superio/hwm5_conf: factor out HWM access from ITE env_ctrl

Nuvoton and Winbond use the same off-by-5 indirect address space to
access their hardware monitor/environment controller in the SIO chip, so
move this to a common location and replace the inb/outb calls with the
corresponding inline functions from device/pnp.h

Change-Id: I20606313d0cc9cf74be7dca30bc4550059125fe1
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>

1 files changed, 51 insertions, 71 deletions

diff --git a/src/superio/ite/common/env_ctrl.c b/src/superio/ite/common/env_ctrl.c
index 1b93036845..2f2942be7b 100644
--- a/src/superio/ite/common/env_ctrl.c
+++ b/src/superio/ite/common/env_ctrl.c
@@ -21,22 +21,11 @@
 #include <arch/io.h>
 #include <console/console.h>
 #include <delay.h>
+#include <superio/hwm5_conf.h>
 
 #include "env_ctrl.h"
 #include "env_ctrl_chip.h"
 
-static inline u8 ite_ec_read(const u16 base, const u8 addr)
-{
-	outb(addr, base + 5);
-	return inb(base + 6);
-}
-
-static inline void ite_ec_write(const u16 base, const u8 addr, const u8 value)
-{
-	outb(addr, base + 5);
-	outb(value, base + 6);
-}
-
 static void extemp_force_idle_status(const u16 base)
 {
 	u8 reg;
@@ -44,7 +33,7 @@ static void extemp_force_idle_status(const u16 base)
 
 	/* Wait up to 10ms for non-busy state. */
 	while (retries > 0) {
-		reg = ite_ec_read(base, ITE_EC_EXTEMP_STATUS);
+		reg = pnp_read_hwm5_index(base, ITE_EC_EXTEMP_STATUS);
 
 		if ((reg & ITE_EC_EXTEMP_STATUS_HOST_BUSY) == 0x0)
 			break;
@@ -59,9 +48,8 @@ static void extemp_force_idle_status(const u16 base)
 		 * SIO is busy due to unfinished peci transaction.
 		 * Re-configure Register 0x8E to terminate processes.
 		 */
-		ite_ec_write(base, ITE_EC_EXTEMP_CONTROL,
-			ITE_EC_EXTEMP_CTRL_AUTO_4HZ |
-			ITE_EC_EXTEMP_CTRL_AUTO_START);
+		pnp_write_hwm5_index(base, ITE_EC_EXTEMP_CONTROL,
+			ITE_EC_EXTEMP_CTRL_AUTO_4HZ | ITE_EC_EXTEMP_CTRL_AUTO_START);
 	}
 }
 
@@ -71,22 +59,16 @@ static void extemp_force_idle_status(const u16 base)
 static void enable_peci(const u16 base)
 {
 	/* Enable PECI interface */
-	ite_ec_write(base, ITE_EC_INTERFACE_SELECT,
-			   ITE_EC_INTERFACE_SEL_PECI |
-			   ITE_EC_INTERFACE_SPEED_TOLERANCE);
+	pnp_write_hwm5_index(base, ITE_EC_INTERFACE_SELECT,
+			   ITE_EC_INTERFACE_SEL_PECI | ITE_EC_INTERFACE_SPEED_TOLERANCE);
 
 	/* Setup External Temperature using PECI GetTemp */
-	ite_ec_write(base, ITE_EC_EXTEMP_ADDRESS,
-			   PECI_CLIENT_ADDRESS);
-	ite_ec_write(base, ITE_EC_EXTEMP_COMMAND,
-			   PECI_GETTEMP_COMMAND);
-	ite_ec_write(base, ITE_EC_EXTEMP_WRITE_LENGTH,
-			   PECI_GETTEMP_WRITE_LENGTH);
-	ite_ec_write(base, ITE_EC_EXTEMP_READ_LENGTH,
-			   PECI_GETTEMP_READ_LENGTH);
-	ite_ec_write(base, ITE_EC_EXTEMP_CONTROL,
-			   ITE_EC_EXTEMP_CTRL_AUTO_4HZ |
-			   ITE_EC_EXTEMP_CTRL_AUTO_START);
+	pnp_write_hwm5_index(base, ITE_EC_EXTEMP_ADDRESS, PECI_CLIENT_ADDRESS);
+	pnp_write_hwm5_index(base, ITE_EC_EXTEMP_COMMAND, PECI_GETTEMP_COMMAND);
+	pnp_write_hwm5_index(base, ITE_EC_EXTEMP_WRITE_LENGTH, PECI_GETTEMP_WRITE_LENGTH);
+	pnp_write_hwm5_index(base, ITE_EC_EXTEMP_READ_LENGTH, PECI_GETTEMP_READ_LENGTH);
+	pnp_write_hwm5_index(base, ITE_EC_EXTEMP_CONTROL,
+		ITE_EC_EXTEMP_CTRL_AUTO_4HZ | ITE_EC_EXTEMP_CTRL_AUTO_START);
 }
 
 /*
@@ -98,7 +80,7 @@ static void enable_tmpin(const u16 base, const u8 tmpin,
 {
 	u8 reg;
 
-	reg = ite_ec_read(base, ITE_EC_ADC_TEMP_CHANNEL_ENABLE);
+	reg = pnp_read_hwm5_index(base, ITE_EC_ADC_TEMP_CHANNEL_ENABLE);
 
 	switch (conf->mode) {
 	case THERMAL_PECI:
@@ -122,26 +104,25 @@ static void enable_tmpin(const u16 base, const u8 tmpin,
 		return;
 	}
 
-	ite_ec_write(base, ITE_EC_ADC_TEMP_CHANNEL_ENABLE, reg);
+	pnp_write_hwm5_index(base, ITE_EC_ADC_TEMP_CHANNEL_ENABLE, reg);
 
 	/* Set temperature offsets */
 	if (conf->mode != THERMAL_RESISTOR) {
-		reg = ite_ec_read(base, ITE_EC_BEEP_ENABLE);
+		reg = pnp_read_hwm5_index(base, ITE_EC_BEEP_ENABLE);
 		reg |= ITE_EC_TEMP_ADJUST_WRITE_ENABLE;
-		ite_ec_write(base, ITE_EC_BEEP_ENABLE, reg);
-		ite_ec_write(base, ITE_EC_TEMP_ADJUST[tmpin-1], conf->offset);
+		pnp_write_hwm5_index(base, ITE_EC_BEEP_ENABLE, reg);
+		pnp_write_hwm5_index(base, ITE_EC_TEMP_ADJUST[tmpin-1], conf->offset);
 	}
 
 	/* Set temperature limits */
 	u8 max = conf->max;
-	ite_ec_write(base, ITE_EC_HIGH_TEMP_LIMIT(tmpin),
-		     max ? max : 127);
-	ite_ec_write(base, ITE_EC_LOW_TEMP_LIMIT(tmpin), conf->min);
+	pnp_write_hwm5_index(base, ITE_EC_HIGH_TEMP_LIMIT(tmpin), max ? max : 127);
+	pnp_write_hwm5_index(base, ITE_EC_LOW_TEMP_LIMIT(tmpin), conf->min);
 
 	/* Enable the startup of monitoring operation */
-	reg = ite_ec_read(base, ITE_EC_CONFIGURATION);
+	reg = pnp_read_hwm5_index(base, ITE_EC_CONFIGURATION);
 	reg |= ITE_EC_CONFIGURATION_START;
-	ite_ec_write(base, ITE_EC_CONFIGURATION, reg);
+	pnp_write_hwm5_index(base, ITE_EC_CONFIGURATION, reg);
 }
 
 static void fan_smartconfig(const u16 base, const u8 fan,
@@ -177,20 +158,19 @@ static void fan_smartconfig(const u16 base, const u8 fan,
 		if (conf->smoothing)
 			pwm_auto |= ITE_EC_FAN_CTL_AUTO_SMOOTHING_EN;
 
-		ite_ec_write(base, ITE_EC_FAN_CTL_TEMP_LIMIT_OFF(fan),
-			     conf->tmp_off);
-		ite_ec_write(base, ITE_EC_FAN_CTL_TEMP_LIMIT_START(fan),
-			     conf->tmp_start);
+		pnp_write_hwm5_index(base, ITE_EC_FAN_CTL_TEMP_LIMIT_OFF(fan), conf->tmp_off);
+		pnp_write_hwm5_index(base, ITE_EC_FAN_CTL_TEMP_LIMIT_START(fan),
+			conf->tmp_start);
 		/* Full speed above 127°C by default */
-		ite_ec_write(base, ITE_EC_FAN_CTL_TEMP_LIMIT_FULL(fan),
-			     conf->tmp_full ? conf->tmp_full : 127);
-		ite_ec_write(base, ITE_EC_FAN_CTL_DELTA_TEMP(fan),
-			     ITE_EC_FAN_CTL_DELTA_TEMP_INTRVL(conf->tmp_delta));
+		pnp_write_hwm5_index(base, ITE_EC_FAN_CTL_TEMP_LIMIT_FULL(fan),
+			conf->tmp_full ? conf->tmp_full : 127);
+		pnp_write_hwm5_index(base, ITE_EC_FAN_CTL_DELTA_TEMP(fan),
+			ITE_EC_FAN_CTL_DELTA_TEMP_INTRVL(conf->tmp_delta));
 	}
 
-	ite_ec_write(base, ITE_EC_FAN_CTL_PWM_CONTROL(fan), pwm_ctrl);
-	ite_ec_write(base, ITE_EC_FAN_CTL_PWM_START(fan), pwm_start);
-	ite_ec_write(base, ITE_EC_FAN_CTL_PWM_AUTO(fan), pwm_auto);
+	pnp_write_hwm5_index(base, ITE_EC_FAN_CTL_PWM_CONTROL(fan), pwm_ctrl);
+	pnp_write_hwm5_index(base, ITE_EC_FAN_CTL_PWM_START(fan), pwm_start);
+	pnp_write_hwm5_index(base, ITE_EC_FAN_CTL_PWM_AUTO(fan), pwm_auto);
 }
 
 static void enable_fan(const u16 base, const u8 fan,
@@ -205,39 +185,39 @@ static void enable_fan(const u16 base, const u8 fan,
 
 	/* FAN_CTL2 might have its own frequency setting */
 	if (CONFIG(SUPERIO_ITE_ENV_CTRL_PWM_FREQ2) && fan == 2) {
-		reg = ite_ec_read(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE);
+		reg = pnp_read_hwm5_index(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE);
 		reg &= ~ITE_EC_FAN_PWM_CLOCK_MASK;
 		reg |= ITE_EC_FAN_PWM_DEFAULT_CLOCK;
-		ite_ec_write(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE, reg);
+		pnp_write_hwm5_index(base, ITE_EC_ADC_TEMP_EXTRA_CHANNEL_ENABLE, reg);
 	}
 
 	if (conf->mode >= FAN_SMART_SOFTWARE) {
 		fan_smartconfig(base, fan, conf->mode, &conf->smart);
 	} else {
-		reg = ite_ec_read(base, ITE_EC_FAN_CTL_MODE);
+		reg = pnp_read_hwm5_index(base, ITE_EC_FAN_CTL_MODE);
 		if (conf->mode == FAN_MODE_ON)
 			reg |= ITE_EC_FAN_CTL_ON(fan);
 		else
 			reg &= ~ITE_EC_FAN_CTL_ON(fan);
-		ite_ec_write(base, ITE_EC_FAN_CTL_MODE, reg);
+		pnp_write_hwm5_index(base, ITE_EC_FAN_CTL_MODE, reg);
 	}
 
 	if (CONFIG(SUPERIO_ITE_ENV_CTRL_FAN16_CONFIG)
 	    && conf->mode >= FAN_MODE_ON) {
-		reg = ite_ec_read(base, ITE_EC_FAN_TAC_COUNTER_ENABLE);
+		reg = pnp_read_hwm5_index(base, ITE_EC_FAN_TAC_COUNTER_ENABLE);
 		reg |= ITE_EC_FAN_TAC_16BIT_ENABLE(fan);
-		ite_ec_write(base, ITE_EC_FAN_TAC_COUNTER_ENABLE, reg);
+		pnp_write_hwm5_index(base, ITE_EC_FAN_TAC_COUNTER_ENABLE, reg);
 	}
 
 	if (CONFIG(SUPERIO_ITE_ENV_CTRL_5FANS) && fan > 3) {
-		reg = ite_ec_read(base, ITE_EC_FAN_SEC_CTL);
+		reg = pnp_read_hwm5_index(base, ITE_EC_FAN_SEC_CTL);
 		if (conf->mode >= FAN_MODE_ON)
 			reg |= ITE_EC_FAN_SEC_CTL_TAC_EN(fan);
 		else
 			reg &= ~ITE_EC_FAN_SEC_CTL_TAC_EN(fan);
-		ite_ec_write(base, ITE_EC_FAN_SEC_CTL, reg);
+		pnp_write_hwm5_index(base, ITE_EC_FAN_SEC_CTL, reg);
 	} else {
-		reg = ite_ec_read(base, ITE_EC_FAN_MAIN_CTL);
+		reg = pnp_read_hwm5_index(base, ITE_EC_FAN_MAIN_CTL);
 		if (conf->mode >= FAN_MODE_ON)
 			reg |= ITE_EC_FAN_MAIN_CTL_TAC_EN(fan);
 		else
@@ -250,7 +230,7 @@ static void enable_fan(const u16 base, const u8 fan,
 			else
 				reg &= ~ITE_EC_FAN_MAIN_CTL_SMART(fan);
 		}
-		ite_ec_write(base, ITE_EC_FAN_MAIN_CTL, reg);
+		pnp_write_hwm5_index(base, ITE_EC_FAN_MAIN_CTL, reg);
 	}
 }
 
@@ -261,20 +241,20 @@ static void enable_beeps(const u16 base, const struct ite_ec_config *const conf)
 
 	if (conf->tmpin_beep) {
 		reg |= ITE_EC_BEEP_ON_TMP_LIMIT;
-		ite_ec_write(base, ITE_EC_BEEP_FREQ_DIV_OF_TMPIN, freq);
+		pnp_write_hwm5_index(base, ITE_EC_BEEP_FREQ_DIV_OF_TMPIN, freq);
 	}
 	if (conf->fan_beep) {
 		reg |= ITE_EC_BEEP_ON_FAN_LIMIT;
-		ite_ec_write(base, ITE_EC_BEEP_FREQ_DIV_OF_FAN, freq);
+		pnp_write_hwm5_index(base, ITE_EC_BEEP_FREQ_DIV_OF_FAN, freq);
 	}
 	if (conf->vin_beep) {
 		reg |= ITE_EC_BEEP_ON_VIN_LIMIT;
-		ite_ec_write(base, ITE_EC_BEEP_FREQ_DIV_OF_VIN, freq);
+		pnp_write_hwm5_index(base, ITE_EC_BEEP_FREQ_DIV_OF_VIN, freq);
 	}
 
 	if (reg) {
-		reg |= ite_ec_read(base, ITE_EC_BEEP_ENABLE);
-		ite_ec_write(base, ITE_EC_BEEP_ENABLE, reg);
+		reg |= pnp_read_hwm5_index(base, ITE_EC_BEEP_ENABLE);
+		pnp_write_hwm5_index(base, ITE_EC_BEEP_ENABLE, reg);
 	}
 }
 
@@ -283,11 +263,11 @@ void ite_ec_init(const u16 base, const struct ite_ec_config *const conf)
 	size_t i;
 
 	/* Configure 23.43kHz PWM active high output */
-	u8 fan_ctl = ite_ec_read(base, ITE_EC_FAN_CTL_MODE);
+	u8 fan_ctl = pnp_read_hwm5_index(base, ITE_EC_FAN_CTL_MODE);
 	fan_ctl &= ~ITE_EC_FAN_PWM_CLOCK_MASK;
 	fan_ctl |= ITE_EC_FAN_PWM_DEFAULT_CLOCK;
 	fan_ctl |= ITE_EC_FAN_CTL_POLARITY_HIGH;
-	ite_ec_write(base, ITE_EC_FAN_CTL_MODE, fan_ctl);
+	pnp_write_hwm5_index(base, ITE_EC_FAN_CTL_MODE, fan_ctl);
 
 	/* Enable HWM if configured */
 	for (i = 0; i < ITE_EC_TMPIN_CNT; ++i)
@@ -295,13 +275,13 @@ void ite_ec_init(const u16 base, const struct ite_ec_config *const conf)
 
 	/* Enable External Sensor SMBus Host if configured */
 	if (conf->smbus_en) {
-		ite_ec_write(base, ITE_EC_INTERFACE_SELECT,
-				ite_ec_read(base, ITE_EC_INTERFACE_SELECT) |
+		pnp_write_hwm5_index(base, ITE_EC_INTERFACE_SELECT,
+			pnp_read_hwm5_index(base, ITE_EC_INTERFACE_SELECT) |
 				ITE_EC_INTERFACE_SMB_ENABLE);
 	}
 
 	/* Enable reading of voltage pins */
-	ite_ec_write(base, ITE_EC_ADC_VOLTAGE_CHANNEL_ENABLE, conf->vin_mask);
+	pnp_write_hwm5_index(base, ITE_EC_ADC_VOLTAGE_CHANNEL_ENABLE, conf->vin_mask);
 
 	/* Enable FANx if configured */
 	for (i = 0; i < ITE_EC_FAN_CNT; ++i)