first round name simplification. drop the <component>_ prefix.

the prefix was introduced in the early v2 tree many years ago
because our old build system "newconfig" could not handle two files with
the same name in different paths like /path/to/usb.c and
/another/path/to/usb.c correctly. Only one of the files would end up
being compiled into the final image.

Since Kconfig (actually since shortly before we switched to Kconfig) we
don't suffer from that problem anymore. So we could drop the sb700_
prefix from all those filenames (or, the <componentname>_ prefix in general)

- makes it easier to fork off a new chipset
- makes it easier to diff against other chipsets
- storing redundant information in filenames seems wrong

Signed-off-by: <stepan@coresystems.de>

Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 667 insertions, 0 deletions

diff --git a/src/southbridge/intel/i82801dx/smihandler.c b/src/southbridge/intel/i82801dx/smihandler.c
new file mode 100644
index 0000000000..4875ba7480
--- /dev/null
+++ b/src/southbridge/intel/i82801dx/smihandler.c
@@ -0,0 +1,667 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <console/console.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/smm.h>
+#include <device/pci_def.h>
+#include "i82801dx.h"
+
+#define DEBUG_SMI
+
+#define APM_CNT		0xb2
+#define   CST_CONTROL	0x85
+#define   PST_CONTROL	0x80
+#define   ACPI_DISABLE	0x1e
+#define   ACPI_ENABLE	0xe1
+#define   GNVS_UPDATE   0xea
+#define   MBI_UPDATE    0xeb
+#define APM_STS		0xb3
+
+/* I830M */
+#define SMRAM		0x90
+#define   D_OPEN	(1 << 6)
+#define   D_CLS		(1 << 5)
+#define   D_LCK		(1 << 4)
+#define   G_SMRANE	(1 << 3)
+#define   C_BASE_SEG	((0 << 2) | (1 << 1) | (0 << 0))
+
+#include "nvs.h"
+
+/* While we read PMBASE dynamically in case it changed, let's
+ * initialize it with a sane value
+ */
+u16 pmbase = PMBASE_ADDR;
+u8 smm_initialized = 0;
+
+unsigned char *mbi = NULL;
+u32 mbi_len;
+u8 mbi_initialized = 0;
+
+/* GNVS needs to be updated by an 0xEA PM Trap (B2) after it has been located
+ * by coreboot.
+ */
+global_nvs_t *gnvs = (global_nvs_t *)0x0;
+void *tcg = (void *)0x0;
+void *smi1 = (void *)0x0;
+
+/**
+ * @brief read and clear PM1_STS
+ * @return PM1_STS register
+ */
+static u16 reset_pm1_status(void)
+{
+	u16 reg16;
+
+	reg16 = inw(pmbase + PM1_STS);
+	/* set status bits are cleared by writing 1 to them */
+	outw(reg16, pmbase + PM1_STS);
+
+	return reg16;
+}
+
+static void dump_pm1_status(u16 pm1_sts)
+{
+	printk(BIOS_SPEW, "PM1_STS: ");
+	if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK ");
+	if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK ");
+	if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR ");
+	if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC ");
+	if (pm1_sts & (1 <<  8)) printk(BIOS_SPEW, "PWRBTN ");
+	if (pm1_sts & (1 <<  5)) printk(BIOS_SPEW, "GBL ");
+	if (pm1_sts & (1 <<  4)) printk(BIOS_SPEW, "BM ");
+	if (pm1_sts & (1 <<  0)) printk(BIOS_SPEW, "TMROF ");
+	printk(BIOS_SPEW, "\n");
+	int reg16 = inw(pmbase + PM1_EN);
+	printk(BIOS_SPEW, "PM1_EN: %x\n", reg16);
+}
+
+/**
+ * @brief read and clear SMI_STS
+ * @return SMI_STS register
+ */
+static u32 reset_smi_status(void)
+{
+	u32 reg32;
+
+	reg32 = inl(pmbase + SMI_STS);
+	/* set status bits are cleared by writing 1 to them */
+	outl(reg32, pmbase + SMI_STS);
+
+	return reg32;
+}
+
+static void dump_smi_status(u32 smi_sts)
+{
+	printk(BIOS_DEBUG, "SMI_STS: ");
+	if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
+	if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
+	if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
+	if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
+	if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
+	if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
+	if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
+	if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
+	if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
+	if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
+	if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
+	if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
+	if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
+	if (smi_sts & (1 <<  9)) printk(BIOS_DEBUG, "GPE0 ");
+	if (smi_sts & (1 <<  8)) printk(BIOS_DEBUG, "PM1 ");
+	if (smi_sts & (1 <<  6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
+	if (smi_sts & (1 <<  5)) printk(BIOS_DEBUG, "APM ");
+	if (smi_sts & (1 <<  4)) printk(BIOS_DEBUG, "SLP_SMI ");
+	if (smi_sts & (1 <<  3)) printk(BIOS_DEBUG, "LEGACY_USB ");
+	if (smi_sts & (1 <<  2)) printk(BIOS_DEBUG, "BIOS ");
+	printk(BIOS_DEBUG, "\n");
+}
+
+
+/**
+ * @brief read and clear GPE0_STS
+ * @return GPE0_STS register
+ */
+static u32 reset_gpe0_status(void)
+{
+	u32 reg32;
+
+	reg32 = inl(pmbase + GPE0_STS);
+	/* set status bits are cleared by writing 1 to them */
+	outl(reg32, pmbase + GPE0_STS);
+
+	return reg32;
+}
+
+static void dump_gpe0_status(u32 gpe0_sts)
+{
+	int i;
+	printk(BIOS_DEBUG, "GPE0_STS: ");
+	for (i=31; i<= 16; i--) {
+		if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
+	}
+	if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
+	if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
+	if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
+	if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
+	if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
+	if (gpe0_sts & (1 <<  9)) printk(BIOS_DEBUG, "PCI_EXP ");
+	if (gpe0_sts & (1 <<  8)) printk(BIOS_DEBUG, "RI ");
+	if (gpe0_sts & (1 <<  7)) printk(BIOS_DEBUG, "SMB_WAK ");
+	if (gpe0_sts & (1 <<  6)) printk(BIOS_DEBUG, "TCO_SCI ");
+	if (gpe0_sts & (1 <<  5)) printk(BIOS_DEBUG, "AC97 ");
+	if (gpe0_sts & (1 <<  4)) printk(BIOS_DEBUG, "USB2 ");
+	if (gpe0_sts & (1 <<  3)) printk(BIOS_DEBUG, "USB1 ");
+	if (gpe0_sts & (1 <<  2)) printk(BIOS_DEBUG, "HOT_PLUG ");
+	if (gpe0_sts & (1 <<  0)) printk(BIOS_DEBUG, "THRM ");
+	printk(BIOS_DEBUG, "\n");
+}
+
+
+/**
+ * @brief read and clear TCOx_STS
+ * @return TCOx_STS registers
+ */
+static u32 reset_tco_status(void)
+{
+	u32 tcobase = pmbase + 0x60;
+	u32 reg32;
+
+	reg32 = inl(tcobase + 0x04);
+	/* set status bits are cleared by writing 1 to them */
+	outl(reg32 & ~(1<<18), tcobase + 0x04); //  Don't clear BOOT_STS before SECOND_TO_STS
+	if (reg32 & (1 << 18))
+		outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
+
+	return reg32;
+}
+
+
+static void dump_tco_status(u32 tco_sts)
+{
+	printk(BIOS_DEBUG, "TCO_STS: ");
+	if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
+	if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
+	if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
+	if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
+	if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
+	if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
+	if (tco_sts & (1 <<  9)) printk(BIOS_DEBUG, "DMISCI ");
+	if (tco_sts & (1 <<  8)) printk(BIOS_DEBUG, "BIOSWR ");
+	if (tco_sts & (1 <<  7)) printk(BIOS_DEBUG, "NEWCENTURY ");
+	if (tco_sts & (1 <<  3)) printk(BIOS_DEBUG, "TIMEOUT ");
+	if (tco_sts & (1 <<  2)) printk(BIOS_DEBUG, "TCO_INT ");
+	if (tco_sts & (1 <<  1)) printk(BIOS_DEBUG, "SW_TCO ");
+	if (tco_sts & (1 <<  0)) printk(BIOS_DEBUG, "NMI2SMI ");
+	printk(BIOS_DEBUG, "\n");
+}
+
+/* We are using PCIe accesses for now
+ *  1. the chipset can do it
+ *  2. we don't need to worry about how we leave 0xcf8/0xcfc behind
+ */
+// #include "../../../northbridge/intel/i945/pcie_config.c"
+
+int southbridge_io_trap_handler(int smif)
+{
+	switch (smif) {
+	case 0x32:
+		printk(BIOS_DEBUG, "OS Init\n");
+		/* gnvs->smif:
+		 *  On success, the IO Trap Handler returns 0
+		 *  On failure, the IO Trap Handler returns a value != 0
+		 */
+		gnvs->smif = 0;
+		return 1; /* IO trap handled */
+	}
+
+	/* Not handled */
+	return 0;
+}
+
+/**
+ * @brief Set the EOS bit
+ */
+void southbridge_smi_set_eos(void)
+{
+	u8 reg8;
+
+	reg8 = inb(pmbase + SMI_EN);
+	reg8 |= EOS;
+	outb(reg8, pmbase + SMI_EN);
+}
+
+static void busmaster_disable_on_bus(int bus)
+{
+        int slot, func;
+        unsigned int val;
+        unsigned char hdr;
+
+        for (slot = 0; slot < 0x20; slot++) {
+                for (func = 0; func < 8; func++) {
+                        u32 reg32;
+                        device_t dev = PCI_DEV(bus, slot, func);
+
+                        val = pci_read_config32(dev, PCI_VENDOR_ID);
+
+                        if (val == 0xffffffff || val == 0x00000000 ||
+                            val == 0x0000ffff || val == 0xffff0000)
+                                continue;
+
+                        /* Disable Bus Mastering for this one device */
+                        reg32 = pci_read_config32(dev, PCI_COMMAND);
+                        reg32 &= ~PCI_COMMAND_MASTER;
+                        pci_write_config32(dev, PCI_COMMAND, reg32);
+
+                        /* If this is a bridge, then follow it. */
+                        hdr = pci_read_config8(dev, PCI_HEADER_TYPE);
+                        hdr &= 0x7f;
+                        if (hdr == PCI_HEADER_TYPE_BRIDGE ||
+                            hdr == PCI_HEADER_TYPE_CARDBUS) {
+                                unsigned int buses;
+                                buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
+                                busmaster_disable_on_bus((buses >> 8) & 0xff);
+                        }
+                }
+        }
+}
+
+
+static void southbridge_smi_sleep(unsigned int node, smm_state_save_area_t *state_save)
+{
+	u8 reg8;
+	u32 reg32;
+	u8 slp_typ;
+	/* FIXME: the power state on boot should be read from
+	 * CMOS or even better from GNVS. Right now it's hard
+	 * coded at compile time.
+	 */
+	u8 s5pwr = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+
+	/* First, disable further SMIs */
+	reg8 = inb(pmbase + SMI_EN);
+	reg8 &= ~SLP_SMI_EN;
+	outb(reg8, pmbase + SMI_EN);
+
+	/* Figure out SLP_TYP */
+	reg32 = inl(pmbase + PM1_CNT);
+	printk(BIOS_SPEW, "SMI#: SLP = 0x%08x\n", reg32);
+	slp_typ = (reg32 >> 10) & 7;
+
+	/* Next, do the deed.
+	 */
+
+	switch (slp_typ) {
+	case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break;
+	case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break;
+	case 5:
+		printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n");
+		/* Invalidate the cache before going to S3 */
+		wbinvd();
+		break;
+	case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break;
+	case 7:
+		printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
+
+		outl(0, pmbase + GPE0_EN);
+
+		/* Should we keep the power state after a power loss?
+		 * In case the setting is "ON" or "OFF" we don't have
+		 * to do anything. But if it's "KEEP" we have to switch
+		 * to "OFF" before entering S5.
+		 */
+		if (s5pwr == MAINBOARD_POWER_KEEP) {
+			reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3);
+			reg8 |= 1;
+			pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8);
+		}
+
+		/* also iterates over all bridges on bus 0 */
+		busmaster_disable_on_bus(0);
+		break;
+	default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break;
+	}
+
+	/* Write back to the SLP register to cause the originally intended
+	 * event again. We need to set BIT13 (SLP_EN) though to make the
+	 * sleep happen.
+	 */
+	outl(reg32 | SLP_EN, pmbase + PM1_CNT);
+
+	/* In most sleep states, the code flow of this function ends at
+	 * the line above. However, if we entered sleep state S1 and wake
+	 * up again, we will continue to execute code in this function.
+	 */
+	reg32 = inl(pmbase + PM1_CNT);
+	if (reg32 & SCI_EN) {
+		/* The OS is not an ACPI OS, so we set the state to S0 */
+		reg32 &= ~(SLP_EN | SLP_TYP);
+		outl(reg32, pmbase + PM1_CNT);
+	}
+}
+
+static void southbridge_smi_apmc(unsigned int node, smm_state_save_area_t *state_save)
+{
+	u32 pmctrl;
+	u8 reg8;
+
+	/* Emulate B2 register as the FADT / Linux expects it */
+
+	reg8 = inb(APM_CNT);
+	switch (reg8) {
+	case CST_CONTROL:
+		/* Calling this function seems to cause
+		 * some kind of race condition in Linux
+		 * and causes a kernel oops
+		 */
+		printk(BIOS_DEBUG, "C-state control\n");
+		break;
+	case PST_CONTROL:
+		/* Calling this function seems to cause
+		 * some kind of race condition in Linux
+		 * and causes a kernel oops
+		 */
+		printk(BIOS_DEBUG, "P-state control\n");
+		break;
+	case ACPI_DISABLE:
+		pmctrl = inl(pmbase + PM1_CNT);
+		pmctrl &= ~SCI_EN;
+		outl(pmctrl, pmbase + PM1_CNT);
+		printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
+		break;
+	case ACPI_ENABLE:
+		pmctrl = inl(pmbase + PM1_CNT);
+		pmctrl |= SCI_EN;
+		outl(pmctrl, pmbase + PM1_CNT);
+		printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
+		break;
+	case GNVS_UPDATE:
+		if (smm_initialized) {
+			printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n");
+			return;
+		}
+		gnvs = *(global_nvs_t **)0x500;
+		tcg  = *(void **)0x504;
+		smi1 = *(void **)0x508;
+		smm_initialized = 1;
+		printk(BIOS_DEBUG, "SMI#: Setting up structures to %p, %p, %p\n", gnvs, tcg, smi1);
+		break;
+	case MBI_UPDATE: // FIXME
+		if (mbi_initialized) {
+			printk(BIOS_DEBUG, "SMI#: mbi already registered!\n");
+			return;
+		}
+		mbi = *(void **)0x500;
+		mbi_len = *(u32 *)0x504;
+		mbi_initialized = 1;
+		printk(BIOS_DEBUG, "SMI#: Registered MBI at %p (%d bytes)\n", mbi, mbi_len);
+		break;
+
+	default:
+		printk(BIOS_DEBUG, "SMI#: Unknown function APM_CNT=%02x\n", reg8);
+	}
+}
+
+static void southbridge_smi_pm1(unsigned int node, smm_state_save_area_t *state_save)
+{
+	u16 pm1_sts;
+
+	pm1_sts = reset_pm1_status();
+	dump_pm1_status(pm1_sts);
+
+	/* While OSPM is not active, poweroff immediately
+	 * on a power button event.
+	 */
+	if (pm1_sts & PWRBTN_STS) {
+		// power button pressed
+		u32 reg32;
+		reg32 = (7 << 10) | (1 << 13);
+		outl(reg32, pmbase + PM1_CNT);
+	}
+}
+
+static void southbridge_smi_gpe0(unsigned int node, smm_state_save_area_t *state_save)
+{
+	u32 gpe0_sts;
+
+	gpe0_sts = reset_gpe0_status();
+	dump_gpe0_status(gpe0_sts);
+}
+
+static void southbridge_smi_gpi(unsigned int node, smm_state_save_area_t *state_save)
+{
+	u16 reg16;
+	reg16 = inw(pmbase + ALT_GP_SMI_STS);
+	outl(reg16, pmbase + ALT_GP_SMI_STS);
+
+	reg16 &= inw(pmbase + ALT_GP_SMI_EN);
+
+	if (mainboard_smi_gpi) {
+		mainboard_smi_gpi(reg16);
+	} else {
+		if (reg16)
+			printk(BIOS_DEBUG, "GPI (mask %04x)\n",reg16);
+	}
+}
+
+static void southbridge_smi_mc(unsigned int node, smm_state_save_area_t *state_save)
+{
+	u32 reg32;
+
+	reg32 = inl(pmbase + SMI_EN);
+
+	/* Are periodic SMIs enabled? */
+	if ((reg32 & MCSMI_EN) == 0)
+		return;
+
+	printk(BIOS_DEBUG, "Microcontroller SMI.\n");
+}
+
+
+
+static void southbridge_smi_tco(unsigned int node, smm_state_save_area_t *state_save)
+{
+	u32 tco_sts;
+
+	tco_sts = reset_tco_status();
+
+	/* Any TCO event? */
+	if (!tco_sts)
+		return;
+
+	if (tco_sts & (1 << 8)) { // BIOSWR
+		u8 bios_cntl;
+
+		bios_cntl = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0xdc);
+
+		if (bios_cntl & 1) {
+			/* BWE is RW, so the SMI was caused by a
+			 * write to BWE, not by a write to the BIOS
+			 */
+
+			/* This is the place where we notice someone
+			 * is trying to tinker with the BIOS. We are
+			 * trying to be nice and just ignore it. A more
+			 * resolute answer would be to power down the
+			 * box.
+			 */
+			printk(BIOS_DEBUG, "Switching back to RO\n");
+			pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
+		} /* No else for now? */
+	} else if (tco_sts & (1 << 3)) { /* TIMEOUT */
+		/* Handle TCO timeout */
+		printk(BIOS_DEBUG, "TCO Timeout.\n");
+	} else if (!tco_sts) {
+		dump_tco_status(tco_sts);
+	}
+}
+
+static void southbridge_smi_periodic(unsigned int node, smm_state_save_area_t *state_save)
+{
+	u32 reg32;
+
+	reg32 = inl(pmbase + SMI_EN);
+
+	/* Are periodic SMIs enabled? */
+	if ((reg32 & PERIODIC_EN) == 0)
+		return;
+
+	printk(BIOS_DEBUG, "Periodic SMI.\n");
+}
+
+static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *state_save)
+{
+#define IOTRAP(x) (trap_sts & (1 << x))
+#if 0
+	u32 trap_sts, trap_cycle;
+	u32 data, mask = 0;
+	int i;
+
+	trap_sts = RCBA32(0x1e00); // TRSR - Trap Status Register
+	RCBA32(0x1e00) = trap_sts; // Clear trap(s) in TRSR
+
+	trap_cycle = RCBA32(0x1e10);
+	for (i=16; i<20; i++) {
+		if (trap_cycle & (1 << i))
+			mask |= (0xff << ((i - 16) << 2));
+	}
+
+
+	/* IOTRAP(3) SMI function call */
+	if (IOTRAP(3)) {
+		if (gnvs && gnvs->smif)
+			io_trap_handler(gnvs->smif); // call function smif
+		return;
+	}
+
+	/* IOTRAP(2) currently unused
+	 * IOTRAP(1) currently unused */
+
+	/* IOTRAP(0) SMIC */
+	if (IOTRAP(0)) {
+		if (!(trap_cycle & (1 << 24))) { // It's a write
+			printk(BIOS_DEBUG, "SMI1 command\n");
+			data = RCBA32(0x1e18);
+			data &= mask;
+			// if (smi1)
+			// 	southbridge_smi_command(data);
+			// return;
+		}
+		// Fall through to debug
+	}
+
+	printk(BIOS_DEBUG, "  trapped io address = 0x%x\n", trap_cycle & 0xfffc);
+	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
+	printk(BIOS_DEBUG, "  AHBE = %x\n", (trap_cycle >> 16) & 0xf);
+	printk(BIOS_DEBUG, "  MASK = 0x%08x\n", mask);
+	printk(BIOS_DEBUG, "  read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
+
+	if (!(trap_cycle & (1 << 24))) {
+		/* Write Cycle */
+		data = RCBA32(0x1e18);
+		printk(BIOS_DEBUG, "  iotrap written data = 0x%08x\n", data);
+	}
+#endif
+#undef IOTRAP
+}
+
+typedef void (*smi_handler_t)(unsigned int node,
+		smm_state_save_area_t *state_save);
+
+smi_handler_t southbridge_smi[32] = {
+	NULL,			  //  [0] reserved
+	NULL,			  //  [1] reserved
+	NULL,			  //  [2] BIOS_STS
+	NULL,			  //  [3] LEGACY_USB_STS
+	southbridge_smi_sleep,	  //  [4] SLP_SMI_STS
+	southbridge_smi_apmc,	  //  [5] APM_STS
+	NULL,			  //  [6] SWSMI_TMR_STS
+	NULL,			  //  [7] reserved
+	southbridge_smi_pm1,	  //  [8] PM1_STS
+	southbridge_smi_gpe0,	  //  [9] GPE0_STS
+	southbridge_smi_gpi,	  // [10] GPI_STS
+	southbridge_smi_mc,	  // [11] MCSMI_STS
+	NULL,			  // [12] DEVMON_STS
+	southbridge_smi_tco,	  // [13] TCO_STS
+	southbridge_smi_periodic, // [14] PERIODIC_STS
+	NULL,			  // [15] SERIRQ_SMI_STS
+	NULL,			  // [16] SMBUS_SMI_STS
+	NULL,			  // [17] LEGACY_USB2_STS
+	NULL,			  // [18] INTEL_USB2_STS
+	NULL,			  // [19] reserved
+	NULL,			  // [20] PCI_EXP_SMI_STS
+	southbridge_smi_monitor,  // [21] MONITOR_STS
+	NULL,			  // [22] reserved
+	NULL,			  // [23] reserved
+	NULL,			  // [24] reserved
+	NULL,			  // [25] EL_SMI_STS
+	NULL,			  // [26] SPI_STS
+	NULL,			  // [27] reserved
+	NULL,			  // [28] reserved
+	NULL,			  // [29] reserved
+	NULL,			  // [30] reserved
+	NULL			  // [31] reserved
+};
+
+/**
+ * @brief Interrupt handler for SMI#
+ *
+ * @param smm_revision revision of the smm state save map
+ */
+
+void southbridge_smi_handler(unsigned int node, smm_state_save_area_t *state_save)
+{
+	int i, dump = 0;
+	u32 smi_sts;
+
+	/* Update global variable pmbase */
+	pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc;
+
+	/* We need to clear the SMI status registers, or we won't see what's
+	 * happening in the following calls.
+	 */
+	smi_sts = reset_smi_status();
+
+	/* Filter all non-enabled SMI events */
+	// FIXME Double check, this clears MONITOR
+	// smi_sts &= inl(pmbase + SMI_EN);
+
+	/* Call SMI sub handler for each of the status bits */
+	for (i = 0; i < 31; i++) {
+		if (smi_sts & (1 << i)) {
+			if (southbridge_smi[i])
+				southbridge_smi[i](node, state_save);
+			else {
+				printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no "
+						"handler available.\n", i);
+				dump = 1;
+			}
+		}
+	}
+
+	if(dump) {
+		dump_smi_status(smi_sts);
+	}
+
+}