Support Intel SCH (Poulsbo) and add iwave/iWRainbowG6 board

which uses it.

Compiles, but not boot tested lately.
Many things missing (eg. SMM support, proper ACPI, ...)

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6198 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 418 insertions, 0 deletions

diff --git a/src/southbridge/intel/sch/smihandler.c b/src/southbridge/intel/sch/smihandler.c
new file mode 100644
index 0000000000..127f62772a
--- /dev/null
+++ b/src/southbridge/intel/sch/smihandler.c
@@ -0,0 +1,418 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/smm.h>
+#include "sch.h"
+
+#define DEBUG_SMI
+
+#define APM_CNT		0xb2
+#define APM_STS		0xb3
+#define   ACPI_DISABLE	0x1e
+#define   ACPI_ENABLE	0xe1
+
+/* I945 */
+#define SMRAM		0x9d
+#define   D_OPEN	(1 << 6)
+#define   D_CLS		(1 << 5)
+#define   D_LCK		(1 << 4)
+#define   G_SMRANE	(1 << 3)
+#define   C_BASE_SEG	((0 << 2) | (1 << 1) | (0 << 0))
+
+/* ICH7 */
+#define PM1_STS		0x00
+#define PM1_EN		0x02
+#define PM1_CNT		0x04
+#define PM1_TMR		0x08
+#define PROC_CNT	0x10
+#define LV2		0x14
+#define LV3		0x15
+#define LV4		0x16
+#define PM2_CNT		0x20 // mobile only
+#define GPE0_STS	0x28
+#define GPE0_EN		0x2c
+#define SMI_EN		0x30
+#define   EL_SMI_EN	 (1 << 25) // Intel Quick Resume Technology
+#define   INTEL_USB2_EN	 (1 << 18) // Intel-Specific USB2 SMI logic
+#define   LEGACY_USB2_EN (1 << 17) // Legacy USB2 SMI logic
+#define   PERIODIC_EN	 (1 << 14) // SMI on PERIODIC_STS in SMI_STS
+#define   TCO_EN	 (1 << 13) // Enable TCO Logic (BIOSWE et al)
+#define   MCSMI_EN	 (1 << 11) // Trap microcontroller range access
+#define   BIOS_RLS	 (1 <<  7) // asserts SCI on bit set
+#define   SWSMI_TMR_EN	 (1 <<  6) // start software smi timer on bit set
+#define   APMC_EN	 (1 <<  5) // Writes to APM_CNT cause SMI#
+#define   SLP_SMI_EN	 (1 <<  4) // Write to SLP_EN in PM1_CNT asserts SMI#
+#define   LEGACY_USB_EN  (1 <<  3) // Legacy USB circuit SMI logic
+#define   BIOS_EN	 (1 <<  2) // Assert SMI# on setting GBL_RLS bit
+#define   EOS		 (1 <<  1) // End of SMI (deassert SMI#)
+#define   GBL_SMI_EN	 (1 <<  0) // SMI# generation at all?
+#define SMI_STS		0x34
+#define ALT_GP_SMI_EN	0x38
+#define ALT_GP_SMI_STS	0x3a
+#define GPE_CNTL	0x42
+#define DEVACT_STS	0x44
+#define SS_CNT		0x50
+#define C3_RES		0x54
+
+//#include "i82801gx_nvs.h"
+
+/* While we read PMBASE dynamically in case it changed, let's
+ * initialize it with a sane value
+ */
+static u16 pmbase = DEFAULT_PMBASE;
+
+// disabled because SMM doesn't actually work yet
+#if 0
+/**
+ * @brief read and clear PM1_STS
+ * @return PM1_STS register
+ */
+static u16 reset_pm1_status(void)
+{
+	u16 reg16;
+
+	reg16 = inw(pmbase + PM1_STS);
+	/* set status bits are cleared by writing 1 to them */
+	outw(reg16, pmbase + PM1_STS);
+
+	return reg16;
+}
+
+static void dump_pm1_status(u16 pm1_sts)
+{
+	printk(BIOS_DEBUG, "PM1_STS: ");
+	if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK ");
+	if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK ");
+	if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR ");
+	if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC ");
+	if (pm1_sts & (1 <<  8)) printk(BIOS_DEBUG, "PWRBTN ");
+	if (pm1_sts & (1 <<  5)) printk(BIOS_DEBUG, "GBL ");
+	if (pm1_sts & (1 <<  4)) printk(BIOS_DEBUG, "BM ");
+	if (pm1_sts & (1 <<  0)) printk(BIOS_DEBUG, "TMROF ");
+	printk(BIOS_DEBUG, "\n");
+}
+
+/**
+ * @brief read and clear SMI_STS
+ * @return SMI_STS register
+ */
+static u32 reset_smi_status(void)
+{
+	u32 reg32;
+
+	reg32 = inl(pmbase + SMI_STS);
+	/* set status bits are cleared by writing 1 to them */
+	outl(reg32, pmbase + SMI_STS);
+
+	return reg32;
+}
+
+static void dump_smi_status(u32 smi_sts)
+{
+	printk(BIOS_DEBUG, "SMI_STS: ");
+	if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
+	if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
+	if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
+	if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
+	if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
+	if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
+	if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
+	if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
+	if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
+	if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
+	if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
+	if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
+	if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
+	if (smi_sts & (1 <<  9)) printk(BIOS_DEBUG, "GPE0 ");
+	if (smi_sts & (1 <<  8)) printk(BIOS_DEBUG, "PM1 ");
+	if (smi_sts & (1 <<  6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
+	if (smi_sts & (1 <<  5)) printk(BIOS_DEBUG, "APM ");
+	if (smi_sts & (1 <<  4)) printk(BIOS_DEBUG, "SLP_SMI ");
+	if (smi_sts & (1 <<  3)) printk(BIOS_DEBUG, "LEGACY_USB ");
+	if (smi_sts & (1 <<  2)) printk(BIOS_DEBUG, "BIOS ");
+	printk(BIOS_DEBUG, "\n");
+}
+
+
+/**
+ * @brief read and clear GPE0_STS
+ * @return GPE0_STS register
+ */
+static u32 reset_gpe0_status(void)
+{
+	u32 reg32;
+
+	reg32 = inl(pmbase + GPE0_STS);
+	/* set status bits are cleared by writing 1 to them */
+	outl(reg32, pmbase + GPE0_STS);
+
+	return reg32;
+}
+
+static void dump_gpe0_status(u32 gpe0_sts)
+{
+	int i;
+	printk(BIOS_DEBUG, "GPE0_STS: ");
+	for (i=31; i<= 16; i--) {
+		if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
+	}
+	if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
+	if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
+	if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
+	if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
+	if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
+	if (gpe0_sts & (1 <<  9)) printk(BIOS_DEBUG, "PCI_EXP ");
+	if (gpe0_sts & (1 <<  8)) printk(BIOS_DEBUG, "RI ");
+	if (gpe0_sts & (1 <<  7)) printk(BIOS_DEBUG, "SMB_WAK ");
+	if (gpe0_sts & (1 <<  6)) printk(BIOS_DEBUG, "TCO_SCI ");
+	if (gpe0_sts & (1 <<  5)) printk(BIOS_DEBUG, "AC97 ");
+	if (gpe0_sts & (1 <<  4)) printk(BIOS_DEBUG, "USB2 ");
+	if (gpe0_sts & (1 <<  3)) printk(BIOS_DEBUG, "USB1 ");
+	if (gpe0_sts & (1 <<  2)) printk(BIOS_DEBUG, "HOT_PLUG ");
+	if (gpe0_sts & (1 <<  0)) printk(BIOS_DEBUG, "THRM ");
+	printk(BIOS_DEBUG, "\n");
+}
+
+
+/**
+ * @brief read and clear TCOx_STS
+ * @return TCOx_STS registers
+ */
+static u32 reset_tco_status(void)
+{
+	u32 tcobase = pmbase + 0x60;
+	u32 reg32;
+
+	reg32 = inl(tcobase + 0x04);
+	/* set status bits are cleared by writing 1 to them */
+	outl(reg32 & ~(1<<18), tcobase + 0x04); //  Don't clear BOOT_STS before SECOND_TO_STS
+	if (reg32 & (1 << 18))
+		outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
+
+	return reg32;
+}
+
+
+static void dump_tco_status(u32 tco_sts)
+{
+	printk(BIOS_DEBUG, "TCO_STS: ");
+	if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
+	if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
+	if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
+	if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
+	if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
+	if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
+	if (tco_sts & (1 <<  9)) printk(BIOS_DEBUG, "DMISCI ");
+	if (tco_sts & (1 <<  8)) printk(BIOS_DEBUG, "BIOSWR ");
+	if (tco_sts & (1 <<  7)) printk(BIOS_DEBUG, "NEWCENTURY ");
+	if (tco_sts & (1 <<  3)) printk(BIOS_DEBUG, "TIMEOUT ");
+	if (tco_sts & (1 <<  2)) printk(BIOS_DEBUG, "TCO_INT ");
+	if (tco_sts & (1 <<  1)) printk(BIOS_DEBUG, "SW_TCO ");
+	if (tco_sts & (1 <<  0)) printk(BIOS_DEBUG, "NMI2SMI ");
+	printk(BIOS_DEBUG, "\n");
+}
+#endif
+
+
+/* We are using PCIe accesses for now
+ *  1. the chipset can do it
+ *  2. we don't need to worry about how we leave 0xcf8/0xcfc behind
+ */
+//#include "../../../northbridge/intel/i945/pcie_config.c"
+
+int southbridge_io_trap_handler(int smif)
+{
+	//global_nvs_t *gnvs = (global_nvs_t *)0xc00;
+
+	switch (smif) {
+	case 0x32:
+		printk(BIOS_DEBUG, "OS Init\n");
+		//gnvs->smif = 0;
+		break;
+	default:
+		/* Not handled */
+		return 0;
+	}
+
+	/* On success, the IO Trap Handler returns 0
+	 * On failure, the IO Trap Handler returns a value != 0
+	 *
+	 * For now, we force the return value to 0 and log all traps to
+	 * see what's going on.
+	 */
+	//gnvs->smif = 0;
+	return 1; /* IO trap handled */
+}
+
+/**
+ * @brief Set the EOS bit
+ */
+void southbridge_smi_set_eos(void)
+{
+	u8 reg8;
+
+	reg8 = inb(pmbase + SMI_EN);
+	reg8 |= EOS;
+	outb(reg8, pmbase + SMI_EN);
+}
+
+/**
+ * @brief Interrupt handler for SMI#
+ *
+ * @param smm_revision revision of the smm state save map
+ */
+
+void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save)
+{
+// FIXME: the necessary magic isn't available yet. the code
+// below is a partially adapted ICH7 version of the handler
+#if 0
+	u8 reg8;
+	u16 pmctrl;
+	u16 pm1_sts;
+	u32 smi_sts, gpe0_sts, tco_sts;
+
+	pmbase = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0x48) & 0xfffc;
+	printk(BIOS_SPEW, "SMI#: pmbase = 0x%04x\n", pmbase);
+
+	/* We need to clear the SMI status registers, or we won't see what's
+	 * happening in the following calls.
+	 */
+	smi_sts = reset_smi_status();
+	dump_smi_status(smi_sts);
+
+	if (smi_sts & (1 << 21)) { // MONITOR
+		global_nvs_t *gnvs = (global_nvs_t *)0xc00;
+		u32 reg32;
+
+		reg32 = RCBA32(0x1e00);  TRSR - Trap Status Register
+//#if 0
+		/* Comment in for some useful debug */
+		for (i=0; i<4; i++) {
+			if (reg32 & (1 << i)) {
+				printk(BIOS_DEBUG, "  io trap #%d\n", i);
+			}
+		}
+//#endif
+		RCBA32(0x1e00) = reg32;  TRSR
+
+		reg32 = RCBA32(0x1e10);
+
+		if ((reg32 & 0xfffc) != 0x808) {
+			printk(BIOS_DEBUG, "  trapped io address = 0x%x\n", reg32 & 0xfffc);
+			printk(BIOS_DEBUG, "  AHBE = %x\n", (reg32 >> 16) & 0xf);
+			printk(BIOS_DEBUG, "  read/write: %s\n", (reg32 & (1 << 24)) ? "read" :
+				"write");
+		}
+
+		if (!(reg32 & (1 << 24))) {
+			/* Write Cycle */
+			reg32 = RCBA32(0x1e18);
+			printk(BIOS_DEBUG, "  iotrap written data = 0x%08x\n", reg32);
+
+		}
+
+		if (gnvs->smif)
+			io_trap_handler(gnvs->smif); // call function smif
+	}
+
+	if (smi_sts & (1 << 13)) { // TCO
+		tco_sts = reset_tco_status();
+		dump_tco_status(tco_sts);
+
+		if (tco_sts & (1 << 8)) { // BIOSWR
+			u8 bios_cntl;
+			bios_cntl = pcie_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc);
+			if (bios_cntl & 1) {
+				/* BWE is RW, so the SMI was caused by a
+				 * write to BWE, not by a write to the BIOS
+				 */
+
+				/* This is the place where we notice someone
+				 * is trying to tinker with the BIOS. We are
+				 * trying to be nice and just ignore it. A more
+				 * resolute answer would be to power down the
+				 * box.
+				 */
+				printk(BIOS_DEBUG, "Switching back to RO\n");
+				pcie_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
+			} /* No else for now? */
+		}
+	}
+
+	if (smi_sts & (1 << 8)) { // PM1
+		pm1_sts = reset_pm1_status();
+		dump_pm1_status(pm1_sts);
+	}
+
+	if (smi_sts & (1 << 9)) { // GPE0
+		gpe0_sts = reset_gpe0_status();
+		dump_gpe0_status(gpe0_sts);
+	}
+
+	if (smi_sts & (1 << 5)) { // APM
+		/* Emulate B2 register as the FADT / Linux expects it */
+
+		reg8 = inb(0xb2);
+		switch (reg8) {
+		case ACPI_DISABLE:
+			pmctrl = inw(pmbase + 0x04);
+			pmctrl |= (1 << 0);
+			outw(pmctrl, pmbase + 0x04);
+			printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
+			break;
+		case ACPI_ENABLE:
+			pmctrl = inw(pmbase + 0x04);
+			pmctrl &= ~(1 << 0);
+			outw(pmctrl, pmbase + 0x04);
+			printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
+			break;
+		}
+	}
+
+	if (smi_sts & (1 << 4)) { // SLP_SMI
+		u32 reg32;
+
+		/* First, disable further SMIs */
+		reg8 = inb(pmbase + SMI_EN);
+		reg8 &= ~SLP_SMI_EN;
+		outb(reg8, pmbase + SMI_EN);
+
+		/* Next, do the deed, we should change
+		 * power on after power loss bits here
+		 * if we're going to S5
+		 */
+
+		/* Write back to the SLP register to cause the
+		 * originally intended event again. We need to set BIT13
+		 * (SLP_EN) though to make the sleep happen.
+		 */
+		reg32 = inl(pmbase + 0x04);
+		printk(BIOS_DEBUG, "SMI#: SLP = 0x%08x\n", reg32);
+		printk(BIOS_DEBUG, "SMI#: Powering off.\n");
+		outl(reg32 | (1 << 13), pmbase + 0x04);
+	}
+#endif
+}