summaryrefslogtreecommitdiff
path: root/src/southbridge/via/vt8237r
diff options
context:
space:
mode:
authorUwe Hermann <uwe@hermann-uwe.de>2008-10-12 14:40:23 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2008-10-12 14:40:23 +0000
commit0a20c416226d34ef25881e4d143cf1b8bf531656 (patch)
tree4063219eef59254c34ef8db6fef59f3d2fc7e1c8 /src/southbridge/via/vt8237r
parent2e5a9d952f3f3d23cf57a08abeffe3dee3444950 (diff)
VIA VT8237R cleanups (trivial).
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3651 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/via/vt8237r')
-rw-r--r--src/southbridge/via/vt8237r/chip.h2
-rw-r--r--src/southbridge/via/vt8237r/vt8237_ctrl.c69
-rw-r--r--src/southbridge/via/vt8237r/vt8237r.c3
-rw-r--r--src/southbridge/via/vt8237r/vt8237r_early_smbus.c205
-rw-r--r--src/southbridge/via/vt8237r/vt8237r_lpc.c72
-rw-r--r--src/southbridge/via/vt8237r/vt8237r_sata.c34
6 files changed, 205 insertions, 180 deletions
diff --git a/src/southbridge/via/vt8237r/chip.h b/src/southbridge/via/vt8237r/chip.h
index 8f15c1ae94..f853ff26d3 100644
--- a/src/southbridge/via/vt8237r/chip.h
+++ b/src/southbridge/via/vt8237r/chip.h
@@ -53,7 +53,7 @@ struct southbridge_via_vt8237r_config {
int ide0_enable:1;
int ide1_enable:1;
- /* 1 = 80-pin cable */
+ /* 1 = 80-pin cable, 0 = 40-pin cable */
int ide0_80pin_cable:1;
int ide1_80pin_cable:1;
};
diff --git a/src/southbridge/via/vt8237r/vt8237_ctrl.c b/src/southbridge/via/vt8237r/vt8237_ctrl.c
index 666fbcf68c..0af20d37cb 100644
--- a/src/southbridge/via/vt8237r/vt8237_ctrl.c
+++ b/src/southbridge/via/vt8237r/vt8237_ctrl.c
@@ -28,20 +28,17 @@
static void vt8237_cfg(struct device *dev)
{
u8 regm, regm2, regm3;
-
device_t devfun3;
devfun3 = dev_find_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_K8T890CE_3, 0);
-
- if (!devfun3)
- devfun3 = dev_find_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_K8M890CE_3, 0);
-
- if (!devfun3)
- die("Unknown NB");
-
- /* CPU to PCI Flow Control 1 & 2, just fill in recommended */
+ PCI_DEVICE_ID_VIA_K8T890CE_3, 0);
+ if (!devfun3)
+ devfun3 = dev_find_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_K8M890CE_3, 0);
+ if (!devfun3)
+ die("Unknown NB");
+
+ /* CPU to PCI Flow Control 1 & 2, just fill in recommended. */
pci_write_config8(dev, 0x70, 0xc2);
pci_write_config8(dev, 0x71, 0xc8);
@@ -54,7 +51,8 @@ static void vt8237_cfg(struct device *dev)
pci_write_config8(dev, 0x77, 0x48);
pci_write_config8(dev, 0x78, 0x01);
/* APIC on HT */
- pci_write_config8(dev, 0x7c, 0x77); //maybe Enable LDT APIC Mode bit3 set to 1
+ /* Maybe Enable LDT APIC Mode bit3 set to 1 */
+ pci_write_config8(dev, 0x7c, 0x77);
/* WARNING: Need to copy some registers from NB (D0F3) to SB (D11F7). */
@@ -89,28 +87,24 @@ static void vt8237_cfg(struct device *dev)
* NB V-Link Manual Driving Control - Data 0xb6 0x46 0x46 0x88 0x88
* NB V-Link Receiving Strobe Delay 0xb7 0x02 0x02 0x61 0x01
* NB V-Link Compensation Control bit4,0 (b5,b6) 0xb4 0x10 0x10 0x11 0x11
- * SB V-Link Strobe Drive Control 0xb9 0x00 0xa5 0x98 0x98
+ * SB V-Link Strobe Drive Control 0xb9 0x00 0xa5 0x98 0x98
* SB V-Link Data drive Control???? 0xba 0x00 0xbb 0x77 0x77
* SB V-Link Receive Strobe Delay???? 0xbb 0x04 0x11 0x11 0x11
* SB V-Link Compensation Control bit0 (use b9) 0xb8 0x00 0x01 0x01 0x01
* V-Link CKG Control 0xb0 0x05 0x05 0x06 0x03
* V-Link CKG Control 0xb1 0x05 0x05 0x01 0x03
*/
-
static void vt8237s_vlink_init(struct device *dev)
{
u8 reg;
-
device_t devfun7;
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_K8T890CE_7, 0);
-
+ PCI_DEVICE_ID_VIA_K8T890CE_7, 0);
if (!devfun7)
devfun7 = dev_find_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_K8M890CE_7, 0);
-
- /* no pairing NB found */
+ PCI_DEVICE_ID_VIA_K8M890CE_7, 0);
+ /* No pairing NB was found. */
if (!devfun7)
return;
@@ -132,40 +126,43 @@ static void vt8237s_vlink_init(struct device *dev)
pci_write_config8(dev, 0xba, 0x88);
pci_write_config8(dev, 0xbb, 0x89);
-
reg = pci_read_config8(dev, 0xbd);
reg |= 0x3;
pci_write_config8(dev, 0xbd, reg);
- /* Program V-link 8X 8bit full duplex, parity disabled FIXME */
+ /* Program V-link 8X 8bit full duplex, parity disabled. FIXME. */
pci_write_config8(dev, 0x48, 0x13);
}
-static void ctrl_enable(struct device *dev) {
-
- /* enable the 0:13 and 0:13.1 */
+static void ctrl_enable(struct device *dev)
+{
+ /* Enable the 0:13 and 0:13.1. */
/* FIXME */
pci_write_config8(dev, 0x4f, 0x43);
}
-
extern void dump_south(device_t dev);
-static void ctrl_init(struct device *dev) {
-
- /* TODO: Fix some ordering issue fo V-link set Rx77[6] and PCI1_Rx4F[0]
- should to 1 FIXME DO you need?*/
+static void ctrl_init(struct device *dev)
+{
+ /*
+ * TODO: Fix some ordering issue for V-link set Rx77[6] and
+ * PCI1_Rx4F[0] should to 1.
+ * FIXME DO you need?
+ */
- /* VT8237R specific configuration other SB are done in their own directories */
- /* add A version */
+ /*
+ * VT8237R specific configuration. Other SB are done in their own
+ * directories. TODO: Add A version.
+ */
device_t devsb = dev_find_device(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_VT8237S_LPC, 0);
+ PCI_DEVICE_ID_VIA_VT8237S_LPC, 0);
if (devsb) {
- /* FIXME: Skip v-link setup for now */
-// vt8237s_vlink_init(dev);
+ /* FIXME: Skip v-link setup for now. */
+// vt8237s_vlink_init(dev);
}
- /* configure PCI1 and copy mirror registers from D0F3 */
+ /* Configure PCI1 and copy mirror registers from D0F3. */
vt8237_cfg(dev);
dump_south(dev);
}
diff --git a/src/southbridge/via/vt8237r/vt8237r.c b/src/southbridge/via/vt8237r/vt8237r.c
index a72b9a1c06..4ec49cd1c8 100644
--- a/src/southbridge/via/vt8237r/vt8237r.c
+++ b/src/southbridge/via/vt8237r/vt8237r.c
@@ -63,9 +63,8 @@ void dump_south(device_t dev)
for (i = 0; i < 256; i += 16) {
printk_debug("%02x: ", i);
- for (j = 0; j < 16; j++) {
+ for (j = 0; j < 16; j++)
printk_debug("%02x ", pci_read_config8(dev, i + j));
- }
printk_debug("\n");
}
}
diff --git a/src/southbridge/via/vt8237r/vt8237r_early_smbus.c b/src/southbridge/via/vt8237r/vt8237r_early_smbus.c
index 5b865d3814..9c91a71963 100644
--- a/src/southbridge/via/vt8237r/vt8237r_early_smbus.c
+++ b/src/southbridge/via/vt8237r/vt8237r_early_smbus.c
@@ -128,27 +128,27 @@ u8 smbus_read_byte(u8 dimm, u8 offset)
return val;
}
+
/**
- * Enable the smbus on vt8237r-based systems
+ * Enable the SMBus on VT8237R-based systems.
*/
void enable_smbus(void)
{
device_t dev;
/* Power management controller */
-
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
-
if (dev == PCI_DEV_INVALID) {
/* Power management controller */
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
+ PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
if (dev == PCI_DEV_INVALID)
die("Power management controller not found\r\n");
}
- /* 7 = SMBus Clock from RTC 32.768KHz
+ /*
+ * 7 = SMBus Clock from RTC 32.768KHz
* 5 = Internal PLL reset from susp
*/
pci_write_config8(dev, VT8237R_POWER_WELL, 0xa0);
@@ -201,7 +201,7 @@ void smbus_fixup(const struct mem_controller *ctrl)
* VT8237R has only been seen on DDR and DDR2 based systems, so far.
*/
for (i = 0; (i < SMBUS_TIMEOUT && ((result < SPD_MEMORY_TYPE_SDRAM) ||
- (result > SPD_MEMORY_TYPE_SDRAM_DDR3))); i++) {
+ (result > SPD_MEMORY_TYPE_SDRAM_DDR3))); i++) {
if (current_slot > ram_slots)
current_slot = 0;
@@ -218,88 +218,100 @@ void smbus_fixup(const struct mem_controller *ctrl)
PRINT_DEBUG("Done\r\n");
}
-/* fixme better separate the NB and SB, will done once it works */
+/* FIXME: Better separate the NB and SB, will be done once it works. */
-void vt8237_sb_enable_fid_vid(void) {
- device_t dev;
- device_t devctl;
+void vt8237_sb_enable_fid_vid(void)
+{
+ device_t dev, devctl;
/* Power management controller */
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
-
if (dev == PCI_DEV_INVALID) {
- /* Power management controller */
+ /* Power management controller */
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
+ PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
if (dev == PCI_DEV_INVALID)
return;
devctl = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_VT8237_VLINK), 0);
+ PCI_DEVICE_ID_VIA_VT8237_VLINK), 0);
if (devctl == PCI_DEV_INVALID)
return;
-
+
+ /* TODO: Why is this an extra block? */
{
- u8 tmp;
- tmp = pci_read_config8(devctl, 0xec);
- print_debug("EC is ");
- print_debug_hex8(tmp);
- print_debug(" E5 is ");
- tmp = pci_read_config8(dev, 0xe5);
- print_debug_hex8(tmp);
-
+ u8 tmp;
+ tmp = pci_read_config8(devctl, 0xec);
+ print_debug("EC is ");
+ print_debug_hex8(tmp);
+ print_debug(" E5 is ");
+ tmp = pci_read_config8(dev, 0xe5);
+ print_debug_hex8(tmp);
}
+
/* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */
pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1);
+
/* Enable ACPI accessm RTC signal gated with PSON. */
pci_write_config8(dev, 0x81, 0x84);
- /* Allow SLP# signal to assert LDTSTOP_L.
+
+ /*
+ * Allow SLP# signal to assert LDTSTOP_L.
* Will work for C3 and for FID/VID change.
*/
- /* fixme */
- outb(0xff, VT8237R_ACPI_IO_BASE + 0x50); //fixme maybe not needed
+ /* FIXME */
+ outb(0xff, VT8237R_ACPI_IO_BASE + 0x50); /* Maybe unneeded? */
+// outb(0x4, VT8237R_ACPI_IO_BASE + 0x50); /* Maybe unneeded? */
-// outb(0x4, VT8237R_ACPI_IO_BASE + 0x50); //fixme maybe not needed
+ /* It seems for AMD LDTSTP is connected not to SLP anymore. */
+ /* Enable 0: DPSLP# / DPRSTP# / VRDSLP */
- /* it seems for AMD LDTSTP is connected not to SLP anymore */
- /* enable 0: DPSLP# / DPRSTP# / VRDSLP */
+ /*
+ * Enable SATA LED, VR timer = 100us.
+ * Enable DPSLP# / DPRSTP# / VRDSLP - WARNING LDTSTP connetcs
+ * to some of those pins! (and not to SLP as on R ver).
+ */
+ pci_write_config8(dev, 0xe5, 0x69); /* FIXME */
- /* Enable SATA LED, VR timer = 100us
- * Enable DPSLP# / DPRSTP# / VRDSLP - WARNING LDTSTP connetcs to some of those pins! (and not to SLP as on R ver)
+ /*
+ * REQ5 as PCI request input - should be together with
+ * INTE-INTH. Fast VR timer disable - need for LDTSTP signal.
*/
- //fixme
- pci_write_config8(dev, 0xe5, 0x69);
-
- /* REQ5 as PCI request input - should be together with INTE-INTH.
- * Fast VR timer disable - need for LDTSTP signal
- */
pci_write_config8(dev, 0xe4, 0xa5);
-
- /* reduce further the STPCLK/LDTSTP signal to 5us */
+ /* Reduce further the STPCLK/LDTSTP signal to 5us. */
pci_write_config8(dev, 0xec, 0x4);
- /* Host Bus Power Management Control, maybe not needed */
+
+ /* Host Bus Power Management Control, maybe not needed. */
pci_write_config8(dev, 0x8c, 0x5);
- /* so the chip knows we are on AMD */
+ /* So the chip knows we are on AMD. */
pci_write_config8(devctl, 0x7c, 0x77);
devctl = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
- 0x2336), 0);
+ 0x2336), 0);
if (devctl == PCI_DEV_INVALID)
return;
- /* Enable C2NOW delay to PSTATECTL VID / FID Change Delay to P-State Control */
+
+ /*
+ * Enable C2NOW delay to PSTATECTL VID / FID Change Delay
+ * to P-State Control.
+ */
pci_write_config8(devctl, 0xa6, 0x83);
- //return; //FIXME fall through some revs have it old way
+ // return; // FIXME: Fall through some revs have it old way.
}
+
/* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */
pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1);
+
/* Enable ACPI accessm RTC signal gated with PSON. */
pci_write_config8(dev, 0x81, 0x84);
- /* Allow SLP# signal to assert LDTSTOP_L.
+
+ /*
+ * Allow SLP# signal to assert LDTSTOP_L.
* Will work for C3 and for FID/VID change.
*/
outb(0x1, VT8237R_ACPI_IO_BASE + 0x11);
@@ -312,97 +324,97 @@ void enable_rom_decode(void)
/* Power management controller */
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
-
if (dev == PCI_DEV_INVALID) {
- /* Power management controller */
+ /* Power management controller */
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
- PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
+ PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
if (dev == PCI_DEV_INVALID)
return;
}
- /* ROM decode last 1MB FFC00000 - FFFFFFFF */
+ /* ROM decode last 1MB FFC00000 - FFFFFFFF. */
pci_write_config8(dev, 0x41, 0x7f);
}
-void vt8237_early_spi_init(void) {
+void vt8237_early_spi_init(void)
+{
device_t dev;
volatile u16 *spireg;
u32 tmp;
- /* Bus Control and Power Management */
+ /* Bus Control and Power Management */
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VT8237S_LPC), 0);
if (dev == PCI_DEV_INVALID)
die("SB not found\r\n");
- /* put SPI base 20 d0 fe */
+ /* Put SPI base 20 d0 fe. */
tmp = pci_read_config32(dev, 0xbc);
- pci_write_config32(dev, 0xbc, (VT8237S_SPI_MEM_BASE >> 8) | (tmp & 0xFF000000));
+ pci_write_config32(dev, 0xbc,
+ (VT8237S_SPI_MEM_BASE >> 8) | (tmp & 0xFF000000));
- /* set SPI clock to 33MHz */
+ /* Set SPI clock to 33MHz. */
spireg = (u16 *) (VT8237S_SPI_MEM_BASE + 0x6c);
- (*spireg) &= 0xff00;
+ (*spireg) &= 0xff00;
}
-/* offset 0x58
+/*
+ * Offset 0x58:
* 31:20 reserved
* 19:16 4 bit position in shadow EEPROM
* 15:0 data to write
*
- * offset 0x5c
+ * Offset 0x5c:
* 31:28 reserved
* 27 ERDBG - enable read from 0x5c
* 26 reserved
* 25 SEELD
- * 24 SEEPR - write 1 when done updating, wait until SEELD is set to 1, sticky
+ * 24 SEEPR - write 1 when done updating, wait until SEELD is
+ * set to 1, sticky
* cleared by reset, if it is 1 writing is disabled
* 19:16 4 bit position in shadow EEPROM
* 15:0 data from shadow EEPROM
*
- * after PCIRESET SEELD and SEEPR must be 1 and 1
-*/
+ * After PCIRESET SEELD and SEEPR must be 1 and 1.
+ */
-/* 1 = needs PCI reset, 0 don't reset, network initialized */
+/* 1 = needs PCI reset, 0 don't reset, network initialized. */
-/* fixme maybe close the debug register after use? */
+/* FIXME: Maybe close the debug register after use? */
#define LAN_TIMEOUT 0x7FFFFFFF
-int vt8237_early_network_init(struct vt8237_network_rom *rom) {
+int vt8237_early_network_init(struct vt8237_network_rom *rom)
+{
struct vt8237_network_rom n;
- int loops;
+ int i, loops;
device_t dev;
u32 tmp;
u8 status;
u16 *rom_write;
unsigned int checksum;
- int i;
/* Network adapter */
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_8233_7), 0);
-
if (dev == PCI_DEV_INVALID) {
- print_err("Network is disabled, please enable\n");
- return 0;
+ print_err("Network is disabled, please enable\n");
+ return 0;
}
tmp = pci_read_config32(dev, 0x5c);
- /* enable ERDBG */
- tmp |= 0x08000000;
+ tmp |= 0x08000000; /* Enable ERDBG. */
pci_write_config32(dev, 0x5c, tmp);
-
+
status = ((pci_read_config32(dev, 0x5c) >> 24) & 0x3);
-
- if (status == 3) {
- /* network controller OK, EEPROM loaded */
- return 0;
- }
-
+
+ /* Network controller OK, EEPROM loaded. */
+ if (status == 3)
+ return 0;
+
if (rom == NULL) {
- print_err("No configuration data specified, using default MAC!\n");
+ print_err("No config data specified, using default MAC!\n");
n.mac_address[0] = 0x0;
n.mac_address[1] = 0x0;
n.mac_address[2] = 0xde;
@@ -431,40 +443,41 @@ int vt8237_early_network_init(struct vt8237_network_rom *rom) {
n.checksum = 0x0;
rom = &n;
}
-
+
rom_write = (u16 *) rom;
checksum = 0;
- /* write all data except checksum and second to last byte */
- tmp &= 0xff000000; /* leave reserved bits in */
+ /* Write all data except checksum and second to last byte. */
+ tmp &= 0xff000000; /* Leave reserved bits in. */
for (i = 0; i < 15; i++) {
pci_write_config32(dev, 0x58, tmp | (i << 16) | rom_write[i]);
- /* lame code fixme */
+ /* Lame code FIXME */
checksum += rom_write[i] & 0xff;
- //checksum %= 256;
+ /* checksum %= 256; */
checksum += (rom_write[i] >> 8) & 0xff;
- //checksum %= 256;
+ /* checksum %= 256; */
}
-
+
checksum += (rom_write[15] & 0xff);
checksum = ~(checksum & 0xff);
tmp |= (((checksum & 0xff) << 8) | rom_write[15]);
- /* write last byte and checksum */
- pci_write_config32(dev, 0x58, (15 << 16) | tmp);
-
+ /* Write last byte and checksum. */
+ pci_write_config32(dev, 0x58, (15 << 16) | tmp);
+
tmp = pci_read_config32(dev, 0x5c);
- pci_write_config32(dev, 0x5c, tmp | 0x01000000); /* toggle SEEPR */
-
+ pci_write_config32(dev, 0x5c, tmp | 0x01000000); /* Toggle SEEPR. */
+
/* Yes, this is a mess, but it's the easiest way to do it. */
- while ( (((pci_read_config32(dev, 0x5c) >> 25) & 1) == 0)
- && (loops < LAN_TIMEOUT))
+ while ((((pci_read_config32(dev, 0x5c) >> 25) & 1) == 0)
+ && (loops < LAN_TIMEOUT)) {
++loops;
+ }
if (loops >= LAN_TIMEOUT) {
- print_err("Timout - LAN controller did not accept configuration\n");
- return 0;
+ print_err("Timeout - LAN controller didn't accept config\n");
+ return 0;
}
-
- /* we are done, config will be used after PCIRST# */
+
+ /* We are done, config will be used after PCIRST#. */
return 1;
}
diff --git a/src/southbridge/via/vt8237r/vt8237r_lpc.c b/src/southbridge/via/vt8237r/vt8237r_lpc.c
index 4d24e6161d..e67e5cbb41 100644
--- a/src/southbridge/via/vt8237r/vt8237r_lpc.c
+++ b/src/southbridge/via/vt8237r/vt8237r_lpc.c
@@ -54,8 +54,8 @@ static struct ioapicreg {
} ioapic_table[] = {
/* IO-APIC virtual wire mode configuration. */
/* mask, trigger, polarity, destination, delivery, vector */
- {0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST |
- ExtINT, NONE},
+ {0, ENABLED | TRIGGER_EDGE | POLARITY_HIGH | PHYSICAL_DEST |
+ ExtINT, NONE}, {
{1, DISABLED, NONE},
{2, DISABLED, NONE},
{3, DISABLED, NONE},
@@ -167,13 +167,15 @@ static void setup_pm(device_t dev)
/* GP Timer Control 1s */
pci_write_config8(dev, 0x93, 0x88);
- /* 7 = SMBus clock from RTC 32.768KHz
+ /*
+ * 7 = SMBus clock from RTC 32.768KHz
* 5 = Internal PLL reset from susp
* 2 = GPO2 is GPIO
*/
pci_write_config8(dev, 0x94, 0xa4);
- /* 7 = stp to sust delay 1msec
+ /*
+ * 7 = stp to sust delay 1msec
* 6 = SUSST# Deasserted Before PWRGD for STD
* 4 = PWRGOOD reset on VT8237A/S
* 3 = GPO26/GPO27 is GPO
@@ -216,14 +218,14 @@ static void setup_pm(device_t dev)
/* SCI is generated for RTC/pwrBtn/slpBtn. */
outw(0x001, VT8237R_ACPI_IO_BASE + 0x04);
-
}
-
-static void vt8237r_init(struct device *dev) {
+static void vt8237r_init(struct device *dev)
+{
u8 enables;
- /* Enable SATA LED, disable special CPU Frequency Change -
+ /*
+ * Enable SATA LED, disable special CPU Frequency Change -
* GPIO28 GPIO22 GPIO29 GPIO23 are GPIOs.
*/
pci_write_config8(dev, 0xe5, 0x9);
@@ -236,14 +238,18 @@ static void vt8237r_init(struct device *dev) {
enables |= 0x08;
pci_write_config8(dev, 0x4f, enables);
- /* Set Read Pass Write Control Enable (force A2 from APIC FSB to low). */
+ /*
+ * Set Read Pass Write Control Enable
+ * (force A2 from APIC FSB to low).
+ */
pci_write_config8(dev, 0x48, 0x8c);
southbridge_init_common(dev);
/* FIXME: Intel needs more bit set for C2/C3. */
- /* Allow SLP# signal to assert LDTSTOP_L.
+ /*
+ * Allow SLP# signal to assert LDTSTOP_L.
* Will work for C3 and for FID/VID change.
*/
outb(0x1, VT8237R_ACPI_IO_BASE + 0x11);
@@ -252,40 +258,43 @@ static void vt8237r_init(struct device *dev) {
static void vt8237s_init(struct device *dev)
{
u32 tmp;
-
- /* put SPI base VT8237S_SPI_MEM_BASE */
+
+ /* Put SPI base VT8237S_SPI_MEM_BASE. */
tmp = pci_read_config32(dev, 0xbc);
- pci_write_config32(dev, 0xbc, (VT8237S_SPI_MEM_BASE >> 8) | (tmp & 0xFF000000));
+ pci_write_config32(dev, 0xbc,
+ (VT8237S_SPI_MEM_BASE >> 8) | (tmp & 0xFF000000));
- /* Enable SATA LED, VR timer = 100us, VR timer should be fixed */
-
+ /* Enable SATA LED, VR timer = 100us, VR timer should be fixed. */
pci_write_config8(dev, 0xe5, 0x69);
- /* REQ5 as PCI request input - should be together with INTE-INTH.
- * Fast VR timer disable - need for LDTSTOP_L signal
- */
+ /*
+ * REQ5 as PCI request input - should be together with INTE-INTH.
+ * Fast VR timer disable - need for LDTSTOP_L signal.
+ */
pci_write_config8(dev, 0xe4, 0xa5);
- /* reduce further the STPCLK/LDTSTP signal to 5us */
-
+ /* Reduce further the STPCLK/LDTSTP signal to 5us. */
pci_write_config8(dev, 0xec, 0x4);
/* Host Bus Power Management Control, maybe not needed */
pci_write_config8(dev, 0x8c, 0x5);
- /* Enable HPET at VT8237R_HPET_ADDR., does not work correctly on R */
+ /* Enable HPET at VT8237R_HPET_ADDR., does not work correctly on R. */
pci_write_config32(dev, 0x68, (VT8237R_HPET_ADDR | 0x80));
southbridge_init_common(dev);
-
+
/* FIXME: Intel needs more bit set for C2/C3. */
- /* Allow SLP# signal to assert LDTSTOP_L.
- * Will work for C3 and for FID/VID change. FIXME FIXME, pre rev A2
+ /*
+ * Allow SLP# signal to assert LDTSTOP_L.
+ * Will work for C3 and for FID/VID change. FIXME FIXME, pre rev A2.
*/
outb(0xff, VT8237R_ACPI_IO_BASE + 0x50);
+
dump_south(dev);
}
+
static void vt8237_common_init(struct device *dev)
{
u8 enables, byte;
@@ -315,7 +324,8 @@ static void vt8237_common_init(struct device *dev)
*/
pci_write_config8(dev, 0x41, 0x7f);
- /* Set bit 6 of 0x40 (I/O recovery time).
+ /*
+ * Set bit 6 of 0x40 (I/O recovery time).
* IMPORTANT FIX - EISA = ECLR reg at 0x4d0! Decoding must be on so
* that PCI interrupts can be properly marked as level triggered.
*/
@@ -338,11 +348,12 @@ static void vt8237_common_init(struct device *dev)
pci_write_config8(dev, 0x59, 0x80);
/*
- * bit meaning
- * 3 Bypass APIC De-Assert Message (1=Enable)
- * 1 possibly "INTE#, INTF#, INTG#, INTH# as PCI"
- * bit 1=1 works for Aaron at VIA, bit 1=0 works for jakllsch
- * 0 Dynamic Clock Gating Main Switch (1=Enable)
+ * Bit | Meaning
+ * -------------
+ * 3 | Bypass APIC De-Assert Message (1=Enable)
+ * 1 | possibly "INTE#, INTF#, INTG#, INTH# as PCI"
+ * | bit 1=1 works for Aaron at VIA, bit 1=0 works for jakllsch
+ * 0 | Dynamic Clock Gating Main Switch (1=Enable)
*/
pci_write_config8(dev, 0x5b, 0xb);
@@ -410,7 +421,6 @@ static const struct device_operations vt8237r_lpc_ops_s = {
.scan_bus = scan_static_bus,
};
-
static const struct device_operations vt8237r_lpc_ops_r = {
.read_resources = vt8237r_read_resources,
.set_resources = pci_dev_set_resources,
diff --git a/src/southbridge/via/vt8237r/vt8237r_sata.c b/src/southbridge/via/vt8237r/vt8237r_sata.c
index 77d7b0c3e2..a445476265 100644
--- a/src/southbridge/via/vt8237r/vt8237r_sata.c
+++ b/src/southbridge/via/vt8237r/vt8237r_sata.c
@@ -39,37 +39,43 @@ static void sata_i_init(struct device *dev)
pci_write_config8(dev, PCI_CLASS_DEVICE, 0x1);
reg |= 0x80; /* Sub Class Write Protect on */
pci_write_config8(dev, SATA_MISC_CTRL, reg);
-
+
return;
}
-static void sata_ii_init(struct device *dev) {
+static void sata_ii_init(struct device *dev)
+{
u8 reg;
sata_i_init(dev);
-
- /* analog black magic, you may or may not need to adjust 0x60-0x6f, depends on PCB */
-
- /* Analog PHY - gen1
+
+ /*
+ * Analog black magic, you may or may not need to adjust 0x60-0x6f,
+ * depends on PCB.
+ */
+
+ /*
+ * Analog PHY - gen1
* CDR bandwidth [6:5] = 3
* Squelch Window Select [4:3] = 1
* CDR Charge Pump [2:0] = 1
*/
-
+
pci_write_config8(dev, 0x64, 0x49);
-
- /* adjust driver current source value to 9 */
+
+ /* Adjust driver current source value to 9. */
reg = pci_read_config8(dev, 0x65);
reg &= 0xf0;
reg |= 0x9;
pci_write_config8(dev, 0x65, reg);
-
- /* set all manual termination 50ohm bits [2:0] and enable [4] */
+
+ /* Set all manual termination 50ohm bits [2:0] and enable [4]. */
reg = pci_read_config8(dev, 0x6a);
reg |= 0xf;
pci_write_config8(dev, 0x6a, reg);
- /* Analog PHY - gen2
+ /*
+ * Analog PHY - gen2
* CDR bandwidth [5:4] = 2
* Pre / De-emphasis Level [7:6] controls bits [3:2], rest in 0x6e
* CDR Charge Pump [2:0] = 1
@@ -80,10 +86,10 @@ static void sata_ii_init(struct device *dev) {
reg |= 0x61;
pci_write_config8(dev, 0x6f, reg);
- /* check if staggered spinup is supported */
+ /* Check if staggered spinup is supported. */
reg = pci_read_config8(dev, 0x83);
if ((reg & 0x8) == 0) {
- /* start OOB sequence on both drives */
+ /* Start OOB sequence on both drives. */
reg |= 0x30;
pci_write_config8(dev, 0x83, reg);
}