Revert "Add support for Intel Ibex Peak (Mobile 5) southbridge"

This reverts commit 0210119b4b95e84f954cfd6dc11aafbc187421af

Change-Id: I5be3f2a54394c592650a0dcd671e4a72ae796cb2
Reviewed-on: http://review.coreboot.org/3443
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 0 insertions, 103 deletions

diff --git a/src/southbridge/intel/ibexpeak/chip.h b/src/southbridge/intel/ibexpeak/chip.h
deleted file mode 100644
index 83248d5a9a..0000000000
--- a/src/southbridge/intel/ibexpeak/chip.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#ifndef SOUTHBRIDGE_INTEL_IBEXPEAK_CHIP_H
-#define SOUTHBRIDGE_INTEL_IBEXPEAK_CHIP_H
-
-struct southbridge_intel_ibexpeak_config {
-	/**
-	 * Interrupt Routing configuration
-	 * If bit7 is 1, the interrupt is disabled.
-	 */
-	uint8_t pirqa_routing;
-	uint8_t pirqb_routing;
-	uint8_t pirqc_routing;
-	uint8_t pirqd_routing;
-	uint8_t pirqe_routing;
-	uint8_t pirqf_routing;
-	uint8_t pirqg_routing;
-	uint8_t pirqh_routing;
-
-	/**
-	 * GPI Routing configuration
-	 *
-	 * Only the lower two bits have a meaning:
-	 * 00: No effect
-	 * 01: SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
-	 * 10: SCI (if corresponding GPIO_EN bit is also set)
-	 * 11: reserved
-	 */
-	uint8_t gpi0_routing;
-	uint8_t gpi1_routing;
-	uint8_t gpi2_routing;
-	uint8_t gpi3_routing;
-	uint8_t gpi4_routing;
-	uint8_t gpi5_routing;
-	uint8_t gpi6_routing;
-	uint8_t gpi7_routing;
-	uint8_t gpi8_routing;
-	uint8_t gpi9_routing;
-	uint8_t gpi10_routing;
-	uint8_t gpi11_routing;
-	uint8_t gpi12_routing;
-	uint8_t gpi13_routing;
-	uint8_t gpi14_routing;
-	uint8_t gpi15_routing;
-
-	uint32_t gpe0_en;
-	uint16_t alt_gp_smi_en;
-
-	/* IDE configuration */
-	uint32_t ide_legacy_combined;
-	uint32_t sata_ahci;
-	uint8_t sata_port_map;
-	uint32_t sata_port0_gen3_tx;
-	uint32_t sata_port1_gen3_tx;
-
-	/**
-	 * SATA Interface Speed Support Configuration
-	 *
-	 * Only the lower two bits have a meaning:
-	 * 00 - No effect (leave as chip default)
-	 * 01 - 1.5 Gb/s maximum speed
-	 * 10 - 3.0 Gb/s maximum speed
-	 * 11 - 6.0 Gb/s maximum speed
-	 */
-	uint8_t sata_interface_speed_support;
-
-	uint32_t gen1_dec;
-	uint32_t gen2_dec;
-	uint32_t gen3_dec;
-	uint32_t gen4_dec;
-
-	/* Enable linear PCIe Root Port function numbers starting at zero */
-	uint8_t pcie_port_coalesce;
-
-	/* Override PCIe ASPM */
-	uint8_t pcie_aspm_f0;
-	uint8_t pcie_aspm_f1;
-	uint8_t pcie_aspm_f2;
-	uint8_t pcie_aspm_f3;
-	uint8_t pcie_aspm_f4;
-	uint8_t pcie_aspm_f5;
-	uint8_t pcie_aspm_f6;
-	uint8_t pcie_aspm_f7;
-};
-
-#endif				/* SOUTHBRIDGE_INTEL_IBEXPEAK_CHIP_H */