diff options
| author | Patrick Rudolph <patrick.rudolph@9elements.com> | 2023-09-22 09:01:00 +0200 |
|---|---|---|
| committer | Felix Held <felix-coreboot@felixheld.de> | 2023-10-11 13:41:33 +0000 |
| commit | 155a21974ab720f8b9f1bc832d65b203f2f14ac7 (patch) | |
| tree | b759f0f0ff3defd973c62c3402b2bc95a5217240 /src/southbridge/intel | |
| parent | 44a48ce7a46c36df69f7b2cf3552bf10fa5f61b6 (diff) | |
sb/intel/common/spi: Fix I/O alignment
On ICH9 the SPI control register is not naturally aligned
and a word write might be split into smaller naturally aligned
I/O transactions.
As the first byte starts a new SPI transfer, replace the existing
word write with two byte writes and write the second byte first.
This is required for platforms that do not support unaligned
word I/O instructions and would start a SPI transfer while the
second byte hasn't reached the control register yet.
TEST: Virtual SPI controller on qemu 8.0 doesn't start a transfer
early.
Change-Id: Id05b1a080911b71b94ef781c6e26d98165f02f67
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78090
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Diffstat (limited to 'src/southbridge/intel')
| -rw-r--r-- | src/southbridge/intel/common/spi.c | 22 |
1 files changed, 16 insertions, 6 deletions
diff --git a/src/southbridge/intel/common/spi.c b/src/southbridge/intel/common/spi.c index c984c6d435..93185d4884 100644 --- a/src/southbridge/intel/common/spi.c +++ b/src/southbridge/intel/common/spi.c @@ -93,7 +93,7 @@ struct ich_spi_controller { uint8_t *data; unsigned int databytes; uint8_t *status; - uint16_t *control; + uint8_t *control; /* Unaligned on ICH9 */ uint32_t *bbar; uint32_t *fpr; uint8_t fpr_max; @@ -300,7 +300,7 @@ void spi_init(void) cntlr.data = (uint8_t *)ich7_spi->spid; cntlr.databytes = sizeof(ich7_spi->spid); cntlr.status = (uint8_t *)&ich7_spi->spis; - cntlr.control = &ich7_spi->spic; + cntlr.control = (uint8_t *)&ich7_spi->spic; cntlr.bbar = &ich7_spi->bbar; cntlr.preop = &ich7_spi->preop; cntlr.fpr = &ich7_spi->pbr[0]; @@ -317,7 +317,7 @@ void spi_init(void) cntlr.data = (uint8_t *)ich9_spi->fdata; cntlr.databytes = sizeof(ich9_spi->fdata); cntlr.status = &ich9_spi->ssfs; - cntlr.control = (uint16_t *)ich9_spi->ssfc; + cntlr.control = ich9_spi->ssfc; cntlr.bbar = &ich9_spi->bbar; cntlr.preop = &ich9_spi->preop; cntlr.fpr = &ich9_spi->pr[0]; @@ -579,8 +579,13 @@ static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout, * bitesout size was 1, decremented to zero while executing * spi_setup_opcode() above. Tell the chip to send the * command. + * + * On ICH9 the control register is not natually aligned. + * Write the high byte first to prevent triggering a transfer + * when writing two bytes on the bus using outw instruction. */ - writew_(control, cntlr.control); + writeb_(control >> 8, &cntlr.control[1]); + writeb_(control, &cntlr.control[0]); /* wait for the result */ status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); @@ -636,8 +641,13 @@ static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout, control |= SPIC_DS; control |= (data_length - 1) << 8; - /* write it */ - writew_(control, cntlr.control); + /* + * On ICH9 the control register is not natually aligned. + * Write the high byte first to prevent triggering a transfer + * when writing two bytes on the bus using outw instruction. + */ + writeb_(control >> 8, &cntlr.control[1]); + writeb_(control, &cntlr.control[0]); /* Wait for Cycle Done Status or Flash Cycle Error. */ status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1); |