sb/intel/*: Use common SMBus functions

All Intel southbridges implement the same SMBus functions.
This patch replaces all these similar and mostly identical
implementations with a common file.

This also makes i2c block read available to all those southbridges.
If the northbridge has to read a lot of SPD bytes sequentially, using
this function can reduce the time being spent to read SPD five-fold.

Change-Id: I93bb186e04e8c32dff04fc1abe4b5ecbc4c9c962
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

1 files changed, 1 insertions, 147 deletions

diff --git a/src/southbridge/intel/i82801gx/smbus.c b/src/southbridge/intel/i82801gx/smbus.c
index d028f73367..fdf76a03e5 100644
--- a/src/southbridge/intel/i82801gx/smbus.c
+++ b/src/southbridge/intel/i82801gx/smbus.c
@@ -22,8 +22,8 @@
 #include <device/pci_ids.h>
 #include <device/pci_ops.h>
 #include <arch/io.h>
+#include <southbridge/intel/common/smbus.h>
 #include "i82801gx.h"
-#include "smbus.h"
 
 static int lsmbus_read_byte(device_t dev, u8 address)
 {
@@ -38,49 +38,6 @@ static int lsmbus_read_byte(device_t dev, u8 address)
 	return do_smbus_read_byte(res->base, device, address);
 }
 
-static int do_smbus_write_byte(unsigned int smbus_base, unsigned int device,
-			unsigned int address, unsigned int data)
-{
-	unsigned char global_status_register;
-
-	if (smbus_wait_until_ready(smbus_base) < 0)
-		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
-
-	/* Setup transaction */
-	/* Disable interrupts */
-	outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
-	/* Set the device I'm talking too */
-	outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD);
-	/* Set the command/address... */
-	outb(address & 0xff, smbus_base + SMBHSTCMD);
-	/* Set up for a byte data read */
-	outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x2 << 2),
-	     (smbus_base + SMBHSTCTL));
-	/* Clear any lingering errors, so the transaction will run */
-	outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
-
-	/* Clear the data byte... */
-	outb(data, smbus_base + SMBHSTDAT0);
-
-	/* Start the command */
-	outb((inb(smbus_base + SMBHSTCTL) | 0x40),
-	     smbus_base + SMBHSTCTL);
-
-	/* Poll for transaction completion */
-	if (smbus_wait_until_done(smbus_base) < 0)
-		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
-
-	global_status_register = inb(smbus_base + SMBHSTSTAT);
-
-	/* Ignore the "In Use" status... */
-	global_status_register &= ~(3 << 5);
-
-	/* Read results of transaction */
-	if (global_status_register != (1 << 1))
-		return SMBUS_ERROR;
-	return 0;
-}
-
 static int lsmbus_write_byte(device_t dev, u8 address, u8 data)
 {
 	u16 device;
@@ -93,58 +50,6 @@ static int lsmbus_write_byte(device_t dev, u8 address, u8 data)
 	return do_smbus_write_byte(res->base, device, address, data);
 }
 
-static int do_smbus_block_write(unsigned int smbus_base, unsigned int device,
-			      unsigned int cmd, unsigned int bytes, const u8 *buf)
-{
-	u8 status;
-
-	if (smbus_wait_until_ready(smbus_base) < 0)
-		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
-
-	/* Setup transaction */
-	/* Disable interrupts */
-	outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
-	/* Set the device I'm talking too */
-	outb(((device & 0x7f) << 1) & ~0x01, smbus_base + SMBXMITADD);
-	/* Set the command/address... */
-	outb(cmd & 0xff, smbus_base + SMBHSTCMD);
-	/* Set up for a block data write */
-	outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x5 << 2),
-	     (smbus_base + SMBHSTCTL));
-	/* Clear any lingering errors, so the transaction will run */
-	outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
-
-	/* set number of bytes to transfer */
-	outb(bytes, smbus_base + SMBHSTDAT0);
-
-	outb(*buf++, smbus_base + SMBBLKDAT);
-	bytes--;
-
-	/* Start the command */
-	outb((inb(smbus_base + SMBHSTCTL) | 0x40),
-	     smbus_base + SMBHSTCTL);
-
-	while (!(inb(smbus_base + SMBHSTSTAT) & 1))
-		;
-	/* Poll for transaction completion */
-	do {
-		status = inb(smbus_base + SMBHSTSTAT);
-		if (status & ((1 << 4) | /* FAILED */
-			      (1 << 3) | /* BUS ERR */
-			      (1 << 2))) /* DEV ERR */
-			return SMBUS_ERROR;
-
-		if (status & 0x80) { /* Byte done */
-			outb(*buf++, smbus_base + SMBBLKDAT);
-			outb(status, smbus_base + SMBHSTSTAT);
-		}
-	} while (status & 0x01);
-
-	return 0;
-}
-
-
-
 static int lsmbus_block_write(device_t dev, u8 cmd, u8 bytes, const u8 *buf)
 {
 	u16 device;
@@ -157,57 +62,6 @@ static int lsmbus_block_write(device_t dev, u8 cmd, u8 bytes, const u8 *buf)
 	return do_smbus_block_write(res->base, device, cmd, bytes, buf);
 }
 
-static int do_smbus_block_read(unsigned int smbus_base, unsigned int device,
-			      unsigned int cmd, unsigned int bytes, u8 *buf)
-{
-	u8 status;
-	int bytes_read = 0;
-	if (smbus_wait_until_ready(smbus_base) < 0)
-		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
-
-	/* Setup transaction */
-	/* Disable interrupts */
-	outb(inb(smbus_base + SMBHSTCTL) & (~1), smbus_base + SMBHSTCTL);
-	/* Set the device I'm talking too */
-	outb(((device & 0x7f) << 1) | 1, smbus_base + SMBXMITADD);
-	/* Set the command/address... */
-	outb(cmd & 0xff, smbus_base + SMBHSTCMD);
-	/* Set up for a block data read */
-	outb((inb(smbus_base + SMBHSTCTL) & 0xe3) | (0x5 << 2),
-	     (smbus_base + SMBHSTCTL));
-	/* Clear any lingering errors, so the transaction will run */
-	outb(inb(smbus_base + SMBHSTSTAT), smbus_base + SMBHSTSTAT);
-
-	/* Start the command */
-	outb((inb(smbus_base + SMBHSTCTL) | 0x40),
-	     smbus_base + SMBHSTCTL);
-
-	while (!(inb(smbus_base + SMBHSTSTAT) & 1))
-		;
-	/* Poll for transaction completion */
-	do {
-		status = inb(smbus_base + SMBHSTSTAT);
-		if (status & ((1 << 4) | /* FAILED */
-			      (1 << 3) | /* BUS ERR */
-			      (1 << 2))) /* DEV ERR */
-			return SMBUS_ERROR;
-
-		if (status & 0x80) { /* Byte done */
-			*buf = inb(smbus_base + SMBBLKDAT);
-			buf++;
-			bytes_read++;
-			outb(status, smbus_base + SMBHSTSTAT);
-			if (--bytes == 1) {
-				/* indicate that next byte is the last one */
-				outb(inb(smbus_base + SMBHSTCTL) | 0x20,
-					 smbus_base + SMBHSTCTL);
-			}
-		}
-	} while (status & 0x01);
-
-	return bytes_read;
-}
-
 static int lsmbus_block_read(device_t dev, u8 cmd, u8 bytes, u8 *buf)
 {
 	u16 device;