Following patch adds support for resume on VT8237 based motherboards. The NB

part of this patch adds support for resume well NVRAM. In which DQS values are
stored.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4100 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

3 files changed, 78 insertions, 11 deletions

diff --git a/src/southbridge/via/k8t890/k8t890.h b/src/southbridge/via/k8t890/k8t890.h
index 9159b53d5c..59d47ee52c 100644
--- a/src/southbridge/via/k8t890/k8t890.h
+++ b/src/southbridge/via/k8t890/k8t890.h
@@ -29,6 +29,9 @@
  */
 #define K8T890_APIC_BASE	0xfecc0000
 
+/* The 256 bytes of NVRAM for S3 storage, 256B aligned */
+#define K8T890_NVRAM_IO_BASE	0xf00
+
 #define K8T890_MMCONFIG_MBAR	0x61
 #define K8T890_MULTIPLE_FN_EN	0x4f
 
@@ -36,6 +39,7 @@
 #define K8M890_FBSIZEMB		64
 
 #include <device/device.h>
+
 extern void writeback(struct device *dev, u16 where, u8 what);
 extern void dump_south(device_t dev);
 
diff --git a/src/southbridge/via/k8t890/k8t890_early_car.c b/src/southbridge/via/k8t890/k8t890_early_car.c
index a14e2a2715..4f53486ed0 100644
--- a/src/southbridge/via/k8t890/k8t890_early_car.c
+++ b/src/southbridge/via/k8t890/k8t890_early_car.c
@@ -23,6 +23,15 @@
  */
 
 #include <stdlib.h>
+//include "k8t890.h"
+#warning hack the right header here
+
+/* The 256 bytes of NVRAM for S3 storage, 256B aligned */
+#define K8T890_NVRAM_IO_BASE	0xf00
+#define K8T890_MULTIPLE_FN_EN	0x4f
+/* we provide S3 NVRAM to system */
+#define S3_NVRAM_EARLY	1
+
 
 /* AMD K8 LDT0, LDT1, LDT2 Link Control Registers */
 static ldtreg[3] = {0x86, 0xa6, 0xc6};
@@ -33,10 +42,22 @@ static ldtreg[3] = {0x86, 0xa6, 0xc6};
 
 u8 k8t890_early_setup_ht(void)
 {
-	u8 awidth, afreq, cldtfreq; 
+	u8 awidth, afreq, cldtfreq, reg;
 	u8 cldtwidth_in, cldtwidth_out, vldtwidth_in, vldtwidth_out, ldtnr, width;
 	u16 vldtcaps;
 
+	/* hack, enable NVRAM in chipset */
+	pci_write_config8(PCI_DEV(0, 0x0, 0), K8T890_MULTIPLE_FN_EN, 0x01);
+
+	/*
+	 * NVRAM I/O base at K8T890_NVRAM_IO_BASE
+	 */
+
+	pci_write_config8(PCI_DEV(0, 0x0, 2), 0xa2, (K8T890_NVRAM_IO_BASE >> 8));
+	reg = pci_read_config8(PCI_DEV(0, 0x0, 2), 0xa1);
+	reg |= 0x1;
+	pci_write_config8(PCI_DEV(0, 0x0, 2), 0xa1, reg);
+
 	/* check if connected non coherent, initcomplete (find the SB on K8 side) */
 	if (0x7 == pci_read_config8(PCI_DEV(0, 0x18, 0), 0x98)) {
 		ldtnr = 0;
@@ -90,3 +111,44 @@ u8 k8t890_early_setup_ht(void)
 
 	return 1;
 }
+
+int s3_save_nvram_early(u32 dword, int size, int  nvram_pos) {
+	
+	printk_debug("Writing %x of size %d to nvram pos: %d\n", dword, size, nvram_pos);
+	switch (size) {
+	case 1:
+		outb((dword & 0xff), K8T890_NVRAM_IO_BASE+nvram_pos);
+		nvram_pos +=1;
+		break;
+	case 2:
+		outw((dword & 0xffff), K8T890_NVRAM_IO_BASE+nvram_pos);
+		nvram_pos +=2;
+		break;
+	default:
+		outl(dword, K8T890_NVRAM_IO_BASE+nvram_pos);
+		nvram_pos +=4;
+		break;
+	}
+	return nvram_pos;
+}
+
+int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos) {
+	switch (size) {
+	case 1:
+		*old_dword &= ~0xff;
+		*old_dword |= inb(K8T890_NVRAM_IO_BASE+nvram_pos);
+		nvram_pos +=1;
+		break;
+	case 2:
+		*old_dword &= ~0xffff;
+		*old_dword |= inw(K8T890_NVRAM_IO_BASE+nvram_pos);
+		nvram_pos +=2;
+		break;
+	default:
+		*old_dword = inl(K8T890_NVRAM_IO_BASE+nvram_pos);
+		nvram_pos +=4;
+		break;
+	}
+	printk_debug("Loading %x of size %d to nvram pos:%d\n", * old_dword, size, nvram_pos-size);
+	return nvram_pos;
+}
diff --git a/src/southbridge/via/k8t890/k8t890_host_ctrl.c b/src/southbridge/via/k8t890/k8t890_host_ctrl.c
index 71f863bdc8..9ed89eba12 100644
--- a/src/southbridge/via/k8t890/k8t890_host_ctrl.c
+++ b/src/southbridge/via/k8t890/k8t890_host_ctrl.c
@@ -37,14 +37,14 @@ static void host_ctrl_enable_k8t890(struct device *dev)
 	 */
 	pci_write_config8(dev, 0xa0, 0x13);
 
-	/* Disable NVRAM and enable non-posted PCI writes. */
-	pci_write_config8(dev, 0xa1, 0x8e);
-
 	/*
-	 * NVRAM I/O base 0xe00-0xeff, but it is disabled.
+	 * NVRAM I/O base at K8T890_NVRAM_IO_BASE
 	 * Some bits are set and reserved.
 	 */
-	pci_write_config8(dev, 0xa2, 0x0e);
+	pci_write_config8(dev, 0xa2, (K8T890_NVRAM_IO_BASE >> 8));
+
+	/* enable NB NVRAM and enable non-posted PCI writes. */
+	pci_write_config8(dev, 0xa1, 0x8f);
 	/* Arbitration control, some bits are reserved. */
 	pci_write_config8(dev, 0xa5, 0x3c);
 
@@ -95,14 +95,15 @@ static void host_ctrl_enable_k8m890(struct device *dev) {
 	 */
 	pci_write_config8(dev, 0xa0, 0x13);
 
-	/* Disable NVRAM and enable non-posted PCI writes. */
-	pci_write_config8(dev, 0xa1, 0x8e);
-
 	/*
-	 * NVRAM I/O base 0xe00-0xeff, but it is disabled.
+	 * NVRAM I/O base at K8T890_NVRAM_IO_BASE
 	 */
 
-	pci_write_config8(dev, 0xa2, 0x0e);
+	pci_write_config8(dev, 0xa2, (K8T890_NVRAM_IO_BASE >> 8));
+
+	/* Enable NVRAM and enable non-posted PCI writes. */
+	pci_write_config8(dev, 0xa1, 0x8f);
+
 	/* Arbitration control  */
 	pci_write_config8(dev, 0xa5, 0x3c);