Add AMD Agesa and AMD CIMx SB800 code. Patch 1 of 8.

This code currently generates many warnings that are functionally benign.  These are being addressed, but the wheels of bureaucracy turn slowly.  This drop supports AMD cpu families 10h and 14h.  Only Family 14h is used as an example in this set of patches.  Other cpu families are supported by the infrastructure, but their specific support is not included herein.  This patch is functionally independent of the other patches in this set.

Signed-off-by: Frank Vibrans <frank.vibrans@amd.com>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Marc Jones <marcj303@gmail.com>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 121 insertions, 0 deletions

diff --git a/src/vendorcode/amd/agesa/Proc/HT/Fam10/htNbNonCoherentFam10.c b/src/vendorcode/amd/agesa/Proc/HT/Fam10/htNbNonCoherentFam10.c
new file mode 100644
index 0000000000..18d6da33bb
--- /dev/null
+++ b/src/vendorcode/amd/agesa/Proc/HT/Fam10/htNbNonCoherentFam10.c
@@ -0,0 +1,121 @@
+/* $NoKeywords:$ */
+/**
+ * @file
+ *
+ * Northbridge non-coherent support for Family 10h processors.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  HyperTransport
+ * @e \$Revision: 35136 $   @e \$Date: 2010-07-16 11:29:48 +0800 (Fri, 16 Jul 2010) $
+ *
+ */
+/*
+ *****************************************************************************
+ *
+ * Copyright (c) 2011, Advanced Micro Devices, Inc.
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Advanced Micro Devices, Inc. nor the names of 
+ *       its contributors may be used to endorse or promote products derived 
+ *       from this software without specific prior written permission.
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL ADVANCED MICRO DEVICES, INC. BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ * ***************************************************************************
+ *
+ */
+
+/*
+ *----------------------------------------------------------------------------
+ *                                MODULES USED
+ *
+ *----------------------------------------------------------------------------
+ */
+
+
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "Topology.h"
+#include "htFeat.h"
+#include "htNb.h"
+#include "htNbHardwareFam10.h"
+#include "htNbNonCoherentFam10.h"
+#include "Filecode.h"
+CODE_GROUP (G1_PEICC)
+RDATA_GROUP (G1_PEICC)
+
+#define FILECODE PROC_HT_FAM10_HTNBNONCOHERENTFAM10_FILECODE
+/*----------------------------------------------------------------------------
+ *                          DEFINITIONS AND MACROS
+ *
+ *----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------*/
+/**
+ * Enable config access to a non-coherent chain for the given bus range.
+ *
+ * @HtNbMethod{::F_SET_CONFIG_ADDR_MAP}
+ *
+ * @param[in]     ConfigMapIndex the map entry to set
+ * @param[in]     SecBus         The secondary bus number to use
+ * @param[in]     SubBus         The subordinate bus number to use
+ * @param[in]     TargetNode     The Node  that shall be the recipient of the traffic
+ * @param[in]     TargetLink     The Link that shall be the recipient of the traffic
+ * @param[in]     State          our global state
+ * @param[in]     Nb             this northbridge
+ */
+VOID
+Fam10SetConfigAddrMap (
+  IN       UINT8       ConfigMapIndex,
+  IN       UINT8       SecBus,
+  IN       UINT8       SubBus,
+  IN       UINT8       TargetNode,
+  IN       UINT8       TargetLink,
+  IN       STATE_DATA  *State,
+  IN       NORTHBRIDGE *Nb
+  )
+{
+  UINT8 CurNode;
+  PCI_ADDR Reg;
+  UINT32 Temp;
+
+  Reg = Nb->MakeLinkBase (TargetNode, TargetLink, Nb);
+
+  ASSERT (SecBus <= SubBus);
+  ASSERT (TargetNode <= State->NodesDiscovered);
+  ASSERT (TargetLink < Nb->MaxLinks);
+  Temp = SecBus;
+  Reg.Address.Register += HTHOST_ISOC_REG;
+  LibAmdPciWriteBits (Reg, 15, 8, &Temp, Nb->ConfigHandle);
+
+  Temp = ((UINT32)SubBus << 24) + ((UINT32)SecBus << 16) + ((UINT32)TargetLink << 8) +
+    ((UINT32)TargetNode << 4) + (UINT32)3;
+  for (CurNode = 0; CurNode < (State->NodesDiscovered + 1); CurNode++) {
+    Reg.AddressValue = MAKE_SBDFO (MakePciSegmentFromNode (CurNode),
+                                   MakePciBusFromNode (CurNode),
+                                   MakePciDeviceFromNode (CurNode),
+                                   CPU_ADDR_FUNC_01,
+                                   REG_ADDR_CONFIG_MAP0_1XE0 + (4 * ConfigMapIndex));
+    LibAmdPciWrite (AccessWidth32, Reg, &Temp, Nb->ConfigHandle);
+  }
+}