sandy/ivy/nehalem: Remerge interrupt handling

On those chipsets the pins are just a legacy concept. Real interrupts are
messages on corresponding busses or some internal logic of chipset.
Hence interrupt routing isn't anymore board-specific (dependent on layout) but
depends only on configuration.
Rather than attempting to sync real config, ACPI and legacy descriptors, just
use the same interrupt routing per chipset covering all possible devices.

The only part which remains board-specific are LPC and PCI interrupts.

Interrupt balancing may suffer from such merge but:
a) Doesn't seem to be the case of this map on current systems
b) Almost all OS use MSI nowadays bypassing this stuff completely
c) If we want a good balancing we need to take into account that e.g.
   wlan card may be placed in a different slot and so would require complicated
   balancing on runtime. It's difficult to maintain with almost no benefit.

Change-Id: I9f63d1d338c5587ebac7a52093e5b924f6e5ca2d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7130
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

1 files changed, 68 insertions, 0 deletions

diff --git a/src/southbridge/intel/ibexpeak/madt.c b/src/southbridge/intel/ibexpeak/madt.c
new file mode 100644
index 0000000000..69a7b4b65b
--- /dev/null
+++ b/src/southbridge/intel/ibexpeak/madt.c
@@ -0,0 +1,68 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2013 Vladimir Serbinenko <phcoder@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/smp/mpspec.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+	/* Local APICs */
+	current = acpi_create_madt_lapics(current);
+
+	/* IOAPIC */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+					   1, IO_APIC_ADDR, 0);
+
+	/* INT_SRC_OVR */
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 0, 2,
+						MP_IRQ_POLARITY_DEFAULT |
+						MP_IRQ_TRIGGER_DEFAULT);
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 9, 9,
+						MP_IRQ_POLARITY_HIGH |
+						MP_IRQ_TRIGGER_LEVEL);
+
+	/* LAPIC_NMI */
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)
+					      current, 0,
+					      MP_IRQ_POLARITY_HIGH |
+					      MP_IRQ_TRIGGER_EDGE, 0x01);
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)
+					      current, 1, MP_IRQ_POLARITY_HIGH |
+					      MP_IRQ_TRIGGER_EDGE, 0x01);
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)
+					      current, 2, MP_IRQ_POLARITY_HIGH |
+					      MP_IRQ_TRIGGER_EDGE, 0x01);
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)
+					      current, 3, MP_IRQ_POLARITY_HIGH |
+					      MP_IRQ_TRIGGER_EDGE, 0x01);
+	return current;
+}