second round name simplification. drop the <component>_ prefix.

the prefix was introduced in the early v2 tree many years ago
because our old build system "newconfig" could not handle two files with
the same name in different paths like /path/to/usb.c and
/another/path/to/usb.c correctly. Only one of the files would end up
being compiled into the final image.

Since Kconfig (actually since shortly before we switched to Kconfig) we
don't suffer from that problem anymore. So we could drop the sb700_
prefix from all those filenames (or, the <componentname>_ prefix in general)

- makes it easier to fork off a new chipset
- makes it easier to diff against other chipsets
- storing redundant information in filenames seems wrong

Signed-off-by: <stepan@coresystems.de>

Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6150 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 117 insertions, 0 deletions

diff --git a/src/superio/ite/it8712f/early_serial.c b/src/superio/ite/it8712f/early_serial.c
new file mode 100644
index 0000000000..ebc8e0a7f1
--- /dev/null
+++ b/src/superio/ite/it8712f/early_serial.c
@@ -0,0 +1,117 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2006 Uwe Hermann <uwe@hermann-uwe.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <arch/romcc_io.h>
+#include "it8712f.h"
+
+/* The base address is 0x2e or 0x4e, depending on config bytes. */
+#define SIO_BASE                     0x2e
+#define SIO_INDEX                    SIO_BASE
+#define SIO_DATA                     (SIO_BASE + 1)
+
+/* Global configuration registers. */
+#define IT8712F_CONFIG_REG_CC        0x02 /* Configure Control (write-only). */
+#define IT8712F_CONFIG_REG_LDN       0x07 /* Logical Device Number. */
+#define IT8712F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */
+#define IT8712F_CONFIG_REG_CLOCKSEL  0x23 /* Clock Selection. */
+#define IT8712F_CONFIG_REG_SWSUSP    0x24 /* Software Suspend, Flash I/F. */
+#define IT8712F_CONFIG_REG_MFC       0x2a /* Multi-function control */
+#define IT8712F_CONFIG_REG_WATCHDOG  0x72 /* Watchdog control. */
+
+static void it8712f_sio_write(u8 ldn, u8 index, u8 value)
+{
+	outb(IT8712F_CONFIG_REG_LDN, SIO_BASE);
+	outb(ldn, SIO_DATA);
+	outb(index, SIO_BASE);
+	outb(value, SIO_DATA);
+}
+
+static void it8712f_enter_conf(void)
+{
+	u16 port = 0x2e; /* TODO: Don't hardcode! */
+
+	outb(0x87, port);
+	outb(0x01, port);
+	outb(0x55, port);
+	outb((port == 0x4e) ? 0xaa : 0x55, port);
+}
+
+static void it8712f_exit_conf(void)
+{
+	it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02);
+}
+
+/* Select 24MHz CLKIN (48MHz is the default). */
+void it8712f_24mhz_clkin(void)
+{
+	it8712f_enter_conf();
+	it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CLOCKSEL, 0x1);
+	it8712f_exit_conf();
+}
+
+/*
+ * We need to set enable 3VSBSW#, this was documented only in IT8712F_V0.9.2!
+ *
+ * LDN 7, reg 0x2a - needed for S3, or memory power will be cut off.
+ *
+ * Enable 3VSBSW#. (For System Suspend-to-RAM)
+ * 0: 3VSBSW# will be always inactive.
+ * 1: 3VSBSW# enabled. It will be (NOT SUSB#) NAND SUSC#.
+ */
+void it8712f_enable_3vsbsw(void)
+{
+	it8712f_enter_conf();
+	it8712f_sio_write(IT8712F_GPIO, IT8712F_CONFIG_REG_MFC, 0x80);
+	it8712f_exit_conf();
+}
+
+void it8712f_kill_watchdog(void)
+{
+	it8712f_enter_conf();
+	it8712f_sio_write(IT8712F_GPIO, IT8712F_CONFIG_REG_WATCHDOG, 0x00);
+	it8712f_exit_conf();
+}
+
+/* Enable the serial port(s). */
+void it8712f_enable_serial(device_t dev, u16 iobase)
+{
+	/* (1) Enter the configuration state (MB PnP mode). */
+	it8712f_enter_conf();
+
+	/* (2) Modify the data of configuration registers. */
+
+	/*
+	 * Select the chip to configure (if there's more than one).
+	 * Set bit 7 to select JP3=1, clear bit 7 to select JP3=0.
+	 * If this register is not written, both chips are configured.
+	 */
+
+	/* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CONFIGSEL, 0x00); */
+
+	/* Enable serial port(s). */
+	it8712f_sio_write(IT8712F_SP1, 0x30, 0x1); /* Serial port 1 */
+	it8712f_sio_write(IT8712F_SP2, 0x30, 0x1); /* Serial port 2 */
+
+	/* Clear software suspend mode (clear bit 0). TODO: Needed? */
+	/* it8712f_sio_write(0x00, IT8712F_CONFIG_REG_SWSUSP, 0x00); */
+
+	/* (3) Exit the configuration state (MB PnP mode). */
+	it8712f_exit_conf();
+}