superio/ite: Unify it8772f with common code

The it8772f is now configured by the much better common code that is
used for other chips in the family as well. This mainly concerns the EC,
the GPIO functionality was not moved to common as it currently lacks a
sane abstraction in any codebase.

The datasheets of the it8772e(f) and it8728f (for reference) were
studied and verified against the common code, adding exceptions where
needed.

Change-Id: Ic4d9d5460628e444dc20f620179b39c90dbc28c6
Signed-off-by: Joel Linn <jl@conductive.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81310
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>

7 files changed, 41 insertions, 298 deletions

diff --git a/src/superio/ite/common/early_serial.c b/src/superio/ite/common/early_serial.c
index 5ff403f497..552f1104ba 100644
--- a/src/superio/ite/common/early_serial.c
+++ b/src/superio/ite/common/early_serial.c
@@ -15,6 +15,7 @@
 #define ITE_CONFIG_REG_WATCHDOG		0x72 /* watchdog config */
 #define ITE_CONFIG_REG_WDT_TIMEOUT_LSB	0x73 /* watchdog timeout (LSB) */
 #define ITE_CONFIG_REG_WDT_TIMEOUT_MSB	0x74 /* watchdog timeout (MSB) */
+#define ITE_CONFIG_REG_APC_PME_CTL2	0xf4 /* APC_PME Control 2 */
 
 /* Helper procedure */
 static void ite_sio_write(pnp_devfn_t dev, u8 reg, u8 value)
@@ -136,3 +137,23 @@ void ite_kill_watchdog(pnp_devfn_t dev)
 	ite_sio_write(dev, ITE_CONFIG_REG_WDT_TIMEOUT_MSB, 0x00);
 	pnp_exit_conf_state(dev);
 }
+
+/*
+ * Set AC resume to be up to the Southbridge
+ * pass EC_DEV
+ */
+void ite_ac_resume_southbridge(pnp_devfn_t dev)
+{
+	u8 tmp;
+	pnp_enter_conf_state(dev);
+	pnp_set_logical_device(dev);
+	tmp = pnp_read_config(dev, ITE_CONFIG_REG_APC_PME_CTL2);
+	/*
+	 * Set both
+	 * 6: Gate Extra PWRON# Pulse
+	 * 5: PSON# state when 3VSB switched to on
+	 */
+	tmp |= 0x60;
+	pnp_write_config(dev, ITE_CONFIG_REG_APC_PME_CTL2, tmp);
+	pnp_exit_conf_state(dev);
+}
diff --git a/src/superio/ite/common/ite.h b/src/superio/ite/common/ite.h
index 3e9b50289a..19ade4b9b6 100644
--- a/src/superio/ite/common/ite.h
+++ b/src/superio/ite/common/ite.h
@@ -17,6 +17,7 @@ void ite_reg_write(pnp_devfn_t dev, u8 reg, u8 value);
 void ite_enable_3vsbsw(pnp_devfn_t dev);
 void ite_delay_pwrgd3(pnp_devfn_t dev);
 void ite_kill_watchdog(pnp_devfn_t dev);
+void ite_ac_resume_southbridge(pnp_devfn_t dev);
 
 void pnp_enter_conf_state(pnp_devfn_t dev);
 void pnp_exit_conf_state(pnp_devfn_t dev);
diff --git a/src/superio/ite/it8772f/Kconfig b/src/superio/ite/it8772f/Kconfig
index 194c73618a..3137cf0d35 100644
--- a/src/superio/ite/it8772f/Kconfig
+++ b/src/superio/ite/it8772f/Kconfig
@@ -3,3 +3,9 @@
 config SUPERIO_ITE_IT8772F
 	bool
 	select SUPERIO_ITE_COMMON_PRE_RAM
+	select SUPERIO_ITE_ENV_CTRL
+	select SUPERIO_ITE_ENV_CTRL_7BIT_SLOPE_REG
+	select SUPERIO_ITE_ENV_CTRL_8BIT_PWM
+	select SUPERIO_ITE_ENV_CTRL_EXT_ANY_TMPIN
+	select SUPERIO_ITE_ENV_CTRL_NO_FULLSPEED_SETTING
+	select SUPERIO_ITE_ENV_CTRL_PWM_FREQ2
diff --git a/src/superio/ite/it8772f/chip.h b/src/superio/ite/it8772f/chip.h
index eb3ccd2a97..1169b4ba5d 100644
--- a/src/superio/ite/it8772f/chip.h
+++ b/src/superio/ite/it8772f/chip.h
@@ -3,12 +3,11 @@
 #ifndef SUPERIO_ITE_IT8772F_CHIP_H
 #define SUPERIO_ITE_IT8772F_CHIP_H
 
-#include <device/device.h>
-#include <types.h>
-
-#include "it8772f.h"
+#include <superio/ite/common/env_ctrl_chip.h>
 
 struct superio_ite_it8772f_config {
+	struct ite_ec_config ec;
+
 	/* GPIO SimpleIO register values via devicetree.cb */
 	u8 gpio_set1;
 	u8 gpio_set2;
@@ -18,31 +17,6 @@ struct superio_ite_it8772f_config {
 	u8 gpio_set6;
 
 	bool skip_keyboard;
-
-	/*
-	 * Enable external temperature sensor to use PECI GetTemp()
-	 * command and store in register TMPIN 1, 2, or 3.
-	 */
-	u8 peci_tmpin;
-
-	/*
-	 * Enable thermal mode on tmpinx.
-	 */
-	enum thermal_mode tmpin1_mode;
-	enum thermal_mode tmpin2_mode;
-
-	/*
-	 * Enable a FAN for software control.
-	 */
-	bool fan1_enable;
-	bool fan2_enable;
-	bool fan3_enable;
-
-	/*
-	 * Default FAN speed
-	 */
-	u8 fan2_speed;
-	u8 fan3_speed;
 };
 
 #endif /* SUPERIO_ITE_IT8772F_CHIP_H */
diff --git a/src/superio/ite/it8772f/early_init.c b/src/superio/ite/it8772f/early_init.c
index e41b206e8c..efbb035aab 100644
--- a/src/superio/ite/it8772f/early_init.c
+++ b/src/superio/ite/it8772f/early_init.c
@@ -5,10 +5,13 @@
 #include <device/pnp_ops.h>
 
 #include "it8772f.h"
+#include "../common/ite.h"
+
+#define IT8772F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */
 
 /* NOTICE: This file is deprecated, use ite/common instead */
 
-void it8772f_enter_conf(pnp_devfn_t dev)
+static void it8772f_enter_conf(pnp_devfn_t dev)
 {
 	u16 port = dev >> 8;
 
@@ -18,27 +21,18 @@ void it8772f_enter_conf(pnp_devfn_t dev)
 	outb((port == 0x4e) ? 0xaa : 0x55, port);
 }
 
-void it8772f_exit_conf(pnp_devfn_t dev)
+static void it8772f_exit_conf(pnp_devfn_t dev)
 {
 	pnp_write_config(dev, IT8772F_CONFIG_REG_CC, 0x02);
 }
 
-/* Set AC resume to be up to the Southbridge */
-void it8772f_ac_resume_southbridge(pnp_devfn_t dev)
-{
-	it8772f_enter_conf(dev);
-	pnp_write_config(dev, IT8772F_CONFIG_REG_LDN, IT8772F_EC);
-	pnp_write_config(dev, PNP_IDX_MSC4, 0x60);
-	it8772f_exit_conf(dev);
-}
-
 /* Configure a set of GPIOs */
 void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity,
 			u8 pullup, u8 output, u8 enable)
 {
 	set--; /* Set 1 is offset 0 */
 	it8772f_enter_conf(dev);
-	pnp_write_config(dev, IT8772F_CONFIG_REG_LDN, IT8772F_GPIO);
+	pnp_set_logical_device(dev);
 	if (set < 5) {
 		pnp_write_config(dev, GPIO_REG_SELECT(set), select);
 		pnp_write_config(dev, GPIO_REG_ENABLE(set), enable);
@@ -55,7 +49,7 @@ void it8772f_gpio_led(pnp_devfn_t dev,int set, u8 select, u8 polarity, u8 pullup
 {
 	set--; /* Set 1 is offset 0 */
 	it8772f_enter_conf(dev);
-	pnp_write_config(dev, IT8772F_CONFIG_REG_LDN, IT8772F_GPIO);
+	pnp_set_logical_device(dev);
 	if (set < 5) {
 		pnp_write_config(dev, IT8772F_GPIO_LED_BLINK1_PINMAP, led_pin_map);
 		pnp_write_config(dev, IT8772F_GPIO_LED_BLINK1_CONTROL, led_freq);
diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h
index 38cfe3b20e..4df21c58cb 100644
--- a/src/superio/ite/it8772f/it8772f.h
+++ b/src/superio/ite/it8772f/it8772f.h
@@ -3,13 +3,6 @@
 #ifndef SUPERIO_ITE_IT8772F_H
 #define SUPERIO_ITE_IT8772F_H
 
-/* Supported thermal mode on TMPINx */
-enum thermal_mode {
-	THERMAL_MODE_DISABLED	= 0,
-	THERMAL_DIODE,
-	THERMAL_RESISTOR,
-};
-
 #define IT8772F_FDC  0x00 /* Floppy disk controller */
 #define IT8772F_SP1  0x01 /* Com1 */
 #define IT8772F_EC   0x04 /* Environment controller */
@@ -18,71 +11,6 @@ enum thermal_mode {
 #define IT8772F_GPIO 0x07 /* GPIO */
 #define IT8772F_IR   0x0a /* Consumer IR */
 
-/* Environmental Controller interface */
-#define IT8772F_CONFIGURATION			0x00
-#define IT8772F_INTERFACE_SELECT		0x0a
-#define  IT8772F_INTERFACE_PSEUDO_EOC		(1 << 7)
-#define  IT8772F_INTERFACE_SMB_ENABLE		(1 << 6)
-#define  IT8772F_INTERFACE_SEL_DISABLE		(0 << 4)
-#define  IT8772F_INTERFACE_SEL_SST_SLAVE	(1 << 4)
-#define  IT8772F_INTERFACE_SEL_PECI		(2 << 4)
-#define  IT8772F_INTERFACE_SEL_SST_HOST		(3 << 4)
-#define  IT8772F_INTERFACE_CLOCK_32MHZ		(0 << 3)
-#define  IT8772F_INTERFACE_CLOCK_24MHZ		(1 << 3)
-#define  IT8772F_INTERFACE_SPEED_TOLERANCE	(1 << 2)
-#define  IT8772F_INTERFACE_PECI_AWFCS		(1 << 0)
-#define IT8772F_FAN_TAC2_READ			0x0e
-#define IT8772F_FAN_TAC3_READ			0x0f
-#define IT8772F_FAN_MAIN_CTL			0x13
-#define  IT8772F_FAN_MAIN_CTL_TAC_SMART(x)	(1 << ((x)-1))
-#define  IT8772F_FAN_MAIN_CTL_TAC_EN(x)		(1 << ((x)+3))
-#define IT8772F_FAN_CTL_MODE			0x14
-#define  IT8772F_FAN_CTL_ON(x)			(1 << ((x)-1))
-#define  IT8772F_FAN_PWM_MIN_DUTY		(1 << 3)
-#define  IT8772F_FAN_PWM_CLOCK_48MHZ		(0 << 4)
-#define  IT8772F_FAN_PWM_CLOCK_24MHZ		(1 << 4)
-#define  IT8772F_FAN_PWM_CLOCK_8MHZ		(3 << 4)
-#define  IT8772F_FAN_PWM_CLOCK_6MHZ		(4 << 4)
-#define  IT8772F_FAN_PWM_CLOCK_3MHZ		(5 << 4)
-#define  IT8772F_FAN_PWM_CLOCK_1_5MHZ		(6 << 4)
-#define  IT8772F_FAN_PWM_CLOCK_51KHZ		(7 << 4)
-#define  IT8772F_FAN_CTL_POLARITY_LOW		(0 << 7)
-#define  IT8772F_FAN_CTL_POLARITY_HIGH		(1 << 7)
-#define IT8772F_FAN_CTL2_PWM_MODE		0x16
-#define IT8772F_FAN_CTL3_PWM_MODE		0x17
-#define  IT8772F_FAN_CTL_PWM_MODE_SOFTWARE	(0 << 7)
-#define  IT8772F_FAN_CTL_PWM_MODE_AUTOMATIC	(1 << 7)
-#define IT8772F_ADC_TEMP_CHANNEL_ENABLE		0x51
-#define IT8772F_FAN_CTL2_PWM_START		0x6b
-#define IT8772F_FAN_CTL2_AUTO_MODE		0x6c
-#define IT8772F_FAN_CTL3_PWM_START		0x73
-#define IT8772F_FAN_CTL3_AUTO_MODE		0x74
-#define  IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS	(0 << 7)
-#define  IT8772F_FAN_CTL_AUTO_SMOOTHING_EN	(1 << 7)
-#define IT8772F_EXTEMP_STATUS			0x88
-#define  IT8772F_EXTEMP_STATUS_HOST_BUSY	(1 << 0)
-#define IT8772F_EXTEMP_ADDRESS			0x89
-#define IT8772F_EXTEMP_WRITE_LENGTH		0x8a
-#define IT8772F_EXTEMP_READ_LENGTH		0x8b
-#define IT8772F_EXTEMP_COMMAND			0x8c
-#define IT8772F_EXTEMP_WRITE_DATA_2		0x8d
-#define IT8772F_EXTEMP_CONTROL			0x8e
-#define  IT8772F_EXTEMP_CONTROL_AUTO_32HZ	(0 << 6)
-#define  IT8772F_EXTEMP_CONTROL_AUTO_16HZ	(1 << 6)
-#define  IT8772F_EXTEMP_CONTROL_AUTO_8HZ	(2 << 6)
-#define  IT8772F_EXTEMP_CONTROL_AUTO_4HZ	(3 << 6)
-#define  IT8772F_EXTEMP_CONTROL_AUTO_START	(1 << 5)
-#define  IT8772F_EXTEMP_CONTROL_AUTO_ABORT	(1 << 4)
-#define  IT8772F_EXTEMP_CONTROL_AUTO_TWO_DOMAIN	(1 << 3)
-#define  IT8772F_EXTEMP_CONTROL_CONTENTION	(1 << 2)
-#define  IT8772F_EXTEMP_CONTROL_SST_IDLE_HIGH	(1 << 1)
-#define  IT8772F_EXTEMP_CONTROL_START		(1 << 0)
-
-/* Standard PECI GetTemp */
-#define PECI_CLIENT_ADDRESS			0x30
-#define PECI_GETTEMP_COMMAND			0x01
-#define PECI_GETTEMP_WRITE_LENGTH		0x01
-#define PECI_GETTEMP_READ_LENGTH		0x02
 
 /* GPIO interface */
 #define IT8772F_GPIO_LED_BLINK1_PINMAP		0xf8
@@ -115,17 +43,9 @@ enum thermal_mode {
 #include <device/pnp_type.h>
 #include <stdint.h>
 
-void it8772f_ac_resume_southbridge(pnp_devfn_t dev);
 void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity,
 			u8 pullup, u8 output, u8 enable);
 
-/* FIXME: should be static so will be removed later.. */
-/* Global configuration registers. */
-#define IT8772F_CONFIG_REG_CC        0x02 /* Configure Control (write-only). */
-#define IT8772F_CONFIG_REG_LDN       0x07 /* Logical Device Number. */
-
-void it8772f_enter_conf(pnp_devfn_t dev);
-void it8772f_exit_conf(pnp_devfn_t dev);
 void it8772f_gpio_led(pnp_devfn_t dev, int set, u8 select, u8 polarity, u8 pullup,
 			u8 output, u8 enable, u8 led_pin_map, u8 led_freq);
 
diff --git a/src/superio/ite/it8772f/superio.c b/src/superio/ite/it8772f/superio.c
index 177136818c..268df0a517 100644
--- a/src/superio/ite/it8772f/superio.c
+++ b/src/superio/ite/it8772f/superio.c
@@ -4,6 +4,7 @@
 #include <device/pnp.h>
 #include <console/console.h>
 #include <pc80/keyboard.h>
+#include <superio/ite/common/env_ctrl.h>
 #include <arch/io.h>
 #include <delay.h>
 #include <superio/conf_mode.h>
@@ -12,155 +13,6 @@
 #include "chip.h" /* FIXME */
 #include "it8772f.h"
 
-/* FIXME: see if the common ITE environment controller code can be used here */
-
-static void it8772f_extemp_force_idle_status(struct resource *res)
-{
-	u8 reg;
-	int retries = 10;
-
-	/* Wait up to 10ms for non-busy state. */
-	while (retries > 0) {
-		reg = pnp_read_hwm5_index(res->base, IT8772F_EXTEMP_STATUS);
-
-		if ((reg & IT8772F_EXTEMP_STATUS_HOST_BUSY) == 0x0)
-			break;
-
-		retries--;
-
-		mdelay(1);
-	}
-
-	if (retries == 0 && (reg & IT8772F_EXTEMP_STATUS_HOST_BUSY) == 0x1) {
-		/*
-		 * SIO is busy due to unfinished peci transaction.
-		 * Re-configure Register 0x8E to terminate processes.
-		 */
-		pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_CONTROL,
-			IT8772F_EXTEMP_CONTROL_AUTO_4HZ |
-			IT8772F_EXTEMP_CONTROL_AUTO_START);
-	}
-}
-
-/*
- * Setup External Temperature to read via PECI into TMPINx register
- */
-static void it8772f_enable_peci(struct resource *res, int tmpin)
-{
-	if (tmpin < 1 || tmpin > 3)
-		return;
-
-	/* Enable PECI interface */
-	pnp_write_hwm5_index(res->base, IT8772F_INTERFACE_SELECT,
-			   IT8772F_INTERFACE_SEL_PECI |
-			   IT8772F_INTERFACE_SPEED_TOLERANCE);
-
-	/* Setup External Temperature using PECI GetTemp */
-	pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_ADDRESS,
-			   PECI_CLIENT_ADDRESS);
-	pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_COMMAND,
-			   PECI_GETTEMP_COMMAND);
-	pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_WRITE_LENGTH,
-			   PECI_GETTEMP_WRITE_LENGTH);
-	pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_READ_LENGTH,
-			   PECI_GETTEMP_READ_LENGTH);
-	pnp_write_hwm5_index(res->base, IT8772F_EXTEMP_CONTROL,
-			   IT8772F_EXTEMP_CONTROL_AUTO_4HZ |
-			   IT8772F_EXTEMP_CONTROL_AUTO_START);
-
-	/* External Temperature reported in TMPINx register */
-	pnp_write_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
-			   (tmpin & 3) << 6);
-}
-
-/*
- * Set up External Temperature to read via thermal diode/resistor
- * into TMPINx register
- */
-static void it8772f_enable_tmpin(struct resource *res, int tmpin,
-				enum thermal_mode mode)
-{
-	u8 reg;
-
-	if (tmpin != 1 && tmpin != 2)
-		return;
-
-	reg = pnp_read_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE);
-
-	switch (mode) {
-	case THERMAL_DIODE:
-		/* Thermal Diode Mode */
-		pnp_write_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
-				   reg | tmpin);
-		break;
-	case THERMAL_RESISTOR:
-		/* Thermal Resistor Mode */
-		pnp_write_hwm5_index(res->base, IT8772F_ADC_TEMP_CHANNEL_ENABLE,
-				   reg | (tmpin << 3));
-		break;
-	default:
-		printk(BIOS_ERR, "Unsupported thermal mode 0x%x on TMPIN%d\n",
-			mode, tmpin);
-		return;
-	}
-
-	reg = pnp_read_hwm5_index(res->base, IT8772F_CONFIGURATION);
-
-	/* Enable the startup of monitoring operation */
-	pnp_write_hwm5_index(res->base, IT8772F_CONFIGURATION, reg | 0x01);
-}
-
-/*
- * Setup a FAN PWM interface for software control
- */
-static void it8772f_enable_fan(struct resource *res, int fan, u8 fan_speed)
-{
-	u8 reg;
-
-	if (fan < 1 || fan > 3)
-		return;
-
-	/* Enable 6MHz (23.43kHz PWM) active high output */
-	reg = pnp_read_hwm5_index(res->base, IT8772F_FAN_CTL_MODE);
-	reg |= IT8772F_FAN_CTL_ON(fan) |
-		IT8772F_FAN_PWM_CLOCK_6MHZ |
-		IT8772F_FAN_CTL_POLARITY_HIGH;
-	pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL_MODE, reg);
-
-	/* Enable output in smart mode */
-	reg = pnp_read_hwm5_index(res->base, IT8772F_FAN_MAIN_CTL);
-	reg |= IT8772F_FAN_MAIN_CTL_TAC_SMART(fan);
-	reg |= IT8772F_FAN_MAIN_CTL_TAC_EN(fan);
-	pnp_write_hwm5_index(res->base, IT8772F_FAN_MAIN_CTL, reg);
-
-	switch (fan) {
-	case 2:
-		/* Enable software operation */
-		pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL2_PWM_MODE,
-				   IT8772F_FAN_CTL_PWM_MODE_SOFTWARE);
-		/* Disable Smoothing */
-		pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL2_AUTO_MODE,
-				   IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS);
-		/* Set a default fan speed */
-		if (fan_speed)
-			pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL2_PWM_START,
-				   fan_speed);
-		break;
-	case 3:
-		/* Enable software operation */
-		pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL3_PWM_MODE,
-				   IT8772F_FAN_CTL_PWM_MODE_SOFTWARE);
-		/* Disable Smoothing */
-		pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL3_AUTO_MODE,
-				   IT8772F_FAN_CTL_AUTO_SMOOTHING_DIS);
-		/* Set a default fan speed */
-		if (fan_speed)
-			pnp_write_hwm5_index(res->base, IT8772F_FAN_CTL3_PWM_START,
-				   fan_speed);
-		break;
-	}
-}
-
 static void it8772f_init(struct device *dev)
 {
 	struct superio_ite_it8772f_config *conf = dev->chip_info;
@@ -172,34 +24,9 @@ static void it8772f_init(struct device *dev)
 	switch (dev->path.pnp.device) {
 	case IT8772F_EC:
 		res = probe_resource(dev, PNP_IDX_IO0);
-		if (!res)
+		if (!conf || !res)
 			break;
-
-		/* Enable PECI if configured */
-		it8772f_enable_peci(res, conf->peci_tmpin);
-
-		/* Enable HWM if configured */
-		if (conf->tmpin1_mode != THERMAL_MODE_DISABLED)
-			it8772f_enable_tmpin(res, 1, conf->tmpin1_mode);
-		if (conf->tmpin2_mode != THERMAL_MODE_DISABLED)
-			it8772f_enable_tmpin(res, 2, conf->tmpin2_mode);
-
-		/* Enable FANx if configured */
-		if (conf->fan1_enable)
-			it8772f_enable_fan(res, 1, 0);
-		if (conf->fan2_enable)
-			it8772f_enable_fan(res, 2,
-				conf->fan2_speed ? conf->fan2_speed : 0x80);
-		if (conf->fan3_enable)
-			it8772f_enable_fan(res, 3,
-				conf->fan3_speed ? conf->fan3_speed : 0x80);
-
-		/*
-		 * System may get wrong temperature data when SIO is in
-		 * busy state. Therefore, check the status and terminate
-		 * processes if needed.
-		 */
-		it8772f_extemp_force_idle_status(res);
+		ite_ec_init(res->base, &conf->ec);
 		break;
 	case IT8772F_GPIO:
 		/* Set GPIO output levels */