  if (Pass == 1) {
+    //
+    // Get the default value of seed
+    //
+    if (MCTPtr->Status[SbRegistered]) {
+      //
+      // RDIMM
+      //
+      if (Speed == DDR667_FREQUENCY) {
+        DefaultSeed = ((RCW2 & BIT0) == 0) ? 0x3B : 0x4B;
+      } else {
+        DefaultSeed = ((RCW2 & BIT0) == 0) ? 0x41 : 0x51;
+      }
+    } else if (ChannelPtr->SODimmPresent != 0) {
+      //
+      // SODIMMM
+      //
+      DefaultSeed = 0x12;
+    } else if (MCTPtr->Status[SbLrdimms]) {
+      //
+      // LRDIMM
+      //
+      DefaultSeed = 0xF7;
+    } else {
+      //
+      // UDIMMM
+      //
+      DefaultSeed = 0x1A;
+    }
+
+    NBPtr->FamilySpecificHook[OverrideWLSeed] (NBPtr, &DefaultSeed);
+    ASSERT (Speed >= DDR667_FREQUENCY);
+
+    // Get platform override seed
+    Seed = (UINT8 *) FindPSOverrideEntry (NBPtr->RefPtr->PlatformMemoryConfiguration, PSO_WL_SEED, MCTPtr->SocketId, ChannelPtr->ChannelID, Dimm,
+                                          &(NBPtr->MCTPtr->LogicalCpuid), &(NBPtr->MemPtr->StdHeader));
+    for (ByteLane = 0; ByteLane < TechPtr->DlyTableWidth (); ByteLane++) {
+      // This includes ECC as byte 8
+      CurrentSeed = ((Seed != NULL) ? Seed[ByteLane] : DefaultSeed);
+      ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane] = CurrentSeed;
+
+      if (NBPtr->IsSupported[WLSeedAdjust]) {
+        if ((CurrentSeed & 0x20) != 0) {
+          // If (SeedGross is odd) then SeedPreGross = 1
+          CurrentSeed = (CurrentSeed & 0x1F) | 0x20;
+        } else {
+          // If (SeedGross is even) then SeedPreGross = 2
+          CurrentSeed = (CurrentSeed & 0x1F) | 0x40;
+        }
+      }
+
+      NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), CurrentSeed);
+      IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", CurrentSeed);
+    }
+  } else {
+    //10.Multiply the previously saved delay values in Pass 1, step #5 by (target frequency)/400 to find
+    //the gross and fine delay initialization values at the target frequency. Use these values as the initial
+    //seed values when executing Pass 2, step #4.
+    for (ByteLane = 0; ByteLane < TechPtr->DlyTableWidth (); ByteLane++) {
+      // This includes ECC as byte 8
+      WrDqsDly = ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane];
+      TechPtr->Bytelane = ByteLane;
+      NBPtr->FamilySpecificHook[TrainWlPerNibbleSeed] (NBPtr, &WrDqsDly);
+
+      if (MCTPtr->Status[SbRegistered]) {
+        //
+        // For Registered Dimms
+        //
+        MemClkRegDly = ((RCW2 & BIT0) == 0) ? 0x20 : 0x30;
+      } else {
+        //
+        // Unbuffered Dimms and LRDIMMs
+        //
+        MemClkRegDly = 0;
+      }
+      //
+      // Recover any adjustmen to delay for WrDqDqsEarly
+      //
+      WrDqsBias = 0;
+      NBPtr->FamilySpecificHook[AdjustWrDqsBeforeSeedScaling] (NBPtr, &WrDqsBias);
+
+      // Scale WrDqsDly to the next speed
+      WrDqsDly = (UINT16) (MemClkRegDly + ((((INT32) WrDqsDly - MemClkRegDly - WrDqsBias) * Speed) / TechPtr->PrevSpeed));
+
+      ChannelPtr->WrDqsDlys[Dimm * TechPtr->DlyTableWidth () + ByteLane] = (UINT8) WrDqsDly;
+
+      if (NBPtr->IsSupported[WLSeedAdjust]) {
+        if ((WrDqsDly & 0x20) != 0) {
+          // If (SeedGross is odd) then SeedPreGross = 1
+          WrDqsDly = (WrDqsDly & 0x1F) | 0x20;
+        } else {
+          // If (SeedGross is even) then SeedPreGross = 2
+          WrDqsDly = (WrDqsDly & 0x1F) | 0x40;
+        }
+      }
+      NBPtr->SetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), WrDqsDly);
+      IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", WrDqsDly);
+    }
+  }
+  IDS_HDT_CONSOLE (MEM_FLOW, "\n");
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function begins WL training for a specific DIMM
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *     @param[in] Dimm - DIMM to be trained
+ *
+ */
+
+VOID
+STATIC
+MemTBeginWLTrain3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr,
+  IN       UINT8 Dimm
+  )
+{
+  MEM_DATA_STRUCT *MemPtr;
+  DIE_STRUCT *MCTPtr;
+  MEM_NB_BLOCK *NBPtr;
+  UINT8 ByteLane;
+  UINT8 Seed;
+  UINT8 Delay;
+  INT16 Delay16;
+
+  NBPtr = TechPtr->NBPtr;
+  MemPtr = NBPtr->MemPtr;
+  MCTPtr = NBPtr->MCTPtr;
+
+  AGESA_TESTPOINT (TpProcMemWlTrainTargetDimm, &(MemPtr->StdHeader));
+  // Assert ODT pins for write leveling
+  NBPtr->SetBitField (NBPtr, BFWrLvOdtEn, 1);
+
+  // Wait 10 MEMCLKs to allow for ODT signal settling.
+  NBPtr->WaitXMemClks (NBPtr, 10);
+
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\tWrtLvTrEn = 1\n");
+  // Program F2x[1, 0]9C_x08[WrtLlTrEn]=1.
+  NBPtr->SetBitField (NBPtr, BFWrtLvTrEn, 1);
+
+  //  Wait 200 MEMCLKs.
+  NBPtr->WaitXMemClks (NBPtr, 200);
+
+  //  Program F2x[1, 0]9C_x08[WrtLlTrEn]=0.
+  NBPtr->SetBitField (NBPtr, BFWrtLvTrEn, 0);
+
+  //  Read from registers F2x[1, 0]9C_x[51:50] and F2x[1, 0]9C_x52 to get the gross and fine Delay settings
+  //  for the target Dimm and save these values.
+  IDS_HDT_CONSOLE (MEM_FLOW, "\t\t\t  PRE: ");
+  for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+    // This includes ECC as byte 8
+    Seed = NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane];
+    Delay = (UINT8)NBPtr->GetTrainDly (NBPtr, AccessPhRecDly, DIMM_BYTE_ACCESS (Dimm, ByteLane));
+    IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", Delay);
+
+    TechPtr->Bytelane = ByteLane;
+    TechPtr->TargetDIMM = Dimm;
+    NBPtr->FamilySpecificHook[TrainWlPerNibbleAdjustWLDly] (NBPtr, &Delay);
+
+    if (NBPtr->IsSupported[WLSeedAdjust]) {
+      // Recover WrDqsGrossDly:
+      // WrDqsGrossDly = SeedGross + PhRecGrossDlyByte - SeedPreGross
+      if ((Seed & 0x20) != 0) {
+        // If (SeedGross is odd) then SeedPreGross = 1
+        if ((NBPtr->IsSupported[WLNegativeDelay]) && ((Seed & 0x80) != 0)) {
+          // If the seed was negative, save the most negative delay in WLCriticalDelay
+          TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, (INT16)Delay - 0x40);
+          Delay -= 0x40;
+        } else {
+          Delay += (Seed & 0xE0) - 0x20;
+        }
+      } else {
+        // If (SeedGross is even) then SeedPreGross = 2
+        if (((Seed & 0xE0) == 0) && (Delay < 0x40)) {
+          // If SeedGross is 0 and PhRecGrossDlyByte is less than SeedPreGross,
+          // we have a negative result and need to program the delay to 0
+          if (NBPtr->IsSupported[WLNegativeDelay]) {
+            //
+            // Save the lowest negative delay value across all Dimms and Bytelanes
+            //
+            TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, (INT16)Delay - 0x40);
+            Delay -= 0x40;
+          } else {
+            Delay = 0;
+          }
+        } else {
+          if (NBPtr->GetBitField (NBPtr, BFWrDqDqsEarly) != 0) {
+            Delay = Delay + (Seed & 0xE0);
+            Delay16 = Delay - 0x40;
+            Delay = (UINT8)Delay16;
+            TechPtr->WLCriticalDelay = MIN (TechPtr->WLCriticalDelay, Delay16);
+          } else {
+            Delay += (Seed & 0xE0) - 0x40;
+          }
+        }
+      }
+    } else if (((Seed >> 5) == 0) && ((Delay >> 5) == 3)) {
+      IDS_OPTION_HOOK (IDS_CHECK_NEGATIVE_WL, &Delay, &(TechPtr->NBPtr->MemPtr->StdHeader));
+      // If seed has gross delay of 0 and PRE has gross delay of 3,
+      // then round the total delay of TxDqs to 0.
+      Delay = 0;
+    }
+
+    if ((!NBPtr->IsSupported[WLNegativeDelay]) && ((Delay > (Seed + 0x20)) || (Seed > (Delay + 0x20)))) {
+      //
+      // If PRE comes back with more than Seed +/- 0x20, then this is an
+      //   unexpected condition.  Log the condition.
+      //
+      PutEventLog (AGESA_ERROR, MEM_ERROR_WL_PRE_OUT_OF_RANGE, NBPtr->Node, NBPtr->Dct, NBPtr->Channel, ((Seed << 8) + Delay), &NBPtr->MemPtr->StdHeader);
+    }
+    NBPtr->SetTrainDly (NBPtr, AccessWrDqsDly, DIMM_BYTE_ACCESS (Dimm, ByteLane), Delay);
+    NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane] = Delay;
+  }
+
+  IDS_HDT_CONSOLE_DEBUG_CODE (
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\t\t\tWrDqs: ");
+    for (ByteLane = 0; ByteLane < (MCTPtr->Status[SbEccDimms] ? 9 : 8); ByteLane++) {
+      IDS_HDT_CONSOLE (MEM_FLOW, "%02x ", NBPtr->ChannelPtr->WrDqsDlys[(Dimm * TechPtr->DlyTableWidth ()) + ByteLane]);
+    }
+    IDS_HDT_CONSOLE (MEM_FLOW, "\n\n");
+  );
+
+  // Disable write leveling ODT pins
+  NBPtr->SetBitField (NBPtr, BFWrLvOdtEn, 0);
+
+  // Wait 10 MEMCLKs to allow for ODT signal settling.
+  NBPtr->WaitXMemClks (NBPtr, 10);
+
+}
+
+/* -----------------------------------------------------------------------------*/
+/**
+ *
+ *      This function programs register after Phy assisted training is finish.
+ *
+ *     @param[in,out]   *TechPtr   - Pointer to the MEM_TECH_BLOCK
+ *
+ *     @return          TRUE -  No fatal error occurs.
+ *     @return          FALSE - Fatal error occurs.
+ */
+
+BOOLEAN
+MemTExitPhyAssistedTrainingClient3 (
+  IN OUT   MEM_TECH_BLOCK *TechPtr
+  )
+{
+  MEM_NB_BLOCK  *NBPtr;
+  UINT8  Dct;
+  UINT8  ChipSel;
+  NBPtr = TechPtr->NBPtr;
+
+  NBPtr->FamilySpecificHook[ReEnablePhyComp] (NBPtr, NBPtr);
+  NBPtr->BrdcstSet (NBPtr, BFRxPtrInitReq, 1);
+  NBPtr->PollBitField (NBPtr, BFRxPtrInitReq, 0, PCI_ACCESS_TIMEOUT, TRUE);
+  NBPtr->BrdcstSet (NBPtr, BFDisDllShutdownSR, 1);
+  NBPtr->BrdcstSet (NBPtr, BFEnterSelfRef, 1);
+  NBPtr->PollBitField (NBPtr, BFEnterSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+  IDS_HDT_CONSOLE (MEM_FLOW, "\tMemClkAlign = 2\n");
+  NBPtr->BrdcstSet (NBPtr, BFDbeGskMemClkAlignMode, 2);
+  NBPtr->BrdcstSet (NBPtr, BFExitSelfRef, 1);
+  NBPtr->PollBitField (NBPtr, BFExitSelfRef, 0, PCI_ACCESS_TIMEOUT, TRUE);
+  if (NBPtr->IsSupported[SetDllShutDown]) {
+    NBPtr->BrdcstSet (NBPtr, BFDisDllShutdownSR, 0);
+  }
+
+  // Calculate Max Latency for both channels to prepare for position training
+  for (Dct = 0; Dct < NBPtr->DctCount; Dct++) {
+    IDS_HDT_CONSOLE (MEM_STATUS, "\tDct %d\n", Dct);
+    NBPtr->SwitchDCT (NBPtr, Dct);
+    if (TechPtr->FindMaxDlyForMaxRdLat (TechPtr, &ChipSel)) {
+      NBPtr->SetMaxLatency (NBPtr, TechPtr->MaxDlyForMaxRdLat);
+    }
+  }
+  return (BOOLEAN) (NBPtr->MCTPtr->ErrCode < AGESA_FATAL);
+}