diff options
| author | Michał Żygowski <michal.zygowski@3mdeb.com> | 2024-07-17 09:55:12 +0200 |
|---|---|---|
| committer | Nico Huber <nico.h@gmx.de> | 2024-08-09 17:01:50 +0000 |
| commit | bfbc5cfcb2be562fc6fcf31dfcab9b648c9f81c7 (patch) | |
| tree | e4c11330952a6031a41ef4e81e8b2271992cb475 /src/superio/ite/it8772f/it8772f.h | |
| parent | 001f33cc03a724467138bb6a16aaa4496d3b4a44 (diff) | |
superio/ite: Remove custom ITE GPIO drivers and code
Since a generic ITE GPIO driver is available and in use, the existence
of chips-specific drivers no longer make sense. Remove the dead code
in favor of generic GPIO driver.
Change-Id: I7e031d12192af4bd47923d87c1d02c64f9c851a2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83497
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/superio/ite/it8772f/it8772f.h')
| -rw-r--r-- | src/superio/ite/it8772f/it8772f.h | 38 |
1 files changed, 0 insertions, 38 deletions
diff --git a/src/superio/ite/it8772f/it8772f.h b/src/superio/ite/it8772f/it8772f.h index 4df21c58cb..f2869233c7 100644 --- a/src/superio/ite/it8772f/it8772f.h +++ b/src/superio/ite/it8772f/it8772f.h @@ -11,42 +11,4 @@ #define IT8772F_GPIO 0x07 /* GPIO */ #define IT8772F_IR 0x0a /* Consumer IR */ - -/* GPIO interface */ -#define IT8772F_GPIO_LED_BLINK1_PINMAP 0xf8 - -#define SIO_GPIO_BLINK_GPIO10 0x08 -#define SIO_GPIO_BLINK_GPIO22 0x12 -#define SIO_GPIO_BLINK_GPIO45 0x25 - -#define IT8772F_GPIO_LED_BLINK1_CONTROL 0xf9 - -#define IT8772F_GPIO_BLINK_FREQUENCY_4_HZ (0<<1) -#define IT8772F_GPIO_BLINK_FREQUENCY_1_HZ (1<<1) -#define IT8772F_GPIO_BLINK_FREQUENCY_1_4_HZ (2<<1) -#define IT8772F_GPIO_BLINK_FREQUENCY_1_8_HZ (3<<1) - -#define GPIO_REG_SELECT(x) (0x25 + (x)) - -/* GPIO Polarity Select: 1: Inverting, 0: Non-inverting */ -#define GPIO_REG_POLARITY(x) (0xb0 + (x)) - -/* GPIO Internal Pull-up: 1: Enable, 0: Disable */ -#define GPIO_REG_PULLUP(x) (0xb8 + (x)) - -/* GPIO Function Select: 1: Simple I/O, 0: Alternate function */ -#define GPIO_REG_ENABLE(x) (0xc0 + (x)) - -/* GPIO Mode: 0: input mode, 1: output mode */ -#define GPIO_REG_OUTPUT(x) (0xc8 + (x)) - -#include <device/pnp_type.h> -#include <stdint.h> - -void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity, - u8 pullup, u8 output, u8 enable); - -void it8772f_gpio_led(pnp_devfn_t dev, int set, u8 select, u8 polarity, u8 pullup, - u8 output, u8 enable, u8 led_pin_map, u8 led_freq); - #endif /* SUPERIO_ITE_IT8772F_H */ |