diff options
author | stepan <stepan@coresystems.de> | 2010-12-08 05:42:47 +0000 |
---|---|---|
committer | Stefan Reinauer <stepan@openbios.org> | 2010-12-08 05:42:47 +0000 |
commit | 836ae29ee325b1e3d28ff59468cc50913b1e24ce (patch) | |
tree | e2691a1e1ee1d795ffe7a99fb93778a9910044c2 /src/southbridge/intel/i82801dx/i82801dx_lpc.c | |
parent | 1bc5ccac51d94cfb4f9666ecf2cac619d8dc80a6 (diff) |
first round name simplification. drop the <component>_ prefix.
the prefix was introduced in the early v2 tree many years ago
because our old build system "newconfig" could not handle two files with
the same name in different paths like /path/to/usb.c and
/another/path/to/usb.c correctly. Only one of the files would end up
being compiled into the final image.
Since Kconfig (actually since shortly before we switched to Kconfig) we
don't suffer from that problem anymore. So we could drop the sb700_
prefix from all those filenames (or, the <componentname>_ prefix in general)
- makes it easier to fork off a new chipset
- makes it easier to diff against other chipsets
- storing redundant information in filenames seems wrong
Signed-off-by: <stepan@coresystems.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/intel/i82801dx/i82801dx_lpc.c')
-rw-r--r-- | src/southbridge/intel/i82801dx/i82801dx_lpc.c | 347 |
1 files changed, 0 insertions, 347 deletions
diff --git a/src/southbridge/intel/i82801dx/i82801dx_lpc.c b/src/southbridge/intel/i82801dx/i82801dx_lpc.c deleted file mode 100644 index 768e70096b..0000000000 --- a/src/southbridge/intel/i82801dx/i82801dx_lpc.c +++ /dev/null @@ -1,347 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Linux Networx - * Copyright (C) 2004 SuSE Linux AG - * Copyright (C) 2004 Tyan Computer - * Copyright (C) 2010 Joseph Smith <joe@settoplinux.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; version 2 of - * the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include <pc80/mc146818rtc.h> -#include <pc80/isa-dma.h> -#include <arch/io.h> -#include <arch/ioapic.h> -#include "i82801dx.h" - -#define NMI_OFF 0 - -typedef struct southbridge_intel_i82801dx_config config_t; - -static void i82801dx_enable_ioapic(struct device *dev) -{ - u32 reg32; - volatile u32 *ioapic_index = (volatile u32 *)(IO_APIC_ADDR); - volatile u32 *ioapic_data = (volatile u32 *)(IO_APIC_ADDR + 0x10); - - /* Set ACPI base address (I/O space). */ - pci_write_config32(dev, PMBASE, (PMBASE_ADDR | 1)); - - /* Enable ACPI I/O and power management. */ - pci_write_config8(dev, ACPI_CNTL, 0x10); - - reg32 = pci_read_config32(dev, GEN_CNTL); - reg32 |= (3 << 7); /* Enable IOAPIC */ - reg32 |= (1 << 13); /* Coprocessor error enable */ - reg32 |= (1 << 1); /* Delayed transaction enable */ - reg32 |= (1 << 2); /* DMA collection buffer enable */ - pci_write_config32(dev, GEN_CNTL, reg32); - printk(BIOS_DEBUG, "IOAPIC Southbridge enabled %x\n", reg32); - - *ioapic_index = 0; - *ioapic_data = (1 << 25); - - *ioapic_index = 0; - reg32 = *ioapic_data; - printk(BIOS_DEBUG, "Southbridge APIC ID = %x\n", reg32); - if (reg32 != (1 << 25)) - die("APIC Error\n"); - - *ioapic_index = 3; /* Select Boot Configuration register. */ - *ioapic_data = 1; /* Use Processor System Bus to deliver interrupts. */ -} - -static void i82801dx_enable_serial_irqs(struct device *dev) -{ - /* Set packet length and toggle silent mode bit. */ - pci_write_config8(dev, SERIRQ_CNTL, - (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); - pci_write_config8(dev, SERIRQ_CNTL, - (1 << 7) | (0 << 6) | ((21 - 17) << 2) | (0 << 0)); -} - -static void i82801dx_pirq_init(device_t dev) -{ - /* Get the chip configuration */ - config_t *config = dev->chip_info; - - pci_write_config8(dev, PIRQA_ROUT, config->pirqa_routing); - pci_write_config8(dev, PIRQB_ROUT, config->pirqb_routing); - pci_write_config8(dev, PIRQC_ROUT, config->pirqc_routing); - pci_write_config8(dev, PIRQD_ROUT, config->pirqd_routing); - pci_write_config8(dev, PIRQE_ROUT, config->pirqe_routing); - pci_write_config8(dev, PIRQF_ROUT, config->pirqf_routing); - pci_write_config8(dev, PIRQG_ROUT, config->pirqg_routing); - pci_write_config8(dev, PIRQH_ROUT, config->pirqh_routing); -} - -static void i82801dx_power_options(device_t dev) -{ - u8 reg8; - u16 reg16, pmbase; - u32 reg32; - const char *state; - - int pwr_on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL; - int nmi_option; - - /* Which state do we want to goto after g3 (power restored)? - * 0 == S0 Full On - * 1 == S5 Soft Off - * - * If the option is not existent (Laptops), use MAINBOARD_POWER_ON. - */ - if (get_option(&pwr_on, "power_on_after_fail") < 0) - pwr_on = MAINBOARD_POWER_ON; - - reg8 = pci_read_config8(dev, GEN_PMCON_3); - reg8 &= 0xfe; - switch (pwr_on) { - case MAINBOARD_POWER_OFF: - reg8 |= 1; - state = "off"; - break; - case MAINBOARD_POWER_ON: - reg8 &= ~1; - state = "on"; - break; - case MAINBOARD_POWER_KEEP: - reg8 &= ~1; - state = "state keep"; - break; - default: - state = "undefined"; - } - - reg8 &= ~(1 << 3); /* minimum asssertion is 1 to 2 RTCCLK */ - - pci_write_config8(dev, GEN_PMCON_3, reg8); - printk(BIOS_INFO, "Set power %s after power failure.\n", state); - - /* Set up NMI on errors. */ - reg8 = inb(0x61); - reg8 &= 0x0f; /* Higher Nibble must be 0 */ - reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ - // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ - reg8 |= (1 << 2); /* PCI SERR# Disable for now */ - outb(reg8, 0x61); - - reg8 = inb(0x70); - nmi_option = NMI_OFF; - get_option(&nmi_option, "nmi"); - if (nmi_option) { - printk(BIOS_INFO, "NMI sources enabled.\n"); - reg8 &= ~(1 << 7); /* Set NMI. */ - } else { - printk(BIOS_INFO, "NMI sources disabled.\n"); - reg8 |= ( 1 << 7); /* Disable NMI. */ - } - outb(reg8, 0x70); - - /* Set SMI# rate down and enable CPU_SLP# */ - reg16 = pci_read_config16(dev, GEN_PMCON_1); - reg16 &= ~(3 << 0); // SMI# rate 1 minute - reg16 |= (1 << 5); // CPUSLP_EN Desktop only - pci_write_config16(dev, GEN_PMCON_1, reg16); - - pmbase = pci_read_config16(dev, 0x40) & 0xfffe; - - /* Set up power management block and determine sleep mode */ - reg32 = inl(pmbase + 0x04); // PM1_CNT - - reg32 &= ~(7 << 10); // SLP_TYP - reg32 |= (1 << 0); // SCI_EN - outl(reg32, pmbase + 0x04); -} - -static void gpio_init(device_t dev) -{ - /* This should be done in romstage.c already */ - pci_write_config32(dev, GPIO_BASE, (GPIOBASE_ADDR | 1)); - pci_write_config8(dev, GPIO_CNTL, 0x10); -} - -static void i82801dx_rtc_init(struct device *dev) -{ - u8 reg8; - u32 reg32; - int rtc_failed; - - reg8 = pci_read_config8(dev, GEN_PMCON_3); - rtc_failed = reg8 & RTC_BATTERY_DEAD; - if (rtc_failed) { - reg8 &= ~(1 << 1); /* Preserve the power fail state. */ - pci_write_config8(dev, GEN_PMCON_3, reg8); - } - reg32 = pci_read_config32(dev, GEN_STS); - rtc_failed |= reg32 & (1 << 2); - rtc_init(rtc_failed); - - /* Enable access to the upper 128 byte bank of CMOS RAM. */ - pci_write_config8(dev, RTC_CONF, 0x04); -} - -static void i82801dx_lpc_route_dma(struct device *dev, u8 mask) -{ - u16 reg16; - int i; - - reg16 = pci_read_config16(dev, PCI_DMA_CFG); - reg16 &= 0x300; - for (i = 0; i < 8; i++) { - if (i == 4) - continue; - reg16 |= ((mask & (1 << i)) ? 3 : 1) << (i * 2); - } - pci_write_config16(dev, PCI_DMA_CFG, reg16); -} - -static void i82801dx_lpc_decode_en(device_t dev) -{ - /* Decode 0x3F8-0x3FF (COM1) for COMA port, 0x2F8-0x2FF (COM2) for COMB. - * LPT decode defaults to 0x378-0x37F and 0x778-0x77F. - * Floppy decode defaults to 0x3F0-0x3F5, 0x3F7. - * We also need to set the value for LPC I/F Enables Register. - */ - pci_write_config8(dev, COM_DEC, 0x10); - pci_write_config16(dev, LPC_EN, 0x300F); -} - -/* ICH4 does not mention HPET in the docs, but - * all ICH3 and ICH4 do have HPETs built in. - */ -static void enable_hpet(struct device *dev) -{ - u32 reg32, hpet, val; - - /* Set HPET base address and enable it */ - printk(BIOS_DEBUG, "Enabling HPET at 0x%x\n", HPET_ADDR); - reg32 = pci_read_config32(dev, GEN_CNTL); - /* - * Bit 17 is HPET enable bit. - * Bit 16:15 control the HPET base address. - */ - reg32 &= ~(3 << 15); /* Clear it */ - - hpet = HPET_ADDR >> 12; - hpet &= 0x3; - - reg32 |= (hpet << 15); - reg32 |= (1 << 17); /* Enable HPET. */ - pci_write_config32(dev, GEN_CNTL, reg32); - - /* Check to see whether it took */ - reg32 = pci_read_config32(dev, GEN_CNTL); - val = reg32 >> 15; - val &= 0x7; - - if ((val & 0x4) && (hpet == (val & 0x3))) { - printk(BIOS_INFO, "HPET enabled at 0x%x\n", HPET_ADDR); - } else { - printk(BIOS_WARNING, "HPET was not enabled correctly\n"); - reg32 &= ~(1 << 17); /* Clear Enable */ - pci_write_config32(dev, GEN_CNTL, reg32); - } -} - -static void lpc_init(struct device *dev) -{ - /* Set the value for PCI command register. */ - pci_write_config16(dev, PCI_COMMAND, 0x000f); - - /* IO APIC initialization. */ - i82801dx_enable_ioapic(dev); - - i82801dx_enable_serial_irqs(dev); - - /* Setup the PIRQ. */ - i82801dx_pirq_init(dev); - - /* Setup power options. */ - i82801dx_power_options(dev); - - /* Set the state of the GPIO lines. */ - gpio_init(dev); - - /* Initialize the real time clock. */ - i82801dx_rtc_init(dev); - - /* Route DMA. */ - i82801dx_lpc_route_dma(dev, 0xff); - - /* Initialize ISA DMA. */ - isa_dma_init(); - - /* Setup decode ports and LPC I/F enables. */ - i82801dx_lpc_decode_en(dev); - - /* Initialize the High Precision Event Timers */ - enable_hpet(dev); -} - -static void i82801dx_lpc_read_resources(device_t dev) -{ - struct resource *res; - - /* Get the normal PCI resources of this device. */ - pci_dev_read_resources(dev); - - /* Add an extra subtractive resource for both memory and I/O. */ - res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); - res->base = 0; - res->size = 0x1000; - res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); - res->base = 0xff800000; - res->size = 0x00800000; /* 8 MB for flash */ - res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | - IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = IO_APIC_ADDR; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; -} - -static struct device_operations lpc_ops = { - .read_resources = i82801dx_lpc_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = lpc_init, - .scan_bus = scan_static_bus, - .enable = i82801dx_enable, -}; - -/* 82801DB/DBL */ -static const struct pci_driver lpc_driver_db __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801DB_LPC, -}; - -/* 82801DBM */ -static const struct pci_driver lpc_driver_dbm __pci_driver = { - .ops = &lpc_ops, - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_82801DBM_LPC, -}; |