diff options
| author | Piotr Król <piotr.krol@3mdeb.com> | 2016-05-27 12:04:13 +0200 |
|---|---|---|
| committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2016-12-19 10:11:13 +0100 |
| commit | dcd2f17ff47cc1a4b26f253fb11a991cfe4ff6f5 (patch) | |
| tree | 8ca75267ff1c0fa136680bbe7a87dd8b58e697ee /src/southbridge | |
| parent | cff3b095c2fdb7af7b6fb0a1e09c2a66c1ad1c67 (diff) | |
pcengines/apu2: add board support
Initial work based on db-ft3b-ls and code released by Eltan. Board
boots with some limitation.
Now the AGESA binary is harcoded and board specific until it's fixed
by the SoC vendor.
memtest86+ from external repo skips looking for SPD on SMBus, which when
performed cause memtest86+ to hang. Still didn't tried whole test suit.
SeaBIOS 1.9.3 have some problems with USB which lead to no booting in
some cases. Full log:
https://gist.github.com/pietrushnic/787cbf63f610ff4f6b4ac13e5c20b872
SeaBIOS from PC Engines repository (https://github.com/pcengines/seabios)
works fine. Those changes are planned for upstream.
Information about obtaining and booting Voyage Linux:
https://github.com/pcengines/apu2-documentation#building-firmware-using-apu2-image-builder
Change-Id: Id23e448e27f4bba47b7e9e7fa7679e2690c6e4bc
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/14138
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Diffstat (limited to 'src/southbridge')
| -rw-r--r-- | src/southbridge/amd/pi/hudson/early_setup.c | 18 |
1 files changed, 17 insertions, 1 deletions
diff --git a/src/southbridge/amd/pi/hudson/early_setup.c b/src/southbridge/amd/pi/hudson/early_setup.c index 29809f1aec..553add9f5d 100644 --- a/src/southbridge/amd/pi/hudson/early_setup.c +++ b/src/southbridge/amd/pi/hudson/early_setup.c @@ -25,12 +25,12 @@ #include <cbmem.h> #include "hudson.h" #include "pci_devs.h" +#include <Fch/Fch.h> #if IS_ENABLED(CONFIG_HUDSON_UART) #include <cpu/x86/msr.h> #include <delay.h> -#include <Fch/Fch.h> void configure_hudson_uart(void) { @@ -174,4 +174,20 @@ int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos) return nvram_pos; } +void hudson_clk_output_48Mhz(void) +{ + u32 data, *memptr; + + /* + * Enable the X14M_25M_48M_OSC pin and leaving it at it's default so + * 48Mhz will be on ball AP13 (FT3b package) + */ + memptr = (u32 *)(ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40 ); + data = *memptr; + + /* clear the OSCOUT1_ClkOutputEnb to enable the 48 Mhz clock */ + data &= (u32)~(1<<2); + *memptr = data; +} + #endif |