This does the following:

cd coreboot/src/southbridge
svn mv i82801ca i82801cx
svn mv i82801dbm i82801dx
svn mv i82801er i82801ex
svn copy i82801xx i82801bx
svn mv i82801xx i82801ax

Plus, fixing up the filenames in these directories and the romstage.c and
Kconfig files of the mainboards using those drivers.
Plus, switching the thomson ip1000 and rca rm4100 to the i82801dx driver.

There's a lot more to be done, like 
- adding device IDs for the ICH3 and newer drivers that have been kept in
  i82801xx so far
- drop the additional parts support from the ax and bx drivers.


Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Joseph Smith <joe@settoplinux.org>




git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5167 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 105 insertions, 0 deletions

diff --git a/src/southbridge/intel/i82801ex/i82801ex_smbus.h b/src/southbridge/intel/i82801ex/i82801ex_smbus.h
new file mode 100644
index 0000000000..861230e130
--- /dev/null
+++ b/src/southbridge/intel/i82801ex/i82801ex_smbus.h
@@ -0,0 +1,105 @@
+#include <device/smbus_def.h>
+
+#define SMBHSTSTAT 0x0
+#define SMBHSTCTL  0x2
+#define SMBHSTCMD  0x3
+#define SMBXMITADD 0x4
+#define SMBHSTDAT0 0x5
+#define SMBHSTDAT1 0x6
+#define SMBBLKDAT  0x7
+#define SMBTRNSADD 0x9
+#define SMBSLVDATA 0xa
+#define SMLINK_PIN_CTL 0xe
+#define SMBUS_PIN_CTL  0xf 
+
+#define SMBUS_TIMEOUT (100*1000*10)
+
+
+static void smbus_delay(void)
+{
+	outb(0x80, 0x80);
+}
+
+static int smbus_wait_until_ready(unsigned smbus_io_base)
+{
+	unsigned loops = SMBUS_TIMEOUT;
+	unsigned char byte;
+	do {
+		smbus_delay();
+		if (--loops == 0)
+			break;
+		byte = inb(smbus_io_base + SMBHSTSTAT);
+	} while(byte & 1);
+	return loops?0:-1;
+}
+
+static int smbus_wait_until_done(unsigned smbus_io_base)
+{
+	unsigned loops = SMBUS_TIMEOUT;
+	unsigned char byte;
+	do {
+	        smbus_delay();
+	        if (--loops == 0)
+	               break;
+	        byte = inb(smbus_io_base + SMBHSTSTAT);
+	} while((byte & 1) || (byte & ~((1<<6)|(1<<0))) == 0);
+	return loops?0:-1;
+}
+
+static int smbus_wait_until_blk_done(unsigned smbus_io_base)
+{
+	unsigned loops = SMBUS_TIMEOUT;
+	unsigned char byte;
+	do {
+	        smbus_delay();
+	        if (--loops == 0)
+	               break;
+	        byte = inb(smbus_io_base + SMBHSTSTAT);
+	} while((byte&(1<<7)) == 0);
+	return loops?0:-1;
+}
+
+static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
+{
+	unsigned char global_status_register;
+	unsigned char byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+	}
+	/* setup transaction */
+	/* disable interrupts */
+	outb(inb(smbus_io_base + SMBHSTCTL) & (~1), smbus_io_base + SMBHSTCTL);
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBXMITADD);
+	/* set the command/address... */
+	outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+	/* set up for a byte data read */
+	outb((inb(smbus_io_base + SMBHSTCTL) & 0xE3) | (0x2 << 2), smbus_io_base + SMBHSTCTL);
+	/* clear any lingering errors, so the transaction will run */
+	outb(inb(smbus_io_base + SMBHSTSTAT), smbus_io_base + SMBHSTSTAT);
+
+	/* clear the data byte...*/
+	outb(0, smbus_io_base + SMBHSTDAT0);
+
+	/* start the command */
+	outb((inb(smbus_io_base + SMBHSTCTL) | 0x40), smbus_io_base + SMBHSTCTL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+	}
+
+	global_status_register = inb(smbus_io_base + SMBHSTSTAT);
+
+	/* Ignore the In Use Status... */
+	global_status_register &= ~(3 << 5);
+
+	/* read results of transaction */
+	byte = inb(smbus_io_base + SMBHSTDAT0);
+	if (global_status_register != (1 << 1)) {
+		return SMBUS_ERROR;
+	}
+	return byte;
+}
+