diff options
| author | Edward O'Callaghan <eocallaghan@alterapraxis.com> | 2014-07-09 20:26:25 +1000 |
|---|---|---|
| committer | Edward O'Callaghan <eocallaghan@alterapraxis.com> | 2014-10-27 12:50:33 +0100 |
| commit | 85836c2215498ff18746b3a7e85ed684cf2e119e (patch) | |
| tree | 1b774a8f00fda2e0ccc1939105e5f4f2c7c8abe3 /src/superio/smsc/lpc47n217 | |
| parent | 377fd754932922e8c907994ef3e4d8ab925c6132 (diff) | |
superio: Use 'pnp_devfn_t' over 'device_t' in romstage component
The romstage component of Super I/O support is in fact written around
passing a lower and upper half packed integer. We currently have two
typedef's for this, 'device_t' and 'pnp_devfn_t'. We wish to make use of
'pnp_devfn_t' over 'device_t' as 'device_t' changes it's typedef in the
ramstage context and so is really a conflicting definition. This helps
solve problems down the road to having the 'real' 'device_t' definition
usable in romstage later.
This follows on from the rational given in:
c2956e7 device/pci_early.c: Mixes up variants of a typedefs to 'u32'
Change-Id: Ia9f238ebb944f9fe7b274621ee0c09a6de288a76
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/6231
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
Diffstat (limited to 'src/superio/smsc/lpc47n217')
| -rw-r--r-- | src/superio/smsc/lpc47n217/early_serial.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/src/superio/smsc/lpc47n217/early_serial.c b/src/superio/smsc/lpc47n217/early_serial.c index 451628a449..7405f3296c 100644 --- a/src/superio/smsc/lpc47n217/early_serial.c +++ b/src/superio/smsc/lpc47n217/early_serial.c @@ -24,13 +24,13 @@ #include <assert.h> #include "lpc47n217.h" -static void pnp_enter_conf_state(device_t dev) +static void pnp_enter_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0x55, port); } -static void pnp_exit_conf_state(device_t dev) +static void pnp_exit_conf_state(pnp_devfn_t dev) { u16 port = dev >> 8; outb(0xaa, port); @@ -42,7 +42,7 @@ static void pnp_exit_conf_state(device_t dev) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param iobase Base I/O port for the logical device. */ -static void lpc47n217_pnp_set_iobase(device_t dev, u16 iobase) +static void lpc47n217_pnp_set_iobase(pnp_devfn_t dev, u16 iobase) { /* LPC47N217 requires base ports to be a multiple of 4. */ ASSERT(!(iobase & 0x3)); @@ -74,7 +74,7 @@ static void lpc47n217_pnp_set_iobase(device_t dev, u16 iobase) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param enable 0 to disable, anythig else to enable. */ -static void lpc47n217_pnp_set_enable(device_t dev, int enable) +static void lpc47n217_pnp_set_enable(pnp_devfn_t dev, int enable) { u8 power_register = 0, power_mask = 0, current_power, new_power; @@ -109,7 +109,7 @@ static void lpc47n217_pnp_set_enable(device_t dev, int enable) * @param dev High 8 bits = Super I/O port, low 8 bits = logical device number. * @param iobase Processor I/O port address to assign to this serial device. */ -static void lpc47n217_enable_serial(device_t dev, u16 iobase) +static void lpc47n217_enable_serial(pnp_devfn_t dev, u16 iobase) { /* * NOTE: Cannot use pnp_set_XXX() here because they assume chip |