summaryrefslogtreecommitdiff
path: root/src/southbridge
diff options
context:
space:
mode:
authorRichard Smith <smithbone@gmail.com>2006-07-30 00:23:20 +0000
committerRichard Smith <smithbone@gmail.com>2006-07-30 00:23:20 +0000
commitd7088c459c140d99a98e05c3be02e02592bb607e (patch)
tree726f8b388b77721fd426798fe6bb591dabc3b820 /src/southbridge
parent01789b630f9bc52bdd2a490bd63c2250a55f0cfd (diff)
- Fix some copy bugs and thinkos in the i440bx SMbus
read code. SBbus reads to RAM now work. Yah! - Rename the register constants to something I can look at more easily. - Make the logic flow match the flow from V1 assembly - #if 0 out other SMbus functions that are still broken. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2353 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge')
-rw-r--r--src/southbridge/intel/i440bx/i440bx_early_smbus.c28
-rw-r--r--src/southbridge/intel/i440bx/i440bx_smbus.h99
2 files changed, 72 insertions, 55 deletions
diff --git a/src/southbridge/intel/i440bx/i440bx_early_smbus.c b/src/southbridge/intel/i440bx/i440bx_early_smbus.c
index a3db7b88c0..172414e3d4 100644
--- a/src/southbridge/intel/i440bx/i440bx_early_smbus.c
+++ b/src/southbridge/intel/i440bx/i440bx_early_smbus.c
@@ -11,7 +11,7 @@ static void enable_smbus(void)
}
uint8_t enable;
print_spew("SMBus controller enabled\r\n");
- pci_write_config32(dev, 0x90, SMBUS_IO_BASE );
+ pci_write_config32(dev, 0x90, SMBUS_IO_BASE | 1 );
// Enable and set SMBBus
// 0x01 Interrupt to SMI#
// (0x4<<1)|1 set interrupt to IRQ9
@@ -21,25 +21,33 @@ static void enable_smbus(void)
pci_write_config16(dev, 0x04, 1);
/* clear any lingering errors, so the transaction will run */
- outb(0x1e, SMBUS_IO_BASE + SMBGSTATUS);
+ outb(0x1e, SMBUS_IO_BASE + SMBHST_STATUS);
}
-static int smbus_recv_byte(unsigned device)
-{
- return do_smbus_recv_byte(SMBUS_IO_BASE, device);
-}
-static int smbus_send_byte(unsigned device, unsigned char val)
-{
- return do_smbus_send_byte(SMBUS_IO_BASE, device, val);
-}
static int smbus_read_byte(unsigned device, unsigned address)
{
return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
}
+
+// The following functions are broken. Do no use until you
+// have fixed the low level code to do the right thing.
+//
+#if 0
static int smbus_write_byte(unsigned device, unsigned address, unsigned char val)
{
return do_smbus_write_byte(SMBUS_IO_BASE, device, address, val);
}
+
+static int smbus_recv_byte(unsigned device)
+{
+ return do_smbus_recv_byte(SMBUS_IO_BASE, device);
+}
+
+static int smbus_send_byte(unsigned device, unsigned char val)
+{
+ return do_smbus_send_byte(SMBUS_IO_BASE, device, val);
+}
+#endif
diff --git a/src/southbridge/intel/i440bx/i440bx_smbus.h b/src/southbridge/intel/i440bx/i440bx_smbus.h
index 9a100c0f8b..e1893c5cb1 100644
--- a/src/southbridge/intel/i440bx/i440bx_smbus.h
+++ b/src/southbridge/intel/i440bx/i440bx_smbus.h
@@ -1,13 +1,14 @@
#include <device/smbus_def.h>
-#define SMBGSTATUS 0x0
-#define SMBGCTL 0x2
-#define SMBHSTCMD 0x3
-#define SMBHSTADDR 0x4
-#define SMBHSTDAT 0x5
+#define SMBHST_STATUS 0x0
+#define SMBHST_CTL 0x2
+#define SMBHST_CMD 0x3
+#define SMBHST_ADDR 0x4
+#define SMBHST_DAT 0x5
#define SMBUS_TIMEOUT (100*1000*10)
#define SMBUS_STATUS_MASK 0x1e
+#define SMBUS_ERROR_FLAG (1<<2)
static inline void smbus_delay(void)
{
@@ -26,14 +27,16 @@ static int smbus_wait_until_ready(unsigned smbus_io_base)
do {
unsigned char val;
smbus_delay();
- val = inb(smbus_io_base + SMBGSTATUS);
+ val = inb(smbus_io_base + SMBHST_STATUS);
if ((val & 0x1) == 0) {
break;
}
+#if 0
if(loops == (SMBUS_TIMEOUT / 2)) {
- outw(inw(smbus_io_base + SMBGSTATUS),
- smbus_io_base + SMBGSTATUS);
+ outw(inw(smbus_io_base + SMBHST_STATUS),
+ smbus_io_base + SMBHST_STATUS);
}
+#endif
} while(--loops);
return loops?0:SMBUS_WAIT_UNTIL_READY_TIMEOUT;
}
@@ -46,7 +49,7 @@ static int smbus_wait_until_done(unsigned smbus_io_base)
unsigned short val;
smbus_delay();
- val = inb(smbus_io_base + SMBGSTATUS);
+ val = inb(smbus_io_base + SMBHST_STATUS);
// Make sure the command is done
if ((val & 0x1) != 0) {
continue;
@@ -71,23 +74,23 @@ static int do_smbus_recv_byte(unsigned smbus_io_base, unsigned device)
/* setup transaction */
/* disable interrupts */
- outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+ outw(inw(smbus_io_base + SMBHST_CTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBHST_CTL);
/* set the device I'm talking too */
- outw(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+ outw(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHST_ADDR);
/* set the command/address... */
- outb(0, smbus_io_base + SMBHSTCMD);
+ outb(0, smbus_io_base + SMBHST_CMD);
/* set up for a send byte */
- outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL);
+ outw((inw(smbus_io_base + SMBHST_CTL) & ~7) | (0x1), smbus_io_base + SMBHST_CTL);
/* clear any lingering errors, so the transaction will run */
/* Do I need to write the bits to a 1 to clear an error? */
- outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+ outw(inw(smbus_io_base + SMBHST_STATUS), smbus_io_base + SMBHST_STATUS);
/* set the data word...*/
- outw(0, smbus_io_base + SMBHSTDAT);
+ outw(0, smbus_io_base + SMBHST_DAT);
/* start the command */
- outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+ outw((inw(smbus_io_base + SMBHST_CTL) | (1 << 3)), smbus_io_base + SMBHST_CTL);
/* poll for transaction completion */
@@ -95,10 +98,10 @@ static int do_smbus_recv_byte(unsigned smbus_io_base, unsigned device)
return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
}
- global_status_register = inw(smbus_io_base + SMBGSTATUS);
+ global_status_register = inw(smbus_io_base + SMBHST_STATUS);
/* read results of transaction */
- byte = inb(smbus_io_base + SMBHSTDAT) & 0xff;
+ byte = inb(smbus_io_base + SMBHST_DAT) & 0xff;
// Check for any result other than a command completion
if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 1)) {
@@ -117,30 +120,30 @@ static int do_smbus_send_byte(unsigned smbus_io_base, unsigned device, unsigned
/* setup transaction */
/* disable interrupts */
- outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+ outw(inw(smbus_io_base + SMBHST_CTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBHST_CTL);
/* set the device I'm talking too */
- outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+ outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHST_ADDR);
/* set the command/address... */
- outb(0, smbus_io_base + SMBHSTCMD);
+ outb(0, smbus_io_base + SMBHST_CMD);
/* set up for a send byte */
- outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL);
+ outw((inw(smbus_io_base + SMBHST_CTL) & ~7) | (0x1), smbus_io_base + SMBHST_CTL);
/* clear any lingering errors, so the transaction will run */
/* Do I need to write the bits to a 1 to clear an error? */
- outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+ outw(inw(smbus_io_base + SMBHST_STATUS), smbus_io_base + SMBHST_STATUS);
/* set the data word...*/
- outw(value, smbus_io_base + SMBHSTDAT);
+ outw(value, smbus_io_base + SMBHST_DAT);
/* start the command */
- outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+ outw((inw(smbus_io_base + SMBHST_CTL) | (1 << 3)), smbus_io_base + SMBHST_CTL);
/* poll for transaction completion */
if (smbus_wait_until_done(smbus_io_base) < 0) {
return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
}
- global_status_register = inw(smbus_io_base + SMBGSTATUS);
+ global_status_register = inw(smbus_io_base + SMBHST_STATUS);
if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
return SMBUS_ERROR;
@@ -151,7 +154,7 @@ static int do_smbus_send_byte(unsigned smbus_io_base, unsigned device, unsigned
static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
{
- unsigned global_status_register;
+ unsigned status_register;
unsigned byte;
if (smbus_wait_until_ready(smbus_io_base) < 0) {
@@ -161,30 +164,36 @@ static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned
/* setup transaction */
/* clear any lingering errors, so the transaction will run */
- outb(0x1e, smbus_io_base + SMBGSTATUS);
+ outb(0x1e, smbus_io_base + SMBHST_STATUS);
/* set the device I'm talking too */
- outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+ outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHST_ADDR);
+
/* set the command/address... */
- outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+ outb(address & 0xff, smbus_io_base + SMBHST_CMD);
/* clear the data word...*/
- outb(0, smbus_io_base + SMBHSTDAT);
+ outb(0, smbus_io_base + SMBHST_DAT);
/* start a byte read with interrupts disabled */
- outb( (0x02 << 2)|(1<<6), smbus_io_base + SMBGCTL);
+ outb( (0x02 << 2)|(1<<6), smbus_io_base + SMBHST_CTL);
/* poll for transaction completion */
if (smbus_wait_until_done(smbus_io_base) < 0) {
return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
}
- global_status_register = inw(smbus_io_base + SMBGSTATUS);
+ status_register = inw(smbus_io_base + SMBHST_STATUS);
/* read results of transaction */
- byte = inw(smbus_io_base + SMBHSTDAT) & 0xff;
-
- if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+ byte = inw(smbus_io_base + SMBHST_DAT) & 0xff;
+
+ if (status_register & 0x04) {
+#if 0
+ print_debug("Read fail ");
+ print_debug_hex16(status_register);
+ print_debug("\r\n");
+#endif
return SMBUS_ERROR;
}
return byte;
@@ -200,29 +209,29 @@ static int do_smbus_write_byte(unsigned smbus_io_base, unsigned device, unsigned
/* setup transaction */
/* disable interrupts */
- outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+ outw(inw(smbus_io_base + SMBHST_CTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBHST_CTL);
/* set the device I'm talking too */
- outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
- outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+ outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHST_ADDR);
+ outb(address & 0xFF, smbus_io_base + SMBHST_CMD);
/* set up for a byte data write */ /* FIXME */
- outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x2), smbus_io_base + SMBGCTL);
+ outw((inw(smbus_io_base + SMBHST_CTL) & ~7) | (0x2), smbus_io_base + SMBHST_CTL);
/* clear any lingering errors, so the transaction will run */
/* Do I need to write the bits to a 1 to clear an error? */
- outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+ outw(inw(smbus_io_base + SMBHST_STATUS), smbus_io_base + SMBHST_STATUS);
/* write the data word...*/
- outw(val, smbus_io_base + SMBHSTDAT);
+ outw(val, smbus_io_base + SMBHST_DAT);
/* start the command */
- outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+ outw((inw(smbus_io_base + SMBHST_CTL) | (1 << 3)), smbus_io_base + SMBHST_CTL);
/* poll for transaction completion */
if (smbus_wait_until_done(smbus_io_base) < 0) {
return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
}
- global_status_register = inw(smbus_io_base + SMBGSTATUS);
+ global_status_register = inw(smbus_io_base + SMBHST_STATUS);
- if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+ if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 1)) {
return SMBUS_ERROR;
}
return 0;