mb/aopen/dxplplusu: Remove board

This board use the LEGACY_SMP_INIT which is to be deprecated after
release 4.18.

Change-Id: Idf37ade31ddb55697df1a65062c092a0a485e175
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69114
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

1 files changed, 0 insertions, 79 deletions

diff --git a/src/southbridge/intel/i82870/ioapic.c b/src/southbridge/intel/i82870/ioapic.c
deleted file mode 100644
index 65fecd10f8..0000000000
--- a/src/southbridge/intel/i82870/ioapic.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <arch/ioapic.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <assert.h>
-#include "82870.h"
-
-static int num_p64h2_ioapics = 0;
-
-static void p64h2_ioapic_enable(struct device *dev)
-{
-	/* We have to enable MEM and Bus Master for IOAPIC */
-	uint16_t command = PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-
-	pci_write_config16(dev, PCI_COMMAND, command);
-}
-
-/**
- * Configure one of the IOAPICs in a P64H2.
- *
- * Note that a PCI bus scan will detect both IOAPICs, so this function
- * will be called twice for each P64H2 in the system.
- *
- * @param dev PCI bus/device/function of P64H2 IOAPIC.
- *            NOTE: There are two IOAPICs per P64H2, at D28:F0 and D30:F0.
- */
-static void p64h2_ioapic_init(struct device *dev)
-{
-	uint32_t memoryBase;
-	int apic_index, apic_id;
-
-	apic_index = num_p64h2_ioapics;
-	num_p64h2_ioapics++;
-
-	// A note on IOAPIC addresses:
-	//  0 and 1 are used for the local APICs of the dual virtual
-	//  (hyper-threaded) CPUs of physical CPU 0 (devicetree.cb).
-	//  6 and 7 are used for the local APICs of the dual virtual
-	//  (hyper-threaded) CPUs of physical CPU 1 (devicetree.cb).
-	//  2 is used for the IOAPIC in the 82801 southbridge (hard-coded in i82801xx_lpc.c)
-
-	// Map APIC index into APIC ID
-	// IDs 3, 4, 5, and 8+ are available (see above note)
-
-	if (apic_index < 3)
-		apic_id = apic_index + 3;
-	else
-		apic_id = apic_index + 5;
-
-	ASSERT(apic_id < 16);       // ID is only 4 bits
-
-	// Read the MBAR address for setting up the IOAPIC in memory space
-	// NOTE: this address was assigned during enumeration of the bus
-
-	memoryBase = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
-
-	set_ioapic_id((void *)memoryBase, apic_id);
-
-	// Use Processor System Bus to deliver interrupts
-	ioapic_set_boot_config((void *)memoryBase, true);
-}
-
-static struct device_operations ioapic_ops = {
-	.read_resources   = pci_dev_read_resources,
-	.set_resources    = pci_dev_set_resources,
-	.enable_resources = pci_dev_enable_resources,
-	.init     = p64h2_ioapic_init,
-	.enable   = p64h2_ioapic_enable,
-};
-
-static const struct pci_driver ioapic_driver __pci_driver = {
-	.ops    = &ioapic_ops,
-	.vendor = PCI_VID_INTEL,
-	.device = PCI_DID_INTEL_82870_1E0,
-
-};