diff options
author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2017-08-24 08:18:26 +0300 |
---|---|---|
committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2017-08-28 14:36:28 +0000 |
commit | e363894d066fe33e826847b3cc4a32a04587d080 (patch) | |
tree | c8239d44ce1facec6308a4c34d945655a94a5fa4 /src/vendorcode/amd/agesa/f10/Proc/HT/Features | |
parent | e029c18f67f72fc5542254c58d2d4d9025f6282f (diff) |
AGESA f10 vendorcode: Remove refcode sources
We never had a board in the tree that implements this.
Change-Id: Idce32a20c24e31eb52f8509d4a7cccfc24cf17cf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Diffstat (limited to 'src/vendorcode/amd/agesa/f10/Proc/HT/Features')
16 files changed, 0 insertions, 4033 deletions
diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatDynamicDiscovery.c b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatDynamicDiscovery.c deleted file mode 100644 index ca650ae54d..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatDynamicDiscovery.c +++ /dev/null @@ -1,779 +0,0 @@ -/** - * @file - * - * Coherent Discovery Routines. - * - * Contains routines for discovery, along with Temporary routing. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - -#include "AGESA.h" -#include "Ids.h" -#include "Topology.h" -#include "htFeat.h" -#include "htInterface.h" -#include "htNotify.h" -#include "htNb.h" -#include "htFeatDynamicDiscovery.h" -#include "Filecode.h" -#define FILECODE PROC_HT_FEATURES_HTFEATDYNAMICDISCOVERY_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ -#define LOGICAL_PROCESSOR_NONE 0xFF - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ -/** - * Status result from exploring for a new node on a link. - */ -typedef enum { - ExploreNodeStatusNew, ///< A new node was discovered - ExploreNodeStatusGood, ///< A new link to an already known node was discovered - ExploreNodeStatusStop, ///< Discovery must halt now. - ExploreNodeStatusIgnore, ///< A new node was ignored on purpose. - ExploreNodeStatusMax ///< Use for bounds check and limit only -} EXPLORE_NODE_STATUS; - -/** - * Save all the information needed about a node at its discovery. - * - * When we can access the node at a known temporary route, read everything needed - * to do node to socket mapping, post to ap mailbox at later times. - */ -typedef struct { - UINT8 LogicalProcessor; ///< Independent of Node,Socket group nodes into logical - ///< processors based on discovery. - UINT8 CurrentNode; ///< The node from which discovery occurred. - UINT8 CurrentLink; ///< The link on that node which we explored. - UINT8 PackageLink; ///< The package level link corresponding to CurrentLink. - UINT8 CurrentModuleType; ///< The current node's module type, Single or Multiple. - UINT8 CurrentModule; ///< This current node's module id. - UINT8 HardwareSocket; ///< Save the hardware socket strap (for hardware socket method). - UINT8 NewModuleType; ///< The new node's module type, Single or Multiple. - UINT8 NewModule; ///< The new node's module id. -} NEW_NODE_SAVED_INFO_ITEM; - -/** - * A "no info" initializer for saved new node info. - */ -STATIC CONST NEW_NODE_SAVED_INFO_ITEM ROMDATA NoInfoSavedYet = -{ - LOGICAL_PROCESSOR_NONE, 0, 0, 0, 0, 0, 0, 0 -}; - -/** - * A list of all the new node info, indexed by each new node's nodeid. - */ -typedef NEW_NODE_SAVED_INFO_ITEM (*NEW_NODE_SAVED_INFO_LIST) [MAX_NODES]; - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*************************************************************************** - *** GENERIC HYPERTRANSPORT DISCOVERY CODE *** - ***************************************************************************/ - -/*-----------------------------------------------------------------------------------*/ -/** - * Ensure a request / response route from target Node to bsp. - * - * Since target Node is always a predecessor of actual target Node, each Node gets a - * route to actual target on the Link that goes to target. The routing produced by - * this routine is adequate for config access during discovery, but NOT for coherency. - * - * @param[in] TargetNode the path to actual target goes through target - * @param[in] ActualTarget the ultimate target being routed to - * @param[in] State our global state, port config info - * - */ -VOID -STATIC -routeFromBSP ( - IN UINT8 TargetNode, - IN UINT8 ActualTarget, - IN STATE_DATA *State - ) -{ - UINT8 PredecessorNode; - UINT8 PredecessorLink; - UINT8 CurrentPair; - - if (TargetNode == 0) { - return; // BSP has no predecessor, stop - } - - // Search for the Link that connects TargetNode to its predecessor - CurrentPair = 0; - while ((*State->PortList)[CurrentPair*2 + 1].NodeID != TargetNode) { - CurrentPair++; - ASSERT (CurrentPair < State->TotalLinks); - } - - PredecessorNode = (*State->PortList)[ (CurrentPair * 2)].NodeID; - PredecessorLink = (*State->PortList)[ (CurrentPair * 2)].Link; - - // Recursively call self to ensure the route from the BSP to the Predecessor - // Node is established - routeFromBSP (PredecessorNode, ActualTarget, State); - - State->Nb->WriteRoutingTable (PredecessorNode, ActualTarget, PredecessorLink, State->Nb); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Test Compatibility of a new node, and handle failure. - * - * Make the compatibility test call for the northbridge. - * If the new node is incompatible, force 1P. Notify the event. - * Additionally, invoke the northbridge stop link method, to - * implement isolation of the BSP from any incompatible node. - * - * @param[in] CurrentNode The node we are exploring from - * @param[in] CurrentLink The Link on that node to explore. - * @param[in] State Access to Northbridge interface. - * - * @retval TRUE Check is Ok - * @retval FALSE Check failed and is handled - */ -BOOLEAN -STATIC -CheckCompatible ( - IN UINT8 CurrentNode, - IN UINT8 CurrentLink, - IN STATE_DATA *State - ) -{ - UINT8 NodeToKill; - BOOLEAN Result; - - Result = TRUE; - - // Check the northbridge of the Node we just found, to make sure it is compatible - // before doing anything else to it. - // - if (State->Nb->IsIllegalTypeMix ((CurrentNode + 1), State->Nb)) { - IDS_ERROR_TRAP; - - // Notify BIOS of event - NotifyFatalCohProcessorTypeMix ( - CurrentNode, - CurrentLink, - State->NodesDiscovered, - State - ); - - // If Node is not compatible, force boot to 1P - // If they are not compatible stop cHT init and: - // 1. Disable all cHT Links on the BSP - // 2. Configure the BSP routing tables as a UP. - // 3. Notify main BIOS. - // - State->NodesDiscovered = 0; - State->TotalLinks = 0; - // Abandon our coherent Link data structure. At this point there may - // be coherent Links on the BSP that are not yet in the portList, and - // we have to turn them off anyway. So depend on the hardware to tell us. - // - for (CurrentLink = 0; CurrentLink < State->Nb->MaxLinks; CurrentLink++) { - // Stop all Links which are connected, coherent, and ready - if (State->Nb->VerifyLinkIsCoherent (0, CurrentLink, State->Nb)) { - State->Nb->StopLink (0, CurrentLink, State, State->Nb); - } - } - - for (NodeToKill = 0; NodeToKill < MAX_NODES; NodeToKill++) { - State->Nb->WriteFullRoutingTable (0, NodeToKill, ROUTE_TO_SELF, ROUTE_TO_SELF, 0, State->Nb); - } - - State->HtInterface->CleanMapsAfterError (State); - - // End Coherent Discovery - Result = FALSE; - } - return Result; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Check the system MP capability with a new node and handle any failure. - * - * Invoke the northbridge MP capability check. If it fails, notify the event and force - * 1P. Should not need to stop links on the BSP. - * - * @param[in] CurrentNode The node we are exploring from - * @param[in] CurrentLink The Link on that node to explore. - * @param[in] State Access to Northbridge interface. - * - * @retval TRUE Check is Ok - * @retval FALSE Check Failed and is handled - */ -BOOLEAN -STATIC -CheckCapable ( - IN UINT8 CurrentNode, - IN UINT8 CurrentLink, - IN STATE_DATA *State - ) -{ - UINT8 NodeToKill; - BOOLEAN Result; - - Result = TRUE; - - // Check the capability of northbridges against the currently known configuration - if (State->Nb->IsExceededCapable ((CurrentNode + 1), State, State->Nb)) { - IDS_ERROR_TRAP; - // Notify BIOS of event - NotifyFatalCohMpCapMismatch ( - CurrentNode, - CurrentLink, - State->SysMpCap, - State->NodesDiscovered, - State - ); - - State->NodesDiscovered = 0; - State->TotalLinks = 0; - - for (NodeToKill = 0; NodeToKill < MAX_NODES; NodeToKill++) { - State->Nb->WriteFullRoutingTable (0, NodeToKill, ROUTE_TO_SELF, ROUTE_TO_SELF, 0, State->Nb); - } - - State->HtInterface->CleanMapsAfterError (State); - - // End Coherent Discovery - Result = FALSE; - } - return Result; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Make all the tests needed to determine if a link should be added to the system data structure. - * - * The link should be added to the system data structure if it is: - * - not being Ignored on this boot - * - not having a hard failure - * - coherent and connected - * - not already in the system data structure - * - not subject to some special handling case. - * . - * - * @param[in] CurrentNode The node we are exploring from - * @param[in] CurrentLink The Link on that node to explore. - * @param[in] State Access to Northbridge interface. - * - * @retval FALSE This link should not be added. - * @retval TRUE This link should explored and added to the system. - */ -BOOLEAN -STATIC -IsLinkToAdd ( - IN UINT8 CurrentNode, - IN UINT8 CurrentLink, - IN STATE_DATA *State - ) -{ - BOOLEAN Linkfound; - UINTN Port; - FINAL_LINK_STATE FinalLinkState; - BOOLEAN Result; - - Result = FALSE; - - FinalLinkState = State->HtInterface->GetIgnoreLink (CurrentNode, CurrentLink, State->Nb->DefaultIgnoreLinkList, State); - if ((FinalLinkState != MATCHED) && (FinalLinkState != POWERED_OFF)) { - if (!State->Nb->ReadTrueLinkFailStatus (CurrentNode, CurrentLink, State, State->Nb)) { - // Make sure that the Link is connected, coherent, and ready - if (State->Nb->VerifyLinkIsCoherent (CurrentNode, CurrentLink, State->Nb)) { - // Test to see if the CurrentLink has already been explored - Linkfound = FALSE; - for (Port = 0; Port < State->TotalLinks; Port++) { - if ((((*State->PortList)[ (Port * 2 + 1)].NodeID == CurrentNode) && - ((*State->PortList)[ (Port * 2 + 1)].Link == CurrentLink)) || - (((*State->PortList)[ (Port * 2)].NodeID == CurrentNode) && - ((*State->PortList)[ (Port * 2)].Link == CurrentLink))) { - Linkfound = TRUE; - break; - } - } - if (!Linkfound) { - if (!State->Nb->HandleSpecialLinkCase (CurrentNode, CurrentLink, State, State->Nb)) { - Result = TRUE; - } - } - } - } - } else { - if (FinalLinkState == POWERED_OFF) { - State->Nb->StopLink (CurrentNode, CurrentLink, State, State->Nb); - } - } - return Result; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Explore for a new node over a link, handling whatever is found. - * - * Open a temporary route over a link on the current node. - * Make checks for compatibility and capability in the proper sequence. - * If the node found is new, set a token to it, so it will be recognized in the - * future, and notify an event for finding a new node. - * If the node is already found (token is set), just return status. - * - * @param[in] CurrentNode The node we are exploring from - * @param[in] CurrentLink The Link on that node to explore. - * @param[in] LogicalProcessor The processor to update in the maps. - * @param[in,out] NewNodeSavedInfo The saved info for nodes in that processor. - * @param[in] State Access to Northbridge interface. - * - * @retval ExploreNodeStatusNew A new node was found - * @retval ExploreNodeStatusGood This is a good link to an already known node - * @retval ExploreNodeStatusStop Stop Coherent Discovery - */ -EXPLORE_NODE_STATUS -STATIC -ExploreNode ( - IN UINT8 CurrentNode, - IN UINT8 CurrentLink, - IN UINT8 LogicalProcessor, - IN OUT NEW_NODE_SAVED_INFO_LIST NewNodeSavedInfo, - IN STATE_DATA *State - ) -{ - UINT8 Token; - EXPLORE_NODE_STATUS Status; - - // Modify CurrentNode's routing table to use CurrentLink to send - // traffic to CurrentNode + 1 - // - State->Nb->WriteRoutingTable (CurrentNode, (CurrentNode + 1), CurrentLink, State->Nb); - if (!State->Nb->HandleSpecialNodeCase ((CurrentNode + 1), CurrentLink, State, State->Nb)) { - if (CheckCompatible (CurrentNode, CurrentLink, State)) { - // Read Token from Current + 1 - Token = State->Nb->ReadToken ((CurrentNode + 1), State->Nb); - ASSERT (Token <= State->NodesDiscovered); - if (Token == 0) { - State->NodesDiscovered++; - ASSERT (State->NodesDiscovered < MAX_NODES); - if (CheckCapable (CurrentNode, CurrentLink, State)) { - Token = State->NodesDiscovered; - State->Nb->WriteToken ((CurrentNode + 1), Token, State->Nb); - // Fill in Saved New Node info for the discovered node. - // We do this so we don't have to keep a temporary route open to it. - // So we save everything that might be needed to set the socket and node - // maps for either the software or hardware method. - // - (*NewNodeSavedInfo)[Token].LogicalProcessor = LogicalProcessor; - (*NewNodeSavedInfo)[Token].CurrentNode = CurrentNode; - (*NewNodeSavedInfo)[Token].CurrentLink = CurrentLink; - (*NewNodeSavedInfo)[Token].PackageLink = State->Nb->GetPackageLink (CurrentNode, CurrentLink, State->Nb); - (*NewNodeSavedInfo)[Token].HardwareSocket = State->Nb->GetSocket (Token, (CurrentNode + 1), State->Nb); - State->Nb->GetModuleInfo ( - CurrentNode, - &((*NewNodeSavedInfo)[Token].CurrentModuleType), - &((*NewNodeSavedInfo)[Token].CurrentModule), - State->Nb - ); - State->Nb->GetModuleInfo ( - (CurrentNode + 1), - &((*NewNodeSavedInfo)[Token].NewModuleType), - &((*NewNodeSavedInfo)[Token].NewModule), - State->Nb - ); - - // Notify BIOS with info - NotifyInfoCohNodeDiscovered ( - CurrentNode, - CurrentLink, - Token, - (CurrentNode + 1), - State - ); - Status = ExploreNodeStatusNew; - } else { - // Failed Capable - Status = ExploreNodeStatusStop; - } - } else { - // Not a new node, token already set - Status = ExploreNodeStatusGood; - } - } else { - // Failed Compatible - Status = ExploreNodeStatusStop; - } - } else { - // Ignore this node - Status = ExploreNodeStatusIgnore; - } - - return Status; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Process all the saved new node info for the current processor. - * - * When all nodes in the processor have been discovered, we can process all the saved - * info about the nodes. We add each node to the socket and node maps. - * - * @param[in] LogicalProcessor The processor to update in the maps. - * @param[in] NewNodeSavedInfo The saved info for nodes in that processor. - * @param[in] State Our system representation. - */ -VOID -STATIC -ProcessSavedNodeInfo ( - IN UINT8 LogicalProcessor, - IN NEW_NODE_SAVED_INFO_LIST NewNodeSavedInfo, - IN STATE_DATA *State - ) -{ - UINT8 NewNode; - UINT8 HardwareSocket; - - // Can't have more processors than nodes, just more (or equal) nodes than processors. - ASSERT (LogicalProcessor <= (State->NodesDiscovered)); - HardwareSocket = 0xFF; - // Find the Hardware Socket value to use (if we are using the hardware socket naming method). - // The new nodes are the ones in this processor, so find the one that is module 0. - for (NewNode = 0; NewNode < (State->NodesDiscovered + 1); NewNode++) { - if (((*NewNodeSavedInfo)[NewNode].LogicalProcessor == LogicalProcessor) && - ((*NewNodeSavedInfo)[NewNode].NewModule == 0)) { - HardwareSocket = (*NewNodeSavedInfo)[NewNode].HardwareSocket; - break; - } - } - // We must have found a result, however, the hardware socket value doesn't have to be correct - // unless we are using the hardware socket naming method. Northbridge code should return the - // node number for the hardware socket if hardware socket strapping is not supported (i.e. no sbi). - ASSERT (HardwareSocket != 0xFF); - - // Set the node to socket maps for this processor. Node zero is always handled specially, - // so skip it in this loop. - for (NewNode = 1; NewNode < (State->NodesDiscovered + 1); NewNode++) { - if ((*NewNodeSavedInfo)[NewNode].LogicalProcessor == LogicalProcessor) { - // For the currently discovered logical processor, update node to socket - // map for all the processor's nodes. - State->HtInterface->SetNodeToSocketMap ( - (*NewNodeSavedInfo)[NewNode].CurrentNode, - (*NewNodeSavedInfo)[NewNode].CurrentModule, - (*NewNodeSavedInfo)[NewNode].PackageLink, - NewNode, - HardwareSocket, - (*NewNodeSavedInfo)[NewNode].NewModule, - State); - } - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Create and add a new link to the system data structure. - * - * Add the two port list data structures, source first, initializing - * the two node ids and the link values. The node id of the remote - * node is its token value. Also, update the adjacency matrix and - * node degree table. - * - * @param[in] CurrentNode The node we are exploring from - * @param[in] CurrentLink The Link on that node to explore. - * @param[in] TempRoute The temporary node route that goes over that link. - * @param[in] State Access to Northbridge interface. - * - */ -VOID -STATIC -AddLinkToSystem ( - IN UINT8 CurrentNode, - IN UINT8 CurrentLink, - IN UINT8 TempRoute, - IN STATE_DATA *State - ) -{ - UINT8 Token; - - ASSERT (State->TotalLinks < MAX_PLATFORM_LINKS); - - Token = State->Nb->ReadToken (TempRoute, State->Nb); - - (*State->PortList)[State->TotalLinks * 2].Type = PORTLIST_TYPE_CPU; - (*State->PortList)[State->TotalLinks * 2].Link = CurrentLink; - (*State->PortList)[State->TotalLinks * 2].NodeID = CurrentNode; - - (*State->PortList)[State->TotalLinks * 2 + 1].Type = PORTLIST_TYPE_CPU; - (*State->PortList)[State->TotalLinks * 2 + 1].Link = State->Nb->ReadDefaultLink (TempRoute, State->Nb); - (*State->PortList)[State->TotalLinks * 2 + 1].NodeID = Token; - - State->TotalLinks++; - - if ( !State->Fabric->SysMatrix[CurrentNode][Token] ) { - State->Fabric->SysDegree[CurrentNode]++; - State->Fabric->SysDegree[Token]++; - State->Fabric->SysMatrix[CurrentNode][Token] = TRUE; - State->Fabric->SysMatrix[Token][CurrentNode] = TRUE; - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Start discovery from a new node. - * - * If the node is not the BSP, establish a route between the node and the - * BSP for request/response. - * Set the node id, and enable routing on this node. This gives us control - * on that node to isolate links, by specifying each link in turn as the route - * to a possible new node. - * - * @param[in] CurrentNode The node we are exploring from - * @param[in] State Access to Northbridge interface. - * - */ -VOID -STATIC -StartFromANewNode ( - IN UINT8 CurrentNode, - IN STATE_DATA *State - ) -{ - if (CurrentNode != 0) { - // Set path from BSP to CurrentNode - routeFromBSP (CurrentNode, CurrentNode, State); - - // Set path from BSP to CurrentNode for CurrentNode + 1 if - // CurrentNode + 1 != MAX_NODES - // - if ((CurrentNode + 1) != MAX_NODES) { - routeFromBSP (CurrentNode, (CurrentNode + 1), State); - } - - // Configure CurrentNode to route traffic to the BSP through its - // default Link - // - State->Nb->WriteRoutingTable (CurrentNode, 0, State->Nb->ReadDefaultLink (CurrentNode, State->Nb), State->Nb); - } - - // Set CurrentNode's NodeID field to CurrentNode - State->Nb->WriteNodeID (CurrentNode, CurrentNode, State->Nb); - - // Enable routing tables on CurrentNode - State->Nb->EnableRoutingTables (CurrentNode, State->Nb); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Back up from exploring a one-deep internal node. - * - * When a newly discovered node has internal package links to another - * node in the same processor, discovery moves to that node to do the - * internal links. Afterwards, this routine provides recovery from that. - * The node needs to respond again using deflnk rather than routing, so - * that connections from other nodes to that one can be identified. - * - * @param[in] CurrentNode The node we are exploring from - * @param[in] State Access to Northbridge interface. - * - */ -VOID -STATIC -BackUpFromANode ( - IN UINT8 CurrentNode, - IN STATE_DATA *State - ) -{ - if (CurrentNode != 0) { - // Disable routing tables on CurrentNode - State->Nb->DisableRoutingTables (CurrentNode, State->Nb); - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Dynamically Discover all coherent devices in the system. - * - * @HtFeatMethod{::F_COHERENT_DISCOVERY} - * - * Initialize some basics like Node IDs and total Nodes found in the - * process. As we go we also build a representation of the discovered - * system which we will use later to program the routing tables. - * During this step, the routing is via default Link back to BSP and - * to each new Node on the Link it was discovered on (no coherency is - * active yet). - * - * In the case of multiple nodes per processor, do a one deep exploration of internal links - * to ensure those node pairs are always numbered n, n + 1. - * - * @param[in,out] State our global state - * - */ -VOID -CoherentDiscovery ( - IN OUT STATE_DATA *State - ) -{ - UINT8 CurrentNode; - UINT8 OneDeepNode; - UINT8 OneDeepLink; - UINT8 CurrentLink; - UINT8 LogicalProcessor; - EXPLORE_NODE_STATUS ExplorationStatus; - LINK_ITERATOR_STATUS LinkIteratorStatus; - NEW_NODE_SAVED_INFO_ITEM NewNodeSavedInfoItems [MAX_NODES]; - NEW_NODE_SAVED_INFO_LIST NewNodeSavedInfo; - - // Initially no info exists for any node, but the BSP is part of logical processor zero. - for (CurrentNode = 0; CurrentNode < MAX_NODES; CurrentNode++) { - NewNodeSavedInfoItems [CurrentNode] = NoInfoSavedYet; - } - NewNodeSavedInfoItems[0].LogicalProcessor = 0; - NewNodeSavedInfoItems[0].HardwareSocket = State->Nb->GetSocket (0, 0, State->Nb); - State->Nb->GetModuleInfo (0, &NewNodeSavedInfoItems[0].NewModuleType, &NewNodeSavedInfoItems[0].NewModule, State->Nb); - NewNodeSavedInfo = (NEW_NODE_SAVED_INFO_LIST) NewNodeSavedInfoItems; - - CurrentNode = 0; - CurrentLink = LINK_ITERATOR_BEGIN; - LogicalProcessor = 0; - // An initial status, for node zero if you will. - ExplorationStatus = ExploreNodeStatusGood; - - // - // Entries are always added in pairs, the even indices are the 'source' - // side closest to the BSP, the odd indices are the 'destination' side - // - - while ((CurrentNode <= State->NodesDiscovered) && (ExplorationStatus != ExploreNodeStatusStop)) { - StartFromANewNode (CurrentNode, State); - - // - // Explore all internal links - // - LinkIteratorStatus = State->Nb->GetNextLink (CurrentNode, &CurrentLink, State->Nb); - - while ((LinkIteratorStatus == LinkIteratorInternal) && - (ExplorationStatus != ExploreNodeStatusStop)) { - if (IsLinkToAdd (CurrentNode, CurrentLink, State)) { - ExplorationStatus = ExploreNode (CurrentNode, CurrentLink, LogicalProcessor, NewNodeSavedInfo, State); - if ((ExplorationStatus == ExploreNodeStatusGood) || - (ExplorationStatus == ExploreNodeStatusNew)) { - AddLinkToSystem (CurrentNode, CurrentLink, (CurrentNode + 1), State); - } - } - LinkIteratorStatus = State->Nb->GetNextLink (CurrentNode, &CurrentLink, State->Nb); - } - if (CurrentNode == 0) { - // The BSP processor is completely discovered now. - ProcessSavedNodeInfo (LogicalProcessor, NewNodeSavedInfo, State); - LogicalProcessor++; - } - - // - // Explore all the external links from this node. - // - - // Starting this iteration using the link that we last got in the iteration above. - while ((LinkIteratorStatus == LinkIteratorExternal) && - (ExplorationStatus != ExploreNodeStatusStop)) { - if (IsLinkToAdd (CurrentNode, CurrentLink, State)) { - ExplorationStatus = ExploreNode (CurrentNode, CurrentLink, LogicalProcessor, NewNodeSavedInfo, State); - if (ExplorationStatus == ExploreNodeStatusNew) { - AddLinkToSystem (CurrentNode, CurrentLink, (CurrentNode + 1), State); - // If this is a new node, we need to explore to its internal mate, if any. - // This allows us to keep internal node pairs as ids n, n+1 - // We use special link and node variables so we can keep our context. - OneDeepLink = 0xFF; - OneDeepNode = State->Nb->ReadToken ((CurrentNode + 1), State->Nb); - StartFromANewNode (OneDeepNode, State); - LinkIteratorStatus = State->Nb->GetNextLink (OneDeepNode, &OneDeepLink, State->Nb); - while ((LinkIteratorStatus == LinkIteratorInternal) && - (ExplorationStatus != ExploreNodeStatusStop)) { - if (IsLinkToAdd (OneDeepNode, OneDeepLink, State)) { - ExplorationStatus = ExploreNode (OneDeepNode, OneDeepLink, LogicalProcessor, NewNodeSavedInfo, State); - if ((ExplorationStatus == ExploreNodeStatusGood) || - (ExplorationStatus == ExploreNodeStatusNew)) { - AddLinkToSystem (OneDeepNode, OneDeepLink, (OneDeepNode + 1), State); - } - } - LinkIteratorStatus = State->Nb->GetNextLink (OneDeepNode, &OneDeepLink, State->Nb); - } - // Since we completed all the node's internal links, we found all the nodes in that processor. - ProcessSavedNodeInfo (LogicalProcessor, NewNodeSavedInfo, State); - LogicalProcessor++; - // Restore node to discoverable state. Otherwise you can't tell what links it is connected on. - BackUpFromANode (OneDeepNode, State); - } else { - if (ExplorationStatus == ExploreNodeStatusGood) { - AddLinkToSystem (CurrentNode, CurrentLink, (CurrentNode + 1), State); - } - } - } - LinkIteratorStatus = State->Nb->GetNextLink (CurrentNode, &CurrentLink, State->Nb); - } - CurrentNode++; - } -} diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatDynamicDiscovery.h b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatDynamicDiscovery.h deleted file mode 100644 index 4096c3fe2e..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatDynamicDiscovery.h +++ /dev/null @@ -1,79 +0,0 @@ -/** - * @file - * - * Coherent Discovery Interface. - * - * Contains interface to the coherent discovery feature. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - -#ifndef _HT_FEAT_DYNAMIC_DISCOVERY_H_ -#define _HT_FEAT_DYNAMIC_DISCOVERY_H_ - -/*---------------------------------------------------------------------------- - * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) - * - *---------------------------------------------------------------------------- - */ - -/*----------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *----------------------------------------------------------------------------- - */ - - -/*---------------------------------------------------------------------------- - * FUNCTIONS PROTOTYPE - * - *---------------------------------------------------------------------------- - */ - -/** - * Dynamically Discover all coherent devices in the system. - * - */ -VOID -CoherentDiscovery ( - IN OUT STATE_DATA *State - ); - -#endif /* _HT_FEAT_DYNAMIC_DISCOVERY_H_ */ - - diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatGanging.c b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatGanging.c deleted file mode 100644 index 6095298018..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatGanging.c +++ /dev/null @@ -1,215 +0,0 @@ -/** - * @file - * - * Routines for re-ganging Links. - * - * Implement the reganging feature. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "Topology.h" -#include "htFeat.h" -#include "htInterface.h" -#include "htNb.h" -#include "htFeatGanging.h" -#include "Filecode.h" -#define FILECODE PROC_HT_FEATURES_HTFEATGANGING_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*************************************************************************** - *** Link Optimization *** - ***************************************************************************/ - -/*----------------------------------------------------------------------------------------*/ -/** - * Test the subLinks of a Link to see if they qualify to be reganged. - * - * @HtFeatMethod{::F_REGANG_LINKS} - * - * If they do, update the port list data to indicate that this should be done. - * @note no actual hardware state is changed in this routine. - * - * @param[in,out] State Our global state - */ -VOID -RegangLinks ( - IN OUT STATE_DATA *State - ) -{ - FINAL_LINK_STATE FinalLinkState; - UINT8 i; - UINT8 j; - for (i = 0; i < (State->TotalLinks * 2); i += 2) { - // Data validation - ASSERT ((*State->PortList)[i].Type < 2 && (*State->PortList)[i].Link < State->Nb->MaxLinks); - ASSERT ((*State->PortList)[i + 1].Type < 2 && (*State->PortList)[i + 1].Link < State->Nb->MaxLinks); - - // Regang is false unless we pass all conditions below - (*State->PortList)[i].SelRegang = FALSE; - (*State->PortList)[i + 1].SelRegang = FALSE; - - // Only process cpu to cpu Links - if ( ((*State->PortList)[i].Type != PORTLIST_TYPE_CPU) || - ((*State->PortList)[i + 1].Type != PORTLIST_TYPE_CPU)) { - continue; - } - - for (j = i + 2; j < State->TotalLinks*2; j += 2) { - // Only process cpu to cpu Links - if ( ((*State->PortList)[j].Type != PORTLIST_TYPE_CPU) || - ((*State->PortList)[j + 1].Type != PORTLIST_TYPE_CPU) ) { - continue; - } - - // Links must be from the same source - if ((*State->PortList)[i].NodeID != (*State->PortList)[j].NodeID) { - continue; - } - - // Link must be to the same target - if ((*State->PortList)[i + 1].NodeID != (*State->PortList)[j + 1].NodeID) { - continue; - } - - // Ensure same source base port - if (((*State->PortList)[i].Link & 3) != ((*State->PortList)[j].Link & 3)) { - continue; - } - - // Ensure same destination base port - if (((*State->PortList)[i + 1].Link & 3) != ((*State->PortList)[j + 1].Link & 3)) { - continue; - } - - // Ensure subLink0 routes to subLink0 - if (((*State->PortList)[i].Link & 4) != ((*State->PortList)[i + 1].Link & 4)) { - continue; - } - - // (therefore subLink1 routes to subLink1) - ASSERT (((*State->PortList)[j].Link & 4) == ((*State->PortList)[j + 1].Link & 4)); - - FinalLinkState = State->HtInterface->GetSkipRegang ((*State->PortList)[i].NodeID, - (*State->PortList)[i].Link & 0x03, - (*State->PortList)[i + 1].NodeID, - (*State->PortList)[i + 1].Link & 0x03, - State); - if (FinalLinkState == MATCHED) { - continue; - } else if (FinalLinkState == POWERED_OFF) { - // StopLink will be done on the sublink 1, thus OR in 4 to the link to ensure it. - State->Nb->StopLink ((*State->PortList)[i].NodeID, ((*State->PortList)[i].Link | 4), State, State->Nb); - State->Nb->StopLink ((*State->PortList)[i + 1].NodeID, ((*State->PortList)[i + 1].Link | 4), State, State->Nb); - } - - // - // Create a ganged portlist entry for the two regang-able subLinks. - // - // All info will be that of subLink zero. - // (If Link discovery order was other than ascending, fix the .Pointer field too.) - // - // - if (((*State->PortList)[i].Link & 4) != 0) { - (*State->PortList)[i].Pointer = (*State->PortList)[j].Pointer; - (*State->PortList)[i + 1].Pointer = (*State->PortList)[j + 1].Pointer; - } - (*State->PortList)[i].Link &= 0x03; // Force to point to subLink0 - (*State->PortList)[i + 1].Link &= 0x03; - // If powered off, sublink 1 is removed but the link is still 8 bits. - if (FinalLinkState != POWERED_OFF) { - (*State->PortList)[i].SelRegang = TRUE; // Enable Link reganging - (*State->PortList)[i + 1].SelRegang = TRUE; - (*State->PortList)[i].PrvWidthOutCap = HT_WIDTH_16_BITS; - (*State->PortList)[i + 1].PrvWidthOutCap = HT_WIDTH_16_BITS; - (*State->PortList)[i].PrvWidthInCap = HT_WIDTH_16_BITS; - (*State->PortList)[i + 1].PrvWidthInCap = HT_WIDTH_16_BITS; - } - - // Delete PortList[j, j + 1], slow but easy to debug implementation - State->TotalLinks--; - LibAmdMemCopy (&((*State->PortList)[j]), - &((*State->PortList)[j + 2]), - sizeof (PORT_DESCRIPTOR)*(State->TotalLinks* 2 - j), - State->ConfigHandle); - LibAmdMemFill (&((*State->PortList)[State->TotalLinks * 2]), INVALID_LINK, (sizeof (PORT_DESCRIPTOR) * 2), State->ConfigHandle); - - break; // Exit loop, advance to PortList[i + 2] - } - } -} diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatGanging.h b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatGanging.h deleted file mode 100644 index 4511214f7d..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatGanging.h +++ /dev/null @@ -1,80 +0,0 @@ -/** - * @file - * - * Link Reganging Interface. - * - * Contains interface to the Reganging feature. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* - *----------------------------------------------------------------------------- - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#ifndef _HT_FEAT_GANGING_H_ -#define _HT_FEAT_GANGING_H_ - -/*---------------------------------------------------------------------------- - * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) - * - *---------------------------------------------------------------------------- - */ - -/*----------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *----------------------------------------------------------------------------- - */ - - -/*---------------------------------------------------------------------------- - * FUNCTIONS PROTOTYPE - * - *---------------------------------------------------------------------------- - */ - -/** - * Test the subLinks of a Link to see if they qualify to be reganged. - * - */ -VOID -RegangLinks ( - IN OUT STATE_DATA *State - ); - -#endif /* _HT_FEAT_GANGING_H_ */ - - diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatNoncoherent.c b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatNoncoherent.c deleted file mode 100644 index 35f717ab07..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatNoncoherent.c +++ /dev/null @@ -1,313 +0,0 @@ -/** - * @file - * - * Non-Coherent Discovery Routines. - * - * Contains routines for enumerating and initializing non-coherent devices. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "Topology.h" -#include "htFeat.h" -#include "htInterface.h" -#include "htNotify.h" -#include "htNb.h" -#include "htFeatNoncoherent.h" -#include "htFeatOptimization.h" -#include "Filecode.h" -#define FILECODE PROC_HT_FEATURES_HTFEATNONCOHERENT_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*************************************************************************** - *** Non-coherent init code *** - *** Algorithms *** - ***************************************************************************/ -/*----------------------------------------------------------------------------------------*/ -/** - * Process a non-coherent Link. - * - * @HtFeatMethod{::F_PROCESS_LINK} - * - * Enable a range of bus numbers, and set the device ID for all devices found. Add - * non-coherent devices, links to the system data structure. - * - * @param[in] Node Node on which to process nc init - * @param[in] Link The non-coherent Link on that Node - * @param[in] IsCompatChain Is this the chain with the southbridge? TRUE if yes. - * @param[in,out] State our global state - */ -VOID -ProcessLink ( - IN UINT8 Node, - IN UINT8 Link, - IN BOOLEAN IsCompatChain, - IN OUT STATE_DATA *State - ) -{ - UINT8 SecBus; - UINT8 SubBus; - UINT32 CurrentBuid; - UINT32 Temp; - UINT32 UnitIdCount; - PCI_ADDR CurrentPtr; - UINT8 Depth; - BUID_SWAP_LIST *SwapPtr; - UINT8 LastLink; - - ASSERT ((Node < MAX_NODES) && (Link < State->Nb->MaxLinks)); - - if (!State->HtInterface->GetOverrideBusNumbers (Node, Link, &SecBus, &SubBus, State)) { - // Assign Bus numbers - if (State->AutoBusCurrent >= State->HtBlock->AutoBusMax) { - // If we run out of Bus Numbers, notify and skip this chain - // - IDS_ERROR_TRAP; - NotifyErrorNcohBusMaxExceed (Node, Link, State->AutoBusCurrent, State); - return; - } - - if (State->UsedCfgMapEntries >= 4) { - // If we have used all the PCI Config maps we can't add another chain. - // Notify and if call back is unimplemented or returns, skip this chain. - // - IDS_ERROR_TRAP; - NotifyErrorNcohCfgMapExceed (Node, Link, State); - return; - } - - SecBus = State->AutoBusCurrent; - SubBus = SecBus + State->HtBlock->AutoBusIncrement - 1; - State->AutoBusCurrent = State->AutoBusCurrent + State->HtBlock->AutoBusIncrement; - } - - State->Nb->SetConfigAddrMap (State->UsedCfgMapEntries, SecBus, SubBus, Node, Link, State, State->Nb); - State->UsedCfgMapEntries++; - - if (State->HtInterface->GetManualBuidSwapList (Node, Link, &SwapPtr, State)) { - // Manual non-coherent BUID assignment - AGESA_TESTPOINT (TpProcHtManualNc, State->ConfigHandle); - - - if (!IsCompatChain || !State->IsUsingRecoveryHt) { - // If this is the not southbridge chain or Recovery HT was not used - // then we need to assign BUIDs here. - // - Depth = 0; - // Assign BUID's per manual override - while (SwapPtr->Swaps[Depth].FromId != 0xFF) { - CurrentPtr.AddressValue = MAKE_SBDFO (0, SecBus, SwapPtr->Swaps[Depth].FromId, 0, 0); - if (DoesDeviceHaveHtSubtypeCap (CurrentPtr, HT_SLAVE_CAPABILITY, &CurrentPtr, State)) { - // Set the device's BUID field [20:16] to the current buid - CurrentBuid = SwapPtr->Swaps[Depth].ToId; - LibAmdPciWriteBits (CurrentPtr, 20, 16, &CurrentBuid, State->ConfigHandle); - Depth++; - } else { - // All non-coherent devices must have a slave interface capability. - ASSERT (FALSE); - break; - } - } - } - - // Build chain of devices. Do this even if Recovery HT assign BUIDs for this chain. - Depth = 0; - while (SwapPtr->FinalIds[Depth] != 0xFF) { - ASSERT (State->TotalLinks < MAX_PLATFORM_LINKS); - (*State->PortList)[(State->TotalLinks * 2)].NodeID = Node; - // Note: depth == 0 is true before depth > 0. This makes LastLink variable work. - if (Depth == 0) { - (*State->PortList)[(State->TotalLinks * 2)].Type = PORTLIST_TYPE_CPU; - (*State->PortList)[(State->TotalLinks * 2)].Link = Link; - } else { - // Fill in the host side port. Link and base pointer can be deduced from the upstream link's - // downstream port. - (*State->PortList)[(State->TotalLinks * 2)].Type = PORTLIST_TYPE_IO; - (*State->PortList)[(State->TotalLinks * 2)].Link = 1 - (*State->PortList)[(((State->TotalLinks - 1) * 2) + 1)].Link; - (*State->PortList)[(State->TotalLinks * 2)].HostLink = Link; - (*State->PortList)[(State->TotalLinks * 2)].HostDepth = Depth - 1; - (*State->PortList)[(State->TotalLinks * 2)].Pointer = (*State->PortList)[(((State->TotalLinks - 1) * 2) + 1)].Pointer; - } - - (*State->PortList)[(State->TotalLinks * 2) + 1].Type = PORTLIST_TYPE_IO; - (*State->PortList)[(State->TotalLinks * 2) + 1].NodeID = Node; - (*State->PortList)[(State->TotalLinks * 2) + 1].HostLink = Link; - (*State->PortList)[(State->TotalLinks * 2) + 1].HostDepth = Depth; - - CurrentPtr.AddressValue = MAKE_SBDFO (0, SecBus, (SwapPtr->FinalIds[Depth] & 0x3F), 0, 0); - if (DoesDeviceHaveHtSubtypeCap (CurrentPtr, HT_SLAVE_CAPABILITY, &CurrentPtr, State)) { - (*State->PortList)[(State->TotalLinks * 2) + 1].Pointer = CurrentPtr; - } else { - // All non-coherent devices must have a slave interface capability. - ASSERT (FALSE); - break; - } - - // Bit 6 indicates whether orientation override is desired. - // Bit 7 indicates the upstream Link if overriding. - // - // assert catches at least the one known incorrect setting, that a non-zero link - // is specified, but override desired is not set. - ASSERT (((SwapPtr->FinalIds[Depth] & 0x40) != 0) || ((SwapPtr->FinalIds[Depth] & 0x80) == 0)); - if ((SwapPtr->FinalIds[Depth] & 0x40) != 0) { - // Override the device's orientation - LastLink = SwapPtr->FinalIds[Depth] >> 7; - } else { - // Detect the device's orientation, by reading the Master Host bit [26] - LibAmdPciReadBits (CurrentPtr, 26, 26, &Temp, State->ConfigHandle); - LastLink = (UINT8)Temp; - } - (*State->PortList)[(State->TotalLinks * 2) + 1].Link = LastLink; - - Depth++; - State->TotalLinks++; - } - } else { - // Automatic non-coherent device detection - AGESA_TESTPOINT (TpProcHtAutoNc, State->ConfigHandle); - Depth = 0; - CurrentBuid = 1; - for (; ; ) { - CurrentPtr.AddressValue = MAKE_SBDFO (0, SecBus, 0, 0, 0); - - LibAmdPciRead (AccessWidth32, CurrentPtr, &Temp, State->ConfigHandle); - if (Temp == ((UINT32)0xFFFFFFFF)) { - // No device found at CurrentPtr - break; - } - - ASSERT (State->TotalLinks < MAX_PLATFORM_LINKS); - - (*State->PortList)[(State->TotalLinks * 2)].NodeID = Node; - if (Depth == 0) { - (*State->PortList)[(State->TotalLinks * 2)].Type = PORTLIST_TYPE_CPU; - (*State->PortList)[(State->TotalLinks * 2)].Link = Link; - } else { - // Fill in the host side port. Link and base pointer can be deduced from the upstream link's - // downstream port. - (*State->PortList)[(State->TotalLinks * 2)].Type = PORTLIST_TYPE_IO; - (*State->PortList)[(State->TotalLinks * 2)].Link = 1 - (*State->PortList)[((State->TotalLinks - 1) * 2) + 1].Link; - (*State->PortList)[(State->TotalLinks * 2)].HostLink = Link; - (*State->PortList)[(State->TotalLinks * 2)].HostDepth = Depth - 1; - (*State->PortList)[(State->TotalLinks * 2)].Pointer = (*State->PortList)[((State->TotalLinks - 1) * 2) + 1].Pointer; - } - - (*State->PortList)[(State->TotalLinks * 2) + 1].Type = PORTLIST_TYPE_IO; - (*State->PortList)[(State->TotalLinks * 2) + 1].NodeID = Node; - (*State->PortList)[(State->TotalLinks * 2) + 1].HostLink = Link; - (*State->PortList)[(State->TotalLinks * 2) + 1].HostDepth = Depth; - - if (DoesDeviceHaveHtSubtypeCap (CurrentPtr, HT_SLAVE_CAPABILITY, &CurrentPtr, State)) { - - // Get device's unit id count [25:21] - LibAmdPciReadBits (CurrentPtr, 25, 21, &UnitIdCount, State->ConfigHandle); - if (((UnitIdCount + CurrentBuid) > MAX_BUID) || ((SecBus == 0) && ((UnitIdCount + CurrentBuid) > 24))) { - // An error handler for the case where we run out of BUID's on a chain - NotifyErrorNcohBuidExceed (Node, Link, Depth, (UINT8)CurrentBuid, (UINT8)UnitIdCount, State); - IDS_ERROR_TRAP; - break; - } - LibAmdPciWriteBits (CurrentPtr, 20, 16, &CurrentBuid, State->ConfigHandle); - - CurrentPtr.Address.Device = CurrentBuid; - LibAmdPciReadBits (CurrentPtr, 20, 16, &Temp, State->ConfigHandle); - if (Temp != CurrentBuid) { - // An error handler for this error, - // this often occurs in new BIOS ports and it means you need to use a Manual BUID Swap List. - NotifyErrorNcohDeviceFailed (Node, Link, Depth, (UINT8)CurrentBuid, State); - IDS_ERROR_TRAP; - break; - } - - LibAmdPciReadBits (CurrentPtr, 26, 26, &Temp, State->ConfigHandle); - (*State->PortList)[(State->TotalLinks * 2) + 1].Link = (UINT8)Temp; - (*State->PortList)[(State->TotalLinks * 2) + 1].Pointer = CurrentPtr; - - Depth++; - State->TotalLinks++; - CurrentBuid += UnitIdCount; - } else { - // All non-coherent devices must have a slave interface capability. - ASSERT (FALSE); - break; - } - } - // Provide information on automatic device results - NotifyInfoNcohAutoDepth (Node, Link, (Depth - 1), State); - } -} diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatNoncoherent.h b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatNoncoherent.h deleted file mode 100644 index 51d452f8ad..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatNoncoherent.h +++ /dev/null @@ -1,80 +0,0 @@ -/** - * @file - * - * Non-Coherent Discovery Interface. - * - * Contains interface to the Non-Coherent Link processing feature. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#ifndef _HT_FEAT_NONCOHERENT_H_ -#define _HT_FEAT_NONCOHERENT_H_ - -/*---------------------------------------------------------------------------- - * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) - * - *---------------------------------------------------------------------------- - */ - -/*----------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *----------------------------------------------------------------------------- - */ - - -/*---------------------------------------------------------------------------- - * FUNCTIONS PROTOTYPE - * - *---------------------------------------------------------------------------- - */ - -/** - * Process a non-coherent Link. - * - */ -VOID -ProcessLink ( - IN UINT8 Node, - IN UINT8 Link, - IN BOOLEAN IsCompatChain, - IN OUT STATE_DATA *State - ); - -#endif /* _HT_FEAT_NONCOHERENT_H_ */ diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatOptimization.c b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatOptimization.c deleted file mode 100644 index 8353316867..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatOptimization.c +++ /dev/null @@ -1,886 +0,0 @@ -/** - * @file - * - * Link Optimization Routines. - * - * Contains routines for determining width, frequency, and other - * Link features - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "Topology.h" -#include "htFeat.h" -#include "IdsHt.h" -#include "htInterface.h" -#include "htNb.h" -#include "htFeatOptimization.h" -#include "htNotify.h" -#include "Filecode.h" -#define FILECODE PROC_HT_FEATURES_HTFEATOPTIMIZATION_FILECODE - -extern CONST PF_HtIdsGetPortOverride ROMDATA pf_HtIdsGetPortOverride; - -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ -#define PCI_CONFIG_COMMAND_REG04 4 -#define PCI_CONFIG_REVISION_REG08 8 - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*************************************************************************** - *** Link Optimization *** - ***************************************************************************/ - -/*----------------------------------------------------------------------------------------*/ -/** - * Given the bits set in the register field, return the width it represents. - * - * As invalid width values or encodings are rare except during debug, catch those using - * ASSERT(). This means theoretically we are returning an incorrect result if that - * happens. The default chosen for the result is arbitrarily 8 bits. This is likely - * not to be the actual correct width and may cause a crash, hang, or incorrect operation. - * Hardware often ignores writes of invalid width encodings. - * - * @note This routine is used for CPUs as well as IO devices, as all comply to the - * "HyperTransport I/O Link Specification ". - * - * @param[in] Value The bits for the register - * - * @return The width - */ -UINT8 -STATIC -ConvertBitsToWidth ( - IN UINT8 Value - ) -{ - UINT8 Result; - - Result = 0; - - switch (Value) { - - case 1: - Result = 16; - break; - - case 0: - Result = 8; - break; - - case 3: - Result = 32; - break; - - case 5: - Result = 4; - break; - - case 4: - Result = 2; - break; - - default: - ASSERT (FALSE); - } - return Result; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Translate a desired width setting to the bits to set in the register field. - * - * As invalid width values or encodings are rare except during debug, catch those using - * ASSERT(). This means theoretically we are returning an incorrect result if that - * happens. The default chosen for the result is arbitrarily 8 bits. This is likely - * not to be the actual correct width and may cause a crash, hang, or incorrect operation. - * Hardware often ignores writes of invalid width encodings. - * - * @note This routine is used for CPUs as well as IO devices, as all comply to the - * "HyperTransport I/O Link Specification ". - * - * @param[in] Value the width Value - * - * @return The bits for the register - */ -UINT8 -ConvertWidthToBits ( - IN UINT8 Value - ) -{ - UINT8 Result; - - Result = 8; - - switch (Value) { - - case 16: - Result = 1; - break; - - case 8: - Result = 0; - break; - - case 32: - Result = 3; - break; - - case 4: - Result = 5; - break; - - case 2: - Result = 4; - break; - - default: - ASSERT (FALSE); - } - return Result; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Access HT Link Control Register. - * - * @HtFeatMethod{::F_SET_HT_CONTROL_REGISTER_BITS} - * - * Provide a common routine for accessing the HT Link Control registers (84, a4, c4, - * e4), to enforce not clearing the HT CRC error bits. Replaces direct use of - * AmdPCIWriteBits(). - * - * @note: This routine is called for CPUs as well as IO Devices! All comply to the - * "HyperTransport I/O Link Specification ". - * - * @param[in] Reg the PCI config address the control register - * @param[in] HiBit the high bit number - * @param[in] LoBit the low bit number - * @param[in] Value the value to write to that bit range. Bit 0 => loBit. - * @param[in] State Our state, config handle for lib - */ -VOID -SetHtControlRegisterBits ( - IN PCI_ADDR Reg, - IN UINT8 HiBit, - IN UINT8 LoBit, - IN UINT32 *Value, - IN STATE_DATA *State - ) -{ - UINT32 Temp; - UINT32 mask; - - ASSERT ((HiBit < 32) && (LoBit < 32) && (HiBit >= LoBit) && ((Reg.AddressValue & 0x3) == 0)); - ASSERT ((HiBit < 8) || (LoBit > 9)); - - // A 1 << 32 == 1 << 0 due to x86 SHL instruction, so skip if that is the case - if ((HiBit - LoBit) != 31) { - mask = (((UINT32)1 << (HiBit - LoBit + 1)) - 1); - } else { - mask = (UINT32)0xFFFFFFFF; - } - - LibAmdPciRead (AccessWidth32, Reg, &Temp, State->ConfigHandle); - Temp &= ~(mask << LoBit); - Temp |= (*Value & mask) << LoBit; - Temp &= (UINT32)HT_CONTROL_CLEAR_CRC; - LibAmdPciWrite (AccessWidth32, Reg, &Temp, State->ConfigHandle); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Set HT Frequency register for IO Devices - * - * Provide a common routine for accessing the HT Link Frequency registers at offset 8 - * and 0x10, to enforce not clearing the HT Link error bits. Replaces direct use of - * AmdPCIWriteBits(). - * - * @note This routine is called for IO Devices only!! All comply to the - * "HyperTransport I/O Link Specification ". - * - * @param[in] Reg the PCI config address the control register - * @param[in] Hibit the high bit number - * @param[in] Lobit the low bit number - * @param[in] Value the value to write to that bit range. Bit 0 => loBit. - * @param[in] State Our state, config handle for lib - */ -VOID -STATIC -SetHtIoFrequencyRegisterBits ( - IN PCI_ADDR Reg, - IN UINT8 Hibit, - IN UINT8 Lobit, - IN UINT32 *Value, - IN STATE_DATA *State - ) -{ - UINT32 Mask; - UINT32 Temp; - - ASSERT ((Hibit < 32) && (Lobit < 32) && (Hibit >= Lobit) && ((Reg.AddressValue & 0x3) == 0)); - ASSERT ((Hibit < 12) || (Lobit > 14)); - - // A 1<<32 == 1<<0 due to x86 SHL instruction, so skip if that is the case - if ((Hibit - Lobit) != 31) { - Mask = (((UINT32)1 << ((Hibit - Lobit) + 1)) - 1); - } else { - Mask = (UINT32)0xFFFFFFFF; - } - - LibAmdPciRead (AccessWidth32, Reg, &Temp, State->ConfigHandle); - Temp &= ~(Mask << Lobit); - Temp |= (*Value & Mask) << Lobit; - Temp &= (UINT32)HT_FREQUENCY_CLEAR_LINK_ERRORS; - LibAmdPciWrite (AccessWidth32, Reg, &Temp, State->ConfigHandle); -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Get Link features into system data structure. - * - * @HtFeatMethod{::F_GATHER_LINK_DATA} - * - * For all discovered Links, populate the port list with the frequency and width - * capabilities. Gather support data for: - * - Unit ID Clumping - * - * @param[in] State our global state, port list - */ -VOID -GatherLinkData ( - IN STATE_DATA *State - ) -{ - UINT8 i; - PCI_ADDR LinkBase; - PCI_ADDR Reg; - UINT32 Bits; - UINT8 Revision; - - // Get the capability base for whatever device type the link port is on - for (i = 0; i < (State->TotalLinks * 2); i++) { - if ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) { - LinkBase = State->Nb->MakeLinkBase ((*State->PortList)[i].NodeID, (*State->PortList)[i].Link, State->Nb); - (*State->PortList)[i].Pointer = LinkBase; - } else { - LinkBase = (*State->PortList)[i].Pointer; - if ((*State->PortList)[i].Link == 1) { - LinkBase.Address.Register += HTSLAVE_LINK01_OFFSET; - } - } - - // Getting the Width is standard across device types - Reg = LinkBase; - Reg.Address.Register += HTSLAVE_LINK_CONTROL_0_REG; - LibAmdPciReadBits (Reg, 22, 20, &Bits, State->ConfigHandle); - (*State->PortList)[i].PrvWidthOutCap = ConvertBitsToWidth ((UINT8)Bits); - - LibAmdPciReadBits (Reg, 18, 16, &Bits, State->ConfigHandle); - (*State->PortList)[i].PrvWidthInCap = ConvertBitsToWidth ((UINT8)Bits); - - // Get Frequency and other device type specific features - if ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) { - State->Nb->GatherLinkFeatures (&(*State->PortList)[i], State->HtInterface, State->Nb); - } else { - Reg = LinkBase; - Reg.Address.Register += HTSLAVE_FREQ_REV_0_REG; - LibAmdPciReadBits (Reg, 31, 16, &Bits, State->ConfigHandle); - (*State->PortList)[i].PrvFrequencyCap = Bits; - - // Unit ID Clumping Support - if (State->IsUsingUnitIdClumping) { - if (DoesDeviceHaveHtSubtypeCap (LinkBase, HT_UNITID_CAPABILITY, &Reg, State)) { - Reg.Address.Register += HTUNIT_SUPPORT_REG; - LibAmdPciReadBits (Reg, 31, 0, &Bits, State->ConfigHandle); - } else { - // Not there, that's ok, we don't know that it should have one. - // Check for Passive support. (Bit 0 won't be set if full support is implemented, - // so we can use it to indicate passive support in our portlist struct). - Reg = LinkBase; - Reg.Address.Register += HTSLAVE_FEATURECAP_REG; - Bits = 1; - LibAmdPciWriteBits (Reg, 5, 5, &Bits, State->ConfigHandle); - LibAmdPciReadBits (Reg, 5, 5, &Bits, State->ConfigHandle); - } - (*State->PortList)[i].ClumpingSupport = Bits; - } else { - (*State->PortList)[i].ClumpingSupport = HT_CLUMPING_DISABLE; - } - - Reg = LinkBase; - Reg.Address.Register = PCI_CONFIG_REVISION_REG08; - LibAmdPciReadBits ( LinkBase, 7, 0, &Bits, State->ConfigHandle); - Revision = (UINT8) Bits; - - LinkBase.Address.Register = 0; - LibAmdPciRead (AccessWidth32, LinkBase, &Bits, State->ConfigHandle); - - State->HtInterface->GetDeviceCapOverride ((*State->PortList)[i].NodeID, - (*State->PortList)[i].HostLink, - (*State->PortList)[i].HostDepth, - (*State->PortList)[i].Pointer, - Bits, - Revision, - (*State->PortList)[i].Link, - &((*State->PortList)[i].PrvWidthInCap), - &((*State->PortList)[i].PrvWidthOutCap), - &((*State->PortList)[i].PrvFrequencyCap), - &((*State->PortList)[i].ClumpingSupport), - State); - } - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Optimize Links. - * - * @HtFeatMethod{::F_SELECT_OPTIMAL_WIDTH_AND_FREQUENCY} - * - * For all Links: - * Examine both sides of a Link and determine the optimal frequency and width, - * taking into account externally provided limits and enforcing any other limit - * or matching rules as applicable except subLink balancing. Update the port - * list data with the optimal settings. - * - * @note no hardware state changes in this routine. - * - * @param[in,out] State Process and update portlist - */ -VOID -SelectOptimalWidthAndFrequency ( - IN OUT STATE_DATA *State - ) -{ - UINT8 i; - UINT8 j; - UINT8 Freq; - UINT32 Temp; - UINT32 CbPcbFreqLimit; - UINT8 CbPcbABDownstreamWidth; - UINT8 CbPcbBAUpstreamWidth; - - for (i = 0; i < (State->TotalLinks * 2); i += 2) { - CbPcbFreqLimit = HT_FREQUENCY_NO_LIMIT; - CbPcbABDownstreamWidth = HT_WIDTH_16_BITS; - CbPcbBAUpstreamWidth = HT_WIDTH_16_BITS; - - if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) && ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_CPU)) { - State->HtInterface->GetCpu2CpuPcbLimits ((*State->PortList)[i].NodeID, - (*State->PortList)[i].Link, - (*State->PortList)[i + 1].NodeID, - (*State->PortList)[i + 1].Link, - &CbPcbABDownstreamWidth, - &CbPcbBAUpstreamWidth, - &CbPcbFreqLimit, - State - ); - } else { - State->HtInterface->GetIoPcbLimits ((*State->PortList)[i + 1].NodeID, - (*State->PortList)[i + 1].HostLink, - (*State->PortList)[i + 1].HostDepth, - &CbPcbABDownstreamWidth, - &CbPcbBAUpstreamWidth, - &CbPcbFreqLimit, - State - ); - } - - Temp = (*State->PortList)[i].PrvFrequencyCap; - Temp &= (*State->PortList)[i + 1].PrvFrequencyCap; - Temp &= CbPcbFreqLimit; - (*State->PortList)[i].CompositeFrequencyCap = (UINT32)Temp; - (*State->PortList)[i + 1].CompositeFrequencyCap = (UINT32)Temp; - - ASSERT (Temp != 0); - Freq = LibAmdBitScanReverse (Temp); - (*State->PortList)[i].SelFrequency = Freq; - (*State->PortList)[i + 1].SelFrequency = Freq; - - Temp = (*State->PortList)[i].PrvWidthOutCap; - if ((*State->PortList)[i + 1].PrvWidthInCap < Temp) { - Temp = (*State->PortList)[i + 1].PrvWidthInCap; - } - if (CbPcbABDownstreamWidth < Temp) { - Temp = CbPcbABDownstreamWidth; - } - (*State->PortList)[i].SelWidthOut = (UINT8)Temp; - (*State->PortList)[i + 1].SelWidthIn = (UINT8)Temp; - - Temp = (*State->PortList)[i].PrvWidthInCap; - if ((*State->PortList)[i + 1].PrvWidthOutCap < Temp) { - Temp = (*State->PortList)[i + 1].PrvWidthOutCap; - } - if (CbPcbBAUpstreamWidth < Temp) { - Temp = CbPcbBAUpstreamWidth; - } - (*State->PortList)[i].SelWidthIn = (UINT8)Temp; - (*State->PortList)[i + 1].SelWidthOut = (UINT8)Temp; - } - // Calculate unit id clumping - // - // Find the root of each IO Chain, process the chain for clumping support. - // The root is always the first link of the chain in the port list. - // Clumping is not device link specific, so we can just look at the upstream ports (j+1). Use ASSERTs to sanity - // check the downstream ports (j). If any device on the chain does not support clumping, the entire chain will be - // disabled for clumping. - // After analyzing the clumping support on the chain the CPU's portlist has the enable mask. Update all the - // IO Devices on the chain with the enable mask. If any device's only have passive support, that is already enabled. - // - if (State->IsUsingUnitIdClumping) { - for (i = 0; i < (State->TotalLinks * 2); i += 2) { - if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) && ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_IO)) { - (*State->PortList)[i].ClumpingSupport = HT_CLUMPING_DISABLE; - if ((*State->PortList)[i + 1].ClumpingSupport != HT_CLUMPING_DISABLE) { - (*State->PortList)[i].ClumpingSupport |= (*State->PortList)[i + 1].ClumpingSupport; - for (j = i + 2; j < (State->TotalLinks * 2); j += 2) { - if (((*State->PortList)[j].Type == PORTLIST_TYPE_IO) && ((*State->PortList)[j + 1].Type == PORTLIST_TYPE_IO)) { - if (((*State->PortList)[i].NodeID == (*State->PortList)[j + 1].NodeID) && - ((*State->PortList)[i].Link == (*State->PortList)[j + 1].HostLink)) { - ASSERT (((*State->PortList)[i].NodeID == (*State->PortList)[j + 1].NodeID) && - ((*State->PortList)[i].Link == (*State->PortList)[j].HostLink)); - if ((*State->PortList)[j + 1].ClumpingSupport != HT_CLUMPING_DISABLE) { - ASSERT ((((*State->PortList)[j + 1].ClumpingSupport & HT_CLUMPING_PASSIVE) == 0) || - (((*State->PortList)[j + 1].ClumpingSupport & ~(HT_CLUMPING_PASSIVE)) == 0)); - (*State->PortList)[i].ClumpingSupport |= (*State->PortList)[j + 1].ClumpingSupport; - } else { - (*State->PortList)[i].ClumpingSupport = HT_CLUMPING_DISABLE; - break; - } - } - } - } - if ((*State->PortList)[i + 1].ClumpingSupport != HT_CLUMPING_PASSIVE) { - (*State->PortList)[i + 1].ClumpingSupport = (*State->PortList)[i].ClumpingSupport; - } - for (j = i + 2; j < (State->TotalLinks * 2); j += 2) { - if (((*State->PortList)[j].Type == PORTLIST_TYPE_IO) && ((*State->PortList)[j + 1].Type == PORTLIST_TYPE_IO)) { - if (((*State->PortList)[i].NodeID == (*State->PortList)[j + 1].NodeID) && - ((*State->PortList)[i].Link == (*State->PortList)[j + 1].HostLink)) { - if ((*State->PortList)[j + 1].ClumpingSupport != HT_CLUMPING_PASSIVE) { - (*State->PortList)[j + 1].ClumpingSupport = (*State->PortList)[i].ClumpingSupport; - // The downstream isn't really passive, just mark it so in order to write the device only once. - (*State->PortList)[j].ClumpingSupport = HT_CLUMPING_PASSIVE; - } - } - } - } - } - } - } - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Change the hardware state for all Links according to the now optimized data in the - * port list data structure. - * - * @HtFeatMethod{::F_SET_LINK_DATA} - * - * @param[in] State our global state, port list - */ -VOID -SetLinkData ( - IN STATE_DATA *State - ) -{ - UINT8 i; - PCI_ADDR LinkBase; - PCI_ADDR Reg; - UINT32 Temp; - UINT32 Widthin; - UINT32 Widthout; - UINT32 Bits; - PCI_ADDR CurrentPtr; - HTIDS_PORT_OVERRIDE_LIST PortOverrides; - - PortOverrides = NULL; - - for (i = 0; i < (State->TotalLinks * 2); i++) { - - ASSERT ((*State->PortList)[i & 0xFE].SelWidthOut == (*State->PortList)[ (i & 0xFE) + 1].SelWidthIn); - ASSERT ((*State->PortList)[i & 0xFE].SelWidthIn == (*State->PortList)[ (i & 0xFE) + 1].SelWidthOut); - ASSERT ((*State->PortList)[i & 0xFE].SelFrequency == (*State->PortList)[ (i & 0xFE) + 1].SelFrequency); - - if ((*State->PortList)[i].SelRegang) { - ASSERT ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU); - ASSERT ((*State->PortList)[i].Link < 4); - State->Nb->SetLinkRegang ( - (*State->PortList)[i].NodeID, - (*State->PortList)[i].Link, - State->Nb - ); - } - - // - // IDS port override for CPUs and IO Devices - // - pf_HtIdsGetPortOverride ((BOOLEAN) ((i & 1) == 0), &(*State->PortList)[i], &(*State->PortList)[i + 1], &PortOverrides, State); - - LinkBase = (*State->PortList)[i].Pointer; - if (((*State->PortList)[i].Type == PORTLIST_TYPE_IO) && ((*State->PortList)[i].Link == 1)) { - LinkBase.Address.Register += HTSLAVE_LINK01_OFFSET; - } - - // HT CRC Feature, set if configured. The default is not to set it, because with some chipsets it - // will lock up if done here. - if (State->IsSetHtCrcFlood) { - Temp = 1; - Reg = LinkBase; - Reg.Address.Register += HTHOST_LINK_CONTROL_REG; - State->HtFeatures->SetHtControlRegisterBits (Reg, 1, 1, &Temp, State); - if ((*State->PortList)[i].Type == PORTLIST_TYPE_IO) { - // IO Devices also need to have SERR enabled. - Reg = LinkBase; - Reg.Address.Register = PCI_CONFIG_COMMAND_REG04; - LibAmdPciWriteBits (Reg, 8, 8, &Temp, State->ConfigHandle); - } - } - - // Some IO devices don't work properly when setting widths, so write them in a single operation, - // rather than individually. - // - Widthout = ConvertWidthToBits ((*State->PortList)[i].SelWidthOut); - ASSERT (Widthout == 1 || Widthout == 0 || Widthout == 5 || Widthout == 4); - Widthin = ConvertWidthToBits ((*State->PortList)[i].SelWidthIn); - ASSERT (Widthin == 1 || Widthin == 0 || Widthin == 5 || Widthin == 4); - - Temp = (Widthin & 7) | ((Widthout & 7) << 4); - Reg = LinkBase; - Reg.Address.Register += HTHOST_LINK_CONTROL_REG; - State->HtFeatures->SetHtControlRegisterBits (Reg, 31, 24, &Temp, State); - - Temp = (*State->PortList)[i].SelFrequency; - if ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) { - State->Nb->SetLinkFrequency ( - (*State->PortList)[i].NodeID, - (*State->PortList)[i].Link, - (UINT8)Temp, - State->Nb - ); - printk(BIOS_DEBUG, "Node:0x%02x Link:0x%02x, HT frequency = 0x%02x\n", - (*State->PortList)[i].NodeID, - (*State->PortList)[i].Link, - (UINT8)Temp); - } else { - ASSERT (Temp <= HT_FREQUENCY_2600M); - // Write the frequency setting - Reg = LinkBase; - Reg.Address.Register += HTSLAVE_FREQ_REV_0_REG; - SetHtIoFrequencyRegisterBits (Reg, 11, 8, &Temp, State); - - // Handle additional HT3 frequency requirements, if needed, - // or clear them if switching down to ht1 on a warm reset. - // Gen1 = 200Mhz -> 1000MHz, Gen3 = 1200MHz -> 2600MHz - // - // Even though we assert if debugging, we need to check that the capability was - // found always, since this is an unknown hardware device, also we are taking - // unqualified frequency from the external interface (could be trying to do ht3 - // on an ht1 IO device). - // - - if (Temp > HT_FREQUENCY_1000M) { - // Enabling features if gen 3 - Bits = 1; - } else { - // Disabling features if gen 1 - Bits = 0; - } - - // Retry Enable - if (DoesDeviceHaveHtSubtypeCap (LinkBase, HT_RETRY_CAPABILITY, &CurrentPtr, State)) { - ASSERT ((*State->PortList)[i].Link < 2); - CurrentPtr.Address.Register += HTRETRY_CONTROL_REG; - LibAmdPciWriteBits (CurrentPtr, - ((*State->PortList)[i].Link * 16), - ((*State->PortList)[i].Link * 16), - &Bits, - State->ConfigHandle); - } else { - // If we are turning it off, that may mean the device was only ht1 capable, - // so don't complain that we can't do it. - // - if (Bits != 0) { - NotifyWarningOptRequiredCapRetry ((*State->PortList)[i].NodeID, - (*State->PortList)[i].HostLink, - (*State->PortList)[i].HostDepth, - State); - } - } - - // Scrambling enable - if (DoesDeviceHaveHtSubtypeCap (LinkBase, HT_GEN3_CAPABILITY, &CurrentPtr, State)) { - ASSERT ((*State->PortList)[i].Link < 2); - CurrentPtr.Address.Register = CurrentPtr.Address.Register + - HTGEN3_LINK_TRAINING_0_REG + - ((*State->PortList)[i].Link * HTGEN3_LINK01_OFFSET); - LibAmdPciWriteBits (CurrentPtr, 3, 3, &Bits, State->ConfigHandle); - } else { - // If we are turning it off, that may mean the device was only ht1 capable, - // so don't complain that we can't do it. - // - if (Bits != 0) { - NotifyWarningOptRequiredCapGen3 ((*State->PortList)[i].NodeID, - (*State->PortList)[i].HostLink, - (*State->PortList)[i].HostDepth, - State); - } - } - } - // Enable Unit ID Clumping if supported. - if (State->IsUsingUnitIdClumping) { - if (((*State->PortList)[i].ClumpingSupport != HT_CLUMPING_PASSIVE) && - ((*State->PortList)[i].ClumpingSupport != HT_CLUMPING_DISABLE)) { - Bits = (*State->PortList)[i].ClumpingSupport; - if ((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) { - State->Nb->SetLinkUnitIdClumping ( - (*State->PortList)[i].NodeID, - (*State->PortList)[i].Link, - (*State->PortList)[i].ClumpingSupport, - State->Nb - ); - } else { - if (DoesDeviceHaveHtSubtypeCap (LinkBase, HT_UNITID_CAPABILITY, &Reg, State)) { - Reg.Address.Register += HTUNIT_ENABLE_REG; - LibAmdPciWriteBits (Reg, 31, 0, &Bits, State->ConfigHandle); - } else { - // If we found one when gathering support, we have to find one now. - ASSERT (FALSE); - } - } - } - } - } -} - -/*------------------------------------------------------------------------------------------*/ -/** - * Find a specific HT capability type. - * - * Search all the PCI Config space capabilities on any type of device for an - * HT capability of the specific subtype. - * - * @param[in] DevicePointer A PCI Config address somewhere in the device config space - * @param[in] CapSubType The HT capability subtype to find - * @param[out] CapabilityBase The Config space base address of the capability, if found. - * @param[in] State Our State - * - * @retval TRUE the capability was found - * @retval FALSE the capability was not found - */ -BOOLEAN -DoesDeviceHaveHtSubtypeCap ( - IN PCI_ADDR DevicePointer, - IN UINT8 CapSubType, - OUT PCI_ADDR *CapabilityBase, - IN STATE_DATA *State - ) -{ - BOOLEAN IsFound; - BOOLEAN IsDone; - PCI_ADDR Reg; - UINT32 Temp; - UINT32 RegSubType; - UINT32 RegSubTypeMask; - - // Set the PCI Config Space base and the match value. - IsFound = FALSE; - IsDone = FALSE; - Reg = DevicePointer; - Reg.Address.Register = 0; - if (CapSubType < (HT_HOST_CAPABILITY + 1)) { - // HT Interface sub type - RegSubType = ((UINT32) (CapSubType << 29) | (UINT32)8); - RegSubTypeMask = HT_INTERFACE_CAP_SUBTYPE_MASK; - } else { - // Other HT capability subtype - RegSubType = ((UINT32) (CapSubType << 27) | (UINT32)8); - RegSubTypeMask = HT_CAP_SUBTYPE_MASK; - } - (*CapabilityBase).AddressValue = (UINT32)ILLEGAL_SBDFO; - - // Find it - do { - LibAmdPciFindNextCap (&Reg, State->ConfigHandle); - if (Reg.AddressValue != (UINT32)ILLEGAL_SBDFO) { - LibAmdPciRead (AccessWidth32, Reg, &Temp, State->ConfigHandle); - // HyperTransport and subtype capability ? - if ((Temp & RegSubTypeMask) == RegSubType) { - *CapabilityBase = Reg; - IsFound = TRUE; - } - // Some other capability, keep looking - } else { - // Not there - IsDone = TRUE; - } - } while (!IsFound && !IsDone); - - return IsFound; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Retry must be enabled on all coherent links if it is enabled on any coherent links. - * - * @HtFeatMethod{::F_SET_LINK_DATA} - * - * Effectively, this means HT3 on some links cannot be mixed with HT1 on others. - * Scan the CPU to CPU links for this condition and limit those frequencies to HT1 - * if it is detected. - * (Non-coherent links are independent.) - * - * @param[in,out] State global state, port frequency settings. - * - * @retval TRUE Fixup occurred, all coherent links HT1 - * @retval FALSE No changes - */ -BOOLEAN -IsCoherentRetryFixup ( - IN STATE_DATA *State - ) -{ - UINT8 Freq; - UINT8 i; - UINT8 DetectedFrequencyState; - BOOLEAN IsMixed; - UINT32 Temp; - - // - // detectedFrequencyState: - // 0 - initial state - // 1 - HT1 Frequencies detected - // 2 - HT3 Frequencies detected - // - IsMixed = FALSE; - DetectedFrequencyState = 0; - - // Scan coherent links for a mix of HT3 / HT1 - for (i = 0; i < (State->TotalLinks * 2); i += 2) { - if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) && ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_CPU)) { - // At this point, Frequency of port [i+1] must equal [i], so just check one of them. - switch (DetectedFrequencyState) { - case 0: - // Set current state to indicate what link frequency we found first - if ((*State->PortList)[i].SelFrequency > HT_FREQUENCY_1000M) { - // HT3 frequencies - DetectedFrequencyState = 2; - } else { - // HT1 frequencies - DetectedFrequencyState = 1; - } - break; - case 1: - // If HT1 frequency detected, fail any HT3 frequency - if ((*State->PortList)[i].SelFrequency > HT_FREQUENCY_1000M) { - IsMixed = TRUE; - } - break; - case 2: - // If HT3 frequency detected, fail any HT1 frequency - if ((*State->PortList)[i].SelFrequency <= HT_FREQUENCY_1000M) { - IsMixed = TRUE; - } - break; - default: - ASSERT (FALSE); - } - if (IsMixed) { - // Don't need to keep checking after we find a mix. - break; - } - } - } - - if (IsMixed) { - for (i = 0; i < (State->TotalLinks * 2); i += 2) { - if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) && ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_CPU)) { - // Limit coherent links to HT 1 frequencies. - Temp = (*State->PortList)[i].CompositeFrequencyCap & (*State->PortList)[i + 1].CompositeFrequencyCap; - Temp &= HT_FREQUENCY_LIMIT_HT1_ONLY; - ASSERT (Temp != 0); - (*State->PortList)[i].CompositeFrequencyCap = Temp; - (*State->PortList)[i + 1].CompositeFrequencyCap = Temp; - Freq = LibAmdBitScanReverse (Temp); - (*State->PortList)[i].SelFrequency = Freq; - (*State->PortList)[i + 1].SelFrequency = Freq; - } - } - } - return (IsMixed); -} diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatOptimization.h b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatOptimization.h deleted file mode 100644 index 3a83e628ab..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatOptimization.h +++ /dev/null @@ -1,139 +0,0 @@ -/** - * @file - * - * Link Optimization Feature. - * - * Contains interface for Link Optimization. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#ifndef _HT_FEAT_OPTIMIZATION_H_ -#define _HT_FEAT_OPTIMIZATION_H_ - -/*---------------------------------------------------------------------------- - * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) - * - *---------------------------------------------------------------------------- - */ - -/*----------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *----------------------------------------------------------------------------- - */ - - -/*---------------------------------------------------------------------------- - * FUNCTIONS PROTOTYPE - * - *---------------------------------------------------------------------------- - */ - -/** - * Translate a desired width setting to the bits to set in the register field. - */ -UINT8 -ConvertWidthToBits ( - IN UINT8 Value - ); - -/** - * Access HT Link Control Register. - * - */ -VOID -SetHtControlRegisterBits ( - IN PCI_ADDR Reg, - IN UINT8 HiBit, - IN UINT8 LoBit, - IN UINT32 *Value, - IN STATE_DATA *State - ); - -/** - * Get Link features into system data structure. - * - */ -VOID -GatherLinkData ( - IN STATE_DATA *State - ); - -/** - * Optimize Links. - * - */ -VOID -SelectOptimalWidthAndFrequency ( - IN OUT STATE_DATA *State - ); - -/** - * Change the hardware state for all Links according to the now optimized data in the - * port list data structure. - * - */ -VOID -SetLinkData ( - IN STATE_DATA *State - ); - -/** - * Retry must be enabled on all coherent links if it is enabled on any coherent links. - * - */ -BOOLEAN -IsCoherentRetryFixup ( - IN STATE_DATA *State - ); - -/** - * Find a specific HT capability type. - * - * @retval FALSE the capability was not found - */ -BOOLEAN -DoesDeviceHaveHtSubtypeCap ( - IN PCI_ADDR DevicePointer, - IN UINT8 CapSubType, - OUT PCI_ADDR *CapabilityBase, - IN STATE_DATA *State - ); - -#endif /* _HT_FEAT_OPTIMIZATION_H_ */ diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatRouting.c b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatRouting.c deleted file mode 100644 index 46dad6cfea..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatRouting.c +++ /dev/null @@ -1,467 +0,0 @@ -/** - * @file - * - * Routing Routines - * - * Contains routines for isomorphic topology matching, - * routing determination, and routing initialization. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "Ids.h" -#include "Topology.h" -#include "htFeat.h" -#include "htInterface.h" -#include "htNotify.h" -#include "htNb.h" -#include "htGraph.h" -#include "htFeatRouting.h" -#include "Filecode.h" -#define FILECODE PROC_HT_FEATURES_HTFEATROUTING_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ -typedef struct { - UINT8 **CurrentPosition; - BOOLEAN IsCustomList; -} TOPOLOGY_CONTEXT; - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*************************************************************************** - *** ISOMORPHISM BASED ROUTING TABLE GENERATION CODE *** - ***************************************************************************/ - -/*----------------------------------------------------------------------------------------*/ -/** - * Return the Link on source Node which connects to target Node - * - * @param[in] SourceNode The Node on which to find the Link - * @param[in] TargetNode The Link will connect to this Node - * @param[in] State Our global state - * - * @return the Link to target - */ -UINT8 -STATIC -FindLinkToNode ( - IN UINT8 SourceNode, - IN UINT8 TargetNode, - IN STATE_DATA *State - ) -{ - UINT8 TargetLink; - UINT8 k; - - // A node linked to itself is not a supported topology graph, this is probably an error in the - // topology data. There is not going to be a portlist match for it. - ASSERT (SourceNode != TargetNode); - TargetLink = INVALID_LINK; - for (k = 0; k < State->TotalLinks*2; k += 2) { - if (((*State->PortList)[k].NodeID == SourceNode) && ((*State->PortList)[k + 1].NodeID == TargetNode)) { - TargetLink = (*State->PortList)[k].Link; - break; - } else if (((*State->PortList)[k + 1].NodeID == SourceNode) && ((*State->PortList)[k].NodeID == TargetNode)) { - TargetLink = (*State->PortList)[k + 1].Link; - break; - } - } - ASSERT (TargetLink != INVALID_LINK); - - return TargetLink; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Is graphA isomorphic to graphB? - * - * If this function returns true, then Perm will contain the permutation - * required to transform graphB into graphA. - * We also use the degree of each Node, that is the number of connections it has, to - * speed up rejection of non-isomorphic graphs (if there is a Node in graphA with n - * connections, there must be at least one unmatched in graphB with n connections). - * - * @param[in] Node the discovered Node which we are trying to match - * with a permutation the topology - * @param[in,out] State our global state, degree and adjacency matrix, - * output a permutation if successful - * @retval TRUE the graphs are isomorphic - * @retval FALSE the graphs are not isomorphic - * - */ -BOOLEAN -STATIC -IsIsomorphic ( - IN UINT8 Node, - IN OUT STATE_DATA *State - ) -{ - UINT8 j; - UINT8 k; - UINT8 Nodecnt; - - // We have only been called if Nodecnt == pSelected->size ! - Nodecnt = State->NodesDiscovered + 1; - - if (Node != Nodecnt) { - // Keep building the permutation - for (j = 0; j < Nodecnt; j++) { - // Make sure the degree matches - if (State->Fabric->SysDegree[Node] != State->Fabric->DbDegree[j]) { - continue; - } - - // Make sure that j hasn't been used yet (ought to use a "used" - // array instead, might be faster) - for (k = 0; k < Node; k++) { - if (State->Fabric->Perm[k] == j) { - break; - } - } - if (k != Node) { - continue; - } - State->Fabric->Perm[Node] = j; - if (IsIsomorphic (Node + 1, State)) { - return TRUE; - } - } - return FALSE; - } else { - // Test to see if the permutation is isomorphic - for (j = 0; j < Nodecnt; j++) { - for (k = 0; k < Nodecnt; k++) { - if (State->Fabric->SysMatrix[j][k] != State->Fabric->DbMatrix[State->Fabric->Perm[j]][State->Fabric->Perm[k]] ) { - return FALSE; - } - } - } - return TRUE; - } -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Set Topology List iterator context to the Beginning and provide the first topology. - * - * Check the interface for a custom topology list. If one is found, set context to the - * first item, and return that item. Otherwise return the first item in the built in list. - * - * @param[in,out] TopologyContextHandle Initialize this context to beginning of lists. - * @param[out] NextTopology The next topology, NULL if end. - * @param[in] State Access to interface, handles. - * - */ -VOID -STATIC -BeginTopologies ( - OUT TOPOLOGY_CONTEXT *TopologyContextHandle, - OUT UINT8 **NextTopology, - IN STATE_DATA *State - ) -{ - if (State->HtBlock->Topolist != NULL) { - // Start with a custom list - TopologyContextHandle->CurrentPosition = State->HtBlock->Topolist; - TopologyContextHandle->IsCustomList = TRUE; - } else { - // Start with the built in list - GetAmdTopolist (&TopologyContextHandle->CurrentPosition); - TopologyContextHandle->IsCustomList = FALSE; - } - *NextTopology = *TopologyContextHandle->CurrentPosition; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Iterate through available topologies. - * - * Increment to the next list item. If we are doing a custom list, when we reach the end - * switch to the built in list. - * - * @param[in,out] TopologyContextHandle Maintain iterator's context from one call to the next - * @param[out] NextTopology The next topology, NULL if end. - * - */ -VOID -STATIC -GetNextTopology ( - IN OUT TOPOLOGY_CONTEXT *TopologyContextHandle, - OUT UINT8 **NextTopology - ) -{ - // Not valid to continue calling this routine after reaching the end. - ASSERT (TopologyContextHandle->CurrentPosition != NULL); - - if (TopologyContextHandle->IsCustomList) { - // We are iterating the custom list from the interface. - TopologyContextHandle->CurrentPosition++; - if (*TopologyContextHandle->CurrentPosition == NULL) { - // We are at the end of the custom list, switch to the built in list. - TopologyContextHandle->IsCustomList = FALSE; - GetAmdTopolist (&TopologyContextHandle->CurrentPosition); - } - } else { - // We are iterating the built in list - TopologyContextHandle->CurrentPosition++; - // If we are at the end of the built in list, NextTopology == NULL is the AtEnd. - } - *NextTopology = *TopologyContextHandle->CurrentPosition; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Using the description of the fabric topology we discovered, try to find a match - * among the supported topologies. - * - * @HtFeatMethod{::F_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES} - * - * A supported topology description matches the discovered fabric if the Nodes can be - * matched in such a way that all the Nodes connected in one set are exactly the - * Nodes connected in the other (formally, that the graphs are isomorphic). Which - * Links are used is not really important to matching. If the graphs match, then - * there is a permutation of one that translates the Node positions and Linkages to - * the other. - * - * In order to make the isomorphism test efficient, we test for matched number of Nodes - * (a 4 Node fabric is not isomorphic to a 2 Node topology), and provide degrees of Nodes - * to the isomorphism test. - * - * The generic routing table solution for any topology is predetermined and represented - * as part of the topology. The permutation we computed tells us how to interpret the - * routing onto the fabric we discovered. We do this working backward from the last - * Node discovered to the BSP, writing the routing tables as we go. - * - * @param[in,out] State the discovered fabric, degree matrix, permutation - * - */ -VOID -LookupComputeAndLoadRoutingTables ( - IN OUT STATE_DATA *State - ) -{ - TOPOLOGY_CONTEXT TopologyContextHandle; - UINT8 *Selected; - UINT8 Size; - UINT8 PairCounter; - UINT8 ReqTargetLink; - UINT8 RspTargetLink; - UINT8 ReqTargetNode; - UINT8 RspTargetNode; - UINT8 AbstractBcTargetNodes; - UINT32 BcTargetLinks; - UINT8 NodeCounter; - UINT8 NodeBeingRouted; - UINT8 NodeRoutedTo; - UINT8 BroadcastSourceNode; - - Size = State->NodesDiscovered + 1; - BeginTopologies (&TopologyContextHandle, &Selected, State); - while (Selected != NULL) { - if (GraphHowManyNodes (Selected) == Size) { - // Build Degree vector and Adjacency Matrix for this entry - for (NodeCounter = 0; NodeCounter < Size; NodeCounter++) { - State->Fabric->DbDegree[NodeCounter] = 0; - for (PairCounter = 0; PairCounter < Size; PairCounter++) { - if (GraphIsAdjacent (Selected, NodeCounter, PairCounter)) { - State->Fabric->DbMatrix[NodeCounter][PairCounter] = TRUE; - State->Fabric->DbDegree[NodeCounter]++; - } else { - State->Fabric->DbMatrix[NodeCounter][PairCounter] = FALSE; - } - } - } - - if (IsIsomorphic (0, State)) { - break; // A matching topology was found - } - } - GetNextTopology (&TopologyContextHandle, &Selected); - } - - if (Selected != NULL) { - // Compute the reverse Permutation - for (NodeCounter = 0; NodeCounter < Size; NodeCounter++) { - State->Fabric->ReversePerm[State->Fabric->Perm[NodeCounter]] = NodeCounter; - } - - // Start with the last discovered Node, and move towards the BSP - for (NodeCounter = 0; NodeCounter < Size; NodeCounter++) { - NodeBeingRouted = ((Size - 1) - NodeCounter); - for (NodeRoutedTo = 0; NodeRoutedTo < Size; NodeRoutedTo++) { - BcTargetLinks = 0; - AbstractBcTargetNodes = GraphGetBc (Selected, State->Fabric->Perm[NodeBeingRouted], State->Fabric->Perm[NodeRoutedTo]); - - for (BroadcastSourceNode = 0; BroadcastSourceNode < MAX_NODES; BroadcastSourceNode++) { - if ((AbstractBcTargetNodes & ((UINT32)1 << BroadcastSourceNode)) != 0) { - // Accepting broadcast from yourself is handled in Nb, so in the topology graph it is an error. - ASSERT (NodeBeingRouted != State->Fabric->ReversePerm[BroadcastSourceNode]); - BcTargetLinks |= (UINT32)1 << FindLinkToNode (NodeBeingRouted, State->Fabric->ReversePerm[BroadcastSourceNode], State); - } - } - - if (NodeBeingRouted == NodeRoutedTo) { - ReqTargetLink = ROUTE_TO_SELF; - RspTargetLink = ROUTE_TO_SELF; - } else { - ReqTargetNode = GraphGetReq (Selected, State->Fabric->Perm[NodeBeingRouted], State->Fabric->Perm[NodeRoutedTo]); - ReqTargetLink = FindLinkToNode (NodeBeingRouted, State->Fabric->ReversePerm[ReqTargetNode], State); - - RspTargetNode = GraphGetRsp (Selected, State->Fabric->Perm[NodeBeingRouted], State->Fabric->Perm[NodeRoutedTo]); - RspTargetLink = FindLinkToNode (NodeBeingRouted, State->Fabric->ReversePerm[RspTargetNode], State); - } - State->Nb->WriteFullRoutingTable (NodeBeingRouted, NodeRoutedTo, ReqTargetLink, RspTargetLink, BcTargetLinks, State->Nb); - } - // Clean up discovery 'footprint' that otherwise remains in the routing table. It didn't hurt - // anything, but might cause confusion during debug and validation. Do this by setting the - // route back to all self routes. Since it's the Node that would be one more than actually installed, - // this only applies if less than MaxNodes were found. - // - if (Size < MAX_NODES) { - State->Nb->WriteFullRoutingTable (NodeBeingRouted, Size, ROUTE_TO_SELF, ROUTE_TO_SELF, 0, State->Nb); - } - } - } else { - // - // No Matching Topology was found - // Error Strategy: - // Auto recovery doesn't seem likely, Force boot as 1P. - // For reporting, logging, provide number of Nodes - // If not implemented or returns, boot as BSP uniprocessor. - // - // This can be caused by not supplying an additional topology list, if your board is not one of the built-in topologies. - // - NotifyErrorCohNoTopology (State->NodesDiscovered, State); - IDS_ERROR_TRAP; - // Force 1P - State->NodesDiscovered = 0; - State->TotalLinks = 0; - State->Nb->EnableRoutingTables (0, State->Nb); - State->HtInterface->CleanMapsAfterError (State); - } - // Save the topology pointer, or NULL, for other features - State->Fabric->MatchedTopology = Selected; -} - -/*----------------------------------------------------------------------------------------*/ -/** - * Make a Hop Count Table for the installed topology. - * - * @HtFeatMethod{::F_MAKE_HOP_COUNT_TABLE} - * - * For SLIT, create a node x node matrix with the number of hops. We can do this - * using the topology and the permutation, counting the nodes visited in the routes between - * nodes. - * - * @param[in,out] State access topology, permutation, update hop table - * - */ -VOID -MakeHopCountTable ( - IN OUT STATE_DATA *State - ) -{ - UINT8 Origin; - UINT8 Target; - UINT8 Current; - UINT8 Hops; - UINT8 Size; - - ASSERT (State->Fabric != NULL); - if (State->HopCountTable != NULL) { - if (State->Fabric->MatchedTopology != NULL) { - Size = GraphHowManyNodes (State->Fabric->MatchedTopology); - State->HopCountTable->Size = Size; - // - // For each node, targeting each node, follow the request path through the database graph, - // counting the number of edges. - // - for (Origin = 0; Origin < Size; Origin++) { - for (Target = 0; Target < Size; Target++) { - // If both nodes are the same the answer will be zero - Hops = 0; - // Current starts as the database node corresponding to system node Origin. - Current = State->Fabric->Perm[Origin]; - // Stop if Current is the database node corresponding to system node Target - while (Current != State->Fabric->Perm[Target]) { - // This is a hop, so count it. Move Current to the next intermediate database node. - Hops++; - Current = GraphGetReq (State->Fabric->MatchedTopology, Current, State->Fabric->Perm[Target]); - } - // Put the hop count in the table. - State->HopCountTable->Hops[ ((Origin * Size) + Target)] = Hops; - } - } - } - } -} diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatRouting.h b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatRouting.h deleted file mode 100644 index 1c9d5b860e..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatRouting.h +++ /dev/null @@ -1,89 +0,0 @@ -/** - * @file - * - * Routing Feature Interface. - * - * Interfaces to routing and isomorphism routines. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#ifndef _HT_FEAT_ROUTING_H_ -#define _HT_FEAT_ROUTING_H_ - -/*---------------------------------------------------------------------------- - * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) - * - *---------------------------------------------------------------------------- - */ - -/*----------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *----------------------------------------------------------------------------- - */ - - -/*---------------------------------------------------------------------------- - * FUNCTIONS PROTOTYPE - * - *---------------------------------------------------------------------------- - */ - -/** - * Using the description of the fabric topology we discovered, try to find a match - * among the supported topologies. - * - */ -VOID -LookupComputeAndLoadRoutingTables ( - IN OUT STATE_DATA *State - ); - -/** - * Make a Hop Count Table for the installed topology. - * - */ -VOID -MakeHopCountTable ( - IN OUT STATE_DATA *State - ); - -#endif /* _HT_FEAT_ROUTING_H_ */ - - diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatSets.c b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatSets.c deleted file mode 100644 index 15fc8c3146..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatSets.c +++ /dev/null @@ -1,110 +0,0 @@ -/** - * @file - * - * HyperTransport feature sets initializers. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "amdlib.h" -#include "OptionsHt.h" -#include "Ids.h" -#include "Topology.h" -#include "htFeat.h" -#include "CommonReturns.h" -#include "htFeatDynamicDiscovery.h" -#include "htFeatRouting.h" -#include "htFeatNoncoherent.h" -#include "htFeatOptimization.h" -#include "htFeatGanging.h" -#include "htFeatSublinks.h" -#include "htFeatTrafficDistribution.h" -#include "Filecode.h" -#define FILECODE PROC_HT_FEATURES_HTFEATSETS_FILECODE -extern CONST OPTION_HT_CONFIGURATION OptionHtConfiguration; - -/** - * Initializer for the default feature set implementation, - * full features. - */ -CONST HT_FEATURES ROMDATA HtFeaturesDefault = -{ - CoherentDiscovery, - LookupComputeAndLoadRoutingTables, - MakeHopCountTable, - ProcessLink, - GatherLinkData, - SelectOptimalWidthAndFrequency, - RegangLinks, - SubLinkRatioFixup, - IsCoherentRetryFixup, - SetLinkData, - TrafficDistribution, - SetHtControlRegisterBits, - ConvertWidthToBits -}; - -/** - * Initializer for the non-coherent only build option. - */ -CONST HT_FEATURES ROMDATA HtFeaturesNonCoherentOnly = -{ - (PF_COHERENT_DISCOVERY)CommonVoid, - (PF_LOOKUP_COMPUTE_AND_LOAD_ROUTING_TABLES)CommonVoid, - (PF_MAKE_HOP_COUNT_TABLE)CommonVoid, - ProcessLink, - GatherLinkData, - SelectOptimalWidthAndFrequency, - (PF_REGANG_LINKS)CommonVoid, - (PF_SUBLINK_RATIO_FIXUP)CommonVoid, - (PF_IS_COHERENT_RETRY_FIXUP)CommonReturnFalse, - SetLinkData, - (PF_TRAFFIC_DISTRIBUTION)CommonVoid, - SetHtControlRegisterBits, - ConvertWidthToBits -}; diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatSublinks.c b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatSublinks.c deleted file mode 100644 index 6824c4bc7f..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatSublinks.c +++ /dev/null @@ -1,228 +0,0 @@ -/** - * @file - * - * SubLink management Routines. - * - * Contains routines for subLink frequency ratios. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "Ids.h" -#include "amdlib.h" -#include "Topology.h" -#include "htFeat.h" -#include "IdsHt.h" -#include "htFeatSublinks.h" -#include "Filecode.h" -#define FILECODE PROC_HT_FEATURES_HTFEATSUBLINKS_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -typedef struct { - UINT8 HiFreq; - UINT8 LoFreq; -} VALID_RATIO_ITEM; - -STATIC CONST VALID_RATIO_ITEM ROMDATA ValidRatioList[] = -{ - {HT_FREQUENCY_3200M, HT_FREQUENCY_1600M}, // 3200MHz / 1600MHz 2:1 - {HT_FREQUENCY_3200M, HT_FREQUENCY_800M}, // 3200MHz / 800MHz 4:1 - {HT_FREQUENCY_3200M, HT_FREQUENCY_400M}, // 3200MHz / 400MHz 8:1 - {HT_FREQUENCY_2800M, HT_FREQUENCY_1400M}, // 2800MHz / 1400MHz 2:1 - {HT_FREQUENCY_2400M, HT_FREQUENCY_1200M}, // 2400MHz / 1200MHz 2:1 - {HT_FREQUENCY_2400M, HT_FREQUENCY_600M}, // 2400MHz / 600MHz 4:1 - {HT_FREQUENCY_2400M, HT_FREQUENCY_400M}, // 2400MHz / 400MHz 6:1 - {HT_FREQUENCY_2000M, HT_FREQUENCY_1000M}, // 2000MHz / 1000MHz 2:1 - {HT_FREQUENCY_1600M, HT_FREQUENCY_800M}, // 1600MHz / 800MHz 2:1 - {HT_FREQUENCY_1600M, HT_FREQUENCY_400M}, // 1600MHz / 400MHz 4:1 - {HT_FREQUENCY_1600M, HT_FREQUENCY_200M}, // 1600MHz / 200Mhz 8:1 - {HT_FREQUENCY_1200M, HT_FREQUENCY_600M}, // 1200MHz / 600MHz 2:1 - {HT_FREQUENCY_1200M, HT_FREQUENCY_200M}, // 1200MHz / 200MHz 6:1 - {HT_FREQUENCY_800M, HT_FREQUENCY_400M}, // 800MHz / 400MHz 2:1 - {HT_FREQUENCY_800M, HT_FREQUENCY_200M}, // 800MHz / 200MHz 4:1 - {HT_FREQUENCY_400M, HT_FREQUENCY_200M} // 400MHz / 200MHz 2:1 -}; - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*************************************************************************** - *** Link Optimization *** - ***************************************************************************/ - -/*----------------------------------------------------------------------------------------*/ -/** - * Iterate through all Links, checking the frequency of each subLink pair. - * - * @HtFeatMethod{::F_SUBLINK_RATIO_FIXUP} - * - * Make the adjustment to the port list data so that the frequencies - * are at a valid ratio, reducing frequency as needed to achieve - * this. (All Links support the minimum 200 MHz frequency.) Repeat - * the above until no adjustments are needed. - * @note no hardware state changes in this routine. - * - * @param[in,out] State Link state and port list - * - */ -VOID -SubLinkRatioFixup ( - IN OUT STATE_DATA *State - ) -{ - UINT8 i; - UINT8 j; - UINT8 ValidRatioItem; - BOOLEAN Changes; - BOOLEAN Downgrade; - UINT8 HiIndex; - UINT8 HiFreq; - UINT8 LoFreq; - - UINT32 Temp; - - do { - Changes = FALSE; - for (i = 0; i < State->TotalLinks*2; i++) { - // Must be a CPU Link - if ((*State->PortList)[i].Type != PORTLIST_TYPE_CPU) { - continue; - } - // Only look for subLink1's - if ((*State->PortList)[i].Link < 4) { - continue; - } - - for (j = 0; j < State->TotalLinks*2; j++) { - // Step 1. Find the matching subLink0 - if ((*State->PortList)[j].Type != PORTLIST_TYPE_CPU) { - continue; - } - if ((*State->PortList)[j].NodeID != (*State->PortList)[i].NodeID) { - continue; - } - if ((*State->PortList)[j].Link != ((*State->PortList)[i].Link & 0x03)) { - continue; - } - - // Step 2. Check for an illegal frequency ratio - if ((*State->PortList)[i].SelFrequency >= (*State->PortList)[j].SelFrequency) { - HiIndex = i; - HiFreq = (*State->PortList)[i].SelFrequency; - LoFreq = (*State->PortList)[j].SelFrequency; - } else { - HiIndex = j; - HiFreq = (*State->PortList)[j].SelFrequency; - LoFreq = (*State->PortList)[i].SelFrequency; - } - - // The frequencies are 1:1, no need to do anything - if (HiFreq == LoFreq) { - break; - } - - Downgrade = TRUE; - - for (ValidRatioItem = 0; ValidRatioItem < (sizeof (ValidRatioList) / sizeof (VALID_RATIO_ITEM)); ValidRatioItem++) { - if ((HiFreq == ValidRatioList[ValidRatioItem].HiFreq) && - (LoFreq == ValidRatioList[ValidRatioItem].LoFreq)) { - Downgrade = FALSE; - break; - } - } - - // Step 3. Downgrade the higher of the two frequencies, and set Changes to FALSE - if (Downgrade) { - // Although the problem was with the port specified by hiIndex, we need to - // Downgrade both ends of the Link. - HiIndex = HiIndex & 0xFE; // Select the 'upstream' (i.e. even) port - - Temp = (*State->PortList)[HiIndex].CompositeFrequencyCap; - - // Remove HiFreq from the list of valid frequencies - Temp = Temp & ~((UINT32)1 << HiFreq); - ASSERT (Temp != 0); - (*State->PortList)[HiIndex].CompositeFrequencyCap = (UINT32)Temp; - (*State->PortList)[HiIndex + 1].CompositeFrequencyCap = (UINT32)Temp; - - HiFreq = LibAmdBitScanReverse (Temp); - - (*State->PortList)[HiIndex].SelFrequency = HiFreq; - (*State->PortList)[HiIndex + 1].SelFrequency = HiFreq; - - Changes = TRUE; - } - } - } - } while (Changes); // Repeat until a valid configuration is reached -} diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatSublinks.h b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatSublinks.h deleted file mode 100644 index 4684d4005c..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatSublinks.h +++ /dev/null @@ -1,79 +0,0 @@ -/** - * @file - * - * SubLink Interface. - * - * Contains interface to subLink management feature, for unganged subLinks. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -#ifndef _HT_FEAT_SUBLINKS_H_ -#define _HT_FEAT_SUBLINKS_H_ - -/*---------------------------------------------------------------------------- - * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) - * - *---------------------------------------------------------------------------- - */ - -/*----------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *----------------------------------------------------------------------------- - */ - - -/*---------------------------------------------------------------------------- - * FUNCTIONS PROTOTYPE - * - *---------------------------------------------------------------------------- - */ - -/** - * Iterate through all Links, checking the frequency of each subLink pair. - * - */ -VOID -SubLinkRatioFixup ( - IN OUT STATE_DATA *State - ); - -#endif /* _HT_FEAT_SUBLINKS_H_ */ - - diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatTrafficDistribution.c b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatTrafficDistribution.c deleted file mode 100644 index 9bf7122fae..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatTrafficDistribution.c +++ /dev/null @@ -1,265 +0,0 @@ -/** - * @file - * - * Traffic Distribution Routines. - * - * Contains routines for traffic distribution - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* - ***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * *************************************************************************** - * - */ - -/* - *---------------------------------------------------------------------------- - * MODULES USED - * - *---------------------------------------------------------------------------- - */ - - - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "Topology.h" -#include "htFeat.h" -#include "htInterface.h" -#include "htNb.h" -#include "htNotify.h" -#include "htFeatTrafficDistribution.h" -#include "Filecode.h" -#define FILECODE PROC_HT_FEATURES_HTFEATTRAFFICDISTRIBUTION_FILECODE -/*---------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * TYPEDEFS AND STRUCTURES - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * PROTOTYPES OF LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * EXPORTED FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*---------------------------------------------------------------------------- - * LOCAL FUNCTIONS - * - *---------------------------------------------------------------------------- - */ - -/*----------------------------------------------------------------------------------------*/ -/** - * Identify Links which can have traffic distribution. - * - * @HtFeatMethod{::F_TRAFFIC_DISTRIBUTION} - * - * If there are redundant links between any nodes, traffic distribution allows the - * redundant links to be used to improve performance. - * - * There are two types of traffic distribution. Their use is mutually exclusive, both - * can not be used at once. - * - * Coherent Traffic Distribution is for systems of exactly two nodes only. All links must - * be symmetrical (the same width). As many links as are connected can be distributed over. - * - * Link Pair Traffic Distribution works with redundant pairs of links between any two nodes, - * it does not matter how many nodes are in the system or how many have a redundant link pair. - * A node can have redundant link pairs with more than one other node. - * The link pair can be asymmetric, the largest link must be used as the master. However, - * between any pair of nodes there is only one pair of redundant links, and there is a limit - * to the total number of pairs each node can have. So not all links will necessarily be - * made usable. - * - * @param[in] State port list data - */ -VOID -TrafficDistribution ( - IN STATE_DATA *State - ) -{ - UINT32 Links01; - UINT32 Links10; - UINT8 LinkCount; - UINT8 i; - UINT8 LastLink; - BOOLEAN IsAsymmetric; - UINT8 RedundantLinkCount[MAX_NODES][MAX_NODES]; - UINT8 MasterLinkPort[MAX_NODES][MAX_NODES]; - UINT8 AlternateLinkPort[MAX_NODES][MAX_NODES]; - UINT8 NodeA; - UINT8 NodeB; - UINT8 PairCount; - - LastLink = 0xFF; - IsAsymmetric = FALSE; - - // Traffic Distribution is only used when there are exactly two Nodes in the system - // and when all the links are symmetric, same width. - if ((State->NodesDiscovered + 1) == 2) { - Links01 = 0; - Links10 = 0; - LinkCount = 0; - for (i = 0; i < (State->TotalLinks * 2); i += 2) { - if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) && - ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_CPU)) { - if ((LastLink != 0xFF) && - ((*State->PortList)[i].SelWidthOut != (*State->PortList)[LastLink].SelWidthOut) && - ((*State->PortList)[i + 1].SelWidthOut != (*State->PortList)[LastLink + 1].SelWidthOut)) { - IsAsymmetric = TRUE; - break; - } - Links01 |= (UINT32)1 << (*State->PortList)[i].Link; - Links10 |= (UINT32)1 << (*State->PortList)[i + 1].Link; - LinkCount++; - LastLink = i; - } - } - ASSERT (LinkCount != 0); - // Don't setup Traffic Distribution if only one Link is being used or there were asymmetric widths - if ((LinkCount != 1) && !IsAsymmetric) { - State->Nb->WriteTrafficDistribution (Links01, Links10, State->Nb); - // If we did Traffic Distribution, we must not do Link Pair, so get out of here. - return; - } - } - // Either there are more than two nodes, Asymmetric links, or no redundant links. - // See if we can use Link Pair Traffic Distribution - LibAmdMemFill (&RedundantLinkCount, 0, (MAX_NODES * MAX_NODES), State->ConfigHandle); - for (i = 0; i < (State->TotalLinks * 2); i += 2) { - if (((*State->PortList)[i].Type == PORTLIST_TYPE_CPU) && - ((*State->PortList)[i + 1].Type == PORTLIST_TYPE_CPU)) { - NodeA = (*State->PortList)[i].NodeID; - NodeB = (*State->PortList)[i + 1].NodeID; - if (RedundantLinkCount[NodeA][NodeB] == 0) { - // This is the first link connecting two nodes - ASSERT (RedundantLinkCount[NodeB][NodeA] == 0); - MasterLinkPort[NodeA][NodeB] = i; - MasterLinkPort[NodeB][NodeA] = i + 1; - } else { - // This is a redundant link. If it is larger than the current master link, - // make it the new master link. - // - if (((*State->PortList)[MasterLinkPort[NodeA][NodeB]].SelWidthOut < (*State->PortList)[i].SelWidthOut) && - ((*State->PortList)[MasterLinkPort[NodeB][NodeA]].SelWidthOut < (*State->PortList)[i + 1].SelWidthOut)) { - // Make the old master link the alternate, we don't need to check, it is bigger. - AlternateLinkPort[NodeA][NodeB] = MasterLinkPort[NodeA][NodeB]; - AlternateLinkPort[NodeB][NodeA] = MasterLinkPort[NodeB][NodeA]; - MasterLinkPort[NodeA][NodeB] = i; - MasterLinkPort[NodeB][NodeA] = i + 1; - } else { - // Since the new link isn't bigger than the Master, check if it is bigger than the alternate, - // if we have an alternate. If we don't have an alternate yet, make this link the alternate. - if (RedundantLinkCount[NodeA][NodeB] == 1) { - AlternateLinkPort[NodeA][NodeB] = i; - AlternateLinkPort[NodeB][NodeA] = i + 1; - } else { - if (((*State->PortList)[AlternateLinkPort[NodeA][NodeB]].SelWidthOut < (*State->PortList)[i].SelWidthOut) && - ((*State->PortList)[AlternateLinkPort[NodeB][NodeA]].SelWidthOut < (*State->PortList)[i + 1].SelWidthOut)) { - // Warning: the alternate link is an unusable redundant link - // Then make the new link the alternate link. - NotifyWarningOptUnusedLinks ( - NodeA, - (*State->PortList)[AlternateLinkPort[NodeA][NodeB]].Link, - NodeB, - (*State->PortList)[AlternateLinkPort[NodeB][NodeA]].Link, - State - ); - ASSERT (RedundantLinkCount[NodeB][NodeA] > 1); - AlternateLinkPort[NodeA][NodeB] = i; - AlternateLinkPort[NodeB][NodeA] = i + 1; - } else { - // Warning the current link is an unusable redundant link - NotifyWarningOptUnusedLinks (NodeA, (*State->PortList)[i].Link, NodeB, (*State->PortList)[i].Link, State); - } - } - } - } - RedundantLinkCount[NodeA][NodeB]++; - RedundantLinkCount[NodeB][NodeA]++; - } - } - // If we found any, now apply up to 4 per node - for (NodeA = 0; NodeA < MAX_NODES; NodeA++) { - PairCount = 0; - for (NodeB = 0; NodeB < MAX_NODES; NodeB++) { - if (RedundantLinkCount[NodeA][NodeB] > 1) { - // Then there is a pair of links (at least, but we only care about the pair not the extras) - if (PairCount < MAX_LINK_PAIRS) { - // Program it - if ((*State->PortList)[MasterLinkPort[NodeA][NodeB]].SelWidthOut - != (*State->PortList)[AlternateLinkPort[NodeA][NodeB]].SelWidthOut) { - IsAsymmetric = TRUE; - } else { - IsAsymmetric = FALSE; - } - State->Nb->WriteLinkPairDistribution ( - NodeA, - NodeB, - PairCount, - IsAsymmetric, - (*State->PortList)[MasterLinkPort[NodeA][NodeB]].Link, - (*State->PortList)[AlternateLinkPort[NodeA][NodeB]].Link, - State->Nb - ); - PairCount++; - } else { - // Warning: More link pairs than can be distributed - NotifyWarningOptLinkPairExceed ( - NodeA, NodeB, - (*State->PortList)[MasterLinkPort[NodeA][NodeB]].Link, - (*State->PortList)[AlternateLinkPort[NodeA][NodeB]].Link, - State); - // Disable the link pair from the other node, the analysis loop made sure there - // can only be a single link pair between a pair of nodes. - RedundantLinkCount[NodeB][NodeA] = 1; - } - } - } - } -} diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatTrafficDistribution.h b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatTrafficDistribution.h deleted file mode 100644 index 59570109aa..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htFeatTrafficDistribution.h +++ /dev/null @@ -1,76 +0,0 @@ -/** - * @file - * - * Traffic Distribution Interface. - * - * Interface to traffic distribution feature. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - * - */ -/* -***************************************************************************** -* -* Copyright (c) 2011, Advanced Micro Devices, Inc. -* All rights reserved. -* -* Redistribution and use in source and binary forms, with or without -* modification, are permitted provided that the following conditions are met: -* * Redistributions of source code must retain the above copyright -* notice, this list of conditions and the following disclaimer. -* * Redistributions in binary form must reproduce the above copyright -* notice, this list of conditions and the following disclaimer in the -* documentation and/or other materials provided with the distribution. -* * Neither the name of Advanced Micro Devices, Inc. nor the names of -* its contributors may be used to endorse or promote products derived -* from this software without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY -* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -* *************************************************************************** -* -*/ - -#ifndef _HT_FEAT_TRAFFIC_DISTRIBUTION_H_ -#define _HT_FEAT_TRAFFIC_DISTRIBUTION_H_ - -/*---------------------------------------------------------------------------- - * Mixed (DEFINITIONS AND MACROS / TYPEDEFS, STRUCTURES, ENUMS) - * - *---------------------------------------------------------------------------- - */ - -/*----------------------------------------------------------------------------- - * DEFINITIONS AND MACROS - * - *----------------------------------------------------------------------------- - */ - - -/*---------------------------------------------------------------------------- - * FUNCTIONS PROTOTYPE - * - *---------------------------------------------------------------------------- - */ -/** - * Identify Links which can have traffic distribution. - * - */ -VOID -TrafficDistribution ( - IN STATE_DATA *State - ); - -#endif /* _HT_FEAT_TRAFFIC_DISTRIBUTION_H_ */ diff --git a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htIds.c b/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htIds.c deleted file mode 100644 index 06c69b4471..0000000000 --- a/src/vendorcode/amd/agesa/f10/Proc/HT/Features/htIds.c +++ /dev/null @@ -1,148 +0,0 @@ -/** - * @file - * - * AMD IDS HyperTransport Implementation. - * - * Contains AMD AGESA Integrated Debug HT related support. - * - * @xrefitem bom "File Content Label" "Release Content" - * @e project: AGESA - * @e sub-project: HyperTransport - * @e \$Revision: 44323 $ @e \$Date: 2010-12-22 01:24:58 -0700 (Wed, 22 Dec 2010) $ - */ -/***************************************************************************** - * - * Copyright (c) 2011, Advanced Micro Devices, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Advanced Micro Devices, Inc. nor the names of - * its contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * - ***************************************************************************/ - - -#include "AGESA.h" -#include "amdlib.h" -#include "Ids.h" -#include "Topology.h" -#include "htFeat.h" -#include "IdsHt.h" -#include "htInterface.h" -#include "htInterfaceGeneral.h" -#include "htNb.h" -#include "heapManager.h" -#include "Filecode.h" -#define FILECODE PROC_HT_FEATURES_HTIDS_FILECODE - - -/*-------------------------------------------------------------------------------------*/ -/** - * Apply an IDS port override to the desired HT link. - * - * The IDS port override allows absolute control of a link's frequency and width, such as - * would be used for board characterization and test. The IDS backend code is responsible - * for handling the NV items and building them into a port override list. Here we search - * that list for any overrides which apply, and update the data used by the HT feature code. - * - * @param[in] IsSourcePort Since we handle both ports on a match, only do that if TRUE. - * @param[in,out] Port0 The PORTLIST item for the first endpoint of a link. - * @param[in,out] Port1 The PORTLIST item for the second endpoint of a link. - * @param[in,out] PortOverrideList IN: A pointer to the port override list or NULL, - * OUT: A pointer to the port override list. - * @param[in] State access to ht interface and nb support methods. - * - */ -VOID -HtIdsGetPortOverride ( - IN BOOLEAN IsSourcePort, - IN OUT PORT_DESCRIPTOR *Port0, - IN OUT PORT_DESCRIPTOR *Port1, - IN OUT HTIDS_PORT_OVERRIDE_LIST *PortOverrideList, - IN STATE_DATA *State - ) -{ - LOCATE_HEAP_PTR LocHeapParams; - UINT8 SocketA; - UINT8 SocketB; - UINT8 PackageLinkA; - UINT8 PackageLinkB; - HTIDS_PORT_OVERRIDE_LIST p; - - if (IsSourcePort) { - ASSERT (PortOverrideList != NULL); - // The caller can cache the override list by providing the pointer (to the heap buffer). - // If the pointer to the port override list is null, then check if it is on the heap, - // and update the caller's pointer so it is cached. - // If the buffer is not in heap, call the IDS backend to get the NV data (which is likely also - // in heap). - if (*PortOverrideList == NULL) { - // locate the table in heap - LocHeapParams.BufferHandle = IDS_HT_DATA_HANDLE; - if (HeapLocateBuffer (&LocHeapParams, State->ConfigHandle) == AGESA_SUCCESS) { - *PortOverrideList = (HTIDS_PORT_OVERRIDE_LIST)LocHeapParams.BufferPtr; - } else { - // Ask IDS backend code for the list - IDS_OPTION_HOOK (IDS_HT_CONTROL, PortOverrideList, State->ConfigHandle); - } - } - ASSERT (*PortOverrideList != NULL); - - // Search the port override list to see if there is an override that applies to this link. - // The match criteria are if either endpoint of the current port list item matches - // port override. - p = *PortOverrideList; - SocketA = State->HtInterface->GetSocketFromMap (Port0->NodeID, State); - PackageLinkA = State->Nb->GetPackageLink (Port0->NodeID, Port0->Link, State->Nb); - SocketB = State->HtInterface->GetSocketFromMap (Port1->NodeID, State); - PackageLinkB = State->Nb->GetPackageLink (Port1->NodeID, Port1->Link, State->Nb); - - while ((p != NULL) && (p->Socket != HT_LIST_TERMINAL)) { - if ((((p->Socket == SocketA) || (p->Socket == HT_LIST_MATCH_ANY)) && - ((p->Link == PackageLinkA) || - ((p->Link == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLinkA))) || - ((p->Link == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkA))))) || - (((p->Socket == SocketB) || (p->Socket == HT_LIST_MATCH_ANY)) && - ((p->Link == PackageLinkB) || - ((p->Link == HT_LIST_MATCH_ANY) && (!IsPackageLinkInternal (PackageLinkA))) || - ((p->Link == HT_LIST_MATCH_INTERNAL_LINK) && (IsPackageLinkInternal (PackageLinkB)))))) { - // Found a match, update width and frequency of both endpoints. - if (p->WidthIn != HT_LIST_TERMINAL) { - Port0->SelWidthIn = p->WidthIn; - Port1->SelWidthOut = p->WidthIn; - } - if (p->WidthOut != HT_LIST_TERMINAL) { - Port0->SelWidthOut = p->WidthOut; - Port1->SelWidthIn = p->WidthOut; - } - if (p->Frequency != HT_LIST_TERMINAL) { - Port0->SelFrequency = p->Frequency; - Port1->SelFrequency = p->Frequency; - } - break; - } else { - p++; - } - } - } -} - |